Stereodesign of chiral para-substituted calix[4]arenes

According to the hypothesis that the chirality of molecule hosts is a cause of their enantioselectivity, the chirality of para-substituted calix[4]arenes was analyzed quantitatively. The relationship between types of para-substituents and the dissymmetry of the 2D (two-dimensional) entrance into the cavity and the whole 3D (three-dimensional) cavity of calix[4]arenes was studied by means of the enantiomer dissimilarity factor (EDF) method for quantitative evaluation of molecular chirality. The design of the most chiral, and probably enantioselective, para-substituted calix[4]arenes was planned such that all four substituents should be different and the two largest should be near each other (adjacent). It was, on the other hand, shown that the 2D chiral entrance determines chirality of the whole 3D structures of these molecules. This phenomenon is interpreted as an example of the chirality transition from 2D into 3D space.Electronic Supplementary Material available.     

Voltage-dependent block of endothelial volume-regulated anion channels by calix[4]arenes

We have studiedthe effects of calix[4]arenes on the volume-regulated anionchannel (VRAC) currents in cultured calf pulmonary artery endothelialcells. TS- and TS-TM-calix[4]arenes induced a fastinhibition at positive potentials but were ineffective at negativepotentials. Maximal block occurred at potentials between 30 and 50 mV.Lowering extracellular pH enhanced the block and shifted the maximuminhibition to more negative potentials. Current inhibition was alsoaccompanied by an increased current noise. From the analysis of thecalix[4]arene-induced noise, we obtained a single-channelconductance of 9.3 ± 2.1 pS (n = 9) at +30 mV. The voltage- and time-dependent block were describedusing a model in which calix[4]arenes bind to a site at anelectrical distance of 0.25 inside the channel with an affinity of 220 µM at 0 mV. Binding occludes VRAC at moderately positive potentials,but calix[4]arenes permeate the channel at more positivepotentials. In conclusion, our data suggest an open-channel block ofVRAC by calix[4]arenes that also depends on the protonationof the binding site within the pore.

     

Development of molecularly imprinted polymers as tailored templates for the solid-state [2+2] photodimerization

In this study, a molecularly imprinted polymer (MIP) was prepared to selectively template the [2+2] photodimerization of trans-1,2-bis(4-pyridyl)ethylene. First, an MIP selective for rctt-tetrakis(4-pyridyl)cyclobutane, which is the [2+2] photodimerization product of trans-1,2-bis(4-pyridyl)ethylene, was prepared from methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA). The non-covalent MIP showed enhanced affinity for both the templating agent, rctt-tetrakis(4-pyridyl)cyclobutane, and the alkene precursor, trans-1,2-bis(4-pyridyl)ethylene. The solid-state photodimerization reaction proceeded in significantly higher yields in the presence of the MIP. Control reactions carried out in the absence of polymer gave no product, and reactions carried out in the presence of a non-imprinted polymer and an MIP imprinted with a different template, 3-hydroxymethylpyridine, gave much lower yields of the cyclobutane photodimerization product. The outcome of the MIP-templated photodimerization reaction was strongly influenced by the binding site heterogeneity of the non-covalently imprinted polymers. For example, higher yields were observed with decreasing olefin loadings levels on the MIPs. This binding site heterogeneity was characterized via application of the Freundlich binding model to the experimentally measured binding isotherms. These confirmed that the non-covalent MIPs had very few high-affinity binding sites, which greatly limits the capacity and ultimately the utility of these materials as templates in synthetic organic applications.     

Molecular design of new nitramine explosives: 1,3,5,7-tetranitro-8-(nitromethyl)-4-imidazolino[4,5-b]4-imidazolino-[4,5-e] pyridine and its N-oxide

