Feasibility of transferring fluorescent in situ hybridization probes to an 18S rRNA gene phylochip and mapping of signal intensities

DNA microarray technology offers the possibility to analyze microbial communities without cultivation, thus benefiting biodiversity studies. We developed a DNA phylochip to assess phytoplankton diversity and transferred 18S rRNA probes from dot blot or fluorescent in situ hybridization (FISH) analyses to a microarray format. Similar studies with 16S rRNA probes have been done determined that in order to achieve a signal on the microarray, the 16S rRNA molecule had to be fragmented, or PCR amplicons had to be <150 bp in length to minimize the formation of a secondary structure in the molecule so that the probe could bind to the target site. We found different results with the 18S rRNA molecule. Four out of 12 FISH probes exhibited false-negative signals on the microarray; eight exhibited strong but variable signals using full-length 18S RNA molecules. A systematic investigation of the probe's accessibility to the 18S rRNA gene was made using Prymenisum parvum as the target. Fourteen additional probes identical to this target covered the regions not tested with existing FISH probes. Probes with a binding site in the first 900 bp of the gene generated positive signals. Six out of nine probes binding in the last 900 bp of the gene produced no signal. Our results suggest that although secondary structure affected probe binding, the effect is not the same for the 18S rRNA gene and the 16S rRNA gene. For the 16S rRNA gene, the secondary structure is stronger in the first half of the molecule, whereas in the 18S rRNA gene, the last half of the molecule is critical. Probe-binding sites within 18S rRNA gene molecules are important for the probe design for DNA phylochips because signal intensity appears to be correlated with the secondary structure at the binding site in this molecule. If probes are designed from the first half of the 18S rRNA molecule, then full-length 18S rRNA molecules can be used in the hybridization on the chip, avoiding the fragmentation and the necessity for the short PCR amplicons that are associated with using the 16S rRNA molecule. Thus, the 18S rRNA molecule is a more attractive molecule for use in environmental studies where some level of quantification is desired. Target size was a minor problem, whereas for 16S rRNA molecules target size rather than probe site was important.     

Position Dependent Plasmonic Interaction Between a Single Nanoparticle and a Nanohole Array

The interaction of surface plasmons supported on a nanohole array and a single nanoparticle affixed to an atomic force microscopy (AFM) probe was studied for optimizing gap mode enhancement of the plasmonic field. Scanning probe microscopy controlled the AFM probe position, and the location specific interaction of the single nanoparticle (SNP) probe-nanohole array surface plasmons, was measured by darkfield spectroscopy. Raster-scanned darkfield imaging of the surface plasmons on the nanohole array is demonstrated, as well as image formation from measuring the SNP interaction at various (X, Y) locations relative to the nanohole. Coupling of the nanoparticle to the nanohole array exhibited maximal coupling when the SNP resided within a nanohole, resulting in a maximum SPR wavelength shift of 17 nm and an increase in scatter intensity of 137×. This technique may be expanded to mapping nanostructure coupling across three dimensions to determine optimal coupling conditions for applications in biosensing and surface enhanced spectroscopy. This contribution presents the first empirical observations of scanning probe microscopy (SPM) controlled gap mode enhancement of more complex nanostructures, a method for positioning optimization prior to sensing applications and experimental evidence for optimal lateral SNP-nanohole array positioning.     

Multiplexed single nucleotide polymorphism genotyping by oligonucleotide ligation and flow cytometry

BACKGROUND: We have developed a rapid, high throughput method for single nucleotide polymorphism (SNP) genotyping that employs an oligonucleotide ligation assay (OLA) and flow cytometric analysis of fluorescent microspheres. METHODS: A fluoresceinated oligonucleotide reporter sequence is added to a "capture" probe by OLA. Capture probes are designed to hybridize both to genomic "targets" amplified by polymerase chain reaction and to a separate complementary DNA sequence that has been coupled to a microsphere. These sequences on the capture probes are called "ZipCodes". The OLA-modified capture probes are hybridized to ZipCode complement-coupled microspheres. The use of microspheres with different ratios of red and orange fluorescence makes a multiplexed format possible where many SNPs may be analyzed in a single tube. Flow cytometric analysis of the microspheres simultaneously identifies both the microsphere type and the fluorescent green signal associated with the SNP genotype. RESULTS: Application of this methodology is demonstrated by the multiplexed genotyping of seven CEPH DNA samples for nine SNP markers located near the ApoE locus on chromosome 19. The microsphere-based SNP analysis agreed with genotyping by sequencing in all cases. CONCLUSIONS: Multiplexed SNP genotyping by OLA with flow cytometric analysis of fluorescent microspheres is an accurate and rapid method for the analysis of SNPs.     

