Fidelity of Dpo4: effect of metal ions, nucleotide selection and pyrophosphorolysis

We report the crystal structures of a translesion DNA polymerase, Dpo4, complexed with a matched or mismatched incoming nucleotide and with a pyrophosphate product after misincorporation. These structures suggest two mechanisms by which Dpo4 may reject a wrong incoming nucleotide with its preformed and open active site. First, a mismatched replicating base pair leads to poor base stacking and alignment of the metal ions and as a consequence, inhibits incorporation. By replacing Mg2+ with Mn2+, which has a relaxed coordination requirement and tolerates misalignment, the catalytic efficiency of misincorporation increases dramatically. Mn2+ also enhances translesion synthesis by Dpo4. Subtle conformational changes that lead to the proper metal ion coordination may, therefore, be a key step in catalysis. Second, the slow release of pyrophosphate may increase the fidelity of Dpo4 by stalling mispaired primer extension and promoting pyrophosphorolysis that reverses the polymerization reaction. Indeed, Dpo4 has robust pyrophosphorolysis activity and degrades the primer strand in the presence of pyrophosphate. The correct incoming nucleotide allows DNA synthesis to overcome pyrophosphorolysis, but an incorrect incoming nucleotide does not.     

Increased catalytic activity and altered fidelity of human DNA polymerase iota in the presence of manganese

All DNA polymerases require a divalent cation for catalytic activity. It is generally assumed that Mg(2+) is the physiological cofactor for replicative DNA polymerases in vivo. However, recent studies suggest that certain repair polymerases, such as pol lambda, may preferentially utilize Mn(2+) in vitro. Here we report on the effects of Mn(2+) and Mg(2+) on the enzymatic properties of human DNA polymerase iota (pol iota). pol iota exhibited the greatest activity in the presence of low levels of Mn(2+) (0.05-0.25 mm). Peak activity in the presence of Mg(2+) was observed in the range of 0.1-0.5 mm and was significantly reduced at concentrations >2 mm. Steady-state kinetic analyses revealed that Mn(2+) increases the catalytic activity of pol iota by approximately 30-60,000-fold through a dramatic decrease in the K(m) value for nucleotide incorporation. Interestingly, whereas pol iota preferentially misinserts G opposite T by a factor of approximately 1.4-2.5-fold over the correct base A in the presence of 0.25 and 5 mm Mg(2+), respectively, the correct insertion of A is actually favored 2-fold over the misincorporation of G in the presence of 0.075 mm Mn(2+). Low levels of Mn(2+) also dramatically increased the ability of pol iota to traverse a variety of DNA lesions in vitro. Titration experiments revealed a strong preference of pol iota for Mn(2+) even when Mg(2+) is present in a >10-fold excess. Our observations therefore raise the intriguing possibility that the cation utilized by pol iota in vivo may actually be Mn(2+) rather than Mg(2+), as tacitly assumed.     

Biochemical characterization of an ATP-dependent DNA ligase from the hyperthermophilic crenarchaeon <Emphasis Type="Italic">Sulfolobus shibatae</Emphasis>

A gene encoding a putative ATP-dependent DNA ligase was identified in the genome of the hyperthermophilic archaeon Sulfolobus shibatae and expressed in Escherichia coli. The 601 amino acid recombinant polypeptide was a monomeric protein capable of strand joining on a singly nicked DNA substrate in the presence of ATP ( K(m)=34 micro mu) and a divalent cation (Mn(2+), Mg(2+), or Ca(2+)). dATP was partially active in supporting ligation catalyzed by the protein, but GTP, CTP, UTP, dGTP, dCTP, dTTP, and NAD(+) were inactive. The cloned Ssh ligase showed an unusual metal cofactor requirement; it was significantly more active in the presence of Mn(2+) than in the presence of Mg(2+) or Ca(2+). Unexpectedly, the native Ssh ligase preferred Mg(2+) and Ca(2+) rather than Mn(2+). Both native and recombinant enzymes displayed optimal nick-joining activity at 60-80 degrees C. Ssh ligase discriminated against substrates containing mismatches on the 3'-side of nick junction and was more tolerant of mismatches at the 5'-end than of those at the penultimate 5'-end. The enzyme showed little activity on a 1-nucleotide gapped substrate. This is the first biochemical study of a DNA ligase from the crenarchaeotal branch of the archaea domain.     

