First Evidence of Division and Accumulation of Viable but Nonculturable Pseudomonas fluorescens Cells on Surfaces Subjected to Conditions Encountered at Meat Processing Premises

Cleaning and disinfection of open surfaces in food industry premises leave some microorganisms behind; these microorganisms build up a resident flora on the surfaces. Our goal was to explore the phenomena involved in the establishment of this biofilm. Ceramic coupons were contaminated, once only, with Pseudomonas fluorescens suspended in meat exudate incubated at 10°C. The mean adhering population after 1 day was 10² CFU·cm⁻² and 10³ total cells·cm⁻², i.e., the total number of cells stained by DAPI (4′,6′-diamidino-2-phenylindole). The coupons were subjected daily to a cleaning product, a disinfectant, and a further soiling with exudate. The result was a striking difference between the numbers of CFU, which reached 10⁴ CFU·cm⁻², and the numbers of total cells, which reached 2 × 10⁶ cells·cm⁻² in 10 days. By using hypotheses all leading to an overestimation of the number of dead cells, we showed that the quantity of nonculturable cells (DAPI-positive cells minus CFU) observed cannot be accounted for as an accumulation of dead cells. Some nonculturable cells are therefore dividing on the surface, although cell division is unable to continue to the stage of macrocolony formation on agar. The same phenomenon was observed when only a chlorinated alkaline product was used and the number of cells capable of reducing 5-cyano-2,3-ditolyl tetrazolium chloride was close to the number of total cells, confirming that most nonculturable cells are viable but nonculturable. Furthermore, the daily shock applied to the cells does not prompt them to enter a new lag phase. Since a single application of microorganisms is sufficient to produce this accumulation of cells, it appears that the phenomenon is inevitable on open surfaces in food industry premises.     

Quantification of Campylobacter spp. in chicken rinse samples by using flotation prior to real-time PCR

Real-time PCR is fast, sensitive, specific, and can deliver quantitative data; however, two disadvantages are that this technology is sensitive to inhibition by food and that it does not distinguish between DNA originating from viable, viable nonculturable (VNC), and dead cells. For this reason, real-time PCR has been combined with a novel discontinuous buoyant density gradient method, called flotation, in order to allow detection of only viable and VNC cells of thermotolerant campylobacters in chicken rinse samples. Studying the buoyant densities of different Campylobacter spp. showed that densities changed at different time points during growth; however, all varied between 1.065 and 1.109 g/ml. These data were then used to develop a flotation assay. Results showed that after flotation and real-time PCR, cell concentrations as low as 8.6 x 10(2) CFU/ml could be detected without culture enrichment and amounts as low as 2.6 x 10(3) CFU/ml could be quantified. Furthermore, subjecting viable cells and dead cells to flotation showed that viable cells were recovered after flotation treatment but that dead cells and/or their DNA was not detected. Also, when samples containing VNC cells mixed with dead cells were treated with flotation after storage at 4 or 20 degrees C for 21 days, a similar percentage resembling the VNC cell fraction was detected using real-time PCR and 5-cyano-2,3-ditolyl tetrazolium chloride-4',6'-diamidino-2-phenylindole staining (20% +/- 9% and 23% +/- 4%, respectively, at 4 degrees C; 11% +/- 4% and 10% +/- 2%, respectively, at 20 degrees C). This indicated that viable and VNC Campylobacter cells could be positively selected and quantified using the flotation method.     

In vitro laser ablation of laboratory developed biofilms using an Nd:YAG laser of 532 nm wavelength