Analysis of crucial factors resulting in microarray hybridization failure

The factors that affect the formation and stability of DNA/DNA duplexes are complicated and still mostly unknown. In this study attempts were made to look for the crucial factor affecting hybridization failure in DNA microarray assays. A comprehensive range of factors were investigated simultaneously using a 25-mer oligonucleotide Potyvirus microarray. These included steric hindrance, direct/indirect labelling types, distance of a probe to the fluorescent labelling end, target (the DNA fragment used to hybridize with microarray probes) strand types either single strand or double strand, probes without mismatch and with different numbers of mismatch nucleotides (up to 36%) and different mismatch locations (5' end, centre and 3' end), probe GC content and T(m), secondary structures of probes and targets, different target lengths (0.277 kb to ~1.3 kb) and concentrations (0.1-30 nM). The results showed that whilst most of these known factors were unlikely to be the main causes of failed hybridization, there was strong evidence suggesting that the viral amplicon target structure is the most crucial factor. However, computing predicted target secondary structures by Mfold showed no correlation with the hybridization results. One explanation is that the predicted target secondary structures are different from the real structures. Here we postulate that the real target structure might be a combination of secondary structures resulting in a three-dimensional structure from exposure to three types of sub-structures: (1) a completely exposed linear structure to allow probes access for the successful hybridization and showing strong fluorescent signals; (2) a partially exposed structure to allow unstable binding and showing weak fluorescent signals; (3) a closed structure resulting in failed hybridization. These results are very important for microarray based studies as they not only provide an explanation for some current controversial results, but also provide potential resolution for the future studies. Due to the lack of available software for predicting the true target structure, development of microarrays should conduct an initial oligonucleotide probe selection procedure and those probes with capacity to hybridize with the target should be considered for the microarray development.     

Theoretical aspects of genomic variation screening using DNA microarrays

We present a theoretical model for typical microarray-based single nucleotide polymorphism (SNP) assay of small genomic DNA amount. We derived the adsorption isotherm expressing the on-array hybridization efficiency in terms of genomic target sequence and concentration, oligonucleotide probe sequence and surface density, hybridization buffer, and temperature. This isotherm correctly describes the surface probe density effects, the sensitivity peak, and the melting temperature depression, and is in accord with published experiments. We discuss optimization of parallel SNP genotyping. Our estimates show that SNP detection at a single temperature in aqueous hybridization buffer is restricted by DNA regions that differ by less than 20% in GC content. We predict that the variety of genotyped SNPs could be substantially extended using an assay design with high probe density and a large fraction of probes hybridized.     

Effect of unlabeled helper probes on detection of an RNA target by bead-based sandwich hybridization

Unlabeled helper oligonucleotides assisting a bead-based sandwich hybridization assay were tested for the optimal placement of the capture and detection probes. The target used was a full-length in vitro synthesized mRNA molecule. Helper probes complementary to regions adjacent to the binding site of the 5' end attached capture probe were found much more effective than helper probes targeting positions adjacent to the detection probe binding site. The difference is believed to be caused by a disruption of the RNA secondary structure in the area where the capture probe binds, thereby reducing structural interference from the bead. The use of additional helpers showed an additive effect. Using helpers at both sides of the capture and detection probes showed a 15- to 40-fold increase in hybridization efficiency depending on the target, thereby increasing the sensitivity of the hybridization assays. Using an electrical chip linked to the detection probe for the detection of p-aminophenol, which is produced by alkaline phosphatase, a detection limit of 2 x 10(-13) M mRNA molecules was reached without the use of a nucleic acid amplification step.     

