The lipase-catalyzed synthesis of carbamoyloxyethyl methacrylate

Summary The first example of an enzymatic synthesis of 2-carbamoyloxyethyl methacrylate by a lipase-catalyzed transesterification of 2-hydroxyethylcarbamate with vinyl methacrylate in organic solvent is reported. Using the lipase PS-30 from the Pseudomonas species under optimal conditions, a temperature of 50 °C and a solvent mixture (3:1) toluene/THF, carbamoyloxyethyl methacrylate is produced at a quantitative yield in 72 hours.     

Wood pulp as an immobilization matrix for the continuous production of isopropanol and butanol

The study was focused on developing a continuous method to produce an alcohol mixture suitable to be used as a gasoline supplement. The immobilized column reactor with wood pulp fibers was successfully used for the continuous production of butanol and isopropanol using Clostridium beijerinckii DSM 6423. A sugar mixture (glucose, mannose, galactose, arabinose and xylose) representing lignocellulose hydrolysate was used as a substrate for the production of solvents. The effect of dilution rate on solvent production was studied during continuous operation. The maximum total solvent concentration of 11.99 g/l was obtained at a dilution rate of 0.16 h^?1. The maximum solvent productivity (5.58 g/l h) was obtained at a dilution rate of 1.5 h^?1. The maximum solvent yield of 0.45 g/g from sugar mixture was observed at 0.25 h^?1. The system will be further used for the solvent production using wood hydrolysate as a substrate.     

A mixture theory for charged-hydrated soft tissues containing multi-electrolytes: passive transport and swelling behaviors.

A new mixture theory was developed to model the mechano-electrochemical behaviors of charged-hydrated soft tissues containing multi-electrolytes. The mixture is composed of n + 2 constituents (1 charged solid phase, 1 noncharged solvent phase, and n ion species). Results from this theory show that three types of force are involved in the transport of ions and solvent through such materials: (1) a mechanochemical force (including hydraulic and osmotic pressures); (2) an electrochemical force; and (3) an electrical force. Our results also show that three types of material coefficients are required to characterize the transport rates of these ions and solvent: (1) a hydraulic permeability; (2) mechano-electrochemical coupling coefficients; and (3) an ionic conductance matrix. Specifically, we derived the fundamental governing relationships between these forces and material coefficients to describe such mechano-electrochemical transduction effects as streaming potential, streaming current, diffusion (membrane) potential, electro-osmosis, and anomalous (negative) osmosis. As an example, we showed that the well-known formula for the resting cell membrane potential (Hodgkin and Huxley, 1952a, b) could be derived using our new n + 2 mixture model (a generalized triphasic theory). In general, the n + 2 mixture theory is consistent with and subsumes all previous theories pertaining to specific aspects of charged-hydrated tissues. In addition, our results provided the stress, strain, and fluid velocity fields within a tissue of finite thickness during a one-dimensional steady diffusion process. Numerical results were provided for the exchange of Na+ and Ca++ through the tissue. These numerical results support our hypothesis that tissue fixed charge density (CF) plays a significant role in modulating kinetics of ions and solvent transport through charged-hydrated soft tissues.     

Efficient lipase catalysed production of a lubricant and surfactant formulation using a continuous solvent-free process

The transesterification of sunflower oil with a high oleic acid residue content (typically 83.5%) with butanol-1 by immobilised Lipozyme was carried out in a solvent free system and in a continuous way. During the first 6 h of reactor operation, a transition phase was observed, in which the main products were butyl ester and glycerol. This latter being insoluble in the reaction mixture, it is adsorbed onto the enzyme support thus leading to a decrease in enzyme performance. Step by step, less and less glycerol is produced and finally when glycerol is no longer produced a steady state is attained. The product composition is a mixture of butyl ester (65 molar%), monoglyceride (26 molar%), diglyceride (6 molar%) and residual triglyceride (3 molar%). This mixture has interesting lubricant and surfactant properties. The reactor was maintained without any loss in activity for a period of 3 months. This result is very different to that obtained using an organic solvent (n-hexane) which leads to a total loss of enzyme activity within a few hours.     

