Cloning and sequence analysis of a plasmid replicon from Lactococcus lactis subsp. cremoris FG2

A replication region from one of the Lactococcus lactis subsp. cremoris FG2 plasmids was isolated by cloning of a 4.8-kb XbaI fragment into a replication probe vector and transformation into L. lactis LM0230. A 1.8-kb region within this fragment was sequenced and confirmed by PCR subcloning to encode a functional replicon in LM0230. The replicon consists of an open reading frame encoding a putative replication protein (Rep) of 386 amino acids and a non-coding region (ori) which features several structural motifs typical of other known replication origins, including a 22-bp iteron sequence tandemly repeated three and a half times, a 10-bp direct repeat and two sets of inverted repeats. The ori region could drive replication of its plasmid when supplied with the replication region in-trans. The lack of detectable single-stranded DNA during replication and the existence of extensive homology with other known lactococcal theta replicons strongly suggest that this region encodes a theta-replicating mechanism.     

Nucleotide sequence and replication characteristics of RepFIB, a basic replicon of IncF plasmids.

A second autonomous replicon of P307, RepFIB, has been isolated that has significant homology with other replicons in IncFI group plasmids. Eleven homologous repeats of 21 base pairs are present on the sequence and flank an open reading frame capable of coding for a protein of about Mr = 40,000. This protein was identified by maxicell analysis of cloned RepFIB. A series of deletion mutations of RepFIB were inserted into a DNA polymerase I-dependent vector and examined for their replication proficiency in a polA1 strain. These experiments defined a minimal replication region of 1.6 kilobases which includes the three repeats immediately upstream and downstream of the open reading frame. Deletion of a second set of repeats further downstream doubled the copy number of a chimeric plasmid replicating under RepFIB control. It was concluded that these repeats control the copy number of the replicon. Incompatibility tests showed that all three sets of repeats could express incompatibility with a resident RepFIB plasmid.     

Characterization of a Theta Plasmid Replicon with Homology to All Four Large Plasmids ofBacillus megateriumQM B1551

A replicon from one of an array of seven indigenous compatible plasmids ofBacillus megateriumQM B1551 has been cloned and sequenced. The replicon hybridized with all four of the large plasmids (165, 108, 71, and 47 kb) of strain QM B1551. The cloned 2374-bpHindIII fragment was sequenced and contained two upstream palindromes and a large (>419-amino-acid) open reading frame (ORF) truncated at the 3′ end. Unlike most plasmid origins, a region of four tandem 12-bp direct repeats was located within the ORF. The direct repeats alone were incompatible with the replicon, suggesting that they are iterons and that the plasmid probably replicates by theta replication. The ORF product was shown to act intrans.A small region with similarity to theB. subtilischromosomal origin membrane binding region was detected as were possible binding sites for DnaA and IHF proteins. Deletion analysis showed the minimal replicon to be a 1675-bp fragment containing the incomplete ORF plus 536 bp upstream. The predicted ORF protein of >48 kDa was basic and rich in glutamate + glutamine (16%). There was no significant amino acid similarity to any gene, nor were there any obvious motifs present in the ORF. The data suggest that this is a theta replicon with an expressedrepgene required for replication. The replicon contains its iterons within the gene and has no homology to reported replicons. It is the first characterization of aB. megateriumreplicon.     

Genetic analysis of the minimal replicon of the Lactococcus lactis subsp. lactis biovar diacetylactis citrate plasmid

Using a combination of mutagenesis with the transposon and polymerase chain reaction subcloning, the essential elements of the replication region of the Lactococcus lactis subsp. lactis biovar diacetylactis citrate plasmid have been identified. An open reading frame, coding for a protein with homology to Rep proteins from other Lactococcus plasmids, is essential. This protein is trans-acting and could not be replaced by the Rep protein from another Lactococcus plasmid. A second open reading frame immediately downstream from the first could be removed or inactivated with no apparent effect on plasmid replication. A region containing two 10 by direct repeats and three tandem repeats of a 22 by sequence, immediately upstream of the essential open reading frame, is also essential and probably includes the origin of replication. A 181-bp DNA fragment containing this region was sufficient to allow replication in Lactococcus if the trans-acting protein was provided on another replicon. Single-stranded replication intermediates could not be detected, suggesting that the citrate plasmid uses theta replication rather than rolling-circle replication.     

