Synthetic consolidants attacked by melanin-producing fungi: case study of the biodeterioration of Milan (Italy) cathedral marble treated with acrylics

Monuments and artistic stone surfaces are often consolidated and protected with synthetic polymers, in particular, acrylics. Although it is generally thought that acrylic polymers are resistant to biodeterioration, we report for the first time the systematic occurrence of dematiaceous meristematic fungi on many marble samples of the cathedral in Milan (Italy) previously treated with this material. Fourier transform infrared spectroscopy applied to the Milan cathedral stone samples revealed characteristic features of biodeteriorated synthetic resins that differentiated them from the aged but nonbiodeteriorated samples. Samples showing biological colonization were analyzed for the presence of fungi. Cultivation and morphological characterization and methods independent from cultivation, such as denaturing gradient gel electrophoresis coupled with partial 18S rRNA gene sequencing and immunofluorescence staining with melanin-binding antibodies, showed that melanin-producing species are heavily present on stone surfaces protected with acrylic resins. This observation raises the question of the effectiveness of acrylics in protecting stone artworks.     

Importance of subaerial biofilms and airborne microflora in the deterioration of stonework: a molecular study

The study characterized the sessile microbial communities on mortar and stone in Milan University's Richini's Courtyard and investigated the relationship between airborne and surface-associated microbial communities. Active colonization was found in three locations: green and black patinas were present on mortar and black spots on stone. Confocal laser scanning microscopy, scanning electron microscopy and culture-independent molecular methods revealed that the biofilm causing deterioration was dominated by green algae and black fungi. The mortar used for restoration contained acrylic and siloxane resins that could be used by microorganisms as carbon and energy sources thereby causing proliferation of the biofilm. Epifluorescence microscopy and culture-based methods highlighted a variety of airborne microflora. Bacterial and fungal counts were quantitatively similar to those reported in other investigations of urban areas, the exception being fungi during summer (1–2 orders of magnitude higher). For the first time in the cultural heritage field, culture-independent molecular methods were used to resolve the structure of airborne communities near discoloured surfaces, and to investigate the relationship between such communities and surface-associated biofilms.     

Trevi Fountain: An evaluation of inhibition effect of water-repellents on cyanobacteria and algae

This work presents the biological aspect of a more extensive research to choose a water-repellent to apply to stone surfaces of the Trevi Fountain in Rome (Italy). The effect of water-repellent treatments on cyanobacterial and algal colonizations was investigated and the alteration induced by microflora on efficacy of the polymers used, was also considered. Carrara marble and travertine from Tivoli samples were treated with an acrylic polymer, two oligomeric polysiloxanes and an ethylsilicate polysiloxane. The stone samples were partly immersed in slow-flowing water inside polyethylene vessels placed in the Trevi Fountain basin. The qualitative and quantitative characteristics of biocoenosis were determined. The characteristics of polymers were evaluated by contact angle, measures of surface roughness, SEM observations and EDAX microanalysis. The presence of the tested products on stone samples had no inhibition effect on the microflora growth.     

Biotechnological production of itaconic acid

Itaconic acid (IA) is an unsaturated dicarbonic organic acid. It can easily be incorporated into polymers and may serve as a substitute for petrochemical-based acrylic or methacrylic acid. It is used at 1-5% as a co-monomer in resins and also in the manufacture of synthetic fibres, in coatings, adhesives, thickeners and binders. The favoured production process is fermentation of carbohydrates by fungi, with a current market volume of about 15,000 t/a. Due to the high price of about US$ 4/kg, the use of IA is restricted. At present, the production rates do not exceed 1 g l(-1) h(-1), accompanied by product concentrations of about 80 g l(-1). New biotechnology approaches, such as immobilisation techniques, screening programmes and genetic engineering, could lead to higher productivity. Also, the use of alternative substrates may reduce costs and thus open the market for new and increased applications.     