Crystal structure of a Y-family DNA polymerase in action: a mechanism for error-prone and lesion-bypass replication

Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4) is a DinB homolog that belongs to the recently described Y-family of DNA polymerases, which are best characterized by their low-fidelity synthesis on undamaged DNA templates and propensity to traverse normally replication-blocking lesions. Crystal structures of Dpo4 in ternary complexes with DNA and an incoming nucleotide, either correct or incorrect, have been solved at 1.7 A and 2.1 A resolution, respectively. Despite a conserved active site and a hand-like configuration similar to all known polymerases, Dpo4 makes limited and nonspecific contacts with the replicating base pair, thus relaxing base selection. Dpo4 is also captured in the crystal translocating two template bases to the active site at once, suggesting a possible mechanism for bypassing thymine dimers.     

Effects of transketolase cofactors on its conformation and stability

In studying transketolase (TK) from Saccharomyces cerevisiae, the majority of researchers use as cofactors Mg(2+) and thiamine diphosphate (ThDP) (by analogy with other ThDP-dependent enzymes), whereas the active site of native holoTK is known to contain only Ca(2+). Experiments in which Mg(2+) was substituted for Ca(2+) demonstrated that the kinetic properties of TK varied with the bivalent cation cofactor. This led to the assumption that TK species obtained by reconstitution from apoTK and ThDP in the presence of Ca(2+) or Mg(2+), respectively, adopt different conformations. Kinetic study of the H103A mutant yeast transketolase. FEBS Letters 567, 270-274]. Analysis of far-UV circular dichroism (CD) spectra and of data, obtained using methods of thermal denaturing, differential scanning calorimetry (DSC) and tryptophan fluorescence spectroscopy, corroborated this assumption. Indeed, the ratios of secondary structure elements in the molecule of apoTK, recorded in the presence of Ca(2+) or Mg(2+), respectively, turned out to be different. The two forms of the holoenzyme, obtained by reconstitution from apoTK and ThDP in the presence of Ca(2+) or Mg(2+), respectively, also differed in stability: the holoenzyme was more stable in the presence of Ca(2+) than Mg(2+).     

Structural insight into recruitment of translesion DNA polymerase Dpo4 to sliding clamp PCNA

DNA polymerases are co-ordinated by sliding clamps (PCNA/β-clamp) in translesion synthesis. It is unclear how these enzymes assemble on PCNA with geometric and functional compatibility. We report the crystal structure of a full-length Y-family polymerase, Dpo4, in complex with heterodimeric PCNA1–PCNA2 at 2.05 Å resolution. Dpo4 exhibits an extended conformation that differs from the Dpo4 structures in apo- or DNA-bound form. Two hinges have been identified in Dpo4, which render the multidomain polymerase flexible conformations and orientations relative to PCNA. Dpo4 binds specifically to PCNA1 on the conserved ligand binding site. The C-terminal peptide of Dpo4 becomes structured with a 3₁₀ helix and dominates the specific binding. The Y-family polymerase also contacts PCNA1 with its finger, thumb and little finger domains, which are conformation-dependent protein–protein interactions that diversify the binding mode of Dpo4 on PCNA. The structure reveals a molecular model in which substrate/partner binding-coupled multiple conformations of a Y-family polymerase facilitate its recruitment and co-ordination on the sliding clamp. The conformational flexibility would turn the error-prone Y-family polymerase off when more efficient high-fidelity DNA polymerases work on undamaged DNA and turn it onto DNA templates to perform translesion synthesis when replication forks are stalled by DNA lesions.     

