Mixotrophic and photoautotrophic cultivation of 14 microalgae isolates from Saskatchewan, Canada: potential applications for wastewater remediation for biofuel production

Northern regions are generally viewed as unsuitable for microalgal biofuel production due to unfavorable climate and solar insolation levels. However, these conditions can potentially be mitigated by coupling microalgal cultivation to industrial processes such as wastewater treatment. In this study, we have examined the biomass and lipid productivity characteristics of 14 microalgae isolates (Chlorophyta) from the Canadian province of Saskatchewan. Under both photoautotrophic and mixotrophic cultivation, a distinct linear trend was observed between biomass and lipid productivities in the 14 SK isolates. The most productive strain under cultivation in TAP media was Scenedesmus sp.-AMDD which displayed rates of biomass and fatty acid productivities of 80 and 30.7?mg?L^?1?day^?1, respectively. The most productive strain in B3NV media was Chlamydomonas debaryana-AMLs1b which displayed rates of biomass and fatty acid productivities of 51.7 and 5.9?mg?L^?1?day^?1, respectively. In 11 of the isolates tested, secondary municipal wastewater (MCWW) supported rates of biomass productivity between 21 and 33?mg?L^?1?day^?1 with Scenedesmus sp.-AMDD being the most productive. Three strains, Chlamydomonas debaryana-AMB1, Chlorella sorokiniana-RBD8 and Micractinium sp.-RB1b, showed large increases in biomass productivity when cultivated mixotrophically in MCWW supplemented with glycerol. High relative oleic acid content was detected in 10 of the 14 isolates when grown mixotrophically in media supplemented with acetate. There was no detectable effect on the fatty acid profiles in cells cultivated mixotrophically in glycerol-supplemented MCWW. These data indicate that biomass and lipid productivities are boosted by mixotrophic cultivation. Exploiting this response in municipal wastewater is a promising strategy for the production of environmentally sustainable biofuels.     

Scenedesmus sp. NJ-1 isolated from Antarctica: a suitable renewable lipid source for biodiesel production

Microalgal lipids are promising alternative feedstocks for biodiesel production. Scenedesmus sp. NJ-1, an oil-rich freshwater microalga isolated from Antarctica, was identified to be a suitable candidate to produce biodiesel in this study. This strain could grow at temperatures ranging from 4 to 35?°C. With regular decrease in nitrate concentration in the medium, large quantities of triacylglycerols accumulated under batch culture conditions detected by thin layer chromatography and BODIPY 505/515 fluorescent staining. Scenedesmus sp. NJ-1 achieved the average biomass productivity of 0.105?g?l^?1?d^?1 (dry weight) and nearly the highest lipid content (35?% of dry cell weight) was reached at day 28 in the batch culture. Neutral lipids accounted for 78?% of total lipids, and C18:1 (n-9), C16:0 were the major fatty acids in total lipids, composing 37 and 20?% of total fatty acids of Scenedesmus sp. NJ-1 grown for 36?days, respectively. These results suggested that Scenedesmus sp. NJ-1 was a good source of microalgal oils for biodiesel production.     

Lipid productivity and fatty acid composition in Chlorella and Scenepdesmus strains grown in nitrogen-stressed conditions

Thirty Chlorella and 30 Scenedesmus strains grown in nitrogen-stressed conditions (70 mg L^?1 N) were analyzed for biomass accumulation, lipid productivity, protein, and fatty acid (FA) composition. Scenedesmus strains produced more biomass (4.02?±?0.73 g L^?1) after 14 days in culture compared to Chlorella strains (2.57?±?0.12 g L^?1). Protein content decreased and lipid content increased from days 8 to 14 with an increase in triacylglycerol (TAG) accumulation in most strains. By day 14, Scenedesmus strains generally had higher lipid productivity (53.5?±?3.7 mg lipid L^?1 day^?1) than Chlorella strains (35.1?±?2.8 mg lipid L^?1 day^?1) with the lipids consisting mainly of C16–18 TAGs. Scenedesmus strains generally had a more suitable FA profile with higher amounts of saturated fatty acids and monounsaturated fatty acids (MUFAs) and a smaller polyunsaturated fatty acid (PUFA) component. Chlorella strains had a larger PUFA component and smaller MUFA component. The general trend in the FA composition of Chlorella strains was oleic > palmitic > α-linolenic = linoleic > eicosenoic > heptadecenoic > stearic acid. For Scenedesmus strains, the general trend was oleic > palmitic > linoleic > α-linolenic > stearic > eicosenoic > palmitoleic > heptadecenoic acid. The most promising strains with the highest lipid productivity and most suitable FA profiles were Scenedesmus sp. MACC 401, Scenedesmus soli MACC 721, and Scenedesmus ecornis MACC 714. Although Chlorella sp. MACC 519 had lower lipid productivity, the FA profile was good with a lower PUFA component compared to the other Chlorella strains analyzed and a low linolenic acid concentration.     

