超嗜热古菌Thermococcus eurythermalis A501编码B家族DNA聚合酶的生化特性及PCR应用

DNA聚合酶广泛应用于PCR技术,在生命科学研究及相关领域发挥重要作用。但目前商业化DNA聚合酶仍不能完全满足科研需要,有必要寻求高性能DNA聚合酶。文中克隆表达了超嗜热古菌（Thermococcus eurythermalis）A501来源的B家族DNA聚合酶基因（NCBI数据库基因登录号为TEU＿RS04875）、表征该重组蛋白的生化特性、评价了其PCR应用。将删除intein蛋白序列的DNA聚合酶（Teu-PolB）进行体外重组表达,经亲和层析和离子交换层析纯化获得Teu-PolB蛋白;利用5′端带荧光标记的寡核苷酸作为底物,用尿素变性聚丙烯酰胺凝胶电泳鉴定Teu-PolB的生化特性;以噬菌体λDNA基因组为模板,探究Teu-PolB的PCR应用。结果显示,Teu-PolB具有DNA聚合酶活性和3′→5′核酸外切酶活性,该酶在98℃下的半衰期约为2 h,热稳定性高。使用Teu-PolB进行PCR扩增,最适PCR缓冲液为50 mmol/L Tris-HCl pH 8.0,2.5 mmol/L MgCl₂,60 mmol/L KCl,10 mmol/L （NH<...     

Capacity of Nine Thermostable DNA Polymerases To Mediate DNA Amplification in the Presence of PCR-Inhibiting Samples

The PCR is an extremely powerful method for detecting microorganisms. However, its full potential as a rapid detection method is limited by the inhibition of the thermostable DNA polymerase from Thermus aquaticus by many components found in complex biological samples. In this study, we have compared the effects of known PCR-inhibiting samples on nine thermostable DNA polymerases. Samples of blood, cheese, feces, and meat, as well as various ions, were added to PCR mixtures containing various thermostable DNA polymerases. The nucleic acid amplification capacity of the nine polymerases, under buffer conditions recommended by the manufacturers, was evaluated by using a PCR-based detection method for Listeria monocytogenes in the presence of purified template DNA and different concentrations of PCR inhibitors. The AmpliTaq Gold and the Taq DNA polymerases from Thermus aquaticus were totally inhibited in the presence of 0.004% (vol/vol) blood in the PCR mixture, while the HotTub, Pwo, rTth, and Tfl DNA polymerases were able to amplify DNA in the presence of 20% (vol/vol) blood without reduced amplification sensitivity. The DNA polymerase from Thermotoga maritima (Ultma) was found to be the most susceptible to PCR inhibitors present in cheese, feces, and meat samples. When the inhibitory effect of K and Na ions was tested on the nine polymerases, HotTub from Thermus flavus and rTth from Thermus thermophilus were the most resistant. Thus, the PCR-inhibiting effect of various components in biological samples can, to some extent, be eliminated by the use of the appropriate thermostable DNA polymerase.     

Overview of thermostable DNA polymerases for classical PCR applications: from molecular and biochemical fundamentals to commercial systems

During the genomics era, the use of thermostable DNA polymerases increased greatly. Many were identified and described—mainly of the genera Thermus, Thermococcus and Pyrococcus. Each polymerase has different features, resulting from origin and genetic modification. However, the rational choice of the adequate polymerase depends on the application itself. This review gives an overview of the most commonly used DNA polymerases used for PCR application: KOD, Pab (Isis?), Pfu, Pst (Deep Vent?), Pwo, Taq, Tbr, Tca, Tfi, Tfl, Tfu, Tgo, Tli (Vent?), Tma (UITma?), Tne, Tth and others.     

In vitro replication slippage by DNA polymerases from thermophilic organisms

Replication slippage of DNA polymerases is a potential source of spontaneous genetic rearrangements in prokaryotic and eukaryotic cells. Here we show that different thermostable DNA polymerases undergo replication slippage in vitro, during single-round replication of a single-stranded DNA template carrying a hairpin structure. Low-fidelity polymerases, such as Thermus aquaticus (Taq), high-fidelity polymerases, such as Pyrococcus furiosus (Pfu) and a highly thermostable polymerase from Pyrococcus abyssi (Pyra exo(-)) undergo slippage. Thermococcus litoralis DNA polymerase (Vent) is also able to slip; however, slippage can be inhibited when its strand-displacement activity is induced. Moreover, DNA polymerases that have a constitutive strand-displacement activity, such as Bacillus stearothermophilus DNA polymerase (Bst), do not slip. Polymerases that slip during single-round replication generate hairpin deletions during PCR amplification, with the exception of Vent polymerase because its strand-displacement activity is induced under these conditions. We show that these hairpin deletions occurring during PCR are due to replication slippage, and not to a previously proposed process involving polymerization across the hairpin base.     

