共查询到20条相似文献,搜索用时 15 毫秒
1.
James J. H. St Clair Barbara C. Klump Jessica E. M. van der Wal Shoko Sugasawa Christian Rutz 《Biological journal of the Linnean Society. Linnean Society of London》2016,118(2):226-232
Functional tool use requires the selection of appropriate raw materials. New Caledonian crows Corvus moneduloides are known for their extraordinary tool‐making behaviour, including the crafting of hooked stick tools from branched vegetation. We describe a surprisingly strong between‐site difference in the plant materials used by wild crows to manufacture these tools: crows at one study site use branches of the non‐native shrub Desmanthus virgatus, whereas only approximately 7 km away, birds apparently ignore this material in favour of the terminal twigs of an as‐yet‐unidentified tree species. Although it is likely that differences in local plant communities drive this striking pattern, it remains to be determined how and why crows develop such strong site‐specific preferences for certain raw materials. 相似文献
2.
Many animals use tools but only humans are generally considered to have the cognitive sophistication required for cumulative technological evolution. Three important characteristics of cumulative technological evolution are: (i) the diversification of tool design; (ii) cumulative change; and (iii) high-fidelity social transmission. We present evidence that crows have diversified and cumulatively changed the design of their pandanus tools. In 2000 we carried out an intensive survey in New Caledonia to establish the geographical variation in the manufacture of these tools. We documented the shapes of 5550 tools from 21 sites throughout the range of pandanus tool manufacture. We found three distinct pandanus tool designs: wide tools, narrow tools and stepped tools. The lack of ecological correlates of the three tool designs and their different, continuous and overlapping geographical distributions make it unlikely that they evolved independently. The similarities in the manufacture method of each design further suggest that pandanus tools have gone through a process of cumulative change from a common historical origin. We propose a plausible scenario for this rudimentary cumulative evolution. 相似文献
3.
Background
New Caledonian crows use a range of foraging tools, and are the only non-human species known to craft hooks. Based on a small number of observations, their manufacture of hooked stick tools has previously been described as a complex, multi-stage process. Tool behaviour is shaped by genetic predispositions, individual and social learning, and/or ecological influences, but disentangling the relative contributions of these factors remains a major research challenge. The properties of raw materials are an obvious, but largely overlooked, source of variation in tool-manufacture behaviour. We conducted experiments with wild-caught New Caledonian crows, to assess variation in their hooked stick tool making, and to investigate how raw-material properties affect the manufacture process.Results
In Experiment 1, we showed that New Caledonian crows’ manufacture of hooked stick tools can be much more variable than previously thought (85 tools by 18 subjects), and can involve two newly-discovered behaviours: ‘pulling’ for detaching stems and bending of the tool shaft. Crows’ tool manufactures varied significantly: in the number of different action types employed; in the time spent processing the hook and bending the tool shaft; and in the structure of processing sequences. In Experiment 2, we examined the interaction of crows with raw materials of different properties, using a novel paradigm that enabled us to determine subjects’ rank-ordered preferences (42 tools by 7 subjects). Plant properties influenced: the order in which crows selected stems; whether a hooked tool was manufactured; the time required to release a basic tool; and, possibly, the release technique, the number of behavioural actions, and aspects of processing behaviour. Results from Experiment 2 suggested that at least part of the natural behavioural variation observed in Experiment 1 is due to the effect of raw-material properties.Conclusions
Our discovery of novel manufacture behaviours indicates a plausible scenario for the evolutionary origins, and gradual refinement, of New Caledonian crows’ hooked stick tool making. Furthermore, our experimental demonstration of a link between raw-material properties and aspects of tool manufacture provides an alternative hypothesis for explaining regional differences in tool behaviours observed in New Caledonian crows, and some primate species.4.
AbstractCumulative technological evolution has been suggested to explain the existence of different pandanus tool designs manufactured by New Caledonian crows. Circumstantial evidence from the distribution of the three tool designs that they manufacture suggests transmission of the designs probably involves accurate social learning, a characteristic considered essential for the cumulative evolution of tools. Recently, Kenward et al. (2005) reported that four hand‐raised crows developed basic stick tool use without social learning. This finding cast doubt on the importance of social learning in the evolution of crows’ pandanus tools in the wild. Here, we report that a naïve male crow at Parc Zoo‐Forestier, Nouméa, developed proficient stick tool use without social input in 2002. In 2004, four captive crows, including the naïve male, that were inexperienced with pandanus material were given an opportunity to use and/or manufacture pandanus tools. Only two of the four birds used the tools but none manufactured tools. Our preliminary findings and the work with the four hand‐raised crows keep open the possibility that the evolution of crows’ pandanus tool designs is based on social learning. We propose that social learning and a disposition to develop basic tool use without social input are both essential cognitive requirements for cumulative technological evolution. 相似文献
5.
