Helix-helix interactions in membrane proteins: coarse-grained simulations of glycophorin a helix dimerization

Oligomerization of transmembrane (TM) helices is a key stage in the folding of membrane proteins. Glycophorin A (GpA) is a well-documented test system for this process. Coarse-grained molecular dynamics (CG-MD) allows us to simulate the self-assembly of TM helices into dimers, for both wild-type (WT) and mutant GpA sequences. For the WT sequences, dimers formed rapidly and remained stable in all simulations. The resultant dimers exhibited right-handed crossing and the same interhelix contacts as in NMR structures. Simulations of disruptive mutants revealed the dimers were less stable, with values of DeltaDelta G dimerization consistent with experimental data. The dimers of disruptive mutants were distorted relative to the WT and showed left-handed crossing of their helices. CG-MD can therefore be used to explore the interactions of TM helices, an important stage in the folding of membrane proteins. In particular, CG-MD has been shown to be sensitive enough to detect disruptions introduced by mutation. Future refinement of such models via atomistic simulations will enable a multiscale approach to predict the folding of membrane proteins.     

Molecular packing and packing defects in helical membrane proteins

The packing of helices spanning lipid bilayers is crucial for the stability and function of alpha-helical membrane proteins. Using a modified Voronoi procedure, we calculated packing densities for helix-helix contacts in membrane spanning domains. Our results show that the transmembrane helices of protein channels and transporters are significantly more loosely packed compared with helices in globular proteins. The observed packing deficiencies of these membrane proteins are also reflected by a higher amount of cavities at functionally important sites. The cavities positioned along the gated pores of membrane channels and transporters are noticeably lined by polar amino acids that should be exposed to the aqueous medium when the protein is in the open state. In contrast, nonpolar amino acids surround the cavities in those protein regions where large rearrangements are supposed to take place, as near the hinge regions of transporters or at restriction sites of protein channels. We presume that the observed deficiencies of helix-helix packing are essential for the helical mobility that sustains the function of many membrane protein channels and transporters.     

Helix-helix interactions in lipid bilayers.

Using a continuum model, we calculated the electrostatic interaction free energy between two alpha-helices in three environments: the aqueous phase, a low dielectric alkane phase, and a simple representation of a lipid bilayer. As was found in previous work, helix-helix interactions in the aqueous phase are quite weak, because of solvent screening, and slightly repulsive, because of desolvation effects that accompany helix assembly. In contrast, the interactions can be quite strong in a hypothetical alkane phase because desolvation effects are essentially nonexistent and because helix-helix interactions are not well screened. In this type of environment, the antiparallel helix orientation is strongly favored over the parallel orientation. In previous work we found that the free energy penalty associated with burying helix termini in a bilayer is quite high, which is why the termini tend to protrude into the solvent. Under these conditions the electrostatic interaction is strongly screened by solvent; indeed, it is sufficient for the termini to protrude a few angstroms from the two surfaces of the bilayer for their interaction to diminish almost completely. The effect is consistent with the classical model of the helix dipole in which the dipole moment is represented by point charges located at either terminus. Our results suggest, in agreement with previous models, that there is no significant nonspecific driving force for helix aggregation and, hence, that membrane protein folding must be driven by specific interactions such as close packing and salt-bridge and hydrogen bond formation.     

Analysis of the role of interfacial tryptophan residues in controlling the topology of membrane proteins

Tryptophans have a high affinity for the membrane-water interface and have been suggested to play a role in determining the topology of membrane proteins. We investigated this potential role experimentally, using mutants of the single-spanning Pf3 coat protein, whose transmembrane topologies are sensitive to small changes in amino acid sequence. Mutants were constructed with varying numbers of tryptophans flanking the transmembrane region and translocation was assessed by an in vitro translation/translocation system. Translocation into Escherichia coli inner membrane vesicles could take place under a variety of experimental conditions, with co- or posttranslational assays and proton motive force-dependent or -independent mutants. It was found that translocation can even occur in pure lipid vesicles, under which conditions the tryptophans must directly interact with the lipids. However, under all these conditions tryptophans neither inhibited nor stimulated translocation, demonstrating that they do not affect topology and suggesting that this may be universal for tryptophans in membrane proteins. In contrast, we could demonstrate that lysines clearly prefer to stay on the cis-side of the membrane, in agreement with the positive-inside rule. A statistical analysis focusing on interfacially localized residues showed that in single-spanning membrane proteins lysines are indeed located on the inside, while tryptophans are preferentially localized at the outer interface. Since our experimental results show that the latter is not due to a topology-determining role, we propose instead that tryptophans fulfill a functional role as interfacially anchoring residues on the trans-side of the membrane.     