Maximizing the productivity of the microalgae <Emphasis Type="Italic">Scenedesmus</Emphasis> AMDD cultivated in a continuous photobioreactor using an online flow rate control

In this study, production of the microalga Scenedesmus AMDD in a 300 L continuous flow photobioreactor was maximized using an online flow (dilution rate) control algorithm. To enable online control, biomass concentration was estimated in real time by measuring chlorophyll-related culture fluorescence. A simple microalgae growth model was developed and used to solve the optimization problem aimed at maximizing the photobioreactor productivity. When optimally controlled, Scenedesmus AMDD culture demonstrated an average volumetric biomass productivity of 0.11 g L^?1 d^?1 over a 25 day cultivation period, equivalent to a 70 % performance improvement compared to the same photobioreactor operated as a turbidostat. The proposed approach for optimizing photobioreactor flow can be adapted to a broad range of microalgae cultivation systems.     

Effect of mixed carbon substrate on exopolysaccharide production of cyanobacterium Nostoc flagelliforme in mixotrophic cultures

The effects of organic carbon sources on cell growth and exopolysaccharide (EPS) production of dissociated Nostoc flagelliforme cells under mixotrophic batch culture were investigated. After 7?days of cultivation, glycerol, acetate, sucrose, and glucose increased the final cell density and final EPS concentrations, and mixotrophic growth achieved higher biomass concentrations. The increase in cell growth was particularly high when glucose was added as the sole carbon source. On the other hand, EPS production per dry cell weight was significantly enhanced by adding acetate. For more effective EPS production, the effects of the mixture of glucose and acetate were investigated. Increasing the ratio of glucose to acetate resulted in higher growth rate with BG-11 medium and higher EPS productivity with BG-11₀ medium (without NaNO₃). When the medium was supplemented with a mixture of glucose (4.0?g?L^?1) and acetate (2.0?g?L^?1), 1.79?g?L^?1 biomass with BG-11 medium and 879.6?mg?L^?1 of EPS production with BG-11₀ medium were achieved. Adopting this optimal ratio of glucose to acetate established in flask culture, the culture was also conducted in a 20-L photobioreactor with BG-11 medium for 7?days. A maximum biomass of 2.32?g?L^?1 was achieved, and the EPS production was 634.6?mg?L^?1.     

Toxicity, transformation and accumulation of inorganic arsenic species in a microalga Scenedesmus sp. isolated from soil

Arsenic speciation and cycling in the natural environment are highly impacted via biological processes. Since arsenic is ubiquitous in the environment, microorganisms have developed resistance mechanisms and detoxification pathways to overcome the arsenic toxicity. This study has evaluated the toxicity, transformation and accumulation of arsenic in a soil microalga Scenedesmus sp. The alga showed high tolerance to arsenite. The 72-h 50 % growth inhibitory concentrations (IC₅₀ values) of the alga exposed to arsenite and arsenate in low-phosphate growth medium were 196.5 and 20.6 mg? L^?1, respectively. When treated with up to 7.5 mg? L^?1 arsenite, Scenedesmus sp. oxidised all arsenite to arsenate in solution. However, only 50 % of the total arsenic remained in the solution while the rest was accumulated in the cells. Thus, this alga has accumulated arsenic as much as 606 and 761 μg? g^?1 dry weight when exposed to 750 μg? L^?1 arsenite and arsenate, respectively, for 8 days. To our knowledge, this is the first report of biotransformation of arsenic by a soil alga. The ability of this alga to oxidise arsenite and accumulate arsenic could be used in bioremediation of arsenic from contaminated water and soil.     

