Membrane-anchoring interactions of M13 major coat protein

The response to hydrophobic mismatch of membrane-bound M13 major coat protein is measured using site-directed fluorescence and ESR spectroscopy. For this purpose, we investigate the membrane-anchoring interactions of M13 coat protein in model systems consisting of phosphatidylcholine bilayers that vary in hydrophobic thickness. Mutant coat proteins are prepared with an AEDANS-labeled single cysteine residue in the hinge region of the protein or at the C-terminal side of the transmembrane helix. In addition, the fluorescence of the tryptophan residue is studied as a monitor for the N-terminal side of the transmembrane helix. The fluorescence results show that the hinge region and C-terminal side of the transmembrane helix hardly respond to hydrophobic mismatch. In contrast, the N-terminal side of the helical transmembrane domain shifts to a more apolar environment, when the hydrophobic thickness is increased. The apparent strong membrane-anchoring interactions of the C-terminus are confirmed using a mutant that contains a longer transmembrane domain. As a result of this mutation, the tryptophan residue at the N-terminal side of the helical domain clearly shifts to a more polar environment, whereas the labeled position 46 at the C-terminal side is not affected. The phenylalanines in the C-terminal part of the protein play an important role in these apparent strong anchoring interactions. This is demonstrated with a mutant in which both phenylalanines are replaced by alanine residues. The phenylalanine residues in the C-terminus affect the location in the membrane of the entire transmembrane domain of the protein.     

Structure and Dynamics of the Membrane-Bound Form of Pf1 Coat Protein: Implications of Structural Rearrangement for Virus Assembly

The three-dimensional structure of the membrane-bound form of the major coat protein of Pf1 bacteriophage was determined in phospholipid bilayers using orientation restraints derived from both solid-state and solution NMR experiments. In contrast to previous structures determined solely in detergent micelles, the structure in bilayers contains information about the spatial arrangement of the protein within the membrane, and thus provides insights to the bacteriophage assembly process from membrane-inserted to bacteriophage-associated protein. Comparisons between the membrane-bound form of the coat protein and the previously determined structural form found in filamentous bacteriophage particles demonstrate that it undergoes a significant structural rearrangement during the membrane-mediated virus assembly process. The rotation of the transmembrane helix (Q16-A46) around its long axis changes dramatically (by 160°) to obtain the proper alignment for packing in the virus particles. Furthermore, the N-terminal amphipathic helix (V2-G17) tilts away from the membrane surface and becomes parallel with the transmembrane helix to form one nearly continuous long helix. The spectra obtained in glass-aligned planar lipid bilayers, magnetically aligned lipid bilayers (bicelles), and isotropic lipid bicelles reflect the effects of backbone motions and enable the backbone dynamics of the N-terminal helix to be characterized. Only resonances from the mobile N-terminal helix and the C-terminus (A46) are observed in the solution NMR spectra of the protein in isotropic q > 1 bicelles, whereas only resonances from the immobile transmembrane helix are observed in the solid-state ¹H/¹⁵N-separated local field spectra in magnetically aligned bicelles. The N-terminal helix and the hinge that connects it to the transmembrane helix are significantly more dynamic than the rest of the protein, thus facilitating structural rearrangement during bacteriophage assembly.     

Localization and rearrangement modulation of the N-terminal arm of the membrane-bound major coat protein of bacteriophage M13