Two new nitramine compounds containing pyridine, 1,3,5,7-tetranitro-8-(nitromethyl) -4-imidazolino[4,5-b]4-imidazolino-[4,5-e]pyridine and its N-oxide 1,3,5,7-tetranitro-8- (nitromethyl)-4-imidazolino[4,5-b]4-imidazolino-[4,5-e]pyridine-4-ol were proposed. Density functional theory (DFT) has been employed to study the molecular geometries, electronic structures, infrared spectra, and thermodynamic properties at the B3LYP/6-31G* level. Their detonation performances evaluated using the Kamlet-Jacobs equations with the calculated densities and heats of formation are superior to those of HMX. The predicted densities of them were ca. 2 g*cm^-3, detonation velocities were over 9 km*s^-1, and detonation pressures were about 40 GPa, showing that they may be potential candidates of high energy density materials (HEDMs). The natural bond orbital analysis indicated that N-NO₂ bond is the trigger bond during thermolysis process. The stability of the title compounds is slightly lower than that of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12- hexaazaisowurtzitane (CL-20). The results of this study may provide basic information for the molecular design of new HEDMs.     

Calix[4]arenes C-136 and C-137 hyperpolarize myometrium mitochondria membranes

Calixarenes are supramolecular compounds interacting with bioactive molecules and ions, causing changes in biochemical and biophysical processes. The aim of this work was to study the effects of calix[4]arenes C-136, C-137, and C-138 at the level of polarization of the rat myometrium mitochondria membrane. The structure of synthesized calix[4]arene molecules was confirmed by the methods of ¹H NMR and infrared spectroscopy. Calix[4]arenes C-136 and C-137 each possess two chalcone amide moieties at the lower rim, while calix[4]arene C-138, only one. Calix[4]arenes C-136 and C-137 differ by the presence of ether or hydroxyl groups, respectively, at the lower rim of calix[4]arene skeleton, as well as the length of alkyl spacer between chalcone amide group and the macrocycle. It was shown that calix[4]arenes C-136, C-137, and C-138 form micelles in aqueous medium and in dimethylformamide (DMF). Irradiation of micelles with an argon laser on the flow cytometer results in the rise of autofluorescence. In an aqueous medium, calix[4]arene micelles interact with a positively charged voltage-sensitive fluorescent probe TMRM, which can testify to the presence of negative charge in these structures. However, calix[4]arene micelles do not interact with TMRM in DMF solution. The mitochondrial membrane potential was measured using fluorescent dyes MTG and TMRM with confocal microscopy and fluorescent dye TMRM with flow cytometry. Experiments were conducted on myometrium cells in culture and on suspension of digitonin-permeabilized uterus myocytes. It was shown that the fluorescent signal was stable during the time of experiment. Calix[4]arenes C-136 and C-137 (10 μM) hyperpolarize mitochondria membranes. At maximum, the effect was 173% relative to the control. At the same time, calix[4]arene C-138 did not influence the mitochondria membrane potential. The relationship between the structural organization of investigated calix[4]arene molecules and their effect on polarization of the mitochondria membrane is discussed.     

DFT study of new bipyrazole derivatives and their potential activity as corrosion inhibitors

In the present work, a theoretical study of five bipyrazolic-type organic compounds, 4-{bis[(3,5-dimethyl-1H-pyrazolyl-1-yl)methyl]-amino}phenol (1), N1,N1-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl}]-N4,N4-dimethyl-1,4-benzenediamine (2), N,N-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl]aniline (3), 4-[bis(3,5-dimethyl pyrazol-1-yl-methyl)-amino]butan-1-ol (4) and ethyl4-[bis(3,5-dimethyl-1H-pyrazol-1-yl-methyl) aminobenzoate] (5), has been performed using density functional theory (DFT) at the B3LYP/6-31G(d) level in order to elucidate the different inhibition efficiencies and reactive sites of these compounds as corrosion inhibitors. The efficiencies of corrosion inhibitors and the global chemical reactivity relate to some parameters, such as EHOMO, ELUMO, gap energy (ΔE) and other parameters, including electronegativity (χ), global hardness (η) and the fraction of electrons transferred from the inhibitor molecule to the metallic atom (ΔN). The calculated results are in agreement with the experimental data on the whole. In addition, the local reactivity has been analyzed through the Fukui function and condensed softness indices.     

