Molecular analysis of the replication region of the theta-replicating plasmid pUCL287 from Tetragenococcus (Pediococcus) halophilus ATCC33315

The complete nucleotide sequence of the 8.7-kb theta-replicating plasmid pUCL287 from Tetragenococcus halophilus (formerly Pediococcus halophilus) ATCC33315 has been determined. The replication region was identified and analyzed. Its nucleotide sequence contains an untranslated region, the replication origin, followed by two open reading frames (ORFs) encoding two proteins of 311 (RepA287) and 168 (RepB287) amino acids, respectively. Evidence is presented to show that RepA287 represents the plasmid replication protein. RepB287, which is non-essential for replication, is involved in the plasmid copy-number control and segregational stability. The roles of lactococcal proteins homologous to RepB287 have not been defined so far. Nevertheless, the structural organization of the pUCL287 replication region is remarkably similar to those of well known theta-replicating lactococcal plasmids despite the absence of homology of the replication origin and of the replication protein, and this suggests that pUCL287 uses the same mechanism of replication. Nucleotide sequence comparisons show that pSMB74, a pediococcal plasmid encoding bacteriocin production, is a member of the pUCL287 replicon family.     

Molecular analysis of the replication region of the theta-replicating plasmid pUCL287 from Tetragenococcus ( Pediococcus ) halophilus ATCC33315

The complete nucleotide sequence of the 8.7-kb theta-replicating plasmid pUCL287 from Tetragenococcus halophilus (formerly Pediococcus halophilus) ATCC33315 has been determined. The replication region was identified and analyzed. Its nucleotide sequence contains an untranslated region, the replication origin, followed by two open reading frames (ORFs) encoding two proteins of 311 (RepA287) and 168 (RepB287) amino acids, respectively. Evidence is presented to show that RepA287 represents the plasmid replication protein. RepB287, which is non-essential for replication, is involved in the plasmid copy-number control and segregational stability. The roles of lactococcal proteins homologous to RepB287 have not been defined so far. Nevertheless, the structural organization of the pUCL287 replication region is remarkably similar to those of well known theta-replicating lactococcal plasmids despite the absence of homology of the replication origin and of the replication protein, and this suggests that pUCL287 uses the same mechanism of replication. Nucleotide sequence comparisons show that pSMB74, a pediococcal plasmid encoding bacteriocin production, is a member of the pUCL287 replicon family. Received: 22 May 1996 / Accepted: 11 April 1997     

pS86, A New Theta-Replicating Plasmid from Enterococcus faecalis

The complete nucleotide sequence of the small (5149 bp) and cryptic plasmid pS86 from Enterococcus faecalis ssp. faecalis S-86 has been determined. Sequence analysis revealed six putative open reading frames (ORFs) encoding polypeptides of 28.3, 11.5, 8.4, 65.1, 7.3, and 11.96 kDa each. Based on sequence similarity, two cassettes have been identified in pS86: ORF1 codes for the replication initiation protein (Rep); ORF4 codes for a putative mobilization protein that shows similarities to Mob/Pre proteins from plasmids of Gram-positive bacteria. No function could be assigned to the other putative ORFs found. According to our results, pS86 plasmid could use a theta-mode of replication, similar to the recently described theta-type replicons from pUCL287 (Tetragenococcus halophila) and pLA1 or pLA105 (Lactobacillus acidophilus) plasmids. Received: 24 November 1999 / Accepted: 26 April 2000     

Expression of the immunity protein of plantaricin 423, produced by Lactobacillus plantarum 423, and analysis of the plasmid encoding the bacteriocin

