The FliP and FliR proteins of Salmonella typhimurium, putative components of the type III flagellar export apparatus, are located in the flagellar basal body

Most of the structural components of the flagellum of Salmonella typhimurium are exported through a flagellum-specific pathway, which is a member of the family of type III secretory pathways. The export apparatus for this process is poorly understood. A previous study has shown that two proteins, about 23 and 26 kDa in size and of unknown genetic origin, are incorporated into the flagellar basal body at a very early stage of flagellar assembly. In the present study, we demonstrate that these basal body proteins are FliP (in its mature form after signal peptide cleavage) and FliR respectively. Both of these proteins have homologues in other type III secretion systems. By placing a FLAG epitope tag on FliR and the MS-ring protein FliF and immunoblotting isolated hook basal body complexes with anti-FLAG monoclonal antibody, we estimate (using the FLAG-tagged FliF as an internal reference) that the stoichiometry of FliR is fewer than three copies per basal body. An independent estimate of stoichiometry was made using data from an earlier quantitative radiolabelling analysis, yielding values of around four or five subunits per basal body for FliP and around one subunit per basal body for FliR. Immunoelectron microscopy using anti-FLAG antibody and gold–protein A suggests that FliR is located near the MS ring. We propose that the flagellar export apparatus contains FliP and FliR and that this apparatus is embedded in a patch of membrane in the central pore of the MS ring.     

Assembly and stoichiometry of FliF and FlhA in Salmonella flagellar basal body

The bacterial flagellar export apparatus is required for the construction of the bacterial flagella beyond the cytoplasmic membrane. The membrane‐embedded part of the export apparatus, which consists of FlhA, FlhB, FliO, FliP, FliQ and FliR, is located in the central pore of the MS ring formed by 26 copies of FliF. The C‐terminal cytoplasmic domain of FlhA is located in the centre of the cavity within the C ring made of FliG, FliM and FliN. FlhA interacts with FliF, but its assembly mechanism remains unclear. Here, we fused yellow fluorescent protein (YFP) and cyan fluorescent protein (CFP) to the C‐termini of FliF and FlhA and investigated their subcellular localization by fluorescence microscopy. The punctate pattern of FliF–YFP localization required FliG but neither FliM, FliN, FlhA, FlhB, FliO, FliP, FliQ nor FliR. In contrast, FlhA–CFP localization required FliF, FliG, FliO, FliP, FliQ and FliR. The number of FlhA–YFP molecules associated with the MS ring was estimated to be about nine. We suggest that FlhA assembles into the export gate along with other membrane components during the MS ring complex formation in a co‐ordinated manner.     

The GTPase ARF1p controls the sequence-specific vacuolar sorting route to the lytic vacuole

We have studied the transport of soluble cargo molecules by inhibiting specific transport steps to and from the Golgi apparatus. Inhibition of export from the Golgi via coexpression of a dominant-negative GTP-restricted ARF1 mutant (Q71L) inhibits the secretion of alpha-amylase and simultaneously induces the secretion of the vacuolar protein phytepsin to the culture medium. By contrast, specific inhibition of endoplasmic reticulum export via overexpression of Sec12p or coexpression of a GTP-restricted form of Sar1p inhibits the anterograde transport of either cargo molecule in a similar manner. Increased secretion of the vacuolar protein was not observed after incubation with the drug brefeldin A or after coexpression of the GDP-restricted mutant of ARF1 (T31N). Therefore, the differential effect of inducing the secretion of one cargo molecule while inhibiting the secretion of another is dependent on the GTP hydrolysis by ARF1p and is not caused by a general inhibition of Golgi-derived COPI vesicle traffic. Moreover, we demonstrate that GTP-restricted ARF1-stimulated secretion is observed only for cargo molecules that are expected to be sorted in a BP80-dependent manner, exhibiting sequence-specific, context-independent, vacuolar sorting signals. Induced secretion of proteins carrying C-terminal vacuolar sorting signals was not observed. This finding suggests that ARF1p influences the BP80-mediated transport route to the vacuole in addition to transport steps of the default secretory pathway to the cell surface.     

