X-ray crystal structures of the oxidized and reduced forms of the rubredoxin from the marine hyperthermophilic archaebacterium Pyrococcus furiosus.

The structures of the oxidized and reduced forms of the rubredoxin from the archaebacterium, Pyrococcus furiosus, an organism that grows optimally at 100 degrees C, have been determined by X-ray crystallography to a resolution of 1.8 A. Crystals of this rubredoxin grow in space group P2(1)2(1)2(1) with room temperature cell dimensions a = 34.6 A, b = 35.5 A, and c = 44.4 A. Initial phases were determined by the method of molecular replacement using the oxidized form of the rubredoxin from the mesophilic eubacterium, Clostridium pasteurianum, as a starting model. The oxidized and reduced models of P. furiosus rubredoxin each contain 414 nonhydrogen protein atoms comprising 53 residues. The model of the oxidized form contains 61 solvent H2O oxygen atoms and has been refined with X-PLOR and TNT to a final R = 0.178 with root mean square (rms) deviations from ideality in bond distances and bond angles of 0.014 A and 2.06 degrees, respectively. The model of the reduced form contains 37 solvent H2O oxygen atoms and has been refined to R = 0.193 with rms deviations from ideality in bond lengths of 0.012 A and in bond angles of 1.95 degrees. The overall structure of P. furiosus rubredoxin is similar to the structures of mesophilic rubredoxins, with the exception of a more extensive hydrogen-bonding network in the beta-sheet region and multiple electrostatic interactions (salt bridge, hydrogen bonds) of the Glu 14 side chain with groups on three other residues (the amino-terminal nitrogen of Ala 1; the indole nitrogen of Trp 3; and the amide nitrogen group of Phe 29). The influence of these and other features upon the thermostability of the P. furiosus protein is discussed.     

Rubredoxin from Desulfovibrio gigas. A molecular model of the oxidized form at 1.4 A resolution

The crystal structure of rubredoxin from the sulfate-reducing bacterium Desulfovibrio gigas has been determined at 1.4 A resolution (1 A = 0.1 nm) by X-ray diffraction methods; starting with a model of the isostructural rubredoxin from Desulfovibrio vulgaris. Refinement of the molecular model has been carried out by restrained least-squares techniques and Fourier series calculations. The present model includes a formyl at the N-terminal end and 121 possible sites for solvent molecules with full or partial occupancy, which corresponds to the modeling of nearly all the solvent medium. The crystallographic R factor against the data with 10 A greater than d greater than 1.4 A with F greater than 2 sig(F), is 0.136; and R = 0.140 when all the data are considered. The estimated average root-mean-square (r.m.s.) error on the positional parameters is about 0.12 A. The overall structural features of this molecule are close to those of the two highly refined rubredoxins from Clostridium pasteurianum and D. vulgaris. Superposition of these two molecules on the rubredoxin from D. gigas shows in both cases an overall r.m.s. deviation of 0.5 A for the atoms in the main-chain and of 0.4 A for the atoms in the side-chains that make up the hydrophobic core. The iron atom is co-ordinated to four cysteine sulfur atoms forming an almost regular tetrahedron, with Fe-SG distances ranging from 2.27 A to 2.31 A and angles varying from 103 degrees to 115 degrees. The intramolecular hydrogen-bonding pattern is quite comparable to those found in other proteins refined at high resolution. All the polar groups are involved in hydrogen bonds: intramolecular, intermolecular or with solvent molecules. The main structural differences from the other rubredoxins are in the nature and the distribution of some of the charged residues over the molecular surface. The possible influence of several structural factors on the intramolecular and intermolecular electron transfer properties such as the NH...SG bonds, the solvent exposure of the redox center, and the aromatic core is discussed. The conservation, during evolution, of a ring of acidic residues in the proximity of the FeSG4 center suggests that this ring may be implicated in the recognition processes between rubredoxins and their functional partners.     

