Interaction between filamentous actin and lipid bilayer causes the increase of syringomycin E channel-forming activity

The effect of filamentous (F) actin on the channel-forming activity of syringomycin E (SRE) in negatively charged and uncharged bilayer lipid membranes (BLM) was studied. F-actin did not affect the membrane conductance in the absence of SRE. No changes in SRE-induced membrane conductance were observed when the above agents were added to the same side of BLM. However, the opposite side addition of F-actin and SRE provokes a multiple increase in membrane conductance. The similar voltage dependence of membrane conductance, equal values of single channel conductance and the effective gating charge of the channels upon F-actin action suggests that the actin-dependent increase in BLM conductance may result from an increase in the number of opened SRE-channels. BLM conductance kinetics depends on the sequence of SRE and F-actin addition, suggesting that actin-dependent rise of conductance may be induced by BLM structural changes that follow F-actin adsorption. F-actin exerted similar effect on membrane conductance of both negatively charged and uncharged bilayers, as well as on conductance of BLM with high ionic strength bathing solution, suggesting the major role for hydrophobic interactions in F-actin adsorption on lipid bilayer.     

Pore-forming properties of iturin A, a lipopeptide antibiotic

The addition of iturin A, a lipopeptide antibiotic extracted from Bacillus subtilis, to a bimolecular lipid membrane (BLM) increases dramatically its electrical conductance. For very low concentration of iturin A, discrete conductance steps are observed which are assigned to the formation of conducting pores. The characteristics of these pores depend on the lipid content of the BLM and they change with time. Cholesterol considerably increases the lifetimes of open states. The pores are slightly anion versus cation selective. These first observations unable us to briefly discuss the pore-forming properties of lipopeptides.     

Structure and mechanism of action of the antimicrobial peptide piscidin

Piscidin, an antibacterial peptide isolated from the mast cells of striped bass, has potent antimicrobial activity against a broad spectrum of pathogens in vitro. We investigated the mechanism of action of this 22-residue cationic peptide by carrying out structural studies and electrophysiological experiments in lipid bilayers. Circular dichroism experiments showed that piscidin was unstructured in water but had a high alpha-helix content in dodecylphosphocholine (DPC) micelles. 1H NMR data in water and TFE confirmed these results and demonstrated that the segment of residues 8-17 adopted an alpha-helical structure in a micellar environment. This molecule has a marked amphipathic character, due to well-defined hydrophobic and hydrophilic sectors. This structure is similar to those determined for other cationic peptides involved in permeabilization of the bacterial membrane. Multichannel experiments with piscidin incorporated into azolectin planar bilayers gave reproducible I-V curves at various peptide concentrations and unambiguously showed that this peptide permeabilized the membrane. This pore forming activity was confirmed by single-channel experiments, with well-defined ion channels obtained at different voltages. The characteristics of the ion channels (voltage dependence, only one or two states of conductance) clearly suggest that piscidin is more likely to permeabilize the membrane by toroidal pore formation rather than via the "barrel-stave" mechanism.     

The effect of rimantadine on the structure of model and biological membranes

The action of the antiviral drug rimantadine on the structure of bilayer lipid membranes (BLM) and RBC membranes was investigated. Structural changes in BLM were recorded by ionophore conductivity changes and by changes in the third harmonic of capacity current signal due to lateral compression of BLM in an electric field. It was shown that the adsorption of rimantadine on BLM results in an increase in ionophore mobility in bilayer membranes of dioleolyllecithin (DOL) and common lipids of bovine brain (CL) and in a decrease in those of azolectin (A). Relative changes in the third harmonic signal also depend on the membrane composition and have different signs. The results may be explained by the rimantadine action on the lipid bilayer structure: "rigidification" of A-membranes and "fluidization" of BLM from DOL and CL. Structural reorganization of RBC membranes as investigated by the ability of the cells to enter a micropipette (inner diameter greater than or equal to 3 microns) thereby undergoing deformation. It was shown that rimantadine influences RBC deformability due to drug induced inhomogenous mechanical membrane properties. Also, rimantadine accelerated the process of artificially induced aggregation of erythrocytes. The relation of the effects on artificial and biological membranes, and the structural changes in the lipid phase of membrane are discussed.     