Analysis of the cytoplasmic domains of Salmonella FlhA and interactions with components of the flagellar export machinery

Most flagellar proteins are exported via a type III export apparatus which, in part, consists of the membrane proteins FlhA, FlhB, FliO, FliP, FliQ, and FliR and is housed within the membrane-supramembrane ring formed by FliF subunits. Salmonella FlhA is a 692-residue integral membrane protein with eight predicted transmembrane spans. Its function is not understood, but it is necessary for flagellar export. We have created mutants in which potentially important sequences were deleted. FlhA lacking the amino-terminal sequence prior to the first transmembrane span failed to complement and was dominant negative, suggesting that the sequence is required for function. Similar effects were seen in a variant lacking a highly conserved domain (FHIPEP) within a putative cytoplasmic loop. Scanning deletion analysis of the cytoplasmic domain (FlhAc) demonstrated that substantially all of FlhAc is required for efficient function. Affinity blotting showed that FlhA interacts with several other export apparatus membrane proteins. The implications of these findings are discussed, and a model of FlhA within the export apparatus is presented.     

Mechanism of type‐III protein secretion: Regulation of FlhA conformation by a functionally critical charged‐residue cluster

The bacterial flagellum contains a specialized secretion apparatus in its base that pumps certain protein subunits through the growing structure to their sites of installation beyond the membrane. A related apparatus functions in the injectisomes of gram‐negative pathogens to export virulence factors into host cells. This mode of protein export is termed type‐III secretion (T3S). Details of the T3S mechanism are unclear. It is energized by the proton gradient; here, a mutational approach was used to identify proton‐binding groups that might function in transport. Conserved proton‐binding residues in all the membrane components were tested. The results identify residues R147, R154 and D158 of FlhA as most critical. These lie in a small, well‐conserved cytoplasmic domain of FlhA, located between transmembrane segments 4 and 5. Two‐hybrid experiments demonstrate self‐interaction of the domain, and targeted cross‐linking indicates that it forms a multimeric array. A mutation that mimics protonation of the key acidic residue (D158N) was shown to trigger a global conformational change that affects the other, larger cytoplasmic domain that interacts with the export cargo. The results are discussed in the framework of a transport model based on proton‐actuated movements in the cytoplasmic domains of FlhA.     

Functional Activation of the Flagellar Type III Secretion Export Apparatus

Flagella are assembled sequentially from the inside-out with morphogenetic checkpoints that enforce the temporal order of subunit addition. Here we show that flagellar basal bodies fail to proceed to hook assembly at high frequency in the absence of the monotopic protein SwrB of Bacillus subtilis. Genetic suppressor analysis indicates that SwrB activates the flagellar type III secretion export apparatus by the membrane protein FliP. Furthermore, mutants defective in the flagellar C-ring phenocopy the absence of SwrB for reduced hook frequency and C-ring defects may be bypassed either by SwrB overexpression or by a gain-of-function allele in the polymerization domain of FliG. We conclude that SwrB enhances the probability that the flagellar basal body adopts a conformation proficient for secretion to ensure that rod and hook subunits are not secreted in the absence of a suitable platform on which to polymerize.     

Protein export through the bacterial flagellar type III export pathway

For construction of the bacterial flagellum, which is responsible for bacterial motility, the flagellar type III export apparatus utilizes both ATP and proton motive force across the cytoplasmic membrane and exports flagellar proteins from the cytoplasm to the distal end of the nascent structure. The export apparatus consists of a membrane-embedded export gate made of FlhA, FlhB, FliO, FliP, FliQ, and FliR and a water-soluble ATPase ring complex consisting of FliH, FliI, and FliJ. FlgN, FliS, and FliT act as substrate-specific chaperones that do not only protect their cognate substrates from degradation and aggregation in the cytoplasm but also efficiently transfer the substrates to the export apparatus. The ATPase ring complex facilitates the initial entry of the substrates into the narrow pore of the export gate. The export gate by itself is a proton-protein antiporter that uses the two components of proton motive force, the electric potential difference and the proton concentration difference, for different steps of the export process. A specific interaction of FlhA with FliJ located in the center of the ATPase ring complex allows the export gate to efficiently use proton motive force to drive protein export. The ATPase ring complex couples ATP binding and hydrolysis to its assembly–disassembly cycle for rapid and efficient protein export cycle. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.     