Co-evolving residues in membrane proteins

MOTIVATION: The analysis of co-evolving residues has been exhaustively evaluated for the prediction of intramolecular amino acid contacts in soluble proteins. Although a variety of different methods for the detection of these co-evolving residues have been developed, the fraction of correctly predicted contacts remained insufficient for their reliable application in the construction of structural models. Membrane proteins, which constitute between one-fourth and one-third of all proteins in an organism, were only considered in few individual case studies. RESULTS: We present the first general study of correlated mutations in alpha-helical membrane proteins. Using seven different prediction algorithms, we extracted co-evolving residues for 14 membrane proteins having a solved 3D structure. On average, distances between correlated pairs of residues lying on different transmembrane segments were found to be significantly smaller compared to a random prediction. Covariation of residues was frequently found in direct sequence neighborhood to helix-helix contacts. Based on the results obtained from individual prediction methods, we constructed a consensus prediction for every protein in the dataset that combines obtained correlations from different prediction algorithms and simultaneously removes likely false positives. Using this consensus prediction, 53% of all predicted residue pairs were found within one helix turn of an observed helix-helix contact. Based on the combination of co-evolving residues detected with the four best prediction algorithms, interacting helices could be predicted with a specificity of 83% and sensitivity of 42%. AVAILABILITY: http://webclu.bio.wzw.tum.de/helixcorr/     

Helical packing patterns in membrane and soluble proteins

This article presents the results of a detailed analysis of helix-helix interactions in membrane and soluble proteins. A data set of interacting pairs of helices in membrane proteins of known structure was constructed and a structure alignment algorithm was used to identify pairs of helices in soluble proteins that superimpose well with pairs of helices in the membrane-protein data set. Most helix pairs in membrane proteins are found to have a significant number of structural homologs in soluble proteins, although in some cases, primarily involving irregular helices, no close homologs exist. An analysis of geometric relationships between interacting helices in the two sets of proteins identifies some differences in the distributions of helix length, interfacial area, packing angle, and distance between the polypeptide backbones. However, a subset of soluble-protein helix pairs that are close structural homologs to membrane-protein helix pairs exhibits distributions that mirror those observed in membrane proteins. The larger average interface size and smaller distance of closest approach seen for helices in membrane proteins appears due in part to a relative enrichment of alanines and glycines, particularly as components of the AxxxA and GxxxG motifs. It is argued that membrane helices are not on average more tightly packed than helices in soluble proteins; they are simply able to approach each other more closely. This enables them to interact over longer distances, which may in turn facilitate their remaining in contact over much of the width of the lipid bilayer. The close structural similarity seen between some pairs of helices in membrane and soluble proteins suggests that packing patterns observed in soluble proteins may be useful in the modeling of membrane proteins. Moreover, there do not appear to be fundamental differences between the magnitude of the forces that drive helix packing in membrane and soluble proteins, suggesting that strategies to make membrane proteins more soluble by mutating surface residues are likely to encounter success, at least in some cases.     

Structural analysis of residues involving cation-pi interactions in different folding types of membrane proteins

Cation-pi interactions play an important role to the stability of protein structures. In our earlier work, we have analyzed the influence and energetic contribution of cation-pi interactions in three-dimensional structures of membrane proteins. In this work, we investigate the characteristic features of residues that are involved in cation-pi interactions. We have computed several parameters, such as surrounding hydrophobicity, number of long-range contacts, conservation score and normalized B-factor for all these residues and identified their location, whether in the membrane or at surface. We found that the cation-pi interactions are mainly formed by long-range interactions. The cationic residues involved in cation-pi interactions have higher surrounding hydrophobicity than their average values in the whole dataset and an opposite trend is observed for aromatic residues. In transmembrane helical proteins, except Phe, all other residues that are responsible for cation-pi interactions are highly conserved with other related protein sequences whereas in transmembrane strand proteins, an appreciable conservation is observed only for Arg. The analysis on the flexibility of residues reveals that the cation-pi interaction forming residues are more stable than other residues. The results obtained in the present study would be helpful to understand the role of cation-pi interactions in the structure and folding of membrane proteins.     

