Stability, unfolding, and structural changes of cofactor-free 1H-3-hydroxy-4-oxoquinaldine 2,4-dioxygenase

Stability, unfolding mechanism, spectroscopic, densimetric, and structural characteristics of the oxidatively stable C69S variant (HodC) of 1H-3-hydroxy-4-oxoquinaldine 2,4-dioxygenase (Hod) have been determined by classical and pressure modulation scanning calorimetry (DSC and PMDSC, respectively), circular dichroism (CD) spectroscopy, differential scanning densimetry (DSD), and dynamic light scattering measurements. At 25 degrees C, hexahistidine-tagged HodC has a hydrodynamic radius of 2.3 nm and is characterized by an unusually high degree of alpha-helical structure of approximately 60%, based on deconvolution of CD spectra. The percentage of beta-sheets and -turns is expected to be relatively low in view of its sequence similarity to proteins of the alpha/beta-hydrolase fold superfamily. His6HodC exhibits three-state unfolding (N <--> I <--> D) with an intermediate state I that exhibits at the transition temperature a volume larger than that of the native or denatured state. The intermediate state I is also associated with the highest isothermal expansion coefficient, alphaP, of the three states and exhibits a significantly lower percentage of alpha-helical structure than the native state. The stability difference between the native and intermediate state is rather small which makes I a potential candidate for reactions with various ligands, particularly those having a preference for the apparently preserved beta-type motifs.     

Dioxygenases Without Requirement for Cofactors: Identification of Amino Acid Residues Involved in Substrate Binding and Catalysis, and Testing for Rate-Limiting Steps in the Reaction of 1H-3-Hydroxy-4-oxoquinaldine 2,4-dioxygenase

1H-3-Hydroxy-4-oxoquinaldine 2,4-dioxygenase (Hod), catalyzing cleavage of its heteroaromatic substrate to form carbon monoxide and N-acetylanthranilate, belongs to the α/β hydrolase fold family of enzymes. Analysis of protein variants suggested that Hod has adapted active-site residues of the α/β hydrolase fold for the dioxygenolytic reaction. H251 was recently shown to act as a general base to abstract a proton from the organic substrate. Residue S101, which corresponds to the nucleophile of the catalytic triad of α/β-hydrolases, presumably participates in binding the heteroaromatic substrate. H102 and residues located in the topological region of the triad’s acidic residue appear to influence O₂ binding and reactivity. A tyrosine residue might be involved in the turnover of the ternary complex [HodH⁺–3,4-dioxyquinaldine dianion–O₂]. Absence of viscosity effects and kinetic solvent isotope effects suggests that turnover of the ternary complex, rather than substrate binding, product release, or proton movements, involves the rate-determining step in the reaction catalyzed by Hod.     

Cloning, sequence analysis, and expression of the Pseudomonas putida 33/1 1H-3-hydroxy-4-oxoquinoline 2,4-dioxygenase gene, encoding a carbon monoxide forming dioxygenase.

1H-3-hydroxy-4-oxoquinoline 2,4-dioxygenase (Qdo) from the 1H-4-oxoquinoline utilizing Pseudomonas putida strain 33/1, which catalyzes the cleavage of 1H-3-hydroxy-4-oxoquinoline to carbon monoxide and N-formylanthranilate, is devoid of any transition metal ion or other cofactor and thus represents a novel type of ring-cleavage dioxygenase. Gene qdo was cloned and sequenced. Its overexpression in Escherichia coli yielded recombinant His-tagged Qdo which was catalytically active. Qdo exhibited 36% and 16% amino acid identity to 1H-3-hydroxy-4-oxoquinaldine 2,4-dioxygenase (Hod) and atropinesterase (a serine hydrolase), respectively. Qdo as well as Hod possesses a SXSHG motif, resembling the motif GXSXG of the serine hydrolases which comprises the active-site nucleophile (X=arbitrary residue).     