New Caledonian crows are renowned for their unusually sophisticated tool behaviour. Despite decades of fieldwork, however, very little is known about how they make and use their foraging tools in the wild, which is largely owing to the difficulties in observing these shy forest birds. To obtain first estimates of activity budgets, as well as close-up observations of tool-assisted foraging, we equipped 19 wild crows with self-developed miniature video cameras, yielding more than 10 h of analysable video footage for 10 subjects. While only four crows used tools during recording sessions, they did so extensively: across all 10 birds, we conservatively estimate that tool-related behaviour occurred in 3% of total observation time, and accounted for 19% of all foraging behaviour. Our video-loggers provided first footage of crows manufacturing, and using, one of their most complex tool types—hooked stick tools—under completely natural foraging conditions. We recorded manufacture from live branches of paperbark (Melaleuca sp.) and another tree species (thought to be Acacia spirorbis), and deployment of tools in a range of contexts, including on the forest floor. Taken together, our video recordings reveal an ‘expanded’ foraging niche for hooked stick tools, and highlight more generally how crows routinely switch between tool- and bill-assisted foraging. 相似文献
6.
W. C. McGrew 《Philosophical transactions of the Royal Society of London. Series B, Biological sciences》2013,368(1630)
The chimpanzee (Pan troglodytes) is well-known in both nature and captivity as an impressive maker and user of tools, but recently the New Caledonian crow (Corvus moneduloides) has been championed as being equivalent or superior to the ape in elementary technology. I systematically compare the two taxa, going beyond simple presence/absence scoring of tool-using and -making types, on four more precise aspects of material culture: (i) types of associative technology (tools used in combination); (ii) modes of tool making; (iii) modes of tool use; and (iv) functions of tool use. I emphasize tool use in nature, when performance is habitual or customary, rather than in anecdotal or idiosyncratic. On all four measures, the ape shows more variety than does the corvid, especially in modes and functions that go beyond extractive foraging. However, more sustained field research is required on the crows before this contrast is conclusive. 相似文献
7.
ABSTRACT: BACKGROUND: Crows and ravens (Passeriformes: Corvus) are large-brained birds with enhanced cognitive abilities relative to other birds. They are among the few non-hominid organisms on Earth to be considered intelligent and well-known examples exist of several crow species having evolved innovative strategies and even use of tools in their search for food. The 40 Corvus species have also been successful dispersers and are distributed on most continents and in remote archipelagos. RESULTS: This study presents the first molecular phylogeny including all species and a number of subspecies within the genus Corvus. We date the phylogeny and determine ancestral areas to investigate historical biogeographical patterns of the crows. Additionally, we use data on brain size and a large database on innovative behaviour and tool use to test whether brain size (i) explains innovative behaviour and success in applying tools when foraging and (ii) has some correlative role in the success of colonization of islands. Our results demonstrate that crows originated in the Palaearctic in the Miocene from where they dispersed to North America and the Caribbean, Africa and Australasia. We find that relative brain size alone does not explain tool use, innovative feeding strategies and dispersal success within crows. CONCLUSIONS: Our study supports monophyly of the genus Corvus and further demonstrates the direction and timing of colonization from the area of origin in the Palaearctic to other continents and archipelagos. The Caribbean was probably colonized from North America, although some North American ancestor may have gone extinct, and the Pacific was colonized multiple times from Asia and Australia. We did not find a correlation between relative brain size, tool use, innovative feeding strategies and dispersal success. Hence, we propose that all crows and ravens have relatively large brains compared to other birds and thus the potential to be innovative if conditions and circumstances are right. 相似文献
8.
