Ionic complexation properties of per(3,6-anhydro)cyclodextrin derivatives towards lanthanides

Using per(3,6-anhydro)cyclodextrin derivatives [per(3,6-anhydro)CD], it was possible to produce new lanthanide chelates by careful choice of the size and functional groups. Heptakis(3,6-anhydro-2-O-methyl)cyclomaltoheptaose fulfils the best criteria for complexation of lanthanide ions. Nuclear magnetic resonance was used to derive the association constants and the stoichiometries of these new complexes. Finally, a three-dimensional structure of these complexes consistent with the NMR data is proposed, to ascertain the position of lanthanide in the cavity of the per(3,6-anhydro)CD. For the present purposes, heptakis(2-O-acetyl-3,6-anhydro)cyclomaltoheptaose, octakis(2-O-acetyl-3,6-anhydro)cyclomaltooctaose, heptakis(3,6-anhydro-2-O-methyl)cyclomaltoheptaose and octakis(3,6-anhydro-2-O-methyl)cyclomaltooctaose have been synthesized and purified.     

Synthesis and analytical characterization of the sodium salt of heptakis(2-O-methyl-3,6-di-O-sulfo)cyclomaltoheptaose, a chiral resolving agent candidate for capillary electrophoresis

A pure, single isomer, strong electrolyte chiral resolving agent candidate for capillary electrophoresis, the sodium salt of heptakis(2-O-methyl-3,6-di-O-sulfo)cyclomaltoheptaose has been synthesized on the 100-g scale, in greater than 97% purity, through heptakis(2,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose, heptakis(2-O-methyl-3,6-di-O-tert-butyldimethylsilyl)cyclomaltohep taose and heptakis(2-O-methyl)cyclomaltoheptaose intermediates. The structural identity of each intermediate and the final product was conclusively established by high-resolution MALDI-TOF mass spectrometry, variable-temperature 1H and 13C NMR spectroscopy and X-ray crystallography. The purity of each intermediate and the final product was determined by gradient high-performance liquid chromatography (HPLC) and indirect UV detection capillary electrophoresis.     

Crystal structures of heptakis(2,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose, heptakis(2-O-methyl-3,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose and heptakis(2-O-methyl)cyclomaltoheptaose

Crystal structures of heptakis(2,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose, heptakis(2-O-methyl-3,6-di-O-tert-butyldimethylsilyl)cyclomaltohep taose and heptakis(2-O-methyl)cyclomaltoheptaose were determined from X-ray diffraction patterns obtained for single crystals of the title compounds grown from ethyl acetate and ethanol, respectively, as solvent. The crystal structures prove conclusively that quantitative migration of the tert-butyldimethylsilyl group from the 2-O- to the 3-O-position [D. Icheln, B. Gehrcke, Y. Piprek, P. Mischnick, W.A. Konig, M.A. Dessoy, A.F. Morel, Carbohydr. Res., 280 (1996) 237-250] was achieved during methylation of heptakis(2,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose by iodomethane-sodium hydride.     

Nonaqueous synthesis of a selectively modified, highly anionic sulfopropyl ether derivative of cyclomaltoheptaose (beta-cyclodextrin) in the presence of 18-crown-6

A highly anionic cyclomaltooligosaccharide (cyclodextrin, CD) derivative containing sulfopropyl functional groups on the primary face of the CD was synthesized. Heptakis(2,3-di-O-methyl)cyclomaltoheptaose [heptakis(2,3-di-O-methyl)-beta-cyclodextrin] was reacted with 1,3-propane sultone and potassium hydride (KH) in anhydrous tetrahydrofuran in the presence of 18-crown-6 to yield highly substituted potassium heptakis(2,3-di-O-methyl-6-O-sulfopropyl)cyclomaltoheptaose [heptakis(KSPDM)-beta-CD] with an average degree of substitution (DSCE) of 6.9 as determined by inverse detection capillary electrophoresis (CE). The principal species in the product is the fully substituted heptakis(KSPDM)-beta-CD. Complete NMR assignments of the hydrogen and carbon atoms are made using a combination of gCOSY and gHSQC. In the absence of 18-crown-6, the reaction generates a mixture of multiply charged derivatives with average DSCE of 4.1. The possible roles of the crown ether in the reaction are discussed. The ROESY NMR spectrum of the inclusion complex that forms between heptakis(KSPDM)-beta-CD and 2-naphthoic acid in D2O reveals that 2-naphthoic acid inserts with the carboxyl group toward the derivatized primary rim of the cyclodextrin.     

