Glutaraldehyde and glyoxal cross-linked chitosan microspheres for controlled delivery of centchroman

Glutaraldehyde and glyoxal cross-linked microspheres were prepared using chitosan with different molecular weights (MWs) and degrees of deacetylation (DDAs) for sustained release of centchroman under physiological conditions. The DDA in chitosan was determined by different methods, and the samples were categorized as chitosan with low (48%), medium (62%), and high (75%) DDA. The size and shape of the microspheres were determined by scanning electron microscopy (SEM), and hydrophobicity was determined by adsorption of Rose Bengal dye on microspheres cross-linked with glutaraldehyde or glyoxal. The effect of MW, DDA, and degree of cross-linking in microspheres was studied on the degree of swelling, as well as by the loading and release of centchroman. The glyoxal cross-linked microspheres were more compact and hydrophobic and showed better sustained release in companion to chitosan microspheres and glutaraldehyde cross-linked microspheres. The linear fractional release of centchroman with the square root of time indicated a Fickian behavior of centchroman, and the microspheres also showed zero-order release kinetics for centchroman.     

Growth of human mesenchymal stem cells (MSCs) on films of enzymatically modified chitosan

Mesenchymal stem cells (MSCs) are known to be an attractive cell source for tissue engineering and regenerative medicine. One of the main limiting steps for clinical use or biotechnological purposes is the expansion step. The research of compatible biomaterials for MSCs expansion is recently regarded as an attractive topic. The aim of this study was to create new functional biomaterial for MSCs expansion by evaluating the impact of chitosan derivative films modified by enzymatic approach. First, chitosan particles were enzymatically modified with ferulic acid (FA) or ethyl ferulate (EF) under an eco‐friendly procedure. Then, films of chitosan and its modified derivatives were prepared and evaluated by physicochemical and biological properties. Results showed that the enzymatic grafting of FA or EF onto chitosan significantly increased hydrophobic and antioxidant properties of chitosan films. The MSCs cell viability on chitosan derivative films also increased depending on the film thickness and the quantity of grafted phenols. Furthermore, the cytotoxicity test showed the absence of toxic effect of chitosan derivative films towards MSCs cells. Cell morphology showed a well attached and spread phenotype of MSCs cells on chitosan derivative films. On the other hand, due to the higher phenol content of FA‐chitosan films, their hydrophobic, antioxidant properties and cell adhesion were improved in comparison with those of EF‐chitosan films. Finally, this enzymatic process can be considered as a promising process to favor MSCs cell growth as well as to create useful biomaterials for biomedical applications especially for tissue engineering. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:491–500, 2016     

自组装IKVAV多肽纳米纤维支架凝胶及其对嗅鞘细胞的作用

旨在观察自组装IKVAV多肽纳米纤维支架凝胶对鼠嗅鞘细胞(OECs)的作用。通过调整IKVAV溶液pH值并加入培养液触发多肽自组装为支架凝胶, 用原子力显微镜检测IKVAV分子可以自组装成编织状纳米纤维(直径为3~5 nm)。采用原代分离培养方法获得OECs单细胞悬液后, 使用差速贴壁法两次纯化OECs且在第12天通过免疫染色计数OECs纯度为85%。将IKVAV多肽纳米纤维支架凝胶与OECs复合培养, 倒置显微镜下观察OECs生长良好, Calcein-AM/PI活、死细胞染色表明活细胞数达95%。CCK-8法间接细胞计数证实IKVAV多肽可促进OECs的黏附, 对OECs增殖没有影响。由此可见IKVAV多肽可以自组装成纳米纤维支架凝胶且对OECs有良好的生物相容性及黏附作用, 可作为神经组织工程支架材料。     

Clonal In Vitro Analysis of Neurotrophin Receptor p75-Immunofluorescent Cells Reveals Phenotypic Plasticity of Primary Rat Olfactory Ensheathing Cells