Structural snapshots of Escherichia coli histidinol phosphate phosphatase along the reaction pathway

HisB from Escherichia coli is a bifunctional enzyme catalyzing the sixth and eighth steps of l-histidine biosynthesis. The N-terminal domain (HisB-N) possesses histidinol phosphate phosphatase activity, and its crystal structure shows a single domain with fold similarity to the haloacid dehalogenase (HAD) enzyme family. HisB-N forms dimers in the crystal and in solution. The structure shows the presence of a structural Zn(2+) ion stabilizing the conformation of an extended loop. Two metal binding sites were also identified in the active site. Their presence was further confirmed by isothermal titration calorimetry. HisB-N is active in the presence of Mg(2+), Mn(2+), Co(2+), or Zn(2+), but Ca(2+) has an inhibitory effect. We have determined structures of several intermediate states corresponding to snapshots along the reaction pathway, including that of the phosphoaspartate intermediate. A catalytic mechanism, different from that described for other HAD enzymes, is proposed requiring the presence of the second metal ion not found in the active sites of previously characterized HAD enzymes, to complete the second half-reaction. The proposed mechanism is reminiscent of two-Mg(2+) ion catalysis utilized by DNA and RNA polymerases and many nucleases. The structure also provides an explanation for the inhibitory effect of Ca(2+).     

Pyrovanadolysis, a pyrophosphorolysis-like reaction mediated by pyrovanadate, Mn2+, and DNA polymerase of bacteriophage T7

DNA polymerases catalyze the 3'-5'-pyrophosphorolysis of a DNA primer annealed to a DNA template in the presence of pyrophosphate (PP(i)). In this reversal of the polymerization reaction, deoxynucleotides in DNA are converted to deoxynucleoside 5'-triphosphates. Based on the charge, size, and geometry of the oxygen connecting the two phosphorus atoms of PP(i), a variety of compounds was examined for their ability to carry out a reaction similar to pyrophosphorolysis. We describe a manganese-mediated pyrophosphorolysis-like activity using pyrovanadate (VV) catalyzed by the DNA polymerase of bacteriophage T7. We designate this reaction pyrovanadolysis. X-ray absorption spectroscopy reveals a shorter Mn-V distance of the polymerase-VV complex than the Mn-P distance of the polymerase-PP(i) complex. This structural arrangement at the active site accounts for the enzymatic activation by Mn-VV. We propose that the Mn(2+), larger than Mg(2+), fits the polymerase active site to mediate binding of VV into the active site of the polymerase. Our results may be the first documentation that vanadium can substitute for phosphorus in biological processes.     

Activation of DNA-hydrolyzing antibodies from the sera of autoimmune-prone MRL-lpr/lpr mice by different metal ions

We have shown previously that electrophoretically and immunologically homogeneous polyclonal IgGs from the sera of autoimmune-prone MRL mice possess DNase activity. Here we have analyzed for the first time activation of DNase antibodies (Abs) by different metal ions. Polyclonal DNase IgGs were not active in the presence of EDTA or after Abs dialysis against EDTA, but could be activated by several externally added metal (Me(2+)) ions, with the level of activity decreasing in the order Mn(2+)> or =Mg(2+)>Ca(2+)> or =Cu(2+)>Co(2+)> or =Ni(2+)> or =Zn(2+), whereas Fe(2+) did not stimulate hydrolysis of supercoiled plasmid DNA (scDNA) by the Abs. The dependencies of the initial rate on the concentration of different Me(2+) ions were generally bell-shaped, demonstrating one to four maxima at different concentrations of Me(2+) ions in the 0.1-12 mM range, depending on the particular metal ion. In the presence of all Me(2+) ions, IgGs pre-dialyzed against EDTA produced only the relaxed form of scDNA and then sequence-independent hydrolysis of relaxed DNA followed. Addition of Cu(2+), Zn(2+), or Ca(2+) inhibited the Mg(2+)-dependent hydrolysis of scDNA, while Ni(2+), Co(2+), and Mn(2+) activated this reaction. The Mn(2+)-dependent hydrolysis of scDNA was activated by Ca(2+), Ni(2+), Co(2+), and Mg(2+) ions but was inhibited by Cu(2+) and Zn(2+). After addition of the second metal ion, only in the case of Mg(2+) and Ca(2+) or Mn(2+) ions an accumulation of linear DNA (single strand breaks closely spaced in the opposite strands of DNA) was observed. Affinity chromatography on DNA-cellulose separated DNase IgGs into many subfractions with various affinities to DNA and very different levels of the relative activity (0-100%) in the presence of Mn(2+), Ca(2+), and Mg(2+) ions. In contrast to all human DNases having a single pH optimum, mouse DNase IgGs demonstrated several pronounced pH optima between 4.5 and 9.5 and these dependencies were different in the presence of Mn(2+), Ca(2+), and Mg(2+) ions. These findings demonstrate a diversity of the ability of IgG to function at different pH and to be activated by different optimal metal cofactors. Possible reasons for the diversity of polyclonal mouse abzymes are discussed.     

Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4): an archaeal DinB-like DNA polymerase with lesion-bypass properties akin to eukaryotic polη

Phylogenetic analysis of Y-family DNA polymerases suggests that it can be subdivided into several discrete branches consisting of UmuC/DinB/Rev1/Rad30/Rad30A and Rad30B. The most diverse is the DinB family that is found in all three kingdoms of life. Searches of the complete genome of the crenarchaeon Sulfolobus solfataricus P2 reveal that it possesses a DinB homolog that has been termed DNA polymerase IV (Dpo4). We have overproduced and purified native Dpo4 protein and report here its enzymatic characterization. Dpo4 is thermostable, but can also synthesize DNA at 37°C. Under these conditions, the enzyme exhibits misinsertion fidelities in the range of 8 × 10^–3 to 3 × 10^–4. Dpo4 is distributive but at high enzyme to template ratios can synthesize long stretches of DNA and can substitute for Taq polymerase in PCR. On damaged DNA templates, Dpo4 can facilitate translesion replication of an abasic site, a cis-syn thymine–thymine dimer, as well as acetyl aminofluorene adducted- and cisplatinated-guanine residues. Thus, although phylogenetically related to DinB polymerases, our studies suggest that the archaeal Dpo4 enzyme exhibits lesion-bypass properties that are, in fact, more akin to those of eukaryotic polη.     

Kinetics and fidelity of polymerization by DNA polymerase III from Sulfolobus solfataricus

We have biochemically and kinetically characterized the polymerase and exonuclease activities of the third B-family polymerase (Dpo3) from the hyperthermophilic Crenarchaeon, Sulfolobus solfataricus (Sso). We have established through mutagenesis that despite incomplete sequence conservation, the polymerase and exonuclease active sites are functionally conserved in Dpo3. Using pre-steady-state kinetics, we can measure the fidelity of nucleotide incorporation by Dpo3 from the polymerase active site alone to be 10(3)-10(4) at 37 °C. The functional exonuclease proofreading active site will increase fidelity by at least 10(2), making Dpo3 comparable to other DNA polymerases in this family. Additionally, Dpo3's exonuclease activity is modulated by temperature, where a loss of promiscuous degradation activity can be attributed to a reorganization of the exonuclease domain when it is bound to primer-template DNA at high temperatures. Unexpectedly, the DNA binding affinity is weak compared with those of other DNA polymerases of this family. A comparison of the fidelity, polymerization kinetics, and associated functional exonuclease domain with those previously reported for other Sso polymerases (Dpo1 and Dpo4) illustrates that Dpo3 is a potential player in the proper maintenance of the archaeal genome.     

Measuring cation dependent DNA polymerase fidelity landscapes by deep sequencing

High-throughput recording of signals embedded within inaccessible micro-environments is a technological challenge. The ideal recording device would be a nanoscale machine capable of quantitatively transducing a wide range of variables into a molecular recording medium suitable for long-term storage and facile readout in the form of digital data. We have recently proposed such a device, in which cation concentrations modulate the misincorporation rate of a DNA polymerase (DNAP) on a known template, allowing DNA sequences to encode information about the local cation concentration. In this work we quantify the cation sensitivity of DNAP misincorporation rates, making possible the indirect readout of cation concentration by DNA sequencing. Using multiplexed deep sequencing, we quantify the misincorporation properties of two DNA polymerases - Dpo4 and Klenow exo(-) - obtaining the probability and base selectivity of misincorporation at all positions within the template. We find that Dpo4 acts as a DNA recording device for Mn(2+) with a misincorporation rate gain of ～2%/mM. This modulation of misincorporation rate is selective to the template base: the probability of misincorporation on template T by Dpo4 increases >50-fold over the range tested, while the other template bases are affected less strongly. Furthermore, cation concentrations act as scaling factors for misincorporation: on a given template base, Mn(2+) and Mg(2+) change the overall misincorporation rate but do not alter the relative frequencies of incoming misincorporated nucleotides. Characterization of the ion dependence of DNAP misincorporation serves as the first step towards repurposing it as a molecular recording device.     

