Factors Affecting Autocatalysis of Botulinum A Neurotoxin Light Chain*

The light chain of botulinum neurotoxin serotype A undergoes autocatalytic fragmentation into two major peptides during purification and storage (Ahmed S. A. et al. 2001, J. Protein Chem. 20:221–231) by both intermolecular and intramolecular mechanisms (Ahmed S. A. etal. 2003, Biochemistry 42:12539–12549). In this study, we investigated the effects of buffers and salts on this autocatalytic reaction in the presence and absence of zinc chloride. In the presence of zinc chloride, the fragmentation reaction was enhanced in each of acetate, MES, HEPES and phosphate buffers with maximum occurring in acetate when compared to those in the absence of zinc chloride. Adding sodium chloride in phosphate buffer in the presence of zinc chloride increased the extent of proteolysis. Irrespective of the presence of zinc chloride, adding sodium chloride or potassium chloride in phosphate buffer elicited an additional proteolytic reaction. Higher concentrations of sodium phosphate buffer enhanced the autocatalytic reaction in the absence of zinc chloride. In contrast, in the presence of zinc chloride, higher concentrations of sodium phosphate decreased the autocatalytic reaction. Optimum pH of autocatalysis was not affected significantly by the absence or presence of zinc chloride. Like zinc chloride, other chlorides of divalent metals, such as magnesium, cobalt, iron and calcium also enhanced the autocatalytic reaction. Polyols such as ethylene glycol protected the light chain from fragmentation. Exposure of light chain to UV radiation led to enhanced fragmentation. In order to avoid fragmentation, the protein should be stored frozen in a low concentration buffer of neutral or higher pH devoid of any metal. Our results provide a choice of buffers and salts for isolation, purification and storage of intact botulinum neurotoxin serotype A light chain.     

Enzymatic autocatalysis of botulinum A neurotoxin light chain

Highly purified recombinant zinc-endopeptidase light chain of the botulinum neurotoxin serotype A underwent autocatalytic proteolytic processing and fragmentation. In the absence of added zinc, initially 10-28 residues were cleaved from the C-terminal end of the 448-residue protein followed by the appearance of an SDS-stable dimer and finally fragmentation near the middle of the molecule. In the presence of added zinc, the rate of fragmentation was accelerated but the specificity of the cleavable bond changed, suggesting a structural role for zinc in the light chain. The C-terminal proteolytic processing was reduced, and fragmentation near the middle of the molecule was prevented by adding the metal chelator TPEN to the light chain. Similarly, adding a competitive peptide inhibitor (CRATKML) of the light-chain catalytic activity also greatly reduced the proteolysis. With these results, for the first time, we provide clear evidence that the loss of C-terminal peptides and fragmentation of the light chain are enzymatic and autocatalytic. By isolating both the large and small peptides, we sequenced them by Edman degradation and ESIMS-MS, and mapped the sites of proteolysis. We also found that proteolysis occurred at F266-G267, F419-T420, F423-E424, R432-G433, and C430-V431 bonds in addition to the previously reported Y250-Y251 and K438-T439 bonds.     

The metalloprotease of Listeria monocytogenes is regulated by pH

Listeria monocytogenes is an intracytosolic bacterial pathogen. Among the factors contributing to escape from vacuoles are a phosphatidylcholine phospholipase C (PC-PLC) and a metalloprotease (Mpl). Both enzymes are translocated across the bacterial membrane as inactive proproteins, whose propeptides serve in part to maintain them in association with the bacterium. We have shown that PC-PLC maturation is regulated by Mpl and pH and that Mpl maturation occurs by autocatalysis. In this study, we tested the hypothesis that Mpl activity is pH regulated. To synchronize the effect of pH on bacteria, the cytosolic pH of infected cells was manipulated immediately after radiolabeling de novo-synthesized bacterial proteins. Immunoprecipitation of secreted Mpl from host cell lysates revealed the presence of the propeptide and catalytic domain in samples treated at pH 6.5 but not at pH 7.3. The zymogen was present in small amounts under all conditions. Since proteases often remain associated with their respective propeptide following autocatalysis, we aimed at determining whether pH regulates autocatalysis or secretion of the processed enzyme. For this purpose, we used an Mpl construct that contains a Flag tag at the N terminus of its catalytic domain and antibodies that can distinguish N-terminal and non-N-terminal Flag. By fluorescence microscopy, we observed the Mpl zymogen associated with the bacterium at physiological pH but not following acidification. Mature Mpl was not detected in association with the bacterium at either pH. Using purified proteins, we determined that processing of the PC-PLC propeptide by mature Mpl is also pH sensitive. These results indicate that pH regulates the activity of Mpl on itself and on PC-PLC.     

