Improvements in two-dimensional gel electrophoresis by utilizing a low cost "in-house" neutral pH sodium dodecyl sulfate-polyacrylamide gel electrophoresis system

Two-dimensional gel electrophoresis (2-DE) is widely used for initial protein separation in proteomics. Commercial products using neutral pH sodium dodecyl sulfate-polyacrylamide gel electrophoresis ((SDS-PAGE)/(Bis (2-hydroxyethyl) imino-tris (hydroxymethyl) methane-HCl, or Bis-Tris)) have greatly improved this technique, but cost and limited sizes restrict their applications. An "in-house" system is presented, resulting in better resolution, separation, and new spot visualization and improved resolution when compared to Tris-HCl gels. Their utility is demonstrated using albumin-depleted serum samples, rabbit heart left ventricle, and human immunodeficiency virus type 1 (HIV-1).     

Lysozyme oligomers as a molecular mass standard for sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Egg white lysozyme treated with hypochlorous acid links together producing di-, tri-, tetra-, and pentameric derivatives with molecular masses ranging from 14,300 to 90,500. Similar oligomeric products may be obtained by treating lysozyme color derivatives produced by labeling lysozyme with fluorescein, trinitrobenzenesulfonic acid and 2,4-dinitrofluorobenzene, with hypochlorous acid. The oligomeric lysozyme derivatives thus obtained consist of a mixture of proteins with molecular masses equal to multiples of 14,300 (lysozyme molecular mass). This mixture can be applied as a set of molecular mass standards suitable for determination of protein molecular masses on sodium dodecyl sulfate-polyacrylamide gel electrophoresis.     

Modification of a discontinuous and highly porous sodium dodecyl sulfate-polyacrylamide gel system for minigel electrophoresis

A highly porous and efficient discontinuous sodium dodecyl sulfate-polyacrylamide slab gel electrophoresis system was recently described by J. P. Doucet and J. M. Trifaró [1988) Anal. Biochem. 168, 265-271). The system was developed to separate with high and broad resolution the components from large volume samples after an overnight electrophoresis. This system was found to have many advantages. However, when used directly as a minigel system, this method cannot sustain the high voltage inherent to minigel electrophoresis and produces artefacts, namely a double front and a loss of resolution in the low molecular weight range. These problems were eliminated using the buffer system of M. A. Porzio and A.M. Pearson [1977) Biochem. Biophys. Acta 490, 27-34) in the separating gel and in the electrode chambers. The resulting modified discontinuous minigel system has the same advantages as the technique described for large slab gel electrophoresis, including the effective and rapid transfer of high molecular weight proteins to nitrocellulose membranes, as well as the advantages of the minigel format.     

Prefractionation of protein samples for proteome analysis by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

To isolate high molecular weight (HMW) or low-abundance proteins we exploited the high resolving power provided by the molecular sieves of polyacrylamide gel matrices. Rice-leaf protein extracts were applied to a single well of an SDS-polyacrylamide gel with prestained molecular size markers at both ends. After electrophoresis, the gel was cut into 4 segments according to size, and each segment was ground in extraction buffer. The eluted proteins were separated from the gel matrix by centrifugation followed by acetone precipitation, and the precipitated proteins were subjected to SDS-PAGE and 2-DE. The SDS-PAGE-based prefractionation method provided non-overlapping discrete sample pools. About 27% more protein spots were detected in the fractionated samples than in the unfractionated samples, and 17% were enhanced. The improvement was especially prominent in the case of HMW proteins. Well-separated HMW proteins were analyzed by MALDI-TOF mass spectrometry. The molecular masses of the identified proteins in the > 48 kDa gel segment were distributed between 50 and 112 kDa, thus validating this prefractionation method. Identified HMW proteins with similar mass but different pI were mostly isoforms. Thus SDS-PAGE-based size prefractionation provides improved separation and detection of HMW proteins.     