The influence of cyclomaltooligosaccharides (cyclodextrins) on the enzymatic decomposition of l-phenylalanine catalyzed by phenylalanine ammonia-lyase

Cyclomaltohexaose (α-cyclodextrin) and cyclomaltoheptaose (β-cyclodextrin) as well as their four methyl ether derivatives, that is, hexakis(2,3-di-O-methyl)cyclomaltohexaose, hexakis(2,3,6-tri-O-methyl)cyclomaltohexaose, heptakis(2,3-di-O-methyl)cyclomaltoheptaose, and heptakis(2,3,6-tri-O-methyl)cyclomaltoheptaose were investigated as the additives in the course of enzymatic decomposition of l-phenylalanine catalyzed by phenylalanine ammonia-lyase. Only a few of those additives behaved like classical inhibitors of the enzymatic reaction under investigation because the values of the Michaelis constants that were obtained, as well as the maximum velocity values depended mostly atypically on the concentrations of those additives. In most cases cyclodextrins caused mixed inhibition, both competitive and noncompetitive, but they also acted as activators for selected concentrations. This atypical behaviour of cyclodextrins is caused by three different and independent effects. The inhibitory effect of cyclodextrins is connected with the decrease of substrate concentration and unfavourable influence on the flexibility of the enzyme molecules. On the other hand, the activating effect is connected with the decrease of product concentration (the product is an inhibitor of the enzymatic reaction under investigation). All these effects are caused by the ability of the cyclodextrins to form inclusion complexes.     

Synthesis and silica-based immobilization of monofunctionalized cyclomaltoheptaose derivatives for enantioselective HPLC

Heptakis(6-O-tert-butyldimethylsilyl-2,3-di-O-methyl)cyclomaltohep taose (6-TBDMS-2,3-Me-beta-CD) and heptakis(2,3,6-tri-O-methyl)cyclomaltoheptaose (per-Me-beta-CD) were monofunctionalized by introduction of a 5-cyanopentyl group attached to one of the O-2, O-3 or O-6 positions and subsequent reduction with lithium aluminum hydride to give the corresponding mono-O-(omega-aminohexyl) derivatives. Alternatively, after attachment of a 7-octenyl group and further epoxidation the corresponding mono-omega-epoxyoctyl derivatives of 6-TBDMS-2,3-Me-beta-CD were obtained. The mono-O-(omega-aminohexyl) derivatives were immobilized by reaction with glycidoxypropyl and 'aldehyde' silica, whereas aminopropyl silica was used for the immobilization of the monoepoxyoctyl derivatives. The immobilized cyclodextrin derivatives were partially evaluated as chiral stationary phases in high-performance liquid chromatography (HPLC) and micro-HPLC.     

Synthesis and biological evaluation of 2-amino-2-deoxy- and 6-amino-6-deoxy-cyclomaltoheptaose polysulfates as synergists for angiogenesis inhibition

2-Amino-2-deoxy-cyclomaltoheptaose was prepared from β-cyclodextrin perbenzoate [heptakis(2,3,6-tri-O-benzoyl)cyclomaltoheptaose] by a series of reactions including selective de-O-benzoylation at C-2 of one of the perbenzoylated -glucopyranosyl moieties, oxidation to the 2-ulose derivative, oxime formation, and reduction to the 2-amino-2-deoxy- -glucose moiety. This compound and 6-amino-6-deoxycyclomaltoheptaose accessible from β-cyclodextrin through the known procedure were sulfated to give polysulfated aminocyclomaltoheptaose derivatives (3, 5). Employing β-cyclodextrin polysulfate as a reference compound, the synergistic effects of 3 and 5 for cortexolone on angiogenesis inhibitory activity were examined by rabbit-corneal micropocket assay system. In contrast to the significant anti-angiogenesis activity of the β-cyclodextrin polysulfate-cortexolone pair, neither 3 nor 5 showed any cooperative activity with cortexolone in the inhibition of basic FGF-induced angiogenesis.     

A structural and thermal investigation of the inclusion of parabens in heptakis(2,6-di-O-methyl)cyclomaltoheptaose

The structures of the inclusion complexes formed by heptakis(2,6-di-O-methyl)cyclomaltoheptaose and methyl-, ethyl-, propyl- and butyl parabens have been solved and analysed by X-ray diffraction. Each inclusion complex crystallises in the space group P2(1)2(1)2(1) with Z=4 and a host-to-guest ratio of 1:1. However the packing arrangements and modes of guest inclusion are not equivalent for the four structures. The analytical data indicated that two isostructural pairs, the methyl- and ethyl-paraben complexes, have similar cell parameters that differ from those of the propyl- and butyl paraben complexes. The results of thermogravimetric analysis and differential scanning calorimetry of the complexes are also reported.     