Structure of rubredoxin from Desulfovibrio vulgaris at 1.5 A resolution

The X-ray model of rubredoxin from Desulfovibrio vulgaris has been refined against 1.5 A X-ray diffraction data collected on a diffractometer. The final model comprises 395 non-hydrogen protein atoms, and 180 solvent O atoms. The final R-value for the model with calculated H atom positions included as fixed contributions is 0.098 over all reflections greater than 2 sigma I from infinity to 1.5 A. The error in co-ordinates is estimated to be 0.08 A. The solvent model was twice redetermined during the later stages of refinement and was instrumental in its success. One sequence error has been detected and corrected (Thr21----Asp). The iron-sulfur site bond angles are distorted from true tetrahedral symmetry, as found in other rubredoxin structures. A significant deviation from tetrahedral angles is seen at C alpha atoms 9, 10, 42 and 43, interior angles of the loops binding the iron atom. The planes of two aromatic groups, Tyr4 and Trp37, are nearly parallel to, and lie under, an extended system of atoms that includes the peptide bonds preceding the first cysteine residue of each cysteine loop as well as the cysteine side-chain, the iron, and the cysteine side-chain of the opposite loop, forming a previously unrecognized extended system that may function in electron transfer.     

Crystal structure of rubredoxin from Desulfovibrio gigas to ultra-high 0.68 A resolution

Rubredoxin (D.g. Rd) is a small non-heme iron-sulfur protein shown to function as a redox coupling protein from the sulfate reducing bacteria Desulfovibrio gigas. The protein is generally purified from anaerobic bacteria in which it is thought to be involved in electron transfer or exchange processes. Rd transfers an electron to oxygen to form water as part of a unique electron transfer chain, composed by NADH:rubredoxin oxidoreductase (NRO), rubredoxin and rubredoxin:oxygen oxidoreductase (ROO) in D.g. The crystal structure of D.g. Rd has been determined by means of both a Fe single-wavelength anomalous dispersion (SAD) signal and the direct method, and refined to an ultra-high 0.68 A resolution, using X-ray from a synchrotron. Rd contains one iron atom bound in a tetrahedral coordination by the sulfur atoms of four cysteinyl residues. Hydrophobic and pi-pi interactions maintain the internal Rd folding. Multiple conformations of the iron-sulfur cluster and amino acid residues are observed and indicate its unique mechanism of electron transfer. Several hydrogen bonds, including N-H...SG of the iron-sulfur, are revealed clearly in maps of electron density. Abundant waters bound to C-O peptides of residues Val8, Cys9, Gly10, Ala38, and Gly43, which may be involved in electron transfer. This ultrahigh-resolution structure allows us to study in great detail the relationship between structure and function of rubredoxin, such as salt bridges, hydrogen bonds, water structures, cysteine ligands, iron-sulfur cluster, and distributions of electron density among activity sites. For the first time, this information will provide a clear role for this protein in a strict anaerobic bacterium.     

Three-dimensional structure of catalase from Micrococcus lysodeikticus at 1.5 A resolution.

The three-dimensional crystal structure of catalase from Micrococcus lysodeikticus has been solved by multiple isomorphous replacement and refined at 1.5 A resolution. The subunit of the tetrameric molecule of 222 symmetry consists of a single polypeptide chain of about 500 amino acid residues and one haem group. The crystals belong to space group P4(2)2(1)2 with unit cell parameters a = b = 106.7 A, c = 106.3 A, and there is one subunit of the tetramer per asymmetric unit. The amino acid sequence has been tentatively determined by computer graphics model building and comparison with the known three-dimensional structure of beef liver catalase and sequences of several other catalases. The atomic model has been refined by Hendrickson and Konnert's least-squares minimisation against 94,315 reflections between 8 A and 1.5 A. The final model consists of 3,977 non-hydrogen atoms of the protein and haem group, 426 water molecules and one sulphate ion. The secondary and tertiary structures of the bacterial catalase have been analyzed and a comparison with the structure of beef liver catalase has been made.     