Density functional theory study of the potassium complexation of an unsymmetrical 1,3-alternate calix[4]-crown-5-N-azacrown-5 bearing two different crown rings

Theoretical studies of an unsymmetrical calix[4]-crown-5-N-azacrown-5 (1) in a fixed 1,3-alternate conformation and the complexes 1·K⁺(a), 1·K⁺(b), 1·K⁺(c) and 1·K⁺K⁺ were performed using density functional theory (DFT) at the B3LYP/6-31G* level. The fully optimized geometric structures of the free macroligand and its 1:1 and 1:2 complexes, as obtained from DFT calculations, were used to perform natural bond orbital (NBO) analysis. The two main types of driving force metal–ligand and cation–π interactions were investigated. NBO analysis indicated that the stabilization interaction energies (E ₂) for O…K⁺ and N…K⁺ are larger than the other intermolecular interactions in each complex. The significant increase in electron density in the RY* or LP* orbitals of K⁺ results in strong host–guest interactions. In addition, the intermolecular interaction thermal energies (ΔE, ΔH, ΔG) were calculated by frequency analysis at the B3LYP/6-31G* level. For all structures, the most pronounced changes in the geometric parameters upon interaction are observed in the calix[4]arene molecule. The results indicate that both the intermolecular electrostatic interactions and the cation–π interactions between the metal ion and π orbitals of the two pairs that face the inverted benzene rings play a significant role.     

Thieno[3,4-f]isothianaphthene and its N-substitutes: a theoretical insight

Density functional theory is used to study the geometries, electronic structure, aromaticity, the singlet/triplet splitting energies and the vertical ionization energy of tricyclic nonclassical thiophene, Thieno[3,4-f]isothianaphthene, and its five N-substitutes at B3LYP/aug-cc-PVDZ level of theory. Geometry studies show that all of the compounds have a highly symmetric structure with a rigid planar. Calculated results confirm that there exists considerable conjugation and aromaticity over the rings and those tricyclic nonclassical thiophenes may be candidates for conductive polymers. The studies of electronic structure and splitting energies show that those nonclassical thiophenes have more or less a diradical structure.     

Light-induced self-assemblies suitable for photodimerization and their light-induced [2+2] cycloaddition: Light as a control factor of crystal growth

The reaction of Cd(NO₃)₂ and CF₃COONH₄ with bpe (trans-1,2-(bis(4-pyridyl)ethene)) ligands was investigated for a light-induced solid-state [2+2] cycloaddition reaction. The three structures (1 [Cd(bpe)₂(CF₃COO)₂]_n, 2 [Cd(bpe)₂(NO₃)₂]_n, and 3 [Cd(NO₃)(μ-NO₃)(H₂O)(bpe)_1.5]_n) formed in light while only compound 1 (or 1-dark) was formed in the dark. All three compounds were completely transformed to the final [2+2] cycloaddition products containing rctt-tetrakis(4-pyridyl)cyclobutane (rctt-tpcb; rctt means regional cis, trans, and trans of the four pyridyl groups attached to the cyclobutane ring) in solution under a natural light after 4 weeks. Among the final products, only one 3-D structure (4 [{Cd(rctt-tpcb)₂(NO₃)₂}{Cd(rctt-tpcb)₂(OH)₂}]_n) with a good crystallinity was determined by the X-ray diffraction technique. These observations were also in line with the spectroscopic results such as ¹H NMR. Meanwhile, 3 was also prepared separately and exposed to natural light. X-ray and NMR studies showed that 3 was completely transformed to 4 containing rctt-tpcb by a light-induced cycloaddition reaction for the 4 weeks. The reaction progress was further monitored by fluorescent spectroscopy. 1-dark also underwent the solid-state [2+2] cycloaddition under the natural light over four weeks.     

Calculating the geometry and Raman spectrum of physiological bis(<Emphasis Type="SmallCaps">l</Emphasis>-histidinato)copper(II): an assessment of DFT functionals for aqueous and isolated systems

