Identification of a human specificAlu insertion in the factor XIIIB gene

The factor XIIIB gene was examined to determine the nature of a previously described 300 bp restriction fragment length polymorphism (RFLP) seen in the human population. Polymerase chain reaction analysis of different regions within the factor XIIIB gene was carried out to define a high resolution map of the region encompassing the polymorphism, followed by DNA sequence analysis. AnAlu insertion was found to be the source of this variation. ThisAlu repeat is a member of the human specific-1 (HS-1) subfamily, although one of the five diagnostic nucleotides is a cattarhine specific (CS) subfamily mutation, suggesting that it may represent an intermediate form in the evolution between these two subfamilies. Subsequently, we developed a PCR-based assay to detect the polymorphism, rendering it a more useful marker for genetic linkage studies and genome mapping. This insertion is also a valuable polymorphism for human population studies, as demonstrated by the large variations in allele frequencies seen in three population groups.     

Modeling the amplification dynamics of human Alu retrotransposons

Retrotransposons have had a considerable impact on the overall architecture of the human genome. Currently, there are three lineages of retrotransposons (Alu, L1, and SVA) that are believed to be actively replicating in humans. While estimates of their copy number, sequence diversity, and levels of insertion polymorphism can readily be obtained from existing genomic sequence data and population sampling, a detailed understanding of the temporal pattern of retrotransposon amplification remains elusive. Here we pose the question of whether, using genomic sequence and population frequency data from extant taxa, one can adequately reconstruct historical amplification patterns. To this end, we developed a computer simulation that incorporates several known aspects of primate Alu retrotransposon biology and accommodates sampling effects resulting from the methods by which mobile elements are typically discovered and characterized. By modeling a number of amplification scenarios and comparing simulation-generated expectations to empirical data gathered from existing Alu subfamilies, we were able to statistically reject a number of amplification scenarios for individual subfamilies, including that of a rapid expansion or explosion of Alu amplification at the time of human–chimpanzee divergence.     

A ubiquitous family of repeated DNA sequences in the human genome

Renatured DNA from human and many other eukaryotes is known to contain 300-nucleotide duplex regions formed from renatured repeated sequences. These short repeated DNA sequences are widely believed to be interspersed with single copy DNA sequences. In this work we show that at least half of these 300-nucleotide duplexes share a cleavage site for the restriction enzyme AluI. This site is located 170 nucleotides from one end. This Alu family of repeated sequences makes up at least 3% of the genome and is present in several hundred thousand copies.Inverted repeated sequences are also known to contain a short 300-nucleotide duplex region. We find that at least half of the 300-nucleotide duplex regions in inverted repeated sequences also have an AluI restriction site located 170 nucleotides from one end.By driven renaturation techniques, the Alu family is shown to be distributed over a minimum range of 30% to 60% of the genome. (The breadth of this range reflects the presence of inverted repeated sequences which, in part, include the Alu family.) These findings imply that the interspersion pattern of repeated and single copy sequences in human DNA is largely dominated by one family of repeated sequences.     

Alu elements of the primate major histocompatibility complex

The chromosomal region constituting the major histocompatibility complex (MHC) has undergone complex evolution that is often difficult to decipher. An important aid in the elucidation of the MHC evolution is the presence of Alu elements (repeats) which serve as markers for tracing chromosomal rearrangements. As the first step toward the establishment of sets of evolutionary markers for the MHC, Alu elements present in selected MHC haplotypes of the human species, the gorilla, and the chimpanzee were identified. Restriction fragments of cosmid clones from the libraries of the three species were hybridized with Alu-specific probes, Alu elements were amplified by the polymerase chain reaction, and the amplification products were sequenced. In some cases, sequences of the regions flanking the Alu elements were also obtained. Altogether, 31 new Alu elements were identified, representing six Alu subfamilies. The average density of Alu elements in the MHC is one element per four kilobases (kb) of sequence. Alu elements have apparently been inserted steadily into the MHC over the last 65 million years (my). On average, one Alu element is inserted into the primate MHC every 4 my. Analysis of the human DR3 haplotype supports its origin by duplication from an ancestral haplotype consisting of DRB1 and DRB2 genes. The sharing of an old Alu element by the DRB1 and DRB2 genes, in turn, supports their divergence from a common ancestor more than 55 my ago.     

