Eudragit-Based Nanosuspension of Poorly Water-Soluble Drug: Formulation and In Vitro–In Vivo Evaluation

The present study was performed to investigate potential of Eudragit RLPO-based nanosuspension of glimepiride (Biopharmaceutical Classification System class II drug), for the improvement of its solubility and overall therapeutic efficacy, suitable for peroral administration. Nanoprecipitation method being simple and less sophisticated was optimized for the preparation of nanosuspension. Physicochemical characteristics of nanosuspension in terms of size, zeta potential, polydispersity index, entrapment efficiency (% EE) and in vitro drug release were found within their acceptable ranges. The size of the nanoparticles was most strongly affected by agitation time while % EE was more influenced by the drug/polymer ratio. Differential scanning calorimetry and X-ray diffraction studies provided evidence that enhancement in solubility of drug resulted due to change in crystallinity of drug within the formulation. Stability study revealed that nanosuspension was more stable at refrigerated condition with no significant changes in particle size distribution, % EE, and release characteristics for 3 months. In vivo studies were performed on nicotinamide–streptozotocin-induced diabetic rat models for pharmacokinetic and antihyperglycaemic activity. Nanosuspension increased maximum plasma concentration, area under the curve, and mean residence time values significantly as compared to aqueous suspension. Oral glucose tolerance test and antihyperglycaemic studies demonstrated plasma glucose levels were efficiently controlled in case of nanosuspension than glimepiride suspension. Briefly, sustained and prolonged activity of nanosuspensions could reduce dose frequency, decrease drug side effects, and improve patient compliance. Therefore, glimepiride nanosuspensions can be expected to gain considerable attention in the treatment of type 2 diabetes mellitus due to its improved therapeutic activity.KEY WORDS: diabetes mellitus, glimepiride, nanoprecipitation, poloxamer, sustained release     

Enhancement of Dissolution and Skin Permeability of Pentazocine by Proniosomes and Niosomal Gel

Proniosomes (PN) are the dry water-soluble carrier systems that may enhance the oral bioavailability, stability, and topical permeability of therapeutic agents. The low solubility and low oral bioavailability due to extensive first pass metabolism make Pentazocine as an ideal candidate for oral and topical sustained release delivery. The present study was aimed to formulate the PNs by quick slurry method that are converted to niosomes (liquid dispersion) by hydration, and subsequently formulated to semisolid niosomal gel. The PNs were found in spherical shape in the SEM and stable in the physicochemical and thermal analysis (FTIR, TGA, and XRD). The quick slurry method produced high recovery (>?80% yield) and better flow properties (θ?=?28.1–37.4°). After hydration, the niosomes exhibited desirable entrapment efficiency (44.45–76.23%), size (4.98–21.3 μm), and zeta potential (??9.81 to ??21.53 mV). The in vitro drug release (T_100%) was extended to more than three half-lives (2–4 h) and showed good fit to Fickian diffusion indicated by Korsmeyer-Peppas model (n?=?0.136–0.365 and R²?=?0.9747–0.9954). The permeation of niosomal gel was significantly enhanced across rabbit skin compared to the pure drug-derived gel. Therefore, the PNs are found promising candidates for oral as dissolution enhancement and sustained release for oral and topical delivery of pentazocine for the management of cancer pain.     

Enhanced Solubility and Dissolution Rate of Lacidipine Nanosuspension: Formulation Via Antisolvent Sonoprecipitation Technique and Optimization Using Box–Behnken Design

Lacidipine (LCDP) is a highly lipophilic calcium channel blocker of poor aqueous solubility leading to poor oral absorption. This study aims to prepare and optimize LCDP nanosuspensions using antisolvent sonoprecipitation technique to enhance the solubility and dissolution of LCDP. A three-factor, three-level Box–Behnken design was employed to optimize the formulation variables to obtain LCDP nanosuspension of small and uniform particle size. Formulation variables were as follows: stabilizer to drug ratio (A), sodium deoxycholate percentage (B), and sonication time (C). LCDP nanosuspensions were assessed for particle size, zeta potential, and polydispersity index. The formula with the highest desirability (0.969) was chosen as the optimized formula. The values of the formulation variables (A, B, and C) in the optimized nanosuspension were 1.5, 100%, and 8 min, respectively. Optimal LCDP nanosuspension had particle size (PS) of 273.21 nm, zeta potential (ZP) of ?32.68 mV and polydispersity index (PDI) of 0.098. LCDP nanosuspension was characterized using x-ray powder diffraction, differential scanning calorimetry, and transmission electron microscopy. LCDP nanosuspension showed saturation solubility 70 times that of raw LCDP in addition to significantly enhanced dissolution rate due to particle size reduction and decreased crystallinity. These results suggest that the optimized LCDP nanosuspension could be promising to improve oral absorption of LCDP.     

