Theoretical study of the H + HCN → H + HNC process

We present a theoretical study on the detailed mechanism and kinetics of the H+HCN →H+HNC process. The potential energy surface was calculated at the complete basis set quantum chemical method, CBS-QB3. The vibrational frequencies and geometries for four isomers (H₂CN, cis-HCNH, trans-HCNH, CNH₂), and seven saddle points (TSn where n = 1 ? 7) are very important and must be considered during the process of formation of the HNC in the reaction were calculated at the B3LYP/6-311G(2d,d,p) level, within CBS-QB3 method. Three different pathways (PW1, PW2, and PW3) were analyzed and the results from the potential energy surface calculations were used to solve the master equation. The results were employed to calculate the thermal rate constant and pathways branching ratio of the title reaction over the temperature range of 300 up to 3000 K. The rate constants for reaction H + HCN → H + HNC were fitted by the modified Arrhenius expressions. Our calculations indicate that the formation of the HNC preferentially occurs via formation of cis–HCNH, the fitted expression is k _{P W2}(T) = 9.98 × 10^?22 T ^2.41 exp(?7.62 kcal.mol^?1/R T) while the predicted overall rate constant k _{O v e r a l l} (T) = 9.45 × 10^?21 T ^2.15 exp(?8.56 kcal.mol^?1/R T) in cm ³ molecule ^?1 s ^?1.

Open image in new window

Graphical Abstract (a) Potential energy surface, (b) thermal rate constants as a function of temperature and (c) the branching ratios (%) of PW1, PW2, PW3 pathways involved in rm H + HCN → H + HNC process.

     

Architectures,electronic structures,and stabilities of Cu-doped Ge<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> clusters: density functional modeling

The present study reports the geometries, electronic structures, growth behavior, and stabilities of neutral and ionized copper-doped germanium clusters containing 1–20 Ge atoms within the framework of linear combination of atomic orbitals density functional theory (DFT) under the spin-polarized generalized gradient approximation. It was found that Cu-capped Ge _n (or Cu-substituted Ge _n+1) and Cu-encapsulated Ge _n clusters mostly occur in the ground state at a particular cluster size (n). In order to explain the relative stabilities of the ground-state clusters, parameters such as the average binding energy per atom (BE), the embedding energy (EE), and the fragmentation energy (FE) of the clusters were calculated, and the resulting values are discussed. To explain the chemical stabilities of the clusters, parameters such as the energy gap between the highest occupied and the lowest unoccupied molecular orbitals (the HOMO–LUMO gap), the ionization energy (IP), the electron affinity (EA), the chemical potential (μ), the chemical hardness (η), and the polarizability were calculated, and the resulting values are also discussed. Natural atomic orbital (NAO) and natural bond orbital (NBO) analyses were also used to determine the electron-counting rule that should be applied to the most stable Ge₁₀Cu cluster. Finally, the relevance of the calculated results to the design of Ge-based superatoms is discussed.

Open image in new window Open image in new window

Figure Contributions of the valance orbitals of the Ge and Cu atom(s) to the HOMO of the ground-state icosahedral Ge₁₀Cu cluster obtained from NBO analysis. The numbers below the clusters represent the occupancies of the HOMO orbitals

     

Mesophyll conductance to CO<Subscript>2</Subscript> in leaves of Siebold’s beech (<Emphasis Type="Italic">Fagus crenata</Emphasis>) seedlings under elevated ozone

Ozone is an air pollutant that negatively affects photosynthesis in woody plants. Previous studies suggested that ozone-induced reduction in photosynthetic rates is mainly attributable to a decrease of maximum carboxylation rate (V_cmax) and/or maximum electron transport rate (J_max) estimated from response of net photosynthetic rate (A) to intercellular CO₂ concentration (C_i) (A/C_i curve) assuming that mesophyll conductance for CO₂ diffusion (g_m) is infinite. Although it is known that C_i-based V_cmax and J_max are potentially influenced by g_m, its contribution to ozone responses in C_i-based V_cmax and J_max is still unclear. In the present study, therefore, we analysed photosynthetic processes including g_m in leaves of Siebold’s beech (Fagus crenata) seedlings grown under three levels of ozone (charcoal-filtered air or ozone at 1.0- or 1.5-times ambient concentration) for two growing seasons in 2016–2017. Leaf gas exchange and chlorophyll fluorescence were simultaneously measured in July and September of the second growing season. We determined the A, stomatal conductance to water vapor and g_m, and analysed A/C_i curve and A/C_c curve (C_c: chloroplast CO₂ concentration). We also determined the Rubisco and chlorophyll contents in leaves. In September, ozone significantly decreased C_i-based V_cmax. At the same time, ozone decreased g_m, whereas there was no significant effect of ozone on C_c-based V_cmax or the contents of Rubisco and chlorophyll in leaves. These results suggest that ozone-induced reduction in C_i-based V_cmax is a result of the decrease in g_m rather than in carboxylation capacity. The decrease in g_m by elevated ozone was offset by an increase in C_i, and C_c did not differ depending on ozone treatment. Since C_c-based V_cmax was also similar, A was not changed by elevated ozone. We conclude that g_m is an important factor for reduction in C_i-based V_cmax of Siebold’s beech under elevated ozone.     