Function of the conserved FHIPEP domain of the flagellar type III export apparatus,protein FlhA

The Type III flagellar protein export apparatus of bacteria consists of five or six membrane proteins, notably FlhA, which controls the export of other proteins and is homologous to the large family of FHIPEP export proteins. FHIPEP proteins contain a highly‐conserved cytoplasmic domain. We mutagenized the cloned Salmonella flhA gene for the 692 amino acid FlhA, changing a single, conserved amino acid in the 68‐amino acid FHIPEP region. Fifty‐two mutations at 30 positions mostly led to loss of motility and total disappearance of microscopically visible flagella, also Western blot protein/protein hybridization showed no detectable export of hook protein and flagellin. There were two exceptions: a D199A mutant strain, which produced short‐stubby flagella; and a V151L mutant strain, which did not produce flagella and excreted mainly un‐polymerized hook protein. The V151L mutant strain also exported a reduced amount of hook‐cap protein FlgD, but when grown with exogenous FlgD it produced polyhooks and polyhook‐filaments. A suppressor mutant in the cytoplasmic domain of the export apparatus membrane protein FlhB rescued export of hook‐length control protein FliK and facilitated growth of full‐length flagella. These results suggested that the FHIPEP region is part of the gate regulating substrate entry into the export apparatus pore.     

FliO Regulation of FliP in the Formation of the Salmonella enterica Flagellum

The type III secretion system of the Salmonella flagellum consists of 6 integral membrane proteins: FlhA, FlhB, FliO, FliP, FliQ, and FliR. However, in some other type III secretion systems, a homologue of FliO is apparently absent, suggesting it has a specialized role. Deleting the fliO gene from the chromosome of a motile strain of Salmonella resulted in a drastic decrease of motility. Incubation of the ΔfliO mutant strain in motility agar, gave rise to pseudorevertants containing extragenic bypass mutations in FliP at positions R143H or F190L. Using membrane topology prediction programs, and alkaline phosphatase or GFPuv chimeric protein fusions into the FliO protein, we demonstrated that FliO is bitopic with its N-terminus in the periplasm and C-terminus in the cytoplasm. Truncation analysis of FliO demonstrated that overexpression of FliO_43–125 or FliO_1–95 was able to rescue motility of the ΔfliO mutant. Further, residue leucine 91 in the cytoplasmic domain was identified to be important for function. Based on secondary structure prediction, the cytoplasmic domain, FliO_43–125, should contain beta-structure and alpha-helices. FliO_43–125-Ala was purified and studied using circular dichroism spectroscopy; however, this domain was disordered, and its structure was a mixture of beta-sheet and random coil. Coexpression of full-length FliO with FliP increased expression levels of FliP, but coexpression with the cytoplasmic domain of FliO did not enhance FliP expression levels. Overexpression of the cytoplasmic domain of FliO further rescued motility of strains deleted for the fliO gene expressing bypass mutations in FliP. These results suggest FliO maintains FliP stability through transmembrane domain interaction. The results also demonstrate that the cytoplasmic domain of FliO has functionality, and it presumably becomes structured while interacting with its binding partners.     

FlaC, a protein of Campylobacter jejuni TGH9011 (ATCC43431) secreted through the flagellar apparatus, binds epithelial cells and influences cell invasion

Type III secretion systems identified in bacterial pathogens of animals and plants transpose effectors and toxins directly into the cytosol of host cells or into the extracellular milieu. Proteins of the type III secretion apparatus are conserved among diverse and distantly related bacteria. Many type III apparatus proteins have homologues in the flagellar export apparatus, supporting the notion that type III secretion systems evolved from the flagellar export apparatus. No type III secretion apparatus genes have been found in the complete genomic sequence of Campylobacter jejuni NCTC11168. In this study, we report the characterization of a protein designated FlaC of C. jejuni TGH9011. FlaC is homologous to the N- and C-terminus of the C. jejuni flagellin proteins, FlaA and FlaB, but lacks the central portion of these proteins. flaC null mutants form a morphologically normal flagellum and are highly motile. In wild-type C. jejuni cultures, FlaC is found predominantly in the extracellular milieu as a secreted protein. Null mutants of the flagellar basal rod gene (flgF) and hook gene (flgE) do not secrete FlaC, suggesting that a functional flagellar export apparatus is required for FlaC secretion. During C. jejuni infection in vitro, secreted FlaC and purified recombinant FlaC bind to HEp-2 cells. Invasion of HEp-2 cells by flaC null mutants was reduced to a level of 14% compared with wild type, suggesting that FlaC plays an important role in cell invasion.     

