A morphometric study of variance in articulated dendritic phytolith wave lobes within selected species of Triticeae and Aveneae

Morphometric analysis has proven to be an effective tool for distinguishing among phytolith assemblages produced by closely related plant taxa. Elongate dendritic epidermal phytoliths are produced in the inflorescence bracts of many cereal species. Under light microscopy, these articulated dendritic phytoliths produce wave patterns between the margins of the cells that are reported to have taxonomic significance. In this study we explore morphometric variance among the lobes of the wave patterns formed by the articulated dendritic phytoliths within selected species of cereals as a first step towards understanding the variance between species. We found that there is often significant variance in dendritic wave lobes among different accessions of a species, among the different types of inflorescence bracts of the species (glumes, lemmas and paleae), and among each bract type’s location on the inflorescence (upper, middle and lower third of inflorescence spike or panicle). We observed that shape morphometries are typically more reliable and require a smaller sample size for statistical confidence than size morphometries. We further observed that adequate samples sizes for analysis of several shape morphometries of articulated dendritic wave lobes are considerably smaller than those reported to be required for analysis of the same morphometries of individual or isolated dendritic phytoliths. To gain a preliminary sense whether there is potential for discriminating between taxa in light of the significant variance within species, we compared our data to archaeological material from the historical center of Brussels. We demonstrate that while there is considerable variance in the morphometries among accessions, bract types and inflorescence locations within each species, there may yet be potential for discriminating between cereal species in archaeological samples by the morphometries of their dendritic phytolith wave lobes. We present one possible paradigm for conducting such analysis on archaeological material.     

Enamel structure and microwear: an experimental study of the response of enamel to shearing force.

The anisotropic fracturing and differential wear properties of enamel microstructure represent factors that can obscure the predictive relationship between dental microwear and diet. To assess the impact of enamel structure on microwear, this in vitro experimental study examines the relative contributions to wear of three factors: 1) species differences in microstructure, 2) direction of shearing force relative to enamel prisms and crystallites, and 3) size of abrasive particles. Teeth of Lemur, Ovis, Homo, and Crocodylus, representing, respectively, the structural categories of prismatic patterns 1, 2, and 3 and nonprismatic enamel, were abraded by shearing forces (forces having a component directed parallel to abraded surfaces) and examined by scanning electron microscopy. Striation width increased with particle size for nonprismatic, but not for prismatic, specimens. Direction of shear relative to prism and crystallite orientation had a significant influence on striation width in only some prismatic enamels. The different responses of prismatic and nonprismatic enamels to abrasion reflect the influence of structure, but at the level of organization of crystallites rather than prisms per se. Such interactions explain in part the inability of striation width to discriminate among animals with different dietary habits. Heteroscedasticity and deviations from normality also may confound parametric analyses of microwear variables. Variation in crystallite orientation in prismatic enamels may contribute to optimal dental function through the property of differential wear in functionally distinct regions of teeth.     

A study of microwear on chimpanzee molars: Implications for dental microwear analysis

Recent investigations of dental microwear have shown that such analyses may ultimately provide valuable information about the diets of fossil species. However, no background information about intraspecific variability of microwear patterns has been available until now. This study presents the results of an SEM survey of microwear patterns found on occlusal enamel of chimpanzee molars. Methods of pattern analysis are described. Selected sites on the occlusal surface included shearing, grinding, and puncture-crushing surfaces formed by both phases of the power stroke of mastication. The microwear patterns found in this sample of chimpanzees showed a high degree of regularity. However, certain parameters such as relative pit-to-striation frequencies, feature density, striation length, and pit diameter were significantly affected by facet type and molar position. Sex and age of individuals also influenced some microwear parameters, but due to the small sample size these findings are considered to be preliminary. These results show that microwear within a single species may vary because of factors that are due more to biomechanics than to diet. The study also supplies some metrical estimates of “normal” pattern variability due to functional and morphological influences. These estimates should provide a useful baseline for assessing the significance of microwear pattern differences that may be found between species of differing diets.     

