Xyloglucan endotransglucosylase activity loosens a plant cell wall

BACKGROUND AND AIMS: Plant cells undergo cell expansion when a temporary imbalance between the hydraulic pressure of the vacuole and the extensibility of the cell wall makes the cell volume increase dramatically. The primary cell walls of most seed plants consist of cellulose microfibrils tethered mainly by xyloglucans and embedded in a highly hydrated pectin matrix. During cell expansion the wall stress is decreased by the highly controlled rearrangement of the load-bearing tethers in the wall so that the microfibrils can move relative to each other. Here the effect was studied of a purified recombinant xyloglucan endotransglucosylase/hydrolase (XTH) on the extension of isolated cell walls. METHODS: The epidermis of growing onion (Allium cepa) bulb scales is a one-cell-thick model tissue that is structurally and mechanically highly anisotropic. In constant load experiments, the effect of purified recombinant XTH proteins of Selaginella kraussiana on the extension of isolated onion epidermis was recorded. KEY RESULTS: Fluorescent xyloglucan endotransglucosylase (XET) assays demonstrate that exogeneous XTH can act on isolated onion epidermis cell walls. Furthermore, cell wall extension was significantly increased upon addition of XTH to the isolated epidermis, but only transverse to the net orientation of cellulose microfibrils. CONCLUSIONS: The results provide evidence that XTHs can act as cell wall-loosening enzymes.     

Loosening xyloglucan prevents tensile stress in tree stem bending but accelerates the enzymatic degradation of cellulose

In response to environmental variation, xyloglucan could fix the microfibrils to the inner surface of the wall to withstand the tensile stress generated within the G-layer. This would explain why the basal regions of stems of transgenic poplars overexpressing xyloglucanase could not bend upward. This finding has ramifications for the production of bioethanol, which requires tree cellulose to be enzymatically hydrolyzed. The level of cellulose degradation with enzymes was markedly increased in the xylem overexpressing xyloglucanase. We propose that xyloglucan serves as a key hemicellulose and a tightening tether of cellulose microfibrils in the secondary walls.     

Spatial organization of cellulose microfibrils and matrix polysaccharides in primary plant cell walls as imaged by multichannel atomic force microscopy

We used atomic force microscopy (AFM), complemented with electron microscopy, to characterize the nanoscale and mesoscale structure of the outer (periclinal) cell wall of onion scale epidermis – a model system for relating wall structure to cell wall mechanics. The epidermal wall contains ~100 lamellae, each ~40 nm thick, containing 3.5‐nm wide cellulose microfibrils oriented in a common direction within a lamella but varying by ~30 to 90° between adjacent lamellae. The wall thus has a crossed polylamellate, not helicoidal, wall structure. Montages of high‐resolution AFM images of the newly deposited wall surface showed that single microfibrils merge into and out of short regions of microfibril bundles, thereby forming a reticulated network. Microfibril direction within a lamella did not change gradually or abruptly across the whole face of the cell, indicating continuity of the lamella across the outer wall. A layer of pectin at the wall surface obscured the underlying cellulose microfibrils when imaged by FESEM, but not by AFM. The AFM thus preferentially detects cellulose microfibrils by probing through the soft matrix in these hydrated walls. AFM‐based nanomechanical maps revealed significant heterogeneity in cell wall stiffness and adhesiveness at the nm scale. By color coding and merging these maps, the spatial distribution of soft and rigid matrix polymers could be visualized in the context of the stiffer microfibrils. Without chemical extraction and dehydration, our results provide multiscale structural details of the primary cell wall in its near‐native state, with implications for microfibrils motions in different lamellae during uniaxial and biaxial extensions.     