Plantaricin 423 is a class IIa bacteriocin produced by Lactobacillus plantarum isolated from sorghum beer. It has been previously determined that plantaricin 423 is encoded by a plasmid designated pPLA4, which is now completely sequenced. The plantaricin 423 operon shares high sequence similarity with the operons of coagulin, pediocin PA-1, and pediocin AcH, with small differences in the DNA sequence encoding the mature bacteriocin peptide and the immunity protein. Apart from the bacteriocin operon, no significant sequence similarity could be detected between the DNA or translated sequence of pPLA4 and the available DNA or translated sequences of the plasmids encoding pediocin AcH, pediocin PA-1, and coagulin, possibly indicating a different origin. In addition to the bacteriocin operon, sequence analysis of pPLA4 revealed the presence of two open reading frames (ORFs). ORF1 encodes a putative mobilization (Mob) protein that is homologous to the pMV158 superfamily of mobilization proteins. Highest sequence similarity occurred between this protein and the Mob protein of L. plantarum NCDO 1088. ORF2 encodes a putative replication protein that revealed low sequence similarity to replication proteins of plasmids pLME300 from Lactobacillus fermentum and pYIT356 from Lactobacillus casei. The immunity protein of plantaricin 423 contains 109 amino acids. Although plantaricin 423 shares high sequence similarity with the pediocin PA-1 operon, no cross-reactivity was recorded between the immunity proteins of plantaricin 423 and pediocin PA-1.     

Characterization of a phage resistance plasmid, pLKS, of silage-making Lactobacillus plantarum NGRI0101

Phage contamination has resulted in abnormal fermentation in silage. We isolated a phage-resistant strain, Lactobacillus plantarum NGRI0101 from silage. The strain carried two plasmids, pLKL (6.8 kb) and pLKS (2.0 kb). By curing and retransformation of the plasmids, we clarified that pLKS has phage resistant activity, characterized as no adsorption inhibition. pLKS has 2,025 bp and three orfs, orfl23, orf132, and orf918. The predicted amino acid sequence of the orf918 product showed high similarity to those of Rep proteins of Pediococcus halophilus plasmid pUCL287 and Lactobacillus acidophilus plasmid pLA103. The replication origin (ori) was upstream from orf918. There was no gene similar to typical phage resistant genes encoded by known plasmids. The phage resistance of L. plantarum NGRI0101 may possibly be due to a plasmid-encoded abortive infection.     

Characterization of two compatible small plasmids from Sphingobium yanoikuyae

We isolated and characterized two small cryptic indigenous plasmids, pYAN-1 (4,896 bp) and pYAN-2 (4,687 bp), from Sphingobium yanoikuyae, and developed a versatile system that permitted genetic manipulation of the genus Sphingomonas. Nucleotide sequencing of both plasmids revealed that they contained mobA, mobs, and repA genes, which are predicted to encode proteins associated with mobilization and replication, in common. Transformation with each plasmid harboring the antibiotic resistance gene by electroporation was fully successful, using Novosphingobium capsulatum as a host.     

pUCL287 plasmid from Tetragenococcus halophila (Pediococcus halophilus) ATCC 33315 represents a new theta-type replicon family of lactic acid bacteria

Abstract A cryptic plasmid, pUCL287, was isolated from Tetragenococcus halophila (Pediococcus halophilus) ATCC 33315. It had a theta-type mechanism of replication in its natural host. Its minimal replicon, Rep 281, was isolated on a 1.6-kb Eco RI fragment. The Rep 287 host range included the genera Pediococcus, Enterococcus, Lactobacillus and Leuconostoc but not genus Lactococcus . Plasmids hybridizing to pUCL287 are rare among lactic acid bacteria. As assessed by hybridization, Rep2Sl is dissimilar to pAMβ1, pIP50l and pUCL22, representatives of the most common theta-type replicon groups in Gram-positive bacteria. Therefore, pUCL287 appears to represent a new theta-type replicon family from lactic acid bacteria.     

Genetic organization and conjugal plasmid DNA transfer of pHP69, a plasmid from a Korean isolate of Helicobacter pylori

We isolated pHP69, a 9,153 bp plasmid from Helicobacter pylori with a 33.98% (G+C) content. We identified 11 open reading frames (ORFs), including replication initiation protein A (repA), fic (cAMP-induced filamentation protein), mccC, mccB, mobA, mobD, mobB, and mobC, as well as four 22 bp tandem repeat sequences. The nucleic acid and predicted amino acid sequences of these ORFs exhibited significant homology to those of other H. pylori plasmids. pHP69 repA encodes a replication initiation protein and its amino acid sequence is similar to those of replicase proteins from theta-type plasmids. pHP69 contains two types of repeat sequences (R1 and R2), a MOBHEN family mobilization region comprising mobC, mobA, mobB, and mobD, and genes encoding microcin B and C. Among the 36 H. pylori strains containing plasmids, mobA or mccBC are present in 12 or 6, respectively and 3 contain both genes. To examine intrinsic capability of H. pylori for conjugative plasmid transfer, a shuttle vector pBHP69KH containing pHP69 and replication origin of pBR322 was constructed. It was shown that this vector could stably replicate and be mobilized among clinical H. pylori strains and demonstrated to gene transfer by natural plasmid.     

