A poliovirus type 1 neutralization epitope is located within amino acid residues 93 to 104 of viral capsid polypeptide VP1.

Using nuclease Bal31, deletions were generated within the poliovirus type 1 cDNA sequences, coding for capsid polypeptide VP1, within plasmid pCW119. The fusion proteins expressed in Escherichia coli by the deleted plasmids reacted with rabbit immune sera directed against poliovirus capsid polypeptide VP1 (alpha VP1 antibodies). They also reacted with a poliovirus type 1 neutralizing monoclonal antibody C3, but reactivity was lost when the deletion extended up to VP1 amino acids 90-104. Computer analysis of the protein revealed a high local density of hydrophilic amino acid residues in the region of VP1 amino acids 93-103. A peptide representing the sequence of this region was chemically synthesized. Once coupled to keyhole limpet hemocyanin, this peptide was specifically immunoprecipitated by C3 antibodies. The peptide also inhibited the neutralization of poliovirus type 1 by C3 antibodies. We thus conclude that the neutralization epitope recognized by C3 is located within the region of amino acids 93-104 of capsid polypeptide VP1.     

Nuclear localization of poliovirus capsid polypeptide VP1 expressed as a fusion protein with SV40-VP1

The poliovirus cDNA fragment coding for capsid polypeptide VP1 was inserted between the EcoRI and BamHI sites of SV40 DNA, generating a chimaeric gene in which the sequence of the 302 amino acids (aa) of poliovirus capsid polypeptide VP1 was placed downstream from that of the 94 N-terminal aa of SV40 capsid polypeptide VP1. The resulting defective, hybrid virus, SV40-delta 1 polio, was propagated in CV1 cells using an early SV40 mutant, am404, as a helper. Cells doubly infected by SV40-delta 1 polio and am404 expressed a 50-kDal fusion protein which was specifically immunoprecipitated by polyclonal and/or monoclonal antibodies raised against poliovirus capsids or against poliovirus polypeptide VP1. Examination of the infected cells by immunofluorescence after staining with anti-poliovirus VP1 immune sera revealed that the fusion protein was mostly located in the intra- and perinuclear space of the cells, in contrast to the exclusively intracytoplasmic location of genuine poliovirus VP1 polypeptide that was observed in poliovirus-infected cells. This suggests that the N-terminal part of the SV40-VP1 polypeptide could contain an important sequence element acting as a migration signal for the transport of proteins from the cytoplasm to the nucleus.     

Myristylation of poliovirus capsid precursor P1 is required for assembly of subviral particles.

The poliovirus capsid precursor polyprotein, P1, is cotranslationally modified by the addition of myristic acid. We have examined the importance of myristylation of the P1 capsid precursor during the poliovirus assembly process by using a recently described recombinant vaccinia virus expression system which allows the independent production of the poliovirus P1 protein and the poliovirus 3CD proteinase (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 65:2088-2092, 1991). We constructed a site-directed mutation in the poliovirus cDNA encoding an alanine at the second amino acid position of P1 in place of the glycine residue required for the myristic acid addition and isolated a recombinant vaccinia virus (VVP1myr-) that expressed a nonmyristylated form of the P1 capsid precursor. The 3CD proteinase expressed by a coinfecting vaccinia virus, VVP3, proteolytically processed the nonmyristylated precursor P1 expressed by VVP1myr-. However, the processed capsid proteins, VP0, VP3, and VP1, did not assemble into 14S or 75S subviral particles, in contrast to the VP0, VP3, and VP1 proteins derived from the myristylated P1 precursor. When cells were coinfected with VVP1myr- and poliovirus type 1, the nonmyristylated P1 precursor expressed by VVP1myr- was processed by 3CD expressed by poliovirus, and the nonmyristylated VP0-VP3-VP1 (VP0-3-1) protomers were incorporated into capsid particles and virions which sedimented through a 30% sucrose cushion. Thus, the nonmyristylated P1 precursor and VP0-3-1 protomers were not excluded from sites of virion assembly, and the assembly defects observed for the nonmyristylated protomers were overcome in the presence of myristylated capsid protomers expressed by poliovirus. We conclude that myristylation of the poliovirus P1 capsid precursor plays an important role during poliovirus assembly by facilitating the appropriate interactions required between 5S protomer subunits to form stable 14S pentamers. The results of these studies demonstrate that the independent expression of the poliovirus P1 and 3CD proteins by using recombinant vaccinia viruses provides a unique experimental tool for analyzing the dynamics of the poliovirus assembly process.     