An autocatalytic step in the reaction cycle of hydrogenase from Thiocapsa roseopersicina can explain the special characteristics of the enzyme reaction

A moving front has been observed as a special pattern during the hydrogenase-catalyzed reaction of hydrogen uptake with benzyl viologen as electron acceptor in a thin-layer reaction chamber. Such fronts start spontaneously and at random times at different points of the reaction chamber; blue spheres are seen expanding at constant speed and amplitude. The number of observable starting points depends on the hydrogenase concentration. Fronts can be initiated by injecting either a small amount of completed reaction mixture or activated hydrogenase, but not by injecting a low concentration of reduced benzyl viologen. These characteristics are consistent with an autocatalytic reaction step in the enzyme reaction. The special characteristics of the hydrogen-uptake reaction in the bulk reaction (a long lag phase, and the enzyme concentration dependence of the lag phase) support the autocatalytic nature. We conclude that there is at least one autocatalytic reaction step in the hydrogenase-catalyzed reaction. The two possible autocatalytic schemes for hydrogenase are prion-type autocatalysis, in which two enzyme forms interact, and product-activation autocatalysis, where a reduced electron acceptor and an inactive enzyme form interact. The experimental results strongly support the occurrence of prion-type autocatalysis.     

Properties of myosin light chain kinase prepared from rabbit skeletal muscle by an improved method

Myosin light chain kinase was prepared from rabbit skeletal muscle. DEAE-Sephadex, calmodulin-Sepharose 4B affinity gel and Ultrogel AcA 34 were used for the purification. It took 3 days for the preparation, and 6.2 mg of myosin light chain kinase was isolated from 600 g of frozen muscle. The molecular weight of the myosin light chain kinase estimated by sedimentation equilibrium analysis was 103,000 +/- 4,100. The isoelectric point was 5.0. Chemical modification of cysteine residues did not affect the catalytic activity, but modification of tyrosine residues diminished the activity. In order to activate myosin light chain kinase, it was necessary to bind calmodulin in an equimolar ratio and the dissociation constant was estimated to be 3.6 nM. The optimum pH for the catalytic activity was 7.5, and the activity was inhibited by NaCl and KCl. In the presence of 2.74 mg/ml myosin light chain and 75 mM KCl, the catalytic activity was found to be 88 s-1. The Vm and Km at 0.14 M KCl were 100 s-1 and 53 microM, respectively, for the isolated light chain as substrate and 70-80 s-1 and 19 microM for myosin as substrate.     

A functionally active heavy chain derived from human high molecular weight urokinase

Human high molecular weight urokinase, a plasminogen activator, when minimally reduced with 0.01 M 2-mercaptoethanol for 10 h at pH 8.0 and 25 degrees C and then carboxymethylated with sodium iodoacetate, gave two chains, a functionally active heavy chain with about 80% of the original activity and a light chain. These two chains were found to be linked by a single interchain disulfide bond. The functionally active heavy chain can be isolated by an affinity chromatography method with [N alpha-(epsilon-aminocaproyl)-DL-homoarginine hexylester]-Sepharose. The light chain, which has no enzyme activity, is not adsorbed to the affinity matrix, whereas the active heavy chain was adsorbed and subsequently eluted. The active heavy chain was further purified by gel filtration on Sephadex G-100. This preparation was found to be homogeneous by both analytical and sodium dodecyl sulfate-polyacrylamide disc gel electrophoresis. The molecular weight of the active heavy chain was determined to be 33,000 by Sephadex G-100 gel filtration and 31,000 by sodium dodecyl sulfate-polyacrylamide disc gel electrophoresis. Its specific activity, with L-pyroglutamyl-glycyl-L-arginine-p-nitroanilide, was determined to be 208,000 IU/mg of protein. Approximately 87% active sites were found by p-nitrophenyl-p'-guanidino-benzoate titration with a molar activity of 7.41 X 10(9) IU/mmol of active site. The active heavy chain when compared to low molecular weight urokinase has a similar molecular weight, specific activity, and amino acid composition. The NH2-terminal residue found in the active heavy chain was lysine which was the same as that found in low molecular weight urokinase, whereas the NH2-terminal residues found in high molecular weight urokinase were serine and lysine. Serine is the NH2-terminal residue of the light chain of high molecular weight urokinase. The steady state kinetic parameters of activation of human Glu-plasminogen by the active heavy chain were also similar to low molecular weight urokinase, as were the amidase parameters of these enzymes. The Michaelis constants of activation (Kplg) were 2.11 and 2.21 microM, respectively; the catalytic rate constants of activation (kplg) were 51.7 and 44.1 min-1, respectively, with second order rate constants, kplg/Kplg of 24.5 and 20.2 microM-1 min-1, respectively.     