Components of the Salmonella flagellar export apparatus and classification of export substrates

Until now, identification of components of the flagellar protein export apparatus has been indirect. We have now identified these components directly by establishing whether mutants defective in putative export components could translocate export substrates across the cytoplasmic membrane into the periplasmic space. Hook-type proteins could be exported to the periplasm of rod mutants, indicating that rod protein export does not have to precede hook-type protein export and therefore that both types of proteins belong to a single export class, the rod/hook-type class, which is distinct from the filament-type class. Hook-capping protein (FlgD) and hook protein (FlgE) required FlhA, FlhB, FliH, FliI, FliO, FliP, FliQ, and FliR for their export to the periplasm. In the case of flagellin as an export substrate, because of the phenomenon of hook-to-filament switching of export specificity, it was necessary to use temperature-sensitive mutants and establish whether flagellin could be exported to the cell exterior following a shift from the permissive to the restrictive temperature. Again, FlhA, FlhB, FliH, FliI, and FliO were required for its export. No suitable temperature-sensitive fliQ or fliR mutants were available. FliP appeared not to be required for flagellin export, but we suspect that the temperature-sensitive FliP protein continued to function at the restrictive temperature if incorporated at the permissive temperature. Thus, we conclude that these eight proteins are general components of the flagellar export pathway. FliJ was necessary for export of hook-type proteins (FlgD and FlgE); we were unable to test whether FliJ is needed for export of filament-type proteins. We suspect that FliJ may be a cytoplasmic chaperone for the hook-type proteins and possibly also for FliE and the rod proteins. FlgJ was not required for the export of the hook-type proteins; again, because of lack of a suitable temperature-sensitive mutant, we were unable to test whether it was required for export of filament-type proteins. Finally, it was established that there is an interaction between the processes of outer ring assembly and of penetration of the outer membrane by the rod and nascent hook, the latter process being of course necessary for passage of export substrates into the external medium. During the brief transition stage from completion of rod assembly and initiation of hook assembly, the L ring and perhaps the capping protein FlgD can be regarded as bona fide export components, with the L ring being in a formal sense the equivalent of the outer membrane secretin structure of type III virulence factor export systems.     

The FliO, FliP, FliQ, and FliR proteins of Salmonella typhimurium: putative components for flagellar assembly.

The flagellar genes fliO, fliP, fliQ, and fliR of Salmonella typhimurium are contiguous within the fliLMNOPQR operon. They are needed for flagellation but do not encode any known structural or regulatory components. They may be involved in flagellar protein export, which proceeds by a type III export pathway. The genes have been cloned and sequenced. The sequences predict proteins with molecular masses of 13,068, 26,755, 9,592, and 28,933 Da, respectively. All four gene products were identified experimentally; consistent with their high hydrophobic residue content, they segregated with the membrane fraction. From N-terminal amino acid sequence analysis, we conclude that fliO starts immediately after fliN rather than at a previously proposed site downstream. FliP existed in two forms, a 25-kDa form and a 23-kDa form. N-terminal amino acid analysis of the 23-kDa form demonstrated that it had undergone cleavage of a signal peptide--a rare process for prokaryotic cytoplasmic membrane proteins. Site-directed mutation at the cleavage site resulted in impaired processing, which reduced, but did not eliminate, complementation of a fliP mutant in swarm plate assays. A cloned fragment encoding the mature form of the protein could also complement the fliP mutant but did so even more poorly. Finally, when the first transmembrane span of MotA (a cytoplasmic membrane protein that does not undergo signal peptide cleavage) was fused to the mature form of FliP, the fusion protein complemented very weakly. Higher levels of synthesis of the mutant proteins greatly improved function. We conclude that, for insertion of FliP into the membrane, cleavage is important kinetically but not absolutely required.     