DNA, rRNA and RNA partition isotherms rapidly labeled in a saline solvent system

Partition isotherms of DNA, rRNA, and rapidly labeled RNA in a salt solvent system are determined. In the salt solvent system PMB (potassium phosphate buffer 1.50 M pH 7.0:2-methoxyethanol:2-butoxyethanol; 3:1:variable volume), equilibrated at the temperature T, the partition isotherms of animal ribosomal RNA and DNA form a series of straight lines according to the basic relation log k = B ? A_T(BuO), where k is the partition coefficient, B and A_T are parameters depending upon the base composition, the molecular weight, the helix content, and conformation of nucleic acids, and (BuO) refers to the 2-butoxyethanol amount in volume percent. This relation is also valid for other nucleic acid compounds (bases, nucleosides, nucleotides, oligoribonucleotides, and transfer RNA). For RNA fractions distributed in different Kirby salt solvent systems, log k is proportional to the relative levels of adenine and guanine expressed as the A/(A+G) ratio. Partition isotherms of high molecular weight RNA from mouse plasmocytoma, labeled during a few hours, are not straight lines. This behavior indicates a heterogeneous RNA population. By plotting the specific activity of this mixture (rRNA and rapidly labeled RNA) determined in the top phase of our salt solvent system as a function of the 2-but-oxyethanol content, we obtained a sigmoidal curve, which characterizes the nature of the RNA population investigated. Formulas are given for the calculation of the specific activities of rRNA and rapidly labeled RNA and for the calculation of their relative ratio.     

Purification of optical imaging ligand-Cybesin by high-speed counter-current chromatography

Fluorescent Cybesin (Cypate-Bombesin Peptide Analogue Conjugate) was synthesized from Indocyanine Green (ICG) and the bombesin receptor ligand as a contrast agent for detecting pancreas tumors. However, the LC-MS analysis indicated that the target compound was only a minor component in the reaction mixture. Since preparative HPLC can hardly separate such a small amount of the target compound directly from the original crude reaction mixture without a considerable adsorptive loss onto the solid support, high-speed counter-current chromatography (HSCCC) was used for purification since the method uses no solid support and promises high sample recovery. A suitable two-phase solvent system composed of hexane/ethyl acetate/methanol/methyl t-butyl ether/acetonitrile/water) at a volume ratio of 1:1:1:4:4:7 was selected based on the partition coefficient of Cybesin (K≈0.9) determined by LC-MS. The separation was performed in two steps using the same solvent system with lower aqueous mobile phase. From 400 mg of the crude reaction mixture the first separation yielded 7.7 mg of fractions containing the target compound at 12.8% purity, and in the second run 1 mg of Cybesin was obtained at purity of 94.0% with a sample recovery rate of over 95% based on the LC-MS analysis.     

The acyl lipid composition of wheat leaves and moss protonemata using a new, non-carcinogenic extraction solvent system

As chloroform has proved to be carcinogenic we were looking for an alternative solvent system for chloroform:methanol widely used in plant lipid investigations. The lipids from leaves of wheat ( Triticum aestivum L. cv. Vakka) and from protonemata of the moss Ceratodon purpureus (Hedw.) Brid. were extracted with two petroleum ether:methanol solvent systems. The polar lipids were separated by two-dimensional thin-layer chromatography and the amounts of each lipid class were compared with those obtained from chloroform:methanol (2:1, v/v) extractions. The significantly higher amounts of phosphatidylinositol observed in petroleum ether:methanol (1:1, v/v) extraction suggest that the small amounts reported earlier in plants may be an artefact relating to the solvent system used. As petroleum ether:methanol (1:1, v/v) proved to be at least as good a solvent system as chloroform:methanol (2:1, v/v) we propose it as an alternative extractant for plant polar lipids.     

Changes in the coordination geometry of the active-site metal during catalysis of benzylpenicillin hydrolysis by Bacillus cereus beta-lactamase II

Rapid-scanning stopped-flow spectroscopy (425-700 nm) has been used to study spectral changes in cobalt(II)-substituted Bacillus cereus beta-lactamase II during the binding and hydrolysis of benzylpenicillin. The experiments were carried out in aqueous solution over a temperature range of 3-20 degrees C. Three metallointermediates have been characterized by their visible absorption spectra. Two of them have visible absorption spectra identical with the intermediates ES1 and ES2 previously observed at subzero temperatures in a mixed aqueous/organic solvent [Bicknell, R., & Waley, S.G. (1985) Biochemistry 24, 6876-6887]. In addition, the branched kinetic pathway observed with the zinc(II) and cobalt(II) beta-lactamase II at subzero temperatures has been shown to occur with the cobalt(II)-substituted enzyme in aqueous solution at above-zero temperatures; thus, at pH 6.0 and 3 degrees C, the rate and equilibrium constants are readily determined for the reaction scheme: (Formula: see text). A third transient intermediate (called ES*) was found to precede ES1 in the pre-steady-state time period. The identity of the intermediates formed in aqueous solution with those previously observed in the cryostudy confirms that the mechanism is not changed either by the presence of an organic cosolvent or by subzero temperatures. Further characterization of ES1 and the steady-state intermediate ES2 at subzero temperatures, where their lifetime may be extended for up to several hours, has involved circular and magnetic circular dichroic studies. The magnetic circular dichroic spectra identify changes in the coordination sphere of the active-site metal during catalysis.(ABSTRACT TRUNCATED AT 250 WORDS)     