Molecular Rigidity in Dry and Hydrated Onion Cell Walls

Solid-state nuclear magnetic resonance relaxation experiments can provide information on the rigidity of individual molecules within a complex structure such as a cell wall, and thus show how each polymer can potentially contribute to the rigidity of the whole structure. We measured the proton magnetic relaxation parameters T2 (spin-spin) and T1p (spin-lattice) through the 13C-nuclear magnetic resonance spectra of dry and hydrated cell walls from onion (Allium cepa L.) bulbs. Dry cell walls behaved as rigid solids. The form of their T2 decay curves varied on a continuum between Gaussian, as in crystalline solids, and exponential, as in more mobile materials. The degree of molecular mobility that could be inferred from the T2 and T1p decay patterns was consistent with a crystalline state for cellulose and a glassy state for dry pectins. The theory of composite materials may be applied to explain the rigidity of dry onion cell walls in terms of their components. Hydration made little difference to the rigidity of cellulose and most of the xyloglucan shared this rigidity, but the pectic fraction became much more mobile. Therefore, the cellulose/xyloglucan microfibrils behaved as solid rods, and the most significant physical distinction within the hydrated cell wall was between the microfibrils and the predominantly pectic matrix. A minor xyloglucan fraction was much more mobile than the microfibrils and probably corresponded to cross-links between them. Away from the microfibrils, pectins expanded upon hydration into a nonhomogeneous, but much softer, almost-liquid gel. These data are consistent with a model for the stress-bearing hydrated cell wall in which pectins provide limited stiffness across the thickness of the wall, whereas the cross-linked microfibril network provides much greater rigidity in other directions.     

Cell wall extension results in the coordinate separation of parallel microfibrils: evidence from scanning electron microscopy and atomic force microscopy

Enlargement of the cell wall requires separation of cellulose microfibrils, mediated by proteins such as expansin; according to the multi-net growth hypothesis, enlargement passively reorients microfibrils. However, at the molecular scale, little is known about the specific movement of microfibrils. To find out, we examined directly changes in microfibril orientation when walls were extended slowly in vitro under constant load (creep). Frozen-thawed cucumber hypocotyl segments were strained by 20-30% by incubation in pH 4.5 buffer or by incubation of heat-inactivated segments in alpha-expansin or a fungal endoglucanase (Cel12A). Subsequently, the innermost layer of the cell wall was imaged, with neither extraction nor homogenization, by field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). AFM images revealed that sample preparation for FESEM did not appreciably alter cell wall ultrastructure. In both FESEM and AFM, images from extended and non-extended samples appeared indistinguishable. To quantify orientational order, we used a novel algorithm to characterize the fast Fourier transform of the image as a function of spatial frequency. For both FESEM and AFM images, the transforms of non-extended samples were indistinguishable from those of samples extended by alpha-expansin or Cel12A, as were AFM images of samples extended by acidic buffer. We conclude that cell walls in vitro can extend slowly by a creep mechanism without passive reorientation of innermost microfibrils, implying that wall loosening agents act selectively on the cross-linking polymers between parallel microfibrils, rather than more generally on the wall matrix.     

Atomic force microscopy of microfibrils in primary cell walls

Examination of angiosperm primary cell walls by transmission electron microscopy shows that they contain microfibrils that probably consist of cellulose microfibrils surrounded by associated non-cellulosic polysaccharides. Previous studies using solid-state (13)C NMR spectroscopy have shown that the cellulose is all crystalline with crystallites of cross-sectional dimensions of 2-3 nm. However, it is not known if each microfibril contains only one, or more than one crystallite because there is no agreement about the dimensions of the microfibrils. Partially hydrated primary cell walls isolated from onion ( Allium cepa L.) and Arabidopsis thaliana (L.) Heynh. were examined by atomic force microscopy and the microfibril diameters determined. The cell walls of both species contained tightly interwoven microfibrils of uniform diameter: 4.4+/-0.13 nm in the onion and 5.8+/-0.17 nm in A. thaliana. The effect was also examined of extracting the A. thaliana cell walls to remove pectic polysaccharides. The microfibrils in the extracted cell walls of A. thaliana were significantly narrower (3.2+/-0.13 nm) than those in untreated walls. The results are consistent with the microfibrils containing only one cellulose crystallite.     