Large-scale discovery of insertion hotspots and preferential integration sites of human transposed elements

Throughout evolution, eukaryotic genomes have been invaded by transposable elements (TEs). Little is known about the factors leading to genomic proliferation of TEs, their preferred integration sites and the molecular mechanisms underlying their insertion. We analyzed hundreds of thousands nested TEs in the human genome, i.e. insertions of TEs into existing ones. We first discovered that most TEs insert within specific ‘hotspots’ along the targeted TE. In particular, retrotransposed Alu elements contain a non-canonical single nucleotide hotspot for insertion of other Alu sequences. We next devised a method for identification of integration sequence motifs of inserted TEs that are conserved within the targeted TEs. This method revealed novel sequences motifs characterizing insertions of various important TE families: Alu, hAT, ERV1 and MaLR. Finally, we performed a global assessment to determine the extent to which young TEs tend to nest within older transposed elements and identified a 4-fold higher tendency of TEs to insert into existing TEs than to insert within non-TE intergenic regions. Our analysis demonstrates that TEs are highly biased to insert within certain TEs, in specific orientations and within specific targeted TE positions. TE nesting events also reveal new characteristics of the molecular mechanisms underlying transposition.     

Mono-allelic retrotransposon insertion addresses epigenetic transcriptional repression in human genome

Background

Retrotransposons have been extensively studied in plants and animals and have been shown to have an impact on human genome dynamics and evolution. Their ability to move within genomes gives retrotransposons to affect genome instability.

Methods

we examined the polymorphic inserted AluYa5, evolutionary young Alu, in the progesterone receptor gene to determine the effects of Alu insertion on molecular environment. We used mono-allelic inserted cell lines which carry both Alu-present and Alu-absent alleles. To determine the epigenetic change and gene expression, we performed restriction enzyme digestion, Pyrosequencing, and Chromatin Immunoprecipitation.

Results

We observed that the polymorphic insertion of evolutionally young Alu causes increasing levels of DNA methylation in the surrounding genomic area and generates inactive histone tail modifications. Consequently the Alu insertion deleteriously inactivates the neighboring gene expression.

Conclusion

The mono-allelic Alu insertion cell line clearly showed that polymorphic inserted repetitive elements cause the inactivation of neighboring gene expression, bringing aberrant epigenetic changes.     

A genetic and functional analysis of the unusually large variable region in the M·Alu I DNA-(cytosine C5 )-methyltransferase

The M·AluI DNA-(cytosine C5)-methyltransferase (5mC methylase) acts on the sequence 5′-AGCT-3′. The amino acid sequences of known 5mC methylases contain ten conserved motifs, with a variable region between Motifs VIII and IX that contains one or more “target-recognizing domains” (TRDs) responsible for DNA sequence specificity. Monospecific 5mC methylases are believed to have only one TRD, while multispecific 5mC methylases have as many as five. M·AluI has the second-largest variable region of all known 5mC methylases, and sequence analysis reveals five candidate TRDs. In testing whether M·AluI is in fact monospecific it was found that AGCT methylation represents only 80–90% of the methylating activity of this enzyme, while control experiments with the enzyme M·HhaI gave no unexplained activity. Because individual TRDs can be deleted from multispecific methylases without general loss of activity, a series of insertion and deletion mutants of the M·AluI variable region were prepared. All deletions that removed more than single amino acids from the variable region caused significant loss of activity; a sensitive in vivo assay for methylase activity based on McrBC restriction suggested that the central portion of the variable region is particularly important. In some cases, multispecific methylases can accommodate a TRD from another multispecific methylase, thereby acquiring an additional specificity. When TRDs were moved from a multispecific methylase into two different locations in the variable region of M·AluI, all hybrid enzymes had greatly reduced activity and no new specificities. M·AluI thus behaves in most respects as a monospecific methylase despite the remarkable size of its variable region.     

Alu Repeats in the Human Genome

Highly repetitive DNA sequences account for more than 50% of the human genome. The L1 and Alu families harbor the most common mammalian long and short interspersed elements. An Alu element is a dimer of similar, but not identical, fragments of total size about 300 bp, and originates from the 7SL RNA gene. Each element contains a bipartite promoter for RNA polymerase III, a poly(A) tract located between the monomers, a 3"-terminal poly(A) tract, and numerous CpG islands, and is flanked by short direct repeats. Alu repeats constitute more than 10% of the human genome and are capable of retroposition. Possibly, these elements played an important part in genome evolution. Insertion of an Alu element into a functionally important genome region or other Alu-dependent alterations of gene functions cause various hereditary disorders and are probably associated with carcinogenesis. In total, 14 Alu families differing in diagnostic mutations are known. Some of these, which are present in the human genome, are polymorphic and relatively recently have been inserted into new loci. Alu copies transposed during ethnic divergence of the human population are useful markers for evolutionary genetic studies.     

