Subunit arrangement in V-ATPase from Thermus thermophilus

The V0V1-ATPase of Thermus thermophilus catalyzes ATP synthesis coupled with proton translocation. It consists of an ATPase-active V1 part (ABDF) and a proton channel V0 part (CLEGI), but the arrangement of each subunit is still largely unknown. Here we found that acid treatment of V0V1-ATPase induced its dissociation into two subcomplexes, one with subunit composition ABDFCL and the other with EGI. Exposure of the isolated V0 to acid or 8 m urea also produced two subcomplexes, EGI and CL. Thus, the C subunit (homologue of d subunit, yeast Vma6p) associates with the L subunit ring tightly, and I (homologue of 100-kDa subunit, yeast Vph1p), E, and G subunits constitute a stable complex. Based on these observations and our recent demonstration that D, F, and L subunits rotate relative to A3B3 (Imamura, H., Nakano, M., Noji, H., Muneyuki, E., Ohkuma, S., Yoshida, M., and Yokoyama, K. (2003) Proc. Natl. Acad. Sci. U. S. A. 100, 2312-2315; Yokoyama, K., Nakano, M., Imamura, H., Yoshida, M., and Tamakoshi, M. (2003) J. Biol. Chem. 278, 24255-24258), we propose that C, D, F, and L subunits constitute the central rotor shaft and A, B, E, G, and I subunits comprise the surrounding stator apparatus in the V0V1-ATPase.     

Function and subunit interactions of the N-terminal domain of subunit a (Vph1p) of the yeast V-ATPase

The vacuolar (H+)-ATPases (V-ATPases) are ATP-dependent proton pumps that operate by a rotary mechanism in which ATP hydrolysis drives rotation of a ring of proteolipid subunits relative to subunit a within the integral V(0) domain. In vivo dissociation of the V-ATPase (an important regulatory mechanism) generates a V(0) domain that does not passively conduct protons. EM analysis indicates that the N-terminal domain of subunit a approaches the rotary subunits in free V(0), suggesting a possible mechanism of silencing passive proton transport. To test the hypothesis that the N-terminal domain inhibits passive proton flux by preventing rotation of the proteolipid ring in free V(0), factor Xa cleavage sites were introduced between the N- and C-terminal domains of subunit a (the Vph1p isoform in yeast) to allow its removal in vitro after isolation of vacuolar membranes. The mutant Vph1p gave rise to a partially uncoupled V-ATPase complex. Cleavage with factor Xa led to further loss of coupling of proton transport and ATP hydrolysis. Removal of the N-terminal domain by cleavage with factor Xa and treatment with KNO3 and MgATP did not, however, lead to an increase in passive proton conductance by free V(0), suggesting that removal of the N-terminal domain is not sufficient to facilitate passive proton conductance through V(0). Photoactivated cross-linking using the cysteine reagent maleimido benzophenone and single cysteine mutants of subunit a demonstrated the proximity of specific sites within the N-terminal domain and subunits E and G of the peripheral stalk. These results suggest that a localized region of the N-terminal domain (residues 347-369) is important in anchoring the peripheral stator in V1V0.     