We studied the laser ablation of laboratory-developed biofilm on titanium and glass surfaces. Specifically, Pseudoalteromonas carrageenovora, a marine biofilm forming bacterium was used to generate laboratory biofilm. Two fluences, 0.05 and 0.1 J/cm(2) and three durations of irradiation, 30 s, 5 min, and 10 min were tested using an Nd;YAG laser of 532 nm wavelength (in the green light area). Nonirradiated coupons with biofilm served as control. The biofilm removal efficiency increased with the increase in laser fluence and duration of irradiation. The maximum biofilm area cover on control coupons of glass and titanium was 62.5 and 76.0%, respectively. Upon irradiation with fluence 0.1 J/cm(2) for the very short duration of 30 s, this reduced to 5.6 and 12.4% and at 10 min to 2.17 and 0.7% on glass and titanium coupons, respectively, while the controls did not show any reductions (62.5 and 76.0% respectively, for glass and titanium coupons). The biofilm TRC (Total Resuscitated Cells) reduction during this period was even more prominent than the area cover, indicating that the remaining biofilm portions on coupons after irradiation were largely composed of dead bacterial cells. The TRC in the irradiation chamber medium for short durations of irradiation showed a significant increase, indicating that the laser irradiation removed live bacteria from the biofilm. The re-growth of the resuscitated cells showed they could grow like the control cells but with a significant lag. The laser's efficiency in the removal of biofilm was better seen on titanium coupons than on glass. Our results showed that a low-power pulsed laser irradiation could be used to remove biofilm formed on hard surfaces.     

Adhesion of water stressed Helicobacter pylori to abiotic surfaces

AIM: The main aim of this work was to study and compare the adhesion of water exposed Helicobacter pylori to six different substrata and correlate any changes in morphology, physiology, ability to form aggregates and cultivability when in the planktonic or in the sessile phase. METHODS AND RESULTS: The number of total cells adhered for different water exposure times and modifications in the cell shape were evaluated using epifluorescence and scanning electron microscopy, and physiology assessed using Syto9 and propidium iodide (PI) cellular uptake. All abiotic surfaces were rapidly colonized by H. pylori, and colonization appeared to reach a steady state after 96 h with levels ranging from 2.3 x 10(6) to 3.6 x 10(6) total cells cm(-2). Cell morphology was largely dependent on the support material, with spiral bacteria, associated with the infectious form of H. pylori, subsisting in a higher percentage on nonpolymeric substrata. Also, sessile bacteria were generally able to retain the spiral shape for longer when compared with planktonic bacteria, which became coccoid more quickly. The formation of large aggregates, which may act as a protection mechanism against the negative impact of the stressful external environmental conditions, was mostly observed on the surface of copper coupons. However, Syto9 and PI staining indicates that most of H. pylori attached to copper or SS304 have a compromised cell membrane after only 48 h. Cultivability methods were only able to detect the bacteria up to the 2 h exposure-time and at very low levels (up to 500 CFU cm(-2)). CONCLUSIONS: The fact that the pathogen is able to adhere, retain the spiral morphology for longer and form large aggregates when attached to different plumbing materials appeared to point to pipe materials in general, and copper plumbing in particular, as a possible reservoir of virulent H. pylori in water distribution systems. However, the Syto9/PI staining results and cultivability methods indicate that the attached H. pylori cells quickly enter in a nonviable physiological state. SIGNIFICANCE AND IMPACT OF THE STUDY: This represents the first study of H. pylori behaviour in water-exposed abiotic surfaces. It suggests that co-aggregation with the autochthonous heterotrophic consortia present in water is necessary for a longer survival of the pathogen in biofilms associated to drinking water systems.     

Antimicrobial activity of argon fluoride (ArF) excimer laser on gram-negative bacteria

The objective of this study was to evaluate the antibacterial activity of argon fluoride (ArF) excimer laser radiation on clinically important strains of gram-negative bacteria. The antibacterial activity of ArF excimer laser radiation was evaluated on two Acinetobacter baumannii, one Enterobacter cloacae, three Escherichia coli, two Helicobacter pylori, one Klebsiella pneumoniae and two Pseudomonas aeruginosa strains. The strains were isolated from clinical specimens and typed by the usual biochemical procedures. Square agar plates of 12 x 12 cm were divided into rectangular (2 x 3 cm) regions and spread with 0.5x 10(4) colony forming units (CFU)/ml of bacterial suspension. The excess liquid was removed and the plates were allowed to dry for 30 min. A total of 96 rectangular (2x3 cm) regions were used for each strain, in order to test an equal number of laser parameters. Each rectangular region was irradiated with different laser parameters, using a 193 nm ArF excimer laser, linked with a simple Galilean afocal system and a rectangular diaphragm of the same dimensions as the original laser beam cross-section, at a distance of 10 cm from the irradiated surface. This system was used in order to keep the laser pulse energy under 80 mJ and to cut-out the non-transverse electromagnetic mode branches of the laser beam. We then studied the bacterial survival ratio versus the number of laser pulses, the repetition frequency and the total laser beam fluence. Our results showed that the total laser beam fluence was the most important parameter to consider in evaluating the bactericidal effect of ArF excimer laser radiation. A critical value of the total fluence was determined for each strain, such that, for laser beam fluences greater than this critical value, no colonies appeared to survive while, for laser fluences less than this critical value, the survival ratio did not exceed 2 x 10(7) CFU (2 x 10(-5)%). These critical values were found to vary between 8 J/cm2 and 16 J/cm2 for the bacterial species studied. Under these conditions, ArF laser irradiation is promising for the sterilisation of hard surfaces and for in situ application.     

