Perspectives on transdermal ultrasound mediated drug delivery

The use of needles for multiple injection of drugs, such as insulin for diabetes, can be painful. As a result, prescribed drug noncompliance can result in severe medical complications. Several noninvasive methods exist for transdermal drug delivery. These include chemical mediation using liposomes and chemical enhancers or physical mechanisms such as microneedles, iontophoresis, electroporation, and ultrasound. Ultrasound enhanced transdermal drug delivery offers advantages over traditional drug delivery methods which are often invasive and painful. A broad review of the transdermal ultrasound drug delivery literature has shown that this technology offers promising potential for noninvasive drug administration. From a clinical perspective, few drugs, proteins or peptides have been successfully administered transdermally because of the low skin permeability to these relatively large molecules, although much work is underway to resolve this problem. The proposed mechanism of ultrasound has been suggested to be the result of cavitation, which is discussed along with the bioeffects from therapeutic ultrasound. For low frequencies, potential transducers which can be used for drug delivery are discussed, along with cautions regarding ultrasound safety versus efficacy.     

Drug delivery systems: polymers and drugs monitored by capillary electromigration methods

In this paper, different electromigration methods used to monitor drugs and polymers released from drug delivery systems are reviewed. First, an introduction to the most typical arrangements used as drug delivery systems (e.g., polymer-drug covalent conjugates, membrane or matrix-based devices) is presented. Next, the principles of different capillary electromigration procedures are discussed, followed by a revision on the different procedures employed to monitor the release of drugs and the degradation or solubilization of the polymeric matrices from drug delivery systems during both in vitro and in vivo assays. A critical comparison between these capillary electrophoretic methods and the more common chromatographic methods employed to analyze drugs and polymers from drug delivery systems is presented. Finally, future outlooks of these electromigration procedures in the controlled release field are discussed.     

高通量药物筛选技术的研究现状及光学编码技术在其中的应用

高通量药物筛选是创新药物研究的重要内容,本文综合介绍了高通量药物筛选的研究现状及发展趋势,及目前遇到的一些问题,如随着样品的体积达到微升量级时,目前所采用的孔板筛选遇到了一些难以克服的障碍,使化合物和药物靶点的相互作用难以进行等。针对这些问题,本文介绍了一种新的以自编码光谱识别微球为基础的新型高通量药物筛选技术在高通量药物筛选中的应用,同时简要介绍了我们目前所做的一些工作。     

Enzyme-triggered nanomedicine: drug release strategies in cancer therapy

Nanomedicine as a field has emerged from the early success of nanoparticle-based drug delivery systems, in particular for treatment of cancer, and the advances made in nano- and biotechnology over the past decade. A prerequisite for nanoparticle-based drug delivery systems to be effective is that the drug payload is released at the target site. A large number of drug release strategies have been proposed that can be classified into certain areas. The simplest and most successful strategy so far, probably due to relative simplicity, is based on utilizing certain physico-chemical characteristics of drugs to obtain a slow drug leakage from the formulations after accumulation in the cancerous site. However, this strategy is only applicable to a relatively small range of drugs and cannot be applied to biologicals. Many advanced drug release strategies have therefore been investigated. Such strategies include utilization of heat, light and ultrasound sensitive systems and in particular pH sensitive systems where the lower pH in endosomes induces drug release. Highly interesting are enzyme sensitive systems where over-expressed disease-associated enzymes are utilized to trigger drug release. The enzyme-based strategies are particularly interesting as they require no prior knowledge of the tumour localization. The basis of this review is an evaluation of the current status of drug delivery strategies focused on triggered drug release by disease-associated enzymes. We limit ourselves to reviewing the liposome field, but the concepts and conclusions are equally important for polymer-based systems.     