Reliable density functional theory (DFT) calculations can be performed in conjuction with spectroscopic measurements to elucidate the structural properties of physiologically important bis(amino acidato)copper(II) compounds in solutions. They can provide insight into the influence of intermolecular interactions on the molecular geometry in the crystal lattice or solution when compared with a DFT gas-phase minimum. Our previous paper [Markovi? et al. (2014) Eur J Inorg Chem 198] reported the DFT-determined geometries and Raman spectra for different conformers of physiological bis(l-histidinato)copper(II) with 20 explicit water molecules, as calculated using the B3LYP functional. The present study examined the reliability of those B3LYP results by applying the M06 functional instead, as it should better account for noncovalent interactions. The water molecules were positioned more compactly around the complex by M06 than by B3LYP. The accuracies of the two functionals when compared to relevant experimental data showed that M06 was better at reproducing in-plane Cu?N bond lengths but B3LYP gave more accurate axial Cu?O distances. Both functionals reproduced the experimental Raman spectrum at pH 8 to similar levels of accuracy and provided precise information on the Cu(II) coordination mode and conformation in aqueous solution. Additionally, we assessed several DFT and DFT-D functionals (BP86, B3LYP, B3LYP-D, M06, M06 L, wB97XD, mPW2PLYPD) by using them to model the geometries of experimental bis(l-histidinato)copper(II) crystalline conformations as isolated systems, and then benchmarking the results against those from high-level second-order pertubation Møller–Plesset (MP2) calculations. Although this assessment resulted in an equivocal conclusion because the MP2 results for the isolated complex were inconsistent with the corresponding DFT outcomes, it does provide new information on future benchmark options.     

Theoretical studies on 2-diazo-4,6-dinitrophenol derivatives aimed at finding superior propellants

In an attempt to find superior propellants, 2-diazo-4,6-dinitrophenol (DDNP) and its –NO₂, –NH₂, –CN, –NC, –ONO₂, and –NF₂ derivatives were studied at the B3LYP/6-311++G^** level of density functional theory (DFT). Sensitivity was evaluated using bond dissociation enthalpies (BDEs) and molecular surface electrostatic potentials. The C–NO₂ bond appears to be the trigger bond during the thermolysis process for these compounds, except for the –ONO₂ and –NF₂ derivatives. Electrostatic potential results show that electron-withdrawing substituents make the charge imbalance more anomalous, which may change the strength of the bond, especially the weakest trigger bond. Most of the DDNP derivatives have the impact sensitivities that are higher than that of DDNP, making them favorable for use as solid propellants in micro-rockets. The theoretical densities (ρ), heats of formation (HOFs), detonation energies (Q), detonation pressures (P), and detonation velocities (D) of the compounds were estimated. The effects of various substituent groups on ρ, HOF, Q, D, and P were investigated. Some derivatives exhibit perfect detonation properties. The calculated relative specific impulses (I _r,sp) of all compounds except for –NH₂ derivatives were higher than that of DDNP, and also meet the requirements of propellants.     

Synthesis,antimicrobial and antiviral activity of substituted benzimidazoles

In the present study we have synthesized (4-nitrophenyl)-[2-(substituted phenyl)-benzoimidazol-1-yl]-methanones, (2-bromophenyl)-[2-(substituted phenyl)-benzoimidazol-1-yl]-methanone analogues (1–14) and evaluated them for their antimicrobial and antiviral potential. The results of antimicrobial screening indicated that none of the synthesized compounds were effective against the tested bacterial strains. Compounds 3, 11, 13 and compounds 5, 11, 12 were found to be active against Aspergillus niger and Candida albicans respectively, and may be further developed as antifungal agents. Furthermore, evaluation against a panel of different viruses pointed out the selective activity of compounds 5 and 6 against vaccinia virus and Coxsackie virus B4.     

Modelling Metal Complexes of Calixarene Esters and Phosphine Oxides Using Molecular Mechanics