Two distinct P element subfamilies in the genome of Drosophila bifasciata

The genome of Drosophila bifasciata harbours two distinct subfamilies of P-homologous sequences, designated M-type and O-type elements based on similarities to P element sequences from other species. Both subfamilies have some general features in common: they are of similar length (M-type: 2935 bp, O-type: 2986 bp), are flanked by direct repeats of 8 by (the presumptive target sequence), contain terminal inverted repeats, and have a coding region consisting of four exons. The splice sites are at homologous positions and the exons have the coding capacity for proteins of 753 amino acids (M-type) and 757 amino acids (O-type). It seems likely that both types of element represent functional transposons. The nucleotide divergence of the two P element subfamilies is high (31%). The main structural difference is observed in the terminal inverted repeats. Whereas the termini of M-type elements consist of 31 by inverted repeats, the inverted repeats of the O-type elements are interrupted by non-complementary stretches of DNA, 12 by at the 5′ end and 14 by at the 3′ end. This peculiarity is shared by all members of the O-type subfamily. Comparison with other P element sequences indicates incongruities between the phylogenies of the species and the P transposons. M-type and O-type elements apparently have no common origin in the D. bifasciata lineage. The M-type sequence seems to be most closely related to the P element from Scaptomyza pallida and thus could be considered as a more recent invader of the D. bifasciata gene pool. The origin of the O-type elements cannot be unequivocally deduced from the present data. The sequence comparison also provides new insights into conserved domains with possible implications for the function of P transposons.     

Gene conversion as a secondary mechanism of short interspersed element (SINE) evolution.

The Alu repetitive family of short interspersed elements (SINEs) in primates can be subdivided into distinct subfamilies by specific diagnostic nucleotide changes. The older subfamilies are generally very abundant, while the younger subfamilies have fewer copies. Some of the youngest Alu elements are absent in the orthologous loci of nonhuman primates, indicative of recent retroposition events, the primary mode of SINE evolution. PCR analysis of one young Alu subfamily (Sb2) member found in the low-density lipoprotein receptor gene apparently revealed the presence of this element in the green monkey, orangutan, gorilla, and chimpanzee genomes, as well as the human genome. However, sequence analysis of these genomes revealed a highly mutated, older, primate-specific Alu element was present at this position in the nonhuman primates. Comparison of the flanking DNA sequences upstream of this Alu insertion corresponded to evolution expected for standard primate phylogeny, but comparison of the Alu repeat sequences revealed that the human element departed from this phylogeny. The change in the human sequence apparently occurred by a gene conversion event only within the Alu element itself, converting it from one of the oldest to one of the youngest Alu subfamilies. Although gene conversions of Alu elements are clearly very rare, this finding shows that such events can occur and contribute to specific cases of SINE subfamily evolution.     

The association between HLA-A alleles and an Alu dimorphism near HLA-G

The AluYb8 sequences are a subfamily of short interspersed Alu retroelements that have been amplified within the human genome during recent evolutionary time and are useful polymorphic markers for studies on the origin of human populations. We have identified a new member of the Yb8 subfamily, AluyHG, located between the HLA-H and -G genes and 88-kb telomeric of the highly polymorphic HLA-A gene within the alpha block of the major histocompatibility complex (MHC). The AluyHG element was characterised with a view to examining the association between AluyHG and HLA-A polymorphism and reconstructing the history of the MHC alpha block. A specific primer pair was designed for a simple PCR assay to detect the absence or presence (dimorphism) of the AluyHG element within the DNA samples prepared from a panel of 46 homozygous cell-lines containing complete or recombinant ancestral haplotypes (AH) of diverse ethnic origin and 92 Caucasoid and Asian subjects on which HLA-A typing was available. The AluyHG insertion was most strongly associated with HLA-A2 and, to a lesser degree with HLA-A1, -A3, -A11, and A-19. The gene frequency of the AluyHG insertion for 146 Caucasians and 94 Chinese-Han was 0.30 and 0.32 and there was no significant difference between the observed and expected frequencies. The results of the association studies and the phylogenetic analysis of HLA-A alleles suggest that the AluyHG sequence was integrated within the progenitor of HLA-A2, but has been transferred by recombination to other human ancestral populations. In this regard, the dimorphic AluyHG element is an important diagnostic marker for HLA association studies and could help in elucidating the evolution and functions of the MHC alpha block and polymorphism within and between ancestral haplotypes. Received: 7 December 2000 / Accepted: 28 February 2001     

