Comprehensive analysis of the numbers,lengths and amino acid compositions of transmembrane helices in prokaryotic,eukaryotic and viral integral membrane proteins of high-resolution structure

We report a comprehensive analysis of the numbers, lengths and amino acid compositions of transmembrane helices in 235 high-resolution structures of integral membrane proteins. The properties of 1551 transmembrane helices in the structures were compared with those obtained by analysis of the same amino acid sequences using topology prediction tools. Explanations for the 81 (5.2%) missing or additional transmembrane helices in the prediction results were identified. Main reasons for missing transmembrane helices were mis-identification of N-terminal signal peptides, breaks in α-helix conformation or charged residues in the middle of transmembrane helices and transmembrane helices with unusual amino acid composition. The main reason for additional transmembrane helices was mis-identification of amphipathic helices, extramembrane helices or hairpin re-entrant loops. Transmembrane helix length had an overall median of 24 residues and an average of 24.9 ± 7.0 residues and the most common length was 23 residues. The overall content of residues in transmembrane helices as a percentage of the full proteins had a median of 56.8% and an average of 55.7 ± 16.0%. Amino acid composition was analysed for the full proteins, transmembrane helices and extramembrane regions. Individual proteins or types of proteins with transmembrane helices containing extremes in contents of individual amino acids or combinations of amino acids with similar physicochemical properties were identified and linked to structure and/or function. In addition to overall median and average values, all results were analysed for proteins originating from different types of organism (prokaryotic, eukaryotic, viral) and for subgroups of receptors, channels, transporters and others.     

Modeling alpha-helical transmembrane domains: the calculation and use of substitution tables for lipid-facing residues.

Amino acid substitution tables are calculated for residues in membrane proteins where the side chain is accessible to the lipid. The analysis is based upon the knowledge of the three-dimensional structures of two homologous bacterial photosynthetic reaction centers and alignments of their sequences with the sequences of related proteins. The patterns of residue substitutions show that the lipid-accessible residues are less conserved and have distinctly different substitution patterns from the inaccessible residues in water-soluble proteins. The observed substitutions obtained from sequence alignments of transmembrane regions (identified from, e.g., hydrophobicity analysis) can be compared with the patterns derived from the substitution tables to predict the accessibility of residues to the lipid. A Fourier transform method, similar to that used for the calculation of a hydrophobic moment, is used to detect periodicity in the predicted accessibility that is compatible with the presence of an alpha-helix. If the putative transmembrane region is identified as helical, then the buried and exposed faces can be discriminated. The presence of charged residues on the lipid-exposed face can help to identify the regions that are in contact with the polar environment on the borders of the bilayer, and the construction of a meaningful three-dimensional model is then possible. This method is tested on an alignment of bacteriorhodopsin and two related sequences for which there are structural data at near atomic resolution.     

Lipid-protein interactions in biological membranes: a structural perspective

Lipid molecules bound to membrane proteins are resolved in some high-resolution structures of membrane proteins. An analysis of these structures provides a framework within which to analyse the nature of lipid-protein interactions within membranes. Membrane proteins are surrounded by a shell or annulus of lipid molecules, equivalent to the solvent layer surrounding a water-soluble protein. The lipid bilayer extends right up to the membrane protein, with a uniform thickness around the protein. The surface of a membrane protein contains many shallow grooves and protrusions to which the fatty acyl chains of the surrounding lipids conform to provide tight packing into the membrane. An individual lipid molecule will remain in the annular shell around a protein for only a short period of time. Binding to the annular shell shows relatively little structural specificity. As well as the annular lipid, there is evidence for other lipid molecules bound between the transmembrane α-helices of the protein; these lipids are referred to as non-annular lipids. The average thickness of the hydrophobic domain of a membrane protein is about 29 Å, with a few proteins having significantly smaller or greater thicknesses than the average. Hydrophobic mismatch between a membrane protein and the surrounding lipid bilayer generally leads to only small changes in membrane thickness. Possible adaptations in the protein to minimise mismatch include tilting of the helices and rotation of side chains at the ends of the helices. Packing of transmembrane α-helices is dependent on the chain length of the surrounding phospholipids. The function of membrane proteins is dependent on the thickness of the surrounding lipid bilayer, sometimes on the presence of specific, usually anionic, phospholipids, and sometimes on the phase of the phospholipid.     