The Effect of Xyloglucans on the Degradation of Cell-Wall-Embedded Cellulose by the Combined Action of Cellobiohydrolase and Endoglucanases from Trichoderma viride

Two endoglucanases of Trichoderma viride, endoI and endoIV, were assayed for their activity toward alkali-extracted apple xyloglucans. EndoIV was shown to have a 60-fold higher activity toward xyloglucan than endoI, whereas carboxymethyl cellulose and crystalline cellulose were better substrates for the latter. The enzymic degradation of cellulose embedded in the complex cell-wall matrix of apple fruit tissue has been studied using cellobiohydrolase (CBH) and these two different endoglucanases. A high-performance liquid chromatographic method (Aminex HPX-22H) was used to monitor the release of cellobiose and oligomeric xyloglucan fragments. Synergistic action between CBH and endoglucanases on cell-wall-embedded cellulose was, with respect to their optimal ratio, slightly different from that reported for crystalline cellulose. The combination of endoIV and CBH solubilized twice as much cellobiose compared to a combination of endoI and CBH. Apparently, the concomitant removal of the xyloglucan coating from cellulose microfibrils by endoIV is essential for an efficient degradation of cellulose in a complex matrix. Cellulose degradation slightly enhanced the solubilization of xyloglucans. These results indicate optimal degradation of cell-wall-embedded cellulose by a three-enzyme system consisting of an endoglucanase with high affinity toward cellulose (endoI), a xyloglucanase (endoIV), and CBH.     

Simulations of the static and dynamic molecular conformations of xyloglucan. The role of the fucosylated sidechain in surface-specific sidechain folding.

The hemicellulosic polysaccharide xyloglucan binds with a strong affinity to cellulosic cell wall microfibrils, the resulting heterogeneous network constituting up to 50% of the dry weight of the cell wall in dicotyledonous plants. To elucidate the molecular details of this interaction, we have performed theoretical potential energy calculations of the static and dynamic equilibrium conformations of xyloglucan using the GEGOP software. In particular, we have evaluated the preferred sidechain conformations of hexa-, octa-, deca- and heptadecasaccharide model fragments of xyloglucan for molecules with a cellulose-like, flat, glucan backbone, and a cellobiose-like, twisted, glucan backbone conformation. For the flat backbone conformation the determination of static equilibrium molecular conformations revealed a tendency for sidechains to fold onto one surface of the backbone, defined here as the H1S face, in the fucosylated region of the polymer. This folding produces a molecule that is sterically accessible on the opposite face of the backbone, the H4S face. Typically, this folding onto the H1S surface is significantly stabilized by favorable interactions between the fucosylated, trisaccharide sidechain and the backbone, with some stabilization from adjacent terminal xylosyl sidechains. In contrast, the trisaccharide sidechain folds onto the H4S face of xyloglucan fragments with a twisted backbone conformation. Preliminary NMR data on nonasaccharide fragments isolated from sycamore suspension-cultured cell walls are consistent with the hypothesis that the twisted conformation of xyloglucan represents the solution form of this molecule. Metropolis Monte Carlo (MMC) simulations were employed to assess sidechain flexibility of the heptadecasaccharide fragments. Simulations performed on the flat, rigid, backbone xyloglucan indicate that the trisaccharide sidechain is less mobile than the terminal xylosyl sidechains. MMC calculations on a fully relaxed molecule revealed a positive correlation between a specific trisaccharide sidechain orientation and the 'flatness' of the backbone glucosyl residues adjacent to this sidechain. These results suggest that the trisaccharide sidechain may play a role in the formation of nucleation sites that initiate the binding of these regions to cellulose. Based on these conformational preferences we suggest the following model for the binding of xyloglucan to cellulose. Nucleation of a binding site is initiated by the fucosylated, trisaccharide sidechain that flattens out an adjacent region of the xyloglucan backbone. Upon contacting a cellulose microfibril this region spreads by step-wise flattening of successive segments of the backbone. Self-association of xyloglucan molecules in solution may be prevented by the low frequency of formation of these nucleation sites and the geometry of the molecules in solution.     