Molecular Characterization of Plasmid pBM300 from Bacillus megaterium QM B1551

Strain QM B1551 of Bacillus megaterium contains seven compatible plasmids: two small rolling circle plasmids and five theta-replicating plasmids with cross-hybridizing replicons. To expand our understanding of these plasmids, the replicon region (6.7 kb) from pBM300 was cloned, sequenced, and functionally characterized. Sequence analysis showed that the replication protein (RepM300) was highly homologous to two other plasmid Rep proteins of the same strain but to no other known proteins. Furthermore, the location of the replication origin was within the RepM300 coding region, and the origin contained three 12-base direct repeats. Deletion analysis of the replicon confirmed the role of the Rep protein and showed that open reading frame 2 (ORF2) was required for stability. However, the protein encoded by ORF2 is entirely different from the replicon stability proteins encoded by the other two replicons. The entire plasmid was isolated from the plasmid array by integrating a spectinomycin resistance gene and transforming a plasmidless strain, PV361. Complete sequencing showed that pBM300 was 26,300 bp long, had a G+C content of 35.2%, and contained 20 ORFs, two of which encoded proteins that had no similarity to other proteins in the database. The proteins encoded by the plasmid ORFs had similarity to proteins for mobilization and transfer, an integrase, a rifampin resistance protein, a cell wall hydrolase, glutathione synthase, and a biotin carboxylase. The similarities were to several gram-positive genera and a few gram-negative genera and archaea. oriT and ssoT-like regions were detected near two mob genes. These results suggest that pBM300 is a mobilizable hybrid plasmid that confers increased metabolic and germination ability on its host. Its replicon also helps define a new plasmid family.     

Distribution and Replication of the Pathogenicity Plasmid pPATH in Diverse Populations of the Gall-Forming Bacterium Pantoea agglomerans

Pantoea agglomerans has been transformed from a commensal bacterium into two related gall-forming pathovars by acquisition of pPATH plasmids containing a pathogenicity island (PAI). This PAI harbors an hrp/hrc gene cluster, type III effectors, and phytohormone biosynthetic genes. DNA typing by pulsed-field gel electrophoresis revealed two major groups of P. agglomerans pv. gypsophilae and one group of P. agglomerans pv. betae. The pPATH plasmids of the different groups had nearly identical replicons (98% identity), and the RepA protein showed the highest level of similarity with IncN plasmid proteins. A series of plasmids, designated pRAs, in which the whole replicon region (2,170 bp) or deleted derivatives of it were ligated with nptI were generated for replicon analysis. A basic 929-bp replicon (pRA6) was sufficient for replication in Escherichia coli and in nonpathogenic P. agglomerans. However, the whole replicon region (pRA1) was necessary for expulsion of the pPATH plasmid, which resulted in the loss of pathogenicity. The presence of direct repeats in the replicon region suggests that the pPATH plasmid is an iteron plasmid and that the repeats may regulate its replication. The pPATH plasmids are nonconjugative but exhibit a broad host range, as shown by replication of pRA1 in Erwinia, Pseudomonas, and Xanthomonas. Restriction fragment length polymorphism analyses indicated that the PAIs in the two groups of P. agglomerans pv. gypsophilae are similar but different from those in P. agglomerans pv. betae. The results could indicate that the pPATH plasmids evolved from a common ancestral mobilizable plasmid that was transferred into different strains of P. agglomerans.     

Characterization of a Theta-Type Plasmid from Lactobacillus sakei: a Potential Basis for Low-Copy-Number Vectors in Lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

Functional Analysis of Three Plasmids from Lactobacillus plantarum

Lactobacillus plantarum WCFS1 harbors three plasmids, pWCFS101, pWCFS102, and pWCFS103, with sizes of 1,917, 2,365, and 36,069 bp, respectively. The two smaller plasmids are of unknown function and contain replication genes that are likely to function via the rolling-circle replication mechanism. The host range of the pWCFS101 replicon includes Lactobacillus species and Lactococcus lactis, while that of the pWCFS102 replicon also includes Carnobacterium maltaromaticum and Bacillus subtilis. The larger plasmid is predicted to replicate via the theta-type mechanism. The host range of its replicon seems restricted to L. plantarum. Cloning vectors were constructed based on the replicons of all three plasmids. Plasmid pWCFS103 was demonstrated to be a conjugative plasmid, as it could be transferred to L. plantarum NC8. It confers arsenate and arsenite resistance, which can be used as selective markers.     