Nanosuspension Based In Situ Gelling Nasal Spray of Carvedilol: Development, In Vitro and In Vivo Characterization

The objective of the present investigation was to develop in situ gelling nasal spray formulation of carvedilol (CRV) nanosuspension to improve the bioavailability and therapeutic efficiency. Solvent precipitation–ultrasonication method was opted for the preparation of CRV nanosuspension which further incorporated into the in situ gelling polymer phase. Optimized formulation was extensively characterized for various physical parameters like in situ gelation, rheological properties and in vitro drug release. Formation of in situ gel upon contact with nasal fluid was conferred via the use of ion-activated gellan gum as carrier. In vivo studies in rabbits were performed comparing the nasal bioavailability of CRV after oral, nasal, and intravenous administration. Optimized CRV nanosuspension prepared by combination of poloxamer 407 and oleic acid showed good particle size [d (0.9); 0.19 μm], zeta potential (+10.2 mV) and polydispersity (span; 0.63). The formulation containing 0.5% w/v gellan gum demonstrated good gelation ability and desired sustained drug release over period of 12 h. In vivo pharmacokinetic study revealed that the absolute bioavailability of in situ nasal spray formulation (69.38%) was significantly increased as compared to orally administered CRV (25.96%) with mean residence time 8.65 h. Hence, such in situ gel system containing drug nanosuspension is a promising approach for the intranasal delivery in order to increase nasal mucosal permeability and in vivo residence time which altogether improves drug bioavailability.KEY WORDS: bioavailability, Carvedilol, in situ gel, intranasal, nanosuspension     

Formulation and Evaluation of Lidocaine Lipid Nanosystems for Dermal Delivery

The objective of the present investigation was to formulate solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for improving the dermal delivery of a local anesthetic agent lidocaine (LID). SLN and NLC were characterized for particle size distribution, polydispersity index, entrapment efficiency, X-ray powder diffraction pattern (XRD), thermal behavior by differential scanning colorimeter (DSC) and surface morphology by transmission electron microscopy (TEM). LID-loaded SLN and NLC were formulated into hydrogels for topical application. The in vitro permeation profiles of LID SLN gel, LID NLC gel, and a marketed LID formulation (Xylocaine® gel) were evaluated by using guinea pig skin. The in vivo efficacy of LID SLN gel, LID NLC gel, and a marketed LID formulation (Xylocaine® gel) gel was evaluated on guinea pig using pinprick test. LID SLN showed a particle size of 78.1 nm with a polydispersity index of 0.556, whereas LID NLC showed a particle size of 72.8 nm with a polydispersity index of 0.463. The entrapment efficiency of LID in both SLN and NLC was 97% and 95.9%, respectively. The TEM studies revealed the almost spherical nature of LID SLN and NLC formulations. The XRD and DSC studies of LID SLN suggested amorphization of drug in the carrier system. The SLN formulation was stable with respect to particle size, polydispersity, and entrapment efficiency for 6 months at 40°C/75% relative humidity (RH). Negligible leakage was observed for the NLC formulation when stored for 1 month at 40°C/75% RH. In vitro permeation studies indicated that LID SLN gel and LID NLC gel significantly sustained the LID release compared to that of Xylocaine® gel. The in vivo efficacy results supported the results of the in vitro permeation studies wherein the LID SLN gel and LID NLC gel resulted in fivefold and sixfold increase in duration of anesthesia, respectively, compared to that of Xylocaine® gel.     