The repABC plasmid family

repABC plasmids are widely distributed among alpha-proteobacteria. They are especially common in Rhizobiales. Some strains of this bacterial order can contain multiple repABC replicons indicating that this plasmid family includes several incompatibility groups. The replication and stable maintenance of these replicons depend on the presence of a repABC operon. The repABC operons sequenced to date share some general characteristics. All of them contain at least three protein-encoding genes: repA, repB and repC. The first two genes encode proteins involved in plasmid segregation, whereas repC encodes a protein crucial for replication. The origin of replication maps within the repC gene. In contrast, the centromere-like sequence (parS) can be located at various positions in the operon. In this review we will summarize current knowledge about this plasmid family, with special emphasis on their structural diversity and their complex genetic regulation. Finally, we will examine some ideas about their evolutionary origin and trends.     

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

Comparative Biology of Two Natural Variants of the IncQ-2 Family Plasmids,pRAS3.1 and pRAS3.2

Plasmids pRAS3.1 and pRAS3.2 are two closely related, natural variants of the IncQ-2 plasmid family that have identical plasmid backbones except for two differences. Plasmid pRAS3.1 has five 6-bp repeat sequences in the promoter region of the mobB gene and four 22-bp iterons in its oriV region, whereas pRAS3.2 has only four 6-bp repeats and three 22-bp iterons. Plasmid pRAS3.1 was found to have a higher copy number than pRAS3.2, and we show that the extra 6-bp repeat results in an increase in mobB and downstream mobA/repB expression. Placement of repB (primase) behind an arabinose-inducible promoter in trans resulted in an increase in repB expression and an approximately twofold increase in the copy number of plasmids with identical numbers of 22-bp iterons. The pRAS3 plasmids were shown to have a previously unrecognized toxin-antitoxin plasmid stability module within their replicons. The ability of the pRAS3 plasmids to mobilize the oriT regions of two other plasmids of the IncQ-2 family, pTF-FC2 and pTC-F14, suggested that the mobilization proteins pRAS3 are relaxed and can mobilize oriT regions with substantially different sequences. Plasmids pRAS3.1 and pRAS3.2 were highly incompatible with plasmids pTF-FC2 and pTC-F14, and this incompatibility was removed on inactivation of an open reading frame situated downstream of the mobCDE mobilization genes rather than being due to the 22-bp oriV-associated iterons. We propose that the pRAS3 plasmids represent a third, γ incompatibility group within the IncQ-2 family plasmids.Plasmids of the IncQ family are small (<20 kb), have a broad host range, and are highly promiscuous due to their ability to be mobilized very efficiently by self-transmissible plasmids such as the IncP plasmids. They have been divided into two families, IncQ-1 and IncQ-2, based on the amino acid sequence relatedness of their RepA (helicase), RepB (primase), and RepC (DNA-binding) replication proteins and because the mobilization proteins of the two families are unrelated, consisting of three or five genes, respectively (31). IncQ-1 group plasmids include RSF1010 and the near-identical R1162, pDN1, pIE1107, pIE1115, and pIE1130, while IncQ-2 plasmids include pTF-FC2, pTC-F14, and pRAS3.IncQ-2 plasmids pRAS3.1 and pRAS3.2 were isolated in Norway from the fish pathogens Aeromonas salmonicida subsp. salmonicida and atypical A. salmonicida, respectively, while investigating plasmids that conferred resistance to tetracycline (21). The two plasmids encode identical replication and mobilization proteins, with the most important differences in the plasmid backbone being that pRAS3.1 has four 22-bp iterons in its oriV region and five 6-bp repeat sequences upstream of its mobB gene, whereas pRAS3.2 has only three iterons and four 6-bp repeat sequences. No biological studies were carried out in the initial report of the pRAS3 plasmids. As a contribution to our studies on the evolution of IncQ plasmids, our longer-term aim is to address the question of why two natural versions of the plasmid exist. Here we report on the major differences in the biology of the two plasmids. In addition, we discovered the presence of repC and mobB genes that were not detected when the sequence of pRAS3 plasmids was previously reported. We also discovered a putative toxin-antitoxin (TA) postsegregational system different from that found in other members of the IncQ plasmids and tested it for functionality.The IncQ-1 plasmids are subdivided into incompatibility groups α, β, and γ, (31), whereas the IncQ-2 plasmids are subdivided into two incompatibility groups, α and β (14). In this work we also report on the incompatibility between the pRAS3 plasmids and other members of the IncQ-2 plasmid family as well as the IncQ-1 family plasmids. Furthermore, we compare the functional relatedness of the pRAS3 mobilization system with that of previously studied IncQ-2 plasmids.     

