Problem of aspartimide formation in Fmoc-based solid-phase peptide synthesis using Dmab group to protect side chain of aspartic acid.

The sequence-dependent, acid- or base-catalysed aspartimide formation is one of the most serious side reactions in solid-phase synthesis of peptides containing aspartic acid. In the present work, we investigated the susceptibility of 4-(N-[1-(4,4-dimethyl-2,6-dioxocyclohexylidene)-3-methylbutyl]amino)benzyl (Dmab), an aspartic acid beta-carboxy side-chain protecting group, for aspartimide formation. As a model, 15-amino acid-residue galanin fragment analogue containing the Asp-Ala motif was used during Fmoc-based solid-phase synthesis. Our study showed a strong tendency of Dmab-protected peptide to form aspartimide with unusual high efficiency. Furthermore, to investigate the susceptibility of Asp-Ala motif for aspartimide formation during the synthesis using Asp(ODmab), a 5-amino acid-residue galanin fragment LGPDA, different types of resin linkers, variety of Fmoc-deprotection conditions and coupling methods were applied.     

Alpha- and beta- aspartyl peptide ester formation via aspartimide ring opening.

The undesirable reaction of aspartimide formation has been proved to occur under both acid and base conditions in solid-phase peptide synthesis and is dependent on the beta-carboxyl protecting group, the acid or base used during the synthesis, as well as the peptide sequence. The hydrolysis of aspartimide-containing peptides, especially during HPLC purification, yields a mixture of alpha- and beta-aspartyl peptides that can not be purified easily. A previous study demonstrated that treatment of aspartimide-containing peptides with methanol in the presence of 2% diisopropylethylamine in solution leads to alpha- and beta-aspartyl peptide methyl esters. Taking advantage of these results and aiming at elucidating the optimal conditions for aspartimide ring opening, the effect of different types and concentrations of alcohols (primary and secondary) and bases (diisopropylethylamine, collidine, 4-pyrrolidinopyridine, 1-methyl-2-pyrrolidone, piperidine and KCN) was tested at various temperatures and reaction times. The best results were obtained with a combination of a primary alcohol and diisopropylethylamine, while aspartimide ring opening by secondary alcohols occurred only at high temperatures. The optimal conditions were also applied to solid-phase peptide synthesis.     

Preventing aspartimide formation in Fmoc SPPS of Asp‐Gly containing peptides — practical aspects of new trialkylcarbinol based protecting groups

In our efforts to develop a universal solution to the problem of aspartimide formation in Fmoc SPPS, we investigated the application of our new β‐trialkylmethyl protected aspartic acid building blocks to the synthesis of peptides containing the Asp‐Gly motif. The N^α‐Fmoc aspartic acid β‐tri‐(ethyl/propyl/butyl)methyl esters were used in the synthesis of the classic model peptide scorpion toxin II (VKDGYI), and their effectiveness in minimising aspartimide formation during extended piperidine treatments was evaluated. Furthermore, we compared their efficacy against that of the commonly used approach of adding acids to the Fmoc deprotection solution. Finally, we applied our aspartic acid building blocks to the stepwise Fmoc SPPS of teduglutide, a human GLP‐2 analogue, whose synthesis is made challenging by extensive aspartimide formation. In all experiments, our approach led to almost complete reduction of aspartimide formation with accompanied suppression of aspartic acid epimerisation. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Unexpected aspartimide formation during coupling reactions using Asp(OAl) in solid-phase peptide synthesis

Succinimide ring closure is a well-documented side reaction in the synthesis of certain Asp-containing peptides. This side reaction is typically acid- or base-catalyzed, and its occurrence during coupling reactions has not been previously noted. This unforeseen manifestation of aspartimide formation was detected while exploring a new strategy for side-chain to side-chain lactam formation on a solid support to synthesize cyclo[D-Asp2,Dap5]dynorphin A-(1–11) amide. The availability of allyl protecting groups, which provide an additional level of orthogonality in solid-phase peptide synthesis, was very appealing for use in preparing this conformationally constrained analogue. We found that the allyl ester (OAl) was not sufficient protection from this side reaction in this susceptible D-Asp2-Gly3 sequence. Remarkably, the aspartimide formation appeared to occur during the coupling reaction in the absence of base if excess coupling reagent was present.     