Performance of wave function and density functional methods for water hydrogen bond spin–spin coupling constants

Spin–spin coupling constants in water monomer and dimer have been calculated using several wave function and density functional-based methods. CCSD, MCSCF, and SOPPA wave functions methods yield similar results, specially when an additive approach is used with the MCSCF. Several functionals have been used to analyze their performance with the Jacob’s ladder and a set of functionals with different HF exchange were tested. Functionals with large HF exchange appropriately predict ¹ J _{O H} , ² J _{H H} and ^2h J _{O O} couplings, while ^1h J _{O H} is better calculated with functionals that include a reduced fraction of HF exchange. Accurate functionals for ¹ J _{O H} and ² J _{H H} have been tested in a tetramer water model. The hydrogen bond effects on these intramolecular couplings are additive when they are calculated by SOPPA(CCSD) wave function and DFT methods.

Open image in new window

Graphical Abstract Evaluation of the additive effect of the hydrogen bond on spin-spin coupling constants of water using WF and DFT methods.

     

Theoretical investigation on exciton-dissociation and charge-recombination processes of PC<Subscript>61</Subscript>BM-PTDPPSe interface

Designing and synthesizing novel electron-donor polymers with the high photovoltaic performances has remained a major challenge and hot issue in organic electronics. In this work, the exciton-dissociation (k _dis ) and charge-recombination (k _rec ) rates for the PC₆₁BM-PTDPPSe system as a promising polymer-based solar cell candidate have been theoretically investigated by means of density functional theory (DFT) calculations coupled with the non-adiabatic Marcus charge transfer model. Moreover, a series of regression analysis has been carried out to explore the rational structure–property relationship. Results reveal that the PC₆₁BM-PTDPPSe system possesses the large open-circuit voltage (0.77 V), middle-sized exiton binding energy (0.457 eV), and relatively small reorganization energies in exciton-dissociation (0.273 eV) and charge-recombination (0.530 eV) processes. With the Marcus model, the k _dis , k _rec , and the radiative decay rate (k _s ), are estimated to be 3.167×10¹¹ s^?1, 3.767×10¹⁰ s^?1, and 7.930×10⁸ s^?1 respectively in the PC₆₁BM-PTDPPSe interface. Comparably, the k _dis is as 1～3 orders of magnitude larger than the k _rec and the k _s , which indicates a fast and efficient photoinduced exciton-dissociation process in the PC₆₁BM-PTDPPSe interface.

Open image in new window

Graphical Abstract PTDPPSe is predicted to be a promising electron donor polymer, and the PC₆₁BM-PTDPPSe system is worthy of further device research by experiments.

     

Biocidal effect of (<Emphasis Type="Italic">E</Emphasis>)-anethole on the cyanobacterium <Emphasis Type="Italic">Aphanizomenon gracile</Emphasis> Lemmermann

Biocidal natural substances of botanical origin offer a promising ecofriendly option for controlling toxic cyanobacteria. Herein, we study 11 essential oils and some of their major components for their activity on Aphanizomenon gracile. On the basis of our results we support that Origanum vulgare and O. dictamnus, Ocimum basilicum, Eucalyptus meliodora, Melissa officinalis, and Pimpinella anisum exhibited the strongest activities, and the IC_50/1d values of the extracts were calculated to be between 168.43 and 241.97 μg mL^?1. When the major components of the biocidal essential oils were tested individually, (E)-anethole was found active, exhibiting an IC_50/1d value of 71.35 μg mL^?1. On the other hand, the half-life (t _1/2 ) of (E)-anethole was calculated at 1 h. A preliminary attempt of (E)-anethole microencapsulation was conducted, in order to slowly release this biocidal agent, increasing the residual life under open air conditions and thus the biological activity. Results were promising since the microencapsulated product exhibited better activity than did the non-formulated (E)-anethole. This is a first report on the biocidal activity of EOs and (E)-anethole on A. gracile and a preliminary indication of the microencapsulated (E)-anethole potential use as a natural biocidal in fresh waters.