Genomic comparison of archaeal conjugative plasmids from Sulfolobus

All of the known self-transmissable plasmids of the Archaea have been found in the genus Sulfolobus. To gain more insight into archaeal conjugative processes, four newly isolated self-transmissable plasmids, pKEF9, pHVE14, pARN3 and pARN4, were sequenced and subjected to a comparative sequence analysis with two earlier sequenced plasmids, pNOB8 and pING1. The analyses revealed three conserved and functionally distinct sections in the genomes. Section A is considered to encode the main components of the conjugative apparatus, where two genes show low but significant sequence similarity to sections of genes encoding bacterial conjugative proteins. A putative origin of replication is located in section B, which is highly conserved in sequence and contains several perfect and imperfect direct and inverted repeats. Further downstream, in section C, an operon encoding six to nine smaller proteins is implicated in the initiation and regulation of replication. Each plasmid carries an integrase gene of the type that does not partition on integration, and there is strong evidence for their integration into host chromosomes, where they may facilitate intercellular exchange of chromosomal genes. Two plasmids contain hexameric short regularly spaced repeats (SRSR), which have been implicated in plasmid maintenance, and each plasmid carries multiple recombination motifs, concentrated in the variable regions, which likely provide sites for genomic rearrangements.     

Characterization of pRS5: A theta-type plasmid found in a strain of Pediococcus pentosaceus isolated from wine that can be used to generate cloning vectors for lactic acid bacteria

The nucleotide sequence of pRS5 (10153 bp) is reported. Through sequence analysis, 9 open reading frames (ORFs) were identified and the following features observed: a region likely involved in replication whose structural features indicate that pRS5 belongs to the pUCL287 group of theta-type replicons, and hypothetical proteins putatively involved in plasmid copy number control, restriction–modification system, toxin–antitoxin system and a putative integrase. Shuttle vectors for Escherichia coli and lactic acid bacteria (LAB) as well as a small cloning vector for direct use in LAB were constructed using the replication region of pRS5. The ability of such vectors to accept and express other genes was assessed. All pRS5-derivatives were maintained at a high rate over 200 generations without selective pressure.     

Analysis of the mobilization region of the broad-host-range IncQ-like plasmid pTC-F14 and its ability to interact with a related plasmid, pTF-FC2

Plasmid pTC-F14 is a 14.2-kb plasmid isolated from Acidithiobacillus caldus that has a replicon that is closely related to the promiscuous, broad-host-range IncQ family of plasmids. The region containing the mobilization genes was sequenced and encoded five Mob proteins that were related to those of the DNA processing (Dtr or Tra1) region of IncP plasmids rather than to the three-Mob-protein system of the IncQ group 1 plasmids (e.g., plasmid RSF1010 or R1162). Plasmid pTC-F14 is the second example of an IncQ family plasmid that has five mob genes, the other being pTF-FC2. The minimal region that was essential for mobilization included the mobA, mobB, and mobC genes, as well as the oriT gene. The mobD and mobE genes were nonessential, but together, they enhanced the mobilization frequency by approximately 300-fold. Mobilization of pTC-F14 between Escherichia coli strains by a chromosomally integrated RP4 plasmid was more than 3,500-fold less efficient than the mobilization of pTF-FC2. When both plasmids were coresident in the same E. coli host, pTC-F14 was mobilized at almost the same frequency as pTF-FC2. This enhanced pTC-F14 mobilization frequency was due to the presence of a combination of the pTF-FC2 mobD and mobE gene products, the functions of which are still unknown. Mob protein interaction at the oriT regions was unidirectionally plasmid specific in that a plasmid with the oriT region of pTC-F14 could be mobilized by pTF-FC2 but not vice versa. No evidence for any negative effect on the transfer of one plasmid by the related, potentially competitive plasmid was obtained.     

