Control of Cre recombination by regulatory elements from Xer recombination systems

Site-specific recombination by the Cre recombinase takes place at a simple DNA site (loxP), requires no additional proteins and gives topologically simple recombination products. In contrast, cer and psi sites for Xer recombination contain approximately 150 bp of accessory sequences, require accessory proteins PepA, ArgR and ArcA, and the products are specifically linked to form a four-noded catenane. Here, we use hybrid sites consisting of accessory sequences of cer or psi fused to loxP to probe the function of accessory proteins in site-specific recombination. We show that PepA instructs Cre to produce four-noded catenane, but is not required for recombination at these hybrid sites. Mutants of Cre that require PepA and accessory sequences for efficient recombination were selected. PepA-dependent Cre gave products with a specific topology and displayed resolution selectivity. Our results reveal that PepA acts autonomously in the synapsis of psi and cer accessory sequences and is the main architectural element responsible for intertwining accessory site DNA. We suggest that accessory proteins can activate recombinases simply by synapsing the regulatory DNA sequences, thus bringing the recombination sites together with a specific geometry. This may occur without the need for protein-protein interactions between accessory proteins and the recombinases.     

Xer-mediated site-specific recombination in vitro.

The Xer site-specific recombination system acts at ColE1 cer and pSC101 psi sites to ensure that these plasmids are in a monomeric state prior to cell division. We show that four proteins, ArgR, PepA, XerC and XerD are necessary and sufficient for recombination between directly repeated cer sites on a supercoiled plasmid in vitro. Only PepA, XerC and XerD are required for recombination at psi in vitro. Recombination at cer and psi in vitro requires negative supercoiling and is exclusively intramolecular. Strand exchange at cer produces Holliday junction-containing products in which only the top strands have been exchanged. This reaction requires the catalytic tyrosine residue of Xer C but not that of XerD. Recombination at psi gives catenated circular resolution products. Strand exchange at psi is sequential. XerC catalyses the first (top) strand exchange to make a Holiday junction intermediate and XerD catalyses the second (bottom) strand exchange.     

Topology of Xer recombination on catenanes produced by lambda integrase.

Xer site-specific recombination at the psi site from plasmid pSC101 displays topological selectivity, such that recombination normally occurs only between directly repeated sites on the same circular DNA molecule. This intramolecular selectivity is important for the biological role of psi, and is imposed by accessory proteins PepA and ArcA acting at accessory DNA sequences adjacent to the core recombination site. Here we show that the selectivity for intramolecular recombination at psi can be bypassed in multiply interlinked catenanes. Xer site-specific recombination occurred relatively efficiently between antiparallel psi sites located on separate rings of right-handed torus catenanes containing six or more nodes. This recombination introduced one additional node into the catenanes. Antiparallel sites on four-noded right-handed catenanes, the normal product of Xer recombination at psi, were not recombined efficiently. Furthermore, parallel psi sites on right-handed torus catenanes were not substrates for Xer recombination. These findings support a model in which psi sites are plectonemically interwrapped, trapping a precise number of supercoils that are converted to four catenation nodes by Xer strand exchange.     

Accessory factors determine the order of strand exchange in Xer recombination at psi

Xer site-specific recombination in Escherichia coli converts plasmid multimers to monomers, thereby ensuring their correct segregation at cell division. Xer recombination at the psi site of plasmid pSC101 is preferentially intramolecular, giving products of a single topology. This intramolecular selectivity is imposed by accessory proteins, which bind at psi accessory sequences and activate Xer recombination at the psi core. Strand exchange proceeds sequentially within the psi core; XerC first exchanges top strands to produce Holliday junctions, then XerD exchanges bottom strands to give final products. In this study, recombination was analysed at sites in which the psi core was inverted with respect to the accessory sequences. A plasmid containing two inverted-core psi sites recombined with a reversed order of strand exchange, but with unchanged product topology. Thus the architecture of the synapse, formed by accessory proteins binding to accessory sequences, determines the order of strand exchange at psi. This finding has important implications for the way in which accessory proteins interact with the recombinases.     

Direct interaction of aminopeptidase A with recombination site DNA in Xer site-specific recombination.