Bacterial toxicity of cyclodextrins: Luminuous Escherichia coli as a model

The effect of various concentrations of natural and chemically modified cyclodextrins on the luminescence of an Escherichia coli suspension was investigated. All cyclodextrins were found to reduce, albeit to a varying degree, the luminescence level of the bacterial cells, thus suggesting a direct interaction between the cyclodextrins and cells. The inhibitory concentrations IC₂₀ and IC₅₀ of the various cyclodextrins were determined and taken to represent their toxicity effects upon the bacterial cells. Among the natural cyclodextrins, - and -CD interfered minimally with the bacterial luminescence and consequently were essentially non-toxic. The following descending order of toxicity was observed: -CD -CD > -CD. Among the chemically modified cyclodextrins, Dimeb was clearly toxic while Trimeb and the hydroxylated derivatives (hydroxypropyl-ga-CD, HPACD;--CD, HPBCD;--CD, HPGCD) were essentially non-toxic. The following descending order of toxicity was observed: Dimeb HPBCD > Trimeb > HPACD > HPGCD.     

Crystal structure of the inclusion complex of the antibacterial agent triclosan with cyclomaltoheptaose and NMR study of its molecular encapsulation in positively and negatively charged cyclomaltoheptaose derivatives

The inclusion complexes of triclosan with native cyclomaltoheptaose (beta-cyclodextrin, betaCD) as well as with negatively and positively charged derivatives are studied. The structure of the inclusion complex betaCD/triclosan in the crystalline state [P1, a=15.189(5), b=15.230(6), c=16.293(6), alpha=91.07(4), beta=91.05(3) gamma=100.71(3)] comprises two crystallographically independent host macrocycles A and B. The packing results in betaCD dimers that align head-to-head and form infinite channels along the c-axis. Only one guest molecule statistically disordered over two positions, (the dichlorophenyl ring in the cavities of either A or B) corresponds to each dimer (a 2:1 host/guest complex). The enclosed dichlorophenyl ring enters the dimer through the primary side, whereas the hydrophilic chlorophenol ring extends in the space between dimers. Water molecules in five positions are also enclosed in the intradimer region, arranged on a plane perpendicular to the sevenfold axis of betaCD. The NMR spectroscopic studies in aqueous solution show the presence of both 1:1 and 2:1 betaCD/triclosan complexes. In the first case, two different 1:1 complexes are simultaneously present, each with either ring entering the narrow primary side of one betaCD molecule. In the 2:1 complex both rings of triclosan are included in two independent betaCD hosts, a precursor to the supramolecular arrangement found in the crystalline form. In the case of the negatively charged sodium heptakis[6-deoxy-6-(3-thiopropionate)]-betaCD, the NMR studies at pH 7.9 show a complete inclusion of triclosan inside the host in two orientations, one for the non-ionized (phenol) and reverse for the ionized (phenolate) form. Finally, for the positively charged heptakis(6-aminoethylamino-6-deoxy)-betaCD, inclusion of triclosan is possible only when the pH is raised to 10 and it is concluded that both aromatic rings are alternatively inside the cavity. However in that case also, inclusion of the entire guest in the elongated cavity is suggested.     

Evaluation of newly synthesized and commercially available charged cyclomaltooligosaccharides (cyclodextrins) for capillary electrokinetic chromatography

A highly new charged cyclodextrin (CD) derivatives, (6-O-carboxymethyl-2,3-di-O-methyl)cyclomaltoheptaoses (CDM-beta-CDs), was synthesized and characterized as anionic reagents for capillary electrophoresis (CE) in an electrokinetic chromatography mode of separation. Substitution with dimethyl groups at the secondary hydroxyl sites of the CD is aimed at influencing the magnitude and selectivity of analyte-CD interactions, while substitution by carboxymethyl groups at the primary hydroxyl sites provides for high charge and electrophoretic mobility. Full regioselective methylation at the secondary hydroxyl sites was achieved in this work, while substitution at the primary hydroxyl sites generated a mixture of multiply charged products. The separation performance of CDM-beta-CD was evaluated using a variety of analyte mixtures. The results obtained from commercially available negatively charged cyclodextrins, heptakis(2,3-di-O-methyl-6-O-sulfo)cyclomaltoheptaose (HDMS-beta-CD) and O-(carboxymethyl)cyclomaltoheptaose (CM-beta-CD) with an average degree of substitution one (DS 1), were compared to CDM-beta-CD using a sample composed of eight positional isomers of dihydroxynaphthalene. Four hydroxylated polychlorobiphenyl derivatives, a group of chiral and isomeric catchecins, and chiral binaphthyl compounds were also separated with CDM-beta-CD. The effect of adding neutral beta-cyclodextrin (beta-CD) into the running buffer containing charged cyclodextrins was investigated and provided evidence of significant inter-CD interactions. Under certain running buffer conditions, the charged cyclodextrins also appear to adsorb to the capillary walls to various degrees.     