Neoglycoconjugates are useful tools to study carbohydrate/protein interactions. In order to discover new lectins, to define their fine specificity or to study their intracellular trafficking, there is a need for neoglycoconjugates containing complex oligosaccharides. We recently set up a simple way to transform native oligosaccharides into glycosynthons. The present paper describes i[emsp4 ]) the synthesis of such glycosynthons starting with sialylated oligosides, ii[emsp4 ]) the preparation of sialylated neoglycoproteins and iii[emsp4 ]) their binding to sialic acid-specific lectins assessed by surface plasmon resonance experiments. 相似文献
9.
Molecular tools for breeding basidiomycetes. 总被引:1,自引:0,他引:1
The industrial production of edible basidiomycetes is increasing every year as a response to the increasing public demand of them because of their nutritional properties. About a dozen of fungal species can be currently produced for food with sound industrial and economic bases. Notwithstanding, this production is threatened by biotic and abiotic factors that make it necessary to improve the fungal strains currently used in industry. Breeding of edible basidiomycetes, however, has been mainly empirical and slow since the genetic tools useful in the selection of the new genetic material to be introduced in the commercial strains have not been developed for these fungi as it was for other organisms. In this review we will discuss the main genetic factors that should be considered to develop breeding approaches and tools for higher basidiomycetes. These factors are (i) the genetic system controlling fungal mating; (ii) the genomic structure and organisation of these fungi; and (iii) the identification of genes involved in the control of quantitative traits. We will discuss the weight of these factors using the oyster mushroom Pleurotus ostreatus as a model organism for most of the edible fungi cultivated industrially. 相似文献
10.
The Oldowan Industrial Complex has long been thought to have been static, with limited internal variability, embracing techno-complexes essentially focused on small-to-medium flake production. The flakes were rarely modified by retouch to produce small tools, which do not show any standardized pattern. Usually, the manufacture of small standardized tools has been interpreted as a more complex behavior emerging with the Acheulean technology. Here we report on the ~1.7 Ma Oldowan assemblages from Garba IVE-F at Melka Kunture in the Ethiopian highland. This industry is structured by technical criteria shared by the other East African Oldowan assemblages. However, there is also evidence of a specific technical process never recorded before, i.e. the systematic production of standardized small pointed tools strictly linked to the obsidian exploitation. Standardization and raw material selection in the manufacture of small tools disappear at Melka Kunture during the Lower Pleistocene Acheulean. This proves that 1) the emergence of a certain degree of standardization in tool-kits does not reflect in itself a major step in cultural evolution; and that 2) the Oldowan knappers, when driven by functional needs and supported by a highly suitable raw material, were occasionally able to develop specific technical solutions. The small tool production at ~1.7 Ma, at a time when the Acheulean was already emerging elsewhere in East Africa, adds to the growing amount of evidence of Oldowan techno-economic variability and flexibility, further challenging the view that early stone knapping was static over hundreds of thousands of years. 相似文献
11.
Many vertebrate species exhibit sensory and motor asymmetries. Laterality studies of tool use have focused on primates, where hemispheric asymmetries, manifested behaviourally in hand preferences, are thought to be associated with complex motor tasks. Here we report strong individual lateralization for tool use in birds. New Caledonian crows, Corvus moneduloides, hold stick tools with their bills while foraging, often with the nonworking end laterally positioned on one side of the head and the working end possibly positioned in the binocular field. We observed four wild crows to determine whether tools were consistently held on one side. All crows showed a significant preference (two right, two left). This preference was independent of any asymmetry in tool manufacture and held for artificial holes similarly accessible for tools held on either side. This is the first demonstration of lateralized tool use in a nonprimate. In addition, all 173 tools used unilaterally were held only on a crow's preferred side. Such pronounced individual laterality for tool use in natural conditions has previously been reported only in humans and chimpanzees. 相似文献
12.