During infection the major coat protein of the filamentous bacteriophage M13 is in the cytoplasmic membrane of the host Escherichia coli. This study focuses on the configurational properties of the N-terminal part of the coat protein in the membrane-bound state. For this purpose X-Cys substitutions are generated at coat protein positions 3, 7, 9, 10, 11, 12, 13, 14, 15, 17, 19, 21, 22, 23 and 24, covering the N-terminal protein part. All coat protein mutants used are successfully produced in mg quantities by overexpression in E. coli. Mutant coat proteins are labeled and reconstituted into mixed bilayers of phospholipids. Information about the polarity of the local environment around the labeled sites is deduced from the wavelength of maximum emission using AEDANS attached to the SH groups of the cysteines as a fluorescent probe. Additional information is obtained by determining the accessibility of the fluorescence quenchers acrylamide and 5-doxyl stearic acid. By employing uniform coat protein surroundings provided by TFE and SDS, local effects of the backbone of the coat proteins or polarity of the residues could be excluded. Our data suggest that at a lipid to protein ratio around 100, the N-terminal arm of the protein gradually enters the membrane from residue 3 towards residue 19. The hinge region (residues 17-24), connecting the helical parts of the coat protein, is found to be more embedded in the membrane. Substitution of one or more of the membrane-anchoring amino acid residues lysine 8, phenylalanine 11 and leucine 14, results in a rearrangement of the N-terminal protein part into a more extended conformation. The N-terminal arm can also be forced in this conformation by allowing less space per coat protein at the membrane surface by decreasing the lipid to protein ratio. The influence of the phospholipid headgroup composition on the rearrangement of the N-terminal part of the protein is found to be negligible within the range thought to be relevant in vivo. From our experiments we conclude that membrane-anchoring and space-limiting effects are key factors for the structural rearrangement of the N-terminal protein part of the coat protein in the membrane.     

Membrane assembly of the bacteriophage Pf3 major coat protein

The Pf3 major coat protein of the Pf3 bacteriophage is stored in the inner membrane of the infected cell during the reproductive cycle. The protein consists of 44 amino acids, and contains an acidic amphipathic N-terminal domain, a hydrophobic domain, and a short basic C-terminal domain. The mainly alpha-helical membrane-bound protein traverses the membrane once, leaving the C-terminus in the cytoplasm and the N-terminus in the periplasm. A cysteine-scanning approach was followed to measure which part of the membrane-bound Pf3 protein is inside or outside the membrane. In this approach, the fluorescence probe N-[(iodoacetyl)amino]ethyl-1-sulfonaphthylamine (IAEDANS) was attached to single-cysteine mutants of the Pf3 coat protein. The labeled mutant coat proteins were reconstituted into the phospholipid DOPC/DOPG (80/20 molar ratio) and DOPE/DOPG (80/20 molar ratio) model membranes. We subsequently studied the fluorescence characteristics at the different positions in the protein. We measured the local polarity of the environment of the probe, as well as the accessibility of the probe to the fluorescence quencher acrylamide. The results of this study show a single membrane-spanning protein with both the C- and N-termini remaining close to the surface of the membrane. A nearly identical result was seen previously for the membrane-bound M13 coat protein. On the basis of a comparison between the results from both studies, we suggest an "L-shaped" membrane-bound model for the Pf3 coat protein. DOPE-containing model membranes revealed a higher polarity, and quenching efficiency at the membrane/water interface. Furthermore, from the outside to the inside of the membrane, a steeper polarity gradient was measured at the PE/PG interface as compared to the PC/PG interface. These results suggest a thinner interface for DOPE/DOPG than for DOPC/DOPG membranes.     

Conformation and orientation of the gene 9 minor coat protein of bacteriophage M13 in phospholipid bilayers

The membrane-bound state of the gene 9 minor coat protein of bacteriophage M13 was studied in model membrane systems, which varied in lipid head group and lipid acyl chain composition. By using FTIR spectroscopy and subsequent band analysis a quantitative analysis of the secondary structure of the protein was obtained. The secondary structure of the gene 9 protein predominantly consists of alpha-helical (67%) and turn (33%) structures. The turn structure is likely to be located C-terminally where it has a function in recognizing the phage DNA during bacteriophage assembly. Attenuated total reflection FTIR spectroscopy was used to determine the orientation of gene 9 protein in the membrane, revealing that the alpha-helical domain is mainly transmembrane. The conformational and orientational measurements result in two models for the gene 9 protein in the membrane: a single transmembrane helix model and a two-helix model consisting of a 15 amino acid long transmembrane helix and a 10 amino acid long helix oriented parallel to the membrane plane. Potential structural consequences for both models are discussed.     