Application of antisera raised against sulfate-reducing bacteria for indirect immunofluorescent detection of immunoreactive bacteria in sediment from the German Baltic Sea.

Polyclonal rabbit antisera raised against sulfate-reducing bacteria (SRB) could detect several distinct populations of bacteria in sediment from the German Baltic Sea. The depth distribution of immunoreactive bacteria was determined by an indirect immunofluorescence filter method. Anti-Desulfovibrio desulfuricans DSM 1926 serum showed maximum bacterial numbers at a depth of 18 cm, with a concentration of 60 x 10(6) cells cm-3. With anti-Desulfovibrio baculatus DSM 2555 serum, counts were highest at the same depth, approaching 0.7 x 10(6) cells cm-3. Other significantly smaller populations were observed. Anti-SRBStrain 1 (lactate,vibrio) maxima were at 0 to 4 cm and at 17 to 18 cm. Anti-SRBStrain 2 (lactate,vibrio) serum showed several local maxima. Anti-SRBStrain 3 (lactate,oval) serum detected one single peak at a depth of 10 to 12 cm. Also determined were rates of sulfate reduction, total bacterial counts by acridine orange staining, and the viable counts by dilution series on anaerobic lactate medium. The total bacterial counts were highest (180 x 10(6) cells cm-3) at 3 to 4 cm and dropped to 24 x 10(6) cells cm-3 at 10 to 11 cm but showed additional local maxima reaching 140 x 10(6) cells cm-3 at a depth of 17 to 18 cm. Viable counts probable number) were above 10(5) CFU cm-3 at 0 to 3.6 cm but remained below 10(3) CFU at 7.2 to 18 cm. The sulfate reduction rate was maximal (107 nmol cm-3 day-1) at a depth of 1 to 2 cm, dropped to 10 nmol cm-3 day-1 at 12 to 13 cm, and reached 38 nmol cm-3 day-1 at 17 to 18 cm.     

Use of ethidium bromide monoazide for quantification of viable and dead mixed bacterial flora from fish fillets by polymerase chain reaction

Ethidium bromide monoazide (EMA) was utilized to selectively allow conventional PCR amplification of target DNA from viable but not dead cells from a broth culture of bacterial mixed flora derived from cod fillets. The universal primers designated DG74 and RW01 that amplify a 370-bp sequence of a highly conserved region of all eubacterial 16S rDNA were used for the PCR. The use of 10 microg/ml or less of EMA did not inhibit the PCR amplification of DNA derived from viable bacteria. The minimum amount of EMA to completely inhibit the PCR amplification of DNA derived from dead bacterial cells was 0.8 microg/ml. Amplification of target DNA from only viable cells in a suspension with dead cells was selectively accomplished by first treating the cells with 1 microg/ml of EMA. A standard curve was generated relating the intensity of fluorescence of DNA bands to the log of CFU of mixed bacterial cultures for rapidly assessing the number of genomic targets per PCR derived from the number of CFU. A linear range of DNA amplification was exhibited from 1 x 10(2) to 1 x 10(5) genomic targets per PCR. The viable/dead cell discrimination with the EMA-PCR method was evaluated by comparison with plate counts following freezing and thawing. Thawing frozen cell suspensions initially containing 1 x 10(5) CFU/ml at 4, 20, and 37 degrees C yielded a 0.8 log reduction in the number of viable cells determined by both plate counts and EMA-PCR. In contrast, thawing for 5 min at 70 degrees C resulted in a 5 log reduction in CFU derived from plate counts (no CFU detected) whereas the EMA-PCR procedure resulted in only a 2.8 log reduction in genomic targets, possibly reflecting greater damage to enzymes or ribosomes at 70 degrees C to a minority of the mixed population compared to membrane damage.     