Stability of thermostable alkaline protease from Bacillus licheniformis RP1 in commercial solid laundry detergent formulations

The stability of crude extracellular protease produced by Bacillus licheniformis RP1, isolated from polluted water, in various solid laundry detergents was investigated. The enzyme had an optimum pH and temperature at pH 10.0–11.0 and 65–70 °C. Enzyme activity was inhibited by PMSF, suggesting that the preparation contains a serine-protease. The alkaline protease showed extreme stability towards non-ionic (5% Tween 20% and 5% Triton X-100) and anionic (0.5% SDS) surfactants, which retained 100% and above 73%, respectively, of its initial activity after preincubation 60 min at 40 °C.

The RP1 protease showed excellent stability and compatibility with a wide range of commercial solid detergents at temperatures from 40 to 50 °C, suggesting its further application in detergent industry. The enzyme retained 95% of its initial activity with Ariel followed by Axion (94%) then Dixan (93.5%) after preincubation 60 min at 40 °C in the presence of 7 mg/ml of detergents. In the presence of Nadhif and New Det, the enzyme retained about 83.5% of the original activity. The effects of additives such as maltodextrin, sucrose and PEG 4000 on the stability of the enzyme during spray-drying and during subsequent storage in New Det detergent were also examined. All additives tested enhanced stability of the enzyme.     

Expression, purification, and characterization of Clostridium botulinum type B light chain

A full-length synthetic gene encoding the light chain of botulinum neurotoxin serotype B, approximately 50 kDa (BoNT/B LC), has been cloned into a bacterial expression vector pET24a+. BoNT/B LC was expressed in Escherichia coli BL21.DE3.pLysS and isolated from the soluble fraction. The resultant protein was purified to homogeneity by cation chromatography and was determined to be >98% pure as assessed by SDS-polyacrylamide gel stained with SilverXpress and analyzed by densitometry. Mass spectroscopic analysis indicated the protein to be 50.8 kDa, which equaled the theoretically expected mass. N-terminal sequencing of the purified protein showed the sequence corresponded to the known reported sequence. The recombinant BoNT/B light chain was found to be highly stable, catalytically active, and has been used to prepare antisera that neutralizes against BoNT/B challenge. Characterization of the protein including pH, temperature, and the stability of the protein in the presence or absence of zinc is described within. The influence of pH differences, buffer, and added zinc on secondary and tertiary structure of BoNT/B light chain was analyzed by circular dichroism and tryptophan fluorescence measurements. Optimal conditions for obtaining maximum metalloprotease activity and stabilizing the protein for long term storage were determined. We further analyzed the thermal denaturation of BoNT/B LC as a function of temperature to probe the pH and added zinc effects on light chain stability. The synthetic BoNT/B LC has been found to be highly active on its substrate (vesicle associated membrane protein-2) and, therefore, can serve as a useful reagent for BoNT/B research.     

Prevention of aggregation and autocatalysis for sustaining biological activity of recombinant BoNT/A-LC upon long-term storage

Protein aggregation during expression, purification, storage, or transfer into requisite assay buffers hampers the use of proteins for in vitro studies. The formation of these aggregates represents a major obstacle in the study of biological activity and also restricts the spectrum of protein products being available for the biomedical applications. The catalytic light chain of botulinum neurotoxin type A undergoes autocatalysis and aggregation after purification upon long-term storage and freeze-thawing. In present study the conditions for the high level expression and purification of biologically active light chain protein of botulinum neurotoxin were optimized from a synthetic gene. Several co-solvents were screened in order to prevent autocatalysis and aggregation of rBoNT/A-LC. The effect of the co-solvents is studied on endopeptidase activity during long term storage of the recombinant protein. The purified rBoNT/A-LC was also evaluated for its immunogenicity.     