The role of packing interactions in stabilizing folded proteins.

In order to investigate the role of nonpolar side chains in determining protein stability, we have carried out a molecular dynamics simulation study of the thermodynamics of interconverting isoleucine and valine side chains in the core of ribonuclease T1. The free energy change in the unfolded state, which we take to be fully solvated, was small and agrees qualitatively with experimental studies of alkane solvation. In the two Ile----Val mutations studied, the protein was able to relax around the smaller side chains, while in the case of the two Val----Ile mutations, the ability of the core to accommodate the extra methylene group depended on where the mutation took place. We argue that the experimentally observed decrease in stability for mutating isoleucine into valine results from a loss of favorable packing interactions of the side chain in the folded form of the protein. This supports the view that packing interactions in the folded state are an important contributor to the overall stability of the folded protein and that the core of the native protein is packed efficiently and almost completely.     

Hydrophobic helical hairpins: design and packing interactions in membrane environments

Helix-helix interactions within membranes are dominated by van der Waals packing motifs and side chain-side chain hydrogen bond formation, which act in tandem to determine the residues that comprise the interface between two given helices. To explore in a systematic manner the tertiary contacts between transmembrane helices, we have designed and expressed in Escherichia coli highly hydrophobic helix-loop-helix constructs of prototypic sequence K(1)KKKKKKFAIAIAIIAWAX(19)AIIAIAIAIKSPGSKIAIAIAIIAZ(44)AWAIIAIAIAFKKKKKKK(62), where "small" (Ala) and "large" (Ile) residues were used to maximize the tertiary contact area. Evidence that the two transmembrane (TM) segments in the AI construct contain an interface conducive for folding into a hairpin structure was obtained from the results that (i) the single TM AI(pep) peptide derived from the AI hairpin forms SDS-resistant dimers on PAGE gels and (ii) the corresponding sequence forms a strong dimer when examined in vivo in TOXCAT assays. Site-directed mutagenesis of AI hairpins was carried out to incorporate each of the 20 commonly occurring amino acids at X positions. Analysis on Western blots using an oligomerization assay in 12% NuPage-sodium dodecyl sulfate (SDS) indicated that mutants with X = E, D, Q, R, N, H, and K largely formed SDS-resistant dimers-which likely correspond to H-bonded four-helix bundles-while all the others (e.g., X = F, W, L, I, M, V, C, Y, A, T, S, G, and P) remained monomeric. Systematic studies of X/Z double mutants indicated that formation of hairpin dimers is the result of the disruption of stabilizing interactions between the antiparallel helices within the AI construct. The overall results suggest that, in situations where hydrophobic van der Waals packing energy between helices is sufficient to prevent significant rotation about the major axes of interacting helices, intrahairpin side chain-side chain H-bond formation will occur mainly when pairs of polar residues are interfacially located and proximal. Knowledge of the relative contributions of these forces should be of value, for example, in clarifying the context--and the structural consequences--of disease-related mutations.     

Hydrogen-bonding and packing features of membrane proteins: functional implications

The recent structural elucidation of about one dozen channels (in which we include transporters) has provided further evidence that these membrane proteins typically undergo large movements during their function. However, it is still not well understood how these proteins achieve the necessary trade-off between stability and mobility. To identify specific structural properties of channels, we compared the helix-packing and hydrogen-bonding patterns of channels with those of membrane coils; the latter is a class of membrane proteins whose structures are expected to be more rigid. We describe in detail how in channels, helix pairs are usually arranged in packing motifs with large crossing angles (|τ| ≈ 40°), where the (small) side chains point away from the packing core and the backbones of the two helices are in close contact. We found that this contributes to a significant enrichment of Cα-H…O bonds and to a packing geometry where right-handed parallel (τ = −40° ± 10°) and antiparallel (τ = +140° ± 25°) arrangements are equally preferred. By sharp contrast, the interdigitation and hydrogen bonding of side chains in helix pairs of membrane coils results in narrowly distributed left-handed antiparallel arrangements with crossing angles τ = −160° ± 10° (|τ| ≈ 20°). In addition, we show that these different helix-packing modes of the two types of membrane proteins correspond to specific hydrogen-bonding patterns. In particular, in channels, three times as many of the hydrogen-bonded helix pairs are found in parallel right-handed motifs than are non-hydrogen-bonded helix pairs. Finally, we discuss how the presence of weak hydrogen bonds, water-containing cavities, and right-handed crossing angles may facilitate the required conformational flexibility between helix pairs of channels while maintaining sufficient structural stability.     