Predominance of Nonculturable Cells of the Biocontrol Strain Pseudomonas fluorescens CHA0 in the Surface Horizon of Large Outdoor Lysimeters

The persistence of the biocontrol agent Pseudomonas fluorescens CHA0 in the surface horizon of 12 large outdoor lysimeters planted with winter wheat, Phacelia tanacetifolia followed by spring wheat, or maize was monitored for 1 year. Soil was inoculated with a spontaneous rifampin-resistant mutant (CHA0-Rif) of CHA0, and the strain was studied by using colony counts, Kogure's direct viable counts, and total counts (immunofluorescence). The number of culturable cells of the inoculant decreased progressively from 8 to 2 log CFU/g of soil or lower. However, culturable cells of CHA0-Rif accounted for less than 1% of the total cells of the inoculant 8 months after release in autumn. Since viable but nonculturable cells represented less than a quarter of the latter, most cells of CHA0-Rif in soil were thus inactive-dormant or dead at that time. Nonculturable cells of the inoculant were predominant also in the surface horizon of the lysimeters inoculated in the spring, and a significant fraction of them were viable. Results suggest that the occurrence of nonculturable cells of CHA0-Rif was influenced by climatic factors (water availability and soil temperature) and the abundance of roots in soil. The fact that the inoculant persisted as mixed populations of cells of different physiological states, in which nonculturable cells were predominant, needs to be taken into account when assessing the autecology of wild-type or genetically modified pseudomonads released into the soil ecosystem.     

Biofilm formation by the yeast Rhodotorula mucilaginosa: process, repeatability and cell attachment in a continuous biofilm reactor

Yeast biofilms contribute to quality impairment of industrial processes and also play an important role in clinical infections. Little is known about biofilm formation and their treatment. The aim of this study was to establish a multi-layer yeast biofilm model using a modified 3.7 l bench-top bioreactor operated in continuous mode (D = 0.12 h(-1)). The repeatability of biofilm formation was tested by comparing five bioprocesses with Rhodotorula mucilaginosa, a strain isolated from washing machines. The amount of biofilm formed after 6 days post inoculation was 83 μg cm(-2) protein, 197 μg cm(-2) polysaccharide and 6.9 × 10(6) CFU cm(-2) on smooth polypropylene surfaces. Roughening the surface doubled the amount of biofilm but also increased its spatial variability. Plasma modification of polypropylene significantly reduced the hydrophobicity but did not enhance cell attachment. The biofilm formed on polypropylene coupons could be used for sanitation studies.     

Fate of Enterobacter cloacae JP120 and Alcaligenes eutrophus AEO106(pRO101) in soil during water stress: effects on culturability and viability.

A sandy loam soil near field capacity moisture content (psi = -0.050 MPa) or air dried (psi = -300 MPa) was inoculated with about 3 x 10(7) CFU of Enterobacter cloacae JP120 and Alcaligenes eutrophus AEO106(pRO101) per g and incubated in 40-g portions at 17 degrees C in closed or open Erlenmeyer flasks. In the field-moist soil, selective plating, direct viable counts, and DNA hybridization showed only minor changes in the numbers of E. cloacae and A. eutrophus cells with time (14 days), and the results obtained with the three detection methods generally agreed. In the air-dried soil, the majority of both bacteria were found as intact DNA-carrying cells that were neither culturable nor viable by the methods employed in this study. The numbers of culturable E. cloacae and A. eutrophus cells dropped to 10(5) and 10(2) CFU/g, respectively, 2 h after inoculation. Direct viable counts showed that only about 1% of the cells detected by immunofluorescence microscopy were viable, but a fraction of viable nonculturable cells of both bacteria was present. A. eutrophus did not tolerate desiccation as well as E. cloacae. Only a minor fraction of the two test organisms regained their culturability or viability after rewetting of the air-dried soil; the number of total heterotrophic culturable bacteria, however, increased more than 10-fold and reached 73% of the level found in the field-moist soil at day 14.     