Glycera dibranchiata hemoglobin. Structure and refinement at 1.5 A resolution

The coelomic cells of the common marine bloodworm Glycera dibranchiata contain several hemoglobin monomers and polydisperse polymers. We present the refined structure of one of the Glycera monomers at 1.5 A resolution. The molecular model for protein and ordered solvent for the deoxy form of the Glycera monomer has been refined to a crystallographic R-factor of 12.7% against an X-ray diffraction dataset at 1.5 A resolution. The positions of 1095 protein atoms have been determined with a maximum root-mean-square (r.m.s.) error of 0.13 A, and the r.m.s. deviation from ideal bond lengths is 0.015 A and from ideal bond angles is 1.0 degree. The r.m.s. deviation of planar groups from their least-squares planes is 0.007 A, and the r.m.s. deviation for torsion angles is 1.2 degrees for peptide groups and 16.8 degrees for side-chains. A total of 153 water molecules has been located, and they have been refined to a final average occupancy of 0.80. Multiple conformations have been found for five side-chains, and a change has been suggested for the sequence at five residues. The heme group is present in the "reverse" orientation that differs only in the positions of the vinyl beta-carbons from the "normal" orientation. The doming of the heme towards the proximal side, and the bond distances and angles of the heme and proximal histidine are typical of most deoxy globin structures. The substitution of leucine for the distal histidine residue (E7) creates an unusually hydrophobic heme pocket.     

Crystallisation and preliminary analysis of glucose isomerase from Streptomyces albus

The glucose isomerase of Streptomyces albus has been crystallised from a dilute solution of magnesium chloride buffered at a pH of 6.8-7.0. The crystals are in the space group I222 with cell dimensions a = 93.9 A, b = 99.5 A and c = 102.9 A. There is one monomer of the tetrameric molecule per asymmetric unit of the crystal and the packing density is 2.93 A3.Da-1. The tetramer sits on the 222 symmetry point of the crystal. Native data have been recorded to a resolution of 1.9 A and the crystals diffract to about 1.5 A. The alpha-carbon coordinates of the Arthrobacter glucose isomerase and the backbone coordinates of the S. olivochromogenes enzyme determined by other groups have been oriented in the present cell. The structure is currently being refined. The binding of several metal ions to the two metal sites has been analysed.     

Solution structure of reduced Clostridium pasteurianum rubredoxin

The solution structure of reduced Clostridium pasteurianum rubredoxin (MW 6100) is reported here. The protein is highly paramagnetic, with iron(II) being in the S=2 spin state. The Hβ protons of the ligating cysteines are barely observed, and not specifically assigned. Seventy-six percent of the protons have been assigned and 1267 NOESY peaks (of which 1037 are meaningful) have been observed. Nonselective T ₁ measurements have been measured by recording four nonselective 180°-τ-NOESY at different τ values, and fitting the intensity recoveries to an exponential recovery. Thirty-six metal-proton upper and lower distance constraints have been obtained from the above measurements. The use of such constraints is assessed with respect to spin delocalization on the sulfur donor atoms. The solution structure obtained with the program DYANA has been refined through restrained energy minimization. A final family of 20 conformers is obtained with no distance violations larger than 0.24?Å, and RMSD values to the mean structure of 0.58 and 1.03?Å for backbone and all heavy atoms, respectively (measured on residues 3–53). The structure is compared to the X-ray structure of the oxidized and of the zinc substituted protein, and to the available structures of other rubredoxins. In particular, the comparison with the crystal structure and the solution structure of the Zn derivative of the highly thermostable Pyrococcus furiosus rubredoxin suggested that the relatively low thermal stability of the clostridial rubredoxin may be tentatively ascribed to the loosening of its secondary structure elements. This research is a further achievement at the frontier of solution structure determinations of paramagnetic proteins.     