Bilayer lipid membranes supported on Teflon filters: a functional environment for ion channels

Many ion channel proteins have binding sites for toxins and pharmaceutical drugs and therefore have much promise as the sensing entity in high throughput technologies and biosensor devices. Measurement of ionic conductance changes through ion channels requires a robust biological membrane with sufficient longevity for practical applications. The conventional planar BLM is 100-300 μm in diameter and typically contains fewer than a dozen channels whereas pharmaceutical screening methods in cells use current recordings for many ion channels. We present a new, simple method for the fabrication of a disposable porous-supported bilayer lipid membrane (BLM) ion channel biosensor using hydrated Teflon (polytetrafluoroethylene, PTFE) filter material (pore size 5 μm, filter diameter=1 mm). The lipid layer was monitored for its thickness and mechanical stability by electrical impedance spectroscopy. The results showed membrane capacitances of 1.8±0.2 nF and membrane resistances of 25.9±4.1 GΩ, indicating the formation of lipid bilayers. The current level increased upon addition of the pore-forming peptide gramicidin. Following addition of liposomes containing voltage-gated sodium channels, small macroscopic sodium currents (1-80 pA) could be recorded. By preloading the porous Teflon with sodium channel proteoliposomes, prior to BLM formation, currents of 1-10 nA could be recorded in the presence of the activator veratridine that increased with time, and were inhibited by tetrodotoxin. A lack of rectification suggests that the channels incorporated in both orientations. This work demonstrates that PTFE filters can support BLMs that provide an environment in which ion channels can maintain their functional activity relevant for applications in drug discovery, toxin detection, and odour sensing.     

The electrical breakdown of cell and lipid membranes: the similarity of phenomenologies

The current responses of human erythrocyte and L-cell membranes being subject to rectangular voltage pulses of 150-700 mV amplitude and 5 X 10(-3)-10 s duration were recorded by means of the patch-clamp method. The behaviour of planar lipid bilayer membranes of oxidized cholesterol and UO2(2+)-modified bilayers of azolectin in a high electric field was investigated for comparison. The gradual growth in the conductance (reversible electrical breakdown) was found for both the cell membranes and lipid bilayers of the compositions studied, with the application of voltage pulses of sufficient duration, to be completed by its drastic enhancement (irreversible breakdown). The time interval preceding the irreversible breakdown and the rate of increase in conductance during the reversible breakdown are determined by the amplitude of the voltage applied. The recovery of the initial properties of the membrane following the reversible breakdown consists of the two stages, the latter substantially differing by their characteristic times. The first very rapid stage (tau much less than 1 ms) reflects the lowering of the conductance of small pores with decreasing voltage across the membrane. The diminishing of the number and mean radii of the pores resulting in their complete disappearance occurs only at the second stage of membrane healing, which lasts several seconds or even minutes. The phenomenological similarity of the cell and lipid membrane breakdown indicates that pores developed during the electrical breakdown of biological membranes arise in their lipid matrices. The structure and the properties of the pores are discussed.     

Correlations between changes in membrane capacitance induced by changes in ionic environment and the conductance of channels incorporated into bilayer lipid membranes

The action of metal polycations and pH on ionic channels produced in bilayer lipid membranes (BLM) by three different toxins was studied by measuring membrane capacitance and channel conductance. Here, we show that critical concentrations of Cd²⁺, La³⁺ or Tb³⁺ induce complex changes in membrane capacitance. The time course of capacitance changes is similar to the time course of channel blocking by these ions at low concentration. No changes in BLM capacitance or conductance were observed in the range of pH 5.8–9.0. A pH shift from 7.4 to 3–4 or 11–12 induced large changes in BLM capacitance and channel conductance. For all studied channel-forming proteins, the initial capacitance increase preceded the conductance decrease caused by addition of polycations or by a change in pH. A close relationship between membrane lipid packing and ion channel protein is suggested.     

