Isolation of the URA5 gene from Cryptococcus neoformans var. neoformans and its use as a selective marker for transformation.

A cDNA encoding Cryptococcus neoformans orotidine monophosphate pyrophosphorylase (OMPPase) has been isolated by complementation of the cognate Escherichia coli pyrE mutant. The cDNA was used as a probe to isolate a genomic DNA fragment encoding the OMPPase gene (URA5). By using electroporation for the introduction of plasmid DNA containing the URA5 gene, C. neoformans ura5 mutants could be transformed at low efficiency. Ura+ transformants obtained with supercoiled plasmids containing the URA5 gene showed marked mitotic instability and contained extrachromosomal URA5 sequences, suggesting limited ability to replicate within C. neoformans. Transformants obtained with linear DNA were of two classes: stable transformants with integrated URA5 sequences, and unstable transformants with extrachromosomal URA5 sequences.     

Nonintegrative transformation in the filamentous fungus Podospora anserina: stabilization of a linear vector by the chromosomal ends of Tetrahymena thermophila.

The effect of the chromosomal ends of Tetrahymena thermophila on the stability of linear transforming molecules in the filamentous fungus Podospora anserina was tested. A derivative of an integrative vector for this fungus has been constructed, so that after linearization, the ends of the plasmid are the telomeric sequences of T. thermophila. After transformation, this linear molecule was maintained as an extrachromosomal plasmid with no integrated copies in about 50% of the transformants. Under selective conditions, there was approximately one linear molecule per 5 to 10 nuclei, and these extrachromosomal molecules were rapidly lost under nonselective conditions. The circular plasmid carrying an inverted repeat of T. thermophila telomeres could be linearized and processed in vivo.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus.

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Identification of autonomously replicating circular subtelomeric Y'' elements in Saccharomyces cerevisiae.

We marked a large number of yeast telomeres within their Y' regions by transforming strains with a fragment of Y' DNA into which the URA3 gene had been inserted. A few of the Ura+ transformants obtained were very unstable and were found to contain autonomously replicating URA3-marked circular Y' elements in high copy number. These marked extrachromosomal circles were capable of reintegrating into the chromosome at other telomeric locations. In contrast, most of the Ura+ transformants obtained were quite stable mitotically and were marked at bona fide chromosomal ends. These stable transformants gave rise to mitotically unstable URA3-marked circular Y' elements at a low frequency (up to 2.5%). The likelihood that such excisions and integrations represent a natural process in Saccharomyces cerevisiae is supported by our identification of putative Y' circles in untransformed strains. The transfer of Y' information among telomeres via a circular intermediate may be important for homogenizing the sequences at the ends of yeast chromosomes and for generating the frequent telomeric rearrangements that have been observed in S. cerevisiae.     

High-efficiency transformation of Pichia stipitis based on its URA3 gene and a homologous autonomous replication sequence, ARS2.

This paper describes the first high-efficiency transformation system for the xylose-fermenting yeast Pichia stipitis. The system includes integrating and autonomously replicating plasmids based on the gene for orotidine-5'-phosphate decarboxylase (URA3) and an autonomous replicating sequence (ARS) element (ARS2) isolated from P. stipitis CBS 6054. Ura- auxotrophs were obtained by selecting for resistance to 5-fluoroorotic acid and were identified as ura3 mutants by transformation with P. stipitis URA3. P. stipitis URA3 was cloned by its homology to Saccharomyces cerevisiae URA3, with which it is 69% identical in the coding region. P. stipitis ARS elements were cloned functionally through plasmid rescue. These sequences confer autonomous replication when cloned into vectors bearing the P. stipitis URA3 gene. P. stipitis ARS2 has features similar to those of the consensus ARS of S. cerevisiae and other ARS elements. Circular plasmids bearing the P. stipitis URA3 gene with various amounts of flanking sequences produced 600 to 8,600 Ura+ transformants per micrograms of DNA by electroporation. Most transformants obtained with circular vectors arose without integration of vector sequences. One vector yielded 5,200 to 12,500 Ura+ transformants per micrograms of DNA after it was linearized at various restriction enzyme sites within the P. stipitis URA3 insert. Transformants arising from linearized vectors produced stable integrants, and integration events were site specific for the genomic ura3 in 20% of the transformants examined. Plasmids bearing the P. stipitis URA3 gene and ARS2 element produced more than 30,000 transformants per micrograms of plasmid DNA. Autonomously replicating plasmids were stable for at least 50 generations in selection medium and were present at an average of 10 copies per nucleus.     