Design and evaluation of deformable talc agglomerates prepared by crystallo-Co-agglomeration technique for generating heterogenous matrix

The crystallo-co-agglomeration technique was used to design directly compressible and deformable agglomerates of talc containing the low-dose drug bromhexine hydrochloride (BXH). The process of agglomeration involved the use of dichloromethane as a good solvent and bridging liquid for BXH, water as a poor solvent, talc as diluent, and Tween 80 to aid dispersion of BXH and diluent into the poor solvent. Hydroxypropyl methylcellulose (50 cps) 4% wt/wt was used to impart the desired mechanical strength and polyethylene glycol 6000 5% wt/wt was used to impart the desired sphericity to the agglomerates. Clarity of the supernatant was considered an endpoint for completion of the agglomeration process. The drug-to-talc ratio in optimized batch 1 (BT1) and batch 2 (BT2) was kept at 1:15.66 and 1:24, respectively. The spherical agglomerates obtained were evaluated for topographic, micromeritic, mechanical, deformation, compressional, and drug release properties. The agglomeration yield and drug entrapment for both batches were above 94% wt/wt. Crushing strength and friability studies showed good handling qualities of agglomerates. Heckel plot studies showed low mean yield pressure and high tensile strength, indicating excellent compressibility and compactibility of agglomerates. Diametral and axial fracture of compacts showed deformation of agglomerates revealing formation of a heterogeneous compact. Drug release was sustained for 9 hours and 5 hours from BT1 and BT2, respectively, in 0.1N HCl. Hence, the crystallo-co-agglomeration technique can be successfully used for obtaining spherical, deformable, and directly compressible agglomerates, generating a heterogeneous matrix system and providing sustained drug release. Published: July 27, 2007     

Combinative application of pH-zone-refining and conventional high-speed counter-current chromatography for preparative separation of alkaloids from Stephania kwangsiensis

A method which involves the combination of pH-zone-refining counter-current chromatography (pH-zone-refining CCC) and conventional high-speed counter-current chromatography (HSCCC) was established for the preparative separation of alkaloids from the crude extracts of Stephania kwangsiensis. pH-zone-refining CCC was first performed with the solvent system composed of n-hexane-ethyl acetate-methanol-water (3:7:1:9, v/v), where triethylamine (10 mM) was added to the upper organic stationary phase as a retainer and hydrochloric acid (5 mM) to the aqueous mobile phase as an eluter. From 2.0 g of crude extract, 370 mg of sinoacutine and 600 mg of a mixture of three other alkaloids were obtained. Then, the mixture was further separated by conventional HSCCC with the solvent system composed of n-hexane-ethyl acetate-methanol-water (7:3:6:4, v/v), yielding 42 mg of (-)-crebanine, 50 mg of (-)-stephanine and 30 mg of l-romerine from 150 mg mixture of three other alkaloids, respectively. The purities of the four compounds were all over 98% as determined by HPLC, and the chemical structures of the four compounds were confirmed by positive ESI-MS and (1)H NMR data. Results of the present study successfully indicated that this method was efficient for the preparative separation of alkaloids from natural plants.     

Design and evaluation of deformable talc agglomerates prepared by crystallo-co-agglomeration technique for generating heterogeneous matrix

The crystallo-co-agglomeration technique was used to design directly compressible and deformable agglomerates of talc containing the low-dose drug bromhexine hydrochloride (BXH). The process of agglomeration involved the use of dichloromethane as a good solvent and bridging liquid for BXH, water as a poor solvent, talc as diluent, and Tween 80 to aid dispersion of BXH and diluent into the poor solvent. Hydroxypropyl methylcellulose (50 cps) 4% wt/wt was used to impart the desired mechanical strength and polyethylene glycol 6000 5% wt/wt was used to impart the desired sphericity to the agglomerates. Clarity of the supernatant was considered an endpoint for completion of the agglomeration process. The drug-to-talc ratio in optimized batch 1 (BT1) and batch 2 (BT2) was kept at 1:15.66 and 1:24, respectively. The spherical agglomerates obtained were evaluated for topographic, micromeritic, mechanical, deformation, compressional, and drug release properties. The agglomeration yield and drug entrapment for both batches were above 94% wt/wt. Crushing strength and friability studies showed good handling qualities of agglomerates. Heckel plot studies showed low mean yield pressure and high tensile strength, indicating excellent compressibility and compactibility of agglomerates. Diametral and axial fracture of compacts showed deformation of agglomerates revealing formation of a heterogeneous compact. Drug release was sustained for 9 hours and 5 hours from BT1 and BT2, respectively, in 0.1N HCl. Hence, the crystallo-co-agglomeration technique can be successfully used for obtaining spherical, deformable, and directly compressible agglomerates, generating a heterogeneous matrix system and providing sustained drug release.     