Application of light-cured dental adhesive resin for mounting electrodes or microdialysis probes in chronic experiments

In chronic recording experiments, self-curing dental acrylic resins have been used as a mounting base of electrodes or microdialysis-probes. Since these acrylics do not bond to the bone, screws have been used as anchors. However, in small experimental animals like finches or mouse, their craniums are very fragile and can not successfully hold the anchors. In this report, we propose a new application of light-curing dental resins for mounting base of electrodes or microdialysis probes in chronic experiments. This material allows direct bonding to the cranium. Therefore, anchor screws are not required and surgical field can be reduced considerably. Past experiences show that the bonding effect maintains more than 2 months. Conventional resin's window of time when the materials are pliable and workable is a few minutes. However, the window of working time for these dental adhesives is significantly wider and adjustable.     

Resins for Combined Light and Electron Microscopy: A Half Century of Development

The last fifty years have seen enormous improvements in the way biological specimens are prepared for microscopy. The Fifties produced the essential groundwork upon which many of our current methodologies are based. Acrylic resin embedding was introduced in 1949, with subsequent publications seeking improvements to resin formulations, embedding protocols, and modes of polymerisation. Procedures for progressive lowering of temperature processing, cryosubstitution, freeze-drying and polymerisation by ultra-violet light at low temperatures, all had their genesis in this decade of great innovation. The Sixties marked the period when the acrylics were eclipsed by the more stable and reliable epoxy resins, and much of our present-day understanding of ultrastructure was elucidated. The Seventies carried on this work with advances in technical developments concerned mainly with freezing methodologies. The beginning of the Eighties saw a resurrection of the acrylic resins, with new formulations of these resins giving reliable and stable embeddings. The low temperature and freezing methodologies pioneered in the Fifties, backed up by recent improvements to low temperature technologies, were used to further our understanding of ultrastructure and breathe new life into the science of immunocytochemistry. The remainder of the Eighties and Nineties has seen the ever increasing application of these various microscopical techniques to a wide range of biological studies. The flexibility offered by the acrylic resins in choosing between different processing, embedding and polymerisation methods has provided the impetus for detailed studies to bring to the attention of microscopists the underlying trends governing specimen preparation. Therefore, looking forward to the new Millennium, this has allowed for a more reasoned choice in organising a strategy to deal with a variety of microscopical requirements and for planning an appropriate protocol.     

An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties

Global increase in patients seeking orthodontic treatment creates a demand for the use of acrylic resins in removable appliances and retainers. Orthodontic removable appliance wearers have a higher risk of oral infections that are caused by the formation of bacterial and fungal biofilms on the appliance surface. Here, we present the synthetic route for an antibacterial and antifungal organically-modified silicate (ORMOSIL) that has multiple methacryloloxy functionalities attached to a siloxane backbone (quaternary ammonium methacryloxy silicate, or QAMS). By dissolving the water-insoluble, rubbery ORMOSIL in methyl methacrylate, QAMS may be copolymerized with polymethyl methacrylate, and covalently incorporated in the pressure-processed acrylic resin. The latter demonstrated a predominantly contact-killing effect on Streptococcus mutans ATCC 36558 and Actinomyces naselundii ATCC 12104 biofilms, while inhibiting adhesion of Candida albicans ATCC 90028 on the acrylic surface. Apart from its favorable antimicrobial activities, QAMS-containing acrylic resins exhibited decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility, when compared with QAMS-free acrylic resin. The covalently bound, antimicrobial orthodontic acrylic resin with improved toughness represents advancement over other experimental antimicrobial acrylic resin formulations, in its potential to simultaneously prevent oral infections during appliance wear, and improve the fracture resistance of those appliances.     

The Piccolyte Resins as Microscopic Mounting Media

A new series of synthetic resins, the “Piccolytes” (β-pinene polymers), is recommended for permanent mounting media in histological work. These resins, which are available with various melting points, are of correct refractive indices, very low acid numbers, are pale, non-yellowing, have good adhesion to glass, and are freely soluble in xylene. Of a considerable variety of newer synthetic resins which were tried (stimulated by the recent scarcity of Canada balsam), only these terpene resins were found entirely satisfactory. Being of controlled manufacture, they are uniform in characteristics as well as readily available and very cheap.