High-level expression of the simian virus 40 genes LP1, VP1 and VP2 as fusion proteins in Escherichia coli

The complete sequences of the SV40 agnogene (LP1) and the genes coding for the capsid proteins VP1 and VP2 have been cloned into Escherichia coli expression plasmids. High levels of expression were obtained when the SV40 genes were inserted into the coding sequence of the influenza virus NS1 gene, which has previously been expressed in E. coli. The NS1A-LP1 and NS1A-VP2 chimeric proteins consist of the 81 N-terminal residues of NS1 (designated as peptide NS1A) fused to the complete sequence of the corresponding SV40 protein. The NS1A-VP1 chimera consists of NS1A followed by a linker of nine arbitrary residues and the complete sequence of the SV40 major capsid protein. The observed levels of expression vary considerably among the three chimeric proteins, ranging from approx. 70 micrograms/ml in the case of NS1A-LP1 to approx. 5 micrograms/ml in the case of NS1A-VP2. Cyanogen bromide cleavage of the NS1A-LP1 fusion protein produces fragments with Mrs expected for isolated NS1A and LP1 peptides. A plasmid has also been constructed which expresses the NS1A peptide in high yield.     

In vivo and in vitro association of hsc70 with polyomavirus capsid proteins.

Members of the 70-kDa family of cellular stress proteins assit in protein folding by preventing inappropriate intra- and intermolecular interactions during normal protein synthesis and transport and when cells are exposed to a variety of environmental stresses. During infection of A31 mouse fibroblasts with polyomavirus, the constitutive form of hsp70, hsc70, coimmunoprecipitated with all three viral capsid proteins (VP1, VP2, and VP3). In addition, the subcellular location of hsc70 changed from cytoplasmic to nuclear late in polyomavirus infection, coincident with the nuclear localization of the viral capsid proteins. VP1 and VP2 expressed in Sf9 insect cells with recombinant baculovirus vectors also coimmunoprecipitated with an hsp70-like protein, and VP1 expressed in Escherichia coli coimmunoprecipitated with the hsp70 homolog DnaK. Capsid proteins expressed by in vitro translation coimmunoprecipitated with the hsc70 protein present in the reticulocyte translation extract. Therefore, the polyomavirus capsid proteins associate with hsc70 during virus infection as well as in recombinant protein expression systems. This association may play a role in preventing the premature assembly of capsids in the cytosol and/or in facilitating the nuclear transport of capsid protein complexes.     

Adeno-associated virus type 2 VP2 capsid protein is nonessential and can tolerate large peptide insertions at its N terminus