Improved method for electroporation of Staphylococcus aureus

We have developed a significantly improved method for the electroporation of plasmid DNA into Staphylococcus aureus. The highest transformation efficiency achieved with this procedure was 4.0 x 10(8) transformants per microgram of plasmid pSK265 DNA. This represents a 530-fold improvement over the previously reported optimum efficiency of 7.5 x 10(5) transformants per microgram of plasmid DNA after electroporation of S. aureus cells [9]. Identical results were obtained when electrocompetent cells, which had been stored frozen at -80 degrees C, were used. The improved efficiency is due primarily to the use of a modified medium (designated as B2 medium) and secondarily to the use of 0.1-cm cuvettes. Several other plasmids (pI258, pMH109, and pSK270) were also electrotransformed into competent cells using our procedure, and for each plasmid, the transformation efficiency was significantly reduced compared to that observed when pSK265 DNA was used. With respect to plasmid pI258, the transformation efficiency was 3500-fold higher than that reported previously for transformation of this plasmid into S. aureus RN4220 [9]. The optimized electroporation procedure was less successful in transforming other staphylococci. Electrocompetent cells of S. aureus ATCC 29213 and S. epidermidis ATCC 12228 produced 5.5 x 10(5) and 5 x 10(3) transformants per microgram of pSK265 DNA, respectively.     

Characterization of the glyceraldehyde-3-phosphate dehydrogenase gene [correction of glyceraldehyde-3-phosphate gene] and the use of its promoter for heterologous expression in Cryptococcus neoformans, a human pathogen.

The GPD gene encoding glyceraldehyde-3-phosphate dehydrogenase was isolated from Cryptococcus neoformans, a heterobasidiomycetous yeast that is pathogenic to humans. The gene contains 11 introns, differing from the conserved intron positions found in the GPD genes of Basidiomycetes. The predicted amino-acid sequence of this gene is extremely similar to that reported from GPD proteins of other basidiomycetes. The promoter region of the C. neoformans GPD gene was similar to those of other basidiomycetes. Plasmid constructs containing up to 1600 base pairs upstream of the native GPD open reading frame were used to express either the native URA5 gene in a ura5 mutant or the heterologous hphI gene (a bacterial gene that confers resistance to the aminoglycoside hygromycin) in a wild-type strain of C. neoformans. Transformation frequencies resulting from the plasmid-borne Gpdp::URA5 gene were at levels similar to those of the native URA5, which suggested that all the sequences necessary for proper expression were present. Transformation frequencies using the Gpdp::hphI gene constructs were poor. However, addition of DNA sequences flanking the 3'-end of an native C. neoformans gene significantly improved the transformation frequencies resulting from the expression of the heterologous hphI gene.     

Factors affecting the transformation of Escherichia coli strain chi1776 by pBR322 plasmid DNA.

The susceptibility of E. coli strain chi1776 to transformation by pBR322 plasmid DNA was examined and optimized. Maximum transformation to tetracycline (Tc) resistance was achieved when cells were harvested from L broth at 5.0--6.0 . 10(7) cfu/ml, followed by washing twice in cold 0.1 M NaCl + 5 mM MgCl2 + 5 mM Tris, pH 7.6. Cells grown in the presence of D-cycloserine (Cyc) rather than nalidixic acid (Nx) transformed markedly better. The presence of 5 mM Mg2+ ions in washing and CaCl2 solutions stimulated transformation about 2-fold. Optimal conditions for transformation included a pH range of 7.25-7.75 and a cell-to-DNA ratio of about 1.6 . 10(8) cfu/ng plasmid DNA. The frequency of transformation was highest when cells were exposed to 100 mM CaCl2 in 250 mM KCl + 5 mM MgCl2 + 5 mM Tris, pH 7.6, before mixing with DNA. A 60 min incubation period for cell + DNA mixtures held on ice produced the maximum number of Tcr transformants. In our hands, heat shocks at 37 degrees C or 42 degrees C for various times all decreased transformation to about one-half of optimal levels. Furthermore, the recovery of transformants was best when cell + DNA mixtures were plated on precooled (4 degrees C) Tc agar plates. The efficiency of plating was optimum when only 5 microliter of cell + DNA mixture was spread per plate, suggesting that non-viable background chi1776 cells on selective medium inhibited the recovery of transformants. It was also found that the presence of linear DNA molecules in cell + DNA mixtures markedly inhibited the transformation of chi1776 by pBR322 plasmid DNA. On the basis of these findings, a new procedure for the plasmid-specific transformation of E. coli chi1776 by pBR322 plasmid DNA is proposed. The use of this technique has allowed us to attain transformation frequencies in excess of 10(7) transformants/microgram pBR322 plasmid DNA.     