Isolation of a type-specific antigen from Chlamydia trachomatis by sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

This report describes the isolation of a type-specific antigen of a serotype A strain of Chlamydia trachomatis. The antigen could be identified in sodium dodecyl sulfate-polyacrylamide electrophoretic (SDS-PAGE) analysis of immunoprecipitates of homologously reacted lysates from Bolton-Hunter 125I-labeled elementary bodies, solubilized by sonication and treatment with Nonidet P40. The electrophoretic pattern of this precipitate revealed a peak of unique mobility that was not reproduced by heterologous or control precipitates. Immunoadsorbtion of test antigen with purified IgG fractions from homologous antisera completely removed this peak, whereas similar adsorbtion wth heterologous IgG had minimal effect. Comparison of this antigen in SDS-PAGE with protein standards revealed an approximate m.w. of 27,000.     

Analysis of the subunit structure of protochlorophyllide holochrome by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

The subunit structures of protochlorophyllide holochrome (PCH) and chlorophyllide holochrome (CH) were studied by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. PCH from leaves of dark-grown (Phaseolus vulgaris var. red kidney) is a polymeric pigment-protein complex of approximately 600,000 daltons. It is composed of 12 to 14 polypeptides of 45,000 daltons, when examined prior to and immediately following photoconversion. The protochlorophyllide or chlorophyllide pigment molecules are associated with these polypeptides. Subsequent to photoconversion, the absorption maximum of newly formed chlorophyllide shifts from 678 nm to 674 nm upon standing in darkness. Following the 678 to 674 spectral shift, the chlorophyllide is associated with a polypeptide with a molecular weight of 16,000 daltons. In addition, sucrose gradient centrifugation of PCH and CH under nondenaturing conditions indicates that during the course of the dark spectroscopic shift, the 600,000 dalton CH undergoes dissociation into a small chlorophyllide protein. The dissociation of CH, the change in the molecular weight of the chlorophyllide polypeptide from 45,000 to 16,000 daltons, as well as the dark spectroscopic shift are temperature-dependent and blocked below 0 C. It was also found that each holochrome molecule of 600,000 daltons contains at least four protochlorophyllide pigment molecules.     

Detection of lipopolysaccharides by ethidium bromide staining after sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

A rapid and easy method for staining lipopolysaccharides with ethidium bromide is described. Lipopolysaccharides could be visualized by ethidium bromide with almost the same sensitivity as found with the silver-staining method in less than 30 min. The ethidium bromide-staining method was particularly suitable for staining lipopolysaccharides possessing acidic O-specific polysaccharides, which were poorly visualized by silver staining.     

An efficient two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis method for simultaneous peptide mapping of protein contained in a mixture

A method for simultaneous peptide mapping of polypeptides contained in a mixture is presented. The polypeptides were first separated by conventional sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The strip of gel containing these unstained polypeptide bands was subsequently embedded perpendicular to the direction of electrophoresis in the stacking gel of a second gel. The proteolytic enzymes, loaded on top of the second gel, were brought in contact with the substrates through moving boundary electrophoresis. The peptides thus generated were then resolved by electrophoresis in a gradient gel. A polychromatic silver staining method added an extra dimension to the identification and characterization of the peptides in the maps obtained in that specific peptides got specific colors. Moreover, the sensitivity of this method was illustrated by the demonstration that original quantities in the submicrogram range of nonradioactive proteins (exemplified here by the structural proteins of densonucleosis virus) largely sufficed for satisfactory maps. Other advantages of this procedure over current methods included (i) the elimination of the purification step (and consequently virtually no loss or contamination), (ii) that only the strict minimum of material (necessary for the ultimate visualization of the maps) had to be used, (iii) that no special two-dimensional electrophoresis equipment was needed, and (iv) the consistency, speed, and simplicity of the method.     