Direct insertion of amino acid sequences into the adeno-associated virus type 2 (AAV) capsid open reading frame (cap ORF) is one strategy currently being developed for retargeting this prototypical gene therapy vector. While this approach has successfully resulted in the formation of AAV particles that have expanded or retargeted viral tropism, the inserted sequences have been relatively short, linear receptor binding ligands. Since many receptor-ligand interactions involve nonlinear, conformation-dependent binding domains, we investigated the insertion of full-length peptides into the AAV cap ORF. To minimize disruption of critical VP3 structural domains, we confined the insertions to residue 138 within the VP1-VP2 overlap, which has been shown to be on the surface of the particle following insertion of smaller epitopes. The insertion of coding sequences for the 8-kDa chemokine binding domain of rat fractalkine (CX3CL1), the 18-kDa human hormone leptin, and the 30-kDa green fluorescent protein (GFP) after residue 138 failed to lead to formation of particles due to the loss of VP3 expression. To test the ability to complement these insertions with the missing capsid proteins in trans, we designed a system for producing AAV vectors in which expression of one capsid protein is isolated and combined with the remaining two capsid proteins expressed separately. Such an approach allows for genetic modification of a specific capsid protein across its entire coding sequence leaving the remaining capsid proteins unaffected. An examination of particle formation from the individual components of the system revealed that genome-containing particles formed as long as the VP3 capsid protein was present and demonstrated that the VP2 capsid protein is nonessential for viral infectivity. Viable particles composed of all three capsid proteins were obtained from the capsid complementation groups regardless of which capsid proteins were supplied separately in trans. Significant overexpression of VP2 resulted in the formation of particles with altered capsid protein stoichiometry. The key finding was that by using this system we successfully obtained nearly wild-type levels of recombinant AAV-like particles with large ligands inserted after residue 138 in VP1 and VP2 or in VP2 exclusively. While insertions at residue 138 in VP1 significantly decreased infectivity, insertions at residue 138 that were exclusively in VP2 had a minimal effect on viral assembly or infectivity. Finally, insertion of GFP into VP1 and VP2 resulted in a particle whose trafficking could be temporally monitored by using confocal microscopy. Thus, we have demonstrated a method that can be used to insert large (up to 30-kDa) peptide ligands into the AAV particle. This system allows greater flexibility than current approaches in genetically manipulating the composition of the AAV particle and, in particular, may allow vector retargeting to alternative receptors requiring interaction with full-length conformation-dependent peptide ligands.     

Effects of mutations in poliovirus 3Dpol on RNA polymerase activity and on polyprotein cleavage.

A series of short insertion mutations was introduced into the poliovirus gene for 3Dpol at a number of different locations. When substituted for wild-type sequences in a full-length, infectious cDNA and tested for infectivity, all 3D mutants were nonviable. The mutant cDNAs were introduced into a bacterial plasmid designed to direct the expression of poliovirus 3CD, a viral protein composed of contiguous protease and RNA polymerase sequences. Bacteria transformed with these plasmids all expressed similar amounts of 3CD, and all mutant proteins cleaved themselves to generate wild-type 3Cpro and mutant 3Dpol polypeptides with approximately the same efficiency as wild-type 3CD. The released mutant 3Dpol proteins were all defective in RNA-dependent RNA polymerase activity in vitro. Uncleaved 3CD is a protease required for processing the viral capsid protein precursor, P1. In an in vitro assay of P1 cleavage activity, some of the mutant 3CD proteins expressed in Escherichia coli showed normal activity, while others were clearly inactive. Thus, alterations in the sequence and/or folding of different regions of the 3D protein have differential effects on its various activities.     

Coinfection with recombinant vaccinia viruses expressing poliovirus P1 and P3 proteins results in polyprotein processing and formation of empty capsid structures.

The assembly process of poliovirus occurs via an ordered proteolytic processing of the capsid precursor protein, P1, by the virus-encoded proteinase 3CD. To further delineate this process, we have isolated a recombinant vaccinia virus which expresses, upon infection, the poliovirus P1 capsid precursor polyprotein with an authentic carboxy terminus. Coinfection of HeLa cells with the P1-expressing vaccinia virus and with a second recombinant vaccinia virus which expresses the poliovirus proteinase 3CD resulted in the correct processing of P1 to yield the three individual capsid proteins VP0, VP3, and VP1. When extracts from coinfected cells were fractionated on sucrose density gradients, the VP0, VP3, and VP1 capsid proteins were immunoprecipitated with type 1 poliovirus antisera from fractions corresponding to a sedimentation consistent for poliovirus 75S procapsids. Examination of these fractions by electron microscopy revealed structures which lacked electron-dense cores and which corresponded in size and shape to those expected for poliovirus empty capsids. We conclude that the expression of the two poliovirus proteins P1 and 3CD in coinfected cells is sufficient for the correct processing of the capsid precursor to VP0, VP3, and VP1 as well as for the assembly of poliovirus empty capsid-like structures.     