Low-frequency sonophoresis: a noninvasive method of drug delivery and diagnostics

Transdermal drug delivery offers an attractive alternative to injections and oral medications. However, applications of transdermal drug delivery are limited to only a few drugs as a result of low skin permeability. Application of low-frequency ultrasound enhances skin permeability, a phenomenon referred to as low-frequency sonophoresis. In this method, a short application of ultrasound is used to permeabilize skin for a prolonged period of time. During this period, ultrasonically permeabilized skin may be utilized for drug delivery. In addition, a sample of interstitial fluid or its components may be extracted through permeabilized skin for diagnostic applications. In this paper, we report our in vivo studies that demonstrate the principles of both of these concepts. Detailed studies on drug delivery are performed using inulin and mannitol as model drugs. Studies on diagnostics are performed using glucose as a model analyte. Applications of this technology to drug delivery and diagnostics are discussed.     

A Review of Multi-Responsive Membranous Systems for Rate-Modulated Drug Delivery

Membrane technology is broadly applied in the medical field. The ability of membranous systems to effectively control the movement of chemical entities is pivotal to their significant potential for use in both drug delivery and surgical/medical applications. An alteration in the physical properties of a polymer in response to a change in environmental conditions is a behavior that can be utilized to prepare ‘smart’ drug delivery systems. Stimuli-responsive or ‘smart’ polymers are polymers that upon exposure to small changes in the environment undergo rapid changes in their microstructure. A stimulus, such as a change in pH or temperature, thus serves as a trigger for the release of drug from membranous drug delivery systems that are formulated from stimuli-responsive polymers. This article has sought to review the use of stimuli-responsive polymers that have found application in membranous drug delivery systems. Polymers responsive to pH and temperature have been extensively addressed in this review since they are considered the most important stimuli that may be exploited for use in drug delivery, and biomedical applications such as in tissue engineering. In addition, dual-responsive and glucose-responsive membranes have been also addressed as membranes responsive to diverse stimuli.     

Enzyme-triggered nanomedicine: Drug release strategies in cancer therapy (Invited Review)

Abstract

Nanomedicine as a field has emerged from the early success of nanoparticle-based drug delivery systems, in particular for treatment of cancer, and the advances made in nano- and biotechnology over the past decade. A prerequisite for nanoparticle-based drug delivery systems to be effective is that the drug payload is released at the target site. A large number of drug release strategies have been proposed that can be classified into certain areas. The simplest and most successful strategy so far, probably due to relative simplicity, is based on utilizing certain physico-chemical characteristics of drugs to obtain a slow drug leakage from the formulations after accumulation in the cancerous site. However, this strategy is only applicable to a relatively small range of drugs and cannot be applied to biologicals. Many advanced drug release strategies have therefore been investigated. Such strategies include utilization of heat, light and ultrasound sensitive systems and in particular pH sensitive systems where the lower pH in endosomes induces drug release. Highly interesting are enzyme sensitive systems where over-expressed disease-associated enzymes are utilized to trigger drug release. The enzyme-based strategies are particularly interesting as they require no prior knowledge of the tumour localization. The basis of this review is an evaluation of the current status of drug delivery strategies focused on triggered drug release by disease-associated enzymes. We limit ourselves to reviewing the liposome field, but the concepts and conclusions are equally important for polymer-based systems.     

多糖-药物轭合物的研究与展望

多糖类物质作为赋形剂在药物制剂中已被广泛使用,多糖结构中包含了多种活性基团如羟基、羧基、氨基等,具有良好的亲水性、生物可降解性以及生物安全性,使其在聚合物-药物轭合物的构建中成为理想的载体材料.目前天然的多糖大分子及其衍生物作为药物载体的研究方兴未艾,以多糖为载体的聚合物-药物轭合物在定位或靶向给药、组织工程、生物黏附等领域也备受关注.本文以天然多糖-药物轭合物的研究现状为切入点,总结归纳了多糖-药物轭合物的设计与构建途径,介绍了其在药物传递中的应用,讨论并分析了多糖在轭合物体系中的角色和发挥的作用,对以多糖为载体的聚合物-药物轭合物发展的方向予以了讨论.     