On the relationship of dental microwear to dental macrowear

Dental microwear analysts have demonstrated that hard diets leave numerous microscopic pits on occlusal surfaces. The relationship between occlusal pitting and gross macrowear, however, is not well known. The current study seeks to elucidate the relationship between dental microwear and macrowear by determining if microscopically pitted teeth are associated with greater expressions of macrowear. This study examined microwear and macrowear on mandibular second molars from 60 prehistoric adult Native Americans representing three dietary regimes (foraging, mixed economy, and agriculture). Initially, two dental microwear feature variables were studied: percentage of pits and mean scratch width. Standard macrowear scores ranged from 4 to 40. ANOVAs suggested that neither of the microwear variables was affected by age or sex, but age affected macrowear scores. Because of this, the sample had a balanced number of young and old adults (i.e., those below and above skeletal age 35). A Pearson's correlation showed no covariation between scratch width and the percentage of pits. Regression analysis indicated that macrowear was not a function of the percentage of pits. However, a significant positive relationship was found between dental macrowear and scratch width. A post priori test found a significant negative relationship between macrowear and the total number of scratches. It is concluded, then, that wide scratches remove more enamel and dentin than do numerous pits, although both cause dental wear. It is suggested here that the term “abrasive” be used to describe those microwear profiles that lead to heavy macrowear and have relatively wide scratches. Am J Phys Anthropol, 2010. © 2009 Wiley‐Liss, Inc.     

Molar Microwear of Narrow-Headed Vole (<Emphasis Type="Italic">Microtus gregalis</Emphasis> Pall., 1779) Depending on the Feed Abrasiveness

In the narrow-headed vole, enamel microwear of the first mandibular molar (of the protoconid and entoconid anterior enamel wall) was studied under the laboratory conditions and at the fixed feed composition. The classic parameters and the area of the enamel prism lesion were taken into account. The enamel lesion patterns caused by the tooth–tooth and tooth–food interactions have been determined. Differences were found between the voles kept on feed with different abrasive properties, as well as between the lingual and buccal conids of the first mandibular molar. In the Microtus species, the ratio of micro-lesions (pits and scratches) did not depend on the abrasive properties of the feed consumed. The extent of preservation of the enamel contour anterior edge depended on the feed composition and could be used as an indicator for indirect evaluation of the Microtus species diet.     

Inter- and intraspecific variation in grass phytolith shape and size: a geometric morphometrics perspective

Background and AimsThe relative contributions of inter- and intraspecific variation to phytolith shape and size have only been investigated in a limited number of studies. However, a detailed understanding of phytolith variation patterns among populations or even within a single plant specimen is of key importance for the correct taxonomic identification of grass taxa in fossil samples and for the reconstruction of vegetation and environmental conditions in the past. In this study, we used geometric morphometric analysis for the quantification of different sources of phytolith shape and size variation.MethodsWe used landmark-based geometric morphometric methods for the analysis of phytolith shapes in two extant grass species (Brachypodium pinnatum and B. sylvaticum). For each species, 1200 phytoliths were analysed from 12 leaves originating from six plants growing in three populations. Phytolith shape and size data were subjected to multivariate Procrustes analysis of variance (ANOVA), multivariate regression, principal component analysis and linear discriminant analysis.Key ResultsInterspecific variation largely outweighed intraspecific variation with respect to phytolith shape. Individual phytolith shapes were classified with 83 % accuracy into their respective species. Conversely, variation in phytolith shapes within species but among populations, possibly related to environmental heterogeneity, was comparatively low.ConclusionsOur results imply that phytolith shape relatively closely corresponds to the taxonomic identity of closely related grass species. Moreover, our methodological approach, applied here in phytolith analysis for the first time, enabled the quantification and separation of variation that is not related to species discrimination. Our findings strengthen the role of grass phytoliths in the reconstruction of past vegetation dynamics.     