Thermodynamic analysis of denaturant-induced unfolding of HodC69S protein supports a three-state mechanism

Thermodynamic stability parameters and the equilibrium unfolding mechanism of His 6HodC69S, a mutant of 1 H-3-hydroxy-4-oxoquinaldine 2,4-dioxygenase (Hod) having a Cys to Ser exchange at position 69 and an N-terminal hexahistidine tag (His 6HodC69S), have been derived from isothermal unfolding studies using guanidine hydrochloride (GdnHCl) or urea as denaturants. The conformational changes were monitored by following changes in circular dichroism (CD), fluorescence, and dynamic light scattering (DLS), and the resulting transition curves were analyzed on the basis of a sequential three-state model N = I = D. The structural changes have been correlated to catalytic activity, and the contribution to stability of the disulfide bond between residues C37 and C184 in the native protein has been established. A prominent result of the present study is the finding that, independent of the method used for denaturing the protein, the unfolding mechanism always comprises three states which can be characterized by, within error limits, identical sets of thermodynamic parameters. Apparent deviations from three-state unfolding can be rationalized by the inability of a spectroscopic probe to discriminate clearly between native, intermediate, and unfolded ensembles. This was the case for the CD-monitored urea unfolding curve.     

Bacterial 2,4-Dioxygenases: New Members of the α/β Hydrolase-Fold Superfamily of Enzymes Functionally Related to Serine Hydrolases

1H-3-hydroxy-4-oxoquinoline 2,4-dioxygenase (Qdo) from Pseudomonas putida 33/1 and 1H-3-hydroxy-4-oxoquinaldine 2,4-dioxygenase (Hod) from Arthrobacter ilicis Rü61a catalyze an N-heterocyclic-ring cleavage reaction, generating N-formylanthranilate and N-acetylanthranilate, respectively, and carbon monoxide. Amino acid sequence comparisons between Qdo, Hod, and a number of proteins belonging to the alpha/beta hydrolase-fold superfamily of enzymes and analysis of the similarity between the predicted secondary structures of the 2,4-dioxygenases and the known secondary structure of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 strongly suggested that Qdo and Hod are structurally related to the alpha/beta hydrolase-fold enzymes. The residues S95 and H244 of Qdo were found to be arranged like the catalytic nucleophilic residue and the catalytic histidine, respectively, of the alpha/beta hydrolase-fold enzymes. Investigation of the potential functional significance of these and other residues of Qdo through site-directed mutagenesis supported the hypothesis that Qdo is structurally as well as functionally related to serine hydrolases, with S95 being a possible catalytic nucleophile and H244 being a possible catalytic base. A hypothetical reaction mechanism for Qdo-catalyzed 2,4-dioxygenolysis, involving formation of an ester bond between the catalytic serine residue and the carbonyl carbon of the substrate and subsequent dioxygenolysis of the covalently bound anionic intermediate, is discussed.     

A substrate in pieces: allosteric activation of glycerol 3-phosphate dehydrogenase (NAD+) by phosphite dianion

