Cloning the amidase gene from Rhodococcus rhodochrous M18 and its expression in Escherichia coli

The amidase gene from Rhodococcus rhodochrous M18 was cloned by PCR amplification with primers developed by use of peptide amino acid sequences obtained after treating amidase with trypsin. Nucleotide sequence analysis of this gene revealed high homology with aliphatic amidases from R. erythropolis R312 and Pseudomonas aeruginosa. Considering the substrate specificity and the results of DNA analysis, amidase from R. rhodochrous M8 was assigned to the group of aliphatic amidases preferentially hydrolyzing short-chain aliphatic amides. The amidase gene was expressed in cells of Escherichia coli from the self promoter and from the lac promoter. To clone a fragment of R. rhodochrous M8 chromosome (approximately 9 kb), containing the entire structural gene and its flanking regions, plasmid pRY1 that can be integrated into the chromosome via homology regions was used. No sequences of the nitrile hydratase gene, the second key gene of nitrile degradation in strain R. rhodochrous M8, were detected. Thus, genes encoding amidase and nitrile hydratase in strain R. rhodochrous M8 are not organized into a single operon despite their common regulation.     

The respiratory activity of Rhodococcus rhodochrous M8 cells producing nitrile-hydrolyzing enzymes]

The respiratory activity of Rhodococcus rhodochrous M8 cells containing nitrile hydratase and amidase was studied in the presence of nitriles and amides of carbonic acids. Culturing of cells with acrylonitrile and acrylamide yielding their maximum respiratory activity was studied. The optimum conditions for measurements and maintenance of respiratory activity were found. Curves for the linear concentration dependence of cell respiratory activity on 0.01-0.5 mM acrylonitrile, 0.025-1.0 mM acetonitrile, and 0.01-0.1 mM acrylamide were plotted. The selectivity of cell respiratory activity for some substrates was analyzed.     

A novel amidase (half-amidase) for half-amide hydrolysis involved in the bacterial metabolism of cyclic imides

A novel amidase involved in bacterial cyclic imide metabolism was purified from Blastobacter sp. strain A17p-4. The enzyme physiologically functions in the second step of cyclic imide degradation, i.e., the hydrolysis of monoamidated dicarboxylates (half-amides) to dicarboxylates and ammonia. Enzyme production was enhanced by cyclic imides such as succinimide and glutarimide but not by amide compounds which are conventional substrates and inducers of known amidases. The purified amidase showed high catalytic efficiency toward half-amides such as succinamic acid (K(m) = 6.2 mM; k(cat) = 5.76 s(-1)) and glutaramic acid (K(m) = 2.8 mM; k(cat) = 2.23 s(-1)). However, the substrates of known amidases such as short-chain (C(2) to C(4)) aliphatic amides, long-chain (above C(16)) aliphatic amides, amino acid amides, aliphatic diamides, alpha-keto acid amides, N-carbamoyl amino acids, and aliphatic ureides were not substrates for the enzyme. Based on its high specificity toward half-amides, the enzyme was named half-amidase. This half-amidase exists as a monomer with an M(r) of 48,000 and was strongly inhibited by heavy metal ions and sulfhydryl reagents.     

A novel aryl acylamidase from Nocardia farcinica hydrolyses polyamide

An alkali stable polyamidase was isolated from a new strain of Nocardia farcinica. The enzyme consists of four subunits with a total molecular weight of 190 kDa. The polyamidase cleaved amide and ester bonds of water insoluble model substrates like adipic acid bishexylamide and bis(benzoyloxyethyl)terephthalate and hydrolyzed different soluble amides to the corresponding acid. Treatment of polyamide 6 with this amidase led to an increased hydrophilicity based on rising height and tensiometry measurements and evidence of surface hydrolysis of polyamide 6 is shown. In addition to amidase activity, the enzyme showed activity on p-nitrophenylbutyrate. On hexanoamide the amidase exhibited a K(m) value of 5.5 mM compared to 0.07 mM for p-nitroacetanilide. The polyamidase belongs to the amidase signature family and is closely related to aryl acylamidases from different strains/species of Nocardia and to the 6-aminohexanoate-cyclic dimer hydrolase (EI) from Arthrobacter sp. KI72.     