Evaluation of Tadalafil Nanosuspensions and Their PEG Solid Dispersion Matrices for Enhancing Its Dissolution Properties

The aim of this work was to prepare and evaluate Tadalafil nanosuspensions and their PEG 4000 solid dispersion matrices to enhance its dissolution rate. Nanosuspensions were prepared by precipitation/ultrasonication technique at 5°C where different stabilizers were screened for stabilization. Nanosuspensions were characterized in terms of particle size and charge. Screening process limited suitable stabilizers into structurally related surfactants composed of a mixture of Tween80 and Span80 at 1:1 ratio (in percent, weight/volume) in adjusted alkaline pH (named TDTSp-OH). The surfactant mixture aided the production of nanosuspensions with an average particle size of 193 ± 8 nm and with short-term stability sufficient for further processing. Solid dispersion matrices made of dried Tadalafil nanosuspensions or dried Tadalafil raw powder suspensions and PEG 4000 as a carrier were prepared by direct compression. Drying was performed via dry heat or via freeze dry. Drug release studies showed that, in general, tablet formulations made of freeze-dried product exhibited faster initial release rates than the corresponding tablets made of oven-dried products which could be attributed to possible larger crystal growth and larger crushing strengths of oven-dried formulations. At best, 60% of drug was released from solid dispersion matrices, while more than 90% of drug was released from TDTSp-OH nanosuspension within the first 5 min. In conclusion, Tadalafil nanosuspensions obtained using a mixed surfactant system provided rapid dissolution rates of Tadalafil that can theoretically enhance its bioavailability.KEY WORDS: nanosuspension, particle size, solid dispersion, stabilizer, tablets, Tadalafil     

Doxorubicin-loaded pH-responsive chitin nanogels for drug delivery to cancer cells

This work deals with preparation of doxorubicin loaded chitin nanogels and were characterized by SEM, DLS and FTIR for cancer drug delivery. The in vitro cytotoxicity studies of 130-160 nm sized doxorubicin loaded chitin nanogels were studied using MTT assay on L929, PC3, MCF-7, A549 and HEPG2 confirmed that relatively higher toxicity on cancer cells comparing to normal L929 cells. The internalization studies showed a significant uptake of doxorubicin loaded chitin nanogels in all the tested cell lines. All the above results indicated that doxorubicin loaded chitin nanogels can be used for prostate, breast, lung and liver cancer.     

Topical Delivery of Fenoprofen Calcium <Emphasis Type="Italic">via</Emphasis> Elastic Nano-vesicular Spanlastics: Optimization Using Experimental Design and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

The aim of this study was to investigate the potential of surfactant-based nanovesicular system (spanlastics) for topical delivery of fenoprofen calcium (FPCa) to eliminate its oral gastrointestinal adverse effects. FPCa-loaded spanlastics were prepared by thin film hydration (TFH) technique according to a full factorial design to investigate the influence of formulation variables on the drug entrapment efficiency (%EE), particle size (PS), deformability index (DI), and the % drug released after 24 h through the cellulose membrane (Q24h) using Design-Expert® software. The optimized formula (composed of Span 60 and Tween 60 as an edge activator at weight ratio of 8: 2 in presence of Transcutol P as a cosolvent in the hydration media) exhibited the highest %EE (49.91 ± 2.60%), PS of 536.1 ± 17.14 nm, DI of 5.07 ± 0.06 g, and Q24h of 61.11 ± 2.70%; it was also characterized for morphology and physical stability. In vitro release study of FPCa-loaded spanlastic gel and conventional FPCa gel through a synthetic membrane and hairless rat skin were evaluated. The skin permeation study revealed that spanlastic gel exhibited both consistent and prolonged action. Finally, the % inhibition of carrageenan-induced rat paw edema of spanlastic gel was three times higher than the conventional FPCa gel after 24 h. In conclusion, spanlastic-based gel could be a great approach for improving topical delivery of fenoprofen calcium, providing both prolonged and enhanced anti-inflammatory activity in the treatment of arthritis.     