A partial review of the literature of synthetic resin mountants is included.     

Two new Cladophialophora species,C. tumbae sp. nov. and C. tumulicola sp. nov., and chaetothyrialean fungi from biodeteriorated samples in the Takamatsuzuka and Kitora Tumuli

During dismantling and relocation of the Takamatsuzuka Tumulus stone chamber, many Cladophialophora and chaetothyrialean black fungi, such as Exophiala and Phialophora, were isolated from samples taken from the joints between the stone walls. However, inside the stone chamber of the Kitora Tumulus, after intermittent UV irradiation in 2009, these black fungi were also isolated from samples taken from the stone walls. Molecular phylogenetic analyses based on only nrLSU and the concatenated (nrLSU D1/D2 + ITS) sequences revealed that the 35 Takamatsuzuka and Kitora Tumuli isolates of Cladophialophora and the chaetothyrialean black fungi were divergent. Two new species of Cladophialophora are described herein: C. tumulicola from the viscous gels and various substrates on the stone walls of the Takamatsuzuka and Kitora Tumuli and C. tumbae from black substances on the plastic cover over the “thief hole,” soil and plaster pieces between the stone walls, and the exterior of the Takamatsuzuka Tumulus chamber. Also, molecular phylogenetic placements for the remaining eight Takamatsuzuka and Kitora Tumuli isolates of chaetothyrialean black fungi have been determined or suggested.     

Preparation of protected peptide amides using the Fmoc chemical protocol. Comparison of resins for solid phase synthesis.

Different resins were examined for their potential use in the solid phase synthesis of protected peptide amides using the 9-fluorenylmethoxycarbonyl (Fmoc) chemical protocol. The model protected peptide amide BocTyr-Gly-Gly-Phe-Leu-Arg(Pmc)NH2 (1) was synthesized on both the acid-labile 4-(2',4'-dimethoxyphenyl-Fmoc-aminomethyl)phenoxy resin (Rink amide resin) (2) and on resins containing the base-labile linker 4-hydroxymethylbenzoic acid. Of the resins examined only the methylbenzhydrylamine resin containing the 4-hydroxymethylbenzoic acid linkage, which was cleaved by ammonolysis in isopropanol, gave the model peptide 1 in good overall yield (53% including functionalization). Thus the synthesis of protected peptide amides by solid phase synthesis using Fmoc-protected amino acids with t-butyl-type side chain protecting groups is feasible. The choice of peptide-resin linkage and its cleavage conditions, however, are critical to the success of such syntheses. The potential application of this synthetic strategy to the preparation of novel peptide amides is discussed.     

Effect of disinfection and storage on the flexural strength of ocular prosthetic acrylic resins

doi: 10.1111/j.1741‐2358.2011.00570.x Effect of disinfection and storage on the flexural strength of ocular prosthetic acrylic resins Objective: To evaluate the influence of chemical disinfection and storage duration on the flexural strength of acrylic resins commonly used to make ocular prostheses. Methods: A total of 260 samples were manufactured with N1 resin and colourless resin. Both resins were thermopolymerised using a microwave oven. Samples were stored and periodically disinfected and were divided into groups: control (no disinfection) (I), neutral soap (II), Opti‐free (III), Efferdent (IV), 1% hypochlorite (V) or 4% chlorhexidine (VI). The flexural strength was measured before and after 60 and 120 days of storage. Data were analysed by anova and Tukey test (0.05). Results: The flexural strength of the N1 resin was higher than that for the colourless resin. There was a significant difference in the flexural strength before and after 60 and 120 days of storage with disinfection, regardless of the resin and disinfectant. Group I in the initial period exhibited greater flexural strength, with significant difference only in group VI after 120 days. Conclusion: It can be concluded that the flexural strength only changed after 120 days of storage for samples disinfected with chlorhexidine. However, all flexural strength values obtained herein were acceptable clinical limits for the acrylic resins.     