Encapsidation of poliovirus replicons encoding the complete human immunodeficiency virus type 1 gag gene by using a complementation system which provides the P1 capsid protein in trans.

Poliovirus genomes which contain small regions of the human immunodeficiency virus type 1 (HIV-1) gag, pol, and env genes substituted in frame for the P1 capsid region replicate and express HIV-1 proteins as fusion proteins with the P1 capsid precursor protein upon transfection into cells (W. S. Choi, R. Pal-Ghosh, and C. D. Morrow, J. Virol. 65:2875-2883, 1991). Since these genomes, referred to as replicons, do not express capsid proteins, a complementation system was developed to encapsidate the genomes by providing P1 capsid proteins in trans from a recombinant vaccinia virus, VV-P1. Virus stocks of encapsidated replicons were generated after serial passage of the replicon genomes into cells previously infected with VV-P1 (D. C. Porter, D. C. Ansardi, W. S. Choi, and C. D. Morrow, J. Virol. 67:3712-3719, 1993). Using this system, we have further defined the role of the P1 region in viral protein expression and RNA encapsidation. In the present study, we constructed poliovirus replicons which contain the complete 1,492-bp gag gene of HIV-1 substituted for the entire P1 region of poliovirus. To investigate whether the VP4 coding region was required for the replication and encapsidation of poliovirus RNA, a second replicon in which the complete gag gene was substituted for the VP2, VP3, and VP1 capsid sequences was constructed. Transfection of replicon RNA with and without the VP4 coding region into cells resulted in similar levels of expression of the HIV-1 Gag protein and poliovirus 3CD protein, as indicated by immunoprecipitation using specific antibodies. Northern (RNA) blot analysis of RNA from transfected cells demonstrated comparable levels of RNA replication for each replicon. Transfection of the replicon genomes into cells infected with VV-P1 resulted in the encapsidation of the genomes; serial passage in the presence of VV-P1 resulted in the generation of virus stocks of encapsidated replicons. Analysis of the levels of protein expression and encapsidated replicon RNA from virus stocks after 21 serial passages of the replicon genomes with VV-P1 indicated that the replicon which contained the VP4 coding region was present at a higher level than the replicon which contained a complete substitution of the P1 capsid sequences. These differences in encapsidation, though, were not detected after only two serial passages of the replicons with VV-P1 or upon coinfection and serial passage with type 1 Sabin poliovirus.(ABSTRACT TRUNCATED AT 400 WORDS)     

B Cell Epitopes within VP1 of Type O Foot-and-mouth Disease Virus for Detection of Viral Antibodies

In this study,the coding region of type O FMDV capsid protein VP1 and a series of codon optimized DNA sequences coding for VP1 amino acid residues 141-160(epitope1),tandem repeat 200-213(epitope2(+2)) and the combination of two epitopes(epitope1-2)was genetically cloned into the prokaryotic expression vector pPROExHTb and pGEX4T-1,respectively.VP1 and the fused epitopes GST-E1,GST-E2(+2)and GST-E1-2 were successfully solubly expressed in the cytoplasm of Escherichia coli and Western blot analysis demonstrat...     

Activity of the hybrid trp-lac (tac) promoter of Escherichia coli in Pseudomonas putida. Construction of broad-host-range, controlled-expression vectors

A broad-host-range vector, pKT240, containing the structural gene (aph) for aminoglycoside phosphotransferase (APH), without promoter, has been constructed. Insertion of DNA fragments carrying promoters upstream of aph gene into the unique EcoRI site of this vector results in the expression of the aph gene and consequently the resistance of the host cells to streptomycin. The new vector has been used to show that the hybrid trp-lac (tac) promoter and the promoter of the lacIQ gene of Escherichia coli are active in Pseudomonas putida. Derivatives of pKT240 containing tac and lacIQ sequences may be used as wide-host-range expression vectors. Regulated overproduction of APH and catechol 2,3-oxygenase can be obtained with the aid of the new vectors in both E. coli and P. putida.     