Open image in new window

Graphical abstract Filaments of Aphanizomenon gracile capable of bloom forming (strain SAG 31.79, in a batch culture) and (E)-anethole

     

Modeling zigzag CNT: dependence of structural and electronic properties on length,and application to encapsulation of HCN and C<Subscript>2</Subscript>H<Subscript>2</Subscript>

Density functional theory (B3LYP, B3LYP-D2 and wB97XD functionals) was used in finite models of zigzag carbon nanotubes (CNT), (n,0)×k with n?=?6–9 and k?=?2–4, to systematically investigate the effects of size on their structural and electronic properties. We found that the ratio between the length (L _t) and the diameter (d _t) of the pristine CNT has to be larger than 2, i.e., L _t/d _t?>?2, in order to provide the observed experimental trends of C=C bond distances, as well as to maintain the atomic charges nearly constant and zero around the center of the tube. Therefore, the concepts of useful length and volume were developed and tested for the encapsulation process of HCN and C₂H₂ into CNTs. The energies involved in these processes, as well as the changes in molecular structure and electronic properties of the dopants and the CNTs are discussed and rationalized by the amount of charge transferred between dopant and CNT.

Open image in new window

Graphical Abstract Illustration of zigzag CNT length and diameter ratio in order to represent C=C bond experimental trend

     

The use of parameters of chlorophyll <Emphasis Type="Italic">a</Emphasis> fluorescence induction to evaluate the state of plants under anthropogenic load

The physiological state of the leaves of the small-leaved linden (Tilia cordata), silver birch (Betula pendula), and northern white cedar (Thuja occidentalis) under urban conditions was assessed via recording the kinetics of chlorophyll under fluorescence induction. Different sensitivities of the plants to adverse growing conditions were revealed. The most sensitive parameters of the fluorescence JIP test, viz., PI _ABS , F _V/F ₀, and F _V/F _M, were identified as indicators of the physiological state of the urban phytocoenosis. Recommendations for the application of the method for monitoring studies are presented.     

Probing the catalytic site of rabbit muscle glycogen phosphorylase using a series of specifically modified maltohexaose derivatives

Glycogen phosphorylase (GP) is an allosteric enzyme whose catalytic site comprises six subsites (SG₁, SG_?1, SG_?2, SG_?3, SG_?4, and SP) that are complementary to tandem five glucose residues and one inorganic phosphate molecule, respectively. In the catalysis of GP, the nonreducing-end glucose (Glc) of the maltooligosaccharide substrate binds to SG₁ and is then phosphorolyzed to yield glucose 1-phosphate. In this study, we probed the catalytic site of rabbit muscle GP using pyridylaminated-maltohexaose (Glcα1–4Glcα1–4Glcα1–4Glcα1–4Glcα1–4GlcPA, where GlcPA = 1-deoxy-1-[(2-pyridyl)amino]-D-glucitol]; abbreviated as PA-0) and a series of specifically modified PA-0 derivatives (Glc _m -AltNAc-Glc _n -GlcPA, where m + n = 4 and AltNAc is 3-acetoamido-3-deoxy-D-altrose). PA-0 served as an efficient substrate for GP, whereas the other PA-0 derivatives were not as good as the PA-0, indicating that substrate recognition by all the SG₁ –SG_?4 subsites was important for the catalysis of GP. By comparing the initial reaction rate toward the PA-0 derivatives (V _derivative) with that toward PA-0 (V _PA-0), we found that the value of V _derivative/V _PA-0 decreased significantly as the level of allosteric activation of GP increased. These results suggest that some conformational changes have taken place in the maltooligosaccharide-binding region of the GP catalytic site during allosteric regulation.     

