Flow‐injection chemiluminescence method to detect a β2 adrenergic agonist

A new method for the detection of β₂ adrenergic agonists was developed based on the chemiluminescence (CL) reaction of β₂ adrenergic agonist with potassium ferricyanide–luminol CL. The effect of β₂ adrenergic agonists including isoprenaline hydrochloride, salbutamol sulfate, terbutaline sulfate and ractopamine on the CL intensity of potassium ferricyanide–luminol was discovered. Detection of the β₂ adrenergic agonist was carried out in a flow system. Using uniform design experimentation, the influence factors of CL were optimized. The optimal experimental conditions were 1 mmol/L of potassium ferricyanide, 10 µmol/L of luminol, 1.2 mmol/L of sodium hydroxide, a flow speed of 2.6 mL/min and a distance of 1.2 cm from ‘Y₂’ to the flow cell. The linear ranges and limit of detection were 10–100 and 5 ng/mL for isoprenaline hydrochloride, 20–100 and 5 ng/mL for salbutamol sulfate, 8–200 and 1 ng/mL for terbutaline sulfate, 20–100 and 4 ng/mL for ractopamine, respectively. The proposed method allowed 200 injections/h with excellent repeatability and precision. It was successfully applied to the determination of three β₂ adrenergic agonists in commercial pharmaceutical formulations with recoveries in the range of 96.8–98.5%. The possible CL reaction mechanism of potassium ferricyanide–luminol–β₂ adrenergic agonist was discussed from the UV/vis spectra. Copyright © 2014 John Wiley & Sons, Ltd.     

Potential of the luminol reaction in the sensitive detection of pesticide residues by flow injection analysis.

This study presents the first analytical application of the luminol chemiluminescence (CL) reaction for the sensitive detection of carbamate residues. Some experiments have been carried out to check the influence of the presence of traces of a N-methylcarbamate (carbaryl) on the CL emission produced from the oxidation of luminol using different oxidants, showing a significant enhancing effect on the CL emission when the oxidation of luminol is produced by potassium permanganate in alkaline medium, this enhancement being proportional to the carbaryl concentration. This fact has permitted the establishment of a sensitive chemiluminescence flow-injection (CL-FIA) method for the direct determination of carbaryl. The optimization of instrumental and chemical variables influencing the CL response has been carried out by applying experimental designs. Under the optimal conditions, the CL intensity was linear for a carbaryl concentration over the range 5-100 ng/mL with a detection limit of 4.9 ng/mL. This luminol-KMnO4-based FIA-CL system in basic medium shows an easy, fast and cheap alternative detection mode for the analysis of carbaryl residues in environmental water samples.     

A novel green analytical procedure for monitoring of azoxystrobin in water samples by a flow injection chemiluminescence method with off‐line ultrasonic treatment

A simple and green flow injection chemiluminescence (FI‐CL) method for determination of the fungicide azoxystrobin was described for the first time. CL signal was generated when azoxystrobin was injected into a mixed stream of luminol and KMnO₄. The CL signal of azoxystrobin could be greatly improved when an off‐line ultrasonic treatment was adopted. Meanwhile, the signal intensity increases with the analyte concentration proportionally. Several variables, such as the ultrasonic parameters, flow rate of reagents, concentrations of sodium hydroxide solution and CL reagents (potassium permanganate, luminol) were investigated, and the optimal CL conditions were obtained. Under optimal conditions, the linear range of 1–100 ng/mL for azoxystrobin was obtained and the detection limit (3σ) was determined as 0.13 ng/mL. The relative standard deviation was 1.5% for 10 consecutive measurements of 20 ng/mL azoxystrobin. The method has been applied to the determination of azoxystrobin residues in water samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Chemiluminescence determination of moxifloxacin in pharmaceutical and biological samples based on its enhancing effect of the luminol–ferricyanide system using a microfluidic chip

A sensitive determination of a synthetic fluoroquinolone antibacterial agent, moxifloxacin (MOX), by an enhanced chemiluminescence (CL) method using a microfluidic chip is described. The microfluidic chip was fabricated by a soft‐lithographic procedure using polydimethyl siloxane (PDMS). The fabricated PDMS microfluidic chip had three‐inlet microchannels for introducing the sample, chemiluminescent reagent and oxidant, and a 500 µm wide, 250 µm deep and 82 mm long microchannel. An enhanced CL system, luminol–ferricyanide, was adopted to analyze the MOX concentration in a sample solution. CL light was emitted continuously after mixing luminol and ferricyanide in the presence of MOX on the PDMS microfluidic chip. The amount of MOX in the luminol–ferricyanide system influenced the intensity of the CL light. The linear range of MOX concentration was 0.14–55.0 ng/mL with a correlation coefficient of 0.9992. The limit of detection (LOD) and limit of quantification (LOQ) were 0.06 and 0.2 ng/mL respectively. The presented method afforded good reproducibility, with a relative standard deviation (RSD) of 1.05% for 10 ng/mL of MOX, and has been successfully applied for the determination of MOX in pharmaceutical and biological samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Application of silver nanoparticles to the chemiluminescence determination of cefditoren pivoxil using the luminol–ferricyanide system