Association of the major coat protein of fd bacteriophage with phospholipid vesicles

The association of the major coat protein of fd bacteriophage with a phospholipid bilayer was investigated by analyzing the protein's susceptibility to proteolysis and its circular dichroism spectrum when incorporated into single-walled phospholipid vesicles. In the limits tested, this association appeared to be independent of the mass ratio of protein to lipid and of vesicle size, phospholipid composition, and method of preparation. The circular dichroism data are consistent with a similar "membrane-bound" conformation for all cases of vesicle-associated coat protein and for deoxycholate micelle-associated coat protein. Proteolysis of coat protein associated with deoxycholate micelles and with phospholipid vesicles defined the central hydrophobic core presumed to represent that portion of the protein which associates with membrane bilayers in vivo. The isolated core, which assumed a predominantly beta-type conformation in detergent solution, maintained a beta conformation when associated with a vesicle phospholipid bilayer.     

Proton-decoupled 15N and 31P solid-state NMR investigations of the Pf3 coat protein in oriented phospholipid bilayers

The coat proteins of filamentous phage are first synthesized as transmembrane proteins and then assembled onto the extruding viral particles. We investigated the transmembrane conformation of the Pseudomonas aeruginosa Pf3 phage coat protein using proton-decoupled 15N and 31P solid-state NMR spectroscopy. The protein was either biochemically purified and uniformly labelled with 15N or synthesized chemically and labelled at specific sites. The proteins were then reconstituted into oriented phospholipid bilayers and the resulting samples analysed. The data suggest a model in which the protein adopts a tilted helix with an angle of approximately 30 degrees and an N-terminal 'swinging arm' at the membrane surface.     

Comparative structural studies of Vpu peptides in phospholipid monolayers by x-ray scattering

Vpu is an 81-residue HIV-1 accessory protein, its transmembrane and cytoplasmic domains each responsible for one of its two functions. Langmuir monolayers of phospholipid incorporating a membrane protein with a unidirectional vectorial orientation, on a semiinfinite aqueous subphase, provide one "membranelike" environment for the protein. The cytoplasmic domain's interaction with the surface of the phospholipid monolayer in determining the tertiary structure of the peptide within the monolayer was investigated, employing a comparative structural study of Vpu with its submolecular fragments Tm and TmCy truncated to different extents in the cytoplasmic domain, via synchrotron x-ray scattering utilizing a new method of analysis. Localizations of the transmembrane and cytoplasmic domains within the monolayer profile structure were similar for all three proteins, the hydrophobic transmembrane helix within the hydrocarbon chain region tilted with respect to the monolayer plane and the helices of the cytoplasmic domains lying on the surface of the headgroups parallel to the monolayer plane. The thickness of the hydrocarbon chain region, determined by the tilt of the hydrocarbon chains and transmembrane domain with respect to the monolayer plane, was slightly different for Tm, TmCy, and Vpu systematically with protein/lipid mole ratio. Localization of the helices in the cytoplasmic domains of the three proteins relative to the headgroups depends on their extents and amphipathicities. Thus, the interaction of the cytoplasmic domain of Vpu on the surface may affect the tilt of the transmembrane helix within the hydrocarbon chain region in determining its tertiary structure in the membrane.     

Characterization of a membrane protein folding motif, the Ser zipper, using designed peptides

Polar residues play important roles in the association of transmembrane helices and the stabilities of membrane proteins. Although a single Ser residue in a transmembrane helix is unable to mediate a strong association of the helices, the cooperative interactions of two or more appropriately placed serine hydroxyl groups per helix has been hypothesized to allow formation of a "serine zipper" that can stabilize transmembrane helix association. In particular, a heptad repeat Sera Xxx Xxx Leud Xxx Xxx Xxx (Xxx is a hydrophobic amino acid) appears in both antiparallel helical pairs of polytopic membrane proteins as well as the parallel helical dimerization motif found in the murine erythropoietin receptor. To examine the intrinsic conformational preferences of this motif independent of its context within a larger protein, we synthesized a peptide containing three copies of a SeraLeud heptad motif. Computational results are consistent with the designed peptide adopting either a parallel or antiparallel structure, and conformational search calculations yield the parallel dimer as the lowest energy configuration, which is also significantly more stable than the parallel trimer. Analytical ultracentrifugation indicated that the peptide exists in a monomer-dimer equilibrium in dodecylphosphocholine micelles. Thiol disulfide interchange studies showed a preference for forming parallel dimers in micelles. In phospholipid vesicles, only the parallel dimer was formed. The stability of the SerZip peptide was studied in vesicles prepared from phosphatidylcholine (PC) lipids of different chain length: POPC (C16:0C18:1 PC) and DLPC (C12:0PC). The stability was greater in POPC, which has a good match between the length of the hydrophobic region of the peptide and the bilayer length. Finally, mutation to Ala of the Ser residues in the SerZip motif gave rise to a relatively small decrease in the stability of the dimer, indicating that packing interactions rather than hydrogen-bonding provided the primary driving force for association.     