多重扫描伏安法在平面双分子脂膜(BLM)研究中的应用

本文阐明了伏安技术对重组膜的各种电性质测量原理和方法,并用多重扫描技术着重研究了膜电导的可逆跃迁变化,以及扫描速度和电压的影响,结果指出,伏安法可能发展成一种研究重组膜离子通道现象的新手段.     

Ca++-induced fusion of fragmented sarcoplasmic reticulum with artificial planar bilayers

Summary Addition of fragmented sarcoplasmic reticulum (SR) vesicles to the aqueous phase of a black lipid membrane (BLM) causes a large increase in BLM conductance within 10 min. The conductance increase is absolutely dependent on three conditions: The presence of at least 0.5mm Ca⁺⁺, an acidic phospholipid such as phosphatidylserine or diphosphatidylglycerol in the BLM phospholipid mixture, and an osmotic gradient across the SR vesicle membrane, with the internal osmolarity greater than the external. These requirements are identical to conditions under which the fusion of phospholipid vesicles occurs.When the early part of the time course of conductance rise is examined at high sensitivity, the conductance is seen to increase in discrete steps. The probability of a step increases with the concentration of Ca⁺⁺ in the medium, with the fraction of acidic phospholipid in the BLM, and with the size of the osmotic gradient across the SR vesicle membrane. On the other hand, the average conductance change per step is independent of the above parameters, but varies with the type and concentration of ions present in the aqueous phase. For a given ion, the mean specific conductance per step is independent of the ion's concentration between 10 and 100mm.The probability distribution of the step-conductances agrees well with the distribution of SR vesicle surface areas, both before and after sonication of the vesicles.The evidence indicates that SR vesicles fuse with the BLM, thereby inserting SR membrane conductance pathways into it. Each discrete conductance jump appears to be the result of the fusion of a single SR vesicle with the BLM. This technique may serve as a general method for inserting membrane vesicles into an electrically accessible system.     

Study of conductance changes of bilayer lipid membrane induced by electric field

Changes in the bilayer lipid membrane (BLM) conductance induced by electric field were studied. BLMs were formed from diphytanoylphosphocholine (DPhPC) solution in squalene. Certain time after a constant voltage (200-500 mV) was applied to the BLM in the voltage-clamp mode, the BLM conductance started to grow up to approximately 10 nS until the BLM ruptured. The conductance often changed abruptly (with the front duration of less than 33 micros) and then stabilized for a relatively long time (up to 10; 300 ms on average) thus resembling the ion channel activity. The mean amplitude of conductance steps was 650 pS. However, in some cases a slow conductance drift was recorded. When N-methyl-D-glucamine/glutamate ions were used instead of KCl, the conductance changes became 5 times smaller. We suggest that formation in the BLM of single pores approximately 1 nm in diameter should result in the observed changes in BLM conductance. The BLM conductance growth was due to consecutive opening of several such pores. When the electric field amplitude was abruptly decreased (down to 50-100 mV), the conductance dropped rapidly to the background value. When we increased the voltage again, the BLM conductance right after the increase depended on the time BLM spent under "weak" electric field. If this time exceeded 500 ms, the conductance was at the background level, but when the time was diminished, the conductance reached the value recorded before the voltage decrease. These data imply that the closure of the pores should lead to the formation in BLM of small defects (prepores) that can be easily transformed into pores when the voltage is increased. The lifetimes of such prepores did not exceed 500 ms.     