Role of Vma21p in assembly and transport of the yeast vacuolar ATPase

The Saccharomyces cerevisiae vacuolar H+-ATPase (V-ATPase) is a multisubunit complex composed of a peripheral membrane sector (V1) responsible for ATP hydrolysis and an integral membrane sector (V0) required for proton translocation. Biogenesis of V0 requires an endoplasmic reticulum (ER)-localized accessory factor, Vma21p. We found that in vma21Delta cells, the major proteolipid subunit of V0 failed to interact with the 100-kDa V0 subunit, Vph1p, indicating that Vma21p is necessary for V0 assembly. Immunoprecipitation of Vma21p from wild-type membranes resulted in coimmunoprecipitation of all five V0 subunits. Analysis of vmaDelta strains showed that binding of V0 subunits to Vma21p was mediated by the proteolipid subunit Vma11p. Although Vma21p/proteolipid interactions were independent of Vph1p, Vma21p/Vph1p association was dependent on all other V0 subunits, indicating that assembly of V0 occurs in a defined sequence, with Vph1p recruitment into a Vma21p/proteolipid/Vma6p complex representing the final step. An in vitro assay for ER export was used to demonstrate preferential packaging of the fully assembled Vma21p/proteolipid/Vma6p/Vph1p complex into COPII-coated transport vesicles. Pulse-chase experiments showed that the interaction between Vma21p and V0 was transient and that Vma21p/V0 dissociation was concomitant with V0/V1 assembly. Blocking ER export in vivo stabilized the interaction between Vma21p and V0 and abrogated assembly of V0/V1. Although a Vma21p mutant lacking an ER-retrieval signal remained associated with V0 in the vacuole, this interaction did not affect the assembly of vacuolar V0/V1 complexes. We conclude that Vma21p is not involved in regulating the interaction between V0 and V1 sectors, but that it has a crucial role in coordinating the assembly of V0 subunits and in escorting the assembled V0 complex into ER-derived transport vesicles.     

The structure of the central stalk in bovine F(1)-ATPase at 2.4 A resolution

The central stalk in ATP synthase, made of gamma, delta and epsilon subunits in the mitochondrial enzyme, is the key rotary element in the enzyme's catalytic mechanism. The gamma subunit penetrates the catalytic (alpha beta)(3) domain and protrudes beneath it, interacting with a ring of c subunits in the membrane that drives rotation of the stalk during ATP synthesis. In other crystals of F(1)-ATPase, the protrusion was disordered, but with crystals of F(1)-ATPase inhibited with dicyclohexylcarbodiimide, the complete structure was revealed. The delta and epsilon subunits interact with a Rossmann fold in the gamma subunit, forming a foot. In ATP synthase, this foot interacts with the c-ring and couples the transmembrane proton motive force to catalysis in the (alpha beta)(3) domain.     

Chromosomal localization of three vacuolar-H+ -ATPase 16 kDa subunit (ATP6V0C) genes in the murine genome

Vacuolar-H(+)-ATPase (V-H-ATPase) is a large multimeric protein composed of at least 12 distinct subunits. The 16-kDa hydrophobic proteolipid subunit (ATP6V0C; ATPase, H(+ )transporting, lysosomal 16 kDa, V0 subunit C) plays a central role in H(+) transport across cellular membranes. We have mapped three ATP6V0C genes (Atp6v0c, Atp6v0c-ps1 and Atp6voc-ps2) in the murine genome. Atp6v0c-ps1 and Atp6v0c-ps2 map to Chromosomes 7 and 6, respectively. Atp6v0c maps to Chromosome 17, closely linked to the Tsc2 locus and D17Mit55. This region of Chromosome 17 in mouse is homologous with chromosome 16 in human where the ATP6V0C gene is localized.     

Structure and regulation of the vacuolar ATPases

The vacuolar (H(+))-ATPases (V-ATPases) are ATP-dependent proton pumps responsible for both acidification of intracellular compartments and, for certain cell types, proton transport across the plasma membrane. Intracellular V-ATPases function in both endocytic and intracellular membrane traffic, processing and degradation of macromolecules in secretory and digestive compartments, coupled transport of small molecules such as neurotransmitters and ATP and in the entry of pathogenic agents, including envelope viruses and bacterial toxins. V-ATPases are present in the plasma membrane of renal cells, osteoclasts, macrophages, epididymal cells and certain tumor cells where they are important for urinary acidification, bone resorption, pH homeostasis, sperm maturation and tumor cell invasion, respectively. The V-ATPases are composed of a peripheral domain (V(1)) that carries out ATP hydrolysis and an integral domain (V(0)) responsible for proton transport. V(1) contains eight subunits (A-H) while V(0) contains six subunits (a, c, c', c', d and e). V-ATPases operate by a rotary mechanism in which ATP hydrolysis within V(1) drives rotation of a central rotary domain, that includes a ring of proteolipid subunits (c, c' and c'), relative to the remainder of the complex. Rotation of the proteolipid ring relative to subunit a within V(0) drives active transport of protons across the membrane. Two important mechanisms of regulating V-ATPase activity in vivo are reversible dissociation of the V(1) and V(0) domains and changes in coupling efficiency of proton transport and ATP hydrolysis. This review focuses on recent advances in our lab in understanding the structure and regulation of the V-ATPases.     