Sequence of rubredoxin by x-ray diffraction

A tentative amino acid sequence has been determined for rubredoxin from Clostridium pasteurianum by examining the shapes of the side chains in an electron density map at 2 Å resolution. Superpositions of the appropiate portions of this map and “ball and stick” representations of the amino acids assigned are presented as evidence in support of our identifications. Discrepancies exist between the sequence shown here and that determined by chemical methods. The sequence deduced from the 2Å resolution map, however, represents our best estimate in the absence of chemical data and before refinement of the structure. We emphasize the results at 2 Å resolution because, until recently, the 2 Å resolution map was usually the final result of an X-ray structure determination. It is instructive to show the level of reliability that can be expected at that stage and to illustrate the kinds of mistakes that are likely to occur when making identifications from electrondensity maps.     

Structure of a serine protease proteinase K from Tritirachium album limber at 0.98 A resolution

X-ray diffraction data at atomic resolution to 0.98 A with 136 380 observed unique reflections were collected using a high quality proteinase K crystals grown under microgravity conditions and cryocooled. The structure has been refined anisotropically with REFMAC and SHELX-97 with R-factors of 11.4 and 12.8%, and R(free)-factors of 12.4 and 13.5%, respectively. The refined model coordinates have an overall rms shifts of 0.23 A relative to the same structure determined at room temperature at 1.5 A resolution. Several regions of the main chain and the side chains, which were not observed earlier have been seen more clearly. For example, amino acid 207, which was reported earlier as Ser has been clearly identified as Asp. Furthermore, side-chain disorders of 8 of 279 residues in the polypeptide have been identified. Hydrogen atoms appear as significant peaks in the F(o) - F(c) difference electron density map accounting for an estimated 46% of all hydrogen atoms at 2sigma level. Furthermore, the carbon, nitrogen, and oxygen atoms can be differentiated clearly in the electron density maps. Hydrogen bonds are clearly identified in the serine protease catalytic triad (Ser-His-Asp). Furthermore, electron density is observed for an unusual, short hydrogen bond between aspartic acid and histidine in the catalytic triad. The short hydrogen bond, designated "catalytic hydrogen bond", occurs as part of an elaborate hydrogen bond network, involving Asp of the catalytic triad. Though unusual, these features seem to be conserved in other serine proteases. Finally there are clear electron density peaks for the hydrogen atoms associated with the Ogamma of Ser 224 and Ndelta1 of His 69.     

Solution structure of a zinc substituted eukaryotic rubredoxin from the cryptomonad alga Guillardia theta

The rubredoxin from the cryptomonad Guillardia theta is one of the first examples of a rubredoxin encoded in a eukaryotic organism. The structure of a soluble zinc-substituted 70-residue G. theta rubredoxin lacking the membrane anchor and the thylakoid targeting sequence was determined by multidimensional heteronuclear NMR, representing the first three-dimensional (3D) structure of a eukaryotic rubredoxin. For the structure calculation a strategy was applied in which information about hydrogen bonds was directly inferred from a long-range HNCO experiment, and the dynamics of the protein was deduced from heteronuclear nuclear Overhauser effect data and exchange rates of the amide protons. The structure is well defined, exhibiting average root-mean-square deviations of 0.21 A for the backbone heavy atoms and 0.67 A for all heavy atoms of residues 7-56, and an increased flexibility toward the termini. The structure of this core fold is almost identical to that of prokaryotic rubredoxins. There are, however, significant differences with respect to the charge distribution at the protein surface, suggesting that G. theta rubredoxin exerts a different physiological function compared to the structurally characterized prokaryotic rubredoxins. The amino-terminal residues containing the putative signal peptidase recognition/cleavage site show an increased flexibility compared to the core fold, but still adopt a defined 3D orientation, which is mainly stabilized by nonlocal interactions to residues of the carboxy-terminal region. This orientation might reflect the structural elements and charge pattern necessary for correct signal peptidase recognition of the G. theta rubredoxin precursor.     