DNA polymerase beta: pre-steady-state kinetic analyses of dATP alpha S stereoselectivity and alteration of the stereoselectivity by various metal ions and by site-directed mutagenesis

The first pre-steady-state kinetic analysis of the stereoselectivity of a DNA polymerase, Pol beta from rat brain, toward Rp and Sp isomers of dATPalphaS, and alteration of the stereoselectivity by various metal ions and by site-directed mutagenesis are reported. Diastereomers of dATPalphaS were synthesized by enzymatic methods to >98% purity. The rate of polymerization (k(pol)) and the apparent dissociation constant (K(d,app)) were measured with dATP, Rp-dATPalphaS, and Sp-dATPalphaS in the presence of Mg(2+), Mn(2+), or Cd(2+). The results indicate that wild type (WT) polymerase (Pol) beta can incorporate both Sp- and Rp-dATPalphaS in the presence of Mg(2+), but Sp is the preferred isomer. The stereoselectivity, defined as (k(pol)/K(d))(Sp)/(k(pol)/K(d))(Rp) (abbreviated Sp/Rp ratio), is 57.5 in the presence of Mg(2+). When Mg(2+) was substituted with Mn(2+) and Cd(2+), the Sp/Rp ratio decreased to 7.6 and 21, respectively. These results are discussed in relation to the crystal structures of various Pol beta complexes, as well as previous steady-state kinetic studies of other DNA polymerases. In addition, the D276R mutant was designed to introduce a potential extra hydrogen bonding interaction between the arginine side chain and the pro-Sp oxygen of the alpha-phosphate of dNTP. The kinetic data of the D276R mutant showed a pronounced relaxation of stereoselectivity of dATPalphaS (Sp/Rp ratio = 1.5, 3.7, and 1.5 for Mg(2+), Mn(2+), and Cd(2+), respectively). Furthermore, the D276R mutant showed a 5-fold enhanced reactivity toward Rp-dATPalphaS relative to WT Pol beta, suggesting that this mutant Pol beta can be used to incorporate Rp-dNTPalphaS into DNA oligomers.     

Roles of the four DNA polymerases of the crenarchaeon Sulfolobus solfataricus and accessory proteins in DNA replication

The hyperthermophilic crenarchaeon Sulfolobus solfataricus P2 encodes three B-family DNA polymerase genes, B1 (Dpo1), B2 (Dpo2), and B3 (Dpo3), and one Y-family DNA polymerase gene, Dpo4, which are related to eukaryotic counterparts. Both mRNAs and proteins of all four DNA polymerases were constitutively expressed in all growth phases. Dpo2 and Dpo3 possessed very low DNA polymerase and 3' to 5' exonuclease activities in vitro. Steady-state kinetic efficiencies (k(cat)/K(m)) for correct nucleotide insertion by Dpo2 and Dpo3 were several orders of magnitude less than Dpo1 and Dpo4. Both the accessory proteins proliferating cell nuclear antigen and the clamp loader replication factor C facilitated DNA synthesis with Dpo3, as with Dpo1 and Dpo4, but very weakly with Dpo2. DNA synthesis by Dpo2 and Dpo3 was remarkably decreased by single-stranded binding protein, in contrast to Dpo1 and Dpo4. DNA synthesis in the presence of proliferating cell nuclear antigen, replication factor C, and single-stranded binding protein was most processive with Dpo1, whereas DNA lesion bypass was most effective with Dpo4. Both Dpo2 and Dpo3, but not Dpo1, bypassed hypoxanthine and 8-oxoguanine. Dpo2 and Dpo3 bypassed uracil and cis-syn cyclobutane thymine dimer, respectively. High concentrations of Dpo2 or Dpo3 did not attenuate DNA synthesis by Dpo1 or Dpo4. We conclude that Dpo2 and Dpo3 are much less functional and more thermolabile than Dpo1 and Dpo4 in vitro but have bypass activities across hypoxanthine, 8-oxoguanine, and either uracil or cis-syn cyclobutane thymine dimer, suggesting their catalytically limited roles in translesion DNA synthesis past deaminated, oxidized base lesions and/or UV-induced damage.     