Identification of the hydrophobic thickness of a membrane protein using fluorescence spectroscopy: studies with the mechanosensitive channel MscL

The hydrophobic thickness of a membrane protein is an important parameter, defining how the protein sits within the hydrocarbon core of the lipid bilayer that surrounds it in a membrane. Here we show that Trp scanning mutagenesis combined with fluorescence spectroscopy can be used to define the hydrophobic thickness of a membrane protein. The mechanosensitive channel of large conductance (MscL) contains two transmembrane alpha-helices, of which the second (TM2) is lipid-exposed. The region of TM2 that spans the hydrocarbon core of the bilayer when MscL is reconstituted into bilayers of dioleoylphosphatidylcholine runs from Leu-69 to Leu-92, giving a hydrophobic thickness of ca. 25 A. The results obtained using Trp scanning mutagenesis were confirmed using Cys residues labeled with the N-methyl-amino-7-nitroben-2-oxa-1,3-diazole [NBD] group; both fluorescence emission maxima and fluorescence lifetimes for the NBD group are sensitive to solvent dielectric constant over the range (2-40) thought to span the lipid headgroup region of a lipid bilayer. Changing phospholipid fatty acyl chain lengths from C14 and C24 results in no significant change for the fluorescence of the interfacial residues, suggesting very efficient hydrophobic matching between the protein and the surrounding lipid bilayer.     

Asymmetric dipping of bacteriophage M13 coat protein with increasing lipid bilayer thickness

Knowledge about the vertical movement of a protein with respect to the lipid bilayer plane is important to understand protein functionality in the biological membrane. In this work, the vertical displacement of bacteriophage M13 major coat protein in a lipid bilayer is used as a model system to study the molecular details of its anchoring mechanism in a homologue series of lipids with the same polar head group but different hydrophobic chain length. The major coat proteins were reconstituted into 14:1PC, 16:1PC, 18:1PC, 20:1PC, and 22:1PC bilayers, and the fluorescence spectra were measured of the intrinsic tryptophan at position 26 and BADAN attached to an introduced cysteine at position 46, located at the opposite ends of the transmembrane helix. The fluorescence maximum of tryptophan shifted for 700 cm^-1 on going from 14:1PC to 22:1PC, the corresponding shift of the fluorescence maximum of BADAN at position 46 was approximately 10 times less (∼ 70 cm^-1). Quenching of fluorescence with the spin label CAT 1 indicates that the tryptophan is becoming progressively inaccessible for the quencher with increasing bilayer thickness, whereas quenching of BADAN attached to the T46C mutant remained approximately unchanged. This supports the idea that the BADAN probe at position 46 remains at the same depth in the bilayer irrespective of its thickness and clearly indicates an asymmetrical nature of the protein dipping in the lipid bilayer. The anchoring strength at the C-terminal domain of the protein (provided by two phenylalanine residues together with four lysine residues) was estimated to be roughly 5 times larger than the anchoring strength of the N-terminal domain.     