Application of flow cytometry to segregated kinetic modeling based on the physiological states of microorganisms

Flow cytometry (FC) has been introduced to characterize and to assess the physiological states of microorganisms in conjunction with the classical plate-counting method. To show the applicability of the technique, in particular for the development of kinetic models, pure culture fermentation experiments were followed over time, using both prokaryotic (Lactobacillus hilgardii) and eukaryotic (Saccharomyces cerevisiae) microorganisms growing in standard culture media (MRS and YPD). The differences observed between the active and viable cells determined by FC and CFU, respectively, allowed us to determine that a large number of cells were in a viable but nonculturable (VBNC) state, which resulted in a subpopulation much larger than the damaged-cell (double-stained) subpopulation. Finally, the determination of the evolution of viable, the VBNC, and the dead cells allowed us to develop a segregated kinetic model to describe the yeast and the bacteria population dynamics and glucose consumption in batch cultures. This model, more complete than that which is traditionally used, based only on viable cell measurements, describes better the behavior and the functionality of the cultures, giving a deeper knowledge in real time about the status and the course of the bioprocesses.     

Recovery of culturability of an HOCl-stressed population of Escherichia coli after incubation in phosphate buffer: resuscitation or regrowth?

An Escherichia coli population harvested in exponential phase at about 10(8) cells/ml was treated in phosphate buffer with HOCl at concentrations ranging from 0.4 to 1 mg/liter (7.7 to 19 microM). The HOCl stress resulted in the appearance of three cell subpopulations: a majority of dead (nonrespiring) cells, a few culturable cells (10(2) to 10(4)), and about 10(7) viable but nonculturable cells. In the absence of any added exogenous nutrient, a culturable population could be recovered after 1 day of incubation in phosphate buffer, and such a population would reach a cell density close to 10% of the initial density of the stressed population, whatever the initial number of survivors. When a small number of untreated cells were mixed with the stressed population, growth of the untreated cells was observed, demonstrating that damaged cells provided nutrients. Similarly, a filtrate and a disrupted-cell filtrate of the stressed population supported growth of untreated cells with the same efficiency. The number of CFU (untreated or stressed) at plateau phase depended on the initial density of the stressed cells. Taken together, these results suggest that recovery in phosphate buffer of an HOCl-stressed population is in large part due to growth of a few culturable cells at the expense of damaged cells. However, comparison of the growth rates of the stressed culturable population and of untreated bacteria growing in filtrate showed significantly faster growth of the stressed cells, a fact not fully compatible with the hypothesis that recovery is only the simple growth of survivors. We suggest, therefore, that in addition to growth of the few culturable stressed cells, there is repair and growth of some mildly injured viable but nonculturable cells.     

The effect of metal microstructure on the initial attachment of Escherichia coli to 1010 carbon steel

Metallurgical features have been shown to play an important role in the attachment of microorganisms to metal surfaces. In the present study, the influence of the microstructure of as-received (AR) and heat-treated (HT) 1010 carbon steel on the initial attachment of bacteria was investigated. Heat treatment was carried out with the aim of increasing the grain size of the carbon steel coupons. Mirror-polished carbon steel coupons were immersed in a minimal medium inoculated with Escherichia coli (ATCC 25922) to investigate the early (15, 30 and 60?min) and relatively longer-term (4?h) stages of bacterial attachment. The results showed preferential colonisation of bacteria on the grain boundaries of the steel coupons. The bacterial attachment to AR steel coupons was relatively uniform compared to the HT steel coupons where an increased number of localised aggregates of bacteria were found. Quantitative analysis showed that the ratio of the total number of isolated (ie single) bacteria to the number of bacteria in aggregates was significantly higher on the AR coupons than the HT coupons. Longer-term immersion studies showed production of extracellular polymeric substances by the bacteria and corrosion at the grain boundaries on both types of steel coupon tested.     