Lipid productivity, settling potential and fatty acid profile of 11 microalgal species grown under nitrogen replete and limited conditions

Microalgae are a promising alternative source of oil for biodiesel production. Identification of a species with desirable characteristics is a key component towards achieving economic feasibility for the process. This has been compromised by a lack of data allowing effective interspecies comparison. Eleven species of microalgae, selected on the basis of available literature data, were tested for lipid productivity, gravity sedimentation and the suitability of their fatty acid profiles for biodiesel production. The response to nitrogen limitation was species-specific. Lipid yields and productivity were higher at 150?mg?L^?1 nitrate than at 1,500?mg?L^?1 for all species tested except Spirulina platensis. The Chlorophyta, particularly Chlorella vulgaris and Scenedesmus, had the highest growth rates and showed the greatest increase in lipid content in response to nitrogen limitation. Cylindrotheca fusiformis, S. platensis, Scenedesmus and Tetraselmis suecica had the fastest settling rates and highest biomass recoveries after 24?h of gravity sedimentation. For most species, the fuel would need to be blended or culture conditions to be optimised to achieve the correct lipid profile in order for microalgal fuel to meet the European standards for biodiesel production (EN 14214). The most promising species overall were the freshwater algae Scenedesmus and C. vulgaris and the marine algae C. fusiformis and Nannochloropsis.     

Euglena sp. as a suitable source of lipids for potential use as biofuel and sustainable wastewater treatment

Prolific algal growth in sewage ponds with high organic loads in the tropical regions can provide cost-effective and efficient wastewater treatment and biofuel production. This work examines the ability of Euglena sp. growing in wastewater ponds for biofuel production and treatment of wastewater. The algae were isolated from the sewage treatment plants and were tested for their nutrient removal capability. Compared to other algae, Euglena sp. showed faster growth rates with high biomass density at elevated concentrations of ammonium nitrogen (NH₄-N) and organic carbon (C). Profuse growth of these species was observed in untreated wastewaters with a mean specific growth rate (μ) of 0.28 day^?1 and biomass productivities of 132 mg ?L^?1? day^?1. The algae cultured within a short period of 8 days resulted in the 98 % removal of NH₄-N, 93 % of total nitrogen 85 % of ortho-phosphate, 66 % of total phosphate and 92 % total organic carbon. Euglenoids achieved a maximum lipid content of 24.6 % (w/w) with a biomass density of 1.24 g ?L^?1 (dry wt.). Fourier transform infrared spectra showed clear transitions in biochemical compositions with increased lipid/protein ratio at the end of the culture. Gas chromatography and mass spectrometry indicated the presence of high contents of palmitic, linolenic and linoleic acids (46, 23 and 22 %, respectively), adding to the biodiesel quality. Good lipid content (comprised quality fatty acids), efficient nutrient uptake and profuse biomass productivity make the Euglena sp. as a viable source for biofuel production in wastewaters.     

<Emphasis Type="Italic">Chlorella vulgaris</Emphasis> (SAG 211-12) biofilm formation capacity and proposal of a rotating flat plate photobioreactor for more sustainable biomass production

Difficulties and cost of suspended microalgal biomass harvest and processing can be overcome by cultivating microalgae as biofilms. In the present work, a new photoautotrophic biofilm photobioreactor, the rotating flat plate photobioreactor (RFPPB), was developed aiming at a cost-effective production of Chlorella vulgaris (SAG 211-12), a strain not frequently referred in the literature but promising for biofuel production. Protocols were developed for evaluating initial adhesion to different materials and testing the conditions for biofilm formation. Polyvinyl chloride substrate promoted higher adhesion and biofilm production, followed by polypropylene, polyethylene, and stainless steel. The new RFPPB was tested, aiming at optimizing incident light utilization, minimizing footprint area and simplifying biomass harvesting. Tests show that the photobioreactor is robust, promotes biofilm development, and has simple operation, small footprint, and easy biomass harvest. Biomass production (dry weight) under non-optimized conditions was 3.35 g m^?2, and areal productivity was 2.99 g m^?2 day^?1. Lipid content was 10.3% (dw), with high PUFA content. These results are promising and can be improved by optimizing some operational parameters, together with evaluation of long-term photobioreactor maximum productivity.     

Effect of initial biomass density on growth and astaxanthin production of Haematococcus pluvialis in an outdoor photobioreactor

Initial biomass density (IBD) is an important factor that affects the viability and productivity of microalgae particularly when sunlight is used for photosynthesis. In this paper, the effect of IBD on photosynthesis, growth, and astaxanthin production of the green microalga Haematococcus pluvialis during the astaxanthin induction stage was studied in a glass column photobioreactor during different seasons. Of seven IBDs, i.e., 0.1, 0.5, 0.8, 1.5, 2.7, 3.5, and 5.0 g L^?1 tested, 0.8 g L^?1 IBD was optimal and resulted in the highest astaxanthin productivity of 17.1 mg L^?1 day^?1. Severe photoinhibition of photosynthesis occurred at low IBD (e.g., 0.1 g L^?1) cultures, especially in the winter, and severe light limitation to individual cells in high IBD cultures (>2.7 g L^?1) were responsible for reduced astaxanthin production. This was the first report quantitatively assessing IBD as the key limiting factor for astaxanthin production in H. pluvialis outdoor cultivation.     