DNA polymerase III from Saccharomyces cerevisiae. II. Inhibitor studies and comparison with DNA polymerases I and II

The newly identified yeast DNA polymerase III was compared to DNA polymerases I and II and the mitochondrial DNA polymerase. Inhibition by aphidicolin (I50) of DNA polymerases I, II, and III was 4, 6, and 0.6 micrograms/ml, respectively. The mitochondrial enzyme was insensitive to the drug. N2-(p-n-butylphenyl)-2'-deoxyguanosine 5'-triphosphate strongly inhibited DNA polymerase I (I50 = 0.3 microM), whereas DNA polymerase III was less sensitive (I50 = 80 microM). Conditions that allowed proteolysis to proceed during the preparation of extracts converted DNA polymerase II from a sensitive form (I50 = 2.4 microM) to a resistant form (I50 = 2 mM). The mitochondrial DNA polymerase is insensitive (I50 greater than 5 mM). With most other inhibitors tested (N-ethylmaleimide, heparin, salt) only small differences were observed between the three nuclear DNA polymerases. Polyclonal antibodies to DNA polymerase III did not inhibit DNA polymerases I and II, nor were those polymerases recognized by Western blotting. Monoclonal antibodies to DNA polymerase I did not crossreact with DNA polymerases II and III. The results show that DNA polymerase III is distinct from DNA polymerase I and II.     

A new thermostable DNA polymerase mixture for efficient amplification of long DNA fragments

The thermostable DNA polymerases have been used for amplification of DNA fragments since the invention of PCR. The constraint on the maximum size of the amplified fragments can be solved to certain level by the use of unbalanced mixtures of non-proofreading and proofreading thermostable DNA polymerases. In this study, we tested the use of a mixtures of N-terminal deletional variant of Taq polymerase—Klentaq278 and Tne polymerase from Thermotoga neapolitana. Klentaq278 and Tne polymerase genes were cloned and expressed in different expression vectors under tac promoter. The most efficient ratio of Klentaq278/Tne polymerase for amplification was 10: 1. The polymerase mixture of Klentaq278 and Tne polymerase is very effective in amplification of DNA fragments for up to 8 kb and is useful addition to a DNA polymerases used in long-range PCR.     

Long and accurate PCR with a mixture of KOD DNA polymerase and its exonuclease deficient mutant enzyme

DNA polymerase from Thermococcus kodakaraensis KOD1 (previously Pyrococcus sp. KOD1) is one of the most efficient thermostable PCR enzymes exhibiting higher accuracy and elongation velocity than any other commercially available DNA polymerase [M. Takagi et al. (1997) Appl. Environ. Microbiol. 63, 4504-4510]. However, when long distance PCR (>5 kbp) was performed with KOD DNA polymerase, amplification efficiency (product yield) becomes lower because of its strong 3'-5' exonuclease activity for proof-reading. In order to improve a target length limitation in PCR, mutant DNA polymerases with decreased 3'-5' exonuclease activity were designed by substituting amino acid residues in conserved exonuclease motifs, Exo I (Asp141-Xaa-Glu), Exo II (Asn210-Xaa-Xaa-Xaa-Phe-Asp), and Exo III (Tyr311-Xaa-Xaa-Xaa-Asp). Exonuclease activity and amplification fidelity (error rate) of the DNA polymerases were altered by mutagenesis. However, long and accurate PCR by a single-type of mutant DNA polymerase was very difficult. The wild-type DNA polymerase (WT) and its exonuclease deficient mutant (N210D) were mixed in different ratio and their characteristics in PCR were examined. When the mixed enzyme (WT and N210D) was made at the ratio of 1:40, long PCR (15 kbp) at lower mutation frequency could be efficiently achieved.     

Deoxyribonucleic acid-dependent ribonucleic acid polymerases from normal and polyoma-transformed BHK-21/C13 cells.