A structural dissection of amino acid substitutions in helical transmembrane proteins

The evolution of protein folds is under strong constraints from their surrounding environment. Although folding in water‐soluble proteins is driven primarily by hydrophobic forces, the nature of the forces that determine the folding and stability of transmembrane proteins are still not fully understood. Furthermore, the chemically heterogeneous lipid bilayer has a non‐uniform effect on protein structure. In this article, we attempt to get an insight into the nature of this effect by examining the impact of various types of local structure environment on amino acid substitution, based on alignments of high‐resolution structures of polytopic helical transmembrane proteins combined with sequences of close homologs. Compared to globular proteins, burying amino acid sidechains, especially hydrophilic ones, led to a lower increase in conservation in both the lipid‐water interface region and the hydrocarbon core region. This observation is due to surface residues in HTM proteins especially in the HC region being relatively highly conserved, suggesting higher evolutionary constraints from their specific interactions with the surrounding lipid molecules. Polar and small residues, particularly Pro and Gly, show a noticeable increase in conservation as they are positioned more towards the centre of the membrane, which is consistent with their recognized key roles in structural stability. In addition, the examination of hydrogen bonds in the membrane environment identified some exposed hydrophilic residues being better conserved when not hydrogen‐bonded to other residues, supporting the importance of lipid‐protein sidechain interactions. The conclusions presented in this study highlight the distinct features of substitution matrices that take into account the membrane environment, and their potential role in improving sequence‐structure alignments of transmembrane proteins. Proteins 2010; © 2010 Wiley‐Liss, Inc.     

Transmembrane domains of viral ion channel proteins: a molecular dynamics simulation study

Nanosecond molecular dynamics simulations in a fully solvated phospholipid bilayer have been performed on single transmembrane alpha-helices from three putative ion channel proteins encoded by viruses: NB (from influenza B), CM2 (from influenza C), and Vpu (from HIV-1). alpha-Helix stability is maintained within a core region of ca. 28 residues for each protein. Helix perturbations are due either to unfavorable interactions of hydrophobic residues with the lipid headgroups or to the need of the termini of short helices to extend into the surrounding interfacial environment in order to form H-bonds. The requirement of both ends of a helix to form favorable interactions with lipid headgroups and/or water may also lead to tilting and/or kinking of a transmembrane alpha-helix. Residues that are generally viewed as poor helix formers in aqueous solution (e.g., Gly, Ile, Val) do not destabilize helices, if located within a helix that spans a lipid bilayer. However, helix/bilayer mismatch such that a helix ends abruptly within the bilayer core destabilizes the end of the helix, especially in the presence of Gly and Ala residues. Hydrogen bonding of polar side-chains with the peptide backbone and with one another occurs when such residues are present within the bilayer core, thus minimizing the energetic cost of burying such side-chains.     

How protein transmembrane segments sense the lipid environment

Integral membrane proteins have central roles in a vast number of vital cellular processes. A structural feature that most membrane proteins have in common is the presence of one or more alpha-helices with which they traverse the lipid bilayer. Because of the interaction with the surrounding lipids, the organization of these transmembrane helices will be sensitive to lipid properties like lateral packing, hydrophobic thickness, and headgroup charge. The helices may adapt to the lipids in different ways, which in turn can influence the structure and function of the intact membrane protein. In this review, we will focus on how the lipid environment influences two specific properties of transmembrane segments: their lateral association and their tilt with respect to the bilayer normal.     

