Wetting Kinetics: an Alternative Approach Towards Understanding the Enhanced Dissolution Rate for Amorphous Solid Dispersion of a Poorly Soluble Drug

Developing amorphous solid dispersions of water-insoluble molecules using polymeric materials is a well-defined approach to improve the dissolution rate and bioavailability. While the selected polymer plays a vital role in stabilizing the amorphous solid dispersion physically, it is equally important to improve the dissolution profile by inhibiting crystallization from the supersaturated solution generated by dissolution of the amorphous material. Furthermore, understanding the mechanism of dissolution rate enhancement is of vital importance. In this work, wetting kinetics was taken up as an alternative approach for understanding the enhanced dissolution rate for amorphous solid dispersion of a poorly soluble drug. While cilostazol (CIL) was selected as the model drug, povidone (PVP), copovidone, and hypromellose (HPMC) were the polymers of choice. The concentrations against time profiles were evaluated for the supersaturated solutions of CIL in the presence and absence of the selected polymers. The degree of supersaturation increased significantly with increase in polymer content within the solid dispersion. While povidone was found to maintain the highest level of supersaturation for the greatest length of time both in dissolution and solution crystallization experiments, copovidone and hypromellose were found to be the less effective as crystallization inhibitor. The ability of polymers to generate and maintain supersaturated drug solutions was assessed by dissolution studies. The wetting kinetics was compared against the solid dispersion composition to establish a correlation with enhanced dissolution rate.KEY WORDS: Cilostazol, Crystallization inhibition, Solid dispersions, Supersaturated solutions, Wetting kinetics     

Determination of the Activity of Immobilized Biocatalysts in the Case of Poorly Soluble Substrates: The Example of D-5Phenylhydantoinase

The present communication describes the determination of activity of immobilized biocatalysts, from progress curves, in the case of a poorly soluble substrate. Computer simulation is used for the comparison of five well known methods for the determination of initial velocity of the reaction with the modified method of smoothing experimental data by cubic spline. The computer simulation data show that, in the case of poorly soluble substrate, it is expedient to use the method of data linearization in the co-ordinate system p/t versus p and method of splines.     

Determination of the Activity of Immobilized Biocatalysts in the Case of Poorly Soluble Substrates: The Example of D-5Phenylhydantoinase

The present communication describes the determination of activity of immobilized biocatalysts, from progress curves, in the case of a poorly soluble substrate. Computer simulation is used for the comparison of five well known methods for the determination of initial velocity of the reaction with the modified method of smoothing experimental data by cubic spline. The computer simulation data show that, in the case of poorly soluble substrate, it is expedient to use the method of data linearization in the co-ordinate system p/t versus p and method of splines.     

Geomicrobiology of Pyrite (FeS2) Dissolution: Case Study at Iron Mountain,California

Geomicrobiology of pyrite weathering at Iron Mountain, CA, was investigated by molecular biological, surface chemical, surface structural, and solution chemical methods in both laboratory and field-based studies. Research focused at sites both within and peripheral to the ore-body. The acid-generating areas we have examined thus far at Iron Mountain (solution pH <1.0, temperature> 35 C) were populated by species other than Thiobacillus ferrooxidans . 16S rDNA bacterial sequence analysis and domain- and specieslevel oligonucleotide probe-based investigations confirmed the presence of planktonic Leptospirillum ferrooxidans and indicated the existence of other species apparently related to other newly described acidophilic chemolithotrophs. T. ferrooxidans was confined to relatively moderate environments (pH 2-3, 20-30 C) that were peripheral to the orebody. Dissolution rate measurements indicated that, per cell, attached and planktonic species contributed comparably in acid release. Surface colonization experiments in the laboratory and field indicated that attachment was specific to sulfides instead of to silicates, occurred in crystallographically preferred orientations, and, after cell division, resulted in a monolayer of cells at a maximum density of 8 X 106 cells cm2. In situ geochemical characterization throughout the year revealed that the microbial community that controlled acid generation varied and could be correlated with seasonal and spatial fluctuations in geochemical conditions.     