ADAMTS-4 (aggrecanase-1): N-terminal activation mechanisms

ADAMTS-4 (aggrecanase 1) is synthesized as a latent precursor protein that may require activation through removal of its prodomain before it can exert catalytic activity. We examined various proteinases as well as auto-activation under a wide range of conditions for removal of the prodomain and induction of enzymatic activity. The proprotein convertases, furin, PACE4, and PC5/6 efficiently removed the prodomain through cleavage at Arg(212)/Phe(213), generating an active enzyme. Of a broad range of proteases evaluated, only MMP-9 and trypsin were capable of removing the prodomain. In the presence of mercuric compounds, removal of the prodomain through autocatalysis was not observed, nor was it observed at temperatures from 22 to 65 degrees C, at ionic strengths from 0.1 to 1M, or at acidic/neutral pH. At basic pH 8-10, removal of the prodomain by autocatalysis occurred, generating an active enzyme. In conclusion, the pro-form of ADAMTS-4 is not catalytically active and only a limited number of mechanisms mediate its N-terminal activation.     

Dephosphorylation of distinct sites in myosin light chain by two types of phosphatase in aortic smooth muscle

Two types of myosin light chain phosphatase from aortic smooth muscle extract were separated by chromatography on heparin-agarose. The phosphatase which appeared in the flow-through fractions had low activity on actomyosin, its apparent molecular mass was 260 kDa and upon ethanol treatment it generated a catalytic subunit with an apparent molecular mass of 36-39 kDa as determined by gel filtration. This phosphatase preferentially dephosphorylated the alpha-subunit of phosphorylase kinase and its phosphorylase phosphatase activity was not inhibited by heparin, inhibitor-1 or inhibitor-2. The phosphatase retained by heparin-agarose had high activity on actomyosin, its apparent molecular mass was 150 kDa and upon ethanol treatment it generated a catalytic subunit with an apparent molecular mass of 39-42 kDa. It preferentially dephosphorylated the beta-subunit of phosphorylase kinase and its phosphorylase phosphatase activity was not inhibited by heparin, inhibitor-1 or inhibitor-2. Myosin light chain was phosphorylated by myosin light chain kinase in peptides AB (Ser-P) and CD (Thr-P), and/or by protein kinase C in peptides E (Ser-P) and F (Thr-P) as determined by one-dimensional phosphopeptide mapping. The catalytic subunit of heparin-agarose flow-through phosphatase preferentially dephosphorylated peptide F over peptides AB, CD and E in both isolated light chain and actomyosin. The catalytic subunit of heparin-agarose bound phosphatase could effectively dephosphorylate all sites in isolated light chain, whereas it was less effective on dephosphorylation of peptide E in actomyosin.     

Immobilization of chitosan-invertase neoglycoconjugate on carboxymethylcellulose-modified chitin

Saccharomyces cerevisiae invertase, chemically modified with chitosan, was immobilized on a carboxymethylcellulose-coated chitin support via polyelectrolyte complex formation. The yield of immobilized protein was determined to be 72% and the enzyme retained 68% of the initial invertase activity. The optimum temperature for invertase was increased by 5 degrees C and its thermostability was enhanced by about 9 degrees C after immobilization. The immobilized enzyme was stable against incubation in high ionic strength solutions and was 12.6-fold more resistant to thermal treatment at 65 degrees C than the native counterpart. The prepared biocatalyst retained 98% and 100% of the original catalytic activity after 10 cycles of reuse and 70 h of continuous operational regime in a packed bed reactor, respectively. The immobilized enzyme retained 95% of its activity after 50 days of storage at 37 degrees C.     