Bacterial degradation of acrylic oligomers and polymers

Three bacterial strains that assimilate acrylic trimer as a carbon and energy source were isolated from activated sludge and soil samples and were tentatively identified as Microbacterium sp. II-7-12, Xanthomonas maltophilia W1 and Acinetobacter genospecies 11 W2. They could assimilate acrylic monomer, dimer and trimer, but not polymers. Trimer, 0.2%, was completely consumed in 3 days. The culture filtrate became alkaline during bacterial growth. From the values of biological O₂ consumption versus theoretical O₂ consumption towards oligomers and polymers, biodegradation of acrylic polymers by trimer-utilizing bacteria was suggested. The resting cells of three bacteria grown on trimer degraded acrylic polymers (average relative molecular mass of 1000–4500) at a concentration of 100 ppm (0.01%). The biodegradation rate of acrylic polymer by resting cells was calculated to be approximately 1/120 of that of acrylic trimer. Acyl-CoA synthetase activities towards oligomeric or polymeric acrylates were found with cell-free extracts of the three bacteria.     

Feasibility of bioremediation by white-rot fungi

The ligninolytic enzymes of white-rot fungi have a broad substrate specificity and have been implicated in the transformation and mineralization of organopollutants with structural similarities to lignin. This review presents evidence for the involvement of these enzymes in white-rot fungal degradation of munitions waste, pesticides, polychlorinated biphenyls, polycyclic aromatic hydrocarbons, bleach plant effluent, synthetic dyes, synthetic polymers, and wood preservatives. Factors relating to the feasibility of using white-rot fungi in bioremediation treatments for organopollutants are discussed.     

Effect of autoclave postpolymerization treatments on the fracture toughness of autopolymerizing dental acrylic resins

Introduction: Microwave and water bath postpolymerization have been suggested as methods to improve the mechanical properties of heat and autopolymerizing acrylic resins. However, the effects of autoclave heating on the fracture properties of autopolymerizing acrylic resins have not been investigated. Purpose: The aim of this study was to assess the effectiveness of various autoclave postpolymerization methods on the fracture properties of 3 different autopolymerizing acrylic resins. Methods: Forty-two specimens of 3 different autopolymerizing acrylic resins (Orthocryl, Paladent RR and Futurajet) were fabricated (40x8x4mm), and each group was further divided into 6 subgroups (n=7). Control group specimens remained as processed (Group 1). The first test group was postpolymerized in a cassette autoclave at 135°C for 6 minutes and the other groups were postpolymerized in a conventional autoclave at 130°C using different time settings (5, 10, 20 or 30 minutes). Fracture toughness was then measured with a three-point bending test. Data were analyzed by ANOVA followed by the Duncan test (α=0.05). Results: The fracture toughness of Orthocryl and Paladent-RR acrylic resins significantly increased following conventional autoclave postpolymerization at 130°C for 10 minutes (P<.05). However, the fracture toughness of autoclave postpolymerized Futurajet was not significantly different than its control specimens (P<.05). The fracture toughness of Futurajet was significantly less than Paladent RR and Orthocryl specimens when autoclaved at 130°C for 10 minutes. Conclusions: Within the limitations of this study, it can be suggested that autoclave postpolymerization is an effective method for increasing the fracture toughness of tested autoploymerized acrylic resins.     

Biodeterioration of natural stone with special reference to nitrifying bacteria

An evaluation of field data from historical buildings in Germany showed that chemoorganotrophic bacteria are the most numerous microorganisms in building stones, followed by fungi and nitrifying bacteria. Chemoorganotrophic bacteria and fungi were present in almost every sample. Ammonia and nitrite oxidizers were found in 55 and 62% of the samples, respectively. Within months, natural stone was colonized by chemoorganotrophic microorganisms. The highest cell numbers were usually found near the surface. The colonization of natural stone by nitrifying bacteria took several years. The highest cell numbers were in some cases found underneath the surface. Nitrifying bacteria showed a preference for calcareous material with a medium pore radius between 1 and 10 m. Cell numbers of nitrifying bacteria did not correlate to the nitrate content of the stone material. We demonstrated that the stone inhabiting microflora can cause significant loss of nitrate by denitrification. Our data strongly suggested that microbial colonization of historical buildings was enhanced by anthropogenic air pollution. Samples taken from stone material with a pore radius 1 m had significantly higher cell numbers when they were covered with black crusts. A comparison of samples taken between 1990–1995 from buildings throughout Germany showed that in eastern Germany a significantly stronger colonization with facultatively methylotrophic bacteria and nitrifying bacteria existed. The same was true for natural stone from an urban exposure site when compared to material from a rural exposure site. Data from outdoor exposure and laboratory simulation experiments indicated that the colonization of calcareous stone by nitrifying bacteria was enhanced by chemical weathering.     