DFT study of nano zinc/copper voltaic cells

To facilitate the development of new materials for use in batteries, it is necessary to develop ab initio full-electron computational techniques for modeling potential new battery materials. Here, we tested density functional theory procedures that are accurate enough to obtain the energetics of a zinc/copper voltaic cell. We found the magnitude of the zero-point energy correction to be 0.01–0.2 kcal/mol per atom or molecule and the magnitude of the dispersion correction to be 0.1–0.6 kcal/mol per atom or molecule for Zn _n , (H₂O) _n , \( \mathrm{Zn}{\left({\mathrm{H}}_2\mathrm{O}\right)}_n^{2+} \), \( \mathrm{Cu}{\left({\mathrm{H}}_2\mathrm{O}\right)}_n^{2+} \), and Cu _n . Counterpoise correction significantly affected the values of ?\( {E}_n^{\mathrm{abs}} \), ?\( {E}_n^{\mathrm{coh}} \), and ?E^solv by 1.0–3.1 kcal/mol per atom or molecule at the B3PW91/6-31G(d) level of theory, but by only 0.04–0.4 kcal/mol per atom or molecule at the B3PW91/cc-pVTZ level of theory. The application of B3PW91/6-31G(d) yielded results that differed from macroscopic experimental values by 0.1–7.1 kcal/mol per atom or molecule, whereas applying B3PW91/cc-pVTZ produced results that differed from macroscopic experimental values by 0.1–4.8 kcal/mol per atom or molecule, with the smallest differences occurring for reactions with a small macroscopic experimental ?E and the largest differences occurring for reactions with a large macroscopic experimental ?E, implying size consistency.     

Enzymological properties of endo-(1–4)-β-glucanase Eg12p of <Emphasis Type="Italic">Penicillium canescens</Emphasis> and characteristics of structural gene <Emphasis Type="Italic">egl2</Emphasis>

Gene egl2 of secreted endo-(1–4)-β-glucanase of glycosyl hydrolase family 5 of the mycelial fungus Penicillium canescens was cloned. The gene was expressed in P. canescens under control of a strong promoter of the bgaS gene encoding β-galactosidase of P. canescens, and endoglucanase producing strains were obtained. Chromatographically purified recombinant 48 kDa protein had pH and temperature optima 3.4 and 60°C, respectively, exhibited specific activity of 33 IU, and had K _m and V _max in CM-cellulose hydrolysis of 10.28 g/liter and 0.26 μmol/sec per mg, respectively.     

Mechanism for phenanthridines synthesis by nitrogenation of 2-acetylbiphenyls in acidic solution: a DFT study

The mechanism of phenanthridines synthesis from the nitrogenation of 2-acetylbiphenyls (1) by TMSN₃ in TFA has been studied by DFT calculations. Results at the B3LYP/6-311G(d) level showed that: 1) reaction of TMSN₃/HN₃ with the protonated form of 1 (1H⁺), which generates the key intermediate C ^x+ by removal of TMSOH/H₂O, is the rate determining step, and TMSN₃ as the nitrogen source is certainly preferred over HN₃. 2) from C ^x+, the two pathways leading to 2 ^x H⁺ and 3 ^x H⁺ are both thermodynamically and kinetically feasible and competitive to each other. 3) The high barriers of the reverse reactions suggest that the ratio of the final products 2 ^x :3 ^x is determined by the branching ratio of reaction rates of C ^x+ to intermediates D ^x+ in pass_I and E ^x+ in pass_II.

Open image in new window

Graphical Abstract DFT results indicate that the replacement of -OH by -N₃ which generates C ^x+ controls the consumption rate of 1 ^x H⁺, and the ratio of C ^x+ transforms to D ^x+ and C ^x+ transforms to E ^x+ (k:k') determines the final ratio of products 2x:3x.

     

Bonding,aromaticity, and planar tetracoordinated carbon in Si<Subscript>2</Subscript>CH<Subscript>2</Subscript> and Ge<Subscript>2</Subscript>CH<Subscript>2</Subscript>

Natural bond orbital (NBO) analyses and dissected nucleus-independent chemical shifts (NICS _{π z z} ) were computed to evaluate the bonding (bond type, electron occupation, hybridization) and aromatic character of the three lowest-lying Si₂CH₂ (1-Si, 2-Si, 3-Si) and Ge₂CH₂ (1-Ge, 2-Ge, 3-Ge) isomers. While their carbon C₃H₂ analogs favor classical alkene, allene, and alkyne type bonding, these Si and Ge derivatives are more polarizable and can favor “highly electron delocalized”? and “non-classical”? structures. The lowest energy Si ₂CH₂ and Ge ₂CH₂ isomers, 1-Si and 1-Ge, exhibit two sets of 3–center 2–electron (3c-2e) bonding; a π-3c-2e bond involving the heavy atoms (C–Si–Si and C–Ge–Ge), and a σ-3c-2e bond (Si–H–Si, Ge–H–Ge). Both 3-Si and 3-Ge exhibit π and σ-3c-2e bonding involving a planar tetracoordinated carbon (ptC) center. Despite their highly electron delocalized nature, all of the Si₂CH₂ and Ge₂CH₂ isomers considered display only modest two π electron aromatic character (NICS(0) _{π z z} =--6.2 to –8.9 ppm, computed at the heavy atom ring center) compared to the cyclic-C ₃H₂ (–13.3 ppm).