Echinenone production of a dark red-coloured strain of Botryococcus braunii

Echinenone has been used as an edible orange pigment, antioxidant and provitamin A. An echinenone-accumulating strain, BOT-20, of Botryococcus braunii was isolated from freshwater environments in Japan. The B. braunii BOT-20 strain is different from other strains of B. braunii, as it appeared dark red during its growth in the laboratory culture as opposed to green. The biomass of the strain was 1.9?g?L^?1 at 1?month after cultivation. The n-hexane/acetone (3:1, v/v) extract of the strain was 45.5% of the dry biomass weight and consisted of carotenoids (92%, of which 73% was echinenone) and hydrocarbons (8%). The echinenone content was 30.5% of the dry biomass weight, and production was 630?mg?L^?1. Hydrocarbons comprised only 3.7% of the total dry biomass weight. The main component of hydrocarbon was an analogue of botryococene by ¹H and ¹³C NMR. With high values of echinenone content and production, the B. braunii strain BOT-20 is expected to be a new bioresource for the commercial production of echinenone.     

Low-cost cultivation of <Emphasis Type="Italic">Scenedesmus</Emphasis> sp. with filtered anaerobically digested piggery wastewater: biofuel production and pollutant remediation

A laboratory study was conducted on biomass and lipid production by Scenedesmus sp. and the removal of total nitrogen (TN) and total phosphorus (TP) from filtered anaerobically digested piggery wastewater. The dry weight (DW), lipid content and productivity, total nitrogen, and total phosphorus removal rate were assessed in five media: modified soil extract (MSE) medium, 5 % anaerobic digested wastewater (ADWW), 10 % ADWW, 15 % ADWW, and 5 % ADWW supplemented with NaNO₃. The highest biomass productivity appeared in the 15 % ADWW group, which was 20.4 % higher than MSE group. The highest lipid content was found in the 5 % ADWW group (31.60 %), while the highest lipid productivity was in the 10 % ADWW group (27.01 mg L^?1 day^?1). Compared with the 5 % ADWW group, the 5 % ADWW group supplemented with NaNO₃ had a similar biomass amount but lower lipid content and productivity. The fatty acids percentage of Scenedesmus sp. showed a slight difference in different media, but with the four dominant fatty acids (C16:0, C18:1, C18:2, C18:3) accounting for 87 % of the total fatty acids, suggests that Scenedesmus sp. in ADWW medium was no different than MSE in terms of lipid composition and content. TN removal rates were 82.85, 82.51, 85.85, 91.28, and 78.71 % in groups 1 to 5, and TP removal rates were 53.05, 88.53, 87.77, 88.72, and 80.64 %. Our experiment also shows the feasibility of using ADWW as a substitute of all the elements of MSE medium except for carbon, which would significantly reduce the costs of microalgal culture.     

Phycoremediation of dairy and winery wastewater using <Emphasis Type="Italic">Diplosphaera</Emphasis> sp. MM1

A new green microalgal species was isolated, identified and investigated for its biomass production and nutrient removal efficiency in dairy and winery wastewater in this study. The 18S rRNA-based phylogenetic analysis revealed that this new strain is a Diplosphaera sp. and was designated strain MM1. The growth of this strain was evaluated in different diluted dairy and winery wastewaters. The highest algal biomass production (up to 2.3 g L^?1) was obtained in dairy wastewater (D3; dairy wastewater 1:2 deionised water) after 14 days of culture. However, for winery wastewater, the highest algal biomass production (up to 1.46 g L^?1) was obtained in wastewater combination W2 (winery wastewater 1:1 deionised water) after 14 days of culture. Turbid dairy wastewater with high concentration of nitrogen and phosphorous slowed down the initial growth of the alga. However, at the end of day 14, biomass production was nearly twofold higher than that of winery wastewater. The findings from both types of wastewater suggest that Diplosphaera sp. MM1 has potential for its application in generating biomass with simultaneous remediation of nutrient-rich wastewater.     