Proton translocation driven by ATP hydrolysis in V-ATPases

The vacuolar H(+)-ATPases (or V-ATPases) are a family of ATP-dependent proton pumps responsible for acidification of intracellular compartments and, in certain cases, proton transport across the plasma membrane of eukaryotic cells. They are multisubunit complexes composed of a peripheral domain (V(1)) responsible for ATP hydrolysis and an integral domain (V(0)) responsible for proton translocation. Based upon their structural similarity to the F(1)F(0) ATP synthases, the V-ATPases are thought to operate by a rotary mechanism in which ATP hydrolysis in V(1) drives rotation of a ring of proteolipid subunits in V(0). This review is focused on the current structural knowledge of the V-ATPases as it relates to the mechanism of ATP-driven proton translocation.     

Dopamine release via the vacuolar ATPase V0 sector c-subunit,confirmed in N18 neuroblastoma cells,results in behavioral recovery in hemiparkinsonian mice

A 16-kDa proteolipid, mediatophore, in Torpedo electric organs mediates Ca²⁺-dependent acetylcholine release. Mediatophore is identical to the pore-forming stalk c-subunit of the V0 sector of vacuolar proton ATPase (ATP6V0C). The function of ATP6V0C in the mammalian central nervous system is not clear. Here, we report transfection of adeno-associated viral vectors harboring rat ATP6V0C into the mouse substantia nigra, in which high potassium stimulation increased overflow of endogenous dopamine (DA) measured in the striatum by in vivo microdialysis. Next, in the striatum of 6-hydroxydopamine-lesioned mice, a model of Parkinson’s disease (PD), human tyrosine hydroxylase, aromatic l-amino-acid decarboxylase and guanosine triphosphate cyclohydrolase 1, together with or without ATP6V0C, were expressed in the caudoputamen for rescue. Motor performance on the accelerating rotarod test and amphetamine-induced ipsilateral rotation were improved in the rescued mice coexpressing ATP6V0C. [³H]DA, taken up into cultured N18 neuronal tumor cells transformed to express ATP6V0C, was released by potassium stimulation. These results indicated that ATP6V0C mediates DA release from nerve terminals in the striatum of DA neurons of normal mice and from gene-transferred striatal cells of parkinsonian mice. The results suggested that ATP6V0C may be useful as a rescue molecule in addition to DA-synthetic enzymes in the gene therapy of PD.     

The V-ATPase proteolipid cylinder promotes the lipid-mixing stage of SNARE-dependent fusion of yeast vacuoles

The V-ATPase V(0) sector associates with the peripheral V(1) sector to form a proton pump. V(0) alone has an additional function, facilitating membrane fusion in the endocytic and late exocytic pathways. V(0) contains a hexameric proteolipid cylinder, which might support fusion as proposed in proteinaceous pore models. To test this, we randomly mutagenized proteolipids. We recovered alleles that preserve proton translocation, normal SNARE activation and trans-SNARE pairing but that impair lipid and content mixing. Critical residues were found in all subunits of the proteolipid ring. They concentrate within the bilayer, close to the ring subunit interfaces. The fusion-impairing proteolipid substitutions stabilize the interaction of V(0) with V(1). Deletion of the vacuolar v-SNARE Nyv1 has the same effect, suggesting that both types of mutations similarly alter the conformation of V(0). Also covalent linkage of subunits in the proteolipid cylinder blocks vacuole fusion. We propose that a SNARE-dependent conformational change in V(0) proteolipids might stimulate fusion by creating a hydrophobic crevice that promotes lipid reorientation and formation of a lipidic fusion pore.     