Comparative analysis of protein aggregates by blue native electrophoresis and subsequent sodium dodecyl sulfate-polyacrylamide gel electrophoresis in a three-dimensional geometry gel

We describe the comparative analysis of protein aggregates by combining blue native electrophoresis and subsequent sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) using a 3-D geometry gel for simultaneous processing of many samples. The first native electrophoresis step, separating the aggregates, is carried out for a series of samples in parallel lanes within a slab gel. This gel is then placed on the top surface of a cylindrical, 3-D geometry gel for the second denaturing electrophoresis step, separating the proteins composing the aggregates. The samples migrate parallel to the vertical axis of the gel cylinder. Data are acquired online by photodetection of laser-induced fluorescence during electrophoresis. For this purpose, the samples are fluorescently labeled within the slab gel after the first separation step. A 3-D geometry gel separates the equivalent of many conventional SDS slab gels represented by vertical layers in the 3-D gel body. In this way, many samples are analyzed in the same gel under identical conditions, improving comparability and resolution and making the process considerably more efficient. This novel technique allowed the identification of several aggregate classes of recombinant proteins expressed in bacteria. We observed that proteins preferentially bind to homolog polypeptides, but also seem to form a trapping mesh co-aggregating with other proteins. The aggregation pattern revealed by this technique supplements data obtained from standard two-dimensional gel electrophoresis analysis. We expect interesting applications, for instance in aggregate monitoring of clinical samples. It should be feasible to quickly gain a diagnostic picture during amyloid-related neurodegenerative disease development or to observe drug effects on protein aggregation.     

Identification of the clathrin assembly protein AP180 in crude calf brain extracts by two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis

We present a two-dimensional gel electrophoretic method which affords a diagnostic means for the identification of the neuron-specific clathrin assembly protein AP180 in crude cytosolic and microsomal fractions of bovine brain. The method is based on the finding that in the presence of sodium dodecyl sulfate (SDS) in a newly developed continuous high salt Tris-acetate-EDTA buffer system protein AP180 migrates at a rate corresponding to its molecular weight of approximately 120,000, while in other more commonly used SDS-polyacrylamide gel electrophoresis methods it behaves anomalously as a 170- to 180-kDa polypeptide. By combining electrophoresis in the Tris-acetate-EDTA system in the first dimension with either the electrophoretic system of Laemmli [Laemmli, U.K. (1970) Nature (London) 227, 680-685] or that of Neville [Neville, D.M. (1971) J. Biol. Chem. 246, 6328-6334] in the second dimension, it is possible to identify AP180 in complex protein mixtures, because it is the only major protein that fell significantly off a diagonal defined by other proteins. A comparison of the microsomal and soluble fractions examined in this manner reveals that most of the AP180 is present in the soluble fraction.     

Preparative elution of proteins from nitrocellulose membranes after separation by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Various conditions were analyzed and optimized for the preparative elution of proteins from nitrocellulose membranes after transfer from sodium dodecyl sulfate (SDS)-polyacrylamide gels. The efficiency of elution was best using pyridine or acetonitrile elution solvents, intermediate for buffer containing a mixture of sodium dodecyl sulfate, Triton X-100, and sodium deoxycholate, and negligible for buffers containing any single detergent or chaotropic salt, such as urea or guanidine hydrochloride. The efficiency of elution with any solvent also depended on the molecular weight of the proteins, smaller proteins being more easily removed from membranes. As a general procedure, proteins may be eluted from nitrocellulose membranes by incubation with either 40% acetonitrile or 50% pyridine in 0.1 M ammonium acetate, pH 8.9, for 1-3 h at 5-37 degrees C. The recommended procedures for protein elution appear to offer a rapid, simple, and efficient means of recovering proteins from complex mixtures after separation by SDS-PAGE and transfer to nitrocellulose membranes.     

New method for analyzing the molecular weights of proteins by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Previously the method for determining protein molecular weights from SDS-PAGE depended on the accidental, only partial linearity of protein movement with the logarithm of its molecular weight. A new, mathematically rigorous method with supporting data is now described demonstrating that such movement is dependent upon the reciprocal of protein size. Experimental data, therefore, follow most closely a hyperbolic curve when plotted directly; it becomes linear and passes through the origin when movement is plotted vs the reciprocal of protein molecular weight. In the earlier method determination of the error of a measurement of molecular weight is very complex and never determined. In the method presented here such error is easily estimated and it is identical in both the hyperbolic and linear forms of data presentation. This method may eventually also allow other less-significant forces controlling movement such as protein charge to be analyzed and understood.     