Open image in new window

Graphical Abstract The three lowest Si2CH2 and Ge2CH2 isomers.

     

A <Emphasis Type="Italic">bean common mosaic virus</Emphasis> (BCMV)-resistance gene is fine-mapped to the same region as <Emphasis Type="Italic">Rsv1</Emphasis>-<Emphasis Type="Italic">h</Emphasis> in the soybean cultivar Suweon 97

Key message

In the soybean cultivar Suweon 97, BCMV-resistance gene was fine-mapped to a 58.1-kb region co-localizing with the Soybean mosaic virus (SMV)-resistance gene, Rsv1-h raising a possibility that the same gene is utilized against both viral pathogens.

Abstract

Certain soybean cultivars exhibit resistance against soybean mosaic virus (SMV) or bean common mosaic virus (BCMV). Although several SMV-resistance loci have been reported, the understanding of the mechanism underlying BCMV resistance in soybean is limited. Here, by crossing a resistant cultivar Suweon 97 with a susceptible cultivar Williams 82 and inoculating 220 F₂ individuals with a BCMV strain (HZZB011), we observed a 3:1 (resistant/susceptible) segregation ratio, suggesting that Suweon 97 possesses a single dominant resistance gene against BCMV. By performing bulked segregant analysis with 186 polymorphic simple sequence repeat (SSR) markers across the genome, the resistance gene was determined to be linked with marker BARSOYSSR_13_1109. Examining the genotypes of nearby SSR markers on all 220 F₂ individuals then narrowed down the gene between markers BARSOYSSR_13_1109 and BARSOYSSR_13_1122. Furthermore, 14 previously established F_2:3 lines showing crossovers between the two markers were assayed for their phenotypes upon BCMV inoculation. By developing six more SNP (single nucleotide polymorphism) markers, the resistance gene was finally delimited to a 58.1-kb interval flanked by BARSOYSSR_13_1114 and SNP-49. Five genes were annotated in this interval of the Williams 82 genome, including a characteristic coiled-coil nucleotide-binding site-leucine-rich repeat (CC-NBS-LRR, CNL)-type of resistance gene, Glyma13g184800. Coincidentally, the SMV-resistance allele Rsv1-h was previously mapped to almost the same region, thereby suggesting that soybean Suweon 97 likely relies on the same CNL-type R gene to resist both viral pathogens.

     

Catalytic properties of aminoacylase of strain <Emphasis Type="Italic">Rhodococcus armeniensis</Emphasis> AM6.1

Studies of substrate specificity revealed that the D-aminoacylase of Rhodococcus armeniensis AM6.1 strain exhibits absolute stereospecificity to the D-stereoisomers of N-acetyl-amino acids. The enzyme is the most active reacted with N-acetyl-D-methionine, as well as with aromatic and hydrophobic N-acetylamino acids and interacts weakly with the basic substrates. It is practically not reacted with acidic and hydrophilic N-acetyl-amino acids. Michaelis constants (K_m) and maximum reaction velocities (V_max) were calculated, using linear regression analysis, for the following substrates: N-acetyl-D-methionine, N-acetyl-D-alanine, N-acetyl-D-phenylalanine, N-acetyl-D-tyrosine, N-acetyl-D-valine, N-acetyl-D-oxyvaline, N-acetyl- D-leucine. Substrate inhibition of D-aminoacylase was displayed with N-acetyl-D-leucine (K_s = 35.5 ± 28.3 mM) and N-acetyl-DL-tyrosine (K_s = 15.8 ± 4.5 mM). Competitive inhibition of the enzyme with product–acetic acid (K_i = 104.7 ± 21.7 mM, K_m = 2.5 ± 0.5 mM, V_max = 25.1 ± 1.5 U/mg) was observed.     