S-stereoselective piperazine-2-tert-butylcarboxamide hydrolase from Pseudomonas azotoformans IAM 1603 is a novel L-amino acid amidase.

An amidase acting on (R,S)-piperazine-2-tert-butylcarboxamide was purified from Pseudomonas azotoformans IAM 1603 and characterized. The enzyme acted S-stereoselectively on (R,S)-piperazine-2-tert-butylcarboxamide to yield (S)-piperazine-2-carboxylic acid. N-terminal and internal amino acid sequences of the enzyme were determined. The gene encoding the S-stereoselective piperazine-2-tert-butylcarboxamide amidase was cloned from the chromosomal DNA of the strain and sequenced. Analysis of 2.1 kb of genomic DNA revealed the presence of two ORFs, one of which (laaA) encodes the amidase. This enzyme, LaaA is composed of 310 amino acid residues (molecular mass 34 514 Da), and the deduced amino acid sequence exhibits significant similarity to hypothetical and functionally characterized proline iminopeptidases from several bacteria. The laaA gene modified in the nucleotide sequence upstream from its start codon was overexpressed in Escherichia coli. The activity of the recombinant LaaA enzyme in cell-free extracts of E. coli was 13.1 units.mg(-1) with l-prolinamide as substrate. This enzyme was purified to electrophoretic homogeneity by ammonium sulfate fractionation and two column chromatography steps. On gel-filtration chromatography, the enzyme appeared to be a monomer with a molecular mass of 32 kDa. It had maximal activity at 45 degrees C and pH 9.0, and was completely inactivated in the presence of phenylhydrazine, Zn2+, Ag+, Cd2+ or Hg2+. LaaA had hydrolyzing activity toward L-amino acid amides such as L-prolinamide, L-proline-p-nitroanilide, L-alaninamide and L-methioninamide, but did not act on the peptide substrates for the proline iminopeptidases despite their sequence similarity to LaaA. The enzyme also acted S-stereoselectively on (R,S)-piperidine-2-carboxamide, (R,S)-piperazine-2-carboxamide and (R,S)-piperazine-2-tert-butylcarboxamide. Based on its specificity towards L-amino acid amides, the enzyme was named L-amino acid amidase. E. coli transformants overexpressing the laaA gene could be used for the S-stereoselective hydrolysis of (R,S)-piperazine-2-tert-butylcarboxamide.     

Aliphatic Amidase from <Emphasis Type="Italic">Rhodococcus rhodochrous</Emphasis> M8 Is Related to the Nitrilase/Cyanide Hydratase Family

A comparative study of amino acid sequence and physicochemical properties indicates the affiliation of an amidase from Rhodococcus rhodochrous M8 (EC 3.5.1.4) to the nitrilase/cyanide hydratase family. Cluster analysis and multiple alignments show that Cys166 is an active site nucleophile. The enzyme has been shown to be a typical aliphatic amidase, being the most active toward short-chain linear amides. Small polar molecules such as hydroxylamine and O-methyl hydroxylamine can serve as effective external nucleophiles in acyl transfer reactions. The kinetics of the industrially important amidase-catalyzed acrylamide hydrolysis has been studied over a wide range of substrate concentrations; inhibition during enzymatic hydrolysis by the substrate and product (acrylic acid) has been observed; an adequate kinetic scheme has been evaluated and the corresponding kinetic parameters have been determined.     