An improved method for separation of low-molecular-weight polypeptides by electrophoresis in sodium dodecyl sulfate-polyacrylamide gel

An improved system for SDS-polyacrylamide gel electrophoresis, capable of analyzing polypeptides having molecular weights from 1500 to 100,000 (especially showing high resolving power in the 1500 to 25,000 molecular weight range) is described. The 10 to 18% linear gradient gel containing 7 M urea with an acrylamide:bisacrylamide ratio of 20:1 and the Laemmli discontinuous buffer was used. The use of the gel with a high crosslinkage ratio is shown to be effective in lowering the leakage of low-molecular-weight polypeptides from the gel. This method has facilitated rapid detection of small amounts of low-molecular-weight polypeptides in body fluids by the use of silver stain. A procedure is presented for the elimination of false bands on the gel frequently encountered during silver staining. The separation patterns of enzymatic cleavage products of proteins, uremic plasma, and urines from nephropathy patients are illustrated. This system is also applicable in the separation of lipopolysaccharides and also for the detection of phospholipids.     

Sequence homology analysis of a heterogenous protein population by chemical and enzymic digestion using a two-dimensional sodium dodecyl sulfate-polyacrylamide gel system

A procedure for examining possible sequence homology between two or more proteins in a heterogenous protein mixture using a two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis system is described. Three different chemical reagents (cyanogen bromide, hydroxylamine, and acetic acid) and three enzymes (α-chymotrypsin, trypsin, and Staphylococcus aureus protease) have been used as the cleavage reagents for the peptide mapping studies. Potential application of this technique in conjunction with radioactive labeling and immunological studies was also demonstrated.     

Simple, time-saving dye staining of proteins for sodium dodecyl sulfate-polyacrylamide gel electrophoresis using Coomassie blue

A fixation-free and fast protein-staining method for sodium dodecyl sulfate-polyacrylamide gel electrophoresis using Coomassie blue is described. The protocol comprises staining and quick washing steps, which can be completed in 0.5 h. It has a sensitivity of 10 ng, comparable with that of conventional Coomassie Brilliant Blue G staining with phosphoric acid in the staining solution. In addition, the dye stain does not contain any amount of acid and methanol, such as phosphoric acid. Considering the speed, simplicity, and low cost, the dye stain may be of more practical value than other dye-based protein stains in routine proteomic research.     

Analyzing folding and degradation of metabolically labelled polypeptides by conventional and diagonal sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Efficient protein folding and quality control are essential for unperturbed cell viability. Defects in these processes may lead to production of aberrant polypeptides that are either degraded leading to “loss-of-function” phenotypes, or deposited in or outside cells leading to “gain-of-toxic-function” phenotypes. Elucidation of molecular mechanisms regulating folding and quality control of newly synthesized polypeptides is therefore of greatest interest. Here we describe protocols for metabolic labelling of transfected/infected mammalian cells with [³⁵S]-methionine and [³⁵S]-cysteine, for immunoisolation from detergent extracts of the selected model proteins and for the investigation of the model polypeptide’s intracellular fate in response to chaperone-deletions or to cell exposure to folding or degradation inhibitors.     

Detection of iron-sulfur center-containing subunits of mitochondrial NADH dehydrogenase by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by high-performance gel permeation chromatography

Soluble NADH dehydrogenase resolved from Complex I of the mitochondrial electron-transfer chain was subjected to gel electrophoresis in the presence of sodium dodecyl sulfate at 4 degrees C, and then the gel was stained for iron with bathophenanthroline disulfonate and thioglycolic acid. The 23,000-dalton subunit was markedly stained, and the 51,000-dalton subunit was also stained, but only slightly. High-performance gel permeation chromatography using an eluant containing 0.1% sodium dodecyl sulfate also demonstrated that these subunits contain an iron-sulfur center: the elution pattern recorded by light absorption at 400 nm gave two peaks corresponding to the positions of the subunits.