Detection of human neutrophil elastase with peptide-bound cross-linked ethoxylate acrylate resin analogs.

An assessment of elastase-substrate kinetics and adsorption at the solid-liquid interface of peptide-bound resin was made in an approach to the solid-phase detection of human neutrophil elastase (HNE), which is found in high concentration in chronic wound fluid. N-succinyl-alanine-alanine-proline-valine-p-nitroanilide (suc-Ala-Ala-Pro-Val-pNA), a chromogenic HNE substrate, was attached to glycine-cross-linked ethoxylate acrylate resins (Gly-CLEAR) by a carbodiimide reaction. To assess the enzyme-substrate reaction in a two-phase system, the kinetic profile of resin-bound peptide substrate hydrolysis by HNE was obtained. A glycine and di-glycine spacer was placed between the resin polymer and substrate to assess the steric and spatial requirements of resin to substrate with enzyme hydrolysis. The enzymatic activities of suc-Ala-Ala-Pro-Val-pNA and suc-Ala-Ala-Pro-Ala-pNA on the solid-phase resin were compared with similar analogs in solution. An increase in visible wavelength absorbance was observed with increasing amounts of substrate-resin and enzyme concentration. Enzyme hydrolysis of the resin-bound substrate was also demonstrated on a polypropylene surface, which was employed for visible absorbance of released chromophore. A soluble active substrate analog was released from the resin through saponification of the ethoxylate ester linkages in the resin polymer. The resin-released conjugate of the HNE substrate demonstrated an increased dose response with increasing enzyme concentration. The synthesis and assay of elastase substrates bound to CLEAR resin gives an understanding of substrate-elastase adsorption and activity at the resin's solid-liquid interface for HNE detection with a solid-phase peptide.     

Unexpected aspartimide formation during coupling reactions using Asp(OAl) in solid-phase peptide synthesis

Summary Succinimide ring closure is a well-documented side reaction in the synthesis of certain Asp-containing peptides. This side reaction is typically acid-or base-catalyzed, and its occurrence during coupling reactions has not been previously noted. This unforeseen manifestation of aspartimide formation was detected while exploring a new strategy for side-chain to side-chain lactam formation on a solid support to synthesizecyclo[D-Asp², Dap⁵]dynorphin A-(1-11) amide. The availability of allyl protecting groups, which provide an additional level of orthogonality in solid-phase peptide synthesis, was very appealing for use in preparing this conformationally constrained analogue. We found that the allyl ester (OAl) was not sufficient protection from this side reaction in this susceptible D-Asp²-Gly³ sequence. Remarkably, the aspartimide formation appeared to occur during the coupling reaction in the absence of base if excess coupling reagent was present.     

Sequence dependence of aspartimide formation during 9-fluorenylmethoxycarbonyl solid-phase peptide synthesis

Summary We have examined the sequence dependence of aspartimide formation during Fmoc-based solid-phase synthesis of the peptide Val-Lys-Asp-X-Tyr-Ile. The extent of aspartimide formation and subsequent conversion to the - or -piperidide was characterized and quantitated by analytical reversed-phase high-performance liquid chromatography and fast atom bombardment mass spectrometry. Aspartimide formation occurred for X=Arg(Pmc), Asn(Trt), Asp(OtBu), Cys(Acm), Gly, Ser, Thr and Thr(tBu). No single approach was found that could inhibit this side reaction for all sequences. The most effective combinations, in general, for minimization of aspartimide formation were (i) tert-butyl side-chain protection of aspartate, piperidine for removal of the Fmoc group, and either 1-hydroxybenzotriazole or 2,4-dinitrophenol as an additive to the piperidine solution; or (ii) 1-adamantyl side-chain protection of aspartate and 1,8-diazabicyclo[5.4.0]undec-7-ene for removal of the Fmoc group.     