Regions of poliovirus protein VP1 produced in Escherichia coli induce neutralizing antibodies.

Poliovirus type 1 cDNA was prepared from viral RNA encoding the VP1 capsid region of the virus by using a specific DNA primer and was cloned in Escherichia coli. DNA fragments corresponding to VP1 amino acid positions 129 to 302 (pPM5k3), 52 to 302 (pPMhae3), and 24 to 129 (pPMDxba) were incorporated into plasmid vectors designed to express Trp LE-poliovirus VP1 fusion proteins under the control of the inducible tryptophan promoter-operator system. Induction of bacterial cultures containing the plasmids resulted in the production of fusion proteins which accounted for 21% (pPMhae3), 68% (pPM5k3), and 27% (pPMDxba) of the total cell protein. The proteins were purified, and each reacted with polyclonal antibodies raised against intact virions as measured by an enzyme-linked immunosorbent assay. The sera from rabbits immunized with the bacterially produced fusion proteins pPMDxba and pPMhae3 contained poliovirus-neutralizing antibodies.     

Sindbis virus vectors designed to express a foreign protein as a cleavable component of the viral structural polyprotein

Alphavirus-based expression vectors commonly use a duplicated 26S promoter to drive expression of a foreign gene. Here we describe an expression strategy in which the foreign sequences are linked to the gene encoding the 2A protease of foot-and-mouth disease virus and then inserted in frame between the capsid and E3 genes of Sindbis virus. During replication, the 2A fusion protein is synthesized as a component of the viral structural polyprotein that is then released by intramolecular cleavages mediated by the capsid and 2A proteases. Recombinant Sindbis viruses that expressed fusion proteins composed of 2A linked to the green fluorescent protein (GFP) and to the VP7 protein of bluetongue virus were constructed. Viruses engineered to express GFP and VP7 from a duplicate 26S promoter were also constructed. All four viruses expressed the transgene and grew to similar titers in cultured cells. However, the GFP/2A- and VP7/2A-expressing viruses displayed greater expression stability and were less attenuated in newborn mice than the cognate double-subgenomic promoter-based viruses. By combining the two expression strategies, we constructed bivalent viruses that incorporated and expressed both transgenes. The bivalent viruses grew to lower titers in cultured cells and were essentially avirulent in newborn mice. Groups of mice were vaccinated with each VP7- and VP7/2A-expressing virus, and antibody responses to native VP7 were measured in an indirect enzyme-linked immunosorbent assay. Despite their genetic and phenotypic differences, all viruses induced similarly high titers of VP7-specific antibodies. These results demonstrate that 2A fusion protein-expressing alphaviruses may be particularly well suited for applications that require enduring expression of a single protein or coexpression of two alternative proteins.     

Construction of recombinant DNA molecules by the use of a single stranded DNA generated by the polymerase chain reaction: its application to chimeric hepatitis A virus/poliovirus subgenomic cDNA.

In order to study the importance of VP4 in picornavirus replication and translation, we replaced the hepatitis A virus (HAV) VP4 with the poliovirus (PV1) VP4. Using a modification of oligonucleotide site directed mutagenesis and the polymerase chain reaction (PCR), we created a subgenomic cDNA chimera of hepatitis A virus in which the precise sequences coding for HAV VP4 capsid protein were replaced by the sequences coding for the poliovirus VP4 capsid protein. The method involved the use of PCR primers corresponding to the 3' and 5' ends of the poliovirus VP4 sequence and that had HAV VP4 3' and 5' flanking sequences on their 5'ends. Single stranded DNA of 240 and 242 nt containing the 204 nt coding for the complete poliovirus VP4 were produced by using a limiting amount of one of the primers in a PCR reaction. These single stranded PCR products were used like mutagenic oligonucleotides on a single stranded phagemid containing the first 2070 bases of the HAV genome. Using this technique, we precisely replaced the HAV VP4 gene by the poliovirus VP4 gene as determined by DNA sequencing. The cDNA was transcribed into RNA and translated in vitro. The resulting protein could be precipitated by antibody to poliovirus VP4 but not to HAV VP4.     