Clonal in vitro analysis represents a powerful tool for studying cellular differentiation. In the present study, microscope-assisted single cell transfer was combined with immunofluorescence to establish clonal cultures of identified primary rat olfactory ensheathing cells (OECs). During development, OECs originate from the neural crest, a transient population of multipotent cells. Since only neural crest cells have been analyzed at clonal density, it remained unclear whether OECs may retain multipotent features. Neurotrophin receptor p75 (p75^NTR)-immunolabelled rat OECs were seeded at clonal density under visual control using a semiautomated cell selection and transfer device (Quixell?) and emerging clones were analyzed with regard to proliferation and antigenic expression. We demonstrate that OECs from neonatal (P1) and 7 day-old (P7) but not from adult rats formed clones in the presence of OEC- and astrocyte-conditioned media (OEC-CM, A-CM). Cloning efficiency but not in vitro growth of OECs was independent of age but increased upon treatment with OEC-CM. Interestingly, about 75 % of P1 compared to 27 % of P7 OEC clones lost p75^NTR expression during 2 weeks in vitro and acquired immunoreactivity for Thy-1. The observation that primary OECs from P1 lost expression of p75^NTR at clonal density and initiated expression of the fibroblast marker Thy-1 may suggest that their developmental potential is greater than previously anticipated. Since microscope-assisted selection of immunofluorescent cells combined with semiautomated transfer guarantees monoclonality in a single step and affords selection of cells according to fluorescent label and/or morphological criteria it may be relevant for a variety of other cell types.     

Adhesion and growth of HUVEC endothelial cells on films of enzymatically functionalized chitosan with phenolic compounds

Human Umbilical Vein Endothelial Cell (HUVEC) growth on chitosan films and its enzymatically functionalized derivatives films with ferulic acid (FA) and ethyl ferulate (EF) was assessed by evaluating cell adhesion, morphology and cell viability. The results indicated that chitosan derivative films improved protein adsorption properties compared to chitosan films. The HUVEC cell morphology showed well attachment and spread phenotype on chitosan derivative films compared to those growing on chitosan films which did not spread and remained round. Evaluation of cell viability revealed improvement of cell adhesion on chitosan derivative films compared to chitosan film depending on the quantity of oxidized phenols grafted on chitosan. In addition, FA-/EF-chitosan films allowed almost similar cell adhesion. Furthermore, cell adhesion was increased with the film thickness. These results suggested that the oxidized phenols grafting on chitosan is a promising process to enhance cell adhesion, growth and creating useful functional biomaterials.     

Purification and characterization of chitosanase from Bacillus sp. strain KCTC 0377BP and its application for the production of chitosan oligosaccharides

For the enzymatic production of chitosan oligosaccharides from chitosan, a chitosanase-producing bacterium, Bacillus sp. strain KCTC 0377BP, was isolated from soil. The bacterium constitutively produced chitosanase in a culture medium without chitosan as an inducer. The production of chitosanase was increased from 1.2 U/ml in a minimal chitosan medium to 100 U/ml by optimizing the culture conditions. The chitosanase was purified from a culture supernatant by using CM-Toyopearl column chromatography and a Superose 12HR column for fast-performance liquid chromatography and was characterized according to its enzyme properties. The molecular mass of the enzyme was estimated to be 45 kDa by means of sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The enzyme demonstrated bifunctional chitosanase-glucanase activities, although it showed very low glucanase activity, with less than 3% of the chitosanase activity. Activity of the enzyme increased with an increase of the degrees of deacetylation (DDA) of the chitosan substrate. However, the enzyme still retained 72% of its relative activity toward the 39% DDA of chitosan, compared with the activity of the 94% DDA of chitosan. The enzyme produced chitosan oligosaccharides from chitosan, ranging mainly from chitotriose to chitooctaose. By controlling the reaction time and by monitoring the reaction products with gel filtration high-performance liquid chromatography, chitosan oligosaccharides with a desired oligosaccharide content and composition were obtained. In addition, the enzyme was efficiently used for the production of low-molecular-weight chitosan and highly acetylated chitosan oligosaccharides. A gene (csn45) encoding chitosanase was cloned, sequenced, and compared with other functionally related genes. The deduced amino acid sequence of csn45 was dissimilar to those of the classical chitosanase belonging to glycoside hydrolase family 46 but was similar to glucanases classified with glycoside hydrolase family 8.     

Purification and Characterization of Two Types of Chitosanase from a Microbacterium sp.

Two extracellular chitosanases (ChiX and ChiN) were extracted from Microbacterium sp. OU01 with Mr values of 81 kDa (ChiX) and 30 kDa (ChiN). ChiN was optimally active at pH 6.2 and 50°C and ChiX at pH 6.6 and 60°C (assayed over 15 min). Both the activities increased with the degree of deacetylation (DDA) of chitosan. ChiN hydrolyzed oligomers of glucosamine (GlcN) larger than chitopentaose, and chitosan with 62–100% DDA; but ChiX acted on chitosan and released GlcN. Hydrolysis of chitosan with 99% DDA by ChiN released chitobiose, chitotriose and chitotetraose as the major products.     