The ratio of the second-order rate constants for reduction of dihydroxyacetone phosphate (DHAP) and of the neutral truncated substrate glycolaldehyde (GLY) by glycerol 3-phosphate dehydrogenase (NAD (+), GPDH) saturated with NADH is (1.0 x 10 (6) M (-1) s (-1))/(8.7 x 10 (-3) M (-1) s (-1)) = 1.1 x 10 (8), which was used to calculate an intrinsic phosphate binding energy of at least 11.0 kcal/mol. Phosphite dianion binds very weakly to GPDH ( K d > 0.1 M), but the bound dianion strongly activates GLY toward enzyme-catalyzed reduction by NADH. Thus, the large intrinsic phosphite binding energy is expressed only at the transition state for the GPDH-catalyzed reaction. The ratio of rate constants for the phosphite-activated and the unactivated GPDH-catalyzed reduction of GLY by NADH is (4300 M (-2) s (-1))/(8.7 x 10 (-3) M (-1) s (-1)) = 5 x 10 (5) M (-1), which was used to calculate an intrinsic phosphite binding energy of -7.7 kcal/mol for the association of phosphite dianion with the transition state complex for the GPDH-catalyzed reduction of GLY. Phosphite dianion has now been shown to activate bound substrates for enzyme-catalyzed proton transfer, decarboxylation, hydride transfer, and phosphoryl transfer reactions. Structural data provide strong evidence that enzymic activation by the binding of phosphite dianion occurs at a modular active site featuring (1) a binding pocket complementary to the reactive substrate fragment which contains all the active site residues needed to catalyze the reaction of the substrate piece or of the whole substrate and (2) a phosphate/phosphite dianion binding pocket that is completed by the movement of flexible protein loop(s) to surround the nonreacting oxydianion. We propose that loop motion and associated protein conformational changes that accompany the binding of phosphite dianion and/or phosphodianion substrates lead to encapsulation of the substrate and/or its pieces in the protein interior, and to placement of the active site residues in positions where they provide optimal stabilization of the transition state for the catalyzed reaction.     

The rate of entry of dioxygen and carbon monoxide into myoglobin.

The model for carbon monoxide or dioxygen recombination with heme proteins developed by the group at the University of Illinois is reexamined. We propose that the carbon monoxide or dioxygen molecule enters the protein at essentially a diffusion-limited rate determined by the solvent viscosity and that the protein offers no important barriers to this entry. The viscosity dependence of the entry rate k(ED), its magnitude (1 x 10(10) M(-1)s(-1), and the rate of quenching of triplet states of protoprophyrin IX in apomyoglobin by dioxygen are used as supporting evidence. Comparison is made to the model of a fluctuating protein developed by G. Weber.     

Two-electron reduction of quinones by Enterobacter cloacae NAD(P)H:nitroreductase: quantitative structure-activity relationships

Enterobacter cloacae NAD(P)H:nitroreductase (NR; EC 1.6.99.7) catalyzes two-electron reduction of a series of quinoidal compounds according to a "ping-pong" scheme, with marked substrate inhibition by quinones. The steady-state catalytic constants (k(cat)) range from 0.1 to 1600s(-1), and bimolecular rate constants (k(cat)/K(m)) range from 10(3) to 10(8)M(-1)s(-1). Quinones, nitroaromatic compounds and competitive to NADH inhibitor dicumarol, quench the flavin mononucleotide (FMN) fluorescence of nitroreductase. The reactivity of NR with single-electron acceptors is consistent with an "outer-sphere" electron transfer model, taking into account high potential of FMN semiquinone/FMNH(-) couple and good solvent accessibility of FMN. However, the single-electron acceptor 1,1(')-dibenzyl-4,4(')-bipyridinium was far less reactive than quinones possessing similar single-electron reduction potentials (E(1)(7)). For all quinoidal compounds except 2-hydroxy-1,4-naphthoquinones, there existed parabolic correlations between the log of rate constants of quinone reduction and their E(1)(7) or hydride-transfer potential (E(7)(Q/QH(-))). Based on pH dependence of rate constants, a single-step hydride transfer seems to be a more feasible quinone reduction mechanism. The reactivities of 2-hydroxy-1,4-naphthoquinones were much higher than expected from their reduction potential. Most probably, their enhanced reactivity was determined by their binding at or close to the binding site of NADH and dicumarol, whereas other quinones used the alternative, currently unidentified binding site.     