Ca2+ improves organization of single-stranded DNA bases in human Rad51 filament, explaining stimulatory effect on gene recombination

Human RAD51 protein (HsRad51) catalyses the DNA strand exchange reaction for homologous recombination. To clarify the molecular mechanism of the reaction in vitro being more effective in the presence of Ca(2+) than of Mg(2+), we have investigated the effect of these ions on the structure of HsRad51 filament complexes with single- and double-stranded DNA, the reaction intermediates. Flow linear dichroism spectroscopy shows that the two ionic conditions induce significantly different structures in the HsRad51/single-stranded DNA complex, while the HsRad51/double-stranded DNA complex does not demonstrate this ionic dependence. In the HsRad51/single-stranded DNA filament, the primary intermediate of the strand exchange reaction, ATP/Ca(2+) induces an ordered conformation of DNA, with preferentially perpendicular orientation of nucleobases relative to the filament axis, while the presence of ATP/Mg(2+), ADP/Mg(2+) or ADP/Ca(2+) does not. A high strand exchange activity is observed for the filament formed with ATP/Ca(2+), whereas the other filaments exhibit lower activity. Molecular modelling suggests that the structural variation is caused by the divalent cation interfering with the L2 loop close to the DNA-binding site. It is proposed that the larger Ca(2+) stabilizes the loop conformation and thereby the protein-DNA interaction. A tight binding of DNA, with bases perpendicularly oriented, could facilitate strand exchange.     

Low fidelity DNA synthesis by a y family DNA polymerase due to misalignment in the active site

Sulfolobus solfataricus DNA polymerase IV (Dpo4) is a member of the Y family of DNA polymerases whose crystal structure has recently been solved. As a model for other evolutionarily conserved Y family members that perform translesion DNA synthesis and have low fidelity, we describe here the base substitution and frameshift fidelity of DNA synthesis by Dpo4. Dpo4 generates all 12 base-base mismatches at high rates, 11 of which are similar to those of its human homolog, DNA polymerase kappa. This result is consistent with the Dpo4 structure, implying lower geometric selection for correct base pairs. Surprisingly, Dpo4 generates C.dCMP mismatches at an unusually high average rate and preferentially at cytosine flanked by 5'-template guanine. Dpo4 also has very low frameshift fidelity and frequently generates deletions of even noniterated nucleotides, especially cytosine flanked by a 5'-template guanine. Both unusual features of error specificity suggest that Dpo4 can incorporate dNTP precursors when two template nucleotides are present in the active site binding pocket. These results have implications for mutagenesis resulting from DNA synthesis by Y family polymerases.     

Structure and activity of Y-class DNA polymerase DPO4 from Sulfolobus solfataricus with templates containing the hydrophobic thymine analog 2,4-difluorotoluene

The 2,4-difluorotoluene (DFT) analog of thymine has been used extensively to probe the relative importance of shape and hydrogen bonding for correct nucleotide insertion by DNA polymerases. As far as high fidelity (A-class) polymerases are concerned, shape is considered by some as key to incorporation of A(T) opposite T(A) and G(C) opposite C(G). We have carried out a detailed kinetic analysis of in vitro primer extension opposite DFT-containing templates by the trans-lesion (Y-class) DNA polymerase Dpo4 from Sulfolobus solfataricus. Although full-length product formation was observed, steady-state kinetic data show that dATP insertion opposite DFT is greatly inhibited relative to insertion opposite T (approximately 5,000-fold). No products were observed in the pre-steady-state. Furthermore, it is noteworthy that Dpo4 strongly prefers dATP opposite DFT over dGTP (approximately 200-fold) and that the polymerase is able to extend an A:DFT but not a G:DFT pair. We present crystal structures of Dpo4 in complex with DNA duplexes containing the DFT analog, the first for any DNA polymerase. In the structures, template-DFT is either positioned opposite primer-A or -G at the -1 site or is unopposed by a primer base and followed by a dGTP:A mismatch pair at the active site, representative of a -1 frameshift. The three structures provide insight into the discrimination by Dpo4 between dATP and dGTP opposite DFT and its inability to extend beyond a G:DFT pair. Although hydrogen bonding is clearly important for error-free replication by this Y-class DNA polymerase, our work demonstrates that Dpo4 also relies on shape and electrostatics to distinguish between correct and incorrect incoming nucleotide.     