Secondary structure effects on DNA hybridization kinetics: a solution versus surface comparison

The hybridization kinetics for a series of designed 25mer probe–target pairs having varying degrees of secondary structure have been measured by UV absorbance and surface plasmon resonance (SPR) spectroscopy in solution and on the surface, respectively. Kinetic rate constants derived from the resultant data decrease with increasing probe and target secondary structure similarly in both solution and surface environments. Specifically, addition of three intramolecular base pairs in the probe and target structure slow hybridization by a factor of two. For individual strands containing four or more intramolecular base pairs, hybridization cannot be described by a traditional two-state model in solution-phase nor on the surface. Surface hybridization rates are also 20- to 40-fold slower than solution-phase rates for identical sequences and conditions. These quantitative findings may have implications for the design of better biosensors, particularly those using probes with deliberate secondary structure.     

Mismatch and G-Stack Modulated Probe Signals on SNP Microarrays

Background

Single nucleotide polymorphism (SNP) arrays are important tools widely used for genotyping and copy number estimation. This technology utilizes the specific affinity of fragmented DNA for binding to surface-attached oligonucleotide DNA probes. We analyze the variability of the probe signals of Affymetrix GeneChip SNP arrays as a function of the probe sequence to identify relevant sequence motifs which potentially cause systematic biases of genotyping and copy number estimates.

Methodology/Principal Findings

The probe design of GeneChip SNP arrays enables us to disentangle different sources of intensity modulations such as the number of mismatches per duplex, matched and mismatched base pairings including nearest and next-nearest neighbors and their position along the probe sequence. The effect of probe sequence was estimated in terms of triple-motifs with central matches and mismatches which include all 256 combinations of possible base pairings. The probe/target interactions on the chip can be decomposed into nearest neighbor contributions which correlate well with free energy terms of DNA/DNA-interactions in solution. The effect of mismatches is about twice as large as that of canonical pairings. Runs of guanines (G) and the particular type of mismatched pairings formed in cross-allelic probe/target duplexes constitute sources of systematic biases of the probe signals with consequences for genotyping and copy number estimates. The poly-G effect seems to be related to the crowded arrangement of probes which facilitates complex formation of neighboring probes with at minimum three adjacent G''s in their sequence.

Conclusions

The applied method of “triple-averaging” represents a model-free approach to estimate the mean intensity contributions of different sequence motifs which can be applied in calibration algorithms to correct signal values for sequence effects. Rules for appropriate sequence corrections are suggested.     

MACGT: multi-dimensional automated clustering genotyping tool for analysis of microarray-based mini-sequencing data

SUMMARY: Multi-dimensional Automated Clustering Genotyping Tool (MACGT) is a Java application that clusters complex multi-dimensional vector data derived from single nucleotide polymorphism (SNP) genotyping experiments using mini-sequencing based microarray chemistries such as arrayed primer extension (APEX). Spot intensity output files from microarray experiments across multiple samples are imported into MACGT. The datasets can include four channels of intensity data for each spot, replica spots for each SNP probe and multiple probe types (APEX and allele-specific APEX probes) on both DNA strands for each SNP. MACGT automatically clusters these multi-dimensionality datasets for each SNP across multiple samples. Incorporation of additional array datasets from known samples that have previously validated SNP genotype calls allows unknown samples to be automatically assigned a genotype based on the clustering, along with numerical measures of confidence for each genotype call. Calling accuracy by MACGT exceeds 98% when applied to genotyping data from APEX microarrays, and can be increased to >99.5% by applying thresholds to the confidence measures.     