High-frequency transformation of Brevibacterium lactofermentum protoplasts by plasmid DNA.

An efficient polyethylene glycol-assisted method for transformation of Brevibacterium lactofermentum protoplasts that uses plasmid vectors has been developed. Two small plasmids, pUL330 (5.2 kilobases) and pUL340 (5.8 kilobases), both containing the kanamycin resistance gene from transposon Tn5 and the replication origin of the natural plasmid pBL1 of B. lactofermentum, were selected as vectors. Supercoiled forms of the plasmids yielded a 100-fold higher transformation frequency than did linear forms. The optimal transformation frequency was achieved with 10 ng of DNA in 1 ml of transformation buffer. Higher concentrations of plasmid DNA resulted in a decrease in transformation frequency per microgram of DNA. Optimal transformation was obtained with 25 to 35% polyethylene glycol 6000. Under optimal conditions, 10(6) transformants per microgram of DNA were obtained.     

Gene transfer in Cryptococcus neoformans by use of biolistic delivery of DNA.

A transformation scheme for Cryptococcus neoformans to yield high-frequency, integrative events was developed. Adenine auxotrophs from a clinical isolate of C. neoformans serotype A were complemented by the cryptococcal phosphoribosylaminoimidazole carboxylase gene (ade2) with a biolistic DNA delivery system. Comparison of two DNA delivery systems (electroporation versus a biolistic system) showed notable differences. The biolistic system did not require linear vectors and transformed each auxotrophic strain at similar frequencies. Examination of randomly selected transformants by biolistics showed that 15 to 40% were stable, depending on the recipient auxotroph, with integrative events identified in all stable transformants by DNA analysis. Although the ade2 cDNA copy transformed at a low frequency, DNA analysis found homologous recombination in each of these transformants. DNA analysis of stable transformants receiving genomic ade2 revealed ectopic integration in a majority of cases, but approximately a quarter of the transformants showed homologous recombination with vector integration or gene replacement. This system has the potential for targeted gene disruption, and its efficiency will also allow for screening of DNA libraries within C. neoformans. Further molecular strategies to study the pathobiology of this pathogenic yeast are now possible with this transformation system.     

Transformation of the phytopathogenic bacterium Clavibacter michiganense subsp. michiganense by electroporation and development of a cloning vector.

We constructed a cloning vector for use in the plant pathogenic bacterium Clavibacter michiganense subsp. michiganense. The vector pDM100 consists of a 3.2-kb restriction fragment of the Clavibacter plasmid pCM1 joined to a pBR325 derivative carrying the neomycin phosphotransferase of transposon Tn5 and the gentamicin acetyltransferase of Tn1696. Both antibiotic resistance genes are efficiently expressed in C. michiganense subsp. michiganense. Although polyethylene glycol-mediated transfection of spheroplasts with the DNA of the C. michiganense subsp. michiganense-specific bacteriophage CMP1 yielded about 3 x 10(3) transfectants per microgram of DNA, in transformations with plasmid DNA only a very few transformants were obtained. However, the transformation efficiency could be improved by electroporation of intact cells, giving about 2 x 10(3) transformants per microgram of plasmid DNA. Since a transformation procedure and a cloning vector are now available, pathogenicity in C. michiganense subsp. michiganense can now be analyzed genetically.     

Efficient gene transfer in C.elegans: extrachromosomal maintenance and integration of transforming sequences.

We describe a dominant behavioral marker, rol-6(su-1006), and an efficient microinjection procedure which facilitate the recovery of Caenorhabditis elegans transformants. We use these tools to study the mechanism of C.elegans DNA transformation. By injecting mixtures of genetically marked DNA molecules, we show that large extrachromosomal arrays assemble directly from the injected molecules and that homologous recombination drives array assembly. Appropriately placed double-strand breaks stimulated homologous recombination during array formation. Our data indicate that the size of the assembled transgenic structures determines whether or not they will be maintained extrachromosomally or lost. We show that low copy number extrachromosomal transformation can be achieved by adjusting the relative concentration of DNA molecules in the injection mixture. Integration of the injected DNA, though relatively rare, was reproducibly achieved when single-stranded oligonucleotide was co-injected with the double-stranded DNA.     