Characterization of cross-links between cellulose microfibrils, and their occurrence during elongation growth in pea epicotyl

The occurrence and chemical nature of the cross-links between cellulose microfibrils in outer epidermal cell walls in Pisum sativum cv. Alaska was investigated by rapid-freezing and deep-etching techniques coupled with chemical and enzymatic treatments. The cell wall in the elongating region of epidermal cells was characterized by the absence of the cross-links, while in the elongated region, the cell wall was characterized by the presence of cross-links. The cross-links remained in the cell wall of the elongated region after treatment with SDS electrophoresis sample buffer and treatment with 4% potassium hydroxide. After treatment with endo-1,4-beta-glucanase, which fragments xyloglucan, the cross-links were remarkably reduced from the cell wall of the elongated region. The endoglucanase treatment also reduced immunogold labeling of xyloglucan in the cell wall. The endoglucanase hydrolysate from the cell wall fraction of the elongated region gave spots of oligosaccharides in thin layer chromatography, which were identical to the spots of xyloglucan oligosaccharides produced by xyloglucanase from both the cell wall fraction and tamarind xyloglucan. These results indicate that the cross-links are made of xyloglucan. We discussed the possibility of cross-links involved in the control of mechanical properties of the cell wall.     

XTH acts at the microfibril-matrix interface during cell elongation

Sulphorhodamine-labelled oligosaccharides of xyloglucan are incorporated into the cell wall of Arabidopsis and tobacco roots, and of cultured Nicotiana tabacum cells by the transglucosylase (XET) action of XTHs. In the cell wall of diffusely growing cells, the subcellular pattern of XET action revealed a 'fibrillar' pattern, different from the xyloglucan localization. The fibrillar fluorescence pattern had no net orientation in spherical cultured cells. It changed to transverse to the long axis when the cells started to elongate, a feature mirroring the rearrangements of cortical microtubules and the accompanying cellulose deposition. Interference with the polymerization of microtubules and with cellulose deposition inhibited this strong and 'fibrillar'-organized XET-action, whereas interference with actin-polymerization only decreased the intensity of enzyme action. Epidermal cells of a mutant with reduced cellulose synthesis also had low XET action. Root hairs (tip-growing cells) exhibited high XET-action over all their length, but lacked the specific parallel pattern. In both diffuse- and tip-growing cell types extraction of the incorporated fluorescent xyloglucans by a xyloglucan-specific endoglucanase reduced the fluorescence, but the 'fibrillar' appearance in diffuse growing cells was not eliminated. These results show that XTHs act on the xyloglucans attached to cellulose microfibrils. After incorporation of the fluorescent oligosaccharides, the xyloglucans decorate the cellulose microfibrils and become inaccessible to hydrolytic enzymes.     

The xyloglucan-cellulose assembly at the atomic scale

The assembly of cell wall components, cellulose and xyloglucan (XG), was investigated at the atomistic scale using molecular dynamics simulations. A molecular model of a cellulose crystal corresponding to the allomorph Ibeta and exhibiting a flexible complex external morphology was employed to mimic the cellulose microfibril. The xyloglucan molecules considered were the three typical basic repeat units, differing only in the size of one of the lateral chain. All the investigated XG fragments adsorb nonspecifically onto cellulose fiber; multiple arrangements are equally probable, and every cellulose surface was capable of binding the short XG molecules. The following structural effects emerged: XG molecules that do not have any long side chains tended to adapt themselves nicely to the topology of the microfibril, forming a flat, outstretched conformation with all the sugar residues interacting with the surface. In contrast, the XG molecules, which have long side chains, were not able to adopt a flat conformation that would enable the interaction of all the XG residues with the surface. In addition to revealing the fundamental atomistic details of the XG adsorption on cellulose, the present calculations give a comprehensive understanding of the way the XG molecules can unsorb from cellulose to create a network that forms the cell wall. Our revisited view of the adsorption features of XG on cellulose microfibrils is consistent with experimental data, and a model of the network is proposed.     

A revised architecture of primary cell walls based on biomechanical changes induced by substrate-specific endoglucanases