Background
Using tools to act on non-food objects—for example, to make other tools—is considered to be a hallmark of human intelligence, and may have been a crucial step in our evolution. One form of this behaviour, ‘sequential tool use’, has been observed in a number of non-human primates and even in one bird, the New Caledonian crow (Corvus moneduloides). While sequential tool use has often been interpreted as evidence for advanced cognitive abilities, such as planning and analogical reasoning, the behaviour itself can be underpinned by a range of different cognitive mechanisms, which have never been explicitly examined. Here, we present experiments that not only demonstrate new tool-using capabilities in New Caledonian crows, but allow examination of the extent to which crows understand the physical interactions involved.Methodology/Principal Findings
In two experiments, we tested seven captive New Caledonian crows in six tasks requiring the use of up to three different tools in a sequence to retrieve food. Our study incorporated several novel features: (i) we tested crows on a three-tool problem (subjects were required to use a tool to retrieve a second tool, then use the second tool to retrieve a third one, and finally use the third one to reach for food); (ii) we presented tasks of different complexity in random rather than progressive order; (iii) we included a number of control conditions to test whether tool retrieval was goal-directed; and (iv) we manipulated the subjects'' pre-testing experience. Five subjects successfully used tools in a sequence (four from their first trial), and four subjects repeatedly solved the three-tool condition. Sequential tool use did not require, but was enhanced by, pre-training on each element in the sequence (‘chaining’), an explanation that could not be ruled out in earlier studies. By analyzing tool choice, tool swapping and improvement over time, we show that successful subjects did not use a random probing strategy. However, we find no firm evidence to support previous claims that sequential tool use demonstrates analogical reasoning or human-like planning.Conclusions/Significance
While the ability of subjects to use three tools in sequence reveals a competence beyond that observed in any other species, our study also emphasises the importance of parsimony in comparative cognitive science: seemingly intelligent behaviour can be achieved without the involvement of high-level mental faculties, and detailed analyses are necessary before accepting claims for complex cognitive abilities. 相似文献13.
G. R. Hunt 《New Zealand journal of zoology.》2013,40(2):115-118
Abstract New Caledonian crows commonly use sticks and similar plant material as hooked and non‐hooked tools to extract prey. They are known to target certain tree species that produce twigs of the right natural shape for easy conversion into tools. All previously identified species supplying tool materials have been native or endemic to New Caledonia. Here I report that crows living in disturbed habitats also use the barbed twigs of an introduced climbing plant, Lantana camara, as tools. Over an 8‐year period I collected 12 L. camara tools used by NC crows at three locations: Bourail and Sarraméa, on mainland Grande Terre, and on the island of Maré. I found these tools left in natural probe sites (Bourail and Sarraméa) or at artificial feeding sites (Maré), but I do not know if the crows targeted L. camara or simply used the closest suitable material. Nevertheless, the use of L. camara indicates that the behaviour of certain free‐living NC crows is sufficiently flexible to enable them to evaluate and use exotic plants for tool material. 相似文献
14.
15.
Heritable variation in regulatory or coding regions is the raw material for evolutionary processes. The advent of microarrays has recently promoted examination of the extent of variation in gene expression within and among taxa and examination of the evolutionary processes affecting variation. This review examines these issues. We find: (i) microarray-based measures of gene expression are precise given appropriate experimental design; (ii) there is large inter-individual variation, which is composed of a minor nongenetic component and a large heritable component; (iii) variation among populations and species appears to be affected primarily by neutral drift and stabilizing selection, and to a lesser degree by directional selection; and (iv) neutral evolutionary divergence in gene expression becomes nonlinear with greater divergence times due to functional constraint. Evolutionary analyses of gene expression reviewed here provide unique insights into partitioning of regulatory variation in nature. However, common limitations of these studies include the tendency to assume a linear relationship between expression divergence and species divergence, and failure to test explicit hypotheses that involve the ecological context of evolutionary divergence. 相似文献
16.
I. Teschke C. A. F. Wascher M. F. Scriba A. M. P. von Bayern V. Huml B. Siemers S. Tebbich 《Philosophical transactions of the Royal Society of London. Series B, Biological sciences》2013,368(1630)
The use and manufacture of tools have been considered to be cognitively demanding and thus a possible driving factor in the evolution of intelligence. In this study, we tested the hypothesis that enhanced physical cognitive abilities evolved in conjunction with the use of tools, by comparing the performance of naturally tool-using and non-tool-using species in a suite of physical and general learning tasks. We predicted that the habitually tool-using species, New Caledonian crows and Galápagos woodpecker finches, should outperform their non-tool-using relatives, the small tree finches and the carrion crows in a physical problem but not in general learning tasks. We only found a divergence in the predicted direction for corvids. That only one of our comparisons supports the predictions under this hypothesis might be attributable to different complexities of tool-use in the two tool-using species. A critical evaluation is offered of the conceptual and methodological problems inherent in comparative studies on tool-related cognitive abilities. 相似文献
17.