Stopped-flow and steady-state study of the diphenolase activity of mushroom tyrosinase

The reaction of mushroom (Agaricus bisporus) tyrosinase with dioxygen in the presence of several o-diphenolic substrates has been studied by steady-state and transient-phase kinetics in order to elucidate the rate-limiting step and to provide new insights into the mechanism of oxidation of these substrates. A kinetic analysis has allowed for the first time the determination of individual rate constants for several of the partial reactions that comprise the catalytic cycle. Mushroom tyrosinase rapidly reacts with dioxygen with a second-order rate constant k(+8) = 2.3 x 10(7) M(-)(1) s(-)(1), which is similar to that reported for hemocyanins [(1.3 x 10(6))-(5.7 x 10(7)) M(-)(1) s(-)(1)]. Deoxytyrosinase binds dioxygen reversibly at the binuclear Cu(I) site with a dissociation constant K(D)(O)()2 = 46.6 microM, which is similar to the value (K(D)(O)()2 = 90 microM) reported for the binding of dioxygen to Octopus vulgaris deoxyhemocyanin [Salvato et al. (1998) Biochemistry 37, 14065-14077]. Transient and steady-state kinetics showed that o-diphenols such as 4-tert-butylcatechol react significantly faster with mettyrosinase (k(+2) = 9.02 x 10(6) M(-)(1) s(-)(1)) than with oxytyrosinase (k(+6) = 5.4 x 10(5) M(-)(1) s(-)(1)). This difference is interpreted in terms of differential steric and polar effects that modulate the access of o-diphenols to the active site for these two forms of the enzyme. The values of k(cat) for several o-diphenols are also consistent with steric and polar factors controlling the mobility, orientation, and thence the reactivity of substrates at the active site of tyrosinase.     

A novel type of oxygenolytic ring cleavage: 2,4-oxygenation and decarbonylation of 1H-3-hydroxy-4-oxoquinaldine and 1H-3-hydroxy-4-oxoquinoline

Abstract The utilization of quinaldine (2-methylquinoline) by Arthrobacter sp. Rü61a proceeds via 1 H -4-oxoquinaldine, 1 H -3-hydroxy-4-oxoquinaldine, and N -acetyl-anthranilic acid. By analogy, 1 H -4-oxoquinoline is degraded by Pseudomonas putida 33/1 via 1 H -3-hydroxy-4-oxoquinoline and N -formylanthranilic acid. Using the purified enzymes from both organisms, the mode of N -heterocyclic ring cleavage was investigated. The conversions of 1 H -3-hydroxy-4-oxoquinaldine and 1 H -3-hydroxy-4-oxoquinoline to N -acetyl- and N -formylanthranilic acid, respectively, were both accompanied by the release of carbon monoxide. The enzyme-catalysed transformations were performed in an [¹⁸O]O₂ atmosphere and resulted in the incorporation of two oxygen atoms into the respective products, N -acetyl- and N -formylanthranilic acid, indicating an oxygenolytic attack at C-2 and C-4 of both 1 H -3-hydroxy-4-oxoquinaldine and 1 H -3-hydroxy-4-oxoquinolone.     

Cytochrome P450: substrate and prosthetic-group free radicals generated during the enzymatic cycle

During the enzymatic cycle of the cytochromes P450, dioxygen binds to the ferrous haemprotein when the resting ferric haemprotein has undergone a one-electron oxidation after substrate binding. A further one-electron reduction generates an intermediate that is isoelectronic with a peroxide dianion coordinated to a ferric iron. Heterolytic cleavage of the omicron--omicron bond generates water and a species which is formally an oxene (oxygen atom) coordinated by iron(III). However, on the basis of model reactions and by analogy to the catalases and peroxidases, this active oxidizing intermediate is formulated as an oxo-FeIV porphyrin pi-cation radical. The radical is stabilized by delocalization on the porphyrin macrocycle and the high oxidation state is achieved by oxidizing both the metal and the porphyrin ring of the haemprotein. Hydrogen atom abstraction from a saturated hydrocarbon substrate generates a substrate free radical, constrained by the protein binding site, and the equivalent of a hydroxyl radical bound to iron(III). Coupling of the 'hydroxy' and substrate radicals generates hydroxylated product and resting protein. For olefins an initial electron transfer to oxidized haemprotein gives a substrate cation radical. Further reaction of this radical can give the epoxide, the principal product; an aldehyde or ketone by rearrangement; or an alkylated haemprotein resulting in suicide inhibition.     