Enzymatic production of ceramide from sphingomyelin

Due to its major role in maintaining the water-retaining properties of the epidermis, ceramide is of great commercial potentials in cosmetic and pharmaceutical industries such as in hair and skin care products. Chemical synthesis of ceramide is a costly process, and developments of alternative cost-efficient production methods are of great interest. Present study was the first attempt to perform a systematic study on the production of ceramide through enzymatic hydrolysis of sphingomyelin. Sphingomyelin hydrolysis proved to be more efficient in two-phase (water:organic solvent) system than in one-phase (water-saturated organic solvent) system. Among the screened phospholipase C, the Clostridium perfringens enzyme had the highest sphingomyelin conversion rate, with very small temperature dependence. Addition of ethanol to the system markedly enhanced the rate of ceramide formation, and a mixture of ethylacetate:hexane (50:50) was the best organic solvent tested. Other factors such as (NH(4))(2)SO(4), NaCl and CaCl(2) were also tested but excluded for further consideration. On the basis of the initial experiments, the reaction system was optimized using response surface methodology including five factors (enzyme amount, water amount, ethanol amount, reaction time and the hexane ratio of organic solvent). Water content and enzyme amount was shown to have the most significant influence on the hydrolysis reaction in the fitted quadratic model. The efficiency of sphingomyelin hydrolysis was dramatically improved through system evaluation and optimization, with the optimal conditions at 75 min reaction time, 3 Uml(-1) enzyme amount, 6% water amount, 1.8% ethanol amount and 46% hexane in ethylacetate.     

Interaction of copper(II) with the fungal metabolite, citrinin.

Copper(II) reacts with citrinin to form 1:1 and 1:2 chelates. The formation constants of these copper(II) chelates have been determined in the solvent 50% (v/v) dioxane-water. Citrinin in the solid state is a p-quinone methide. It may exist as an equilibrium mixture of the p-quinone and o-quinone methides in solution. The experimental evidence indicates that upon chelate formation it exists predominantly in the o-quinone form.     

Lipase-catalyzed synthesis of phenolic lipids from fish liver oil and dihydrocaffeic acid

The enzymatic synthesis of phenolic lipids by lipase-catalyzed transesterification of dihydrocaffeic acid (DHCA) with fish liver oil was investigated in a selected organic solvent medium. These synthesized phenolic lipids have potential use as nutraceutical products. Using a molar ratio of 1:8 DHCA to fish liver oil in hexane:2-butanone mixtures of 75:25 and 85:15 (v/v), the lipase-catalyzed reaction resulted in maximum conversion of 55.8 and 65.4%, respectively. The maximum conversion of phenolic monoacylglycerols in hexane:2-butanone mixture of 75:25 and 85:15 (v/v) was 40.3 and 37.7%, respectively; using the same solvent mixtures, the conversions of the phenolic diacylglycerol were 15.8 and 36.8%, respectively. Hexane:2-butanone mixture of 75:25 (v/v) was, therefore, the best organic solvent mixture for the production of phenolic monoacylglycerols, while that of 85:15 (v/v) was best for the production of phenolic diacylglycerols. The phenolic lipids produced from the fish liver oil and DHCA demonstrated antioxidant property as indicated by its free radical scavenging capacity.     

Dehydrogenation of 2-imidazolines with sodium periodate catalyzed by manganese(III) tetraphenylporphyrin

In the present work, dehydrogenation of 2-substituted imidazolines with sodium periodate in the presence of tetraphenylporphyrinatomanganese(III) chloride, [Mn(TPP)Cl], is reported. A wide variety of 2-imidazolines efficiently converted to their corresponding imidazoles by [Mn(TPP)Cl]/NaIO₄ catalytic system at room temperature in 1:2, CH₃CN/H₂O mixture. The effect of reaction parameters such as kind of solvent and catalyst amount was also investigated.     