Hybridization modeling of oligonucleotide SNP arrays for accurate DNA copy number estimation

Affymetrix SNP arrays have been widely used for single-nucleotide polymorphism (SNP) genotype calling and DNA copy number variation inference. Although numerous methods have achieved high accuracy in these fields, most studies have paid little attention to the modeling of hybridization of probes to off-target allele sequences, which can affect the accuracy greatly. In this study, we address this issue and demonstrate that hybridization with mismatch nucleotides (HWMMN) occurs in all SNP probe-sets and has a critical effect on the estimation of allelic concentrations (ACs). We study sequence binding through binding free energy and then binding affinity, and develop a probe intensity composite representation (PICR) model. The PICR model allows the estimation of ACs at a given SNP through statistical regression. Furthermore, we demonstrate with cell-line data of known true copy numbers that the PICR model can achieve reasonable accuracy in copy number estimation at a single SNP locus, by using the ratio of the estimated AC of each sample to that of the reference sample, and can reveal subtle genotype structure of SNPs at abnormal loci. We also demonstrate with HapMap data that the PICR model yields accurate SNP genotype calls consistently across samples, laboratories and even across array platforms.     

Conversion of array‐based single nucleotide polymorphic markers for use in targeted genotyping by sequencing in hexaploid wheat (Triticum aestivum)

Wheat breeders and academics alike use single nucleotide polymorphisms (SNP s) as molecular markers to characterize regions of interest within the hexaploid wheat genome. A number of SNP ‐based genotyping platforms are available, and their utility depends upon factors such as the available technologies, number of data points required, budgets and the technical expertise required. Unfortunately, markers can rarely be exchanged between existing and newly developed platforms, meaning that previously generated data cannot be compared, or combined, with more recently generated data sets. We predict that genotyping by sequencing will become the predominant genotyping technology within the next 5–10 years. With this in mind, to ensure that data generated from current genotyping platforms continues to be of use, we have designed and utilized SNP ‐based capture probes from several thousand existing and publicly available probes from Axiom® and KASP ? genotyping platforms. We have validated our capture probes in a targeted genotyping by sequencing protocol using 31 previously genotyped UK elite hexaploid wheat accessions. Data comparisons between targeted genotyping by sequencing, Axiom® array genotyping and KASP ? genotyping assays, identified a set of 3256 probes which reliably bring together targeted genotyping by sequencing data with the previously available marker data set. As such, these probes are likely to be of considerable value to the wheat community. The probe details, full probe sequences and a custom built analysis pipeline may be freely downloaded from the CerealsDB website (http://www.cerealsdb.uk.net/cerealgenomics/CerealsDB /sequence_capture.php).     

Investigation of parent-of-origin effects induced by fenofibrate treatment on triglycerides levels

Background

Genome-wide association studies performed on triglycerides (TGs) have not accounted for epigenetic mechanisms that may partially explain trait heritability.

Results

Parent-of-origin (POO) effect association analyses using an agnostic approach or a candidate approach were performed for pretreatment TG levels, posttreatment TG levels, and pre- and posttreatment TG-level differences in the real GAW20 family data set. We detected 22 genetic variants with suggestive POO effects with at least 1 phenotype (P ≤ 10^− 5). We evaluated the association of these 22 significant genetic variants showing POO effects with close DNA methylation probes associated with TGs. A total of 18 DNA methylation probes located in the vicinity of the 22 SNPs were associated with at least 1 phenotype and 6 SNP-probe pairs were associated with DNA methylation probes at the nominal level of P < 0.05, among which 1 pair presented evidence of POO effect. Our analyses identified a paternal effect of SNP rs301621 on the difference between pre- and posttreatment TG levels (P = 1.2 × 10^− 5). This same SNP showed evidence for a maternal effect on methylation levels of a nearby probe (cg10206250; P = 0.01). Using a causal inference test we established that the observed POO effect of rs301621 was not mediated by DNA methylation at cg10206250.

Conclusions

We performed POO effect association analyses of SNPs with TGs, as well as association analyses of SNPs with DNA methylation probes. These analyses, which were followed by a causal inference test, established that the paternal effect at the SNP rs301621 is induced by treatment and is not mediated by methylation level at cg10206250.