DNA-dependent RNA polymerase (EC 2.7.7.6) ACTIVITIES FROM NORMAL BHK-21/C13 cells and from BHK-21/C13 cells transformed by polyoma virus (PYY cells) were solubilized and fractionated on columns of DEAE-Sephadex. Various properties of the A and B enzymes from the two types of cell were compared. 1. The yields of polymerase relative to the DNA content of the nuclear preparations are similar for both cell types. 2. The ionic-strength optima of polymerases A and B are 12.5 mM and 100mM with respect to (NH4)2SO4 for both cell types. 3. The Mn2+/Mg2+ activity ratio (measured at the respective optimum for each cation) for polymerase A from BHK-21/C13 cells was 1.48 and for the polymerase A from PYY cells was 0.55. The corresponding ratios for polymerase B were 10.11 for BHK-21/C13 cells and 22.75 for PYY cells. 4. Minor differences in the ability of the A polymerases to transcribe native and denatured DNA templates were observed; such differences were not apparent when the B polymerases were compared. 5. All the polymerases were inhibited completely by actinomycin D and by rifampicin AF/013, but not markedly so by rifampicin. Alpha-amanitin inhibited polymerase B but not polymerase A.     

Novel thermostable Y-family polymerases: applications for the PCR amplification of damaged or ancient DNAs

For many years, Taq polymerase has served as the stalwart enzyme in the PCR amplification of DNA. However, a major limitation of Taq is its inability to amplify damaged DNA, thereby restricting its usefulness in forensic applications. In contrast, Y-family DNA polymerases, such as Dpo4 from Sulfolobus solfataricus, can traverse a wide variety of DNA lesions. Here, we report the identification and characterization of five novel thermostable Dpo4-like enzymes from Acidianus infernus, Sulfolobus shibatae, Sulfolobus tengchongensis, Stygiolobus azoricus and Sulfurisphaera ohwakuensis, as well as two recombinant chimeras that have enhanced enzymatic properties compared with the naturally occurring polymerases. The Dpo4-like polymerases are moderately processive, can substitute for Taq in PCR and can bypass DNA lesions that normally block Taq. Such properties make the Dpo4-like enzymes ideally suited for the PCR amplification of damaged DNA samples. Indeed, by using a blend of Taq and Dpo4-like enzymes, we obtained a PCR amplicon from ultraviolet-irradiated DNA that was largely unamplifyable with Taq alone. The inclusion of thermostable Dpo4-like polymerases in PCRs, therefore, augments the recovery and analysis of lesion-containing DNA samples, such as those commonly found in forensic or ancient DNA molecular applications.     

Characterization of DNA polymerase from the hyperthermophilic archaeon Thermococcus marinus and its application to PCR

The family B DNA polymerase gene from the archaeon Thermococcus marinus (Tma) contains a long open reading frame of 3,939 bp that encodes 1,312 amino acid residues. The gene is split by one intervening sequence that forms a continuous open reading frame with the two polymerase exteins. In this study, the Tma DNA polymerase gene both with (precursor form) and without (mature form) its intein was expressed in Escherichia coli, purified by heat treatment and HiTrap™ Heparin HP column chromatography and characterized. Primary sequence analysis of the mature Tma polymerase showed high sequence identity with DNA polymerases in the genus Thermococcus. The expressed precursor form was easily spliced during purification steps. The molecular mass of the purified Tma DNA polymerases is about 90 kDa, as estimated by SDS-PAGE. Both Tma DNA polymerases showed the same properties. PCR performed with this enzyme was found to be optimal in the presence of 50 mM Tris–HCl (pH 8.4), 40 mM KCl, 12.5 mM (NH₄)₂SO_4, 2 mM MgCl_2, 0.05% Triton X-100 and 0.0075% BSA. Furthermore, long-range PCR and time-saving PCR were performed using various specific ratios of Taq and Tma DNA polymerases (Tma plus DNA polymerase).     