R-stereoselective amidase from Rhodococcus erythropolis No. 7 acting on 4-chloro-3-hydroxybutyramide

Ethyl (S)-4-chloro-3-hydroxybutyrate is an intermediate for the synthesis of Atorvastatin, a chiral drug used for hypercholesterolemia. A Rhodococcus erythropolis strain (No. 7) able to convert 4-chloro-3-hydroxybutyronitrile into 4-chloro-3-hydroxybutyric acid has recently been isolated from soil. This activity has been regarded as having been caused by the successive actions of the nitrile hydratase and amidase. In this instance, the corresponding amidase gene was cloned from the R. erythropolis strain and expressed in Escherichia coli cells. A soluble active form of amidase enzyme was obtained at 18 degrees . The Ni column-purified recombinant amidase was found to have a specific activity of 3.89 U/mg toward the substrate isobutyramide. The amidase was found to exhibit a higher degree of activity when used with midchain substrates than with short-chain ones. Put differently, amongst the various amides tested, isobutyramide and butyramide were found to be hydrolyzed the most rapidly. In addition to amidase activity, the enzyme was found to exhibit acyltransferase activity when hydroxyl amine was present. This dual activity has also been observed in other enzymes belonging to the same amidase group (E.C. 3.5.1.4). Moreover, the purified enzyme was proven to be able to enantioselectively hydrolyze 4-chloro-3-hydroxybutyramide into the corresponding acid. The e.e. value was measured to be 52% when the conversion yield was 57%. Although this e.e. value is low for direct commercial use, molecular evolution could eventually result in this amidase being used as a biocatalyst for the production of ethyl (S)-4-chloro-3-hydroxybutyrate.     

L-selective amidase with extremely broad substrate specificity from Ochrobactrum anthropi NCIMB 40321

An industrially attractive L-specific amidase was purified to homogeneity from Ochrobactrum anthropi NCIMB 40321 wild-type cells. The purified amidase displayed maximum initial activity between pH 6 and 8.5 and was fully stable for at least 1 h up to 60 degrees C. The purified enzyme was strongly inhibited by the metal-chelating compounds EDTA and 1,10-phenanthroline. The activity of the EDTA-treated enzyme could be restored by the addition of Zn2+ (to 80%), Mn2+ (to 400%), and Mg2+ (to 560%). Serine and cysteine protease inhibitors did not influence the purified amidase. This enzyme displayed activity toward a broad range of substrates consisting of alpha-hydrogen- and (bulky) alpha,alpha-disubstituted alpha-amino acid amides, alpha-hydroxy acid amides, and alpha-N-hydroxyamino acid amides. In all cases, only the L-enantiomer was hydrolyzed, resulting in E values of more than 150. Simple aliphatic amides, beta-amino and beta-hydroxy acid amides, and dipeptides were not converted. The gene encoding this L-amidase was cloned via reverse genetics. It encodes a polypeptide of 314 amino acids with a calculated molecular weight of 33,870. Since the native enzyme has a molecular mass of about 66 kDa, it most likely has a homodimeric structure. The deduced amino acid sequence showed homology to a few other stereoselective amidases and the acetamidase/formamidase family of proteins (Pfam FmdA_AmdA). Subcloning of the gene in expression vector pTrc99A enabled efficient heterologous expression in Escherichia coli. Altogether, this amidase has a unique set of properties for application in the fine-chemicals industry.     

Physical, biochemical, and immunological characterization of a thermostable amidase from Klebsiella pneumoniae NCTR 1.

An amidase capable of degrading acrylamide and aliphatic amides was purified to apparent homogeneity from Klebsiella pneumoniae NCTR 1. The enzyme is a monomer with an apparent molecular weight of 62,000. The pH and temperature optima of the enzyme were 7.0 and 65 degrees C, respectively. The purified amidase contained 11 5,5-dithiobis(2-nitrobenzoate) (DTNB)-titratable sulfhydryl (SH) groups. In the native enzyme 1.0 SH group readily reacted with DTNB with no detectable loss of activity. Titration of the next 3.0 SH groups with DTNB resulted in a loss of activity of more than 70%. The remaining seven inaccessible SH groups could be titrated only in the presence of 8 M guanidine hydrochloride. Titration of SH groups was strongly inhibited by carboxymethylation and KMnO4, suggesting the presence of SH groups at the active site(s). Inductively coupled plasma-atomic emission spectrometry analysis indicated that the native amidase contains 0.33 mol of cobalt and 0.33 mol of iron per mol of the native enzyme. Polyclonal antiserum against K. pneumoniae amidase was raised in rabbits, and immunochemical comparisons were made with amidases from Rhodococcus sp., Mycobacterium smegmatis, Pseudomonas chlororaphis B23, and Methylophilus methylotrophus. The antiserum immunoprecipitated and immunoreacted with the amidases of K. pneumoniae and P. chlororaphis B23. The antiserum failed to immunoreact or immunoprecipitate with other amidases.     