Control of effector export by the Pseudomonas aeruginosa type III secretion proteins PcrG and PcrV

Pseudomonas aeruginosa uses a type III secretion system to inject protein effectors into a targeted host cell. Effector secretion is triggered by host cell contact. How effector secretion is prevented prior to cell contact is not well understood. In all secretion systems studied to date, the needle tip protein is required for controlling effector secretion, but the mechanism by which needle tip proteins control effector secretion is unclear. Here we present data that the P. aeruginosa needle tip protein, PcrV, controls effector secretion by assembling into a functional needle tip complex. PcrV likely does not simply obstruct the secretion channel because the pore‐forming translocator proteins can still be secreted while effector secretion is repressed. This finding suggests that PcrV controls effector secretion by affecting the conformation of the apparatus, shifting it from the default, effector secretion ‘on’ conformation, to the effector secretion ‘off’ conformation. We also present evidence that PcrG, which can bind to PcrV and is also involved in controlling effector export, is cytoplasmic and that the interaction between PcrG and PcrV is not required for effector secretion control by either protein. Taken together, these data allow us to propose a working model for control of effector secretion by PcrG and PcrV.     

Structural stability of flagellin subunit affects the rate of flagellin export in the absence of FliS chaperone

FliS chaperone binds to flagellin FliC in the cytoplasm and transfers FliC to a sorting platform of the flagellar type III export apparatus through the interaction between FliS and FlhA for rapid and efficient protein export during flagellar filament assembly. FliS also suppresses the secretion of an anti‐σ factor, FlgM. Loss of FliS results in a short filament phenotype although the expression levels of FliC are increased considerably due to an increase in the secretion level of FlgM. Here to clarify the rate limiting step of FliC export in the absence of FliS, we isolated bypass mutants from a Salmonella ΔfliS mutant. All the bypass mutations were identified in FliC. These bypass mutations increased the export rate of FliC by ca. twofold, allowing the bypass mutant cells to produce longer filaments than the parental ΔfliS cells. Both far‐UV CD measurements and limited proteolysis revealed that the bypass mutations significantly destabilize the folded structure of FliC monomer. These results suggest that an unfolding step of FliC limits the export rate of FliC in the ΔfliS mutant, thereby producing short filaments. We propose that FliS promotes FliC docking at the FlhA platform to facilitate subsequent unfolding of FliC.     

Crystal structure of the C‐terminal domain of the Salmonella type III secretion system export apparatus protein InvA

InvA is a prominent inner‐membrane component of the Salmonella type III secretion system (T3SS) apparatus, which is responsible for regulating virulence protein export in pathogenic bacteria. InvA is made up of an N‐terminal integral membrane domain and a C‐terminal cytoplasmic domain that is proposed to form part of a docking platform for the soluble export apparatus proteins notably the T3SS ATPase InvC. Here, we report the novel crystal structure of the C‐terminal domain of Salmonella InvA which shows a compact structure composed of four subdomains. The overall structure is unique although the first and second subdomains exhibit structural similarity to the peripheral stalk of the A/V‐type ATPase and a ring building motif found in other T3SS proteins respectively.     

Comparative analysis of the secretion capability of early and late flagellar type III secretion substrates

A remarkable feature of the flagellar‐specific type III secretion system (T3SS) is the selective recognition of a few substrate proteins among the many thousand cytoplasmic proteins. Secretion substrates are divided into two specificity classes: early substrates secreted for hook‐basal body (HBB) construction and late substrates secreted after HBB completion. Secretion was reported to require a disordered N‐terminal secretion signal, mRNA secretion signals within the 5′‐untranslated region (5′‐UTR) and for late substrates, piloting proteins known as the T3S chaperones. Here, we utilized translational β‐lactamase fusions to probe the secretion efficacy of the N‐terminal secretion signal of fourteen secreted flagellar substrates in Salmonella enterica. We observed a surprising variety in secretion capability between flagellar proteins of the same secretory class. The peptide secretion signals of the early‐type substrates FlgD, FlgF, FlgE and the late‐type substrate FlgL were analysed in detail. Analysing the role of the 5′‐UTR in secretion of flgB and flgE revealed that the native 5′‐UTR substantially enhanced protein translation and secretion. Based on our data, we propose a multicomponent signal that drives secretion via the flagellar T3SS. Both mRNA and peptide signals are recognized by the export apparatus and together with substrate‐specific chaperones allowing for targeted secretion of flagellar substrates.     