Xer site-specific recombination at ColE1 cer converts plasmid multimers into monomers, thus ensuring the heritable stability of ColE1. Two related recombinase proteins, XerC and XerD, catalyse the strand exchange reaction at a 30 bp recombination core site. In addition, two accessory proteins, PepA and ArgR, are required for recombination at cer. These two accessory proteins are thought to act at 180 bp of accessory sequences adjacent to the cer recombination core to ensure that recombination only occurs between directly repeated sites on the same molecule. Here, we demonstrate that PepA and ArgR interact directly with cer, forming a complex in which the accessory sequences of two cer sites are interwrapped approximately three times in a right-handed fashion. We present a model for this synaptic complex, and propose that strand exchange can only occur after the formation of this complex.     

Structural plasmid evolution as a result of coupled recombinations at bom and cer sites

We have studied the recombination of plasmids bearing bom and cer sites. The bom ( basis of mobilization) site is required for conjugative transfer, while the cer ( Col E1 resolution) site is involved in the resolution of plasmid multimers, which increases plasmid stability. We constructed a pair of parent plasmids in such a way as to allow us select clones containing recombinant plasmids directly. Clone selection was based on the McrA sensitivity of recipient host DNA modified by M. Ecl18kI, which is encoded by one of the parent plasmids. The recombinant plasmid contains segments originating from both parental DNAs, which are bounded by bom and cer sites. Its structure is in accordance with our previously proposed model for recombination mediated by bom and cer sequences. The frequency of recombinant plasmid formation coincided with the frequency of recombination at the bom site. We also show that bom-mediated recombination in trans, unlike in cis, is independent of other genetic determinants on the conjugative plasmids.     

Lipooligosaccharide biosynthesis in Neiseria gonorrhoeae: cloning, identification and characterization of the α1,5 heptosyltransferase I gene (rfaC)

The Escherichia coli arginine repressor (ArgR) is an l -arginine-dependent DNA-binding protein that controls expression of the arginine biosynthetic genes and is required as an accessory protein in Xer site-specific recombination at cer and related recombination sites in plasmids. Site-directed mutagenesis was used to isolate two mutants of E. coli ArgR that were defective in arginine binding. Results from in vivo and in vitro experiments demonstrate that these mutants still act as repressors and bind their specific DNA sequences in an arginine-independent manner. Both mutants support Xer site-specific recombination at cer. One of the mutant proteins was purified and shown to bind to its DNA target sequences in vitro with different affinity and as a different molecular species to wild-type ArgR.     

Peptidase activity of Escherichia coli aminopeptidase A is not required for its role in Xer site-specific recombination

Xer site-specific recombination is required for the stable inheritance of multicopy plasmids and the normal segregation of the bacterial chromosome in Escherichia coli.Two related recombinases and two accessory proteins are essential for Xer-mediated recombination at cer, a recombination site in the plasmid ColE1 The accessory proteins, ArgR and PepA, function in ensuring that the Xer recombination reaction acts exclusively intramolecularly, converting plasmid dimers into monomers and not vice versa. PepA is an amino-exopeptidase, but its molecular role in the Xer recombination mechanism is unclear. Here we show that a mutation directed at the presumptive active site of PepA creates a protein with no detectable peptidase activity in vitro or in vivo, but which still functions normality in Xer site-specific recombination at cer.     

FtsK-dependent and -independent pathways of Xer site-specific recombination.

Homologous recombination between circular chromosomes generates dimers that cannot be segregated at cell division. Escherichia coli Xer site-specific recombination converts chromosomal and plasmid dimers to monomers. Two recombinases, XerC and XerD, act at the E. coli chromosomal recombination site, dif, and at related sites in plasmids. We demonstrate that Xer recombination at plasmid dif sites occurs efficiently only when FtsK is present and under conditions that allow chromosomal dimer formation, whereas recombination at the plasmid sites cer and psi is independent of these factors. We propose that the chromosome dimer- and FtsK-dependent process that activates Xer recombination at plasmid dif also activates Xer recombination at chromosomal dif. The defects in chromosome segregation that result from mutation of the FtsK C-terminus are attributable to the failure of Xer recombination to resolve chromosome dimers to monomers. Conditions that lead to FtsK-independent Xer recombination support the hypothesis that FtsK acts on Holliday junction Xer recombination intermediates.     