The stability of transmembrane helices: A molecular dynamics study on the isolated helices of bacteriorhodopsin

Bacteriorhodopsin (bR) continues to be a proven testing ground for the study of integral membrane proteins (IMPs). It is important to study the stability of the individual helices of bR, as they are postulated to exist as independently stable transmembrane helices (TMHs) and also for their utility as templates for modeling other IMPs with the postulated seven-helix bundle topology. Toward this purpose, the seven helices of bR have been studied by molecular dynamics simulation in this study. The suitability of using the backbone-dependent rotamer library of side-chain conformations arrived at from the data base of globular protein structures in the case TMHs has been tested by another set of 7 helix simulations with the side-chain orientations taken from this library. The influence of the residue's net charge on the helix stability was examined by simulating the helices III, IV, and VI (from both of the above sets of helices) with zero net charge on the side chains. The results of these 20 simulations demonstrate in general the stability of the isolated helices of bR in conformity with the two-stage hypothesis of IMP folding. However, the helices I, II, V, and VII are more stable than the other three helices. The helical nature of certain regions of III, IV, and VI are influenced by factors such as the net charge and orientation of several residues. It is seen that the residues Arg, Lys, Asp, and Glu (charged residues), and Ser, Thr, Gly, and Pro, play a crucial role in the stability of the helices of bR. The backbone-dependent rotamer library for the side chains is found to be suitable for the study of TMHs in IMP. © 1996 John Wiley & Sons, Inc.     

Prediction of rotational orientation of transmembrane helical segments of integral membrane proteins using new environment-based propensities for amino acids derived from structural analyses

Alpha-helical integral-membrane proteins (IMPs) play a key role in many biological processes, such as signal transduction, and are targets for >50% of current therapeutic drugs. In contrast to their significant abundance and biological importance, they comprise <1% of structurally solved proteins. In the absence of experimental evidence, molecular modeling of IMP structures is an alternative for providing structural information and aiding further experimental design. In the current work, we propose two new amino acid lipid-facing propensity scales derived from the structural analysis of a nonredundant set of water-soluble proteins. The new scales, pi and delta, perform as well or better than published scales (Carugo's hydrophobicity and kPROT scales) in predicting the lipid-facing side of helical segments of a set of structurally solved IMPs, thus indicating (a) that the folding properties of water-soluble proteins and IMPs are similar, and (b) that the new scales will prove useful in modeling the transmembrane segments of IMPs.     

A study of the membrane-water interface region of membrane proteins

The most conspicuous structural characteristic of the alpha-helical membrane proteins is their long transmembrane alpha-helices. However, other structural elements, as yet largely ignored in statistical studies of membrane protein structure, are found in those parts of the protein that are located in the membrane-water interface region. Here, we show that this region is enriched in irregular structure and in interfacial helices running roughly parallel with the membrane surface, while beta-strands are extremely rare. The average amino acid composition is different between the interfacial helices, the parts of the transmembrane helices located in the interface region, and the irregular structures. In this region, hydrophobic and aromatic residues tend to point toward the membrane and charged/polar residues tend to point away from the membrane. The interface region thus imposes different constraints on protein structure than do the central hydrocarbon core of the membrane and the surrounding aqueous phase.     

Transmembrane helix uniformity examined by spectral mapping of torsion angles

The environment and unique balance of molecular forces within lipid bilayers has a profound impact upon the structure, dynamics, and function of membrane proteins. We describe the biophysical foundations for the remarkable uniformity of many transmembrane helices that result from the molecular interactions within lipid bilayers. In fact, the characteristic uniformity of transmembrane helices leads to unique spectroscopic opportunities allowing for phi,psi torsion angles to be mapped directly onto solid state nuclear magnetic resonance (NMR) PISEMA spectra. Results from spectral simulations, the solid state NMR-derived structure of the influenza A M2 proton channel transmembrane domain, and high-resolution crystal structures of 27 integral membrane proteins demonstrate that transmembrane helices tend to be more uniform than previously thought. The results are discussed through the definition of a preferred range of backbone varphi,psi torsion angles for transmembrane alpha helices and are presented with respect to improving biophysical characterizations of integral membrane proteins.     