Transport through the Golgi apparatus by rapid partitioning within a two-phase membrane system

The prevailing view of intra-Golgi transport is cisternal progression, which has a key prediction--that newly arrived cargo exhibits a lag or transit time before exiting the Golgi. Instead, we find that cargo molecules exit at an exponential rate proportional to their total Golgi abundance with no lag. Incoming cargo molecules rapidly mix with those already in the system and exit from partitioned domains with no cargo privileged for export based on its time of entry into the system. Given these results, we constructed a new model of intra-Golgi transport that involves rapid partitioning of enzymes and transmembrane cargo between two lipid phases combined with relatively rapid exchange among cisternae. Simulation and experimental testing of this rapid partitioning model reproduced all the key characteristics of the Golgi apparatus, including polarized lipid and protein gradients, exponential cargo export kinetics, and cargo waves.     

A Repulsive Electrostatic Mechanism for Protein Export through the Type III Secretion Apparatus

Many Gram-negative bacteria initiate infections by injecting effector proteins into host cells through the type III secretion apparatus, which is comprised of a basal body, a needle, and a tip. The needle channel is formed by the assembly of a single needle protein. To explore the export mechanisms of MxiH needle protein through the needle of Shigella flexneri, an essential step during needle assembly, we have performed steered molecular dynamics simulations in implicit solvent. The trajectories reveal a screwlike rotation motion during the export of nativelike helix-turn-helix conformations. Interestingly, the channel interior with excessive electronegative potential creates an energy barrier for MxiH to enter the channel, whereas the same may facilitate the ejection of the effectors into host cells. Structurally known basal regions and ATPase underneath the basal region also have electronegative interiors. Effector proteins also have considerable electronegative potential patches on their surfaces. From these observations, we propose a repulsive electrostatic mechanism for protein translocation through the type III secretion apparatus. Based on this mechanism, the ATPase activity and/or proton motive force could be used to energize the protein translocation through these nanomachines. A similar mechanism may be applicable to macromolecular channels in other secretion systems or viruses through which proteins or nucleic acids are transported.     

Functional complexity of the twin-arginine translocase TatC component revealed by site-directed mutagenesis

The Escherichia coli Tat apparatus is a membrane-bound protein translocase that serves to export folded proteins synthesized with N-terminal twin-arginine signal peptides. The essential TatC component of the Tat translocase is an integral membrane protein probably containing six transmembrane helices. Sequence analysis identified conserved TatC amino acid residues, and the role of these side-chains was assessed by single alanine substitution. This approach identified three classes of TatC mutants. Class I mutants included F94A, E103A and D211A, which were completely devoid of Tat-dependent protein export activity and thus represented residues essential for TatC function. Cross-complementation experiments with class I mutants showed that co-expression of D211A with either F94A or E103A regenerated an active Tat apparatus. These data suggest that different class I mutants may be blocked at different steps in protein transport and point to the co-existence of at least two TatC molecules within each Tat translocon. Class II mutations identified residues important, but not essential, for Tat activity, the most severely affected being L99A and Y126A. Class III mutants showed no significant defects in protein export. All but three of the essential and important residues are predicted to cluster around the cytoplasmic N-tail and first cytoplasmic loop regions of the TatC protein.     

PscI is a type III secretion needle anchoring protein with in vitro polymerization capacities

The export of bacterial toxins across the bacterial envelope requires the assembly of complex, membrane‐embedded protein architectures. Pseudomonas aeruginosa employs type III secretion (T3S) injectisome to translocate exotoxins directly into the cytoplasm of a target eukaryotic cell. This multi‐protein channel crosses two bacterial membranes and extends further as a needle through which the proteins travel. We show in this work that PscI, proposed to form the T3S system (T3SS) inner rod, possesses intrinsic properties to polymerize into flexible and regularly twisted fibrils and activates IL‐1β production in mouse bone marrow macrophages in vitro. We also found that point mutations within C‐terminal amphipathic helix of PscI alter needle assembly in vitro and T3SS function in cell infection assays, suggesting that this region is essential for an efficient needle assembly. The overexpression of PscF partially compensates for the absence of the inner rod in PscI‐deficient mutant by forming a secretion‐proficient injectisome. All together, we propose that the polymerized PscI in P. aeruginosa optimizes the injectisome function by anchoring the needle within the envelope‐embedded complex of the T3S secretome and – contrary to its counterpart in Salmonella – is not involved in substrate switching.