Marie Orange Tristan Carter François-Xavier Le Bourdonnec 《Comptes Rendus Palevol》2019,18(2):268-282
This paper details an integrated characterisation study of a substantial assemblage of obsidian artefacts (n = 519) from the Syrian Neolithic site of Qdeir 1 (El Kowm oasis). The results of the chemical characterisation (using ED-XRF and SEM–EDS) have been coupled with the typo-technological data. Such an approach has allowed us (i) to identify four raw materials in the assemblage, namely Bingöl A and Bingöl B from eastern Anatolia, plus Göllü Da? and Nenezi Da? from central Anatolia, (ii) to specifically source the distinctive green peralkaline obsidian to Bingöl A (rather than ‘Bingöl A and/or Nemrut Da?’), (iii) to observe that these four raw materials were consumed in a nigh-identical manner, probably worked locally by specialist craftspeople to produce fine pressure flaked blades, and (iv) to hypothesise that the people of Qdeir 1 may have played a key redistributive role in the circulation of obsidian tools, likely supplying the neighbouring village of El Kowm. 相似文献
18.
Multidimensional modeling and analysis of large and complex watercourse data: an OLAP-based solution
This paper presents the application of Data Warehouse (DW) and On-Line Analytical Processing (OLAP) technologies to the field of water quality assessment. The European Water Framework Directive (DCE, 2000) underlined the necessity of having operational tools to help in the interpretation of the complex and abundant information regarding running waters and their functioning. Several studies have exemplified the interest in DWs for integrating large volumes of data and in OLAP tools for data exploration and analysis.Based on free software tools, we propose an extensible relational OLAP system for the analysis of physicochemical and hydrobiological watercourse data. This system includes: (i) two data cubes; (ii) an Extract, Transform and Load (ETL) tool for data integration; and (iii) tools for OLAP exploration. Many examples of OLAP analysis (thematic, temporal, spatiotemporal, and multiscale) are provided. We have extended an existing framework with complex aggregate functions that are used to define complex analysis indicators. Additional analysis dimensions are also introduced to allow their calculation and also for purposes of rendering information. Finally, we propose two strategies to address the problem of summarizing heterogeneous measurement units by: (i) transforming source data at the ETL tier, and (ii) introducing an additional analysis dimension at the OLAP server tier. 相似文献
19.
Although many indicator-based sustainability monitoring tools for agriculture have been developed in the last decade, considerably less effort has been put on their validation. In the present study, we developed and applied a procedure to validate (i) MOTIFS (Monitoring Tool for Integrated Farm Sustainability), an indicator-based monitoring tool for integrated farm sustainability of Flemish dairy farms and (ii) a selection of ecological indicators (included in MOTIFS), related to nutrient use, energy use, water use and water quality. The procedure considers two steps. The first step is an accuracy evaluation, which consists of a design validation related to the scientific quality of MOTIFS and its selected indicators, and an output validation that is an evaluation of the information supplied by their output. For both validation types, we applied a transdisciplinary approach of stakeholder participation. The second step is a credibility evaluation, which relates to the degree of confidence potential end-users have in MOTIFS and hence their willingness to effectively use it in practice. This involves an end-use validation, for which we designed a test to evaluate (i) the end-use value of the selected indicators as decision aid tools, (ii) the end-use value of MOTIFS as a decision aid tool and communication tool and (iii) the willingness of potential end-users to use MOTIFS in practice. We considered two potential end-user groups: Flemish dairy farmers and ‘sustainability consultants’ (e.g. agricultural advisors assigned by farmer's organisations). Based on the validation results, we made suggestions to improve the tool and its effective application in practice. We concluded that MOTIFS is a potentially effective sustainability monitoring and management tool, since it has major assets that should be incorporated in any indicator-based system: positioning, informing, learning and communicating. 相似文献
20.
SUMMARY: We present an operon predictor for prokaryotic operons (PPO), which can predict operons in the entire prokaryotic genome. The prediction algorithm used in PPO allows the user to select binary particle swarm optimization (BPSO), a genetic algorithm (GA) or some other methods introduced in the literature to predict operons. The operon predictor on our web server and the provided database are easy to access and use. The main features offered are: (i) selection of the prediction algorithm; (ii) adjustable parameter settings of the prediction algorithm; (iii) graphic visualization of results; (iv) integrated database queries; (v) listing of experimentally verified operons; and (vi) related tools. Availability and implementation: PPO is freely available at http://bio.kuas.edu.tw/PPO/. 相似文献