Rectal carriage of enterohemorrhagic Escherichia coli O157 in slaughtered cattle

Escherichia coli O157:H7 is an important cause of diarrhea, hemorrhagic colitis, and potentially fatal human illness. Cattle are considered a primary reservoir of infection, and recent experimental evidence has indicated that the terminal rectum is the principal site of bacterial carriage. To test this finding in naturally colonized animals, intact rectum samples from 267 cattle in 24 separate lots were obtained immediately after slaughter, and fecal material and mucosal surfaces were cultured for E. coli O157 by direct and enrichment methods. Two locations, 1 and 15 cm proximal to the recto-anal junction, were tested. In total, 35 animals were positive for E. coli O157 at at least one of the sites and 232 animals were negative as determined by all tests. The frequency of isolation and the numbers of E. coli O157 cells were higher at the site closer to the recto-anal junction, confirming our previous experimental findings. We defined low- and high-level carriers as animals with E. coli O157 levels of <1 x 10(3) CFU g(-1) or <1 x 10(3) CFU ml(-1) and animals with E. coli O157 levels of > or =1 x 10(3) CFU g(-1) or > or =1 x 10(3) CFU ml(-1) in feces or tissues, respectively. High-level carriage was detected in 3.7% of the animals (95% confidence interval, 1.8 to 6.8%), and carriage on the mucosal surface of the terminal rectum was associated with high-level fecal excretion. In summary, our results support previous work demonstrating that the mucosal epithelium in the bovine terminal rectum is an important site for E. coli O157 carriage in cattle. The data also support the hypothesis that high-level fecal shedding (> or =1 x 10(3) CFU g of feces(-1)) of enterohemorrhagic E. coli O157 results from colonization of this site.     

Enhanced microbial biomass assay using mutant luciferase resistant to benzalkonium chloride

In a biomass assay based on adenosine 5(')-triphosphate (ATP) bioluminescence, extracellular ATP is removed; then intracellular ATP is extracted from the microorganism by an ATP extractant and subsequently reacted with luciferase. To provide a highly sensitive assay, the concentration of benzalkonium chloride (BAC) in the ATP extractant was optimized by using a mutant luciferase resistant to BAC. The use of 0.2% BAC, which was acceptable for the luciferase, simultaneously achieved the maximum extraction of intracellular ATP from microorganisms and the inactivation of the ATP-eliminating enzymes for removal of extracellular ATP. The detection limit (blank+3 SD) for ATP was 1.8x10(-14)M (1.8x10(-18)mol/assay) in the presence of the ATP extractant with coefficients of variation of 0.7 to 6.3%. The reagent system coupled with the ATP-eliminating enzymes allowed for the detection of 93 colony-forming units (CFU)/ml of Escherichia coli ATCC 25922, 170CFU/ml of Pseudomonas aeruginosa ATCC 27853, 170CFU/ml of Proteus mirabilis ATCC 29906, 68CFU/ml of Staphylococcus aureus ATCC 25923, and 7.7CFU/ml of Bacillus subtilis ATCC 6051. The yeast cell of Saccharomyces cerevisiae IFO 10217 could be detected at 1CFU/ml. With 54 kinds of microorganisms, the average ATP extraction efficiency compared to the trichloroacetic acid extraction method was 81.0% in 24 strains among gram-negative bacteria, 99.4% in 13 strains among gram-positive bacteria, and 97.0% in 17 strains among yeast. The ATP contents of the gram-negative bacteria, gram-positive bacteria, and yeasts ranged from 0.40 to 2.70x10(-18)mol/CFU (mean=1.5x10(-18)mol/CFU), from 0.41 to 16.7x10(-18)mol/CFU (mean=5.5x10(-18)mol/CFU), and from 0.714 to 54.6x10(-16)mol/CFU (mean=8.00x10(-16)mol/CFU), respectively.     

Evaluation of carriers used in the test methods of the Association of Official Analytical Chemists.