A new simple, accurate and sensitive sequential injection analysis chemiluminescence (CL) detection method for the determination of cefditoren pivoxil (CTP) has been developed. The developed method was based on the enhancement effect of silver nanoparticles on the CL signal arising from a luminol–potassium ferricyanide reaction in the presence of CTP. The optimum conditions relevant to the effect of luminol, potassium ferricyanide and silver nanoparticle concentrations were investigated. The proposed method showed linear relationships between relative CL intensity and the investigated drug concentration at the range 0.001–5000 ng/mL, (r = 0.9998, n = 12) with a detection limit of 0.5 pg/mL and quantification limit of 0.001 ng/mL. The relative standard deviation was 1.6%. The proposed method was employed for the determination of CTP in bulk drug, in its pharmaceutical dosage forms and biological fluids such as human serum and urine. The interference of some common additive compounds such as glucose, lactose, starch, talc and magnesium stearate was investigated. In addition, the interference of some related cephalosporins was tested. No interference was recorded. The obtained sequential injection analysis‐CL results were statistically compared with those from a reported method and did not show any significant differences. Copyright © 2014 John Wiley & Sons, Ltd.     

DPPH·–luminol chemiluminescence system and its application in the determination of scutellarin in pharmaceutical injections and rat plasma with flow injection analysis

In this article, a DPPH·–luminol chemiluminescence (CL) system was reported and the CL mechanism was discussed according to the CL kinetic properties after sequence injecting DPPH· into the DPPH·–luminol reaction mixture. It was observed that scutellarin could inhibit the CL response of the DPPH·–luminol system. Based on this observation, a simple and rapid flow injection CL method was developed for the determination of scutellarin using the inhibition effect in alkaline medium. The optimized chemical conditions for the CL reaction were 5 × 10^?6 mol/L DPPH · and 1.0 × 10^?4 mol/L luminol in 0.01 mol/L NaOH. Under optimized conditions, the CL intensity was inversely proportional to the concentration of scutellarin over the ranges 5–2000 and 40–3200 ng/ml in pharmaceutical injection and rat plasma, respectively. The limits of detection (S/N  = 3) were 5 and 40 ng/ml in preparations and rat plasma, respectively. Furthermore, the precision, recovery and stability of the validated method were acceptable for the determination of scutellarin in both pharmaceutical injections and rat plasma. The presented method was successfully applied in the determination of scutellarin in pharmaceutical injections and real rat plasma samples.     

Flow-injection chemiluminescence determination of catecholamines based on their enhancing effects on the luminol-potassium periodate system.

A rapid and sensitive chemiluminescence (CL) method using flow injection analysis is described for the determination of four catecholamines, dopamine, adrenaline, isoprenaline and noradrenaline, based on their greatly enhancing effects on the CL reaction of luminol-potassium periodate in basic solutions. The optimized chemical conditions for the chemiluminescence reaction were 1.0 x 10(-4) mol/L luminol and 1.0 x 10(-5) mol/L potassium periodate in 0.2 mol/L sodium hydroxide (NaOH). Under the optimized conditions, the calibration graphs relating the CL signal intensity (peak height) to the concentration of the analytes were curvilinear and they were suitable for determining dopamine, adrenaline, isoprenaline, and noradrenaline in the range 0.1-10 ng/mL, 0.1-100 ng/mL, 1-100 ng/mL and 5-50 ng/mL, respectively, with the relative standard deviations of 0.8-1.7%. The detection limits of the method are 0.02 ng/mL for dopamine, 0.01 ng/mL for adrenaline, 0.1 ng/mL for isoprenaline and 2.0 ng/mL for noradrenaline. The sampling frequency was calculated to be about 60/h. The selectivity of the method was good, because a series of common ions or excipients, such as K(+), Ba(2+), CO(3)(2-), NO(3)(-), SO(4)(2-), PO(4)(3-), sodium citrate, sodium bisulphite, oxidate dopamine, starch, lactose, carbamide and gelatin, could not produce interference when their concentrations were 1000-fold than those of dopamine. The present method was successfully applied to the determination of the four catecholamines in pharmaceutical injections.     