Helix-helix interactions and their impact on protein motifs and assemblies

Protein secondary structure elements are arranged in distinct structural motifs such as four-α-helix bundle, 8α/8β TIM-barrel, Rossmann dinucleotide binding fold, assembly of a helical rod. Each structural motif is characterized by a particular type of helix-helix interactions. A unique pattern of contacts is formed by interacting helices of the structural motif. In each type of fold, edges of the helix surface, which participate in the formation of helix-helix contacts with preceding and following helices, differ. This work shows that circular arrangements of the four, eight, and sixteen α-helices, which are found in the four-α-helical motif, TIM-barrel 8α/8β fold, and helical rod of 16.3¯ helices per turn correspondingly, can be associated with the mutual positioning of the edges of the helix surfaces. Edges (i, i+1)−(i+1, i+2) of the helix surface are central for the interhelical contacts in a four-α-helix bundle. Edges (i, i+1)−(i+2, i+3) are involved in the assembly of four-α-helix subunits into helical rod of a tobacco mosaic virus and a three-helix fragment of a Rossmann fold. In 8α/8β TIM-barrel fold, edges (i, i+1)−(i+5, i+6) are involved in the octagon arrangement. Approximation of a cross section of each motif with a polygon (n-gon, n=4, 8, 16) shows that a good correlation exists between polygon interior angles and angles formed by the edges of helix surfaces.     

Skip residues and charge interactions in myosin II coiled-coils: implications for molecular packing

Molecular packing of myosin II coiled-coil rods into myosin filaments and the role of skip residues in the heptad sequence have been investigated. Sequence comparison of rods from skeletal, smooth and non-muscle myosin II shows that different myosin II subtypes have significantly different charge distributions. Analysis of the ionic interactions between adjacent rods with changing molecular overlap relates the different patterns of charge to the different structures of skeletal and smooth muscle myosin II filaments. It is shown in the case of skeletal muscle myosin II that the skip residues have a critical role in keeping these unique patterns of charge in perfect phase. Only one of the previously suggested packing models for myosin II filaments, with a slight modification, is supported, since it satisfies all the sequence-predicted axial shifts between adjacent rods. Such analysis significantly advances understanding of myosin filament assembly properties and will help to provide a basis for the proper understanding of myosin-associated diseases.     

Higher-order interhelical spatial interactions in membrane proteins

Higher-order interactions are important for protein folding and assembly. We introduce the concept of interhelical three-body interactions as derived from Delaunay triangulation and alpha shapes of protein structures. In addition to glycophorin A, where triplets are strongly correlated with protein stability, we found that tight interhelical triplet interactions exist extensively in other membrane proteins, where many types of triplets occur far more frequently than in soluble proteins. We developed a probabilistic model for estimating the value of membrane helical interaction triplet (MHIT) propensity. Because the number of known structures of membrane proteins is limited, we developed a bootstrap method for determining the 95% confidence intervals of estimated MHIT values. We identified triplets that have high propensity for interhelical interactions and are unique to membrane proteins, e.g. AGF, AGG, GLL, GFF and others. A significant fraction (32%) of triplet types contains triplets that may be involved in interhelical hydrogen bond interactions, suggesting the prevalent and important roles of H-bond in the assembly of TM helices. There are several well-defined spatial conformations for triplet interactions on helices with similar parallel or antiparallel orientations and with similar right-handed or left-handed crossing angles. Often, they contain small residues and correspond to the regions of the closest contact between helices. Sequence motifs such as GG4 and AG4 can be part of the three-body interactions that have similar conformations, which in turn can be part of a higher-order cooperative four residue spatial motif observed in helical pairs from different proteins. In many cases, spatial motifs such as serine zipper and polar clamp are part of triplet interactions. On the basis of the analysis of the archaeal rhodopsin family of proteins, tightly packed triplet interactions can be achieved with several different choices of amino acid residues.     

The functions of tryptophan residues in membrane proteins.