Reconstitution in vitro of V1 complex of Thermus thermophilus V-ATPase revealed that ATP binding to the A subunit is crucial for V1 formation

Vacuolar-type H(+)-ATPase (V-ATPase or V-type ATPase) is a multisubunit complex comprised of a water-soluble V(1) complex, responsible for ATP hydrolysis, and a membrane-embedded V(o) complex, responsible for proton translocation. The V(1) complex of Thermus thermophilus V-ATPase has the subunit composition of A(3)B(3)DF, in which the A and B subunits form a hexameric ring structure. A central stalk composed of the D and F subunits penetrates the ring. In this study, we investigated the pathway for assembly of the V(1) complex by reconstituting the V(1) complex from the monomeric A and B subunits and DF subcomplex in vitro. Assembly of these components into the V(1) complex required binding of ATP to the A subunit, although hydrolysis of ATP is not necessary. In the absence of the DF subcomplex, the A and B monomers assembled into A(1)B(1) and A(3)B(3) subcomplexes in an ATP binding-dependent manner, suggesting that ATP binding-dependent interaction between the A and B subunits is a crucial step of assembly into V(1) complex. Kinetic analysis of assembly of the A and B monomers into the A(1)B(1) heterodimer using fluorescence resonance energy transfer indicated that the A subunit binds ATP prior to binding the B subunit. Kinetics of binding of a fluorescent ADP analog, N-methylanthraniloyl ADP (mant-ADP), to the monomeric A subunit also supported the rapid nucleotide binding to the A subunit.     

Purification and functional properties of the DCCD-reactive proteolipid subunit of the H+-translocating ATPase from Mycobacterium phlei

Interaction of N,N'-dicyclohexylcarbodiimide (DCCD) with ATPase of Mycobacterium phlei membranes results in inactivation of ATPase activity. The rate of inactivation of ATPase was pseudo-first order for the initial 30-65% inactivation over a concentration range of 5-50 microM DCCD. The second-order rate constant of the DCCD-ATPase interaction was k = 8.5 X 10(5) M-1 X min(-1). The correlation between the initial binding of [14C]DCCD and 100% inactivation of ATPase activity shows 1.57 nmol DCCD bound per mg membrane protein. The proteolipid subunit of the F0F1-ATPase complex in membranes of M. phlei with which DCCD covalently reacts to inhibit ATPase was isolated by labeling with [14C]DCCD. The proteolipid was purified from the membrane in free and DCCD-modified form by extraction with chloroform/methanol and subsequent chromatography on Sephadex LH-20. The polypeptide was homogeneous on SDS-acrylamide gel electrophoresis and has an apparent molecular weight of 8000. The purified proteolipid contains phosphatidylinositol (67%), phosphatidylethanolamine (18%) and cardiolipin (8%). Amino acid analysis indicates that glycine, alanine and leucine were present in elevated amounts, resulting in a polarity of 27%. Cysteine and tryptophan were lacking. Butanol-extracted proteolipid mediated the translocation of protons across the bilayer, in K+-loaded reconstituted liposomes, in response to a membrane potential difference induced by valinomycin. The proton translocation was inhibited by DCCD, as measured by the quenching of fluorescence of 9-aminoacridine. Studies show that vanadate inhibits the proton gradient driven by ATP hydrolysis in membrane vesicles of M. phlei by interacting with the proteolipid subunit sector of the F0F1-ATPase complex.     

Mitochondrial ATP synthase complex. Membrane topography and stoichiometry of the F0 subunits.