Crystallographic study on the dioxygen complex of wild-type and mutant cytochrome P450cam. Implications for the dioxygen activation mechanism

Two key amino acids, Thr252 and Asp251, are known to be important for dioxygen activation by cytochrome P450cam. We have solved crystal structures of a critical intermediate, the ferrous dioxygen complex (Fe(II)-O2), of the wild-type P450cam and its mutants, D251N and T252A. The wild-type dioxygen complex structure is very much the same as reported previously (Schlichting, I., Berendzen, J., Chu, K., Stock, A. M., Maves, S. A., Benson, D. E., Sweet, R. M., Ringe, D., Petsko, G. A., and Sligar, S. G. (2000) Science 287, 1615-1622) with the exception of higher occupancy and a more ordered structure of the iron-linked dioxygen and two "catalytic" water molecules that form part of a proton relay system to the iron-linked dioxygen. Due to of the altered conformation of the I helix groove these two waters are missing in the D251N dioxygen complex which explains its lower catalytic activity and slower proton transfer to the dioxygen ligand. Similarly, the T252A mutation was expected to disrupt the active site solvent structure leading to hydrogen peroxide formation rather than substrate hydroxylation. Unexpectedly, however, the two "catalytic" waters are retained in the T252A mutant. Based on these findings, we propose that the Thr(252) accepts a hydrogen bond from the hydroperoxy (Fe(III)-OOH) intermediate that promotes the second protonation on the distal oxygen atom, leading to O-O bond cleavage and compound I formation.     

Reaction of ferrous cytochrome c peroxidase with dioxygen: site-directed mutagenesis provides evidence for rapid reduction of dioxygen by intramolecular electron transfer from the compound I radical site.

The reaction of dioxygen with the ferrous forms of the cloned cytochrome c peroxidase [CCP(MI)] and mutants of CCP(MI) prepared by site-directed mutagenesis was studied by photolysis of the respective ferrous-CO complexes in the presence of dioxygen. Reaction of ferrous CCP(MI) with dioxygen transiently formed a FeII-O2 complex (bimolecular rate constant = (3.8 +/- 0.3) x 10(4) M-1 s-1 at pH 6.0; 23 degrees C) that reacted further (first-order rate constant = 4 +/- 1 s-1) to form a product with an absorption spectrum and an EPR radical signal at g = 2.00 that were identical to those of compound I formed by the reaction of CCP(MI)III with peroxide. Thus, the product of the reaction of CCP(MI)II with dioxygen retained three of the four oxidizing equivalents of dioxygen. Gel electrophoresis of the CCP(MI)II + dioxygen reaction products showed that covalent dimeric and trimeric forms of CCP(MI) were produced by the reaction of CCP(MI)II with dioxygen. Photolysis of the CCP(MI)II-CO complex in the presence of ferrous cytochrome c prevented the appearance of the cross-linked forms and resulted in the oxidation of 3 mol of cytochrome c/mol of CCP(MI)II-CO added. The results provide evidence that reaction of CCP(MI)II with dioxygen causes transient oxidation of the enzyme by 1 equiv above the normal compound I oxidation state. Mutations that eliminate the broad EPR signal at g = 2.00 characteristic of the compound I radical also prevented the rapid oxidation of the ferrous enzyme by dioxygen.(ABSTRACT TRUNCATED AT 250 WORDS)     

Substrate binding and catalytic mechanism in ascorbate peroxidase: evidence for two ascorbate binding sites