Cryptic plasmid pRK2 from Escherichia coli W: sequence analysis and segregational stability

Cryptic plasmid pRK2 of the strain Escherichia coli W (ATCC 9637), an ancestor of production strains for penicillin G acylase, was sequenced and characterized. Based on the data on replication region and origin (ori sequence AAC, 924-926nt), the plasmid was classified as ColE1-like plasmid. DNA sequence analysis revealed five orfs hypothetical products of which shared a significant sequence similarity with putative proteins encoded by DNA of plasmid pColE1. orf1 codes for protein Rom involved in the control of plasmid replication, orfs 2-5 code for putative mobilization proteins (Mob A-D) that show a high level of similarity with the ones encoded by DNA of plasmids pColE1 and pLG13 (E. coli), pECL18 and pEC01 (Enterobacter cloacae), pSFD10 (Salmonella choleraesuis), and pScol7 (Shigella sonnei). Recombinant plasmids pRS11 (4.91kbp), pRS12 (4.91kbp), pRS2 (2.996kbp), and pRS3 (2.623kbp) that bear the Spectinomycin resistance determinant (Spc(R)) were prepared on the basis of nucleotide sequence of pRK2. These constructs are stably maintained in the population of E. coli cells grown in the absence of the selection pressure for 63 generations. The copy number of Spc(R) constructs in E. coli host grown in antibiotic-free LB medium ranges from 25 to 40 molecules per chromosomal equivalent.     

A molecular analysis of a broad-host-range plasmid isolated from Thiobacillus ferrooxidans

Abstract: A 12.4-kb plasmid, pTF-FC2, that was isolated from Thiobacillus ferrooxidans and which is capable of replication in a wide range of Gram-negative bacteria, has been sequenced. The extent of the regions involved in both replication and mobilization have been delineated. The site of initiation of replication ( oriV ) has been localized on a 185-bp fragment and the origin of transfer ( oriT ) on a 138-bp fragment. Three proteins that were essential for replication and four that were essential for mobilization have been identified. The origin of replication was clearly similar to that of the IncQ plasmids although no complementation or incompatibility between pTF-FC2 and the IncQ plasmid, R300B, was detected. There was a clear similarity in the size,location and amino acid sequence of the proteins of the pTF-FC2 mobilization region with those of the TraI region of the IncP plasmids, RP4 and R751.Two inverted repeated sequences which had 37/38-bp and 38/38-bp sequence identity with the Tn 21 transposon were identified. The C-terminal part of a transposase and the N-terminal portion of a resolvase were located between the inverted repeats. These open reading frames are most likely the remnants of a defective transposon. A protein with homology to a mercury- resistance regulator was also present within the transposon-like element although no gene encoding for mercury reductase could be indentified.     

Genetic relationship among Bacillus licheniformis rolling-circle-replicating plasmids and complete nucleotide sequence of pBL63.1, an atypical replicon

The degree of biodiversity among Bacillus licheniformis plasmids and their relation to other Bacillus subtilis group plasmids has been evaluated. To attain this goal we surveyed the diversity and linkage of replication modules in a collection of 21 naturally occurring plasmids of B. licheniformis strains, isolated from different geographical areas. On the basis of rep gene sequence analysis it was possible to group the B. licheniformis plasmids rep genes in two main cluster. Comparison with known rep genes from Bacillus rolling-circle-replicating (RCR) plasmids revealed the presence in B. licheniformis plasmids of replication genes with a DNA sequence peculiar to B. licheniformis species together with rep genes with a very high sequence similarity to B. subtilis plasmids. Furthermore, the molecular organization of an atypical replicon, pBL63.1, was shown. This plasmid did not display any significant similarity with known Bacillus RCR plasmids. The complete nucleotide sequence evidenced a replication module with an unexpected similarity with Rep proteins from RCR plasmids of bacterial species phylogenetically distantly related to Bacillus. pBL63.1 represents an exception to the low-level diversity hypothesis among Bacillus RC replicons.