Water soluble heptakis(6-deoxy-6-thio)cyclomaltoheptaose capped gold nanoparticles via metal vapour synthesis: NMR structural characterization and complexation properties

The complexation of heptakis(6-deoxy-6-thio)cyclomaltoheptaose to gold nanoparticles prepared by using the Metal Vapour Synthesis (MVS) led to water soluble gold nanoaggregates, thermally stable at 25 °C. The role of gold concentration in the MVS-derived starting solution as well as of the cyclodextrin to gold molar ratio on the size of cyclodextrin-capped gold nanoparticles were investigated. The ability of cyclodextrin bonded to gold nanoparticles to include deoxycytidine was also probed in comparison with that of 1-thio-β-d-glucose sodium salt.     

Synthesis of novel cyclomaltoheptaose (beta-cyclodextrin) derivatives containing the Ebselen key moiety of benzoisoselenazolone

A series of five novel cyclomaltoheptaose (beta-cyclodextrin) derivatives containing benzoisoselenazolone groups have been synthesized as glutathione peroxidase mimics.     

Synthesis of 2,3-O-(propane-1,2-diyl)- and 2,3-O-(3-hydroxypropane-1,2-diyl)-cyclomaltoheptaose

2¹,3¹-O-(Propane-1,2-diyl)cyclomaltoheptaose has been prepared from 2-O-allylcyclomaltoheptaose by mercuration in trifluoroacetic acid, followed by reduction with sodium borohydride. 2-O-(2,3-Epoxypropyl)cyclomaltoheptaose, prepared from 2-O-allylcyclomaltoheptaose by oxidation with dimethyldioxirane, was converted into 2¹,3¹-O-(3-hydroxypropane-1,2-diyl)cyclomaltoheptaose by treatment with trifluoroacetic acid. Both derivatives containing fused 1,4-dioxane rings are mixtures of stereoisomers, in which the methyl and hydroxymethyl group, respectively, that is linked to this ring, occupies an axial or an equatorial position.     

Cyclodextrins as carriers of cholesterol and fatty acids in cultivation of mycoplasmas.

The design of fully or partly defined media for mycoplasma cultivation involves the need to provide the essential lipids, cholesterol and long-chain fatty acids, in an assimilable and nontoxic form. This study introduces cyclodextrins (CDs) as carriers of these lipids, thus suggesting alternatives to serum or bovine serum albumin (BSA). The effects of beta-CD and two forms of chemically modified beta-CD, dimethyl-beta-CD (Dimeb) and hydroxypropyl-beta-CD (Hyprob), on the growth of Mycoplasma capricolum and Acholeplasma laidlawii were investigated in a basal medium as well as in serum- and BSA-supplemented media. beta-CD was found to inhibit the growth of the sterol-requiring M. capricolum in both serum and BSA media, but it stimulated the growth of the sterol-independent A. laidlawii. Inhibition by beta-CD was explained by its capacity to form a water-insoluble CD-cholesterol complex, thus rendering it unavailable to the cells. Dimeb, despite its strong complexing ability for lipids, was found to be toxic to all mycoplasma species in both liquid cultures and agar diffusion susceptibility tests. In sharp contrast to beta-CD and Dimeb, Hyprob (with a degree of substitution of 4.2) added at 5 and 10 mM to a basal medium supplemented with lipids permitted growth of M. capricolum. Comparison of growth curves in the two conventional serum and BSA media with those in two Hyprob media revealed comparable growth and growth rates.     

C NMR study on peracetylated derivatives of cyclomaltoheptaose (β-cyclodextrin, β-CD) and its methylated derivative

Peracetylated samples of cyclomaltoheptaose (β-cyclodextrin, β-CD) and its methylated derivative were studied by ¹³C NMR. The acetyl carbonyl carbon signal in peracetylated β-CD was resolved into a triplet, and the three peaks were assigned by long-range C---H COSY and INAPT techniques. The individual carbonyl peak was found to be indicative of the location of the acetyl group on the 2, 3, and 6 position in the glucose residues. An acetylated derivative of a partly methylated β-CD was also subjected to ¹³C NMR analysis to determine the distribution of acetyl and, subsequently, methyl groups on the glucose residues.     