Immobilization of Aspergillus oryzae tannase and properties of the immobilized enzyme

Tannase enzyme from Aspergillus oryzae was immobilized on various carriers by different methods. The immobilized enzyme on chitosan with a bifunctional agent (glutaraldehyde) had the highest activity. The catalytic properties and stability of the immobilized tannase were compared with the corresponding free enzyme. The bound enzyme retained 20·3% of the original specific activity exhibited by the free enzyme. The optimum pH of the immobilized enzyme was shifted to a more acidic range compared with the free enzyme. The optimum temperature of the reaction was determined to be 40 °C for the free enzyme and 55 °C for the immobilized form. The stability at low pH, as well as thermal stability, were significantly improved by the immobilization process. The immobilized enzyme exhibited mass transfer limitation as reflected by a higher apparent K_m value and a lower energy of activation. The immobilized enzyme retained about 85% of the initial catalytic activity, even after being used 17 times.     

A fragment comprising the last third of bovine serum albumin which accounts for almost all the antigenic reactivity of the native protein.

The fragmentation of native bovine serum albumin by trypsin has been studied in aqueous solution under various conditions with regard to the yield and size of the fragments obtained. From a partial tryptic hydrolysate at pH 8.2 (40 degrees, 1 hour), a homogeneous fragment was isolated in high yield by gel filtration on Sephadex G-100, followed by chromatography on DEAE-cellulose. The molecular weight of the fragment by gel filtration on calibrated Sephadex G-100 columns and by sodium dodecyl sulfate electrophoresis was 22,500. After reduction of the disulfide bonds followed by alkylation of the resultant thiol groups with iodoacetamide, the fragment retained homogeneity by disc electrophoresis and its molecular weight remained unchanged, indicating that it was composed of a single polypeptide chain. From its amino acid composition, sequence of the first 20 residues, and actions of carboxypeptidases A or B, it was unequivocally assigned to positions 377-571 in albumin. The inhibitory activity of the fragment was 90 to 93% towards the immune reaction of the protein with the IgG fraction of the antisera. The IgGfraction accounted for 96% of the total antibody activity in the antisera. An immunoabsorbent of fragment 377-571 removed 89 to 95% of the antibody to albumin. A fluorescent derivative of the fragment, which retained full immunochemical activity, was found to bind 2 mol of antibody/mol of peptide. The disulfides in peptide 377-571 were essential for its immunochemical reaction because the latter was entirely abolished upon reduction and S-alkylation of the disulfides. Since this fragment comprised only a third of the albumin molecule, but accounted for 90 to 95% of its antigenic reactivity, the results indicated that native albumin carries identical repeating antigenic reactive sites.     

Optimization of conditions for protease production by Chryseobacterium taeanense TKU001

A protease-producing bacterium was isolated and identified as Chryseobacterium taeanense TKU001. An extracellular metalloprotease with novel properties of solvent- and surfactant-stable was purified from the culture supernatant of C. taeanense TKU001 with shrimp shell wastes as the sole carbon/nitrogen source. The optimized condition for protease production was found when the culture was shaken at 37 degrees C for 3 days in 50 mL of medium containing 0.5% shrimp shell powder (SSP) (w/v), 0.1% K2HPO4, and 0.05% MgSO4.7H2O. Two extracellular proteases (FI and FII) were purified and characterized, and their molecular weights, pH and thermal stabilities were determined. The molecular masses of TKU001 protease FI and FII determined by SDS-PAGE and gel filtration were approximately 41 kDa and 75 kDa, respectively. The optimum pH, optimum temperature, pH stability, and thermal stability of TKU001 protease FI were 8, 60 degrees C, pH 6-9, and 60 degrees C, respectively. The optimum pH, optimum temperature, pH stability, and thermal stability of TKU001 protease FII were 7, 60 degrees C, pH 7-9, and 50 degrees C, respectively. TKU001 protease FI and FII were both inhibited completely by EDTA, indicating that the TKU001 protease FI and FII were metalloproteases. TKU001 protease FI and FII retained more than 75% of its original protease activity after preincubation for 10 days at 4 degrees C in the presence of 25% most tested organic solvents. Additionally, the TKU001 protease FI retained 79%, 80%, and 110% of its original activity in the presence of 2% Tween 20, 2% Tween 40, and 2% Triton X-100, respectively. However, at the same condition, the activity of TKU001 protease FII retained 100%, 100%, and 121% of its original activity, respectively. This is the first report of C. taeanense being able to use shrimp shell wastes as the sole carbon/nitrogen source for proteases production. The novelties of the TKU001 protease include its high stability to the solvents and surfactants. These unique properties make it an ideal choice for application in detergent formulations and enzymatic peptide synthesis.     