Poliovirus capsid proteins derived from P1 precursors with glutamine-valine cleavage sites have defects in assembly and RNA encapsidation.

Assembly of poliovirus virions requires proteolytic cleavage of the P1 capsid precursor polyprotein between two separate glutamine-glycine (QG) amino acid pairs by the viral protease 3CD. In this study, we have investigated the effects on P1 polyprotein processing and subsequent assembly of processed capsid proteins caused by substitution of the glycine residue at the individual QG cleavage sites with valine (QG-->QV). P1 cDNAs encoding the valine substitutions were created by site-directed mutagenesis and were recombined into wild-type vaccinia virus to generate recombinant vaccinia viruses which expressed the mutant P1 precursors. The recombinant vaccinia virus-expressed mutant P1 polyproteins were analyzed for proteolytic processing defects in cells coinfected with a recombinant vaccinia virus (VVP3) that expresses the poliovirus 3CD protease and for processing and assembly defects by using a trans complementation system in which P1-expressing recombinant vaccinia viruses provide capsid precursor to a defective poliovirus genome that does not express functional capsid proteins (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 67:3684-3690, 1993). The QV-substituted precursors were proteolytically processed at the altered sites both in cells coinfected with VVP3 and in cells coinfected with defective poliovirus, although the kinetics of cleavage at the altered sites were slower than those of cleavage at the wild-type QG site in the precursor. Completely processed capsid proteins VP0, VP3, and VP1 derived from the mutant precursor containing a valine at the amino terminus of VP3 (VP3-G001V) were unstable and failed to assemble stable subviral structures in cells coinfected with defective poliovirus. In contrast, capsid proteins derived from the P1 precursor with a valine substitution at the amino terminus of VP1 (VP1-G001V) assembled empty capsid particles but were deficient in assembling RNA-containing virions. The assembly characteristics of the VP1-G001V mutant were compared with those of a previously described VP3-VP1 cleavage site mutant (K. Kirkegaard and B. Nelsen, J. Virol. 64:185-194, 1990) which contained a deletion of the first four amino-terminal residues of VP1 (VP1-delta 1-4) and which was reconstructed for our studies into the recombinant vaccinia virus system. Complete proteolytic processing of the VP1-delta 1-4 precursor also occurred more slowly than complete cleavage of the wild-type precursor, and formation of virions was delayed; however, capsid proteins derived from the VP1-G001V mutant assembled RNA-containing virions less efficiently than those derived from the VP1-delta 1-4 precursor.(ABSTRACT TRUNCATED AT 400 WORDS)     

In vitro phenotypic markers of a poliovirus recombinant constructed from infectious cDNA clones of the neurovirulent Mahoney strain and the attenuated Sabin 1 strain.

Infectious cDNA corresponding to the entire genome of the attenuated Sabin strain of type 1 poliovirus has been inserted into EcoRI site of bacterial plasmid pBR325. Two consecutive PstI fragments (nucleotide positions 1814 to 3421) of the infectious cDNA of the Sabin 1 strain were replaced by the corresponding DNA fragments prepared from an infectious DNA clone of the genome of the virulent Mahoney strain of poliovirus type 1. The exchanged segment encodes capsid protein VP1 and part of capsid protein VP3, a region in which a large number of amino acid differences between the attenuated Sabin and the parental, neurovirulent Mahoney strain cluster. The recombinant virus was obtained by DNA transfection of HeLa S3 cells, and several in vitro phenotypes of the virus were compared with those of the parental viruses. The recombinant virus was recognized by a neutralizing monoclonal antibody specific to the Mahoney strain. Growth of the Sabin strain of poliovirus has been shown to be quite dependent upon the bicarbonate concentration (d marker). The growth of the recombinant virus, however, was not highly dependent upon the concentration of bicarbonate in cell culture media, and thus resembled that of the Mahoney strain. On the other hand, the temperature-sensitive multiplication (rct marker) and the small-plaque morphology of the recombinant virus corresponded to the phenotype of the Sabin 1 strain. The in vitro recombination of infectious cDNA clones of genomic RNA and subsequent analysis of the growth properties of the recombinant virus have allowed us to correlate specific mutations in the genome of an RNA virus with certain biological characteristics of that virus.     