Revision of the official test method for the determination of the tuberculocidal activity of disinfectants is being undertaken. The current procedure lacks precision and accuracy and is not quantitative. Variability associated with carriers and the lack of temperature control were evaluated in this paper. The use of porcelain versus stainless steel carriers was also evaluated. When carriers of either type were contaminated with Mycobacterium bovis BCG, the number of organisms on the carriers varied by as much as 1.0 on the log10 scale. The average number of organisms attached to each porcelain carried was 1.10 x 10(5) CFU (range, 2.7 x 10(4) to 2.7 x 10(5) CFU), whereas the average number of organisms attached to each stainless steel carrier was 1.38 x 10(5) CFU (range, 2.9 x 10(4) to 4.0 x 10(5) CFU). The average number of cells attached to the carrier was directly proportional to the number of cells in the contaminating cell suspension. Variations in drying time did not alter the number of cells attached to the carrier. When porcelain carriers were placed in a test solution, the average number of organisms washed from the carriers was 55% of the total, with a range of 19 to 80%, whereas for stainless steel carriers, the average number was 82% of the total, with a range of 52 to 96%. Data for B. subtilis spores were similar to those for M. bovis BCG, suggesting that there may be similar problems with the Association of Official Analytical Chemists sporicidal test, which uses carriers. It was also found that the lack of an exacting temperature control could influence the outcome of the test. Changes in temperature as little as 1 degree C could influence the rate of killing of M. bovis BCG.     

Evaluation of carriers used in the test methods of the Association of Official Analytical Chemists

Revision of the official test method for the determination of the tuberculocidal activity of disinfectants is being undertaken. The current procedure lacks precision and accuracy and is not quantitative. Variability associated with carriers and the lack of temperature control were evaluated in this paper. The use of porcelain versus stainless steel carriers was also evaluated. When carriers of either type were contaminated with Mycobacterium bovis BCG, the number of organisms on the carriers varied by as much as 1.0 on the log10 scale. The average number of organisms attached to each porcelain carried was 1.10 x 10(5) CFU (range, 2.7 x 10(4) to 2.7 x 10(5) CFU), whereas the average number of organisms attached to each stainless steel carrier was 1.38 x 10(5) CFU (range, 2.9 x 10(4) to 4.0 x 10(5) CFU). The average number of cells attached to the carrier was directly proportional to the number of cells in the contaminating cell suspension. Variations in drying time did not alter the number of cells attached to the carrier. When porcelain carriers were placed in a test solution, the average number of organisms washed from the carriers was 55% of the total, with a range of 19 to 80%, whereas for stainless steel carriers, the average number was 82% of the total, with a range of 52 to 96%. Data for B. subtilis spores were similar to those for M. bovis BCG, suggesting that there may be similar problems with the Association of Official Analytical Chemists sporicidal test, which uses carriers. It was also found that the lack of an exacting temperature control could influence the outcome of the test. Changes in temperature as little as 1 degree C could influence the rate of killing of M. bovis BCG.     

Effect of different salinities of a dynamic water system on biofilm formation

AISI-1020 carbon steel coupons were fixed onto a water circulation loop in order to study the effect of varying NaCl concentrations on formation of biofilms by natural populations of microorganisms. Overall, we observed a reduction in the number of bacteria attached to the metal surfaces as NaCl levels increased. At 12.85 and 80 g/l NaCl, the respective bacterial counts were: 1.7×10⁹ CFU/cm² and 7.5×10² CFU/cm² for aerobic species; 1.3×10⁴ CFU/cm² and 2.1×10 CFU/cm² for anaerobic species; and 1.8×10³ CFU/cm² and 4.6×10 CFU/cm² for sulfate-reducing species. However, the opposite trend was observed for the numbers of iron-reducing bacteria: 4.1×10⁶ CFU/cm² at 12.85 g/l NaCl and 7.5 10⁸ CFU/cm² at 80 g/l NaCl, respectively. Fungal counts remained constant throughout the experimental period. The salt concentration at which the maximum corrosion rate was observed was 35 g/l. In view of the marked loss of metal mass recorded at this salinity, AISI-1020 carbon steel proved to belong to the group of alloys less resistant to corrosion. Journal of Industrial Microbiology & Biotechnology (2000) 25, 45–48. Received 07 December 1999/ Accepted in revised form 25 April 2000