The atomic resolution crystal structure of atratoxin determined by single wavelength anomalous diffraction phasing

By using single wavelength anomalous diffraction phasing based on the anomalous signal from copper atoms, the crystal structure of atratoxin was determined at the resolution of 1.5 A and was refined to an ultrahigh resolution of 0.87 A. The ultrahigh resolution electron density maps allowed the modeling of 38 amino acid residues in alternate conformations and the location of 322 of 870 possible hydrogen atoms. To get accurate information at the atomic level, atratoxin-b (an analog of atratoxin with reduced toxicity) was also refined to an atomic resolution of 0.92 A. By the sequence and structural comparison of these two atratoxins, Arg(33) and Arg(36) were identified to be critical to their varied toxicity. The effect of copper ions on the distribution of hydrogen atoms in atratoxin was discussed, and the interactions between copper ions and protein residues were analyzed based on a statistical method, revealing a novel pentahedral copper-binding motif.     

Production of a recombinant alkane hydroxylase (AlkB2) from <Emphasis Type="Italic">Alcanivorax</Emphasis><Emphasis Type="Italic">borkumensis</Emphasis>

Alcanivorax borkumensis is an oil-degrading marine bacterium. Its genome contains genes coding for three cytochrome P450s and two integral membrane alkane hydroxylases (AlkB1 & AlkB2), all assumed to perform hydroxylation of different linear or branched alkanes. Although, the sequence of alkB2 has been determined, the molecular characterization and the substrate specificity of AlkB2 require more precise investigation. In this study, AlkB2 from A. borkumensis SK2 was expressed in Escherichia coli to examine the functionality of AlkB2 as a hydroxylating enzyme. Furthermore, the activity of the enzyme in the presence of the accessory proteins, rubredoxin (RubA) and rubredoxin reductase (RubB), produced in E. coli BL21(DE3)plysS cells, was determined. Recombinant AlkB2 is produced in an active form and rubredoxin is the intermediate electron donor to AlkB2 and can replace AlkG function, when NADH is the prime electron donor.     

高分辨率高精度蛋白质晶体结构

自从六十年代初期应用X射线晶体衍射方法测定第一个蛋白质(肌红蛋白)的三维结构以来,我们关于蛋白质三维结构的知识已有了相当的积累.截止86年7月的统计,已有286个蛋白质分子的原子坐标存入国际蛋白质数据库.以此为基础,一些重要生命活动的结构机理已经在三维水平上得到精细阐明(参见),一个由分子生物学和X射线晶体学结合形成的新领域——蛋白质晶体学,应运而生.二十多年来,这一领域的发展已经历了二个阶段.第一阶段大体从六十年代初到七十年代中期,在这期间,分析方法和技术从突破发展到成熟和实用,并有近40个蛋白质结构测定出来,使我们获得了蛋白质结构知识的面面观.     

Isolation and characterization of a rubredoxin and an (8Fe-8S) ferredoxin from Desulfuromonas acetoxidans

A two cluster (4Fe-4S) ferredoxin and a rubredoxin have been isolated from the sulfur-reducing bacterium Desulfuromonas acetoxidans. Their amino acid compositions are reported and compared to those of other iron-sulfur proteins. The ferredoxin contains 8 cysteine residues, 8 atoms of iron and 8 atoms of labile sulfur per molecule; its minimum molecular weight is 6163. The protein exhibits an abosrbance ratio of A385/A283 = 0.74. Storage results in a bleaching of the chromophore; the denatured ferredoxin is reconstitutable with iron and sulfide. The instability temperature is 52 degrees C. The rubredoxin does not differ markedly from rubredoxins from other anaerobic bacteria.     

Three-dimensional structure of the high-potential iron-sulfur protein isolated from the purple phototrophic bacterium Rhodocyclus tenuis determined and refined at 1.5 A resolution.