New methods of tooth microwear analysis and application to dietary determination of two extinct antelopes

A separation exists between the tooth microwear of extant ruminant browsers and grazers when examined with new statistical techniques such as the dichotomous, polychotomous and continuous methods. Extant mixed feeders, however, could not be discerned as a distinct group. Many variables were used in the analysis, including two new variables; the area and perimeter of scars.A standard definition of a pit is deduced and a recommendation is made for a method and a model which best charactrizes the enamel scars for determination of browsing and grazing dietary categories. The best diagnostic method of tooth microwear analysis utilizes the number of pits smaller than or equal to the ratio four (lenth over width), the number of scratches between four and 100 micrometres in length to width ratio, and the number of gouges greater than 100 micrometres in length to width ratio. Browsers have many pits and few scratches, with the exception of the giraffe. Grazers have many scratches and few pits, with the exception of the common waterbuck.
The tooth microwear analysis suggests that Tragoportax amalthea (Boselaphini, Bovidae) was a mixed feeder at Pikermi and a grazer at Samos. Using the dietary adaptations and the time differences (Pikermi is slightly older than Samos), it is assumed that we ahve recorded evolutionary change from a mixed feeder to a grazer. Tragoportax rugosifrons from Samos was a grazer. Pikermi and Samos are Miocene (Turolian) localities in Greece.     

扫描电镜分析牙齿釉质结构方法的讨论

通过扫描电镜对大熊猫牙齿釉质结构的三维观察与比较,结果表明:在同一枚牙齿上,不同部位的釉质切面,釉柱截面的形状、大小以及排列等,有不同的现象.因此在用上述特征描述时,应对所有要比较的样品,须精确地统一在相同的部位.本文以多次实验结果,表明了严格定位取样的重要性.     

Direct Comparisons of 2D and 3D Dental Microwear Proxies in Extant Herbivorous and Carnivorous Mammals

The analysis of dental microwear is commonly used by paleontologists and anthropologists to clarify the diets of extinct species, including herbivorous and carnivorous mammals. Currently, there are numerous methods employed to quantify dental microwear, varying in the types of microscopes used, magnifications, and the characterization of wear in both two dimensions and three dimensions. Results from dental microwear studies utilizing different methods are not directly comparable and human quantification of wear features (e.g., pits and scratches) introduces interobserver error, with higher error being produced by less experienced individuals. Dental microwear texture analysis (DMTA), which analyzes microwear features in three dimensions, alleviates some of the problems surrounding two-dimensional microwear methods by reducing observer bias. Here, we assess the accuracy and comparability within and between 2D and 3D dental microwear analyses in herbivorous and carnivorous mammals at the same magnification. Specifically, we compare observer-generated 2D microwear data from photosimulations of the identical scanned areas of DMTA in extant African bovids and carnivorans using a scanning white light confocal microscope at 100x magnification. Using this magnification, dental microwear features quantified in 2D were able to separate grazing and frugivorous bovids using scratch frequency; however, DMTA variables were better able to discriminate between disparate dietary niches in both carnivorous and herbivorous mammals. Further, results demonstrate significant interobserver differences in 2D microwear data, with the microwear index remaining the least variable between experienced observers, consistent with prior research. Overall, our results highlight the importance of reducing observer error and analyzing dental microwear in three dimensions in order to consistently interpret diets accurately.     