Improvement of Dissolution Behavior for Poorly Water-Soluble Drug by Application of Cyclodextrin in Extrusion Process: Comparison between Melt Extrusion and Wet Extrusion

The purpose of this study was to improve dissolution behavior of poorly water-soluble drugs by application of cyclodextrin in extrusion processes, which were melt extrusion process and wet extrusion process. Indomethacin (IM) was employed as a model drug. Extrudates containing IM and 2-hydroxypropyl-β-cyclodextrin (HP-β-CyD) in 1:1 w/w ratio were manufactured by both melt extrusion process and wet extrusion process. In vitro drug release properties of IM from extrudates and physiochemical properties of extrudates were investigated. The dissolution rates of IM from extrudates manufactured by melt extrusion and wet extrusion with HP-β-CyD were significantly higher than that of the physical mixture of IM and HP-β-CyD. In extrudate manufactured by melt extrusion, γ-form of IM changed to amorphous completely during melt extrusion due to heating above melting point of IM. On the other hand, in extrudate manufactured by wet extrusion, γ-form of IM changed to amorphous partially due to interaction between IM and HP-β-CyD and mechanical agitating force during process. Application of HP-β-CyD in extrusion process is useful for the enhancement of dissolution rate for poorly water-soluble drugs.     

Disintegration of Highly Soluble Immediate Release Tablets: A Surrogate for Dissolution

The purpose of the work was to investigate correlation between disintegration and dissolution for immediate release tablets containing a high solubility drug and to identify formulations where disintegration test, instead of the dissolution test, may be used as the acceptance criteria based on International Conference on Harmonization Q6A guidelines. A statistical design of experiments was used to study the effect of filler, binder, disintegrating agent, and tablet hardness on the disintegration and dissolution of verapamil hydrochloride tablets. All formulation variables, i.e., filler, binder, and disintegrating agent, were found to influence tablet dissolution and disintegration, with the filler and disintegrating agent exerting the most significant influence. Slower dissolution was observed with increasing disintegration time when either the filler or the disintegrating agent was kept constant. However, no direct corelationship was observed between the disintegration and dissolution across all formulations due to the interactions between different formulation components. Although all tablets containing sodium carboxymethyl cellulose as the disintegrating agent, disintegrated in less than 3 min, half of them failed to meet the US Pharmacopeia 30 dissolution criteria for the verapamil hydrochloride tablets highlighting the dependence of dissolution process on the formulation components other than the disintegrating agent. The results identified only one formulation as suitable for using the disintegration test, instead of the dissolution test, as drug product acceptance criteria and highlight the need for systematic studies before using the disintegration test, instead of the dissolution test as the drug acceptance criteria. The opinions expressed in this work are only of authors and do not necessarily reflect the policy and statements of the FDA.     

Development and Validation of a Discriminating <Emphasis Type="Italic">In Vitro</Emphasis> Dissolution Method for a Poorly Soluble Drug,Olmesartan Medoxomil: Comparison Between Commercial Tablets

A dissolution test for tablets containing 40 mg of olmesartan medoxomil (OLM) was developed and validated using both LC-UV and UV methods. After evaluation of the sink condition, dissolution medium, and stability of the drug, the method was validated using USP apparatus 2, 50 rpm rotation speed, and 900 ml of deaerated H₂O + 0.5% sodium lauryl sulfate (w/v) at pH 6.8 (adjusted with 18% phosphoric acid) as the dissolution medium. The model-independent method using difference factor (f ₁) and similarity factor (f ₂), model-dependent method, and dissolution efficiency were employed to compare dissolution profiles. The kinetic parameters of drug release were also investigated. The obtained results provided adequate dissolution profiles. The developed dissolution test was validated according to international guidelines. Since there is no monograph for this drug in tablets, the dissolution method presented here can be used as a quality control test for OLM in this dosage form, especially in a batch to batch evaluation.     