Sensitive determination of synephrine by flow-injection chemiluminescence.

It was found that light emission produced by the oxidation of luminol by potassium ferricyanide in basic medium was enhanced by synephrine, an anti-obesity drug. The optimum conditions for this chemiluminescent reaction were studied in detail in a flow injection system and employed in a new, simple and rapid method for the determination of synephrine. A mechanism for this reaction is proposed, based on the chemiluminescence reaction spectra. In the optimum conditions, CL intensity is proportional to concentration of synephrine in the 0.008-1 microg/mL range. The limit of detection is 1.6 ng/mL for synephrine (3sigma), and the relative standard deviation (n = 11) is 2.6% for 0.5 microg/mL synephrine. The method was applied to the determination of synephrine in herbal products, citrus fruit and biological fluids. The recoveries were satisfactory (90-102%). The results given by the proposed method are in good agreement with those given by HPLC-UV.     

A validated silver‐nanoparticle‐enhanced chemiluminescence method for the determination of citalopram in pharmaceutical preparations and human plasma

A simple and sensitive chemiluminescence (CL) method was developed for the determination of citalopram in pharmaceutical preparations and human plasma. The method is based on the enhancement of the weak CL signal of the luminol–H₂O₂ system. It was found that the CL signal arising from the reaction between alkaline luminol and H₂O₂ was greatly increased by the addition of silver nanoparticles in the presence of citalopram. Prepared silver nanoparticles (AgNPs) were characterized by UV–visible spectroscopy and transmission electron microscopy (TEM). Various experimental parameters affecting CL intensity were studied and optimized for the determination of citalopram. Under optimized experimental conditions, CL intensity was found to be proportional to the concentration of citalopram in the range 40–2500 ng/mL, with a correlation coefficient of 0.9997. The limit of detection (LOD) and limit of quantification (LOQ) of the devised method were 3.78 and 12.62 ng/mL, respectively. Furthermore, the developed method was found to have excellent reproducibility with a relative standard deviation (RSD) of 3.65% (n = 7). Potential interference by common excipients was also studied. The method was validated statistically using recovery studies and was successfully applied to the determination of citalopram in the pure form, in pharmaceutical preparations and in spiked human plasma samples. Percentage recoveries were found to range from 97.71 to 101.99% for the pure form, from 97.84 to 102.78% for pharmaceutical preparations and from 95.65 to 100.35% for spiked human plasma. Copyright © 2013 John Wiley & Sons, Ltd.     

Development of a novel chemiluminescence method for the determination of cefazolin sodium in injectable powder and human urine based on a luminol‐Cu(III) complex reaction in alkaline medium

A novel chemiluminescence (CL) method was developed for the determination of cefazolin sodium based on the CL reaction between the [Cu(HIO₆)₂]^5‐Cu(III) complex and luminol in alkaline solution. Results showed that CL emission of Cu(III) complex–luminol in alkaline medium was significantly different from that in acidic medium. A possible mechanism of the enhanced effect of cefazolin on CL emission of the [Cu(HIO₆)₂]^5‐‐ luminol system was proposed. The effect of the reaction conditions on CL emissions was examined. Under optimized conditions, a good linear relationship was obtained between CL intensity and concentrations of cefazolin sodium in the range of 2.0 x 10^‐8 to 2.0 x 10^‐6 g/mL with a correlation coefficient of R² = 0.9978. The limit of detection was 4.58 x 10^‐9 g/mL. The proposed method was applied for the determination of cefazolin sodium in real samples with recoveries of 82.0‐109% with an RSD of 0.7‐2.1%. The proposed method was successfully used for the determination of cefazolin sodium in injectable powder preparations and human urine with satisfactory results. Copyright © 2012 John Wiley & Sons, Ltd.     

Chemiluminescence of synephrine based on the cerium(IV)-rhodamine B system.

A new chemiluminescence (CL) method is described for the determination of synephrine. It is based on the reaction between synephrine and Ce(IV) in a nitric acid medium and measurement of the CL intensity produced by rhodamine B used as a luminophore, similar to luminol or lucigenin in basic media, instead of as a sensitizer. In the optimum conditions, the increase of CL intensity was correlated with synephrine concentration over the range 5.0 x 10(-9)-1.0 x 10(-6) g/mL with a detection limit of 1.0 x 10(-9) g/mL. The relative standard deviation (RSD) was 2.9% for 1.0 x 10(-7) g/mL synephrine (n = 11). The method was applied to the determination of a drug in herbal products, citrus fruit and biological samples, with satisfactory results. The results given by the proposed method are in good agreement with those given by HPLC-UV and UV spectrophotometry.     