Lipase-catalyzed synthesis of phenolic lipids from fish liver oil and dihydrocaffeic acid

The enzymatic synthesis of phenolic lipids by lipase-catalyzed transesterification of dihydrocaffeic acid (DHCA) with fish liver oil was investigated in a selected organic solvent medium. These synthesized phenolic lipids have potential use as nutraceutical products. Using a molar ratio of 1:8 DHCA to fish liver oil in hexane:2-butanone mixtures of 75:25 and 85:15 (v/v), the lipase-catalyzed reaction resulted in maximum conversion of 55.8 and 65.4%, respectively. The maximum conversion of phenolic monoacylglycerols in hexane:2-butanone mixture of 75:25 and 85:15 (v/v) was 40.3 and 37.7%, respectively; using the same solvent mixtures, the conversions of the phenolic diacylglycerol were 15.8 and 36.8%, respectively. Hexane:2-butanone mixture of 75:25 (v/v) was, therefore, the best organic solvent mixture for the production of phenolic monoacylglycerols, while that of 85:15 (v/v) was best for the production of phenolic diacylglycerols. The phenolic lipids produced from the fish liver oil and DHCA demonstrated antioxidant property as indicated by its free radical scavenging capacity.     

The activity coefficient of high density systems with hard-sphere interactions: the application of the IGCMC method

The inverse grand-canonical Monte Carlo (IGCMC) technique is used to calculate the activity coefficients of the following hard-sphere systems: one-component fluid, binary mixture and solvent primitive model (SPM) electrolyte. The calculations for a one-component fluid are performed at different densities. The components of a binary mixture differ in diameters (300 and 500 pm) with the results being presented for different density and composition of a mixture. For the SPM model, simulations are performed for a 1:1 electrolyte at different electrolyte concentrations at the packing fraction equal to 0.3. Ions and solvent molecules of the same or different sizes are considered. The results are compared with those reported by Adams (one-component fluid), with those calculated using the Ebeling and Scherwinski equation (one-component fluid and binary mixture) and with the predictions from the symmetric Poisson–Boltzmann theory and the mean spherical approximation (SPM electrolyte).     

新体系下茴脑臭氧化反应制取茴香醛(英文)

以茴脑为原料,乙酸乙酯和水为新型混合溶剂,室温下通过臭氧化分解反应制取茴香醛,并对比了该体系下和传统溶剂体系下茴香醛产率的差别。实验考察了溶剂种类、溶剂用量、臭氧气流量、混合溶剂中水含量和反应时间等工艺参数,并通过红外光谱和紫外分光光度计对反应机理进行了探讨验证。该反应在水的存在下实现了室温下一锅法合成茴香醛,产率可达81.7%,避免了茴脑臭氧化物的分离及还原步骤,工艺简单,洁净环保。     

Oats tempeh

Oats was used as a substrate in tempeh fermentation. The time needed to obtain sufficient mold growth was at least 30 hours at 31°C (Rhizopus oligosporus NRRL 2710). pH was decreasing during the first 32 hours of incubation reaching pH = 5.30. Fermentation of oats led to an increase in water soluble nitrogen, but it did not change protein nitrogen content. R. oligosporus proteinases of optimum pH = 5.50 are postulated to play an important role in oats tempeh fermentation. When a mixture of oats and soybean (1:1) was used, mold growth was faster and the cake tougher. Mixing cereals with legumes to produce good tempeh is recommended.     

Evaluation of the extraction and purification procedures of the maleyl derivatization HPLC technique for the quantification of the fumonisin B mycotoxins in corn cultures

The extraction and purification methods used in the maleyl derivatization HPLC technique was evaluated with respect to the pH of the extraction mixture, the extraction solvent and the purification methods used in order to determine optimum conditions for quantification of fumonisins B₁, B₂, and B₃ in corn cultures. The highest recovery of the three compounds was obtained by extraction at pH 3.5 with CH₃OH–H₂0 (3∶1), whilst the subsequent solvent partitioning and reversedphase C₁₈ Sep-pak purification have been shown to be very important in the quantification of the fumonisins in the corn cultures. The percentage recovery of the improved technique, utilizing a gradient HPLC solvent system for the simultaneous determination of the fumonisins, was 93.4% for FB₁, 68.0% for FB₂, and 82.6% for FB₃. The study indicates that the polarity of the fumonisins and consequently their solubility during extraction as well as their behavior during the subsequent purification step play an important role in quantification of these mycotoxins in corn cultures.