Fidelity of DNA synthesis by the Thermococcus litoralis DNA polymerase--an extremely heat stable enzyme with proofreading activity

We demonstrate that the DNA polymerase isolated from Thermococcus litoralis (VentTM DNA polymerase) is the first thermostable DNA polymerase reported having a 3'----5' proofreading exonuclease activity. This facilitates a highly accurate DNA synthesis in vitro by the polymerase. Mutational frequencies observed in the base substitution fidelity assays were in the range of 30 x 10(-6). These values were 5-10 times lower compared to other thermostable DNA polymerases lacking the proofreading activity. All classes of DNA polymerase errors (transitions, transversions, frameshift mutations) were assayed using the forward mutational assay (1). The mutation frequencies of Thermococcus litoralis DNA polymerase varied between 15-35 x 10(-4) being 2-4 times lower than the respective values obtained using enzymes without proofreading activity. We also noticed that the fidelity of the DNA polymerase from Thermococcus litoralis responds to changes in dNTP concentration, units of enzyme used per one reaction and the concentration of MgSO4 relative to the total concentration of dNTPs present in the reaction. The high fidelity DNA synthesis in vitro by Thermococcus litoralis DNA polymerase provides good possibilities for maintaining the genetic information of original target DNA sequences intact in the DNA amplification applications.     

PCR fidelity of pfu DNA polymerase and other thermostable DNA polymerases.

The replication fidelities of Pfu, Taq, Vent, Deep Vent and UlTma DNA polymerases were compared using a PCR-based forward mutation assay. Average error rates (mutation frequency/bp/duplication) increased as follows: Pfu (1.3 x 10(-6)) < Deep Vent (2.7 x 10(-6)) < Vent (2.8 x 10(-6)) < Taq (8.0 x 10(-6)) < < exo- Pfu and UlTma (approximately 5 x 10(-5)). Buffer optimization experiments indicated that Pfu fidelity was highest in the presence of 2-3 mM MgSO4 and 100-300 microM each dNTP and at pH 8.5-9.1. Under these conditions, the error rate of exo- Pfu was approximately 40-fold higher (5 x 10(-5)) than the error rate of Pfu. As the reaction pH was raised from pH 8 to 9, the error rate of Pfu decreased approximately 2-fold, while the error rate of exo- Pfu increased approximately 9-fold. An increase in error rate with pH has also been noted for the exonuclease-deficient DNA polymerases Taq and exo- Klenow, suggesting that the parameters which influence replication error rates may be similar in pol l- and alpha-like polymerases. Finally, the fidelity of 'long PCR' DNA polymerase mixtures was examined. The error rates of a Taq/Pfu DNA polymerase mixture and a Klentaq/Pfu DNA polymerase mixture were found to be less than the error rate of Taq DNA polymerase, but approximately 3-4-fold higher than the error rate of Pfu DNA polymerase.     

Systematic analysis of enzymatic DNA polymerization using oligo-DNA templates and triphosphate analogs involving 2',4'-bridged nucleosides

In order to systematically analyze the effects of nucleoside modification of sugar moieties in DNA polymerase reactions, we synthesized 16 modified templates containing 2',4'-bridged nucleotides and three types of 2',4'-bridged nucleoside-5'-triphospates with different bridging structures. Among the five types of thermostable DNA polymerases used, Taq, Phusion HF, Vent(exo-), KOD Dash and KOD(exo-), the KOD Dash and KOD(exo-) DNA polymerases could smoothly read through the modified templates containing 2'-O,4'-C-methylene-linked nucleotides at intervals of a few nucleotides, even at standard enzyme concentrations for 5 min. Although the Vent(exo-) DNA polymerase also read through these modified templates, kinetic study indicates that the KOD(exo-) DNA polymerase was found to be far superior to the Vent(exo-) DNA polymerase in accurate incorporation of nucleotides. When either of the DNA polymerase was used, the presence of 2',4'-bridged nucleotides on a template strand substantially decreased the reaction rates of nucleotide incorporations. The modified templates containing sequences of seven successive 2',4'-bridged nucleotides could not be completely transcribed by any of the DNA polymerases used; yields of longer elongated products decreased in the order of steric bulkiness of the modified sugars. Successive incorporation of 2',4'-bridged nucleotides into extending strands using 2',4'-bridged nucleoside-5'-triphospates was much more difficult. These data indicate that the sugar modification would have a greater effect on the polymerase reaction when it is adjacent to the elongation terminus than when it is on the template as well, as in base modification.     

Fidelity of Thermococcus litoralis DNA polymerase (Vent) in PCR determined by denaturing gradient gel electrophoresis.