Human dental microwear from Ohalo II (22,500-23,500 cal BP), southern Levant

Dietary hardness and abrasiveness are inferred from human dental microwear at Ohalo II, a late Upper Palaeolithic site (22,500-23,500 cal BP) in the southern Levant. Casts of molar grinding facets from two human skeletons were examined with a scanning electron microscope. The size and frequency of microwear was measured, counted, and compared to four prehistoric human groups from successive chronological periods in the same region: pre-pottery Neolithic A, Chalcolithic (this study); Natufian, pre-pottery Neolithic B (Mahoney: Am J Phys Anthropol 130 (2006) 308-319). The Ohalo molars had a high frequency of long narrow scratches, and a few small pits, suggesting a tough abrasive diet that required more shearing rather than compressive force while chewing. These results imply that the diet of the two late Upper Palaeolithic hunter-gatherers did not focus on very hard foods. Aquatic foods with adherent contaminants, as well as grit from plant grinding tools seemed likely causal agents. The size of the pits and scratches on the Ohalo molars were most similar to microwear from the pre-pottery Neolithic A period, though they also compared well to the Chalcolithic period. These results contrasted with the larger pits and scratches from the Natufian hunter-gatherers and pre-pottery Neolithic B farmers, implying that there is no simple increase or decrease in dietary hardness and abrasiveness across the late Upper Palaeolithic to Chalcolithic development in the Southern Levant.     

MicroWeaR: A new R package for dental microwear analysis

Mastication of dietary items with different mechanical properties leaves distinctive microscopic marks on the surface of tooth enamel. The inspection of such marks (dental microwear analysis) is informative about the dietary habitus in fossil as well as in modern species. Dental microwear analysis relies on the morphology, abundance, direction, and distribution of these microscopic marks. We present a new freely available software implementation, MicroWeaR, that, compared to traditional dental microwear tools, allows more rapid, observer error free, and inexpensive quantification and classification of all the microscopic marks (also including for the first time different subtypes of scars). Classification parameters and graphical rendering of the output are fully settable by the user. MicroWeaR includes functions to (a) sample the marks, (b) classify features into categories as pits or scratches and then into their respective subcategories (large pits, coarse scratches, etc.), (c) generate an output table with summary information, and (d) obtain a visual surface‐map where marks are highlighted. We provide a tutorial to reproduce the steps required to perform microwear analysis and to test tool functionalities. Then, we present two case studies to illustrate how MicroWeaR works. The first regards a Miocene great ape obtained from through environmental scanning electron microscope, and other a Pleistocene cervid acquired by a stereomicroscope.     

Dental microwear in anubis and hybrid baboons (Papio hamadryas, sensu lato) living in Awash National Park, Ethiopia

We describe dental microwear in baboons (Papio hamadryas sensu lato) from the anubis-hamadryas hybrid zone of Awash National Park, Ethiopia, outline its variation with sex and age, and attempt to relate the observed microwear pattern to environment and diet. Casts of the maxillary second molar of 52 adult and subadult individuals of both sexes were examined with a scanning electron microscope at x 500. Digitized micrographs were taken at a consistent location on facet 9, and microwear was recorded with an image analysis software package. Univariate and multivariate statistics were used to investigate the shape, size, and density of microwear features. The overall pattern of microwear exhibits an unusual combination of high feature density, with numerous small pits and relatively wide striations, and a high correlation between width of pits and striations across individuals. We interpret this pattern as predominantly the consequence of abrasion by relatively small-caliber environmental grit when accidentally ingested with tough foods such as dried seeds and fruits, as expected in a terrestrial omnivore living in a dusty habitat. Statistical analysis revealed no significant differences between groups defined by sex, age, or troop membership, a result consistent with qualitative observations of feeding habits in this population, and which lends no support to the hypothesis that the longer jaws of adult males should result in longer striations. A trend towards greater feature density in females, however, might be due to limited sexual dinichism, and merits further investigation.     

Morphometric analysis of inflorescence phytoliths produced byAvena sativa L. andAvena strigos schreb

Morphometric analysis, the study of measurements of size and shape, has the potential to be an effective tool for phytolith analysis. This study reports the first attempt to apply the methodology to oats. In particular, this study was designed to determine if morphometric analysis could adequately discriminate between phytoliths produced in the inflorescence bracts of two species of oats, Avena sativa L. and Avena strigosa Schreb. Results indicate that while the taxa produce the same types of phytoliths, those phytoliths have significantly different measurements of size and shape. This suggests the technique has the potential to become a powerful research tool for investigators working in the wide variety of disciplines that utilize phytolith analysis.     