In vitro monitoring sub-nanogram amounts analgin in human urine by its inhibitory of the luminol-periodate chemiluminescence reaction using reagent immobilization release technique

A selective and sensitive as well as rapid chemiluminescence (CL) flow sensor for the determination of analgin is described. The analytical reagents involved in chemiluminescence reaction, luminol and periodate, were both immobilized on an anion-exchange column. The CL signals produced by the reaction between luminol and periodate, which were eluted from the column through water injection, were decreased in the presence of analgin. Analgin was sensed by measuring the decrement of CL intensity, and which was observed linear over the logarithm of analgin concentration range of 0.1 to 50.0 ng mL(-1), and the limit of detection was 0.04 ng mL(-1) (3ó). At a flow rate of 2.0 mL min(-1), including sampling and washing, the detection could be performed in 0.5 min with a relative standard deviation of less than 3.0%. The proposed procedure was applied successfully in the monitoring of analgin in human urine samples without any pre-treatment process. It was found that the analgin concentration reached its maximum after being orally administrated for 4 h, and the analgin metabolism ratio in 10 h was 9.28% in the body of volunteers. The flow sensor offered reagentless procedures and remarkable stability in determination of analgin, and could be easily reused over 80 h.     

Reverse micelle-based chemiluminescence system for quinine sulphate.

A new chemiluminescence (CL) method is proposed for the determination of quinine sulphate, which is based on the dichloromethane solvent extraction of the ion-pair complex of tetrachloroaurate (III) with quinine sulphate, and luminol CL detection in a reversed micellar medium formed by the cation surfactant cetyltrimethylammonium bromide in a dichloromethane-cyclohexane (3:7, v/v)-water (0.35 mol/L Na2CO3 buffer solution, pH 11.5). The ion-pair complex of tetrachloroaurate (III) with quinine sulphate produced an analytical CL signal when it entered the reversed micellar water pool. In optimum conditions, CL intensities are proportional to the concentrations of the studied drug over the range 0.015-10 microg/mL, with a detection limit of 1.5 ng/mL. The relative standard deviation (RSD) is 1.38% for 2.5 microg/mL quinine sulphate (n=11). The method has been applied to the determination of the studied drug in biological fluids, with satisfactory results.     

Determination of sulpiride in pharmaceutical preparations and biological fluids using a Cr (III) enhanced chemiluminescence method

A highly sensitive and simple method for identifying sulpiride in pharmaceutical formulations and biological fluids is presented. The method is based on increased chemiluminescence (CL) intensity of a luminol–H₂O₂ system in response to the addition of Cr (III) under alkaline conditions. The CL intensity of the luminol–H₂O₂–Cr (III) system was greatly enhanced by the addition of sulpiride and the CL intensity was proportional to the concentration of sulpiride in a sample solution. Various parameters affecting the CL intensity were systematically investigated and optimized for determination of the sulpiride in a sample. Under the optimum conditions, the CL intensity was proportional to the concentration of sulpiride in the range of 0.068–4.0 µg/mL, with a good correlation coefficient of 0.997. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 8.50 × 10^‐6 µg/mL and 2.83 × 10^‐5 µg/mL, respectively. The method presented here produced good reproducibility with a relative standard deviation (RSD) of 2.70% (n = 7). The effects of common excipients and metal ions were studied for their interference effect. The method was validated statistically through recovery studies and successfully applied for the determination of sulpiride in pure form, pharmaceutical preparations and spiked human plasma samples. The percentage recoveries were found to range from 99.10 to 100.05% for pure form, 98.12 to 100.18% for pharmaceutical preparations and 97.9 to 101.4% for spiked human plasma. Copyright © 2012 John Wiley & Sons, Ltd.     

A novel HPLC-UV/nano-TiO2-chemiluminescence system for the determination of selenocystine and selenomethionine

Active oxygen species from the photocatalytic reaction in aqueous solution react with luminol to emit strong chemiluminescence (CL), and this can be inhibited by the UV decomposed-products of selenocystine (SeCys) or selenomethionine (SeMet). Based on this phenomenon, a novel hyphenated technique, HPLC-UV/nano-TiO(2)-CL, was established for the determination of SeCys and SeMet. The effects of pH, the UV irradiation time, the TiO(2) coated on the inner surface of the reaction tubing, and the Co(2+) catalyst concentration on the CL intensity and/or chromatographic resolution were systematically investigated. Under these optimized conditions, the inhibited CL intensity has a good linear relationship with the concentration of SeCys in the range of 0.04-10.6 microg mL(-1) or SeMet in the range of 0.05-12.4 microg mL(-1), with a limit of detection (S/N=3) of 6.4 microg L(-1) for SeCys or 12 microg L(-1) for SeMet. As an example, the method was preliminarily applied to the determination of the selenoamino acids in garlic and rabbit serum, with a recovery of 88-104%.     