Charge ordering in the metal–insulator transition of V-doped CrO<Subscript>2</Subscript> in the rutile structure

Electronic, magnetic, and structural properties of pure and V-doped CrO₂ were extensively investigated utilizing density functional theory. Usually, pure CrO₂ is a half-metallic ferromagnet with conductive spin majority species and insulating spin minority species. This system remains in its half-metallic ferromagnetic phase even at 50% V-substitution for Cr within the crystal. The V-substituted compound Cr_0.5V_0.5O₂ encounters metal–insulator transition upon the application of on-site Coulomb repulsion U?=?7 eV preserving its ferromagnetism in the insulating phase. It is revealed in this study that Cr³⁺-V⁵⁺ charge ordering accompanied by the transfer of the single V-3d electron to the Cr-3dt_2g orbitals triggers metal–insulator transition in Cr_0.5V_0.5O₂. The ferromagnetism of Cr_0.5V_0.5O₂ in the insulating phase arises predominantly due to strong Hund’s coupling between the occupied electrons in the Cr-t_2g states. Besides this, the ferromagnetic Curie temperature (T_c) decreases significantly due to V-substitution. Interestingly, a structural distortion is observed due to tilting of CrO₆ or VO₆ octahedra across the metal–insulator transition of Cr_0.5V_0.5O₂.

Open image in new window

Graphical abstract The V-doped compound Cr_0.5V_0.5O₂ is found a half-metallic ferromagnet (HMF) in the absence of on-site Coulomb interaction (U). This HMF behavor maintains up to U?=?6 eV. Eventually, this system encounters metal-insulator transition (MIT) upon the application of U?=?7 eV with a band gap of E_g ~ 0.31 eV. Nevertheless, applications of higher U widen the band gaps. In this figure, calculated total (black), Cr-3d (red), V-3d (violet), and O-2p (blue) DOS of Cr_0.5V_0.5O₂ for U?=?8 eV are illustrated. The system is insulating with a band gap of E_g ~ 0.7 eV.

     

Cloning and expression of <Emphasis Type="Italic">β</Emphasis>-glucosidase gene from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> into <Emphasis Type="Italic">E. coli</Emphasis> BL 21 (DE3)

A 1.4 Kb fragment of Bacillus licheniformis ATCC 14580 encoding β-glucosidase was cloned and expressed in Escherichia coli. β-Glucosidase expressed by E. coli harboring cloned gene was located entirely in the intracellular fraction. Recombinant β-glucosidase protein was purified to homogeneity level and the molecular weight was found to be 53 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis. It gave maximum activity at 50°C and pH 6. K _m and V _max were 0.206 mM and 1.26 U/mg, respectively, with p-nitrophenyl-β-D-glucopyranoside, while activation energy E_a, enthalpy of activation ?H and entropy of activation ΔS were found to be 66.31 kJ/mol, 64.04 kJ/mol and 48.28 J/mol/K, respectively. The pK_a1 and pK_a2 of the ionizable groups of active site residues involved in V_max were found to be 5.5 and 7.0, respectively. When the recombinant β-glucosidase protein was used as a member of consortium with endoglucanase and exoglucanase for the saccharification of wheat straw, 123% increase in saccharification was observed.     

Antigenic polysaccharides of bacteria: 41. Structures of the O-specific polysaccharides of <Emphasis Type="Italic">Shigella dysenteriae</Emphasis> types 4 and 5 revised by NMR spectroscopy

The earlier established structures of the acidic O-specific polysaccharides from two typical strains of the Shigella dysenteriae bacterium were revised using modern NMR spectroscopy techniques. In particular, the configurations of the glycosidic linkages of GlcNAc (S. dysenteriae type 4) and mannose (S. dysenteriae type 5) residues were corrected. In addition, the location of the sites of non-stoichiometric O-acetylation in S. dysenteriae type 4 was determined: the lateral fucose residue was shown to be occasionally O-acetylated; also, theposition of the O-acetyl group present at the stoichiometric quantity in S. dysenteriae type 5 was corrected. The revised structures of the polysaccharides studied are shown below. The known identity of the O-specific polysaccharide structures of S. dysenteriae type 5 and Escherichia coli O58 was confirmed by ¹³C NMR spectroscopy and, hence, the structure of the E. coli O58 polysaccharide should be revised in the same manner.

Open image in new window

where L-Rhap3Rlac2Ac is 2-O-acetyl-3-O-[(R-1-carboxyethyl]-L-rhamnose