Communication between accessory factors and the Cre recombinase at hybrid psi-loxP sites

By placing loxP adjacent to the accessory sequences from the Xer/psi multimer resolution system, we have imposed topological selectivity and specificity on Cre/loxP recombination. In this hybrid recombination system, the Xer accessory protein PepA binds to psi accessory sequences, interwraps them, and brings the loxP sites together such that the product of recombination is a four-node catenane. Here, we investigate communication between PepA and Cre by varying the distance between loxP and the accessory sequences, and by altering the orientation of loxP. The yield of four-node catenane and the efficiency of recombination in the presence of PepA varied with the helical phase of loxP with respect to the accessory sequences. When the orientation of loxP was reversed, or when half a helical turn was added between the accessory sequences and loxP, PepA reversed the preferred order of strand exchange by Cre at loxP. The results imply that PepA and the accessory sequences define precisely the geometry of the synapse formed by the loxP sites, and that this overcomes the innate preference of Cre to initiate recombination on the bottom strand of loxP. Further analysis of our results demonstrates that PepA can stimulate strand exchange by Cre in two distinct synaptic complexes, with the C-terminal domains of Cre facing either towards or away from PepA. Thus, no specific PepA-recombinase interaction is required, and correct juxtaposition of the loxP sites is sufficient to activate Cre in this system.     

Polyphosphate kinase is a component of the Escherichia coli RNA degradosome

Xer site-specific recombination functions in the stable inheritance of circular plasmids and bacterial chromosomes. Two related recombinases, XerC and XerD, mediate this recombination, which 'undoes' the potential damage of homologous recombination. Xer recombination on natural plasmid sites is preferentially intramolecular, converting plasmid multimers to monomers. In contrast, recombination at the Escherichia coli recombination site, dif , occurs both intermolecularly and intramolecularly, at least when dif is inserted into a multicopy plasmid. Here the DNA sequence features of a family of core recombination sites in which the XerC- and XerD-binding sites, which are separated by 6 bp, were analysed in order to ascertain what determines whether recombination will be preferentially intramolecular, or will occur both within and between molecules. Sequence changes in either the XerC- or XerD-binding site can alter the recombination outcome. Preferential intramolecular recombination between a pair of recombination sites requires additional accessory DNA sequences and accessory recombination proteins and is correlated with reduced affinities of recombinase binding to recombination core sites, reduced XerC-mediated cleavage in vitro , and an apparent increased overall bending in recombinase–core-site complexes.     

Derivatives of ColE1 cer show altered topological specificity in site-specific recombination.

ColE1 contains a 250-bp sequence (cer) which is required in cis for the conversion of plasmid dimers to monomers. Recombination between cer and parB (a dimer resolution site from plasmid CloDF13) occurs in vivo at low frequency. The properties of the resulting hybrid sites have been studied. The type I hybrid closely resembles wild-type cer. It supports intramolecular recombination and requires the products of the chromosomal xerA, xerB and xerC genes together with the 250-bp site. In contrast, the type II hybrid (although differing from type I by only 2 bp) functions independently of the topological relationship of the participating sites, supporting both inter- and intramolecular recombination. Furthermore, recombination between type II sites is independent of the products of the xerA and xerB genes and requires a site of less than 50 bp.     

Site-specific recombination between ColE1 tcer and NTP16 nmr sites in vivo

The site-specific recombination system used by multicopy plasmids of the ColE1 family uses two identical plasmid-encoded recombination sites and four bacterial proteins to catalyze the recombination reaction. In the case of the Escherichia coli plasmid ColE1, the recombination site, cer, is a 280 by DNA sequence which is acted on by the products of the argR, pepA, xerC and xerD genes. We have constructed a model system to study this recombination system, using tandemly repeated recombination sites from the plasmids ColE1 and NTP16. These plasmids have allowed us precisely to define the region of strand exchange during site-specific recombination, and to derive a model for cer intramolecular site-specific recombination.     

Site-specific recombination between ColE1 tcer and NTP16 nmr sites in vivo

The site-specific recombination system used by multicopy plasmids of the ColE1 family uses two identical plasmid-encoded recombination sites and four bacterial proteins to catalyze the recombination reaction. In the case of the Escherichia coli plasmid ColE1, the recombination site, cer, is a 280 by DNA sequence which is acted on by the products of the argR, pepA, xerC and xerD genes. We have constructed a model system to study this recombination system, using tandemly repeated recombination sites from the plasmids ColE1 and NTP16. These plasmids have allowed us precisely to define the region of strand exchange during site-specific recombination, and to derive a model for cer intramolecular site-specific recombination.     

Plasmid pSC101 harbors a recombination site, psi, which is able to resolve plasmid multimers and to substitute for the analogous chromosomal Escherichia coli site dif.