羧基化聚丙烯酸酯接枝邻甲酚环氧丙烯酸树脂的合成

采用JF-220环氧树脂和丙烯酸反应合成邻甲酚环氧丙烯酸树脂(JFA),再将其和羧基化聚丙烯酸酯进一步反应制备羧基化聚丙烯酸酯接枝邻甲酚环氧丙烯酸树脂(CAJFA)。研究了催化剂、阻聚剂和反应温度对合成反应的影响,确定了每步反应的最佳合成条件,并且对JF-220树脂、JFA树脂和CAJFA树脂的结构进行了IR表征。     

Functions of the coacervate droplets

Functions of coacervate droplets as protocells are studied by using synthetic polymers. The coacervate droplets were made from PVA-A and PVA-S. When glycine or diglycine were in the surrounding medium, the coacervate droplets concentrated them. The concentration of glycine in the coacervate droplets was higher than that of diglycine. When this mixture was irradiated by UV light, the coacervate droplets protected them from the photochemical decomposition.     

LR Gold embedding of nervous tissue for immunoelectron microscopy studies

Summary A major drawback of all acrylic resins commonly used for post-embedding immunocytochemical studies of the central nervous system is the disruption of the ultrastructural morphology, due to the high lipid content of neural tissue. We have investigated the suitability of the acrylic resin LR Gold, which has been employed recently for immunogold labeling studies in several non-neural tissues. Optimal preservation of both antigenicity and ultrastructure of nervous tissue was obtained after en bloc staining with uranyl acetate, followed by total dehydration in acetone and curing at low temperature. Cell membranes and myelin sheaths, which are usually lost with other acrylic resins, were well maintained. The degree of antigenicity of LR Gold-embedded tissues was comparable to that of LR White-embedded one, but the morphologic detail was much better preserved. The use of LR Gold is particularly advantageous for studying neurodegenerative disorders such as Alzheimer disease.     

The Field of Art Production and Western Desert Acrylics1

Following the logic of Bourdieu's notion of ‘field’, acrylic art production in the Western Desert of Australia is positioned as a sub‐field in the field of Western art production. The significance of the cultural identity of the producer subordinates Western Desert acrylic art within the field and the shift in the criteria of legitimation constitutes it as a sub‐field. The capital at stake in the sub‐field of Western Desert acrylic art is differentiated and contingent upon legitimation of authenticity as defined by the Western field of art production. This capital is constituted through the positioning of Western Desert acrylics within the field of art production and is a manifestation of the struggle to maintain domination within the field.     

LR Gold embedding of nervous tissue for immunoelectron microscopy studies.

A major drawback of all acrylic resins commonly used for post-embedding immunocytochemical studies of the central nervous system is the disruption of the ultrastructural morphology, due to the high lipid content of neural tissue. We have investigated the suitability of the acrylic resin LR Gold, which has been employed recently for immunogold labeling studies in several non-neural tissues. Optimal preservation of both antigenicity and ultrastructure of nervous tissue was obtained after en bloc staining with uranyl acetate, followed by total dehydration in acetone and curing at low temperature. Cell membranes and myelin sheaths, which are usually lost with other acrylic resins, were well maintained. The degree of antigenicity of LR Gold-embedded tissues was comparable to that of LR White-embedded one, but the morphologic detail was much better preserved. The use of LR Gold is particularly advantageous for studying neurodegenerative disorders such as Alzheimer disease.