The topography of the subunits of the membrane sector F0 of the ATP synthase complex in the bovine mitochondrial inner membrane was studied with the help of subunit-specific antibodies raised to the F0 subunits b, d, 6, F6, A6L, OSCP (oligomycin-sensitivity-conferring protein), and N,N' -dicyclohexylcarbodiimide (DCCD)-binding proteolipid and to the ATPase inhibitor protein (IF1) as an internal control. Exposure of F0 subunits in inverted and right-side-out inner membranes was investigated by direct antibody binding as well as by susceptibility of these subunits to degradation by various proteases as monitored by gel electrophoresis of the membrane digests and immunoblotting with the subunit-specific antibodies. Results show that subunits b, d, F6, A6L (including its C-terminal end) and OSCP were exposed on the matrix side. Sufficient masses of these subunits to recognize antibodies or undergo proteolysis were not exposed on the cytosolic side. This was also the case for subunit 6 and the DCCD-binding proteolipid on either side of the inner membrane. Quantitative immunoblotting in which bound radio-activity from [125I]protein A was employed to estimate the concentration of an antigen in a sample allowed the determination of the stoichiometry of several F0 subunits and IF1 relative to F1-ATPase. Results showed that per mol of F1 there are in bovine heart mitochondria 1 mol each of d, OSCP, and IF1, and 2 mol each of b and F6. Subunit 6 and the DCCD-binding proteolipid could not be quantitated, because the former transferred poorly to nitrocellulose and the latter's antibody did not bind [125I]protein A.     

Structure and subunit arrangement of the A-type ATP synthase complex from the archaeon Methanococcus jannaschii visualized by electron microscopy

In Archaea, bacteria, and eukarya, ATP provides metabolic energy for energy-dependent processes. It is synthesized by enzymes known as A-type or F-type ATP synthase, which are the smallest rotatory engines in nature (Yoshida, M., Muneyuki, E., and Hisabori, T. (2001) Nat. Rev. Mol. Cell. Biol. 2, 669-677; Imamura, H., Nakano, M., Noji, H., Muneyuki, E., Ohkuma, S., Yoshida, M., and Yokoyama, K. (2003) Proc. Natl. Acad. Sci. U. S. A. 100, 2312-2315). Here, we report the first projected structure of an intact A(1)A(0) ATP synthase from Methanococcus jannaschii as determined by electron microscopy and single particle analysis at a resolution of 1.8 nm. The enzyme with an overall length of 25.9 nm is organized in an A(1) headpiece (9.4 x 11.5 nm) and a membrane domain, A(0) (6.4 x 10.6 nm), which are linked by a central stalk with a length of approximately 8 nm. A part of the central stalk is surrounded by a horizontal-situated rodlike structure ("collar"), which interacts with a peripheral stalk extending from the A(0) domain up to the top of the A(1) portion, and a second structure connecting the collar structure with A(1). Superposition of the three-dimensional reconstruction and the solution structure of the A(1) complex from Methanosarcina mazei G?1 have allowed the projections to be interpreted as the A(1) headpiece, a central and the peripheral stalk, and the integral A(0) domain. Finally, the structural organization of the A(1)A(0) complex is discussed in terms of the structural relationship to the related motors, F(1)F(0) ATP synthase and V(1)V(0) ATPases.     

Stator structure and subunit composition of the V(1)/V(0) Na(+)-ATPase of the thermophilic bacterium Caloramator fervidus

The V-type Na(+)-ATPase of the thermophilic, anaerobic bacterium Caloramator fervidus was purified to homogeneity. The subunit compositions of the catalytic V(1) and membrane-embedded V(0) parts were determined and the structure of the enzyme complex was studied by electron microscopy. The V(1) headpiece consists of seven subunits present in one to three copies, and the V(0) part of two subunits in a ratio of 5:2. An analysis of over 7500 single particle images obtained by electron microscopy of the purified V(1)V(0) enzyme complex revealed that the stalk region, connecting the V(1) and V(0) parts, contains two peripheral stalks in addition to a central stalk. One of the two is connected to the V(0) part, while the other is connected to the first via a bar-like structure that is positioned just above V(0), parallel with the plane of the membrane. In projection, this bar seems to contact the central stalk. The data show that the stator structure that prevents rotation of the static part of V(0) relative to V(1) in the rotary catalysis mechanism of energy coupling in ATPases/ATPsynthases is more complex than previously thought.     