Protoplast transformation of Bacillus stearothermophilus NUB36 by plasmid DNA

An efficient protoplast transformation system was established for Bacillus stearothermophilus NUB3621 using thermophilic plasmid pTHT15 Tcr (4.5 kb) and mesophilic plasmid pLW05 Cmr (3 kb), a spontaneous deletion derivative of pPL401 Cmr Kmr. The efficiency of transformation of NUB3621 with pLW05 and pTHT15 was 2 x 10(7) to 4 x 10(8) transformants per micrograms DNA. The transformation frequency (transformants per regenerant) was 0.5 to 1.0. Chloramphenicol-resistant and tetracycline-resistant transformants were obtained when competent cells of Bacillus subtilis were transformed with pLW05 [2.5 x 10(5) transformants (microgram DNA)-1] and pTHT15 [1.8 x 10(5) transformants (micrograms DNA)-1], respectively. Thus, these plasmids are shuttle vectors for mesophilic and thermophilic bacilli. Plasmid pLW05 Cmr was not stably maintained in cultures growing at temperatures between 50 and 65 degrees C but the thermostable chloramphenicol acetyltransferase was active in vivo at temperatures up to 70 degrees C. In contrast, thermophilic plasmid pTHT15 Tcr was stable in cultures growing at temperatures up to 60 degrees C but the tetracycline resistance protein was relatively thermolabile at higher temperatures. The estimated copy number of pLW05 in cells of NUB3621 growing at 50, 60, and 65 degrees C was 69, 18, and 1 per chromosome equivalent, respectively. The estimated copy number of pTHT15 in cells of NUB3621 growing at 50 or 60 degrees C was about 41 to 45 per chromosome equivalent and 12 in cells growing at 65 degrees C.     

Isolation of telomeric DNA from the filamentous fungus Podospora anserina and construction of a self-replicating linear plasmid showing high transformation frequency.

It has been previously shown that linear plasmids bearing Tetrahymena telomeric sequences are able to replicate autonomously in the filamentous fungus Podospora anserina (1). However, autonomous replication occurs in only 50-70% of the transformants, suggesting a defect in the recognition of the Tetrahymena telomeric template by the putative P. anserina telomerase so that only a fraction of entering DNA is stabilized into linear extrachromosomal molecules. We have cloned DNA sequences added to the Tetrahymena (T2G4)n ends of the linear plasmid. Nucleotide sequencing showed that these sequences are exclusively composed of T2AG3 repeat units. Hybridization experiments of Bal31 treated DNA showed that T2AG3 repeats are confined within 200 bp in chromosomal P. anserina telomeres. A new plasmid has been constructed so that after linearization, the terminal sequences contain T2AG3 repeats. This linear molecule transforms P. anserina with a high frequency (up to 1.75 x 10(4) transformants/micrograms), autonomous replication occurs in 100% of the transformants and the plasmid copy number is about 2-3 per nucleus. These results underscore the importance of the telomeric repeat nucleotide sequence for efficient recognition as functional telomeric DNA in vivo and provide the first step toward the development of an artificial chromosome cloning system for filamentous fungi.     

Development of an integrative DNA transformation system for the yeast Candida tropicalis.

We developed the alkane and fatty-acid utilizing yeast Candida tropicalis as a host for DNA transformations. The system is based on an auxotrophic mutant host of C. tropicalis which is defective in orotidine monophosphate decarboxylase (ura3). The ura3 host was isolated by mutagenesis and a double-selection procedure that combined nystatin enrichment selection and 5-fluoro-orotic acid resistance selection. As a selectable marker, we isolated and characterized the C. tropicalis URA3 gene. Plasmid vectors that contained the C. tropicalis URA3 gene transformed the C. tropicalis mutant host at a frequency of 10(3) to 10(4) transformants per micrograms of plasmid DNA. Vectors that contained the Saccharomyces cerevisiae URA3 gene could not transform C. tropicalis. DNA transfer was accomplished by modified versions of either spheroplast generation (CaCl2-polyethylene glycol)-fusion or cation (LiCl) procedures developed for S. cerevisiae. Plasmid vectors that had been cut within the C. tropicalis URA3 fragment integrated by homologous recombination at the URA3 locus.     