The catalytic mechanism of recombinant soybean cytosolic ascorbate peroxidase (rsAPX) and a derivative of rsAPX in which a cysteine residue (Cys32) located close to the substrate (L-ascorbic acid) binding site has been modified to preclude binding of ascorbate [Mandelman, D., Jamal, J., and Poulos, T. L. (1998) Biochemistry 37, 17610-17617] has been examined using pre-steady-state and steady-state kinetic techniques. Formation (k1 = 3.3 +/- 0.1 x 10(7) M(-1) s(-1)) of Compound I and reduction (k(2) = 5.2 +/- 0.3 x 10(6) M(-1) s(-1)) of Compound I by substrate are fast. Wavelength maxima for Compound I of rsAPX (lambda(max) (nm) = 409, 530, 569, 655) are consistent with a porphyrin pi-cation radical. Reduction of Compound II by L-ascorbate is rate-limiting: at low substrate concentration (0-500 microM), kinetic traces were monophasic but above approximately 500 microM were biphasic. Observed rate constants for the fast phase overlaid with observed rate constants extracted from the (monophasic) dependence observed below 500 microM and showed saturation kinetics; rate constants for the slow phase were linearly dependent on substrate concentration (k(3-slow)) = 3.1 +/- 0.1 x 10(3) M(-1) s(-1)). Kinetic transients for reduction of Compound II by L-ascorbic acid for Cys32-modified rsAPX are monophasic at all substrate concentrations, and the second-order rate constant (k(3) = 0.9 +/- 0.1 x 10(3) M(-1) s(-1)) is similar to that obtained from the slow phase of Compound II reduction for unmodified rsAPX. Steady-state oxidation of L-ascorbate by rsAPX showed a sigmoidal dependence on substrate concentration and data were satisfactorily rationalized using the Hill equation; oxidation of L-ascorbic acid by Cys32-modified rsAPX showed no evidence of sigmoidal behavior. The data are consistent with the presence of two kinetically competent binding sites for ascorbate in APX.     

Nature of oxygen activation in glucose oxidase from Aspergillus niger: the importance of electrostatic stabilization in superoxide formation.

Glucose oxidase catalyzes the oxidation of glucose by molecular dioxygen, forming gluconolactone and hydrogen peroxide. A series of probes have been applied to investigate the activation of dioxygen in the oxidative half-reaction, including pH dependence, viscosity effects, 18O isotope effects, and solvent isotope effects on the kinetic parameter Vmax/Km(O2). The pH profile of Vmax/Km(O2) exhibits a pKa of 7.9 +/- 0.1, with the protonated enzyme form more reactive by 2 orders of magnitude. The effect of viscosogen on Vmax/Km(O2) reveals the surprising fact that the faster reaction at low pH (1.6 x 10(6) M-1 s-1) is actually less diffusion-controlled than the slow reaction at high pH (1.4 x 10(4) M-1 s-1); dioxygen reduction is almost fully diffusion-controlled at pH 9.8, while the extent of diffusion control decreases to 88% at pH 9.0 and 32% at pH 5.0, suggesting a transition of the first irreversible step from dioxygen binding at high pH to a later step at low pH. The puzzle is resolved by 18O isotope effects. 18(Vmax/Km) has been determined to be 1.028 +/- 0.002 at pH 5.0 and 1.027 +/- 0.001 at pH 9.0, indicating that a significant O-O bond order decrease accompanies the steps from dioxygen binding up to the first irreversible step at either pH. The results at high pH lead to an unequivocal mechanism; the rate-limiting step in Vmax/Km(O2) for the deprotonated enzyme is the first electron transfer from the reduced flavin to dioxygen, and this step accompanies binding of molecular dioxygen to the active site. In combination with the published structural data, a model is presented in which a protonated active site histidine at low pH accelerates the second-order rate constant for one electron transfer to dioxygen through electrostatic stabilization of the superoxide anion intermediate. Consistent with the proposed mechanisms for both high and low pH, solvent isotope effects indicate that proton transfer steps occur after the rate-limiting step(s). Kinetic simulations show that the model that is presented, although apparently in conflict with previous models for glucose oxidase, is in good agreement with previously published kinetic data for glucose oxidase. A role for electrostatic stabilization of the superoxide anion intermediate, as a general catalytic strategy in dioxygen-utilizing enzymes, is discussed.     