Topical Niosome Gel Containing an Anthocyanin Complex: a Potential Oral Wound Healing in Rats

Anthocyanins from dietary sources showing potential benefits as anti-inflammatory in oral lesions were developed as an anthocyanin complex (AC), comprised of extracts of Zea mays (CC) and Clitoria ternatea (CT), and formulated into a niosome gel to prove its topical oral wound healing in vitro and in vivo investigations. The AC formed nano-sized clusters of crystalline-like aggregates, occurring through both intra- and inter-molecular interactions, resulting in delivery depots of anthocyanins, following encapsulation in niosomes and incorporation into a mucoadhesive gel. In vitro permeation of anthocyanins was improved by complexation and further enhanced by encapsulation in niosomes. Collagen production in human gingival fibroblasts was promoted by AC and AC niosomes, but not CC or CT. The in vivo wound healing properties of AC gel (1 and 10%), AC niosome gel (1 and 10%), fluocinolone acetonide gel, and placebo gel were investigated for incisional wounds in the buccal cavities of Wistar rats. AC gel and AC niosome gel both reduced wound sizes after 3 days. AC niosome gel (10%) gave the highest reduction in wound sizes after day 3 (compared to fluocinolone acetonide gel, p?<?0.05), and resulted in 100% wound healing by day 5. Histological observations of cross-sectioned wound tissues revealed the adverse effects of fluocinolone gel and wound healing potential of AC niosome gel. Topical application of AC niosome gel exhibited an anti-inflammatory effect and promoted oral wound closure in rats, possibly due to the improved mucosal permeability and presence of delivery depots of AC in the niosome gel.     

Appraisal of Transdermal Water-in-Oil Nanoemulgel of Selegiline HCl for the Effective Management of Parkinson’s Disease: Pharmacodynamic,Pharmacokinetic, and Biochemical Investigations

In the present study, the potential of transdermal nanoemulsion gel of selegiline hydrochloride for the treatment of Parkinson’s disease was investigated. Water-in-oil nanoemulsions were developed by comparing low- and high-energy methods and were subjected to thermodynamic stability tests, in vitro permeation, and characterization studies. In vitro studies indicated that components of nanoemulsion acted as permeation enhancers with highest flux of 3.531 ± 1.94 μg/cm²/h from nanoemulsion SB6 containing 0.5 mg selegiline hydrochloride, 3% distilled water, 21% S _mix (Span 85, Tween 80, PEG 400), and 76% isopropyl myristate by weight. SB6 with the least droplet size of 183.4 ± 0.35 nm, polydispersity index of 0.42 ± 0.06 with pH of 5.9 ± 0.32 and viscosity of 22.42 ± 0.14 cps was converted to nanoemulsion gel NEGS4 (viscosity = 22,200 ± 400 cps) by addition of Viscup160® for ease of application and evaluated for permeation, safety, and pharmacokinetic profile in Wistar rats. It provided enhancement ratio 3.69 times greater than conventional gel. NEGS4 showed 6.56 and 5.53 times increase in bioavailability in comparison to tablet and conventional gel, respectively, along with sustained effect. Therefore, the developed water-in-oil nanoemulsion gel promises to be an effective vehicle for transdermal delivery of selegiline hydrochloride.     

The Preparation and Evaluation of Water-Soluble SKLB610 Nanosuspensions with Improved Bioavailability

The aim of the study was to investigate the potential of nanosuspension to enhance the bioavailability of SKLB610 (Biopharmaceutical Classification System class II drug), a bioactive anticancer compound synthesized in our labs. SKLB610 nanosuspensions were prepared using wet media milling. Physicochemical characteristics of the nanosuspensions were evaluated, including particle size and distribution, dissolution, transmission electron microscopy, atomic force microscopy, thermogravimetric analysis, and X-ray powder diffractometry. The dissolution rate of SKLB610 was greatly improved in nanosuspensions, compared to crude SKLB610. Pharmacokinetic studies in rats demonstrated that the oral bioavailability of SKLB610 in nanosuspension (89.4%) was 2.6-fold higher than in coarse suspension (34.1%). Stabilizer type, milling time, and milling speed had a significant effect on particle size of the SKLB610 nanosuspensions. Nanosuspensions effectively improved the dissolution rate and bioavailability of the water-insoluble drug SKLB610 by reducing the compound particle size to the nanoscale and employing a proper formulation.     