啮齿类螺杆菌不同检测方法的比较

目的确定用于实验啮齿类动物常规螺杆菌检测方法。方法选用针对螺杆菌属16S rRNA属特异性的4对引物进行了引物选择、取材部位以及与分离培养法比较。结果引物P7/P8的敏感性优于其它3对,检出限可达0.01 pg,对阳性动物群检出率80%-100%;分离培养法检出率40%-50%;盲肠、结肠检出率无显著差异。结论以引物P7/P8的PCR方法作为啮齿类实验动物螺杆菌初筛方法,分离培养法作为验证方法,取材部位可在盲肠或结肠。     

小鼠精原干细胞不同转染方法效率的比较

本研究采用腺病毒感染、慢病毒感染、脂质体转染和电穿孔转化方法将含有绿色荧光蛋白（GFP）的质粒转入经过差异贴壁法初步分离纯化的小鼠精原干细胞(SSCs)中,转染48 h后通过流式细胞仪检测GFP阳性细胞比例比较4种方法在体外转染精原干细胞的效率.结果显示,脂质体转染效率最高仅为8.64%,不能满足对精原干细胞进一步实验的要求;电穿孔法效率最高达到25.27%,但转化后细胞大量死亡;腺病毒转染细胞的效率达到了32.4%;慢病毒转染效率最高,达到74.25%. 因此,慢病毒转染法是体外转染小鼠精原干细胞的有效方法.     

Comparison of the Photosynthetic Yield of Cyanobacteria and Green Algae: Different Methods Give Different Answers

The societal importance of renewable carbon-based commodities and energy carriers has elicited a particular interest for high performance phototrophic microorganisms. Selection of optimal strains is often based on direct comparison under laboratory conditions of maximal growth rate or additional valued features such as lipid content. Instead of reporting growth rate in culture, estimation of photosynthetic efficiency (quantum yield of PSII) by pulse-amplitude modulated (PAM) fluorimetry is an often applied alternative method. Here we compared the quantum yield of PSII and the photonic yield on biomass for the green alga Chlorella sorokiniana 211-8K and the cyanobacterium Synechocystis sp. PCC 6803. Our data demonstrate that the PAM technique inherently underestimates the photosynthetic efficiency of cyanobacteria by rendering a high F₀ and a low F_M, specifically after the commonly practiced dark pre-incubation before a yield measurement. Yet when comparing the calculated biomass yield on light in continuous culture experiments, we obtained nearly equal values for both species. Using mutants of Synechocystis sp. PCC 6803, we analyzed the factors that compromise its PAM-based quantum yield measurements. We will discuss the role of dark respiratory activity, fluorescence emission from the phycobilisomes, and the Mehler-like reaction. Based on the above observations we recommend that PAM measurements in cyanobacteria are interpreted only qualitatively.     

Prodrug Approaches for Enhancing the Bioavailability of Drugs with Low Solubility

Low water solubility and low bioavailability are frequent problems in drug development, particularly in the area of central nervous system (CNS) drugs. This short review describes selected prodrug approaches which have been developed to enhance the bioavailability of drugs, especially that of poorly soluble drugs. Some of the most successful drugs on the market are prodrugs. With a better understanding of active‐transport processes at cell membranes in the gut as well as at the blood–brain barrier, the importance of prodrug approaches will further increase in the future. Prodrug approaches will already be considered in the early phase of drug discovery.     

Entomopathogenic Nematode Infectivity Assay: Comparison of Penetration Rate into Different Hosts

Penetration rate (the percentage of the initial infective juvenile inoculum that invades an insect host) was tested as an indicator of entomopathogenic nematode infectivity. Several host-parasite-substrate combinations were evaluated for penetration rate. Four steinernematids, Steinernema carpocapsae, S. glaseri, S. feltiae, S. riobravis and two strains of Heterorhabditis bacteriophora were tested in a contact bioassay against the wax moth, Galleria mellonella, the yellow meal worm, Tenebrio molitor, the beet armyworm, Spodoptera exigua, the black cutworm, Agrotis ipsilon, and the European corn borer, Ostrinia nubilalis. The insect larvae were confined individually in sand and filter paper arenas and exposed to 200 infective juveniles. After incubation, dead insects were dissected in order to count the nematodes penetrated. The data were analyzed for the effects of nematode strain and substrate on penetration rate. The bioassay substrate had a variable effect depending on the insect species. The nematode effect was highly significant for all insects tested. The penetration rate therefore allowed comparisons among nematode strains invading a host. Nematode ranking for infectivity differed according to the insect tested.     