Xyloglucan is widely believed to function as a tether between cellulose microfibrils in the primary cell wall, limiting cell enlargement by restricting the ability of microfibrils to separate laterally. To test the biomechanical predictions of this "tethered network" model, we assessed the ability of cucumber (Cucumis sativus) hypocotyl walls to undergo creep (long-term, irreversible extension) in response to three family-12 endo-β-1,4-glucanases that can specifically hydrolyze xyloglucan, cellulose, or both. Xyloglucan-specific endoglucanase (XEG from Aspergillus aculeatus) failed to induce cell wall creep, whereas an endoglucanase that hydrolyzes both xyloglucan and cellulose (Cel12A from Hypocrea jecorina) induced a high creep rate. A cellulose-specific endoglucanase (CEG from Aspergillus niger) did not cause cell wall creep, either by itself or in combination with XEG. Tests with additional enzymes, including a family-5 endoglucanase, confirmed the conclusion that to cause creep, endoglucanases must cut both xyloglucan and cellulose. Similar results were obtained with measurements of elastic and plastic compliance. Both XEG and Cel12A hydrolyzed xyloglucan in intact walls, but Cel12A could hydrolyze a minor xyloglucan compartment recalcitrant to XEG digestion. Xyloglucan involvement in these enzyme responses was confirmed by experiments with Arabidopsis (Arabidopsis thaliana) hypocotyls, where Cel12A induced creep in wild-type but not in xyloglucan-deficient (xxt1/xxt2) walls. Our results are incompatible with the common depiction of xyloglucan as a load-bearing tether spanning the 20- to 40-nm spacing between cellulose microfibrils, but they do implicate a minor xyloglucan component in wall mechanics. The structurally important xyloglucan may be located in limited regions of tight contact between microfibrils.     

Changes in cell wall biomechanical properties in the xyloglucan-deficient xxt1/xxt2 mutant of Arabidopsis

The main load-bearing network in the primary cell wall of most land plants is commonly depicted as a scaffold of cellulose microfibrils tethered by xyloglucans. However, a xyloglucan-deficient mutant (xylosyltransferase1/xylosyltransferase2 [xxt1/xxt2]) was recently developed that was smaller than the wild type but otherwise nearly normal in its development, casting doubt on xyloglucan's role in wall structure. To assess xyloglucan function in the Arabidopsis (Arabidopsis thaliana) wall, we compared the behavior of petiole cell walls from xxt1/xxt2 and wild-type plants using creep, stress relaxation, and stress/strain assays, in combination with reagents that cut or solubilize specific components of the wall matrix. Stress/strain assays showed xxt1/xxt2 walls to be more extensible than wild-type walls (supporting a reinforcing role for xyloglucan) but less extensible in creep and stress relaxation processes mediated by α-expansin. Fusicoccin-induced "acid growth" was likewise reduced in xxt1/xxt2 petioles. The results show that xyloglucan is important for wall loosening by α-expansin, and the smaller size of the xxt1/xxt2 mutant may stem from the reduced effectiveness of α-expansins in the absence of xyloglucan. Loosening agents that act on xylans and pectins elicited greater extension in creep assays of xxt1/xxt2 cell walls compared with wild-type walls, consistent with a larger mechanical role for these matrix polymers in the absence of xyloglucan. Our results illustrate the need for multiple biomechanical assays to evaluate wall properties and indicate that the common depiction of a cellulose-xyloglucan network as the major load-bearing structure is in need of revision.     

Disentangling loosening from softening: insights into primary cell wall structure

How cell wall elasticity, plasticity, and time‐dependent extension (creep) relate to one another, to plant cell wall structure and to cell growth remain unsettled topics. To examine these issues without the complexities of living tissues, we treated cell‐free strips of onion epidermal walls with various enzymes and other agents to assess which polysaccharides bear mechanical forces in‐plane and out‐of‐plane of the cell wall. This information is critical for integrating concepts of wall structure, wall material properties, tissue mechanics and mechanisms of cell growth. With atomic force microscopy we also monitored real‐time changes in the wall surface during treatments. Driselase, a potent cocktail of wall‐degrading enzymes, removed cellulose microfibrils in superficial lamellae sequentially, layer‐by‐layer, and softened the wall (reduced its mechanical stiffness), yet did not induce wall loosening (creep). In contrast Cel12A, a bifunctional xyloglucanase/cellulase, induced creep with only subtle changes in wall appearance. Both Driselase and Cel12A increased the tensile compliance, but differently for elastic and plastic components. Homogalacturonan solubilization by pectate lyase and calcium chelation greatly increased the indentation compliance without changing tensile compliances. Acidic buffer induced rapid cell wall creep via endogenous α‐expansins, with negligible effects on wall compliances. We conclude that these various wall properties are not tightly coupled and therefore reflect distinctive aspects of wall structure. Cross‐lamellate networks of cellulose microfibrils influenced creep and tensile stiffness whereas homogalacturonan influenced indentation mechanics. This information is crucial for constructing realistic molecular models that define how wall mechanics and growth depend on primary cell wall structure.     