Peptide-induced membrane elastic deformations decelerate gramicidin dimer-monomer equilibration

Gramicidin A (gA) is a hydrophobic pentadecapeptide readily incorporating into a planar bilayer lipid membrane (BLM), thereby inducing a large macroscopic current across the BLM. This current results from ion-channel formation due to head-to-head transbilayer dimerization of gA monomers with rapidly established monomer-dimer equilibrium. Any disturbance of the equilibrium, e.g., by sensitized photoinactivation of a portion of gA monomers, causes relaxation toward a new equilibrium state. According to previous studies, the characteristic relaxation time of the gA-mediated electric current decreases as the current increases upon elevating the gA concentration in the membrane. Here, we report data on the current relaxation kinetics for gA analogs with N-terminal valine replaced by glycine or tyrosine. Surprisingly, the relaxation time increased rather than decreased upon elevation of the total membrane conductance induced by these gA analogs, thus contradicting the classical kinetic scheme. We developed a general theoretical model that accounts for lateral interaction of monomers and dimers mediated by membrane elastic deformations. The modified kinetic scheme of the gramicidin dimerization predicts the reverse dependence of the relaxation time on membrane conductance for gA analogs, with a decreased dimerization constant that is in a good agreement with our experimental data. The equilibration process may be also modulated by incorporation of other peptides (“impurities”) into the lipid membrane.     

An ion-channel forming protein produced by Entamoeba histolytica.

We have identified a remarkable ion-channel forming material in virulent strains of Entamoeba histolytica that may be responsible for many of the symptoms associated with amoebic dysentery. A polypeptide that we refer to as amoebapore is shed into the growth media and is also found within the amoeba in a high speed sedimentable fraction. Amoebapore has the distinctive property of spontaneously incorporating into lipid bilayers, liposomes, and cells, leading to progressive and irreversible changes in the ion conductance of the target membranes. Exposure of planar lipid bilayers to amoebapore -containing fractions under voltage clamp conditions results in an almost immediate and progressive incorporation of ion channels which continues in an irreversible manner leading to a fall in membrane impedance of up to five orders of magnitude. The ion-channel conductance is moderately cation-selective, voltage dependent, and displays a unit size of 1.6 +/- 0.2 nanoSiemens in 1 M KCl at -10 mV. In the bilayer, the amoebapore -induced conductance exhibits an in situ sensitivity to protease. Amoebapore is mainly concentrated in a fraction sedimenting at 150 000 g. It is insoluble in Triton X-100 but can be dissociated in an active state in 1% SDS. Under these conditions it has an apparent mol. wt. of 13 000 daltons.     

Angiotensin II-induced formation of ionic channels in bilayer lipid membranes.

The interaction of angiotensin II (ANG II) with membrane was studied by measuring conductance and current-voltage characteristics (IVC) of bilayer lipid membranes (BLM) prepared of a mixture of egg lecithin with cholesterol, and of gramicidin D-modified membranes of the same composition. Addition of physiological concentrations of ANG II (approx. 15 mumol/l) into the electrolyte (1 mol/l KCl, pH = 7) in contact with one side of BLM resulted in the appearance of discrete membrane conductance (symbol; see text) = (39.5 +/- 1.07) pS with a duration of the conductivity state tau = (52.15 +/- 6.44) s. Raising ANG II concentration to 75 mumol/l resulted in an additional conductance level of approx. 130 pS with a lifetime of approx. 1s. The electrolyte pH markedly influenced ANG II modified BLM conductance. A decrease of the electrolyte pH to 2.8 resulted in a reduction of the discrete conductance level to approx. 14 pS, whereas ANG did not induce any conductivity at pH = 11.5. The results obtained suggest that ion channels are formed consisting at least of two ANG II molecules. IVC of ANG II-modified BLM are superlinear within the range of electrolyte concentrations studied (between 0.01 and 3 mol/l KCl), i.e, the limiting stage of ion transport is the internal area of the conducting pore. ANG II affects in a cooperative manner the gramicidin D (GRD)-mediated transport, most likely by forming ANG II aggregates in the area of local inhomogeneities in the BLM structure of GRD channels.     