Nanosuspensions Containing Oridonin/HP-β-Cyclodextrin Inclusion Complexes for Oral Bioavailability Enhancement via Improved Dissolution and Permeability

Chemotherapy via oral route of anticancer drugs offers much convenience and compliance to patients. However, oral chemotherapy has been challenged by limited absorption due to poor drug solubility and intestinal efflux. In this study, we aimed to develop a nanosuspension formulation of oridonin (Odn) using its cyclodextrin inclusion complexes to enhance oral bioavailability. Nanosuspensions containing Odn/2 hydroxypropyl-β-cyclodextrin inclusion complexes (Odn-CICs) were prepared by a solvent evaporation followed by wet media milling technique. The nanosuspensions were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and dissolution. The resulting nanosuspensions were approximately 313.8 nm in particle size and presented a microcrystal morphology. Nanosuspensions loading Odn-CICs dramatically enhanced the dissolution of Odn. Further, the intestinal effective permeability of Odn was markedly enhanced in the presence of 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) and poloxamer. Bioavailability studies showed that nanosuspensions with Odn-CICs can significantly promote the oral absorption of Odn with a relative bioavailability of 213.99% (Odn suspensions as reference). Odn itself possesses a moderate permeability and marginal intestinal metabolism. Thus, the enhanced bioavailability for Odn-CIC nanosuspensions can be attributed to improved dissolution and permeability by interaction with absorptive epithelia and anti-drug efflux. Nanosuspensions prepared from inclusion complexes may be a promising approach for the oral delivery of anticancer agents.     

The Effect of a LYSE Exporter Overexpression on l-Arginine Production in Corynebacterium crenatum

A targeted approach for direct topical antimicrobial delivery involving the formulation of impregnated freeze-dried wafers prepared from a natural polymer has been assessed to consider potential for treatment of wounded skin. The synthetic cationic antimicrobial peptides (CAPs) NP101 and NP108 were found to have modest in vitro activity against bacterial species commonly associated with wound infections. Minimum inhibitory concentration/minimum bactericidal concentrations against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa were found to be 0.31 mg/ml for NP101 and 0.25–0.5 mg/ml for NP108. Rapid, substantial cytoplasmic potassium loss was induced by NP108 in E. coli, but not the other species. Through scanning electron microscopy, both CAPs were observed to alter cell morphology, prevent normal septation, promote cell aggregation and trigger release or formation of extracellular filaments. Wafers harbouring these agents displayed substantial antibacterial activity when assessed by standard diffusion assay. These data confirm that topical delivery of CAPs, through their incorporation within freeze-dried wafer formulations prepared from natural polymers, represents a potential viable approach for treating skin infection.     

Preparation and evaluation of niosome gel containing acyclovir for enhanced dermal deposition

Niosomes suggest a versatile vesicle delivery system with possible transport of drugs via topical route for skin delivery. The aim of the present research was to optimize niosome gel formulation of acyclovir and to evaluate in both in vitro and in vivo rabbit model. Niosome formulations were formulated by coacervation phase separation technique with different ratios of nonionic surfactants, phospholipids and cholesterol using 3² factorial design. Altering the surfactant concentration has influenced the drug entrapment, but not vesicle size. At high surfactant combinations, the acyclovir release from niosomes was strongly influenced by cholesterol:lecithin ratio. Ex vivo drug permeation data indicate substantial difference in flux values and was influenced by the niosome composition. Ex vivo studies using formulation (B₈) for drug deposition indicate greater amount of niosome being diffused into the skin layers and formed a depot, compared to commercial acyclovir cream (control). Two distinct dermatopharmacokinetic profiles were observed, in vivo, for niosome gel formulation (B₈) and control, which were analog to the profiles observed with ex vivo deposition studies. In vivo plasma drug level suggests low systemic exposure of acyclovir (C_max: 9.44?±?2.27?ng/mL and 14.54?±?3.11?ng/mL for niosome formulation and control, respectively). Comparison of kinetic data of acyclovir in the stratum corneum and plasma signifies that the niosome formulation forms a depot in the epidermis or dermis region. This study concludes that the niosome gel formulation (B₈) could be a viable vesicular system for an impressive transdermal delivery of acyclovir by topical application.     