Plasmid pSC101 harbors a 28-bp sequence which is homologous to dif, the target site of the XerC/XerD-dependent recombination system in Escherichia coli. Using a technique which allows very sensitive detection of plasmid loss, we show that recombination at this site, termed psi for pSC101 stabilized inheritance, causes a moderate increase in pSC101 stability. The role of the psi sequence in site-specific recombination has been explored in two other contexts. It was cloned in a derivative of plasmid p15A and inserted into the chromosome in place of dif. In the first situation, psi activity requires accessory sequences and results in multimer resolution; in the second situation, it suppresses the effects of the dif deletion and can promote intermolecular exchanges. Thus, psi is a site whose recombinational activity depends on the context, the first in the cer/dif family known to exhibit such flexibility.     

A site-specific recombination function in Staphylococcus aureus plasmids.

All known small staphylococcal plasmids possess one or two recombination sites at which site-specific cointegrate formation occurs. One of these sites, RSA, is present on two small multicopy plasmids, pT181 and pE194; it consists of 24 base pairs of identity in the two plasmids, the "core," flanked by some 50 base pairs of decreasing homology. Here we show that recombination at RSA is recA independent and is mediated by a plasmid-encoded, trans-acting protein, Pre (plasmid recombination). Pre-mediated recombination is site specific in that it occurs within the core sequence of RSA in a recA1 host. Recombination also occurs between two intramolecular RSA sites. Unlike site-specific recombination systems encoded by other plasmids, Pre-RSA is not involved in plasmid maintenance.     

Characterization of pECL18 and pKPN2: a proposed pathway for the evolution of two plasmids that carry identical genes for a Type II restriction-modification system

The primary structures of the plasmids pECL18 (5571 bp) and pKPN2 (4196 bp) from Escherichia coli and Klebsiella pneumoniae, respectively, which carry genes for a Type II restriction-modification system (RMS2) with the specificity 5'-CCNGG-3', were determined in order to elucidate the structural relationship between them. The data suggest a possible role for recombination events at bom (basis of mobility) regions and the sites of resolution of multimer plasmid forms (so-called cer sequences) in the structural evolution of multicopy plasmids. Analysis of the sequences of pECL18 and pKPN2 showed that the genes for RM* Ecl18kI and RM* Kpn2kI, and the sequences of the rep (replication) regions in the two plasmids, are almost identical. In both plasmids, these regions are localized between the bom regions and the cer sites. The rest of the pECL18 sequence is almost identical to that of the mob (mobilization) region of ColE1, and the corresponding segment of pKPN2 is almost identical to part of pHS-2 from Shigella flexneri. The difference in primary structures results in different mobilization properties of pECL18 and pKPN2. The complete sequences of pECL18, pKPN2 and the pairwise comparison of the sequences of pECL18, pKPN2, ColE1 and pHS-2 suggest that plasmids may exchange DNA units via site-specific recombination events at bom and cer sites. In the course of BLASTN database searches using the cer sites of pECL18 and pKPN2 as queries, we found twenty cer sites of natural plasmids. Alignment of these sequences reveals that they fall into two classes. The plasmids in each group possess related segments between their cer and bom sites.     

ArgR and PepA, accessory proteins for XerCD-mediated resolution of ColE1 dimers, are also required for stable maintenance of the P1 prophage

Dimers of low copy number plasmids must be resolved to monomers to prevent interference with active partition. For the P1 prophage this is achieved by the Cre site-specific recombinase acting at lox. Multimerisation of multicopy plasmids threatens stability via copy number depression, and multimers of ColE1 are resolved by XerCD-mediated recombination at cer. Xer-cer is constrained to multimer resolution by accessory proteins ArgR and PepA. Recently, it has been shown that ArgR and PepA influence Cre-mediated recombination at a cer-lox hybrid site in vitro, defining the structure of the synaptic complex. We show here that both ArgR and PepA are required for stable maintenance of the P1 prophage. It is extremely difficult to establish P1 in a strain lacking PepA and the prophage was lost rapidly once selection was removed. ArgR plays a less crucial role although its absence significantly increased prophage loss. The effect of the accessory proteins is seen only at physiological concentrations of Cre; when the recombinase is expressed from a multicopy plasmid, the prophage is unstable even in the presence of ArgR and PepA. We propose that ArgR and PepA are involved in Cre-lox recombination in vivo, probably by constraining the system to resolution of prophage dimers.