Antibacterial peptide pleurocidin forms ion channels in planar lipid bilayers

Pleurocidin, a 25-residue alpha helical cationic peptide, isolated from skin mucous secretions of the winter flounder, displays a strong anti-microbial activity and appears to play a role in innate host defence. This peptide would be responsible for pore formation in the membrane of bacteria leading to lysis and therefore death. In this study, we investigated the behaviour of pleurocidin in different planar lipid bilayers to determine its mechanism of membrane permeabilisation. Macroscopic conductance experiments showed that pleurocidin did not display a pore-forming activity in neutral phosphatidylcholine/phosphatidylethanolamine (PC/PE) lipid bilayers. However, in 7:3:1 PC/PE/phosphatidylserine (PS) lipid bilayers, pleurocidin showed reproducible I/V curves at different peptide concentrations. This activity is confirmed by single-channel experiments since well-defined ion channels were obtained if the lipid mixture was containing an anionic lipid (PS). The ion channel characteristics such as-no voltage dependence, only one unitary conductance, linear relation ship current-voltage-, are not in favour of the membrane permeabilisation according to the barrel model but rather by the toroidal pore formation.     

Influence of the bilayer composition on the binding and membrane disrupting effect of Polybia-MP1, an antimicrobial mastoparan peptide with leukemic T-lymphocyte cell selectivity

This study shows that MP-1, a peptide from the venom of the Polybia paulista wasp, is more toxic to human leukemic T-lymphocytes than to human primary lymphocytes. By using model membranes and electrophysiology measurements to investigate the molecular mechanisms underlying this selective action, the porelike activity of MP-1 was identified with several bilayer compositions. The highest average conductance was found in bilayers formed by phosphatidylcholine or a mixture of phosphatidylcholine and phosphatidylserine (70:30). The presence of cholesterol or cardiolipin substantially decreases the MP-1 pore activity, suggesting that the membrane fluidity influences the mechanism of selective toxicity. The determination of partition coefficients from the anisotropy of Trp indicated higher coefficients for the anionic bilayers. The partition coefficients were found to be 1 order of magnitude smaller when the bilayers contain cholesterol or a mixture of cholesterol and sphingomyelin. The blue shift fluorescence, anisotropy values, and Stern-Volmer constants are indications of a deeper penetration of MP-1 into anionic bilayers than into zwitterionic bilayers. Our results indicate that MP-1 prefers to target leukemic cell membranes, and its toxicity is probably related to the induction of necrosis and not to DNA fragmentation. This mode of action can be interpreted considering a number of bilayer properties like fluidity, lipid charge, and domain formation. Cholesterol-containing bilayers are less fluid and less charged and have a tendency to form domains. In comparison to healthy cells, leukemic T-lymphocyte membranes are deprived of this lipid, resulting in decreased peptide binding and lower conductance. We showed that the higher content of anionic lipids increases the level of binding of the peptide to bilayers. Additionally, the absence of cholesterol resulted in enhanced pore activity. These findings may drive the selective toxicity of MP-1 to Jurkat cells.     

Asymmetry of the gramicidin channel in bilayers of asymmetric lipid composition: I. Single channel conductance

Summary Gramicidin-doped asymmetric bilayers made by the Montal-Mueller method exhibited an asymmetric current-voltage relationship. The asymmetric conductance was shown to be the product of two components, a rectifying single-channel conductance and an asymmetric voltage dependence of the reaction which leads to the conducting channel. The single-channel conductance was asymmetric in both asymmetric bilayers made of charged lipids and asymmetric bilayers made only of neutral lipids. The single-channel asymmetry decreased with increasing ion concentration. From the comparison of the singlechannel conductance in symmetric and asymmetric bilayers and the dependence of the asymmetry on the solution ion concentrations, it was concluded that (1) the rate of ion entry into the channel is dependent on the lipid composition of the membrane and is asymmetric in asymmetric bilayers; (2) the entry step is rate determining at low ion concentrations; and (3) at higher ion concentrations the rate-determining step is the translocation across the main barrier in the membrane; and this translocation appears insensitive to lipid asymmetry.     