The molecular structure of the high-potential iron-sulfur protein (HiPIP) isolated from the phototrophic bacterium, Rhodocyclus tenuis, has been solved and refined to a nominal resolution of 1.5 A with a crystallographic R-factor of 17.3% for all measured X-ray data from 30 A to 1.5 A. It is the smallest of the HiPIP structures studied thus far with 62 amino acid residues. Crystals used in the investigation belonged to the space group P2(1) with unit cell dimensions of a = 36.7 A, b = 52.6 A, c = 27.6 A and beta = 90.8 degrees and contained two molecules per asymmetric unit. The structure was solved by a combination of multiple isomorphous replacement with two heavy-atom derivatives, anomalous scattering from the iron-sulfur cluster, symmetry averaging and solvent flattening. The folding motif for this HiPIP is characterized by one small alpha-helix, six Type I turns, an approximate Type II turn and one Type I' turn. As in other HiPIPs, the iron-sulfur cluster is co-ordinated by four cysteinyl ligands and exhibits a cubane-like motif. These cysteinyl ligands are all located in Type I turns. The hydrogen bonding around the metal cluster in the R. tenuis protein is similar to the patterns observed in the Chromatium vinosum and Ectothiorhodospira halophila HiPIPs. Several of the amino acid residues invariant in the previously determined C. vinosum and E. halophila structures are not retained in the R. tenuis molecule. There are 13 solvent molecules structurally conserved between the two R. tenuis HiPIP molecules in the asymmetric unit, some of which are important for stabilizing surface loops. Interestingly, while it is assumed that this HiPIP functions as a monomer in solution, the two molecules in the asymmetric unit pack as a dimer and are related to each other by an approximate twofold rotation axis.     

Structure of a legume lectin from the bark of Robinia pseudoacacia and its complex with N-acetylgalactosamine

The structure of the bark lectin RPbAI (isoform A4) from Robinia pseudoacacia has been determined by protein crystallography both in the free form and complexed with N-acetylgalactosamine. The free form is refined at 1.80 A resolution to an R-factor of 18.9% whereas the complexed structure has an R-factor of 19.7% at 2.05 A resolution. Both structures are compared to each other and to other available legume lectin structures. The polypeptide chains of the two structures exhibit the characteristic legume lectin tertiary fold. The quaternary structure resembles that of the Phaseolus vulgaris lectin, the soybean agglutinin, and the Dolichos biflorus lectin, but displays some unique features leading to the extreme stability of this lectin.     

Structure and function of chromophores in R-Phycoerythrin at 1.9 A resolution

The crystal structure of R-Phycoerythrin (R-PE) from Polysiphonia urceolata has been refined to a resolution of 1.9 A, based on the atomic coordinates of R-PE determined at 2.8 A resolution, through the use of difference Fourier method and steorochemistry parameters restrained refinement with model adjustment according to the electron density map. Crystallographic R-factor of the refined model is 0.195 (Rfree = 0.282) from 8-1.9 A. High resolution structure of R-PE showed precise interactions between the chromophores and protein residues, which explained the spectrum characteristic and function of chromophores. Four chiral atoms of phycourobilin (PUB) were identified as C(4)-S, C(16)-S, C(21)-S, and C(20)-R. In addition to the coupling distances of 19 A to 45 A between the chromophores which were observed and involved in the energy transfer pathway, high resolution structure of R-PE suggested other pathways of energy transfer, such as the ultrashort distance between alpha140a and beta155. It has been proposed that aromatic residues in linker proteins not only influence the conformation of chromophore, but may also bridge chromophores to improve the energy transfer efficiency.     

The Refined Three-Dimensional Structure of Pectate Lyase E from Erwinia chrysanthemi at 2.2 A Resolution

The crystal structure of pectate lyase E (PelE; EC 4.2.2.2) from the enterobacteria Erwinia chrysanthemi has been refined by molecular dynamics techniques to a resolution of 2.2 A and an R factor (an agreement factor between observed structure factor amplitudes) of 16.1%. The final model consists of all 355 amino acids and 157 water molecules. The root-mean-square deviation from ideality is 0.009 A for bond lengths and 1.721[deg] for bond angles. The structure of PelE bound to a lanthanum ion, which inhibits the enzymatic activity, has also been refined and compared to the metal-free protein. In addition, the structures of pectate lyase C (PelC) in the presence and absence of a lutetium ion have been refined further using an improved algorithm for identifying waters and other solvent molecules. The two putative active site regions of PelE have been compared to those in the refined structure of PelC. The analysis of the atomic details of PelE and PelC in the presence and absence of lanthanide ions provides insight into the enzymatic mechanism of pectate lyases.