FRET study of membrane proteins: simulation-based fitting for analysis of membrane protein embedment and association

A new formalism for the simultaneous determination of the membrane embedment and aggregation of membrane proteins is developed. This method is based on steady-state F?rster (or fluorescence) resonance energy transfer (FRET) experiments on site-directed fluorescence labeled proteins in combination with global data analysis utilizing simulation-based fitting. The simulation of FRET was validated by a comparison with a known analytical solution for energy transfer in idealized membrane systems. The applicability of the simulation-based fitting approach was verified on simulated FRET data and then applied to determine the structural properties of the well-known major coat protein from bacteriophage M13 reconstituted into unilamellar DOPC/DOPG (4:1 mol/mol) vesicles. For our purpose, the cysteine mutants Y24C, G38C, and T46C of this protein were produced and specifically labeled with the fluorescence label AEDANS. The energy transfer data from the natural tryptophan at position 26, which is used as a donor, to AEDANS were analyzed assuming a helix model for the transmembrane domain of the protein. As a result of the FRET data analysis, the topology and bilayer embedment of this domain were quantitatively characterized. The resulting tilt of the transmembrane helix of the protein is 18 +/- 2 degrees. The tryptophan is located at a distance of 8.5 +/- 0.5 A from the membrane center. No specific aggregation of the protein was found. The methodology developed here is not limited to M13 major coat protein and can be used in principle to study the bilayer embedment of any small protein with a single transmembrane domain.     

Fluorescence resonance energy transfer shows a close helix-helix distance in the transmembrane M13 procoat protein

During the membrane insertion process the major coat protein of bacteriophage M13 assumes a conformation in which two transmembrane helices corresponding to the leader sequence and the anchor region in the mature part of the protein coming into close contact with each other. Previous studies on the molecular mechanism of membrane insertion of M13 procoat protein have shown that this interaction between the two helices might drive the actual translocation process. We investigated the intramolecular distance between the two helices of the transmembrane procoat protein by measuring fluorescence resonance energy transfer (FRET) between the donor (Tyr) placed in one helix and the acceptor (Trp) placed in the other helix. Various mutant procoat proteins with differently positioned donor-acceptor pairs were generated, purified, and reconstituted into artificial lipid bilayers. The results obtained from the FRET measurements, combined with molecular modeling, show that the transmembrane helices are in close contact on the order of 1-1.5 nm. The present approach might be of general interest for determining the topology and the folding of membrane proteins.     

Comparison of the dynamics of the membrane-bound form of fd coat protein in micelles and in bilayers by solution and solid-state nitrogen-15 nuclear magnetic resonance spectroscopy

Solid-state and solution 15N nuclear magnetic resonance experiments on uniformly and specifically 15N labeled coat protein in phospholipid bilayers and in detergent micelles are used to describe the dynamics of the membrane-bound form of the protein. The residues in the N- and C-terminal portions of the coat protein in both phospholipid bilayers and in detergent micelles are mobile, while those in the hydrophobic midsection are immobile. There is evidence for a gradient of mobility in the C-terminal region of the coat protein in micelles; at 25 degrees C only the last two residues are mobile on the 10(9)-Hz timescale, while the last six to eight residues appear to be mobile on slower timescales and highly mobile at higher temperatures. Since all of the C-terminal residues are immobile in the virus particles, the mobility of these residues in the membrane-bound form of the protein may be important for the formation of protein-DNA interactions in the assembly process.     

Detergent Properties Influence the Stability of the Glycophorin A Transmembrane Helix Dimer in Lysophosphatidylcholine Micelles

Detergents might affect membrane protein structures by promoting intramolecular interactions that are different from those found in native membrane bilayers, and fine-tuning detergent properties can be crucial for obtaining structural information of intact and functional transmembrane proteins. To systematically investigate the influence of the detergent concentration and acyl-chain length on the stability of a transmembrane protein structure, the stability of the human glycophorin A transmembrane helix dimer has been analyzed in lyso-phosphatidylcholine micelles of different acyl-chain length. While our results indicate that the transmembrane protein is destabilized in detergents with increasing chain-length, the diameter of the hydrophobic micelle core was found to be less crucial. Thus, hydrophobic mismatch appears to be less important in detergent micelles than in lipid bilayers and individual detergent molecules appear to be able to stretch within a micelle to match the hydrophobic thickness of the peptide. However, the stability of the GpA TM helix dimer linearly depends on the aggregation number of the lyso-PC detergents, indicating that not only is the chemistry of the detergent headgroup and acyl-chain region central for classifying a detergent as harsh or mild, but the detergent aggregation number might also be important.     

Effect of cessation of phospholipid synthesis on the synthesis of a specific membrane-associated bacteriophage protein in Escherichia coli.