The 40-kDa subunit enhances but is not required for activity of the coated vesicle proton pump.

We have previously demonstrated reassembly of a functional vacuolar (H+)-ATPase from clathrin-coated vesicles using the dissociated peripheral domain (V1) and the membrane-bound integral domain (V0) (Puopolo, K., and Forgac, M. (1990) J. Biol. Chem. 265, 14836-14841). We have used this reassembly procedure to test the function of the 40-kDa subunit of the coated vesicle (H+)-ATPase. In the absence of V0, a fraction of the peripheral subunits reassemble into a V1 subcomplex which contains the 73-kDa A subunit, the 58-kDa B subunit, and the 34- and 33-kDa subunits but lacks the 40-kDa subunit. This subcomplex, which sediments with a mass of approximately 500 kDa, can be separated from the remaining monomeric subunits (and the 40-kDa subunit) by density gradient sedimentation. When dissociated with 0.36 M KI, 2.5 mM ATP, and 2.5 mM MgSO4, and added to membranes from which V1 has been dissociated, this V1(-40 kDa) subcomplex is able to reassemble with V0 to give a (H+)-ATPase with a proton pumping activity approximately half that obtained in the presence of the 40-kDa subunit. The undissociated subcomplex is not competent for assembly of a functional (H+)-ATPase. Interestingly, the monomeric fraction obtained from density gradient sedimentation contains the 40-kDa subunit but lacks the 34-kDa subunit. This monomeric fraction is nevertheless also able to assemble with V0 to give a functional proton pump. The V1V0 complexes assembled in the absence of either the 40- or 34-kDa subunits, while active, are not stable to detergent solubilization and immunoprecipitation, suggesting that both of these subunits play a role in stabilization of the (H+)-ATPase complex. Evidence for interaction between the 40- and 33-kDa subunits is also presented.     

Inverse regulation of rotation of F1-ATPase by the mutation at the regulatory region on the gamma subunit of chloroplast ATP synthase

In F1-ATPase, the rotation of the central axis subunit gamma relative to the surrounding alpha3beta3 subunits is coupled to ATP hydrolysis. We previously reported that the introduced regulatory region of the gamma subunit of chloroplast F1-ATPase can modulate rotation of the gamma subunit of the thermophilic bacterial F1-ATPase (Bald, D., Noji, H., Yoshida, M., Hirono-Hara, Y., and Hisabori, T. (2001) J. Biol. Chem. 276, 39505-39507). The attenuated enzyme activity of this chimeric enzyme under oxidizing conditions was characterized by frequent and long pauses of rotation of gamma. In this study, we report an inverse regulation of the gamma subunit rotation in the newly engineered F1-chimeric complex whose three negatively charged residues Glu210-Asp211-Glu212 adjacent to two cysteine residues of the regulatory region derived from chloroplast F1-ATPase gamma were deleted. ATP hydrolysis activity of the mutant complex was stimulated up to 2-fold by the formation of the disulfide bond at the regulatory region by oxidation. We successfully observed inverse redox switching of rotation of gamma using this mutant complex. The complex exhibited long and frequent pauses in its gamma rotation when reduced, but the rotation rates between pauses remained unaltered. Hence, the suppression or activation of the redox-sensitive F1-ATPase can be explained in terms of the change in the rotation behavior at a single molecule level. These results obtained by the single molecule analysis of the redox regulation provide further insights into the regulation mechanism of the rotary enzyme.     