Robust Driving Forces for Transmembrane Helix Packing

The packing structures of transmembrane helices are traditionally attributed to patterns in residues along the contact surface. In this view, besides keeping the helices confined in the membrane, the bilayer has only a minor effect on the helices structure. Here, we use two different approaches to show that the lipid environment has a crucial effect in determining the cross-angle distribution of packed helices. We analyzed structural data of a membrane proteins database. We show that the distribution of cross angles of helix pairs in this database is statistically indistinguishable from the cross-angle distribution of two noninteracting helices imbedded in the membrane. These results suggest that the cross angle is, to a large extent, determined by the tilt angle of the individual helices. We test this hypothesis using molecular simulations of a coarse-grained model that contains no specific residue interactions. These simulations reproduce the same cross-angle distribution as found in the database. As the tilt angle of a helix is dominated by hydrophobic mismatch between the protein and surrounding lipids, our results indicate that hydrophobic mismatch is the dominant factor guiding the transmembrane helix packing. Other short-range forces might then fine-tune the structure to its final configuration.     

Structural features of transmembrane helices

A total of 160 transmembrane helices of 15 non-homologous high-resolution X-ray protein structures have been analyzed in respect of their structural features. The dihedral angles and hydrogen bonds of the helical sections that span the hydrophobic interior of the lipid bilayer have been investigated. The Ramachandran plot of protein channels and solute transporters exhibit a significant shift Delta (phi- and psi-angles) of Delta mean (+4.5 degrees and -5.4 degrees ), compared to a reference group of 151 alpha-helices of the same average length derived from water-soluble globular proteins. At the C-termini of transmembrane helices structural motifs equivalent to the Gly-caps of helices in globular proteins have been found, with two third of the transmembrane Gly-caps taking up a primary structure that is typically not found at helix termini exposed to a polar solvent. The structural particularities reported here are relevant for the three-dimensional modelling of membrane protein structures.     

kPROT: a knowledge-based scale for the propensity of residue orientation in transmembrane segments. Application to membrane protein structure prediction

Modeling of integral membrane proteins and the prediction of their functional sites requires the identification of transmembrane (TM) segments and the determination of their angular orientations. Hydrophobicity scales predict accurately the location of TM helices, but are less accurate in computing angular disposition. Estimating lipid-exposure propensities of the residues from statistics of solved membrane protein structures has the disadvantage of relying on relatively few proteins. As an alternative, we propose here a scale of knowledge-based Propensities for Residue Orientation in Transmembrane segments (kPROT), derived from the analysis of more than 5000 non-redundant protein sequences. We assume that residues that tend to be exposed to the membrane are more frequent in TM segments of single-span proteins, while residues that prefer to be buried in the transmembrane bundle interior are present mainly in multi-span TMs. The kPROT value for each residue is thus defined as the logarithm of the ratio of its proportions in single and multiple TM spans. The scale is refined further by defining it for three discrete sections of the TM segment; namely, extracellular, central, and intracellular. The capacity of the kPROT scale to predict angular helical orientation was compared to that of alternative methods in a benchmark test, using a diversity of multi-span alpha-helical transmembrane proteins with a solved 3D structure. kPROT yielded an average angular error of 41 degrees, significantly lower than that of alternative scales (62 degrees -68 degrees ). The new scale thus provides a useful general tool for modeling and prediction of functional residues in membrane proteins. A WWW server (http://bioinfo.weizmann.ac.il/kPROT) is available for automatic helix orientation prediction with kPROT.     

Helix packing in polytopic membrane proteins: role of glycine in transmembrane helix association.

The nature and distribution of amino acids in the helix interfaces of four polytopic membrane proteins (cytochrome c oxidase, bacteriorhodopsin, the photosynthetic reaction center of Rhodobacter sphaeroides, and the potassium channel of Streptomyces lividans) are studied to address the role of glycine in transmembrane helix packing. In contrast to soluble proteins where glycine is a noted helix breaker, the backbone dihedral angles of glycine in transmembrane helices largely fall in the standard alpha-helical region of a Ramachandran plot. An analysis of helix packing reveals that glycine residues in the transmembrane region of these proteins are predominantly oriented toward helix-helix interfaces and have a high occurrence at helix crossing points. Moreover, packing voids are generally not formed at the position of glycine in folded protein structures. This suggests that transmembrane glycine residues mediate helix-helix interactions in polytopic membrane proteins in a fashion similar to that seen in oligomers of membrane proteins with single membrane-spanning helices. The picture that emerges is one where glycine residues serve as molecular notches for orienting multiple helices in a folded protein complex.     