The nature of differences in amidase and esterase activities of some acyltrypsins]

Specific trypsin substrates (esters, anilides, amides, peptides) were shown to accelerate deacetylation of monoacetylated trypsin. The amidase activity of monoacetyl-, monopropyonyl-, and tetraformyl-trypsin was not manifested if the amidase activity of native enzyme was suppressed in these preparations by the ester substrates (benzoylarginine ethyl ester or p-nitrophenyl acetate). Therefore the differences in the residual amidase and esterase activities of these acylated trypsin preparations found earlier did not contradict the universality of the acylenzyme mechanism. These differences are due to the strong deacylating effect of specific substrate in its complex with the enzyme modified with nonspecific acyl residue. The latter fact is suggested to be an experimental confirmation of the "induced fit" hypothesis.     

Purification, cloning, and primary structure of a new enantiomer-selective amidase from a Rhodococcus strain: structural evidence for a conserved genetic coupling with nitrile hydratase

A new enantiomer-selective amidase active on several 2-aryl propionamides was identified and purified from a newly isolated Rhodococcus strain. The characterized amidase is an apparent homodimer, each molecule of which has an Mr of 48,554; it has a specific activity of 16.5 mumol of S(+)-2-phenylpropionic acid formed per min per mg of enzyme from the racemic amide under our conditions. An oligonucleotide probe was deduced from limited peptide information and was used to clone the corresponding gene, named amdA. As expected, significant homologies were found between the amino acid sequences of the enantiomer-selective amidase of Rhodococcus sp., the corresponding enzyme from Brevibacterium sp. strain R312, and several known amidases, thus confirming the existence of a structural class of amidase enzymes. Genes probably coding for the two subunits of a nitrile hydratase, albeit in an inverse order, were found 39 bp downstream of amdA, suggesting that such a genetic organization might be conserved in different microorganisms. Although we failed to express an active Rhodococcus amidase in Escherichia coli, even in conditions allowing the expression of an active R312 enzyme, the high-level expression of the active recombinant enzyme could be demonstrated in Brevibacterium lactofermentum by using a pSR1-derived shuttle vector.     

Nitrile hydratase and amidase from Rhodococcus rhodochrous hydrolyze acrylic fibers and granular polyacrylonitriles

Rhodococcus rhodochrous NCIMB 11216 produced nitrile hydratase (320 nkat mg of protein(-1)) and amidase activity (38.4 nkat mg of protein(-1)) when grown on a medium containing propionitrile. These enzymes were able to hydrolyze nitrile groups of both granular polyacrylonitriles (PAN) and acrylic fibers. Nitrile groups of PAN40 (molecular mass, 40 kDa) and PAN190 (molecular mass, 190 kDa) were converted into the corresponding carbonic acids to 1.8 and 1.0%, respectively. In contrast, surfacial nitrile groups of acrylic fibers were only converted to the corresponding amides. X-ray photoelectron spectroscopy analysis showed that 16% of the surfacial nitrile groups were hydrolyzed by the R. rhodochrous enzymes. Due to the enzymatic modification, the acrylic fibers became more hydrophilic and thus, adsorption of dyes was enhanced. This was indicated by a 15% increase in the staining level (K/S value) for C. I. Basic Blue 9.     