Membrane proteins have a significantly higher Trp content than do soluble proteins. This is especially true for the M and L subunits of the photosynthetic reaction center from purple bacteria. The Trp residues are not uniformly distributed through the membrane but are concentrated at the periplasmic side of the complex. In addition, Trp residues are not randomly aligned. Within the protein subunits, many form hydrogen bonds with carbonyl oxygens of the main chain, thereby stabilizing the protein. On the surface of the molecule, they are correctly positioned to form hydrogen bonds with the lipid head groups while their hydrophobic rings are immersed in the lipid part of the bilayer. These observations suggest that Trp residues are involved in the translocation of protein through the membrane and that following translocation, Trp residues serve as anchors on the periplasmic side of the membrane.     

Curvature-mediated interactions between membrane proteins.

Membrane proteins can deform the lipid bilayer in which they are embedded. If the bilayer is treated as an elastic medium, then these deformations will generate elastic interactions between the proteins. The interaction between a single pair is repulsive. However, for three or more proteins, we show that there are nonpairwise forces whose magnitude is similar to the pairwise forces. When there are five or more proteins, we show that the nonpairwise forces permit the existence of stable protein aggregates, despite their pairwise repulsions.     

Reversible - through calmodulin - electrostatic interactions between basic residues on proteins and acidic lipids in the plasma membrane

The inner leaflet of a typical mammalian plasma membrane contains 20-30% univalent PS (phosphatidylserine) and 1% multivalent PtdIns(4,5)P(2). Numerous proteins have clusters of basic (or basic/hydrophobic) residues that bind to these acidic lipids. The intracellular effector CaM (calmodulin) can reverse this binding on a wide variety of proteins, including MARCKS (myristoylated alanine-rich C kinase substrate), GAP43 (growth-associated protein 43, also known as neuromodulin), gravin, GRK5 (G-protein-coupled receptor kinase 5), the NMDA (N-methyl-D-aspartate) receptor and the ErbB family. We used the first principles of physics, incorporating atomic models and the Poisson-Boltzmann equation, to describe how the basic effector domain of MARCKS binds electrostatically to acidic lipids on the plasma membrane. The theoretical calculations show the basic cluster produces a local positive electrostatic potential that should laterally sequester PtdIns(4,5)P(2), even when univalent acidic lipids are present at a physiologically relevant 100-fold excess; four independent experimental measurements confirm this prediction. Ca(2+)/CaM binds with high affinity (K(d) approximately 10nM) to this domain and releases the PtdIns(4,5)P(2). MARCKS, a major PKC (protein kinase C) substrate, is present at concentrations comparable with those of PtdIns(4,5)P(2) (approx. 10 microM) in many cell types. Thus MARCKS can act as a reversible PtdIns(4,5)P(2) buffer, binding PtdIns(4,5)P(2) in a quiescent cell, and releasing it locally when the intracellular Ca(2+) concentration increases. This reversible sequestration is important because PtdIns(4,5)P(2) plays many roles in cell biology. Less is known about the role of CaM-mediated reversible membrane binding of basic/hydrophobic clusters for the other proteins.     

Comparison of helix interactions in membrane and soluble alpha-bundle proteins

Helix-helix interactions are important for the folding, stability, and function of membrane proteins. Here, two independent and complementary methods are used to investigate the nature and distribution of amino acids that mediate helix-helix interactions in membrane and soluble alpha-bundle proteins. The first method characterizes the packing density of individual amino acids in helical proteins based on the van der Waals surface area occluded by surrounding atoms. We have recently used this method to show that transmembrane helices pack more tightly, on average, than helices in soluble proteins. These studies are extended here to characterize the packing of interfacial and noninterfacial amino acids and the packing of amino acids in the interfaces of helices that have either right- or left-handed crossing angles, and either parallel or antiparallel orientations. We show that the most abundant tightly packed interfacial residues in membrane proteins are Gly, Ala, and Ser, and that helices with left-handed crossing angles are more tightly packed on average than helices with right-handed crossing angles. The second method used to characterize helix-helix interactions involves the use of helix contact plots. We find that helices in membrane proteins exhibit a broader distribution of interhelical contacts than helices in soluble proteins. Both helical membrane and soluble proteins make use of a general motif for helix interactions that relies mainly on four residues (Leu, Ala, Ile, Val) to mediate helix interactions in a fashion characteristic of left-handed helical coiled coils. However, a second motif for mediating helix interactions is revealed by the high occurrence and high average packing values of small and polar residues (Ala, Gly, Ser, Thr) in the helix interfaces of membrane proteins. Finally, we show that there is a strong linear correlation between the occurrence of residues in helix-helix interfaces and their packing values, and discuss these results with respect to membrane protein structure prediction and membrane protein stability.     