A novel scoring function for predicting the conformations of tightly packed pairs of transmembrane alpha-helices

Pairs of helices in transmembrane (TM) proteins are often tightly packed. We present a scoring function and a computational methodology for predicting the tertiary fold of a pair of alpha-helices such that its chances of being tightly packed are maximized. Since the number of TM protein structures solved to date is small, it seems unlikely that a reliable scoring function derived statistically from the known set of TM protein structures will be available in the near future. We therefore constructed a scoring function based on the qualitative insights gained in the past two decades from the solved structures of TM and soluble proteins. In brief, we reward the formation of contacts between small amino acid residues such as Gly, Cys, and Ser, that are known to promote dimerization of helices, and penalize the burial of large amino acid residues such as Arg and Trp. As a case study, we show that our method predicts the native structure of the TM homodimer glycophorin A (GpA) to be, in essence, at the global score optimum. In addition, by correlating our results with empirical point mutations on this homodimer, we demonstrate that our method can be a helpful adjunct to mutation analysis. We present a data set of canonical alpha-helices from the solved structures of TM proteins and provide a set of programs for analyzing it (http://ashtoret.tau.ac.il/~sarel). From this data set we derived 11 helix pairs, and conducted searches around their native states as a further test of our method. Approximately 73% of our predictions showed a reasonable fit (RMS deviation <2A) with the native structures compared to the success rate of 8% expected by chance. The search method we employ is less effective for helix pairs that are connected via short loops (<20 amino acid residues), indicating that short loops may play an important role in determining the conformation of alpha-helices in TM proteins.     

Substitution rates in α-helical transmembrane proteins

It has been shown previously that some membrane proteins have a conserved core of amino acid residues. This idea not only serves to orient helices during model building exercises but may also provide insight into the structural role of residues mediating helix-helix interactions. Using experimentally determined high-resolution structures of alpha-helical transmembrane proteins we show that, of the residues within the hydrophobic transmembrane spans, the residues at lipid and subunit interfaces are more evolutionarily variable than those within the lipid-inaccessible core of a polypeptide's transmembrane domain. This supports the idea that helix-helix interactions within the same polypeptide chain and those at the interface between different polypeptide chains may arise in distinct ways. To show this, we use a new method to estimate the substitution rate of an amino acid residue given an alignment and phylogenetic tree of closely related proteins. This method gives better sensitivity in the otherwise-conserved transmembrane domains than a conventional similarity analysis and is relatively insensitive to the sequences used.     

The probable arrangement of the helices in G protein-coupled receptors.

G protein-coupled receptors form a large family of integral membrane proteins whose amino acid sequences have seven hydrophobic segments containing distinctive sequence patterns. Rhodopsin, a member of the family, is known to have transmembrane alpha-helices. The probable arrangement of the seven helices, in all receptors, was deduced from structural information extracted from a detailed analysis of the sequences. Constraints established include: (1) each helix must be positioned next to its neighbours in the sequence; (2) helices I, IV and V must be most exposed to the lipid surrounding the receptor and helix III least exposed. (1) is established from the lengths of the shortest loops. (2) is determined by considering: (i) sites of the most conserved residues; (ii) other sites where variability is restricted; (iii) sites that accommodate polar residues; (iv) sites of differences in sequence between pairs or within groups of closely related receptors. Most sites in the last category should be in unimportant positions and are most useful in determining the position and extent of lipid-facing surface in each helix. The structural constraints for the receptors are used to allocate particular helices to the peaks in the recently published projection map of rhodopsin and to propose a tentative three-dimensional arrangement of the helices in G protein-coupled receptors.     