Biotransformation of aromatic and heterocyclic amides by amidase of whole cells of Rhodococcus sp. MTB5: Biocatalytic characterization and substrate specificity

In this study, an amidohydrolase activity of amidase in whole cells of Rhodococcus sp. MTB5 has been used for the biotransformation of aromatic, monoheterocyclic and diheterocyclic amides to corresponding carboxylic acids. Benzoic acid, nicotinic acid and pyrazinoic acid are carboxylic acids which have wide industrial applications. The amidase of this strain is found to be inducible in nature. The biocatalytic conditions for amidase present in the whole cells of MTB5 were optimized against benzamide. The enzyme exhibited optimum activity in 50?mM potassium phosphate buffer pH 7.0. The optimum temperature and substrate concentrations for this enzyme were 50?°C and 50?mM, respectively. The enzyme was quite stable for more than 6?h at 30?°C. It showed substrate specificity against different amides, including aliphatic, aromatic and heterocyclic amides. Under optimized reaction conditions, the amidase is capable of converting 50?mM each of benzamide, nicotinamide and pyrazinamide to corresponding acids within 100, 160 and 120?min, respectively, using 5?mg dry cell mass (DCM) per mL of reaction mixture. The respective percent conversion of these amides was 95.02%, 98.00% and 98.44% achieved by whole cells. The amidase in whole cells can withstand as high as 383?mM concentration of product in a reaction mixture and above which it undergoes product feedback inhibition. The results of this study suggest that Rhodococcus sp. MTB5 amidase has the potential for large-scale production of carboxylic acids of industrial value.     

A comparative study of acquired amidase activity in Pseudomonas species

Pseudomonas putida PP3 carrying dehalogenases I and II and Pseudomonas aeruginosa PAU3 carrying dehalogenase I coded for by plasmid pUU2 were able to grow on 2-monochloropropionic acid (2MCPA). Neither strain utilized 2-chloropropionamide (2CPA) as a carbon or nitrogen source for growth. Mutations in both strains to 2Cpa+ phenotypes (designated P. putida PPW3 and P. aeruginosa PAU5, respectively) involved the expression of an acquired 2CPA-amidase activity. The amidase followed by dehalogenase reactions in these strains constituted a novel metabolic pathway for growth on 2CPA. P. putida PPW3 synthesized a constitutive amidase of molecular mass 59 kDa consisting of two identical subunits of 29 kDa. For those amides tested this acquired enzyme was most active against chlorinated aliphatic amides, although substrate affinities (Km) and maximum rates of activity (Vmax) were poor. P. aeruginosa PAU5 acquired a 2Cpa+ phenotype by overproducing the A-amidase normally used by this species to hydrolyse aliphatic amides. The A-amidase had only slight activity towards 2CPA. However, with constitutive synthesis the mutant grew on the chlorinated substrates. Chloroacetamide (CAA) was a toxic substrate analogue for these Pseudomonas strains. A strain resistant to CAA was isolated from P. aeruginosa PAU5 when exposed to 1-10 mM-CAA. This mutant, P. aeruginosa PAU6, synthesized an inducible A-amidase. CAA-resistance depended upon the simultaneous expression of CAA-inducible amidase and dehalogenase activities.     

An amino acid at position 142 in nitrilase from Rhodococcus rhodochrous ATCC 33278 determines the substrate specificity for aliphatic and aromatic nitriles

Nitrilase from Rhodococcus rhodochrous ATCC 33278 hydrolyses both aliphatic and aromatic nitriles. Replacing Tyr-142 in the wild-type enzyme with the aromatic amino acid phenylalanine did not alter specificity for either substrate. However, the mutants containing non-polar aliphatic amino acids (alanine, valine and leucine) at position 142 were specific only for aromatic substrates such as benzonitrile, m-tolunitrile and 2-cyanopyridine, and not for aliphatic substrates. These results suggest that the hydrolysis of substrates probably involves the conjugated pi-electron system of the aromatic ring of substrate or Tyr-142 as an electron acceptor. Moreover, the mutants containing charged amino acids such as aspartate, glutamate, arginine and asparagine at position 142 displayed no activity towards any nitrile, possibly owing to the disruption of hydrophobic interactions with substrates. Thus aromaticity of substrate or amino acid at position 142 in R. rhodochrous nitrilase is required for enzyme activity.     