Secondary mAb--vcMMAE conjugates are highly sensitive reporters of antibody internalization via the lysosome pathway

Monoclonal antibodies (mAb) selectively recognizing tumor surface antigens are an important and evolving approach to targeted cancer therapy. One application of therapeutic mAbs is drug targeting via mAb-drug conjugate (ADC) technology. Identification of mAbs capable of internalizing following antigen binding has been accomplished by tracking decline of surface-bound mAb or by internalization of a secondary mAb linked to a toxin. These methods may not be sufficiently sensitive for screening nor wholly predictive of the mAbs' capacity for a specific drug delivery. We have developed a highly selective and sensitive method to detect mAbs for cell internalization and drug delivery. This system uses secondary anti-human or anti-murine mAbs conjugated to the high-potency drug monomethyl auristatin E (MMAE) via a highly stable, enzymatically cleavable linker. Prior studies of this drug linker technology demonstrated internalization of a primary ADC leads to trafficking to lysosomes, drug release by lysosomal cathepsin B, and ensuing cell death. A secondary antibody--drug conjugate (2 degrees ADC) capable of binding primary mAbs bound to the surface of antigen-positive cells has comparable drug delivery capability. The system is sufficiently sensitive to detect internalizing mAbs in nonclonal hybridoma supernatants and is predictive of the activity of subsequently produced primary ADC. Because of their high extracellular stability, the noninternalized 2 degrees ADC are 100--1000-fold less toxic to cells over extended periods of time, permitting an assay in which components can be added without need for separate wash steps. This homogeneous screening system is amenable to medium-throughput screening applications and enables the early identification of mAbs capable of intracellular trafficking for drug delivery and release.     

Bioluminescence imaging of hollow fibers in living animals: its application in monitoring molecular pathways

We have applied noninvasive optical imaging technology to the in vivo hollow fiber assay, using tumor cell lines in which optical reporters are expressed in response to activation/inhibition of a specific molecular pathway. In vivo noninvasive imaging of molecular pathways in cells within hollow fibers enables a rapid and accurate evaluation of drug targets and provides useful insights to guide novel drug discovery. In this protocol we show, as an example, that a luciferase reporter, driven by the responsive element of nuclear factor NF-kappaB, was induced in cells within hollow fibers implanted in living mice, and a detailed procedure for in vivo bioluminescence imaging of hollow fibers is described. This approach can, in principle, be applied to image any molecular pathways of interest when appropriate reporter cells are generated. Hollow fiber encapsulation and implantation takes 2 d, and in vivo validation of reporter takes 1-2 weeks.     

Microbioreactor arrays with parametric control for high-throughput experimentation

A scalable array technology for parametric control of high-throughput cell cultivations is demonstrated. The technology makes use of commercial printed circuit board (PCB) technology, integrated circuit sensors, and an electrochemical gas generation system. We present results for an array of eight 250 microl microbioreactors. Each bioreactor contains an independently addressable suite that provides closed-loop temperature control, generates feed gas electrochemically, and continuously monitors optical density. The PCB technology allows for the assembly of additional off-the-shelf components into the microbioreactor array; we demonstrate the use of a commercial ISFET chip to continuously monitor culture pH. The electrochemical dosing system provides a powerful paradigm for reproducible gas delivery to high-density arrays of microreactors. Growth data are presented for Escherichia coli cultured in the array with varying microaerobic conditions using electrochemically generated oxygen. Additionally, we present data on carbon dioxide generation for pH dosing.     

蛋白质和多肽药物长效性研究进展

基于分子生物学和重组技术的发展,蛋白质和多肽已经成为一类重要的药物,但是其稳定性差,生物利用率低,半衰期短等问题也日益受到关注。本文重点介绍了一些新的给药途径和给药系统,例如鼻腔、颊等给药途径以及黏膜给药系统、透皮给药系统、缓控释技术等给药系统的进展。综述了对于蛋白质和多肽药物进行定点突变和化学修饰,以达到增加其长效性的一些新方法。     

Synergistic Transdermal Delivery of Biomacromolecules Using Sonophoresis after Microneedle Treatment

Transdermal drug delivery systems have been studied as an attractive alternative to conventional delivery routes. However, the outermost layer of the skin, the stratum corneum, acts as a primary barrier to drug delivery. A synergistic combination of microneedles (MNs) and low-frequency ultrasound (U) was used to enhance the penetration of siRNA and ovalbumin. The specific gene knockdown caused by siRNAs through the RNA interference pathway is more stable when delivered via the transdermal route. Ovalbumin, a representative adjuvant, causes a more efficient immune response in the skin because of the numerous immune cells in the skin. The synergistic transdermal delivery resulted in approximately 7 times and 15 times greater penetration of siRNA and ovalbumin respectively than in their respective negative controls, and histological analysis showed minimal invasion. Thus, as the synergistic transdermal delivery enhanced the penetration of biomacromolecules into the skin, this technique is expected to yield a promising technology for a transdermal drug delivery system.     