On the use of N‐dicyclopropylmethyl aspartyl‐glycine synthone for backbone amide protection

To prevent aspartimide formation and related side products in Asp‐Xaa, particularly Asp‐Gly‐containing peptides, usually the 2‐hydroxy‐4‐methoxybenzyl (Hmb) backbone amide protection is applied for peptide synthesis according to the Fmoc‐protocols. In the present study, the usefulness of the recently proposed acid‐labile dicyclopropylmethyl (Dcpm) protectant was analyzed. Despite the significant steric hindrance of this bulky group, N‐terminal H‐(Dcpm)Gly‐peptides are quantitatively acylated by potent acylating agents, and alternatively the dipeptide Fmoc‐Asp(OtBu)‐(Dcpm)Gly‐OH derivative can be used as a building block. In contrast to the Hmb group, Dcpm is inert toward acylations, but is readily removed in the acid deprotection and resin‐cleavage step. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

1,4-diazepine-2,5-dione ring formation during solid phase synthesis of peptides containing aspartic acid beta-benzyl ester.

The Fmoc-based SPPS of H-Xaa-Asp(OBzl)-Yaa-Gly-NH(2) sequences results in side reactions yielding not only aspartimide peptides and piperidide derivatives, but also 1,4-diazepine-2,5-dione-peptides. Evidence is presented to show that the 1,4-diazepine-2,5-dione derivative is formed from the aspartimide peptide. The rate of this ring transformation depends primarily on the tendency to aspartimide and piperidide formation, which is influenced by the nature of the amino acid following the aspartic acid beta-benzyl ester (Xaa). However the bulkiness of the amino acid side chain preceeding the aspartic acid beta-benzyl ester (Yaa) is also important. Under certain conditions the 1,4-diazepine-2,5-dione peptide derivative may even be formed dominantly, which is a highly undesirable side reaction in peptide synthesis, but which provides a new way for the synthesis of diazepine peptide derivatives with targeted biological or pharmacological activity.     

Application of Dmb-Dipeptides in the Fmoc SPPS of Difficult and Aspartimide-Prone Sequences

Mutter’s pseudoproline dipeptides and Sheppard’s Hmb derivatives are powerful tools for enhancing synthetic efficiency in Fmoc SPPS. They work by exploiting the natural propensity of N-alkyl amino acids to disrupt the formation of the secondary structures during peptide assembly. Their use results in better and more predictable acylation and deprotection kinetics, enhanced reaction rates, and improved yields of crude products. However, these approaches have certain limitations: pseudoproline dipeptides can only be used for sequences containing serine or threonine, and the coupling of the amino acid following the Hmb residue can be extremely difficult. To alleviate some of these shortcomings, we have prepared a range of Fmoc-Aaa-(Dmb)Gly-OH dipeptides and tested their efficacy in the synthesis of a number of challenging hydrophobic peptides. We also compared the efficiency of N-Dmb against N-Hmb backbone protection in preventing aspartimide formation in the Fmoc SPPS of peptides containing the Asp-Gly sequence.     

Base-induced side reactions in Fmoc-solid phase peptide synthesis:Minimization by use of piperazine as Nα-deprotectionreagent

Summary Base-induced aspartimide (cyclic imide) and subsequent base adduct formation in the Fmoc-solid phase synthesis of sensitive sequences are serious side reactions that are difficult to both anticipate and control. The effect of extended treatment of piperazine as N^α-Fmoc deprotection reagent on two sensitive peptide sequences was examined. For comparison, other bases were also investigated, including piperidine, 1-hydroxypiperidine, tetrabutylammonium fluoride, and 1,8-diazabicyclo[5.4.0]undec-7-ene. The results showed that all bases induced varying degrees of both aspartimide and, in some cases, base adduct formation, although piperazine caused the least side reaction. Use ofN-(2-hydroxy-4-methoxybenzyl) peptide backbone amide protection was confirmed to confer complete protection against side reaction. In the absence of such protection, for all bases, the use of 1-hydroxybenzotriazole as additive had some, but not complete, beneficial effect in further reducing side reaction. Best results were obtained with piperazine containing 0.1M 1-hydroxybenzotriazole indicating that this reagent merits serious consideration for N^α-deprotection in the Fmoc-solid phase synthesis of base-sensitive sequences. A further advantage of this reagent is that it causes little racemisation of resin-bound C-terminal cysteine, an occasionally serious base-mediated problem in Fmoc-solid phase assembly. A preliminary account of this work was presented at the 25th European Peptide Symposium, Budapest, Hungary, 1998.     