A dimorphic Alu Sb-like insertion in COL3A1 is ethnic-specific

Alu elements are a class of repetitive DNA sequences found throughout the human genome that are thought to be duplicated via an RNA intermediate in a process termed retroposition. Recently inserted Alu elements are closely related, suggesting that they are derived from a single source gene or closely related source genes. Analysis of the type III collagen gene (COL3A1) revealed a polymorphic Alu insertion in intron 8 of the gene. The Alu insertion in the COL3A1 gene had a high degree of nucleotide identity to the Sb family of Alu elements, a family of older Alu elements. The Alu sequence was less similar to the consensus sequence for the PV or Sb2 subfamilies, subfamilies of recently inserted Alu elements. These data support the observations that at least three source genes are active in the human genome, one of which is distinct from the PV and Sb2 subfamilies and predates either of these two subfamilies. Appearance of the Alu insertion in different ethnic populations suggests that the insertion may have occurred in the last 100,000 years. This Alu insert should be a useful marker for population studies and for marking COL3A1 alleles.     

FLAGdb/FST: a database of mapped flanking insertion sites (FSTs) of Arabidopsis thaliana T-DNA transformants

A large collection of T-DNA insertion transformants of Arabidopsis thaliana has been generated at the Institute of Agronomic Research, Versailles, France. The molecular characterisation of the insertion sites is currently performed by sequencing genomic regions flanking the inserted T-DNA (FST). The almost complete sequence of the nuclear genome of A.thaliana provides the framework for organising FSTs in a genome oriented database, FLAGdb/FST (http://genoplante-info.infobiogen.fr). The main scope of FLAGdb/FST is to help biologists to find the FSTs that interrupt the genes in which they are interested. FSTs are anchored to the genome sequences of A.thaliana and positions of both predicted genes and FSTs are shown graphically on sequences. Requests to locate the genomic position of a query sequence are made using BLAST programs. The response delivered by FLAGdb/FST is a graphical representation of the putative FSTs and of predicted genes in a 20 kb region.     

The Cassandra retrotransposon landscape in sugar beet (Beta vulgaris) and related Amaranthaceae: recombination and re-shuffling lead to a high structural variability

Background and AimsPlant genomes contain many retrotransposons and their derivatives, which are subject to rapid sequence turnover. As non-autonomous retrotransposons do not encode any proteins, they experience reduced selective constraints leading to their diversification into multiple families, usually limited to a few closely related species. In contrast, the non-coding Cassandra terminal repeat retrotransposons in miniature (TRIMs) are widespread in many plants. Their hallmark is a conserved 5S rDNA-derived promoter in their long terminal repeats (LTRs). As sugar beet (Beta vulgaris) has a well-described LTR retrotransposon landscape, we aim to characterize TRIMs in beet and related genomes.MethodsWe identified Cassandra retrotransposons in the sugar beet reference genome and characterized their structural relationships. Genomic organization, chromosomal localization, and distribution of Cassandra-TRIMs across the Amaranthaceae were verified by Southern and fluorescent in situ hybridization.Key resultsAll 638 Cassandra sequences in the sugar beet genome contain conserved LTRs and thus constitute a single family. Nevertheless, variable internal regions required a subdivision into two Cassandra subfamilies within B. vulgaris. The related Chenopodium quinoa harbours a third subfamily. These subfamilies vary in their distribution within Amaranthaceae genomes, their insertion times and the degree of silencing by small RNAs. Cassandra retrotransposons gave rise to many structural variants, such as solo LTRs or tandemly arranged Cassandra retrotransposons. These Cassandra derivatives point to an interplay of template switch and recombination processes – mechanisms that likely caused Cassandra’s subfamily formation and diversification.ConclusionsWe traced the evolution of Cassandra in the Amaranthaceae and detected a considerable variability within the short internal regions, whereas the LTRs are strongly conserved in sequence and length. Presumably these hallmarks make Cassandra a prime target for unequal recombination, resulting in the observed structural diversity, an example of the impact of LTR-mediated evolutionary mechanisms on the host genome.     