Assessment of liposome delivery using scintigraphic imaging

Scintigraphic imaging is a valuable tool for the development of liposome-based therapeutic agents. It provides the ability to non-invasively track and quantitate the distribution of liposomes in the body. Liposomes labeled with technetium-99 m (99mTc) are particularly advantageous for imaging studies because of their favorable physical characteristics. Examples of how scintigraphic imaging studies have contributed to the evaluation and development of a variety of liposome formulations will be presented. These include liposomes for targeting processes with inflammation associated increased vascular permeability such as healing bone fractures and viral infections; liposomes for intraarticular delivery; and liposomes for delivery of agents to lymph nodes located in the extremities, the mediastinum and the peritoneum. Scintigraphic studies of liposome distribution are very informational and often suggest new drug delivery applications for liposomes.     

Pros and Cons of the Liposome Platform in Cancer Drug Targeting

Coating of liposomes with polyethylene-glycol (PEG) by incorporation in the liposome bilayer of PEG-derivatized lipids results in inhibition of liposome uptake by the reticulo-endothelial system and significant prolongation of liposome residence time in the blood stream. Parallel developments in drug loading technology have improved the efficiency and stability of drug entrapment in liposomes, particularly with regard to cationic amphiphiles such as anthracyclines. An example of this new generation of liposomes is a formulation of pegylated liposomal doxorubicin known as Doxil® or Caelyx®, whose clinical pharmacokinetic profile is characterized by slow plasma clearance and small volume of distribution. A hallmark of these long-circulating liposomal drug carriers is their enhanced accumulation in tumors. The mechanism underlying this passive targeting effect is the phenomenon known as enhanced permeability and retention (EPR) which has been described in a broad variety of experimental tumor types. Further to the passive targeting effect, the liposome drug delivery platform offers the possibility of grafting tumor-specific ligands on the liposome membrane for active targeting to tumor cells, and potentially intracellular drug delivery. The pros and cons of the liposome platform in cancer targeting are discussed vis-à-vis nontargeted drugs, using as an example a liposome drug delivery system targeted to the folate receptor.     

Pros and cons of the liposome platform in cancer drug targeting

Coating of liposomes with polyethylene-glycol (PEG) by incorporation in the liposome bilayer of PEG-derivatized lipids results in inhibition of liposome uptake by the reticulo-endothelial system and significant prolongation of liposome residence time in the blood stream. Parallel developments in drug loading technology have improved the efficiency and stability of drug entrapment in liposomes, particularly with regard to cationic amphiphiles such as anthracyclines. An example of this new generation of liposomes is a formulation of pegylated liposomal doxorubicin known as Doxil or Caelyx, whose clinical pharmacokinetic profile is characterized by slow plasma clearance and small volume of distribution. A hallmark of these long-circulating liposomal drug carriers is their enhanced accumulation in tumors. The mechanism underlying this passive targeting effect is the phenomenon known as enhanced permeability and retention (EPR) which has been described in a broad variety of experimental tumor types. Further to the passive targeting effect, the liposome drug delivery platform offers the possibility of grafting tumor-specific ligands on the liposome membrane for active targeting to tumor cells, and potentially intracellular drug delivery. The pros and cons of the liposome platform in cancer targeting are discussed vis-à-vis nontargeted drugs, using as an example a liposome drug delivery system targeted to the folate receptor.     