Design,Characterization, and Evaluation of Meloxicam Gel Prepared by Suspension and Solution Polymerization Using Solubility Parameter as the Basis for Development

Meloxicam gel was designed based on the matching of the solubility parameter (δ) of the drug with that of the polymer and subsequently with skin for improved dermal delivery of meloxicam. The δ of meloxicam (11.48 (cal/cm³)^0.5) determined by solubility measurement was matched statistically to the solubility parameter of monomers, n-vinyl-2-pyrrolidone, polyvinyl alcohol (PVA), hydroxyl ethyl methacrylate, ethylene glycol methacrylate (EGMA) determined by intrinsic viscosity measurement. Consequently gels were formulated by polymerization in selected solvent blend of water/ethyl acetate (20:80) in which the drug showed maximum solubility. Thus, F1–F16 formulations designed were evaluated for physicochemical properties, textural analysis, and in vitro drug release. On the basis of optimum characteristics, F2 (PVA, δ = 16.96 (cal/cm³)^0.5) and F8 (EGMA, δ = 18.35 (cal/cm³)^0.5) formulated by suspension polymerization were selected and subjected to skin irritation and topical anti-inflammatory studies. The formulation F8 demonstrated significant (p < 0.05) of anti-inflammatory activity in comparison to marketed piroxicam gel and was free from irritation.     

Influence of Critical Parameters of Nanosuspension Formulation on the Permeability of a Poorly Soluble Drug through the Skin—A Case Study

In transdermal drug delivery systems, it is always a challenge to achieve stable and prolonged high permeation rates across the skin since the concentrations of the drug dissolved in the matrix have to be high in order to maintain zero order release kinetics. Several attempts have been reported to improve the permeability of poorly soluble drug compounds using supersaturated systems. However, due to thermodynamic challenges, there was a high tendency for the drug to nucleate immediately after formulating or even during storage. The present study focuses on the efficiency of nanoparticles and influence of different concentrations of solubilizer such as vitamin E TPGS (d-a-tocopheryl polyethylene glycol 1000 succinate) to improve the permeation rate through the skin. Effects of several formulation factors were studied on the nanosuspension systems using ibuprofen as a model drug. The overall permeation enhancement process through the skin was influenced mostly by the solubilizer and also by the size of nanoparticles. The gel formulation developed with vitamin E TPGS + HPMC nanosuspension, consequently represent a promising approach aiming to improve the permeability performance of a poorly water soluble drug candidate.KEY WORDS: dermal drug delivery, human skin, nanosuspension, permeation rate, porcine skin, vitamin E TPGS     

Development and Evaluation of New Microemulsion-Based Hydrogel Formulations for Topical Delivery of Fluconazole

The aim of the present investigation was to develop and evaluate microemulsion-loaded hydrogels (MEHs) for the topical delivery of fluconazole (FZ). The solubility of FZ in oils, surfactants and cosurfactants was evaluated to identify the components of the microemulsion. The pseudo-ternary phase diagrams were constructed using the novel phase diagram by micro-plate dilution method. Carbopol EDT 2020 was used to convert FZ-loaded microemulsions into gel form without affecting their structure. The selected microemulsions were assessed for globule size, zeta potential and polidispersity index. Besides this, the microemulsion-loaded hydrogel (MEH) formulations were evaluated for drug content, pH, rheological properties and in vitro drug release through synthetic membrane and excised pig ear skin in comparison with a conventional hydrogel. The optimised MEH FZ formulations consisting of FZ 2%, Transcutol P 11.5% and 11%, respectively, as oil phase, Lansurf SML 20-propyleneglycol 52% and 50%, respectively, as surfactant–cosurfactant (2:1), Carbopol EDT 2020 1.5% as gelling agent and water 34.5% and 37%, respectively, showed highest flux values and high release rate values, and furthermore, they had low surfactant content. The in vitro FZ permeation through synthetic membrane and excised pig ear skin from the studied MEHs was best described by the zero-order and first-order models. Finally, the optimised MEH FZ formulations showed similar or slightly higher antifungal activity as compared to that of conventional hydrogel and Nizoral® cream, respectively. The results suggest the potential use of developed MEHs as vehicles for topical delivery of FZ, encouraging further in vitro and in vivo evaluation.KEY WORDS: fluconazole, in vitro skin permeation, microemulsion, microemulsion-loaded hydrogel, topical     