Linear analogues derived from the first EGF‐like domain of human blood coagulation factor VII: enhanced inhibition of FVIIa/TF complex activity by backbone modification through aspartimide formation

Coagulation factor VII bound to its cofactor tissue factor is the physiological initiator of blood coagulation. The interaction between factor VII and tissue factor involves all four of the structural modules found in factor VII, with the most significant contribution coming from the first EGF‐like domain. In this study, the synthesis and biological activity of several analogues derived from the first EGF‐like domain of FVII comprising the sequence 45–83 are reported on. The six cysteine residues found in the native protein were replaced by Abu. The peptides were isolated from a multicomponent mixture following standard Fmoc solid phase synthesis. Purification and characterisation of the heterogeneous product showed that aspartimide formation was a major side‐reaction, occurring predominantly at the Asp⁴⁶‐Gly⁴⁷ and Asn⁵⁷‐Gly⁵⁸ dipeptides. Although relatively common in peptide synthesis, the extent to which this side‐reaction had taken place was considered surprising. Reported herein are the analytical methods used to isolate and characterise several of the modified products. Also, the inhibitory effect of these peptides on the formation and enzymatic activity of the factor VIIa/tissue factor complex have been compared. Surprisingly, the peptide containing an iso‐Asp residue at position 57 possessed 66‐fold higher inhibitory activity compared with the original target peptide. A possible explanation for this increase in observed activity is presented. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

Use of Oxyma as pH modulatory agent to be used in the prevention of base-driven side reactions and its effect on 2-chlorotrityl chloride resin

The presence of low pKa N-hydroxylamines is beneficial in peptide chemistry as they reduce some base-mediated side reactions. Here we evaluated the applicability and buffering capacity of Ethyl 2-cyano-2-(hydroxyimino) acetate (Oxyma) in the prevention of aspartimide/piperidide formation and Pro-based overcoupling and compared it with the performance of HOBt and HOAt. In addition, the compatibility of these additives with the highly acid-labile 2-chlorotrityl chloride resin is examined.     

Combining a polar resin and a pseudo-proline to optimize the solid-phase synthesis of a 'difficult sequence'.

This paper describes the optimization of a synthesis of a difficult sequence related to a 12-mer sequence of a Pan DR epitope (PADRE). Elongation was followed by on-line monitoring of the N(alpha)-Fmoc removal adapted for the batch methodology. Studying the intrinsic factors related to the peptide-resin, such as substitution level, resin nature and backbone protecting group, has led to an increase in the elongation yield and purity of the crude peptide. Optimal elongation was obtained by combining a polar resin such as PEGA and a pseudo-proline as the backbone protecting group.     

Orthogonal solid-phase synthesis of N-glycopeptides using backbone protection to eliminate aspartimide formation

Summary The side reaction of aspartimide formation during the activation of aspartic acid-containing peptides was eliminated by using backbone protection. The methodology was applied in the orthogonal solid-phase synthesis of N-glycopeptides.     

Influence of chemical surfactants on the biodegradation of crude oil by a mixed bacterial culture.

The effects of surfactant physicochemical properties, such as the hydrophile-lipophile balance (HLB) and molecular structure, on the biodegradation of 2% w/v Bow River crude oil by a mixed-bacterial culture were examined. Viable counts increased 4.6-fold and total petroleum hydrocarbon (TPH) biodegradation increased 57% in the presence of Igepal CO-630, a nonylphenol ethoxylate (HLB 13, 0.625 g/L). Only the nonylphenol ethoxylate with an HLB value of 13 substantially enhanced biodegradation. The surfactants from other chemical classes with HLB values of 13 (0.625 g/L) had no effect or were inhibitory. TPH biodegradation enhancement by Igepal CO-630 occurred at concentrations above the critical micelle concentration. When the effect of surfactant on individual oil fractions was examined, the biodegradation enhancement for the saturate and aromatic fractions was the same. In all cases, biodegradation resulted in increased resin and asphaltene concentrations. Optimal surfactant concentrations for TPH biodegradation reduced resin and asphaltene formation. Chemical surfactants have the potential to improve crude oil biodegradation in complex microbial systems, and surfactant selection should consider factors such as molecular structure, HLB, and surfactant concentration.     