Biomass and Lipid Production of Dinoflagellates and Raphidophytes in Indoor and Outdoor Photobioreactors

The principal fatty acids from the lipid profiles of two autochthonous dinoflagellates (Alexandrium minutum and Karlodinium veneficum) and one raphidophyte (Heterosigma akashiwo) maintained in bubble column photobioreactors under outdoor culture conditions are described for the first time. The biomass production, lipid content and lipid productivity of these three species were determined and the results compared to those obtained when the strains were cultured indoors. Under the latter condition, the biotic values did not significantly differ among species, whereas under outdoor conditions, differences in both duplication time and fatty acids content were observed. Specifically, A. minutum had higher biomass productivity (0.35 g·L^?1 day^?1), lipid productivity (80.7 mg lipid·L^?1 day^?1) and lipid concentration (252 mg lipid·L^?1) at harvest time (stationary phase) in outdoor conditions. In all three strains, the growth rate and physiological response to the light and temperature fluctuations of outdoor conditions greatly impacted the production parameters. Nonetheless, the species could be successfully grown in an outdoor photobioreactor and were of sufficient robustness to enable the establishment of long-term cultures yielding consistent biomass and lipid production.     

Triacylglycerol content,productivity and fatty acid profile in Scenedesmus acutus PVUW12

A detailed lipid characterization of Scenedesmus acutus PVUW12, with emphasis on the evaluation of triacylglycerols (TAGs) as a biodiesel feedstock, is presented. When algal cells were grown in nitrogen-free medium (N stress), a lipid increase was detected that was mainly due to TAG accumulation. In situ fluorescence measurements allowed the kinetics and extent of neutral lipid accumulation to be followed. Under N stress, the productivity of total lipids and TAGs increased significantly (80.99 and 63.74 mg L^?1 day^?1, respectively) compared with controls (29.51 and 16.23 mg L^?1 day^?1, respectively). Monounsaturated fatty acids were the major fraction and increased further (49.74 %) in stressed cells, with oleic acid as the most abundant compound (46.97 %). The polyunsaturated fatty acid composition of this algal oil appears to meet the European Standard EN 14214. These results indicate that S. acutus oil meets the requirements for its use as a biodiesel feedstock. Since this strain was also proposed for wastewater bioremediation, this opens up the possibility of its use in an integrated system combined with biofuel production.     

<Emphasis Type="Italic">Tetraselmis suecica</Emphasis> culture for CO<Subscript>2</Subscript> bioremediation of untreated flue gas from a coal-fired power station

The accumulation of atmospheric CO₂, primarily due to combustion of fossil fuels, has been implicated in potential global climate change. The high rate of CO₂ bioremediation by microalgae has emerged as a favourable method for reducing coal-fired power plant emissions. However, coal-fired power station flue gas contains other chemicals such as SO_x which can inhibit microalgal growth. In the current study, the effect of untreated flue gas as a source of inorganic carbon on the growth of Tetraselmis in a 1000 L industrial-scale split-cylinder internal-loop airlift photobioreactor was examined. The culture medium was recycled after each harvest. Tetraselmis suecica grew very well in this airlift photobioreactor during the 7-month experiment using recycled medium from an electroflocculation harvesting unit. Increased medium SO₄ ^2? concentration as high as 870 mg SO₄ ^2??L^?1 due to flue gas addition and media recycling had no negative effect on the overall growth and productivity of this alga. The potential organic biomass productivity and carbon sequestration using an industrial-scale airlift PBR at International Power Hazelwood, Gippsland, Victoria, Australia, are 178.9?±?30 mg L^?1 day^?1 and 89.15?±?20 mg?‘C’?L^?1 day^?1, respectively. This study clearly indicates the potential of growing Tetraselmis on untreated flue gas and using recycled medium for the purpose of biofuel and CO₂ bioremediation.     

Photoautotrophic Production of Lipids by Some <Emphasis Type="Italic">Chlorella</Emphasis> Strains