Quantitative differences in dental microwear between primate species with different diets and a comment on the presumed diet of Sivapithecus

Studies of dental microwear have been used to relate tooth form to function in a variety of recent and extinct mammals. Probably the most important aspect of microwear analysis is the possibility of using it to deduce the diet of extinct animals. Such deductions must be based on comparative studies of modern species with known diets, but to date, only qualitative studies have been attempted and all have been based on small samples. Here we report quantitative differences in dental microwear between primate species that are known to have different diets. Occlusal facets with different functions have previously been shown to exhibit different microwear patterns. However, the differences between facets of one species are shown to be far less than those between homologous facets of different species. Study of seven species of extant primates shows that enamel microwear can be used to distinguish between those with a mainly frugivorous diet and those with a mainly folivorous one. Microwear can also distinguish hard-object feeders from soft-fruit eaters. The microwear of Miocene Sivapithecus indicus cannot be distinguished statistically from that of the chimpanzee, but it is different from that of the other species. On this evidence S. indicus was not a hard-object feeder and the adaptive significance of its thick molar enamel is at present unknown.     

Anterior dental microwear and its relationship to diet and feeding behavior in three african primates (Pan troglodytes troglodytes,Gorilla gorilla gorilla andPapio hamadryas)

Anterior dental microwear is shown to be related to diet and to feeding habits in three groups of extant African primates includingPan troglodytes troglodytes, Gorilla gorilla gorilla andPapio hamadryas. Five distinct types of incisal microwear are found in these groups. These include: fine wear striae, polish, small pits, large pits and microflakes. It is demonstrated that each species exhibits a different set of microwear types. Chimpanzees exhibit extensive pitting, mesiodistally oriented fine wear striae and small areas of polish, features of microwear that are probably related to the husking of hard fruit skins and the occasional stripping of leaves. Gorillas show large areas of polish, small pits and labiolingually oriented wear striae, a combination of features that may be associated with the stripping of leaves and pith. Baboons show extensive edge damage involving clusters of large pits and microflakes; this set of microwear types may be related to the initial chewing of gravel-laden seeds, roots and rhizomes. Microwear found on the canine/premolar complex of all three groups corresponds to the puncture-crushing and to the slicing of food.     

Fusarium species and fusarium mycotoxins in cereals from West Romania: preliminary survey

Fungal contamination of plant products is an important risk factor for health, because of the high mycotoxin potential deriving from these contaminations with multiple effects: hepatic toxicity, teratogenic, mutagenic and carcinogenic. The contamination of cereals with mycotoxins has been a serious problem in Balkan communities. Several studies implicated mycotoxins, in endemic kidney disease geographically limited to Balkan region (Balkan endemic nephropathy). The trichothecenes are of particular concern because they are ubiquitous found in wheat, corn and barley throughout the world. Fumonisins have been isolated from certain Fusarium species of which FB1, FB2 and FB3 are the major ones produced in naturally contaminated foods.These mycotoxins are produced on cereal grains infected by Fusarium while being grown in-the-field. The aim of this study is to evaluate the presence of the Fusarium species in cereals from West side of Romania and to determinate the concentrations of deoxynivalenol (DON) and fumonisine (F1+F2). Identification of Fusarium species was done using the total number of fungal species determination method. The level of mycotoxins was determined with the immune-enzymatic method ELISA. 27 cereal samples from rural households in three counties in West Romania were analysed.     