Characteristics of deacetylation and depolymerization of β-chitin from jumbo squid (Dosidicus gigas) pens

This study evaluated the deacetylation characteristics of β-chitin from jumbo squid (Dosidicus gigas) pens by using strongly alkaline solutions of NaOH or KOH. Taguchi design was employed to investigate the effect of reagent concentration, temperature, time, and treatment step on molecular mass (MM) and degree of deacetylation (DDA) of the chitosan obtained. The optimal treatment conditions for achieving high MM and DDA of chitosan were identified as: 40% NaOH at 90 °C for 6 h with three separate steps (2 h + 2 h + 2 h) or 50% NaOH at 90 °C for 6 h with one step, or 50% KOH at 90 °C for 4 h with three steps (1 h + 1 h + 2 h) or 6 h with one step. The most important factor affecting DDA and MM was temperature and time, respectively. The chitosan obtained was then further depolymerized by cellulase or lysozyme with cellulase giving a higher degradation ratio, lower relative viscosity, and a larger amount of reducing-end formations than that of lysozyme due to its higher susceptibility. This study demonstrated that jumbo squid pens are a good source of materials to produce β-chitosan with high DDA and a wide range of MM for various potential applications.     

Cell Adhesion and Proliferation on Sulfonated and Non-Modified Chitosan Films

Three types of chitosan-based films have been prepared and evaluated: a non-modified chitosan film bearing cationizable aliphatic amines and two films made of N-sulfopropyl chitosan derivatives bearing both aliphatic amines and negative sulfonate groups at different ratios. Cell adhesion and proliferation on chitosan films of C2C12 pre-myoblastic cells and B16 cells as tumoral model have been tested. A differential cell behavior has been observed on chitosan films due to their different surface modification. B16 cells have shown lower vinculin expression when cultured on sulfonated chitosan films. This study shows how the interaction among cells and material surface can be modulated by physicochemical characteristics of the biomaterial surface, altering tumoral cell adhesion and proliferation processes.     

Biochemical characteristics of chitosanase from the Indonesian Bacillus licheniformis MB-2

Bacillus licheniformis MB-2, isolated from a hot spring water in Manado, Indonesia, secreted a unique chitosanase. Media consisted of 0.24% chitosan, 0.25% casiton, 1% MgSO₄, 1.4% K₂HPO₄, 0.02% CaCl₂·2H₂O, 0.002% FeSO₄·7H₂O (w/v) was used for enzyme production. Purification of the enzyme through the hydrophobic interaction chromatography system (butyl Sepharose 4 FF) resulted in two major active fractions; the F₂ fraction was shown as a single band at both sodium dodecyl sulfate-polyacrylamide gel electrophoresis and zymogram analysis with apparent molecular mass of 75 kDa. The enzyme worked best at 70°C and pH between 6.0 and 7.0. When incubated at 70, 80, and 90°C, the t_1/2 values were 26.56, 18.44, and 16.74 min, respectively with the k constant being at 0.026, 0.037, and 0.04/min. When heated at 90°C, the enzyme retained its activity up to 8 h in the presence of 1mM MnCl₂. The enzyme's activity was unaffected by the presence of 1 M NaCl and 6 M urea but was decreased by 2 M of guanidine hydrochloride. Albeit the enzyme did not degrade colloidal and glycol chitin, it hydrolyzed glycol chitosan up to 0.8% and colloidal chitosan up to 11%. The 85% deacetylated (DDA) soluble chitosan was the most susceptible to this enzyme, followed by 90% and 100% DDA chitosan. The K _{m app} values of the 85, 90, and 100% DDA soluble chitosans were found as 0.23, 0.24, and 0.58 mg/mL, whereas the V_max values were 843, 668, and 261 U/mg, respectively. The hydrolysis products of F₂ chitosanase at 24 h incubation (70°C) were pentasaccharide (GlcN)₅ and hexasaccharide (GlcN)₆. The prelimiaary test showed inhibitory effect of chitooligosaccharides resulted from enzymatic degradation toward Pseudomonas aeruginosa, Salmonella typhimurium. Listeria monocytogenes, Bacillus cereus, Escherichia coli, and Staphylococcus aureus.     