DNA synthesis fidelities of two thermostable DNA polymerases, Thermus aquaticus (Taq) and Thermococcus litoralis (Tli, also known as Vent), and a non-thermostable enzyme, a modified T7 DNA polymerase (Sequenase), were determined by analyzing polymerase chain reaction (PCR) products using denaturing gradient gel electrophoresis (DGGE). The error rates were 4.4, 8.9, and 2.4 x 10(-5) errors/bp for modified T7, Taq, and Tli polymerase, respectively. Reducing the nucleotide triphosphate concentration for Tli polymerase during PCR did not alter the fidelity. The ability of DGGE to detect a mutant present at several percent in a wild type population is related to the polymerase fidelity. To examine the sensitivity of mutant detection, human genomic DNA containing a 1% fraction of a known base pair substitution mutant was PCR-amplified with the three enzymes using primers that flank the mutant sequence. The PCR products were analyzed by DGGE. The signal from the mutant present at 1% was visible in the samples amplified with modified T7 and Tli polymerase, but the higher error rate of Taq polymerase did not permit visualization of the signal in DNA amplified with Taq polymerase.     

Polymerase chain reaction optimization for amplification of Guanine-Cytosine rich templates using buccal cell DNA

CONTEXT:

Amplification of Guanine-Cytosine (GC) -rich sequences becomes important in screening and diagnosis of certain genetic diseases such as diseases arising due to expansion of GC-rich trinucleotide repeat regions. However, GC-rich sequences in the genome are refractory to standard polymerase chain reaction (PCR) amplification and require a special reaction conditions and/or modified PCR cycle parameters.

AIM:

Optimize a cost effective PCR assay to amplify the GC-rich DNA templates.

SETTINGS AND DESIGN:

Fragile X mental retardation gene (FMR 1) is an ideal candidate for PCR optimization as its GC content is more than 80%. Primers designed to amplify the GC rich 5’ untranslated region of the FMR 1 gene, was selected for the optimization of amplification using DNA extracted from buccal mucosal cells.

MATERIALS AND METHODS:

A simple and rapid protocol was used to extract DNA from buccal cells. PCR optimization was carried out using three methods, (a) substituting a substrate analog 7-deaza-dGTP to dGTP (b) in the presence of a single PCR additive and (c) using a combination of PCR additives. All PCR amplifications were carried out using a low-cost thermostable polymerase.

RESULTS:

Optimum PCR conditions were achieved when a combination of 1M betaine and 5% dimethyl sulfoxide (DMSO) was used.

CONCLUSIONS:

It was possible to amplify the GC rich region of FMR 1 gene with reproducibility in the presence of betaine and DMSO as additives without the use of commercially available kits for DNA extraction and the expensive thermostable polymerases.     

A polymerase engineered for bisulfite sequencing

Bisulfite sequencing is a key methodology in epigenetics. However, the standard workflow of bisulfite sequencing involves heat and strongly basic conditions to convert the intermediary product 5,6-dihydrouridine-6-sulfonate (dhU6S) (generated by reaction of bisulfite with deoxycytidine (dC)) to uracil (dU). These harsh conditions generally lead to sample loss and DNA damage while milder conditions may result in incomplete conversion of intermediates to uracil. Both can lead to poor recovery of bisulfite-treated DNA by the polymerase chain reaction (PCR) as either damaged DNA and/or intermediates of bisulfite treatment are poor substrate for standard DNA polymerases. Here we describe an engineered DNA polymerase (5D4) with an enhanced ability to replicate and PCR amplify bisulfite-treated DNA due to an ability to bypass both DNA lesions and bisulfite intermediates, allowing significantly milder conversion conditions and increased sensitivity in the PCR amplification of bisulfite-treated DNA. Incorporation of the 5D4 DNA polymerase into the bisulfite sequencing workflow thus promises significant sensitivity and efficiency gains.     

Residual DNA in thermostable DNA polymerases - a cause of irritation in diagnostic PCR and microarray assays.

In a validation trial of a DNA microarray test for chlamydiae we repeatedly observed false-positive PCR amplicons from truly negative samples and non-template controls. Various PCR tests, microarray hybridization and DNA sequencing, revealed that residual Escherichia coli DNA from thermostable DNA polymerases was the cause of this cross-reaction. A subsequent survey showed that only five out of 23 commercial polymerases were free of E. coli DNA. When designing generic oligonucleotide sequences for PCR and PCR microarray-based assays one should be aware of such possible internal contamination, particularly when the target organism is E. coli.