Chromosome-specific subfamilies within human alphoid repetitive DNA

Nucleotide sequence data of about 20 X 10(3) base-pairs of the human tandemly repeated alphoid DNA are presented. The DNA sequences were determined from 45 clones containing EcoRI fragments of alphoid DNA isolated from total genomic DNA. Thirty of the clones contained a complete 340 base-pair dimer unit of the repeat. The remaining clones contained alphoid DNA with fragment lengths of 311, 296, 232, 170 and 108 base-pairs. The sequences obtained were compared with an average alphoid DNA sequence determined by Wu & Manuelidis (1980). The divergences ranged from 0.6 to 24.6% nucleotide changes for the first monomer and from 0 to 17.8% for the second monomer of the repeat. On the basis of identical nucleotide changes at corresponding positions, the individual repeat units could be shown to belong to one of several distinct subfamilies. The number of nucleotide changes defining a subfamily generally constitutes the majority of nucleotide changes found in a member of that subfamily. From an evaluation of the proportion of the total amount of alphoid DNA, which is represented by the clones studied, it is estimated that the number of subfamilies of this repeat may be equal to or exceed the number of chromosomes. The expected presence of only one or a few distinct subfamilies on individual chromosomes is supported by the study, also presented, of the nucleotide sequence of 17 cloned fragments of alphoid repetitive DNA from chromosome 7. These chromosome-specific repeats all contain the characteristic pattern of 36 common nucleotide changes that defines one of the subfamilies described. A unique restriction endonuclease (NlaIII) cleavage site present in this subfamily may be useful as a genetic marker of this chromosome. A family member of the interspersed Alu repetitive DNA was also isolated and sequenced. This Alu repeat has been inserted into the human alphoid repetitive DNA, in the same way as the insertion of an Alu repeat into the African green monkey alphoid DNA.     

Characteristic Sequence Pattern in the 5- to 20-bp Upstream Region of Primate Alu Elements

We conducted comprehensive sequence analysis of 5′ flanking regions of primate Alu elements. Information contents were computed and frequencies of 1024 pentanucleotides were measured to approximate the location of a characteristic sequence and to specify its pattern(s), which may be involved in the integration of Alu elements into their host genomes. A large number of samples was used, the wide region of the 5′ end of Alu elements was analyzed, and comparisons were made among different subfamilies. Through our analyses, ``TTTTAAAAA' or ``(T) _m (A) _n ' can be stated as a candidate for the characteristic sequence pattern, which resides around the region 5 to 20 base pairs upstream of the 5′ end of Alu elements. This characteristic sequence pattern was more prominent in the sequences of younger Alus, which is a strong indication that the sequence pattern has a role at the time of Alu integration. Received: 10 May 1999 / Accepted: 1 October 1999     

Transposition burst of mariner-like elements in the sequenced genome of Rhodnius prolixus

Transposable elements (TEs) are widespread in insect's genomes. However, there are wide differences in the proportion of the total DNA content occupied by these repetitive sequences in different species. We have analyzed the TEs present in R. prolixus (vector of the Chagas disease) and showed that 3.0% of this genome is occupied by Class II TEs, belonging mainly to the Tc1-mariner superfamily (1.65%) and MITEs (1.84%). Interestingly, most of this genomic content is due to the expansion of two subfamilies belonging to: irritans himar, a well characterized subfamily of mariners, and prolixus1, one of the two novel subfamilies here described. The high amount of sequences in these subfamilies suggests that bursts of transposition occurred during the life cycle of this family. In an attempt to characterize these elements, we performed an in silico analysis of the sequences corresponding to the DDD/E domain of the transposase gene. We performed an evolutionary analysis including network and Bayesian coalescent-based methods in order to infer the dynamics of the amplification, as well as to estimate the time of the bursts identified in these subfamilies. Given our data, we hypothesized that the TE expansions occurred around the time of speciation of R. prolixus around 1.4 mya. This suggestion lays on the “Transposon Model” of TE evolution, in which the members of a TE population that are replicative active are present at multiple loci in the genome, but their replicative potential varies, and of the “Life Cycle Model” that states that when present-day TEs have been involved in amplification bursts, they share an ancestral copy that dates back to this initial amplification.