Effect of molecular weight of chitosan on antimicrobial properties and tissue compatibility of chitosan-impregnated bacterial cellulose films

Bacterial cellulose-chitosan (BC-C) films were developed by immersing purified BC pellicles in 1.5 ~ 2.0% (w/v) acetic acid solutions containing chitosan of varying molecular weights. Effects of different molecular weight of chitosan on physical, biological and antimicrobial properties of the composite films were investigated. The cumulative chitosan absorption capacities with M_w of 141,000, 199,000, and 263,000 were 38.43, 24.65, and 23.89 mg/cm³ of dry BC film, respectively. The cumulative release profiles of chitosan from the films strongly depended on molecular weight of chitosan and pH of solution. The order of release of chitosan from the BC-C films was dependent on molecular weight as follows: M_w 141,000 > M_w 199,000 > M_w 263,000. All BC-C films showed the antimicrobial abilities against Staphylococcus aureus and Aspergillus niger but had no inhibitory effect on the growth of Escherichia coli. The BC-C films supported for adhesion, spreading and proliferation of both human skin keratinocytes and fibroblasts. The antibacterial activity against S. aureus of the BC-C with the highest Mw chitosan (263,000) was higher than those of the others. On the other hand, the BC-C films with the lowest M_w chitosan (141,000) promoted the growth of human skin cells more than those of the others.     

Effect of chitosan type on protein and water recovery efficiency from surimi wash water treated with chitosan-alginate complexes

Previous research has shown that soluble protein recovery by chitosan (Chi) complexes with polyanions such as alginate (Alg) is more effective than using chitosan alone. In this study, Chi-Alg complexes were used to recover soluble proteins from surimi wash water (SWW) slightly acidified to pH 6. Six Chi samples differing in molecular weight (MW) and degree of deacetylation (DD) were used at 20, 40 and 100mg/L SWW Chi-Alg complexes prepared with a Chi:Alg mixing ratio previously optimized (MR=0.2). FTIR analysis of the solids recovered revealed the three characteristic amide bands observed in the same region for untreated SWW confirming protein adsorption by Chi-Alg. The superior effectiveness of Chi complexes was confirmed but differences among chitosan types could not be correlated to MW and DD. Experimental Chi samples with 94%, 93%, 75% and 93% DD and 22, 47, 225 and 3404 x 10(3)Da, respectively, showed 73-76% protein adsorption while a commercial chitosan sample with 84% DD and 3832 x 10(3)Da had 74-83% protein adsorption. An experimental chitosan, SY-1000 with 94% DD and 1.5 x 10(6)Da, showed the highest protein adsorption (79-86%) and turbidity reduction (85-92%) when used at 20mg/L SWW.     

Limitations of pH-potentiometric titration for the determination of the degree of deacetylation of chitosan

The degree of deacetylation (DDA) of chitosan determines the biopolymer's physico-chemical properties and technological applications. pH-Potentiometric titration seems to offer a simple and convenient means of determining DDA. However, to obtain accurate pH-potentiometric DDA values, several factors have to be taken into consideration. We found that the moisture content of the air-dry chitosan samples can be as high as 15%, and a reasonable fraction of this humidity cannot be removed by ordinary drying. Corrections have to be made for the ash content, as in some samples it can be as high as 1% by weight. The method of equivalence point determination was also found to cause systematic variations in the results and in some samples extra acid as high as 1 mol% of the free amino content was also identified. To compensate for the latter effect, the second equivalence point of the titration has to be determined separately and the analytical concentration of the acid be corrected for it. All the corrections listed here are necessary to obtain DDA values that are in reasonable agreement with those obtained from (1)H NMR and IR spectroscopic measurements. The need for these corrections severely limits the usefulness of pH-metry for determining accurate DDA values and thus potentiometry is hardly able to compete with other standard spectroscopic procedures, that is, (1)H NMR spectroscopy.     