In vitro assembly of cellulose/xyloglucan networks: ultrastructural and molecular aspects

Features of the interaction between cellulose and xyloglucan have been studied using the cellulose-producing bacterium Acetobacter aceti ssp. xylinum (ATCC 53524) and tamarind seed xyloglucan. Direct microscopic evidence is provided for the generation of cross-bridges between cellulose ribbons produced in the presence of xyloglucan but not carboxymethyl-cellulose. Cross-bridge lengths are very similar to those observed for de-pectinated onion cell walls. Similar cross-bridge lengths are observed following mixing of isolated A. xylinum cellulose and xyloglucan, showing that network formation can be an abiotic process. The level of incorporation of xyloglucan in an actively growing system (ca. 38% of cellulose) is an order of magnitude higher than that observed in mixtures of isolated polymers and is comparable with cell wall levels. NMR spectroscopy suggests that 80–85% of incorporated xyloglucan is segmentally rigid with the backbone adopting an extended ‘cellulosic’ conformation and probably aligned with cellulose chains. The remaining xyloglucan is more mobile and is assigned to cross-bridges with, on average, a twisted backbone conformation. No evidence for specific involvement of side-chain residues in binding is found, and the observation of cross-bridges with a non-fucosylated xyloglucan shows that fucose residues are not essential for network formation. Xyloglucan causes cellulose ribbons to become more amorphous and to have a decreased 1α/1β crystallite ratio without any significant alteration in ribbon diameter. Based on the findings that levels of xyloglucan incorporation, the presence and lengths of cross-bridges, and the modification of cellulosic molecular organization are all similar to those found in plant cell walls, we suggest that A. aceti ssp. xylinum is a more useful model for primary plant cell walls and their assembly than has previously been appreciated.     

Pea Xyloglucan and Cellulose: VI. Xyloglucan-Cellulose Interactions in Vitro and in Vivo

Since xyloglucan is believed to bind to cellulose microfibrils in the primary cell walls of higher plants and, when isolated from the walls, can also bind to cellulose in vitro, the binding mechanism of xyloglucan to cellulose was further investigated using radioiodinated pea xyloglucan. A time course for the binding showed that the radioiodinated xyloglucan continued to be bound for at least 4 hours at 40°C. Binding was inhibited above pH 6. Binding capacity was shown to vary for celluloses of different origin and was directly related to the relative surface area of the microfibrils. The binding of xyloglucan to cellulose was very specific and was not affected by the presence of a 10-fold excess of (1→2)-β-glucan, (1→3)-β-glucan, (1→6)-β-glucan, (1→3, 1→4)-β-glucan, arabinogalactan, or pectin. When xyloglucan (0.1%) was added to a cellulose-forming culture of Acetobacter xylinum, cellulose ribbon structure was partially disrupted indicating an association of xyloglucan with cellulose at the time of synthesis. Such a result suggests that the small size of primary wall microfibrils in higher plants may well be due to the binding of xyloglucan to cellulose during synthesis which prevents fasciation of small fibrils into larger bundles. Fluorescent xyloglucan was used to stain pea cell wall ghosts prepared to contain only the native xyloglucan:cellulose network or only cellulose. Ghosts containing only cellulose showed strong fluorescence when prepared before or after elongation; as predicted, the presence of native xyloglucan in the ghosts repressed binding of added fluorescent xyloglucan. Such ghosts, prepared after elongation when the ratio of native xyloglucan:cellulose is substantially reduced, still showed only faint fluorescence, indicating that microfibrils continue to be coated with xyloglucan throughout the growth period.     

Pine xyloglucan. Occurrence, localization and interaction with cellulose

The occurrence, localization, and properties of xyloglucan in the cell walls of growing regions of Pinus pinaster hypocotyls have been studied. Xyloglucan was released from the cell wall with alkali solutions, the concentration increasing from 4 through 35%; KOH. In vitro experiments showed that xyloglucan and cellulose can interact, forming a macromolecular complex. Electron microscope observations showed that the cell wall material extracted with 35%; KOH, which contained some amount of xyloglucan, was enough to cover and join the cellulose microfibrils.     