Lipid-protein interactions in biological membranes: a structural perspective

Lipid molecules bound to membrane proteins are resolved in some high-resolution structures of membrane proteins. An analysis of these structures provides a framework within which to analyse the nature of lipid-protein interactions within membranes. Membrane proteins are surrounded by a shell or annulus of lipid molecules, equivalent to the solvent layer surrounding a water-soluble protein. The lipid bilayer extends right up to the membrane protein, with a uniform thickness around the protein. The surface of a membrane protein contains many shallow grooves and protrusions to which the fatty acyl chains of the surrounding lipids conform to provide tight packing into the membrane. An individual lipid molecule will remain in the annular shell around a protein for only a short period of time. Binding to the annular shell shows relatively little structural specificity. As well as the annular lipid, there is evidence for other lipid molecules bound between the transmembrane alpha-helices of the protein; these lipids are referred to as non-annular lipids. The average thickness of the hydrophobic domain of a membrane protein is about 29 A, with a few proteins having significantly smaller or greater thicknesses than the average. Hydrophobic mismatch between a membrane protein and the surrounding lipid bilayer generally leads to only small changes in membrane thickness. Possible adaptations in the protein to minimise mismatch include tilting of the helices and rotation of side chains at the ends of the helices. Packing of transmembrane alpha-helices is dependent on the chain length of the surrounding phospholipids. The function of membrane proteins is dependent on the thickness of the surrounding lipid bilayer, sometimes on the presence of specific, usually anionic, phospholipids, and sometimes on the phase of the phospholipid.     

Empirical lipid propensities of amino acid residues in multispan alpha helical membrane proteins

Characterizing the interactions between amino acid residues and lipid molecules is important for understanding the assembly of transmembrane helices and for studying membrane protein folding. In this study we develop TMLIP (TransMembrane helix-LIPid), an empirically derived propensity of individual residue types to face lipid membrane based on statistical analysis of high-resolution structures of membrane proteins. Lipid accessibilities of amino acid residues within the transmembrane (TM) region of 29 structures of helical membrane proteins are studied with a spherical probe of radius of 1.9 A. Our results show that there are characteristic preferences for residues to face the headgroup region and the hydrocarbon core region of lipid membrane. Amino acid residues Lys, Arg, Trp, Phe, and Leu are often found exposed at the headgroup regions of the membrane, where they have high propensity to face phospholipid headgroups and glycerol backbones. In the hydrocarbon core region, the strongest preference for interacting with lipids is observed for Ile, Leu, Phe and Val. Small and polar amino acid residues are usually buried inside helical bundles and are strongly lipophobic. There is a strong correlation between various hydrophobicity scales and the propensity of a given residue to face the lipids in the hydrocarbon region of the bilayer. Our data suggest a possibly significant contribution of the lipophobic effect to the folding of membrane proteins. This study shows that membrane proteins have exceedingly apolar exteriors rather than highly polar interiors. Prediction of lipid-facing surfaces of boundary helices using TMLIP1 results in a 54% accuracy, which is significantly better than random (25% accuracy). We also compare performance of TMLIP with another lipid propensity scale, kPROT, and with several hydrophobicity scales using hydrophobic moment analysis.     

Molecular Dynamics Simulations of Micelle Formation around Dimeric Glycophorin A Transmembrane Helices

Insertion and formation of membrane proteins involves the interaction of protein helices with one another in lipid environments. Researchers have studied glycophorin A (GpA) transmembrane helices embedded in sodium dodecyl sulfate (SDS) micelles to identify contacts significant for helix dimerization. However, a detailed picture of the conformation and dynamics of the GpA-SDS system cannot be obtained solely through experiment. Molecular dynamics simulations of SDS and a GpA dimer can provide an atomic-level picture of SDS aggregation and helix association. We report 2.5-ns simulations of GpA wild-type and mutants in a preformed micelle as well as a 32-ns simulation showing the formation of a complete micelle around wild-type GpA from an initially random placement of SDS molecules in an aqueous environment. In the latter case, an initial instability of GpA helices in water is reversed after the helices become surrounded by SDS. The properties of the spontaneously formed micelle surrounding the GpA are indistinguishable from those of the preformed micelle surrounding the GpA dimer.