Theta replication of the lactococcal plasmid pWVO2

pWVO2 is a 3.8 kb narrow-host-range plasmid from Lactococcus lactis ssp. cremoris Wg2, which does not replicate in Bacillus subtilis or Escherichia coli. Single-stranded pWVO2 DNA was not observed in lactococcal cells, indicating that this plasmid does not replicate via a rolling-circle mechanism. The sequence of pWVO2 neither showed the structural organization typical for rolling-circle plasmids, nor were sequence similarities with known rolling-circle plasmids present. By 2-D agarose gel electrophoresis of replication intermediates, it was shown that pWVO2 replicates via a theta mechanism. This is the first proof for the existence of theta-replicating plasmids in lactococci. The pWVO2 minimal replicon is strongly related to that of several other lactococcal plasmid replicons. It contains one open reading frame encoding the replication protein, which is preceded by a 22 bp sequence tandemly repeated three and a half times. Further upstream is another 10bp direct repeat present in an A/T-rich sequence. This structural organization resembles that of several iteroncontaining theta-type plasmids from E. coli. Derivatives of pWVO2 were stably maintained in L. lactis and are good candidates for the development of stable food-grade cloning vectors for this organism.     

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

Plasmid-Encoded Anthranilate Synthase (TrpEG) in Buchnera aphidicola from Aphids of the Family Pemphigidae

Buchnera aphidicola is an obligate intracellular symbiont of aphids. One of its proposed functions is the synthesis of essential amino acids, nutrients required by aphids but deficient in their diet of plant phloem sap. The genetic organization of the tryptophan pathway in Buchnera from proliferous aphids of the family Aphididae has previously been shown to reflect a capacity to overproduce this essential amino acid (C.-Y. Lai, L. Baumann, and P. Baumann, Proc. Natl. Acad. Sci. USA 91:3819–3823, 1994). This involved amplification of the genes for the first enzyme in the pathway, anthranilate synthase (TrpEG), on a low-copy-number plasmid. Here we report on the finding and molecular characterization of TrpEG-encoding plasmids in Buchnera from aphids of the distantly related family Pemphigidae. Buchnera from Tetraneura caerulescens contained a 3.0-kb plasmid (pBTc2) that carried a single copy of trpEG and resembled trpEG plasmids of Buchnera from the Aphididae. The second plasmid (pBPs2), isolated from Buchnera of Pemphigus spyrothecae, contained a different replicon. It consisted of a putative origin of replication containing iterons and an open reading frame, designated repAC, which showed a high similarity to the gene encoding the replication initiation protein RepA of the RepA/C replicon from the broad-host-range IncA/C group of plasmids. The plasmid population was heterogeneous with respect to the number of tandem repeats of a 1.8-kb unit carrying repAC₁, trpG, and remnants of trpE. The two principal forms consisted of either five or six copies of this repeat and a single-copy region carrying repAC₂, the putative origin of replication, and trpE. The unexpected finding of elements of the RepA/C replicon in previously characterized trpEG plasmids from Buchnera of the Aphididae suggests that a replacement of replicons has occurred during the evolution of these plasmids, which may point to a common ancestry for all Buchnera trpEG amplifications.     