Characterization of a thermostable D-stereospecific alanine amidase from Brevibacillus borstelensis BCS-1

A gene encoding a new thermostable D-stereospecific alanine amidase from the thermophile Brevibacillus borstelensis BCS-1 was cloned and sequenced. The molecular mass of the purified enzyme was estimated to be 199 kDa after gel filtration chromatography and about 30 kDa on sodium dodecyl sulfate-polyacrylamide gel electrophoresis, indicating that the enzyme could be composed of a hexamer with identical subunits. The purified enzyme exhibited strong amidase activity towards D-amino acid-containing aromatic, aliphatic, and branched amino acid amides yet exhibited no enzyme activity towards L-amino acid amides, D-amino acid-containing peptides, and NH(2)-terminally protected amino acid amides. The optimum temperature and pH for the enzyme activity were 85 degrees C and 9.0, respectively. The enzyme remained stable within a broad pH range from 7.0 to 10.0. The enzyme was inhibited by dithiothreitol, 2-mercaptoethanol, and EDTA yet was strongly activated by Co(2+) and Mn(2+). The k(cat)/K(m) for D-alaninamide was measured as 544.4 +/- 5.5 mM(-1) min(-1) at 50 degrees C with 1 mM Co(2+).     

Nitrile hydrolysing activities of deep-sea and terrestrial mycolate actinomycetes

Nitrile metabolising actinomycetes previously recovered from deep-sea sediments and terrestrial soils were investigated for their nitrile transforming properties. Metabolic profiling and activity assays confirmed that all strains catalysed the hydrolysis of nitriles by a nitrile hydratase/amidase system. Acetonitrile and benzonitrile, when used as growth substrates for enzyme induction experiments, had a significant influence on the biotransformation activities towards various nitriles and amides. The specific activities of selected deep-sea and terrestrial acetonitrile-grown bacteria against a suite of nitriles and amides were higher than those of the only other reported marine nitrile-hydrolysing R. erythropolis, isolated from a shallow sediment. The increase of nitrile chain length appeared to have negative influence on the nitrile hydratase activity of acetonitrile-grown bacteria, but the same was not true for benzonitrile-grown bacteria. The nitrile hydratases and amidases were constitutive in 10 of the 16 deep-sea and terrestrial actinomycetes studied, and one strain showed an inducible hydratase and a constitutive amidase. Most of the deep-sea strains had constitutive activities and showed some of the highest activities and broadest substrate specificities of organisms included in this study. This revised version was published online in August 2006 with corrections to the Cover Date.     

Purification and Characterization of an Enantioselective Amidase from Pseudomonas chlororaphis B23

An amidase produced by Pseudomonas chlororaphis B23 was purified and characterized. The purification procedure used included ammonium sulfate precipitation and hydrophobic, anion-exchange, gel filtration, and ceramic hydroxyapatite chromatography steps. This amidase has a native molecular mass of about 105 kDa and is a homodimer whose subunits have a molecular mass of 54 kDa. The enzyme exhibited maximal activity at 50(deg)C and at pH values ranging from 7.0 to 8.6. We found no evidence that metal ions were required, and the enzyme was inhibited by several thiol reagents. This amidase exhibited activity against a broad range of aliphatic and aromatic amides and exhibited enantioselectivity for several aromatic amides, including 2-phenylpropionamide (enantiomeric excess [ee] = 100%), phenylalaninamide (ee = 55%), and 2-(4-chlorophenyl)-3-methylbutyramide (ee = 96%), but not 2-(6-methoxy-2-naphthyl)propionamide (the amide form of naproxen) (ee = 0%). The characteristics of the P. chlororaphis B23 amidase are the same as the characteristics of enantioselective amidases described by Mayaux et al. (J. F. Mayaux, E. Cerbelaud, F. Soubrier, D. Faucher, and D. Petre, J. Bacteriol. 172:6764-6773, 1990; J. F. Mayaux, E. Cerbelaud, F. Soubrier, P. Yeh, F. Blanche, and D. Petre, J. Bacteriol. 173:6694-6704, 1991) and Kobayashi et al. (M. Kobayashi, H. Komeda, T. Nagasawa, M. Nishiyama, S. Horinouchi, T. Beppu, H. Yamada, and S. Shimizu, Eur. J. Biochem. 217:327-336, 1993).     