Antibacterial peptide pleurocidin forms ion channels in planar lipid bilayers

Pleurocidin, a 25-residue α helical cationic peptide, isolated from skin mucous secretions of the winter flounder, displays a strong anti-microbial activity and appears to play a role in innate host defence. This peptide would be responsible for pore formation in the membrane of bacteria leading to lysis and therefore death. In this study, we investigated the behaviour of pleurocidin in different planar lipid bilayers to determine its mechanism of membrane permeabilisation. Macroscopic conductance experiments showed that pleurocidin did not display a pore-forming activity in neutral phosphatidylcholine/phosphatidylethanolamine (PC/PE) lipid bilayers. However, in 7:3:1 PC/PE/phosphatidylserine (PS) lipid bilayers, pleurocidin showed reproducible I/V curves at different peptide concentrations. This activity is confirmed by single-channel experiments since well-defined ion channels were obtained if the lipid mixture was containing an anionic lipid (PS). The ion channel characteristics such as—no voltage dependence, only one unitary conductance, linear relation ship current-voltage—, are not in favour of the membrane permeabilisation according to the barrel model but rather by the toroidal pore formation.     

Charge transfer in P-type ATPases investigated on planar membranes

Planar lipid bilayers, e.g., black lipid membranes (BLM) and solid supported membranes (SSM), have been employed to investigate charge movements during the reaction cycle of P-type ATPases. The BLM/SSM method allows a direct measurement of the electrical currents generated by the cation transporter following chemical activation by a substrate concentration jump. The electrical current transients provides information about the reaction mechanism of the enzyme. In particular, the BLM/SSM technique allows identification of electrogenic steps which in turn may be used to localize ion translocation during the reaction cycle of the pump. In addition, using the high time resolution of the technique, especially when rapid activation via caged ATP is employed, rate constants of electrogenic and electroneutral steps can be determined. In the present review, we will discuss the main results obtained by the BLM and SSM methods and how they have contributed to unravel the transport mechanism of P-type ATPases.     

Membrane damage by a toxin from the sea anemone Stoichactis helianthus. I. Formation of transmembrane channels in lipid bilayers.

The addition of nanomolar amounts of a toxin preparation derived from the sea anemone Stoichactis helianthus to black lipid membranes increases their electrical conductance by one million-fold. In addition, the membranes become permeable predominantly to monovalent cations. The elevated bilayer conductance is voltage-dependent, and the current-voltage curves of these bilayers display rectification as well as a region of negative resistance. The membrane activity of the toxin is proportional to the third power of its concentration, and at very low concentrations the membrane conductance increases in discrete uniform steps. These observations indicate that the mechanism of toxin action involves the formation of transmembrane channels constructed by the aggregation of protein molecules which are inserted in the bilayer. The voltage-dependent membrane conductance arises from two distinct channel characteristics: (1) the unit conductance of individual channels is dependent on the polarity of applied voltage; (2) the number of ion-conducting channels is influenced by the polarity as well as the magnitude of applied potential. It is believed that these effects are due to the influence of an electric field on the insertion of toxin molecules into the bilayer or on their subsequent association with each other to produce channels. Partial chemical characterization of the toxin material has shown that the membrane active factor is a basic protein with a molecular weight of 17,500.     

The antibacterial peptide ceratotoxin A displays alamethicin-like behavior in lipid bilayers

Ceratotoxin A (CtxA), a 36-residue alpha-helical cationic peptide isolated from the medfly Ceratitis capitata, exhibits strong antibacterial activity. To determine its mode of action against bacteria, we investigated the behavior of ceratotoxin A by incorporating it into planar lipid bilayers. Macroscopic and single channel conductance experiments showed that ceratotoxin A forms voltage-dependent ion channels in bilayers according to the barrel-stave model. The characteristics of the channel suggest that the C-terminal regions form bundles of five or six helices embedded in the membrane, such that the N-terminal moieties lie on the polar side of the lipid bilayer.