Yeast shuttle and integrative vectors with multiple cloning sites suitable for construction of lacZ fusions

We report yeast/Escherichia coli shuttle vectors suitable for fusing yeast promoter and coding sequences to the lacZ gene of E. coli. The vectors contain a region of multiple unique restriction sites including EcoRI, KpnI, SmaI, BamHI, XbaI, SalI, PstI, SphI and HindIII. The region with the unique cloning sites has been introduced in both orientations with respect to lacZ and occurs proximal to the eighth codon of the gene. All the restriction sites have been phased to three different reading frames. Two series of vectors have been constructed. The first series (YEp) has two origins of replication (ori), i.e., of the yeast 2 mu circle and of the ColE1 plasmid of E. coli, and can therefore replicate autonomously in both organisms. These shuttle vectors also have the ApR gene of E. coli and either the yeast LEU2 or URA3 genes to allow for selection of both E. coli and yeast transformants. The second series of vectors (YIp) are identical in all respects to the YEp vectors except that they lack the 2 mu ori. The YIp vectors can be used to integrate lacZ fusions into yeast chromosomal DNA. None of the vectors express beta-galactosidase (beta Gal) in yeast or E. coli in the absence of inserted yeast promoter sequences. The 5'-nontranslated sequences and parts of the coding sequences of various yeast genes have been cloned into representative lacZ fusion vectors. In-frame gene fusions can be detected by beta Gal activity when either yeast or E. coli clones are plated on media containing XGal indicator. Quantitative determinations of promoter activity were made by colorimetric assay of beta Gal activity in whole cells. Fusion of the yeast CYC1 gene to lacZ in one of the vectors allowed detection of regulated expression of this gene when cells were grown under conditions of catabolite repression or derepression.     

A second neutralizing epitope of B19 parvovirus implicates the spike region in the immune response.

We used 18 monoclonal antibodies against B19 parvovirus to identify neutralizing epitopes on the viral capsid. Of the 18 antibodies, 9 had in vitro neutralizing activity in a bone marrow colony culture assay. The overlapping polypeptide fragments spanning the B19 structural proteins were produced in a pMAL-c Escherichia coli expression system and used to investigate the binding sites of the neutralizing antibodies. One of the nine neutralizing antibodies reacted with both VP1 and VP2 capsid proteins and a single polypeptide fragment on an immunoblot, identifying a linear neutralizing epitope between amino acids 57 and 77 of the VP2 capsid protein. Eight of nine neutralizing antibodies failed to react with either of the capsid proteins or any polypeptide fragments, despite reactivities with intact virions in a radioimmunoassay, suggesting that additional conformationally dependent neutralizing epitopes exist.     

Purification of recombinant budgerigar fledgling disease virus VP1 capsid protein and its ability for in vitro capsid assembly.

A recombinant system for the major capsid VP1 protein of budgerigar fledgling disease virus has been established. The VP1 gene was inserted into a truncated form of the pFlag-1 vector and expressed in Escherichia coli. The budgerigar fledgling disease virus VP1 protein was purified to near homogeneity by immunoaffinity chromatography. Fractions containing highly purified VP1 were pooled and found to constitute 3.3% of the original E. coli-expressed VP1 protein. Electron microscopy revealed that the VP1 protein was isolated as pentameric capsomeres. Electron microscopy also revealed that capsid-like particles were formed in vitro from purified VP1 capsomeres with the addition of Ca2+ ions and the removal of chelating and reducing agents.