Dual-Drug Delivery System Based on <Emphasis Type="Italic">In Situ</Emphasis> Gel-Forming Nanosuspension of Forskolin to Enhance Antiglaucoma Efficacy

The present study was designed to improve the bioavailability of forskolin by the influence of precorneal residence time and dissolution characteristics. Nanosizing is an advanced approach to overcome the issue of poor aqueous solubility of active pharmaceutical ingredients. Forskolin nanocrystals have been successfully manufactured and stabilized by poloxamer 407. These nanocrystals have been characterized in terms of particle size by scanning electron microscopy and dynamic light scattering. By formulating Noveon AA-1 polycarbophil/poloxamer 407 platforms, at specific concentrations, it was possible to obtain a pH and thermoreversible gel with a pH_gel/T _gel close to eye pH/temperature. The addition of forskolin nanocrystals did not alter the gelation properties of Noveon AA-1 polycarbophil/poloxamer 407 and nanocrystal properties of forskolin. The formulation was stable over a period of 6 months at room temperature. In vitro release experiments indicated that the optimized platform was able to prolong and control forskolin release for more than 5 h. The in vivo studies on dexamethasone-induced glaucomatous rabbits indicated that the intraocular pressure lowering efficacy for nanosuspension/hydrogel systems was 31% and lasted for 12 h, which is significantly better than the effect of traditional eye suspension (18%, 4–6 h). Hence, our investigations successfully prove that the pH and thermoreversible polymeric in situ gel-forming nanosuspension with ability of controlled drug release exhibits a greater potential for glaucoma therapy.     

Thermo-sensitivity and triggered drug release of polysaccharide nanogels derived from pullulan-g-poly(l-lactide) copolymers

Thermo-responsive nanogels from poly(l-lactide)-g-pullulan (PLP1 and 2) copolymers with different lactide contents were investigated as an anticancer drug delivery carrier. The phase transition temperature of PLP 1 with lower lactide content in distilled water showed around 35 °C. Upon adding 0.15 M NaCl to PLP 1, a significant difference in the transmittance was observed when comparing the non-additive salt condition. The total amount of released doxorubicin (DOX) from the DOX-loaded PLP nanogels increased with increasing temperature for 50 h. A noticeable difference in the initial release by PLP 1 was observed between 37 and 42 °C. In the 50% inhibitory concentration (IC₅₀) analysis, the IC₅₀ values of DOX released from PLP 1 were approximately 5.9 and 9.3 μg/mL at 37 and 42 °C, respectively. The results suggest that self-assembled PLP nanogels, by means of a triggering temperature, can be used as a long-term drug delivery system in cancer treatments.     

Nanocrystallization by Evaporative Antisolvent Technique for Solubility and Bioavailability Enhancement of Telmisartan

Telmisartan is an orally active nonpeptide angiotensin II receptor antagonist used in the management of hypertension. It is a Biopharmaceutics Classification System class II drug having aqueous solubility of 9.9 μg/ml. Telmisartan (TEL) nanocrystals were prepared by evaporative antisolvent precipitation technique using different stabilizers as PVPK30, TPGS, Poloxamer 188, and PEG 6000 in combination or singly. The nanosuspensions were characterized in terms of particle size distribution, zeta potential, and polydispersity index. The suspension containing PVPK30 and TPGS (1:1) showed least average particle size of 82.63 nm and polydispersity index of 0.472. The zeta potential of nanosuspensions ranged between 6.54 and 10.8 mV. An increase of 116.45% was evident in the specific surface area of the freeze-dried product. Contact angle of nanoparticles was also lowered to 27° as compared to 50.8° for TEL. Saturation solubility studies in various media revealed a significant increase in comparison to plain drug. An increase of 3.74× in saturation solubility in FaSSIF and 5.02× in FeSSIF was seen. In vitro dissolution profile of nanosuspension coated on pellets revealed release of 85% in water, 95% in 0.1 N HCl, and 75% in phosphate buffer in 30 min. Nanosuspensions were found to be stable in the presence of univalent and bivalent electrolytes. A tenfold increase in bioavailability was evident. Nanoparticles of telmisartan prepared by bottom-up technique proved to be effective in improving the oral bioavailability as a result of enhanced solubility and dissolution rate.Key words: biorelevant media, contact angle, specific surface area, telmisartan, TPGS