Thermostable alkaline lipase from a newly isolated thermophilic Bacillus,strain A30-1 (ATCC 53841)

A thermophilic bacterium was isolated from a hot spring area of Yellowstone National Park. The organism grew optimally at 60–65°C and in the pH range of 6–9. It was characterized as Bacillus sp. In the presence of corn or olive oil (1.0%) as the growth substrate, this Bacillus produced an extracellular lipolytic activity (EC 3.1.1.3). The enzyme activity could be efficiently recovered by ultrafiltration of cell-free culture supernatant. The partially purified lipase preparation had an optimum temperature of 60°C, at an optimum pH of 9.5. It retained 100% of the original activity after being heated at 75°C for half an hour. The half life of the enzyme was 8 h at 75°C. The enzyme retained at least 90% of the original activity after it was incubated at 60°C for 15 h at pH's in the range of 5 to 10.5. The enzyme was active on triglycerides containing fatty acids having a carbon chain length of C16 : 0 to C22 : 0 as well as on natural fats and oils. The enzyme activity was stable to both hydrogen peroxide and alkaline protease which are detergent ingredients. The purified enzyme had an isoelectric point of 5.15 and an approximate molecular weight of 65,000.     

Three-dimensional structure of horse liver alcohol dehydrogenase at 2-4 A resolution.

The crystal structure analysis of horse liver alcohol dehydrogenase has been extended to 2.4 Å resolution. From the corresponding electron density map of the apoenzyme we have determined the positions of the 374 amino acids in the polypeptide chain of each subunit.The coenzyme binding domain of the subunit comprises residues 176 to 318. 45% of these residues are helical and 32% are in the central six-stranded pleated sheet structure. The positions and orientations of the helices with respect to the pleated sheet indicate a possible folding mechanism for this part of the subunit structure. The coenzyme analogue ADP-ribose binds to this domain in a position and orientation very similar to coenzyme binding to lactate dehydrogenase. The adenine part binds in a hydrophobic pocket, the adenosine ribose is hydrogen-bonded to the side chain of Asp223, the pyrophosphate is positioned by interaction with Arg47 and the nicotinamide ribose is 6Å away from the catalytic zinc atom.The catalytic domain is mainly built up from three distinct antiparallel pleated-sheet regions. Residues within this domain provide ligands to the catalytic zinc atom; Cys46, His67 and Cys174. An approximate tetrahedral coordination of this zinc is completed by a water molecule or hydroxyl ion depending on the pH. Residues 95 to 113 form a lobe that binds the second zinc atom of the subunit. This zinc is liganded in a distorted tetrahedral arrangement by four sulphur atoms from the cysteine residues 97, 100, 103 and 111. The lobe forms one side of a significant cleft in the enzyme surface suggesting that this region might constitute a second catalytic centre of unknown function.The two domains of the subunit are separated by a crevice that contains a wide and deep hydrophobic pocket. The catalytic zinc atom is at the bottom of this pocket, with the zinc-bound water molecule projecting out into the pocket. This water molecule is hydrogen-bonded to the side chain of Ser48 which in turn is hydrogen-bonded to His51. The pocket which in all probability is the binding site for the substrate and the nicotinamide moiety of the coenzyme, is lined almost exclusively with hydrophobic side chains. Both subunits contribute residues to each of the two substrate binding pockets of the molecule. The only accessible polar groups in the vicinity of the catalytic centre are Ser48 and Thr178 apart from zinc and the zinc-bound water molecule.     

Subunit interaction enhances enzyme activity and stability of sweet potato cytosolic Cu/Zn-superoxide dismutase purified by a His-tagged recombinant protein method