Characterization of the hidden glass transition of amorphous cyclomaltoheptaose

An amorphous solid of cyclomaltoheptaose (β-cyclodextrin, β-CD) was formed by milling its crystalline form using a high-energy planetary mill at room temperature. The glass transition of this amorphous solid was found to occur above the thermal degradation point of the material preventing its direct observation and thus its full characterization. The corresponding glass transition temperature (T_g) and the ΔC_p at T_g have, however, been estimated by extrapolation of T_g and ΔC_p of closely related amorphous compounds. These compounds include methylated β-CD with different degrees of substitution and molecular alloys obtained by co-milling β-CD and methylated β-CD (DS 1.8) at different ratios. The physical characterization of the amorphous states have been performed by powder X-ray diffraction and differential scanning calorimetry, while the chemical integrity of β-CD upon milling was checked by NMR spectroscopy and mass spectrometry.     

Structure of inclusion complexes of cyclomaltoheptaose (cycloheptaamylose): crystal structure of the 1-adamantanemethanol adduct

Cyclomaltoheptaose (cycloheptaamylose) has been crystallized with 1-adamantanemethanol as the guest molecule. The complex crystallized in space group C222(1), with unit-cell dimensions a = 19.162 (13), b = 23.965 (17), and c = 32.597 (27) A. The structure was solved by rotation-translation search-methods. The cyclomaltoheptaose exists as a dimer in the crystal by means of extensive hydrogen-bonding across the secondary hydroxyl ends of two cyclomaltoheptaose molecules. The two halves of the dimer are related by a crystallographic two-fold axis. The primary hydroxyl ends of two adjacent cyclomaltoheptaose molecules are also related by a crystallographic two-fold axis, but do not directly hydrogen bond to one another. Instead, they are held in place by a strong hydrogen bond from the hydroxyl group of the 1-adamantanemethanol to a primary hydroxyl group on an adjacent cyclomaltoheptaose molecule. Other stabilizing hydrogen bonds are formed via three water molecules which are situated at the primary hydroxyl interface, and others that form parallel columns stabilizing the crystal structure. A unique feature of this complex is the presence of trapped water in the cavity at the secondary hydroxyl interface. This water is distributed over 3 disordered sites. Its presence blocks one possible site for the 1-adamantanemethanol, which, instead, binds near the primary hydroxyl end, with its hydroxyl group and part of the adamantane moiety protruding from the cyclomaltoheptaose.     

Use of cyclodextrins in capillary zone electrophoresis for the separation of optical isomers: Resolution of racemic tryptophan derivatives

In this study capillary zone electrophoresis has been used for the separation of racemic tryptophan derivatives in their enantiomers. The effect of cyclodextrins with different shape, added to the background electrolyte, on the migration time of 10 compounds, including methyl tryptophan, hydroxy tryptophan, and tryptophan ester derivatives, has been studied. Furthermore, the effect of cyclodextrins with different shape and that of the composition of the background electrolyte on the enantiomer resolution are discussed. Among different cyclodextrins used α-cyclodextrin and heptakis(2,6-di-O-methyl)-β-cyclodextrin were found to possess the best complexing capacity and thus the resolution power toward analysed compounds.     

Crystal and molecular structure of octakis(6-bromo-6-deoxy)-gamma-cyclodextrin. A novel stacking of a distorted macrocycle

Octakis(6-bromo-6-deoxy)cyclomaltooctaose, perbrominated gamma-cyclodextrin at the primary side, crystallises from methanol in a very unique manner. The macrocycles are quite distorted in contrast to their beta-cyclodextrin analogue, heptakis(6-bromo-6-deoxy)cyclomaltoheptaose. The two monomers, arranged head-to-head, form a completely new kind of dimer by mutually entering into each other, both at the primary and the secondary sides. At the primary, hydrophobic side, they interact by Br...Br interactions and at the secondary, hydrophilic side, by direct H-bonds between hydroxylic groups. The short contacts of the Br atoms contribute to the macrocycle's distortion, which is considerable compared to the few available structures of gamma-CDs persubstituted at the primary side with bulkier and in some occasions charged substituents. Water and methanol molecules are entrapped in the cyclodextrin cavity, mostly in the area of the secondary hydroxylic groups connecting the macrocycles by indirect H-bonds. Thus the solvent molecules strengthen the association of the two monomers and contribute to the stabilisation of the cavity. The monomers stack along the a-axis and form columns that align in parallel lines along the same axis resulting in the formation of alternating hydrophobic and hydrophilic layers perpendicular to the a-axis resembling in this respect, the structure of the analogous perbrominated beta-cyclodextrin.