An assay for inorganic mercury(II) based on its post-catalytic enhancement effect on the potassium permanganate-luminol system.

A strong chemiluminescence (CL) response is observed when potassium permanganate solution is injected into basic luminol solution. When the CL reaction terminates, subsequent injection of Hg2+ solution into the reaction mixture results in a new CL reaction. Based on the post-catalytic enhancement effect of Hg2+ on the potassium permanganate-luminol system in basic media, a fast and simple CL-coupled flow injection analysis for the determination of Hg2+ was developed. In optimum conditions, CL intensity is proportional to Hg2+ concentration over the range 1.0 x 10(-8)-1.0 x 10(-5) g/mL, with a detection limit of 2.0 x 10(-9) g/mL. The relative standard deviation (RSD) is 3.6% for 1.0 x 10(-7) g/mL Hg2+ (n = 11). After pretreatment with sulphydryl cotton fibre, environmental water samples were analysed by the proposed method for total mercury determination with satisfactory results. The results were in good agreement with those given by hydride generation-cold vapour atomic absorption spectrometry (HG-CVAAS).     

Electrogenerated chemiluminescence biosensor incorporating ruthenium complex-labelled Concanavalin A as a probe for the detection of Escherichia coli

The interaction of riboflavin with salmon sperm double-stranded DNA based on the decreasing of the oxidation signal of guanine and adenine bases was studied electrochemically with a pencil graphite electrode (PGE) using differential pulse voltammetry. The decrease in the intensity of the guanine and adenine oxidation signals after interaction with riboflavin was used as an indicator signals for the sensitive determination of riboflavin. Under the optimum conditions, a linear dependence of the guanine and adenine oxidation signals was observed for the riboflavin concentration in the range of 0.5-70 μg mL(-1) with a detection limit of 0.34 μg mL(-1) at ds-DNA modified PGE. The reproducibility and applicability of the analysis to pharmaceutical dosage forms and urine sample were also investigated. These results showed that this DNA biosensor could be used for the sensitive, rapid, simple and cost effective detection and determination of riboflavin-ds-DNA interaction. Pretreated pencil graphite electrode (PPGE) was also used for the determination of riboflavin by differential pulse adsorptive stripping voltammetry. With PPGE, a linear relationship was obtained for riboflavin over the concentration range of 0.003-0.88 μg mL(-1) with differential pulse adsorptive stripping voltammetric signal and with a detection limit of 0.076 ng mL(-1). Both determination methods were fully validated and applied for the analysis of riboflavin.     

A novel chemiluminescent flow‐injection analysis of transferrin by its reduction of the luminol—hydrogen peroxide reaction catalysed by meso‐tetra‐(3‐methoxyl‐4‐hydroxyl) phenyl manganese porphyrin

Based on the inhibition effect of transferrin (Tf) on the reaction of the luminol–hydrogen peroxide (H₂O₂) chemiluminescence (CL) system, catalysed by meso‐tetra‐(3‐methoxyl‐4‐hydroxyl) phenyl manganese porphyrin (MnP) as a mimetic enzyme of peroxides, a sensitive flow‐injection CL method has been developed for the determination of Tf in an alkaline medium. The CL reaction was carefully investigated by examining the variations of reaction conditions. Under optimum conditions, the linear range for the determination of transferrin was 0.04–20.0 μg/mL and the detection limit was 1.62 ng/mL. This proposed method was sensitive, convenient and simple, and has been successfully applied to the determination of transferrin in a serum sample. Copyright © 2011 John Wiley & Sons, Ltd.     

Ultrasensitive assay of clindamycin in medicine and bio-fluids with chemiluminescence detection.

A simple chemiluminescence (CL) method using flow injection has been developed for the determination of clindamycin, based on the inhibitory effect of clindamycin on the CL generated from the luminol-K(3)Fe(CN)(6) system in alkaline medium. It was found that the decrement of CL intensity was linear with the logarithm of clindamycin concentration over the range 0.7-1000 ng/mL. The detection limit was 0.2 ng/mL with a relative standard deviation (RSD) of <5.0% (n = 7). At a flow rate of 3.0 mL/min, a complete analytical process could be performed within 0.5 min, including sampling and washing. The proposed procedure was applied successfully to the determination of clindamycin in pharmaceutical preparations and human urine without pretreatment.