Purification and characterization of an amidase from an acrylamide-degrading Rhodococcus sp.

A constitutively expressed aliphatic amidase from a Rhodococcus sp. catalyzing acrylamide deamination was purified to electrophoretic homogeneity. The molecular weight of the native enzyme was estimated to be 360,000. Upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the purified preparation yielded a homogeneous protein band having an apparent molecular weight of about 44,500. The amidase had pH and temperature optima of 8.5 and 40 degrees C, respectively, and its isoelectric point was pH 4.0. The amidase had apparent K(m) values of 1.2, 2.6, 3.0, 2.7, and 5.0 mM for acrylamide, acetamide, butyramide, propionamide, and isobutyramide, respectively. Inductively coupled plasma-atomic emission spectometry analysis indicated that the enzyme contains 8 mol of iron per mol of the native enzyme. No labile sulfide was detected. The amidase activity was enhanced by, but not dependent on Fe(2+), Ba(2+), and Cr(2+). However, the enzyme activity was partially inhibited by Mg(2+) and totally inhibited in the presence of Ni(2+), Hg(2+), Cu(2+), Co(2+), specific iron chelators, and thiol blocking reagents. The NH2-terminal sequence of the first 18 amino acids displayed 88% homology to the aliphatic amidase of Brevibacterium sp. strain R312.     

A novel R-stereoselective amidase from Pseudomonas sp. MCI3434 acting on piperazine-2-tert-butylcarboxamide.

A novel amidase acting on (R,S)-piperazine-2-tert-butylcarboxamide was purified from Pseudomonas sp. MCI3434 and characterized. The enzyme acted R-stereoselectively on (R,S)-piperazine-2-tert-butylcarboxamide to yield (R)-piperazine-2-carboxylic acid, and was tentatively named R-amidase. The N-terminal amino acid sequence of the enzyme showed high sequence identity with that deduced from a gene named PA3598 encoding a hypothetical hydrolase in Pseudomonas aeruginosa PAO1. The gene encoding R-amidase was cloned from the genomic DNA of Pseudomonas sp. MCI3434 and sequenced. Analysis of 1332 bp of the genomic DNA revealed the presence of one open reading frame (ramA) which encodes the R-amidase. This enzyme, RamA, is composed of 274 amino acid residues (molecular mass, 30 128 Da), and the deduced amino acid sequence exhibits homology to a carbon-nitrogen hydrolase protein (PP3846) from Pseudomonas putida strain KT2440 (72.6% identity) and PA3598 protein from P. aeruginosa strain PAO1 (65.6% identity) and may be classified into a new subfamily in the carbon-nitrogen hydrolase family consisting of aliphatic amidase, beta-ureidopropionase, carbamylase, nitrilase, and so on. The amount of R-amidase in the supernatant of the sonicated cell-free extract of an Escherichia coli transformant overexpressing the ramA gene was about 30 000 times higher than that of Pseudomonas sp. MCI3434. The intact cells of the E. coli transformant could be used for the R-stereoselective hydrolysis of racemic piperazine-2-tert-butylcarboxamide. The recombinant enzyme was purified to electrophoretic homogeneity from cell-free extract of the E. coli transformant overexpressing the ramA gene. On gel-filtration chromatography, the enzyme appeared to be a monomer. It had maximal activity at 45 degrees C and pH 8.0, and was completely inactivated in the presence of p-chloromercuribenzoate, N-ethylmaleimide, Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Ag+, Cd2+, Hg2+, or Pb2+. RamA had hydrolyzing activity toward the carboxamide compounds, in which amino or imino group is connected to beta- or gamma-carbon, such as beta-alaninamide, (R)-piperazine-2-carboxamide (R)-piperidine-3-carboxamide, D-glutaminamide and (R)-piperazine-2-tert-butylcarboxamide. The enzyme, however, did not act on the other amide substrates for the aliphatic amidase despite its sequence similarity to RamA.