The coding region of copper/zinc-superoxide dismutase (Cu/Zn-SOD) cDNA from sweet potato, Ipomoea batatas (L.) Lam. cv. Tainong 57, was introduced into an expression vector, pET-20b(+). The Cu/Zn-SOD purified by His-tagged technique showed two active forms (dimer and monomer). The amount of proteins of dimer and monomer appeared to be equal, but the activity of dimeric form was seven times higher than that of monomeric form. The enzyme was dissociated into monomer by imidazole buffer above 1.0 M, acidic pH (below 3.0), or SDS (above 1%). The enzyme is quite stable. The enzyme activity is not affected at 85 °C for 20 min, in alkali pH 11.2, or in 0.1 M EDTA and also quite resistant to proteolytic attack. Dimer is more stable than monomer. The thermal inactivation rate constant k _dcalculated for the monomer at 85 °C was 0.029 min^-1 and the half-life for inactivation was about 28 min. In contrast, there is no significant change of dimer activity after 40 min at 85 °C. The enzyme dimer and monomer retained 83% and 58% of original activity, respectively, after 3 h incubation with trypsin at 37 °C, while those retained 100% and 31% of original activity with chymotrypsin under the same condition. These results suggest subunit interaction might change the enzyme conformation and greatly improve the catalytic activity and stability of the enzyme. It is also possible that the intersubunit contacts stabilize a particular optimal conformation of the protein or the dimeric structure enhances catalytic activity by increasing the electrostatic steering of substrate into the active site.     

Mechanism of ferritin iron uptake: activity of the H-chain and deletion mapping of the ferro-oxidase site. A study of iron uptake and ferro-oxidase activity of human liver, recombinant H-chain ferritins, and of two H-chain deletion mutants

To study the functional differences between human ferritin H- and L-chains and the role of the protein shell in the formation and growth of the ferritin iron core, we have compared the kinetics of iron oxidation and uptake of ferritin purified from human liver (90% L) and of the H-chain homopolymer overproduced in Escherichia coli (100% H). As a control for iron autocatalytic activity, we analyzed the effect of Fe(III) on the iron uptake reaction. The results show that the H-chain homopolymer has faster rates of iron uptake and iron oxidation than liver ferritin in all the conditions analyzed and that the difference is reduced in the conditions in which iron autocatalysis in high: i.e. at pH 7 and in presence of iron core. We have also analyzed the properties of two engineered H-chains, one lacking the last 22 amino acids at the carboxyl terminus and the other missing the first 13 residues at the amino terminus. These mutant proteins assemble in ferritin-like proteins and maintain the ability to catalyze iron oxidation. The deletion at the carboxyl terminus, however, prevents the formation of a stable iron core. It is concluded that the ferritin H-chain has an iron oxidation site which is separated from the sites of iron transfer and hydrolysis and that either the integrity of the molecule or the presence of the amino acid sequences forming the hydrophobic channel is necessary for iron core formation.     

Crosslinking by thiol disulfide interchange of 5,5'-dithiobis(2-nitrobenzoic acid)-treated light chain and heavy chain of rabbit skeletal myosin

Interchain disulfide crosslinks between the heavy-chain fragment in heavy meromyosin and myosin light chain 2, generated by 5,5'-dithiobis(2-nitrobenzoic acid (Nbs2), are formed under appropriate ionic conditions at neutral pH as revealed by liberation of the chromogenic 2-nitro-5-thiobenzoic acid. The presence of the original or of a slightly digested light chain 2 reduces the rate of the reaction of heavy meromyosin with Nbs2-modified light chain 2 by 32 - 39%, if Ca2+ is present. Dodecyl sulfate/polyacrylamide gel electrophoresis in absence of reducing agents shows that Nbs2-modified light chain 2 attaches to the heavy chain in the region of the 21-kDa fragment of heavy meromyosin, which contains the essential thiol groups and which has been located at the subfragment 1/subfragment 2 junction of myosin [Balint, M., Wolf, I., Tarcsafalvi, A., Gergely, J. and Sreter, F. A. (1978) Arch. Biochem. Biophys. 190, 793-799]. Modification of thiol-1 groups with iodoacetamide as well as crosslinking the thiol-1 and thiol-2 groups by the bifunctional reagent p-N,N'-phenylenedimaleimide prior to incubation with Nbs2-modified light chain 2 has no substantial effect on the crosslinking reaction. This indicates that other thiol groups are involved in the binding of Nbs2-modified light chain 2 to the heavy chain. An examination of K+, Ca2+, Mg2+ and actin-activated Mg2+ ATPase activities of heavy meromyosin that had been crosslinked with Nbs2-modified light chain 2 shows only a slight change in comparison with intact heavy meromyosin, indicating that crosslinking had not altered significantly the hydrolytic site. Crosslinking of Nbs2-modified light chain 2 to light-chain-2-deficient heavy meromyosin restored the original light-chain-2-dependent Ca2+ sensitivity of the tryptic fragmentation of heavy meromyosin, suggesting that crosslinking takes place at the proper binding site for light 2.