This paper focuses on the molecular modelling of a number of calixarene ester and phosphine oxide metal ion complexes. Monte Carlo conformational searches, in conjunction with the Merck Molecular Force Field, were carried out using Spartan SGI Version 5.0.1. running on Silicon Graphics O2 workstations. In the case of the calix[4]arene tetraesters, the optimised models strongly suggest that the selectivity of these ligands is strongly related to the eight-fold nature of the coordination with the Na⁺ ion, while coordination with the Li⁺ ion, for example, is merely three-fold. This feature of eight-fold coordination is also observed in the models of the complexes formed by the calix[4]arene tetraphosphine oxides with calcium. However, whereas the eight-fold coordination is unique to the model of the TPOL:Ca²⁺ complex among the ions modelled, this mode of coordination occurs for TPOS with sodium and potassium, in addition to calcium. This concurs with the observation that calcium selectivity is obtained with ion selective electrodes based on TPOL but not TPOS. Though the cavity in the calix[5]arenes PPOL and PPOLx and the calix[6]arene HPOL, in their uncomplexed form, are much larger than that of the corresponding calix[4]arenes, the pattern of selectivity is the same – the ligands are selective for calcium. The models of the complexes of these larger calixarenes, such as PPOL:Ca²⁺, strongly suggest that the reason for this similarity is that four of the available phosphine oxide groups complex with the calcium ion, and the others are forced away from the cavity region for steric reasons. The resulting eight-fold coordination, is therefore, similar to that of the calix[4]arenes studied.Electronic Supplementary Material available.     

Synthesis and Antitumor Activity of 2-Alkanesulfinyl (or Alkanesulfonyl)-7-methyl-5H-1,3,4-thiadiazolo[3,2-a]pyrimidin-5-ones

The repressing effect on the propagation of cultured Ehrlich ascites tumor cells by 1, 3, 4-thiadiazolo [3, 2-a] pyrimidine and s-triazolo [1, 5-a] pyrimidine derivatives was examined. Then the relationship between structure and activity as to a series of active compounds was discussed.

The results showed that substituent groups on the 2-position of 1, 3, 4-thiadiazolo [3, 2-a]-pyrimidine took an important part to reveal the cytotoxic activity. Especially, the strong activity was found among the compounds which had electrophilic substituents such as alkylsulfoxide, alkylsulfone at the 2-position.     

Synthesis and Herbicidal Activity of Phenoxypropionic Acid Derivatives with Imidazo[1,2-α]pyridine Moiety

Phenoxypropionic acid derivatives (Ia-s) with an imidazo[1,2-a]pyridine moiety were synthesized and their herbicidal activities were examined. The activities were affected dramatically by the substituents on the imidazo[1,2-a]pyridine ring, and good substituents to enhance the herbicidal activity were a cyano group at the 3-position and a chlorine atom at the 6-position. Among the compounds, n-propyl 2-[4-(6-chloro-3-cyano-2-imidazo[1,2-a]pyridinyloxy)phenoxy]propionate(Iq) was most active against gramineous weeds and the activity was comparable to that of the commercial herbicide fluazifop-butyl.     

cis-Inhibition of Notch by Endogenous Delta Biases the Outcome of Lateral Inhibition

Lateral inhibition mediated by Delta/Notch (Dl/N) signaling is used throughout development to limit the number of initially equivalent cells that adopt a particular fate [1], [2] and [3]. Although adjacent cells express both Dl ligand and N receptor, signaling between them ultimately occurs in only one direction. Classically, this has been explained entirely by feedback: activated N can downregulate Dl, amplifying even slight asymmetries in the Dl or N activities of adjacent cells [1], [2], [3], [4] and [5]. Here, however, we present an example of lateral inhibition in which unidirectional signaling depends instead on Dl's ability to inhibit N within the same cell, a phenomenon known as cis-inhibition [6], [7], [8], [9], [10] and [11]. By genetically manipulating individual R1/R6/R7 photoreceptor precursors in the Drosophila eye, we show that loss of Dl-mediated cis-inhibition reverses the direction of lateral signaling. Based on our finding that Dl in R1/R6s requires endocytosis to trans-activate but not to cis-inhibit N, we reexamine previously published data from other examples of lateral inhibition. We conclude that cis-inhibition generally influences the direction of Dl/N signaling and should therefore be included in standard models of lateral inhibition.     