     

Efficient detection of secondary structure folded nucleic acids related to Alzheimer's disease based on junction probes

Single stranded DNA often forms stable secondary structures under physiological conditions. These DNA secondary structures play important physiological roles. However, the analysis of such secondary structure folded DNA is often complicated because of its high thermodynamic stability and slow hybridization kinetics. In this article, we demonstrate that Y-shaped junction probes could be used for rapid and highly efficient detection of secondary structure folded DNA. Our approach contained a molecular beacon (MB) probe and an assistant probe. In the absence of target, the MB probe failed to hybridize with the assistant probe. Whereas, the MB probe and the assistant probe could cooperatively unwind the secondary structure folded DNA target to form a ternary Y-shaped junction structure. In this condition, the MB probe was also opened, resulting in separating the fluorophores from the quenching moiety and emitting the fluorescence signal. This approach allowed for the highly sensitive detection of secondary structure folded DNA target, such as a tau specific DNA fragment related to Alzheimer's disease in this case. Additionally, this approach showed strong SNPs identifying capability. Furthermore, it was noteworthy that this newly proposed approach was capable of detecting secondary structure folded DNA target in cell lysate samples.     

RTPrimerDB: the real-time PCR primer and probe database

The real-time polymerase chain reaction (PCR) methodology has become increasingly popular for nucleic acids detection and/or quantification. As primer/probe design and experimental evaluation is time-consuming, we developed a public database application for the storage and retrieval of validated real-time PCR primer and probe sequence records. The integrity and accuracy of the data are maintained by linking to and querying other reference databases. RTPrimerDB provides free public access through the Web to perform queries and submit user based information. Primer/probe records can be searched for by official gene symbol, nucleotide sequence, type of application, detection chemistry, LocusLink or Single Nucleotide Polymorphism (SNP) identifier, and submitter's name. Each record is directly linked to LocusLink, dbSNP and/or PubMed to retrieve additional information on the gene/SNP for which the primers/probes are designed. Currently, the database contains primer/probe records for human, mouse, rat, fruit fly and zebrafish, and all current detection chemistries such as intercalating dyes (SYBR Green I), hydrolysis probes (Taqman), adjacent hybridizations probes and molecular beacons. Real-time PCR primer/probe records are available at http://www.realtimeprimerdatabase.ht.st.     

Synthesis of highly selective fluorescent peptide probes for metal ions: tuning selective metal monitoring with secondary structure

Metal selective fluorescent peptide probes (dansyl-Cys-X-Gly-His-X-Gly-Glu-NH2, X = Pro or Gly) were developed by synthesizing peptides containing His, Cys, and Glu residues with Pro-Gly sequence to stabilize a turn structure and Gly-Gly sequence to adopt a random coil. The probe containing two Gly-Gly sequences exhibited marked selectivity only for Cu2+ over 13 metal ions including competitive transition and Group I and II metal ions under physiological buffer condition. In contrast, the probe containing double Pro-Gly sequences showed high selectivity for Zn2+. The peptide probe containing one Pro-Gly sequence exhibited selectivity for Zn2+ and Cu2+. CD spectra indicated that the secondary structure of the probes played an important role in the selective metal monitoring and a pre-organized secondary structure is not required for the selective detection of Cu2+ ion, but is required for the detection of Zn2+. We investigated and characterized the binding affinity, binding stoichiometry, reversibility, and pH sensitivity of the peptide probes.     

Nonradioactive nucleic acid detection by enhanced chemiluminescence using probes directly labeled with horseradish peroxidase

The use of nucleic acid probes directly labeled with horseradish peroxidase for detection of single copy sequences on Southern blots of human genomic DNA by enhanced chemiluminescence is described. Of the target sequences, 6 x 10(5) molecules (1 amol) have been detected on blue sensitive film using exposures of up to 60 min and probes of 0.3-5.1 kb. The chemiluminescent signal quantified using a cooled charge coupled device (CCD) camera is proportional to probe length for DNA probes in the range 50-3571 bases. The enzyme has no significant effect on the stability of a DNA/DNA hybrid formed with a 3571-base probe and target as determined by increasing the stringency of posthybridization washes by decreasing the concentration of a monovalent cation (NaCl) and by a Tm analysis. The kinetics of DNA hybridization have been analyzed by a cooled CCD camera to provide quantitative data. Ten nanograms per milliliter of probe may be used for an overnight hybridization. Southern blots can be reprobed using a DNA probe for the same or a different sequence without the necessity of stripping off the previously bound probe.