Genetic map of the virulence plasmid of Salmonella enteritidis and nucleotide sequence of its replicons

Partial sequencing of a genomic library of the virulence plasmid of Salmonella enteritidis has been used to localize in the restriction map of this plasmid the genetic loci already described in other Salmonella plasmids. The comparison of the vestigial tra region with the corresponding genes in the F plasmid allowed us to define the extent of the deletions that the S. enteritidis plasmid should have suffered. The putative replicons of the plasmid, repB and repC, were isolated and both proved to be functional in Escherichia coli, but repC was segregationally unstable. The nucleotide sequence of repB showed the typical organization of RepFIIA replicons, although the similarity was lower than usual in this group of replicons. The highest homology was found with the replicon of the virulence plasmid pYVe439-80 from Yersinia enterocolitica (72.5%). Replicon repC also showed a maximum identity of 72.6% with known replicons, namely the RepFIB of pColV-K30 and P307, both virulence plasmids isolated from E. coli. We conclude that the S. enteritidis plasmid could arise from the S. typhimurium plasmid through deletions, and that they are evolutionary distant from other IncFI and IncFII plasmids.     

Characterization of the basic replicons of the chimeric R/Ent plasmid pCG86 and the related Ent plasmid P307

Restriction-enzyme fragments that can replicate autonomously after circularization were isolated from the chimeric R/Ent plasmid pCG86 and the Ent plasmid P307. Two such regions containing a basic replicon were located in each plasmid. One of the basic replicons of P307, RepFIB, is almost identical with one of the basic replicons of pCG86. The other basic replicon in P307, RepFIC, is partly homologous with the second basic replicon in pCG86, RepFIIA/RepFIC. The latter is a hybrid basic replicon and is in addition partly homologous with RepFIIA, a basic replicon present in IncFII R plasmids. By restriction-enzyme mapping and nucleotide-sequence analysis we have determined a site in the hybrid replicon where it ceases to be homologous with the RepFIIA basic replicon contained in the IncFII miniplasmid pSM1. The 2410-bp region of homology with pSM1 corresponds with a segment containing the origin of replication and all the genes responsible for replication control of pSM1.     

Identification and nucleotide sequence of the minimal replicon of the low-copy-number plasmid pBS2

The plasmid pBS2 has a low copy number and is endogenous to Bacillus subtilis. The replication of this plasmid depends on the function of most of the host's dna genes including dnaB, which is unique to B. subtilis and is required for both the initiation of chromosome replication and the DNA-membrane association. We have identified the region that is essential for the replication of pBS2 and determined the complete 2279-bp nucleotide sequence of this region. In this region, there are two stretches of sequence homologous to the 18-bp consensus sequence which commonly appears at the origin of replication of plasmids pUB110 and pC194. The entire region contains six sizable open reading frames. Two of them are probably translated. One open reading frame, designated ORF A, coding for 269 amino acids, has significant homology, in terms of amino acid sequence, with the open reading frame of the gene for the Rep U protein of plasmid pUB110. The similarities between pBS2 and other plasmids suggest that the pBS2 may also replicate as a rolling circle, which appears to be the salient feature of a mechanism of replication that is common to small plasmids in gram-positive bacteria.     

Characterization of a cryptic plasmid from Lactobacillus fermentum KC5b and its use for constructing a stable Lactobacillus cloning vector

Lactobacillus fermentum KC5b, a strain originally isolated from the human vagina, contains a cryptic plasmid pKC5b. The sequence and genetic organization of the 4392-bp plasmid were determined. It contains two convergently oriented replicons, which are homologous to each other and to the stable replicon of the Enterococcus faecium plasmid pMBB1. The two replicons of pKC5b were used either individually or together to construct Lactobacillus–Escherichia coli shuttle plasmids. Only the plasmid pSP1 that carried both replicons transformed lactobacilli, suggesting a complementary function between the two replicons. Since the replicons had a high homology to those of other plasmids that replicate via a theta-like mechanism and no detectable single-stranded intermediates were found for the plasmid, it is possible that pKC5b may replicate via a theta-like mechanism. The new shuttle plasmid pSP1 has been transformed and stably maintained in several Lactobacillus strains. As an initial application, pSP1 was used to clone the S-layer protein gene (slpA) of Lactobacillus acidophilus ATCC 4356 into a heterologous vaginal Lactobacillus strain and achieved surface-bound expression of the protein.     