Cellulose orientation determines mechanical anisotropy in onion epidermis cell walls

The role of cellulose microfibril orientation in determining cell wall mechanical anisotropy and in the control of the wall plastic versus elastic properties was studied in the adaxial epidermis of onion bulb scales using the constant-load (creep) test. The mean or net cellulose orientation in the outer periclinal wall of the epidermis was parallel to the long axis of the cells. In vitro cell wall extensibility was 30-90% higher in the direction perpendicular to the net microfibril orientation than parallel to it. This was the case for the size of the initial deformation occurring just after the load application and for the rate of time-dependent creep. Loading/unloading experiments confirmed the presence of a real irreversible component in cell wall extension. The plastic component of the time-dependent deformation was higher perpendicular to the net cellulose orientation than parallel to it. An acid buffer (pH 4.5) increased the creep rate by 25-30% but this response was not related to cellulose orientation. The present data provide direct evidence that the net orientation of cellulose microfibrils confers mechanical anisotropy to the walls of seed plants, a characteristic that may be relevant to understanding anisotropic cell growth.     

How do cell walls regulate plant growth?

The cell wall of growing plant tissues has frequently been interpreted in terms of inextensible cellulose microfibrils 'tethered' by hemicellulose polymers attached to the microfibril surface by hydrogen bonds, with growth occurring when tethers are broken or 'peeled' off the microfibril surface by expansins. This has sometimes been described as the 'sticky network' model. In this paper, a number of theoretical difficulties with this model, and discrepancies between predicted behaviour and observations by a number of researchers, are noted. (i) Predictions of cell wall moduli, based upon the sticky network model, suggest that the cell wall should be much weaker than is observed. (ii) The maximum hydrogen bond energy between tethers and microfibrils is less than the work done in expansion and therefore breakage of such hydrogen bonds is unlikely to limit growth. (iii) Composites of bacterial cellulose with xyloglucan are weaker than pellicles of pure cellulose so that it seems unlikely that hemicelluloses bind the microfibrils together. (iv) Calcium chelators promote creep of plant material in a similar way to expansins. (v) Reduced relative 'permittivities' inhibit the contraction of cell wall material when an applied stress is decreased. Revisions of the sticky network model that might address these issues are considered, as are alternatives including a model of cell wall biophysics in which cell wall polymers act as 'scaffolds' to regulate the space available for microfibril movement. Experiments that support the latter hypothesis, by demonstrating that reducing cell wall free volume decreases extensibility, are briefly described.     

Alteration of oriented deposition of cellulose microfibrils by mutation of a katanin-like microtubule-severing protein

It has long been hypothesized that cortical microtubules (MTs) control the orientation of cellulose microfibril deposition, but no mutants with alterations of MT orientation have been shown to affect this process. We have shown previously that in Arabidopsis, the fra2 mutation causes aberrant cortical MT orientation and reduced cell elongation, and the gene responsible for the fra2 mutation encodes a katanin-like protein. In this study, using field emission scanning electron microscopy, we found that the fra2 mutation altered the normal orientation of cellulose microfibrils in walls of expanding cells. Although cellulose microfibrils in walls of wild-type cells were oriented transversely along the elongation axis, cellulose microfibrils in walls of fra2 cells often formed bands and ran in different directions. The fra2 mutation also caused aberrant deposition of cellulose microfibrils in secondary walls of fiber cells. The aberrant orientation of cellulose microfibrils was shown to be correlated with disorganized cortical MTs in several cell types examined. In addition, the thickness of both primary and secondary cell walls was reduced significantly in the fra2 mutant. These results indicate that the katanin-like protein is essential for oriented cellulose microfibril deposition and normal cell wall biosynthesis. We further demonstrated that the Arabidopsis katanin-like protein possessed MT-severing activity in vitro; thus, it is an ortholog of animal katanin. We propose that the aberrant MT orientation caused by the mutation of katanin results in the distorted deposition of cellulose microfibrils, which in turn leads to a defect in cell elongation. These findings strongly support the hypothesis that cortical MTs regulate the oriented deposition of cellulose microfibrils that determines the direction of cell elongation.