Mechanistic studies of two dioxygenases in the methionine salvage pathway of Klebsiella pneumoniae

Two dioxygenases (ARD and ARD') were cloned from Klebsiella pneumoniae that catalyze different oxidative decomposition reactions of an advanced aci-reductone intermediate, CH(3)SCH(2)CH(2)COCH(OH)=CH(OH) (I), in the methionine salvage pathway. The two enzymes are remarkable in that they have the same polypeptide sequence but bind different metal ions (Ni(2+) and Fe(2+), respectively). ARD converts I to CH(3)SCH(2)CH(2)COOH, CO, and HCOOH. ARD' converts I to CH(3)SCH(2)CH(2)COCOOH and HCOOH. Kinetic analyses suggest that both ARD and ARD' have ordered sequential mechanisms. A model substrate (II), a dethio analogue of I, binds to the enzyme first as evidenced by its lambda(max) red shift upon binding. The dianion formation from II causes the same lambda(max) red shift, suggesting that II bind to the enzyme as a dianion. The electron-rich II dianion likely reacts with O(2) to form a peroxide anion intermediate. Previous (18)O(2) and (14)C tracer experiments established that ARD incorporates (18)O(2) into C(1) and C(3) of II and C(2) is released as CO. ARD' incorporates (18)O(2) into C(1) and C(2) of II. The product distribution seems to necessitate the formation of a five-membered cyclic peroxide intermediate for ARD and a four-membered cyclic peroxide intermediate for ARD'. A model chemical reaction demonstrates the chemical and kinetic competency of the proposed five-membered cyclic peroxide intermediate. The breakdown of the four-membered and five-membered cyclic peroxide intermediates gives the ARD' and ARD products, respectively. The nature of the metal ion appears to dictate the attack site of the peroxide anion and, consequently, the different cyclic peroxide intermediates and the different oxidative cleavages of II. A cyclopropyl substrate analogue inactivates both enzymes after multiple turnovers, providing evidence that a radical mechanism may be involved in the formation of the peroxide anion intermediate.     

Pre-steady-state kinetics and modelling of the oxygenase and cyclooxygenase reactions of prostaglandin endoperoxide synthase

The pre-steady-state kinetics of the prostaglandin endoperoxide synthase oxygenase reaction with eicosadienoic acids and the cyclooxygenase reaction with arachidonic acid were investigated by stopped-flow spectrophotometry at 426 nm, an isosbestic point between native enzyme and compound I. A similar reaction mechanism for both types of catalysis is defined from combined kinetic experiments and numerical simulations. In the first step a fatty acid hydroperoxide reacts with the native enzyme to form compound I and the fatty acid hydroxide. In the second step the fatty acid reduces compound I to compound II and a fatty acid carbon radical is formed. This is followed by two fast steps: (1) the addition of either one molecule of oxygen (the oxygenase reaction) or two molecules of oxygen (the cyclooxygenase reaction) to the fatty acid carbon radical to form the corresponding hydroperoxyl radical, and (2) the reaction of the hydroperoxyl radical with compound II to form the fatty acid hydroperoxide and a compound I-protein radical. A unimolecular reaction of the compound I-protein radical to reform the native enzyme is assumed for the last step in the cycle. This is a slow reaction not significantly affecting steps 1 and 2 under pre-steady-state conditions. A linear dependence of the observed pseudo-first-order rate constant, k(obs), on fatty acid concentration is quantitatively reproduced by the model for both the oxygenase and cyclooxygenase reactions. The simulated second order rate constants for the conversion of native enzyme to compound I with arachidonic or eicosadienoic acids hydroperoxides as a substrate are 8 x 10(7) and 4 x 10(7) M(-1) s(-1), respectively. The simulated and experimentally obtained second-order rate constants for the conversion of compound I to compound II with arachidonic and eicosadienoic acids as a substrate are 1.2 x 10(5) and 3.0 x 10(5) M(-1) s(-1), respectively.     