Complete basis set,hybrid-DFT study and NBO interpretation of conformational analysis of 2-methoxytetrahydropyran and its thiopyran and selenopyran analogues in relation to the anomeric effect

2-Methoxytetrahydropyran (1), -thiopyran (2) and -selenopyran (3) have been chosen as model compounds to investigate the origin of the anomeric effect (AE). The impacts of the hyperconjugation, electrostatic and steric interactions on the conformational preferences of compounds 1–3 have been analysed by means of complete basis set-4, hybrid-density functional theory (B3LYP/6-311+G**) based methods and natural bond orbital (NBO) interpretation. Both levels of theory showed that the axial conformations of compounds 1–3 are more stable than their equatorial conformations. The Gibbs free energy difference (G _eq–G _ax) values (i.e. ΔG _eq–ax) between the axial and equatorial conformations increase from compound 1 to compound 2 but decrease from compound 2 to compound 3. Based on the NBO results obtained, the AE associated with the electron delocalisation [i.e. Σ(endo-AE_eq + exo-AE_eq) ? Σ(endo-AE_ax + exo-AE_ax)] increase slightly from compound 1 to compound 2 but decrease from compound 2 to compound 3. Similar trend is also observed for the differences between the calculated total steric exchange energy values [i.e. Δ(TSEE)_eq–ax]. On the other hand, the calculated differences between the dipole moment values of the axial and equatorial conformations [i.e. Δ(μ_eq–μ_ax)] decrease from compound 1 to compound 3. These findings led to the proposal that the AE associated with the electron delocalisation (the hyperconjugation effect) is more significant for the explanation of the conformational preferences of compounds 1–3 than the electrostatic model. The correlations between the AE associated with the electron delocalisation, bond orders, TSEE, ΔG _eq–ax, dipole–dipole interactions, structural parameters and conformational behaviours of compounds 1–3 have been investigated.     

A comparative reactivity study of microperoxidases based on hemin, mesohemin and deuterohemin

Three microperoxidases--hemin-6(7)-gly-gly-his methyl ester (HGGH), mesohemin-6(7)-gly-gly-his methyl ester (MGGH) and deuterohemin-6(7)-gly-gly-his methyl ester (DGGH)--have been prepared as models for heme-containing peroxidases by condensation of glycyl-glycyl-L-histidine methyl ester with the propionic side chains of hemin, mesohemin and deuterohemin, respectively. The three microperoxidases differ in two substituents, R, of the protoporphyrin IX framework (HGGH: R=vinyl, MGGH: R=ethyl, DGGH: R=H). X-band and high field EPR spectra show that the microperoxidases exhibit spectroscopic properties similar to those of metmyoglobin, i.e. a high spin ferric S=5/2 signal at g(perpendicular)=6 and g parallel)=2 and an estimated D value of 7.5+/-1cm(-1). The catalytic activities of the microperoxidases towards K4[Fe(CN)6], L-tyrosine methyl ester and 2,2'-azino(bis(3-ethylbenzothiazoline-6-sulfonic acid)) (ABTS) have been investigated. It was found that all three microperoxidases exhibit peroxidase activity and that the reactions follow the generally accepted peroxidase reaction scheme [Biochem. J. 145 (1975) 93-103] with the exception that the initial formation of a Compound I analogue is the rate-limiting step for the whole process. The general activity trend was found to be MGGH approximately DGGH>HGGH. For each microperoxidase, DFT calculations (B3LYP) were made on the reactions of compounds 0, I and II with H+, e- and H+ + e-, respectively, in order to probe the possible relationship between the nature of the 2- and 4-substituents of the hemin and the observed reactivity. The computational modeling indicates that the relative energy differences are very small; solvation and electrostatic effects may be factors that decide the relative activities of the microperoxidases.     

A DFT study on the role of long range correlation interaction and solvent effects in homochiral and heterochiral cyclic trimerization of imidazole based heterocyclic amino acids

Using B3LYP and B97D functionals of density functional theory (DFT), homochiral and heterochiral cyclic trimerization of imidazole based heterocyclic amino acids are studied in gas phase and solvent phase, i. e., Acetonitrile. Both the functionals show that formation of homochiral cyclic tripeptide is thermodynamically and kinetically favorable over its heterochiral counterpart in gas phase. The functional, B97D, decreases the height of reaction barriers significantly compared to those predicted by the functional B3LYP. The reaction pathways explored using PCM implicit solvent model show reduced kinetic favorability for formation of the homochiral cyclic tripeptide over its heterochiral counterpart. The results are substantiated by structural aspects.