TRPM7 provides an ion channel mechanism for cellular entry of trace metal ions

Trace metal ions such as Zn(2+), Fe(2+), Cu(2+), Mn(2+), and Co(2+) are required cofactors for many essential cellular enzymes, yet little is known about the mechanisms through which they enter into cells. We have shown previously that the widely expressed ion channel TRPM7 (LTRPC7, ChaK1, TRP-PLIK) functions as a Ca(2+)- and Mg(2+)-permeable cation channel, whose activity is regulated by intracellular Mg(2+) and Mg(2+).ATP and have designated native TRPM7-mediated currents as magnesium-nucleotide-regulated metal ion currents (MagNuM). Here we report that heterologously overexpressed TRPM7 in HEK-293 cells conducts a range of essential and toxic divalent metal ions with strong preference for Zn(2+) and Ni(2+), which both permeate TRPM7 up to four times better than Ca(2+). Similarly, native MagNuM currents are also able to support Zn(2+) entry. Furthermore, TRPM7 allows other essential metals such as Mn(2+) and Co(2+) to permeate, and permits significant entry of nonphysiologic or toxic metals such as Cd(2+), Ba(2+), and Sr(2+). Equimolar replacement studies substituting 10 mM Ca(2+) with the respective divalent ions reveal a unique permeation profile for TRPM7 with a permeability sequence of Zn(2+) approximately Ni(2+) > Ba(2+) > Co(2+) > Mg(2+) >/= Mn(2+) >/= Sr(2+) >/= Cd(2+) >/= Ca(2+), while trivalent ions such as La(3+) and Gd(3+) are not measurably permeable. With the exception of Mg(2+), which exerts strong negative feedback from the intracellular side of the pore, this sequence is faithfully maintained when isotonic solutions of these divalent cations are used. Fura-2 quenching experiments with Mn(2+), Co(2+), or Ni(2+) suggest that these can be transported by TRPM7 in the presence of physiological levels of Ca(2+) and Mg(2+), suggesting that TRPM7 represents a novel ion-channel mechanism for cellular metal ion entry into vertebrate cells.     

The effects of copper and other ions on the ribonucleic acid polymerase activity of isolated rat liver nuclei

1. The effects of various ions on the Mg(2+)- and Mn(2+)/ammonium sulphate-activated RNA polymerase activities of isolated liver nuclei were studied. 2. The Mg(2+)-activated RNA polymerase reaction was inhibited by more than 60% by Cd(2+), SeO(3) (2-), Be(2+), Cu(2+), Co(2+), Ca(2+) and La(3+), all at 1mm concentrations. 3. The Mn(2+)/ammonium sulphate-activated RNA polymerase reaction was strongly inhibited by Hg(2+), Cd(2+), Cu(2+) and Ag(+). The effect of Hg(2+), Cd(2+) and Ag(+) was relieved by cysteine or mercaptoethanol. 4. Inhibition by Cu(2+) was not affected by addition of DNA, and was relieved only partially by EDTA or histidine. 5. No changes of RNA polymerase activities were observed in nuclei isolated from the liver of rats treated with copper albuminate.     

Liquid crystalline phase behavior of high molecular weight DNA: a comparative study of the influence of metal ions of different size, charge and binding mode

The ability of Li(+), Na(+), K(+), Rb(+), Cs(+), Mg(2+), Ca(2+), Sr(2+), Ba(2+), Cu(2+), Cd(2+), Al(3+), V(4+), Hg(2+), Pd(2+), Au(3+), and Pt(4+) to provoke liquid crystalline (LC) phases in high molecular weight DNA was investigated. The alkali and alkaline earth metal ions provoked typical cholesteric/columnar structures, whereas transition metal ions precipitated DNA into solid/translucent gel-like aggregates. Heavy metal ions reduced viscosity of DNA solution, disrupting rigid, rod-like DNA structure necessary for LC textures. Three-layer quantum mechanical-molecular mechanical (QM/MM) studies of Li(+), Na(+), K(+), Mg(2+), and Ca(2+) binding DNA fragment suggested several possible binding modes of these ions to the phosphate groups. The dianion mode of metal binding, involving the phosphate groups of both strands of DNA, allowed for higher DNA binding affinity of the alkaline earth metal ions. These results have implications in understanding the biological role of metal ions and developing DNA-based sensors and nanoelectronic devices.