The Dissociation Rate of Unlabelled Drugs from Receptor Sites: A Poorly Investigated,Yet Important Aspect in Receptor Research. Studies on the Serotonin-S2 Receptor

Abstract

The labelling by ³H-spiperone of serotonin-S₂ receptors in rat frontal cortex tissue adsorbed to glass fibre filters was investigated. For 12 unlabelled serotonin antagonists the dissociation time from serotonin-S₂ receptors was measured using rat frontal cortex tissue preparations adsorbed to glass fibre filters. The dissociation half-time varied from 4.8 min for pipamperone to 160 min for ritanserin. The drug-receptor dissociation time was not related to a particular class of chemical structure, or to the lipophilicity or the acid dissociation constant of the drugs. The essential requirement of experimental determination of the drug-receptor dissociation time for each drug individually is illustrated. The possible applications of the knowledge of the drug-receptor dissociation time in in vitro and in vivo receptor studies, in pharmacological and pharmaco-kinetic studies and in drug design and receptor modelling is discussed. For various serotonin-S₂ antagonists, the type of inhibition produced by the drug on ³H-ketanserin binding to serotonin-S₂ receptors was determined using suspensions of rat frontal cortical tissue. The observed patterns of inhibition were clearly related to the drug-receptor dissociation times: rapidly dissociating drugs produced competitive inhibition, drugs with dissociation half-times between 15-30 min produced mixed type inhibition, and the very slowly dissociating ritanserin produced non-competitive inhibition.     

Conservation of Freshwater Biodiversity: a Comparison of Different Area Selection Methods

The biodiversity of freshwater systems is endangered, especially in Mediterranean semiarid areas such as the south east of the Iberian Peninsula, whose rich and endemic biota is threatened by the development of surrounding land-crop irrigation. For this reason, the prioritization of areas for biodiversity conservation is an urgent target. In this study we used data records of water beetles from a province of the southeast of Spain for assessing priority areas for freshwater biodiversity conservation. We compare the performance of various area-selection methods, ranging from scoring procedures to complementarity-based algorithms, which are based on different criteria such as richness, rarity and vulnerability. The complementarity approaches were more efficient than methods using scoring or richness and rarity hotspots for representing conservation targets in a given number of areas and for identifying the minimum set of areas containing all species at least once. Within these, the richness-based algorithm was more efficient than rarity-based algorithm. Crucial target habitats for aquatic biodiversity conservation in the area studied are streams at medium altitude, hypersaline streams, and endorreic and karstic complexes.     

两种微量RNA扩增方法的比较研究

本研究通过比较体外转录和单引物扩增这两种扩增微量RNA的不同方法,以寻找一种高效的扩增方法。我们用两种不同方法分别扩增小鼠大脑全皮层及第五皮层细胞的RNA,扩增的RNA合成cDNA后进行荧光定量PCR实验,根据PCR结果比较两种不同扩增方法的效率。WT-ovation扩增RNA的效率约为IVT效率的2.8倍;IVT方法扩增后,基因D-C值与引物距离mRNA 3'端的长度及mRNA的长度均存在正线性相关(P<0.05),即引物距离mRNA的3'端越近、mRNA越短,基因D-Ct值越低。而WT-ovation方法扩增后,基因D-Ct值与引物距离mRNA 3'端的长度及mRNA的长度均不存在统计学相关性。与IVT方法相比,WT-ovation方法效率更高,扩增时受影响因素较少、更稳定。     

Comparison of Different Agar Diffusion Methods for the Detection of Antimicrobial Residues in Slaughter Animals

The different agar diffusion methods were compared using antibiotic and sulphonamide-impregnated filter-paper discs and the kidneys of healthy and emergency-slaughtered pigs and cows after slaughter. No method used seemed to be sensitive to all antimicrobial drugs preimpregnated onto discs. Tetracycline yielded a greater zone of inhibition at pH 6 than at pH 8 and aminoglycosides, erythromycin, polymyxin B and lin cornycin at pH 8 than at pH 6. It therefore seems necessary to use different pHs (6 and 8). The addition of trimethoprim to the medium is necessary for the detection of sulphonamides. Bacillus subtilis BGA used as the test organism was more sensitive to sulphonamides on the “Test agar for the inhibitor test” containing trimethoprim than on the “Iso-Sensitest agar” also containing trimethoprim. The addition of trimethoprim to “Test agar for the inhibitor test” is recommended at pH 8 but not at pH 6 because false-positive cases (with inhibition zones > 2 mm) were observed at pH 6 with trimethoprim on the kidneys of healthy pigs.