The microalgae Chlorella protothecoides UTEX 25, Chlorella sp. TISTR 8991, and Chlorella sp. TISTR 8990 were compared for use in the production of biomass and lipids under photoautotrophic conditions. Chlorella sp. TISTR 8990 was shown to be potentially suitable for lipid production at 30°C in a culture medium that contained only inorganic salts. For Chlorella sp. TISTR 8990 in optimal conditions in a stirred tank photobioreactor, the lipid productivity was 2.3 mg L⁻¹ h⁻¹ and after 14 days the biomass contained more than 30% lipids by dry weight. To attain this, the nitrogen was provided as KNO₃ at an initial concentration of 2.05 g L⁻¹ and chelated ferric iron was added at a concentration of 1.2 × 10⁻⁵ mol L⁻¹ on the ninth day. Under the same conditions in culture tubes (36 mm outer diameter), the biomass productivity was 2.8-fold greater than in the photobioreactor (0.125 m in diameter), but the lipid productivity was only 1.2-fold higher. Thus, the average low-light level in the photobioreactor actually increased the biomass specific lipid production compared to the culture tubes. A light-limited growth model closely agreed with the experimental profiles of biomass production, nitrogen consumption, and lipid production in the photobioreactor.     

Lipid and total fatty acid productivity in photoautotrophic fresh water microalgae: screening studies towards biodiesel production

Microalgae are considered as a promising feedstock for biomass production. The selection of the most suitable species is based on several key parameters such as lipid and fatty acid productivity. In the present study, the growth of different microalgae strains was examined in freshwater media for photoautotrophs suited for large-scale applications to identify the most suitable medium for each species. In the optimal medium, Scenedesmus obliquus showed the highest biomass productivity measured as increase of cell dry weight (0.25 g cellu dry weight (CDW) L^?1 day^?1), while Botryococcus braunii showed the highest lipid and total fatty acid content (430 and 270 mg g^?1 CDW, respectively) among the tested species. Regarding lipid and total fatty acid productivity, S. obliquus was the most lipid and total fatty acid productive strain with 41 and 18 mg L^?1 day^?1 during the exponential phase, respectively. Additionally, the proportion of saturated and monounsaturated fatty acids increased with duration of the incubation in S. obliquus, while polyunsaturated fatty acids decreased. These results nominate S. obliquus as a promising microalga in order to serve as a feedstock for renewable energy production.     

Productivity of Chlorella sorokiniana in a short light‐path (SLP) panel photobioreactor under high irradiance

Maximal productivity of a 14 mm light‐path panel photobioreactor under high irradiance was determined. Under continuous illumination of 2,100 µmol photons m^?2 s^?1 with red light emitting diodes (LEDs) the effect of dilution rate on photobioreactor productivity was studied. The light intensity used in this work is similar to the maximal irradiance on a horizontal surface at latitudes lower than 37°. Chlorella sorokiniana, a fast‐growing green microalga, was used as a reference strain in this study. The dilution rate was varied from 0.06 to 0.26 h^?1. The maximal productivity was reached at a dilution rate of 0.24 h^?1, with a value of 7.7 g dw m^?2 h^?1 (m² of illuminated photobioreactor surface) and a volumetric productivity of 0.5 g dw L^?1 h^?1. At this dilution rate the biomass concentration inside the reactor was 2.1 g L^?1 and the photosynthetic efficiency was 1.0 g dw mol photons. This biomass yield on light energy is high but still lower than the theoretical maximal yield of 1.8 g mol photons^?1 which must be related to photosaturation and thermal dissipation of absorbed light energy. Biotechnol. Bioeng. 2009; 104: 352–359 © 2009 Wiley Periodicals, Inc.     

Effects of initial population density (IPD) on growth and lipid composition of Nannochloropsis sp.

The microalga Nannochloropsis sp. was cultured under different initial population densities (IPDs) ranging from 0.11 to 9.09 g L^?1. The IPD affected the biomass and lipid accumulation significantly. The algal cultured with higher IPD resulted higher biomass concentration (up to 13.07 g L^?1) in 10 days growth. The biomass productivity with 0.98 g L^?1 IPD was 0.75 g L^?1 d^?1 which was higher than that of other IPDs. For IPDs ranging from 0.11 to 0.98 g L^?1, with the increase of IPD, the biomass productivity increased, while for IPD over 0.98 g L^?1, the biomass productivity decreased. Lipid content of the algal culture started with 0.11 g L^?1 IPD reached to 42 % of dry weight. But with the increase of IPD, the lipid content decreased. Lipid composition was analyzed using thin layer chromatography coupled with flame ionization detection (TLC/FID). Seven lipid classes were identified and quantified. The main reserve lipid, triacylglyceride (TAG), accumulated under all different IPD conditions. However, with the increasing IPD values, TAG content decreased from 59.1 to 23.5 % of the total lipids. Based on these results, to obtain the maximal biomass productivity and lipid productivity of Nannochloropsis sp. in mass cultivation systems, it is necessary to select an appropriate IPD.