A gene encoding the proteolipid subunit of Sulfolobus acidocaldarius ATPase complex

An analysis of genes for the major two subunits of the membrane-associated ATPase from an acidothermophilic archaebacterium, Sulfolobus acidocaldarius, suggested that it belongs to a different ATPase family from the F1-ATPase (Denda, K., Konishi, J., Oshima, T., Date, T., and Yoshida, M. (1988) J. Biol. Chem. 263, 17251-17254). In the same operon of the above two genes we found a gene encoding a very hydrophobic protein of 101 amino acids (Mr = 10,362). A proteolipid was purified from the membranes of this bacteria in which partial amino acid sequences matched with the sequence deduced from the gene. Significant amino acid sequence homology and a similar hydropathy profile appeared when the sequence was compared with the 8-kDa proteolipid subunit of F0F1-ATPases. It is about 30 amino acids larger than the 8-kDa proteolipid and has a small (11-amino acid) repeat sequence. However, it is distinct from the 16-kDa proteolipid subunit of an eukaryotic vacuolar H+-ATPase (Mandel, M., Moriyama, Y., Hulmes, J.D., Pan, Y.-E., Nelson, H., and Nelson, N. (1988) Proc. Natl. Acad. Sci. U.S.A. 85,5521-5524).     

The E and G subunits of the yeast V-ATPase interact tightly and are both present at more than one copy per V1 complex

The E and G subunits of the yeast V-ATPase are believed to be part of the peripheral or stator stalk(s) responsible for physically and functionally linking the peripheral V1 sector, responsible for ATP hydrolysis, to the membrane V0 sector, containing the proton pore. The E and G subunits interact tightly and specifically, both on a far Western blot of yeast vacuolar proteins and in the yeast two-hybrid assay. Amino acids 13-79 of the E subunit are critical for the E-G two-hybrid interaction. Different tagged versions of the G subunit were expressed in a diploid cell, and affinity purification of cytosolic V1 sectors via a FLAG-tagged G subunit resulted in copurification of a Myc-tagged G subunit, implying more than one G subunit was present in each V1 complex. Similarly, hemagglutinin-tagged E subunit was able to affinity-purify V1 sectors containing an untagged version of the E subunit from heterozygous diploid cells, suggesting that more than one E subunit is present. Overexpression of the subunit G results in a destabilization of subunit E similar to that seen in the complete absence of subunit G (Tomashek, J. J., Graham, L. A., Hutchins, M. U., Stevens, T. H., and Klionsky, D. J. (1997) J. Biol. Chem. 272, 26787-26793). These results are consistent with recent models showing at least two peripheral stalks connecting the V1 and V0 sectors of the V-ATPase and would allow both stalks to be based on an EG dimer.     

Evidence that the NH2 terminus of vph1p, an integral subunit of the V0 sector of the yeast V-ATPase, interacts directly with the Vma1p and Vma13p subunits of the V1 sector

The vacuolar-type H(+)-ATPase (V-ATPase) is composed of a peripherally bound (V(1)) and a membrane-associated (V(0)) complex. V(1) ATP hydrolysis is thought to rotate a central stalk, which in turn, is hypothesized to drive V(0) proton translocation. Transduction of torque exerted by the rotating stalk on V(0) requires a fixed structural link (stator) between the complexes to prevent energy loss through futile rotation of V(1) relative to V(0); this work sought to identify stator components. The 95-kDa V-ATPase subunit, Vph1p, has a cytosolic NH(2) terminus (Nt-Vph1p) and a membrane-associated COOH terminus. Two-hybrid assays demonstrated that Nt-Vph1p interacts with the catalytic V(1) subunit, Vma1p. Co-immunoprecipitation of Vma1p with Nt-Vph1p confirmed the interaction. Expression of Nt-Vph1p in a Deltavph1 mutant was necessary to recruit Vma13p to V(1). Vma13p bound to Nt-Vph1p in vitro demonstrating direct interaction. Limited trypsin digests cleaves both Nt-Vph1p and Vma13p. The same tryptic treatment results in a loss of proton translocation while not reducing bafilomycin A(1)-sensitive ATP hydrolysis. Trypsin cleaved Vph1p at arginine 53. Elimination of the tryptic cleavage site by substitution of arginine 53 to serine partially protected vacuolar acidification from trypsin digestion. These results suggest that Vph1p may function as a component of a fixed structural link, or stator, coupling V(1) ATP hydrolysis to V(0) proton translocation.