Summer diatom blooms in the North Pacific subtropical gyre: 2008-2009

The summertime North Pacific subtropical gyre has widespread phytoplankton blooms between Hawaii and the subtropical front (～30°N) that appear as chlorophyll (chl) increases in satellite ocean color data. Nitrogen-fixing diatom symbioses (diatom-diazotroph associations: DDAs) often increase 10(2)-10(3) fold in these blooms and contribute to elevated export flux. In 2008 and 2009, two cruises targeted satellite chlorophyll blooms to examine DDA species abundance, chlorophyll concentration, biogenic silica concentration, and hydrography. Generalized observations that DDA blooms occur when the mixed layer depth is < 70 m are supported, but there is no consistent relationship between mixed layer depth, bloom intensity, or composition; regional blooms between 22-34°N occur within a broader temperature range (21-26°C) than previously reported. In both years, the Hemiaulus-Richelia and Rhizosolenia-Richelia DDAs increased 10(2)-10(3) over background concentrations within satellite-defined bloom features. The two years share a common trend of Hemiaulus dominance of the DDAs and substantial increases in the >10 μm chl a fraction (～40-90+% of total chl a). Integrated diatom abundance varied 10-fold over <10 km. Biogenic silica concentration tracked diatom abundance, was dominated by the >10 μm size fraction, and increased up to 5-fold in the blooms. The two years differed in the magnitude of the surface chl a increase (2009>2008), the abundance of pennate diatoms within the bloom (2009>2008), and the substantially greater mixed layer depth in 2009. Only the 2009 bloom had sufficient chl a in the >10 μm fraction to produce the observed ocean color chl increase. Blooms had high spatial variability; ocean color images likely average over numerous small events over time and space scales that exceed the individual event scale. Summertime DDA export flux noted at the Hawaii time-series Sta. ALOHA is probably a generalized feature of the eastern N. Pacific north to the subtropical front.     

Growth and viability of mycelial fragments of white-rot fungi on some hydrogels

The viability of mycelial fragments of Trametes versicolor and Irpex lacteus and their growth on selected hydrogels are described. The size of mycelial fragments of the fungi did not significantly influence their viability. Alginate hydrogel films supported fungal growth better than agarose, carrageenan, chitosan and gelatin films, and had the highest mechanical strength but were less hydrophilic than the other hydrogels. All commercial alginates that were tested supported aseptic growth of fungal fragments without prior sterilization of the hydrogel solution. The viability of mycelial fragments in the hydrogel solutions was higher for some commercial alginates than that in laboratory grade alginate. The mechanical strength and hydrophilicity of hydrogels from alginate type Sobalg FD 155 and Meer HV were comparable to that of laboratory grade alginate. Sterilization and pH of the alginate hydrogel did not significantly influence the growth of T. versicolor mycelial fragments but affected the growth of I. lacteus. Concentrations of alginate in the range of 1–2% in the hydrogel did not affect the growth of entrapped mycelial fragments of these fungi. Received 25 June 1997/ Accepted in revised form 07 March 1998     

Effect of dietary chitosans on trace iron, copper and zinc in mice

Dietary chitosans with different molecular weight M_w and the degree of deacetylation DDA (high molecular weight chitosan HCS with M_w 7.60 × 10⁵ and DDA 85.5%, middle molecular weight chitosan MCS with M_w 3.27 × 10⁴ and DDA 85.2%, chito-oligomer COS with M_w 0.99 × 10³ and DDA 85.7% and water-soluble chitosan WSC with M_w 3.91 × 10⁴ and DDA 52.6%) were used at the 1.05% level to feed mice for 90 days. Afterwards no pathological symptoms, clinical signs or deaths were observed. The body weight of mice in chitosan group and control group showed no significant difference. Although HCS, COS and WSC had no significant effect on the level of Fe, Zn and Cu in the tested mice’s liver, spleen, heart and kidney, MCS significantly increased the level of Fe, Zn and Cu in liver. Therefore dietary ingestion of chitosan did not depress the level of Fe, Zn and Cu in mice.     

Fibroblasts Isolated from Human Middle Turbinate Mucosa Cause Neural Progenitor Cells to Differentiate into Glial Lineage Cells

Transplantation of olfactory ensheathing cells (OECs) is a potential therapy for repair of spinal cord injury (SCI). Autologous transplantation of OECs has been reported in clinical trials. However, it is still controversial whether purified OECs or olfactory mucosa containing OECs, fibroblasts and other cells should be used for transplantation. OECs and fibroblasts were isolated from olfactory mucosa of the middle turbinate from seven patients. The percentage of OECs with p75^NTR+ and GFAP⁺ ranged from 9.2% to 73.2%. Fibroblasts were purified and co-cultured with normal human neural progenitors (NHNPs). Based on immunocytochemical labeling, NHNPs were induced into glial lineage cells when they were co-cultured with the mucosal fibroblasts. These results demonstrate that OECs can be isolated from the mucosa of the middle turbinate bone as well as from the dorsal nasal septum and superior turbinates, which are the typical sites for harvesting OECs. Transplantation of olfactory mucosa containing fibroblasts into the central nervous system (CNS) needs to be further investigated before translation to clinical application.     