A model predicting delivery of saquinavir in nanoparticles to human monocyte/macrophage (Mo/Mac) cells

Modeling the influence of a technology such as nanoparticle systems on drug delivery is beneficial in rational formulation design. While there are many studies showing drug delivery enhancement by nanoparticles, the literature provides little guidance regarding when nanoparticles are useful for delivery of a given drug. A model was developed predicting intracellular drug concentration in cultured cells dosed with nanoparticles. The model considered drug release from nanoparticles as well as drug and nanoparticle uptake by the cells as the key system processes. Mathematical expressions for these key processes were determined using experiments in which each process occurred in isolation. In these experiments, intracellular delivery of saquinavir, a low solubility drug dosed as a formulation of poly(ethylene oxide)-modified poly(epsilon- caprolactone) (PEO-PCL) nanoparticles, was studied in THP-1 human monocyte/macrophage (Mo/Mac) cells. The model accurately predicted the enhancement in intracellular concentration when drug was administered in nanoparticles compared to aqueous solution. This simple model highlights the importance of relative kinetics of nanoparticle uptake and drug release in determining overall enhancement of intracellular drug concentration when dosing with nanoparticles.     

Advanced biomaterials and their potential applications in the treatment of periodontal disease

Periodontal disease is considered as a widespread infectious disease and the most common cause of tooth loss in adults. Attempts for developing periodontal disease treatment strategies, including drug delivery and regeneration approaches, provide a useful experimental model for the evaluation of future periodontal therapies. Recently, emerging advanced biomaterials including hydrogels, films, micro/nanofibers and particles, hold great potential to be utilized as cell/drug carriers for local drug delivery and biomimetic scaffolds for future regeneration therapies. In this review, first, we describe the pathogenesis of periodontal disease, including plaque formation, immune response and inflammatory reactions caused by bacteria. Second, periodontal therapy and an overview of current biomaterials in periodontal regenerative medicine have been discussed. Third, the roles of state-of-the-art biomaterials, including hydrogels, films, micro/nanofibers and micro/nanoparticles, developed for periodontal disease treatment and periodontal tissue regeneration, and their fabrication methods, have been presented. Finally, biological properties, including biocompatibility, biodegradability and immunogenicity of the biomaterials, together with their current applications strategies are given. Conclusive remarks and future perspectives for such advanced biomaterials are discussed.     

The role of multiscale computational approaches for rational design of conventional and nanoparticle oral drug delivery systems

Multiscale computational modeling of drug delivery systems (DDS) is poised to provide predictive capabilities for the rational design of targeted drug delivery systems, including multi-functional nanoparticles. Realistic, mechanistic models can provide a framework for understanding the fundamental physico-chemical interactions between drug, delivery system, and patient. Multiscale computational modeling, however, is in its infancy even for conventional drug delivery. The wide range of emerging nanotechnology systems for targeted delivery further increases the need for reliable in silico predictions. This review will present existing computational approaches at different scales in the design of traditional oral drug delivery systems. Subsequently, a multiscale framework for integrating continuum, stochastic, and computational chemistry models will be proposed and a case study will be presented for conventional DDS. The extension of this framework to emerging nanotechnology delivery systems will be discussed along with future directions. While oral delivery is the focus of the review, the outlined computational approaches can be applied to other drug delivery systems as well.     

Zwitterionic polymers in drug delivery: A review

Developments of novel drug delivery vehicles are sought-after to augment the therapeutic effectiveness of standard drugs. An urgency to design novel drug delivery vehicles that are sustainable, biocompatible, have minimized cytotoxicity, no immunogenicity, high stability, long circulation time, and are capable of averting recognition by the immune system is perceived. In this pursuit for an ideal candidate for drug delivery vehicles, zwitterionic materials have come up as fulfilling almost all these expectations. This comprehensive review is presenting the progress made by zwitterionic polymeric architectures as prospective sustainable drug delivery vehicles. Zwitterionic polymers with varied architecture such as appending protein conjugates, nanoparticles, surface coatings, liposomes, hydrogels, etc, used to fabricate drug delivery vehicles are reviewed here. A brief introduction of zwitterionic polymers and their application as reliable drug delivery vehicles, such as zwitterionic polymer–protein conjugates, zwitterionic polymer-based drug nanocarriers, and stimulus-responsive zwitterionic polymers are discussed in this discourse. The prospects shown by zwitterionic architecture suggest the tremendous potential for them in this domain. This critical review will encourage the researchers working in this area and boost the development and commercialization of such devices to benefit the healthcare fraternity.