Brief communication: Short- and long-term in vivo human buccal-dental microwear turnover

Buccal-dental microwear depends on the abrasive content of chewed foodstuffs and can reveal long-term dietary trends in human populations. However, in vivo experimental analyses of buccal microwear formation processes are scarce. Here, we report the effects of an abrasive diet on microwear rates in two adult volunteers at intervals of 8 days over a period of 1 month and document long-term turnover over 5 consecutive years in the same subjects under an ad libitum Mediterranean diet. Buccal microwear was analyzed on mandibular first molars using high-resolution replicas and scanning electron microscopy. Microwear turnover was assessed by recording the scratches lost and gained at each time point. Our results indicate that scratch formation on enamel surfaces increased with a highly abrasive diet compared to both pre-test and post-test ad libitum dietary controls. In the long-term analysis, scratch turnover was higher than expected, but no significant long-term trends in microwear density or length were observed, because microwear formation was compensated by scratch disappearance. Our results confirm that buccal microwear patterns on mandibular molars show a dynamic formation process directly related to the chewing of abrasive particles along with ingested food. In addition, the observed long-term stability of buccal microwear patterns makes them a reliable indicator of overall dietary habits.     

Specific 5S ribosomal RNA primers for plant species i dentification in admixtures 3

The DNA sequences of the spacers between the 5S ribosomal RNA genes were determined for the cereals maize, barley, soghum, rye, rice, oat, and wheat. Species-specific primers were designed from the spacer region. PCR with these primers and a common primer from the conserved 5S ribosomal RNA gene sequence was investigated as a method for detection of the seven cereal species. DNA from these species could be specifically detected in mixtures. This technique could find application in the determination of the composition of admixtures or processed cereal products. The protocol described has potential for general application in the identification of plant species.     

In vivo and in vitro turnover in dental microwear

Given the potential usefulness of dental microwear analyses in interpretations of archaeological and paleontological material, it is surprising how little we know about changes in individual microwear features through time. The purpose of this study was to document the turnover in primate dental microwear through in vivo dental studies of monkeys raised on different diets, and through in vitro studies of the abrasive effects of monkey chow biscuits on isolated monkey teeth. As in previous studies, epoxy replicas were prepared from dental impressions and examined under a scanning electron microscope. Results indicate that, under certain conditions, the turnover in primate dental microwear can be on the order of days, hours, or even minutes. Individual microscopic wear features can be obliterated within 24 hours on the molars of laboratory monkeys, and monkey chow biscuits can easily scratch the enamel of isolated monkey teeth. Monkeys raised on a hard diet showed more rapid turnover in dental microwear than monkeys raised on a soft diet. However, paired-sample tests revealed that, for all animals, the molar shearing facets were being abraded at a significantly slower rate than molar crushing/grinding facets. In light of these results, investigators should make every effort to use large samples in interspecific comparisons of dental microwear involving species with variable diets. Another implication of these results is that changes in dental microwear might be useful indicators of changes in oral behavior over relatively short periods of time.     

Dental microwear and diets of African early Homo

Conventional wisdom ties the origin and early evolution of the genus Homo to environmental changes that occurred near the end of the Pliocene. The basic idea is that changing habitats led to new diets emphasizing savanna resources, such as herd mammals or underground storage organs. Fossil teeth provide the most direct evidence available for evaluating this theory. In this paper, we present a comprehensive study of dental microwear in Plio-Pleistocene Homo from Africa. We examined all available cheek teeth from Ethiopia, Kenya, Tanzania, Malawi, and South Africa and found 18 that preserved antemortem microwear. Microwear features were measured and compared for these specimens and a baseline series of five extant primate species (Cebus apella, Gorilla gorilla, Lophocebus albigena, Pan troglodytes, and Papio ursinus) and two protohistoric human foraging groups (Aleut and Arikara) with documented differences in diet and subsistence strategies. Results confirmed that dental microwear reflects diet, such that hard-object specialists tend to have more large microwear pits, whereas tough food eaters usually have more striations and smaller microwear features. Early Homo specimens clustered with baseline groups that do not prefer fracture resistant foods. Still, Homo erectus and individuals from Swartkrans Member 1 had more small pits than Homo habilis and specimens from Sterkfontein Member 5C. These results suggest that none of the early Homo groups specialized on very hard or tough foods, but that H. erectus and Swartkrans Member 1 individuals ate, at least occasionally, more brittle or tough items than other fossil hominins studied.