The major coat protein of the bacteriophage f1 is synthesized during infection of Escherichia coli and becomes tightly associated with the host membrane. This synthesis was studied in conjunction with the strain BB26-36, a mutant defective in phospholipid synthesis, to investigate basic questions concerning membrane protein and phospholipid synthesis. Coat protein synthesis is decreased in the absence of net phospholipid synthesis. The coat protein produced under these conditions is still found tightly associated with the membrane. Resumption of phospholipid synthesis leads to an increase in the synthesis and accumulation of the coat protein. Therefore, a correlation between coat protein and phospholipid synthesis seems to exist. However, the packaging of phage deoxyribonucleic acid into phage particles proceeds in the absence of phospholipid synthesis, and the number of phage particles produced appears to depend only on the amount of coat protein in the membrane.     

Structure of the integrin beta3 transmembrane segment in phospholipid bicelles and detergent micelles

Integrin adhesion receptors transduce bidirectional signals across the plasma membrane, with the integrin transmembrane domains acting as conduits in this process. Here, we report the first high-resolution structure of an integrin transmembrane domain. To assess the influence of the membrane model system, structure determinations of the beta3 integrin transmembrane segment and flanking sequences were carried out in both phospholipid bicelles and detergent micelles. In bicelles, a 30-residue linear alpha-helix, encompassing residues I693-H772, is adopted, of which I693-I721 appear embedded in the hydrophobic bicelle core. This relatively long transmembrane helix implies a pronounced helix tilt within a typical lipid bilayer, which facilitates the snorkeling of K716's charged side chain out of the lipid core while simultaneously immersing hydrophobic L717-I721 in the membrane. A shortening of bicelle lipid hydrocarbon tails does not lead to the transfer of L717-I721 into the aqueous phase, suggesting that the reported embedding represents the preferred beta3 state. The nature of the lipid headgroup affected only the intracellular part of the transmembrane helix, indicating that an asymmetric lipid distribution is not required for studying the beta3 transmembrane segment. In the micelle, residues L717-I721 are also embedded but deviate from linear alpha-helical conformation in contrast to I693-K716, which closely resemble the bicelle structure.     

Functional competition within a membrane: Lipid recognition vs. transmembrane helix oligomerization

Binding of specific lipids to large, polytopic membrane proteins is well described, and it is clear that such lipids are crucial for protein stability and activity. In contrast, binding of defined lipid species to individual transmembrane helices and regulation of transmembrane helix monomer–oligomer equilibria by binding of distinct lipids is a concept, which has emerged only lately. Lipids bind to single-span membrane proteins, both in the juxta-membrane region as well as in the hydrophobic membrane core. While some interactions counteract transmembrane helix oligomerization, in other cases lipid binding appears to enhance oligomerization. As reversible oligomerization is involved in activation of many membrane proteins, binding of defined lipids to single-span transmembrane proteins might be a mechanism to regulate and/or fine-tune the protein activity. But how could lipid binding trigger the activity of a protein? How can binding of a single lipid molecule to a transmembrane helix affect the structure of a transmembrane helix oligomer, and consequently its signaling state? These questions are discussed in the present article based on recent results obtained with simple, single-span transmembrane proteins. This article is part of a Special Issue entitled: Lipid–protein interactions.     

Secondary structure of filamentous bacteriophage coat protein is preserved in lipid environments

1H nuclear magnetic resonance experiments have shown that the amide hydrogens of residues 30 to 40 of bacteriophage Pf1 coat protein in micelles undergo very slow exchange with solvent deuterons. The amide 1H resonances from these residues were used to monitor the structural stability of the membrane-spanning helix of the coat protein during the transition of the coat protein from its structural form, in the virus particle, to the membrane-bound form, in micelles. The helix was found to remain folded on the 10(-3) second time-scale of the experiment, which indicates that no major disruption or rearrangement of the central part of the protein structure occurs during the process of coat protein solubilization by detergent. The results also suggest that a helical peptide can associate with lipids without reorganization of its secondary structure. However, a general model for the insertion of proteins into membranes cannot be established from these results, because the mechanism of the detergent solubilization process may differ somewhat from that of the membrane insertion process.