Helix-helix interactions between homo- and heterodimeric gamma-carboxyglutamate-containing conantokin peptides and their derivatives

The conantokins are a family of small, naturally occurring gamma-carboxyglutamate (Gla)-rich peptides that specifically antagonize the N-methyl-D-aspartate (NMDA) subtype of ionotropic glutamate receptor. One member of this family, conantokin-G (con-G), undergoes Ca(2+)-mediated self-assembly to form an antiparallel helical dimer. Subunit interactions in this complex are incumbent upon intermolecular Ca(2+) bridging of Gla residues spaced at i, i + 4, i + 7, i + 11 intervals within the monomer. Herein, we further probe the molecular determinants governing such helix-helix interactions. Select variants were synthesized to evaluate the contributions of non-Gla residues to conantokin self-association. Con-G dimerization was shown to be exothermic and accompanied by positive heat capacity changes. Using positional Gla variants of conantokin-R (con-R), a non-dimerizing conantokin, i, i + 4, i + 7, i + 11 Gla spacing alone was shown to be insufficient for self-assembly. The Ca(2+)-dependent antiparallel heterodimerization of con-G and con-T(K7 gamma), two peptides that harbor optimal Gla spacing, was established. Last, the effects of covalently constrained con-G dipeptides on NMDA-evoked current in HEK293 cells expressing combinations of NR1a, NR1b, NR2A, and NR2B subunits of the NMDA receptor were investigated. The antiparallel dipeptide was unique in its ability to potentiate current at NR1a/2A receptors and, like monomeric con-G, was inhibitory at NR1a/2B and NR1b/2B combinations. In contrast, the parallel species was completely inactive at all subunit combinations tested. These results suggest that, under physiological Ca(2+) concentrations, equilibrium levels of con-G dimer most likely exist in an antiparallel orientation and exert effects on NMDA receptor activity that differ from the monomer.     

Hybrid native partitioning of interactions among nonconserved residues in chimeric proteins

Given any operational criterion for pairwise interatomic interactions, for a pair of structurally homologous proteins there exists for both proteins a unique equivalent partitioning of the nonconserved residue positions into mutually non-interacting clusters. In the formation of a chimeric protein derived from these two parental sequences, if nonnative-like interactions are to be avoided in its tertiary structure, then all of the nonconserved residues of each cluster must necessarily be either maintained or interchanged simultaneously. This hybrid native partitioning criterion is applied to known gene shuffling results. When the degree of estimated disruption is modest, the HybNat algorithm provides an efficient predictor of structural integrity. This supports the expectation that a substantial fraction of sequences that conform to the hybrid native partitioning criterion will yield tertiary structures that largely preserve the native-like interactions of the parental proteins.     

Evaluation of lipid exposure of tryptophan residues in membrane peptides and proteins

Fluorescence quenching is used to gain information on the exposure of tryptophan residues to lipid in membrane-bound proteins and peptides. A protocol is developed to calculate this exposure, based on a comparison of quenching efficiency and of a fluorescence lifetime (or quantum yield) measured for a protein and for a model tryptophan-containing compound. Various methods of analysis of depth-dependent quenching are compared and three universal measures of quenching profile are derived. One of the measures, related to the area under profile, is used to estimate quenching efficiency. The method is applied to single tryptophan mutants of a membrane-anchoring nonpolar peptide of cytochrome b(5) and of an outer membrane protein A. Analysis of quenching of the cytochrome's nonpolar peptide by a set of four brominated lipids reveals a temperature-controlled reversible conformational change, resulting in increased exposure of tryptophan to lipid and delocalization of its transverse position. Kinetic quenching profiles and fluorescence binding kinetics reported by Kleinschmidt et al. (Biochemistry (1999) 38, 5006-5016) were analyzed to extract information on the relative exposure of tryptophan residues during folding of an outer membrane protein A. Trp-102, which translocates across the bilayer, was found to be noticeably shielded from the lipid environment throughout the folding event compared to Trp-7, which remains on the cis side. The approach described here provides a new tool for studies of low-resolution structure and conformational transitions in membrane proteins and peptides.