Synthesis of poly(aspartimide)-based bio-glycoconjugates

The purpose of this programme was to synthesize and analyze new bioconjugates of interest for the potential inhibition of the influenza virus, using poly(aspartimide) as a polymer support. The macromolecular targets were obtained by attaching various sialic acid-linker-amine compounds to poly(aspartimide). ¹H and ¹³C NMR studies were then performed to analyze the degree of incorporation of the sialic acid-linker-amine compounds within the poly(aspartimide). These studies illustrated that the incorporation was dependent on the nature of the spacer between the sugar and the amine functionality. Thus aliphatic spacers favoured the inclusion of sialic acid onto the polymer support whereas compounds having only an aromatic moiety between the sialic acid and the amine could not be easily incorporated.     

Detection and control of aspartimide formation in the synthesis of cyclic peptides

Extensive two-dimensional NMR analysis was employed to characterize the structural identity of the macrocyclic peptide lactam and the imide analog, a major side reaction product when allyl ester was used to protect the side chain of aspartic acid. A straightforward protocol modification was developed to minimize aspartimide formation during the synthesis of cyclic peptides.     

Synthesis of disulfated peptides corresponding to the N‐terminus of chemokines receptors CXCR6 (CXCR61–20) and DARC (DARC8–42) using a sulfate‐protecting group strategy

Tyrosine sulfation is a post translational modification that occurs on integral membrane and secreted proteins, and is required for mediating crucial biological processes. Until recently the synthesis of sTyr peptides, especially those containing multiple sTyr residues, were among the most challenging peptides to prepare. We recently described an efficient strategy for Fmoc‐based solid phase synthesis of sTyr peptides in which the sulfate group in the sTyr residue(s) is protected with a DCV group (FmocTyr(SO₃DCV)OH, 1 ). After cleavage of the peptide from the support the DCV group is removed by hydrogenolysis. Here we demonstrate that sTyr peptides containing Met or Trp residues can be prepared using our sulfate‐protecting group strategy by preparing peptides corresponding to residues 1–20 of chemokine receptor CXCR6 and 8–42 of chemokine receptor DARC. Removing the DCV groups at the end of the syntheses was readily achieved, without any reduction of the indole ring in Trp, by performing the hydrogenolysis in the presence of triethylamine. These conditions were found to be particularly efficient for removing the DCV group and superiour to our original conditions using H₂, ammonium formate, Pd/C. The presence of Met was found not to interfere with the removal of the DCV group. The use of pseudoproline dipeptides and N‐backbone protection with the 2,4‐dimethoxybenzyl group were found to be very effective tactics for preventing aggregation and aspartimide formation during the synthesis of these peptides. We also report an alternative and more cost effective synthesis of amino acid 1 . Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Tri(propylene glycol) glycerolate diacrylate cross-linked polystyrene: a new resin support for solid-phase peptide synthesis.

A highly flexible, mechanically and chemically stable copolymer, tri(propylene glycol) glycerolate diacrylate cross-linked polystyrene (PS-TRPGGDA), was synthesized by the suspension polymerization and employed as a solid support for peptide synthesis. The beaded polymer support containing secondary hydroxyl functional groups in the cross-linker was used as the growth site for peptide synthesis. The procedure is unique and cost-effective in that it avoids the initial functionalization steps required for most of the styrene-based polymer supports. The resin was characterized by 13C-CP-MAS NMR spectroscopy and the morphologic features of the resin were investigated using scanning electron microscopy. Swelling studies conducted on the new support revealed that the PS-TRPGGDA resin undergoes more effective swelling and solvation than PS-DVB resin in all solvents used in peptide synthesis. The efficiency of the new support was demonstrated by synthesizing a 'difficult' sequence Ala-Arg-(Ala)6-Lys and comparing it with commercially available Merrifield and Sheppard resins. The synthetic efficiency was further demonstrated by the synthesis of a 24-residue NR 2A peptide substrate of calcium/calmodulin-binding peptide. The high yield and purity of the peptide synthesized on the novel support indicates the positive role of the flexible and hydrophilic cross-linking agent in the solid support.