Characterization of pES213, a small mobilizable plasmid from Vibrio fischeri

Most Vibrio fischeri strains isolated from the Euprymna scolopes light organ carry plasmids, often including both a large (>40kb) plasmid, and one or more small (<12kb) plasmids. The large plasmids share homology with pES100, which is the lone plasmid in V. fischeri type strain ES114. pES100 appears to encode a conjugative system similar to that on plasmid R721. The small plasmids lack extensive similarity to pES100, but they almost always occur in cells that also harbor a large plasmid resembling pES100. We found that many or all of these small plasmids share homology with pES213, a plasmid in strain ES213. We determined the 5501-bp pES213 sequence and generated selectable antibiotic resistance encoding pES213 derivatives, which enabled us to examine replication, retention, and transfer in V. fischeri. An 863-bp fragment of pES213 with features characteristic of theta-type replicons conferred replication without requiring any pES213 open reading frame (ORF). We estimated that pES213 derivatives were maintained at 9.4 copies per genome, which corresponds well with a model of random plasmid segregation to daughter cells and the approximately 10(-4) per generation frequency of plasmid loss. pES213 derivatives mobilized between V. fischeri strains at frequencies up to approximately 10(-4) in culture and in the host, apparently by employing the pES100 conjugative apparatus. pES213 carries two homologs of the putative pES100 origin of transfer (oriT), and V. fischeri strains lacking the pES100 conjugative relaxase, including a relaxase mutant, failed to serve as donors for transmission of pES213 derivatives. In other systems, genes directing conjugative transfer can function in trans to oriT, so it was noteworthy that ORFs adjacent to oriT, VFB51 in pES100 and traYZ in pES213, enhanced transfer 100- to 1000-fold when provided in cis. We also identified and disrupted the V. fischeri recA gene. RecA was not required for stable pES213 replication but surprisingly was required in donors for efficient transfer of pES213 derivatives. These studies provide an explanation for the prevalence and co-occurrence of pES100- and pES213-type plasmids, illuminate novel elements of pES213 mobilization, and provide the foundation for new genetic tools in V. fischeri.     

Plasmid pHH1 of Halobacterium salinarium: characterization of the replicon region,the gas vesicle gene cluster and insertion elements

The DNA sequence of the 5.7 kb plasmid pHH9 containing the replicon region of the 150 kb plasmid pHH1 from Halobacterium salinarium was determined. The minimal region necessary for stable plasmid maintenance lies within a 2.9 kb fragment, as defined by transformation experiments. The DNA sequence contained two open reading frames arranged in opposite orientations, separated by an unusually high AT-rich (60–70% A + T) sequence of 350 bp. All H. salinarium strains (H. halobium, H. cutirubrum) investigated harbour endogenous plasmids containing the pHH1 replicon; however, these pHH1-type plasmids differ by insertions and deletions. Adjacent to the replicon, and separated by a copy of each of the insertion elements ISH27 and ISH26, is the 9 kb p-vac region required for gas vesicle synthesis. Analysis of these and other ISH element copies in pHH1 revealed that most of them lack the target DNA duplication usually found with recently transposed ISH elements. These results underline the plasticity of plasmid pHH1.     

Theta-type DNA replication stimulates homologous recombination in the Bacillus subtilis chromosome

To test the effects of theta-type replication on homologous DNA recombination, we integrated in the chromosome of Bacillus subtilis a structure comprising a conditional replication region and direct repeats of ∼ 4 kb. The replicon was derived from a broad-host-range plasmid, pAMβ1, which replicates by a unidirectional theta mechanism and is thermosensitive. The direct repeats were derived from plasmid pBR322 and flanked the chloramphenicol-resistance gene of plasmid pC194. Recombination between the repeats could therefore lead to a loss of the resistance gene or the appearance of additional repeats. The integrated replicon was active at the permissive temperature, and ∼ 25% of the integrated plasmids could be isolated as Y-shaped molecules after restriction, having a branch at the replication origin. Replicon activity stimulated recombination four- to fivefold, as estimated from the proportion of chloramphenicol-sensitive cells at the restrictive and permissive temperature, and also led to the appearance of additional direct repeats. We conclude that theta-type replication stimulates homologous recombination and suggest that many or even most recombination events between long homologous sequences present in a bacterial genome may be the consequence of DNA replication.