Chitosan oligosaccharides, dp 2-8, have prebiotic effect on the Bifidobacterium bifidium and Lactobacillus sp

In order to investigate the prebiotic potential of chitosan oligosaccharide (COS), prepared by enzymatic hydrolysis of fully deacetylated chitosan polymer, the effect of COS on bacterial growth was studied. The degree of polymerization (dp) of COS was determined by MALDI-ToF mass spectrometry, and the COS was found to be composed of dimer (33.6%), trimer (16.9%), tetramer (15.8%), pentamer (12.4%), hexamer (8.3%), heptamer (7.1%), and octamer (5.9%). The minimum inhibitory concentrations (MIC) of chitosan polymer against lactic acid bacteria and bifidobacteria were below 0.31%. However, this only applied to two strains, the other bacteria tested grew on MRS broth containing 5% COS. The effects of COS on the growth of bifidobacteria and lactic acid bacteria were compared with those of fructo-oligosaccharide (FOS). FOS was found to have a growth stimulatory effect on only three strains: Bifidobacterium bifidium, B. infantis and Lactobacillus casei. However, COS stimulated the growth of most Lactobacillus sp. and B. bifidium KCTC 3440. The amount of the growth and the specific growth rate of B. bifidium increased with increasing COS concentration. The cultivation time required to obtain maximum growth was reduced to about 25% in MRS broth supplemented with 0.2-0.4% COS. These results demonstrate that COS has considerable bifidogenic potential. Both cell growth and specific growth rates of L. brevis in MRS broth supplemented with 0.1% COS increased by 25%. The present study shows that COS stimulates the growth of some enteric bacteria, and that COS has potential use as a prebiotic health-food.     

A chemical surface modification of chitosan by glycoconjugates to enhance the cell-biomaterial interaction

The use of wheat germ agglutinin (WGA), a lectin molecule, to modify chitosan and enhance the cell-biomaterial interaction was examined. The percentage of living fibroblast cells on the surfaces of tissue culture polystyrene (TCPS) control, WGA-modified chitosan, and unmodified chitosan films increased to 99%, 99%, and 85%, respectively, after seeding for 48 h. DNA staining revealed that a portion of fibroblasts cultivated on chitosan films( )were undergoing apoptosis. In contrast, fibroblasts growing on WGA-modified chitosan film surfaces did not show any indication of apoptosis. The number of fibroblast cells was the highest on the WGA-modified chitosan surfaces, followed by the TCPS and unmodified chitosan surfaces. This WGA-mediated enhancement on the fibroblast cell-biomaterial interaction was cell type dependent. Other types of cells may need different lectin molecules for enhanced interaction with biomaterials. Further, the evaluation of the heat shock protein (HSP) mRNA expression indicated that HSP 90 expression was increased in the fibroblast cells cultivated on chitosan films and decreased to basal levels on the WGA-modified chitosan films. Taken together, our data suggest that the use of WGA and other lectin molecules to enhance the cell-biomaterial interaction via oligosaccharide-mediated cell adhesion is a promising way to improve cell adhesion and proliferation, the two key issues in tissue engineering.     

Growth and osteogenic differentiation of adipose-derived and bone marrow-derived stem cells on chitosan and chitooligosaccharide films

Very low molecular weight chitooligosaccharide (COS, 1.4 kDa) and high molecular weight chitosan (1000 kDa) were comparatively studied in terms of physical and biological characteristics. Thin films of COS, chitosan and gelatin were prepared and crosslinked by dehydrothermal treatment at 140 °C for 24 h. COS film presented more hydrophilic property than chitosan film. Behaviors of rat adipose-derived stem cells (ASCs) and bone marrow-derived stem cells (MSCs) were investigated on COS and chitosan films, comparing to those on gelatin film. The results on cell spreading suggested that both ASCs and MSCs preferred to attach on COS film than chitosan film with 6–7 times larger cell areas. Numbers of both stem cells proliferated on COS film were approximately 3-fold higher than those on chitosan film. In addition, COS film enhanced osteogenic differentiating potential of MSCs, as observed from the alkaline phosphatase activity and calcium deposition. Therefore, in this work, COS was shown to be a more favorable material for the growth and osteogenic differentiation of both ASCs and MSCs, compared to high molecular weight chitosan.