The kinetics of binding of oxygen and carbon monoxide to Gastrophilus haemoglobin

The dimeric haemoglobin in the tracheal cells of the Gastrophilus larva was extracted and purified, and the spectral properties of its oxy- and carbon monoxide adducts are recorded. In dilute solutions the kinetic parameters of binding of oxygen and carbon monoxide were determined. In solutions between 0.1 and 50mum for oxygen k(on) is 1x10(7)m(-1).s(-1) and k(off) is 1s(-1); for carbon monoxide l(on) is 6.5x10(5)m(-1).s(-1) and l(off) is 0.14s(-1). These values are in agreement with previous equilibrium results on oxygen binding and carbon monoxide/oxygen partition. These results are discussed and compared with the known values for other monomeric protohaem proteins.     

Anions modulate the potency of geranylgeranyl-protein transferase I inhibitors

We have identified and characterized potent and specific inhibitors of geranylgeranyl-protein transferase type I (GGPTase I), as well as dual inhibitors of GGPTase I and farnesyl-protein transferase. Many of these inhibitors require the presence of phosphate anions for maximum activity against GGPTase I in vitro. Inhibitors with a strong anion dependence were competitive with geranylgeranyl pyrophosphate (GGPP), rather than with the peptide substrate, which had served as the original template for inhibitor design. One of the most effective anions was ATP, which at low millimolar concentrations increased the potency of GGPTase I inhibitors up to several hundred-fold. In the case of clinical candidate l-778,123, this increase in potency was shown to result from two major interactions: competitive binding of inhibitor and GGPP, and competitive binding of ATP and GGPP. At 5 mm, ATP caused an increase in the apparent K(d) for the GGPP-GGPTase I interaction from 20 pm to 4 nm, resulting in correspondingly tighter inhibitor binding. A subset of very potent GGPP-competitive inhibitors displayed slow tight binding to GGPTase I with apparent on and off rates on the order of 10(6) m(-)1 s(-)1 and 10(-)3 s(-)1, respectively. Slow binding and the anion requirement suggest that these inhibitors may act as transition state analogs. After accounting for anion requirement, slow binding, and mechanism of competition, the structure-activity relationship determined in vitro correlated well with the inhibition of processing of GGPTase I substrate Rap1a in vivo.     

Oxidative polymerization of ribonuclease A by lignin peroxidase from Phanerochaete chrysosporium. Role of veratryl alcohol in polymer oxidation.

The mechanism of lignin peroxidase (LiP) was examined using bovine pancreatic ribonuclease A (RNase) as a polymeric lignin model substrate. SDS/PAGE analysis demonstrates that an RNase dimer is the major product of the LiP-catalyzed oxidation of this protein. Fluorescence spectroscopy and amino acid analyses indicate that RNase dimer formation is due to the LiP-catalyzed oxidation of Tyr residues to Tyr radicals, followed by intermolecular radical coupling. The LiP-catalyzed polymerization of RNase in strictly dependent on the presence of veratryl alcohol (VA). In the presence of 100 microM H2O2, relatively low concentrations of RNase and VA, together but not individually, can protect LiP from H2O2 inactivation. The presence of RNase strongly inhibits VA oxidation to veratraldehyde by LiP; whereas the presence of VA does not inhibit RNase oxidation by LiP. Stopped-flow and rapid-scan spectroscopy demonstrate that the reduction of LiP compound I (LiPI) to the native enzyme by RNase occurs via two single-electron steps. At pH 3.0, the reduction of LiPI by RNase obeys second-order kinetics with a rate constant of 4.7 x 10(4) M-1.s-1, compared to the second-order VA oxidation rate constant of 3.7 x 10(5) M-1.s-1. The reduction of LiP compound II (LiPII) by RNase also follows second-order kinetics with a rate constant of 1.1 x 10(4) M-1.s-1, compared to the first-order rate constant for LiPII reduction by VA. When the reductions of LiPI and LiPIi are conducted in the presence of both VA and RNase, the rate constants are essentially identical to those obtained with VA alone. These results suggest that VA is oxidized by LiP to its cation radical which, while still in its binding site, oxidizes RNase.