Factors involved in the electroporation-induced transformation of Clostridium perfringens

The following factors were found to improve the efficiency of transformation of Clostridium perfringens 3624A Rifr Strr: (1) a reduction in cuvette sample volume (DNA and cell suspension) to 0.8 ml, (2) use of a 1 microgram/ml concentration of transforming DNA, (3) use of late-logarithmic phase cells, (4) 3-fold concentration of cell density (3.0 x 10(8) CFU/ml), and (5) a reduction in the pH of the expression and selective plating medium to 6.4. Application of the improved conditions resulted in transformation efficiencies for C. perfringens 3624A Rifr Strr ranging from 7.1 transformants/microgram DNA for plasmic pIP401 to 9.2 x 10(4) transformants per microgram DNA for plasmid pAK201. The greatest transformation efficiency obtained using pAK201 was 9.8 x 10(6) transformants/micrograms DNA for C. perfringens strain 13. Using the improved protocol, pAM beta 1 was transformed at a 42-fold greater level when compared with the values reported earlier [1]. In addition to C. perfringens 3624A Rifr Strr, strains 13, 10543A, 3628C, NTG-4, and 3624A were successfully transformed. Nuclease does not appear to be a factor in the C. perfringens strain-specific electro-transformation protocol.     

Transformation system for an asporogenous methylotrophic yeast, Candida boidinii: cloning of the orotidine-5''-phosphate decarboxylase gene (URA3), isolation of uracil auxotrophic mutants, and use of the mutants for integrative transformation.

An integrative transformation system was established for an asporogenous methylotrophic yeast, Candida boidinii. This system uses a uracil auxotrophic mutant of C. boidinii as the host strain in combination with its URA3 gene as the selectable marker. First, the C. boidinii URA3 gene coding for orotidine-5'-phosphate decarboxylase (ODCase) was cloned by using complementation of the pyrF mutation of Escherichia coli. Next, the host ODCase-negative mutant strains (ura3 strains) were isolated by mutagenesis and selection for 5-fluro-orotic acid (5-FOA) resistance. Five ura3 host strains that exhibited both a low reversion rate and good methylotrophic growth were obtained. All of these strains could be transformed to Ura+ phenotype with a C. boidinii URA3-harboring plasmid linearized within the Candida DNA. The transformants had a stable Ura+ phenotype after nonselective growth for 10 generations. These results and extensive Southern analysis indicated that the linearized plasmid was integrated into the host chromosomal DNA by homologous recombination at the URA3 locus in C. boidinii.     

Directed mutagenesis in Candida albicans: one-step gene disruption to isolate ura3 mutants.

A method for introducing specific mutations into the diploid Candida albicans by one-step gene disruption and subsequent UV-induced recombination was developed. The cloned C. albicans URA3 gene was disrupted with the C. albicans ADE2 gene, and the linearized DNA was used for transformation of two ade2 mutants, SGY-129 and A81-Pu. Both an insertional inactivation of the URA3 gene and a disruption which results in a 4.0-kilobase deletion were made. Southern hybridization analyses demonstrated that the URA3 gene was disrupted on one of the chromosomal homologs in 15 of the 18 transformants analyzed. These analyses also revealed restriction site dimorphism of EcoRI at the URA3 locus which provides a unique marker to distinguish between chromosomal homologs. This enabled us to show that either homolog could be disrupted and that disrupted transformants of SGY-129 contained more than two copies of the URA3 locus. The A81-Pu transformants heterozygous for the ura3 mutations were rendered homozygous and Ura- by UV-induced recombination. The homozygosity of a deletion mutant and an insertion mutant was confirmed by Southern hybridization. Both mutants were transformed to Ura+ with plasmids containing the URA3 gene and in addition, were resistant to 5-fluoro-orotic acid, a characteristic of Saccharomyces cerevisiae ura3 mutants as well as of orotidine-5'-phosphate decarboxylase mutants of other organisms.     

A 10-min method for preparation of highly electrocompetent Pseudomonas aeruginosa cells: application for DNA fragment transfer between chromosomes and plasmid transformation

A rapid microcentrifuge-based method is described for preparation of Pseudomonas aeruginosa electrocompetent cells with up to 10,000-fold increased transformation efficiencies over existing procedures. This increased efficiency now enables the use of transformation for all applications requiring DNA transfer. These include transfer of chromosomal mutations marked with antibiotic resistance genes between P. aeruginosa strains, which solves the riddle of not having an efficient and reliable transduction procedure for this bacterium. Not surprisingly, the method also allows for very efficient transformation with replicative plasmids, with transformation efficiencies ranging from 10(7) to >10(11) transformants per microgram of DNA. Lastly, with efficiencies of up to >10(3) transformants per microgram of DNA the method replaces in most instances conjugation for the transfer of non-replicative plasmids used in gene replacement, site-specific gene integration and transposon mutagenesis experiments.