Spectrofluorimetric determination of atenolol from human urine using high‐affinity molecularly imprinted solid‐phase extraction sorbent

This study presents a novel, sensitive and selective molecularly imprinted solid‐phase extraction (MISPE)–spectrofluorimetric method for the removal and determination of atenolol from human urine. Molecularly imprinted and non‐imprinted polymers were synthesized thermally using a radical chain polymerization technique and used as solid‐phase extraction sorbents. Acrylic acid ethylene glycol dimethacrylate, dibenzoyl peroxide and dichloroethane were used as a functional monomer, cross‐linker, initiator and porogen, respectively. The calibration curve was in the range of 0.10–2.0 μg/ml for the developed method. Limit of detection and limit of quantification values were 0.032 and 0.099 μg/ml, respectively. Owing to the selectivity of the MISPE technique and the sensitivity of spectrofluorimetry, trace levels of atenolol have been successfully determined from both organic and aqueous media. Relatively high imprinting factor (4.18) and recovery results (74.5–75.3%) were obtained. In addition, intra‐ and interday precision values were 0.38–1.03% and 0.47–2.05%, respectively, proving the precision of the proposed method. Thus, a selective, sensitive and simple MISPE–spectrofluorimetric method has been developed and applied to the direct determination of atenolol from human urine.     

Synthesis of a molecularly imprinted polymer for the solid‐phase extraction of betulin and betulinic acid from plane bark

Introduction – Plant extracts are usually complex mixtures of various polarity compounds and their study often includes a purification step, such as solid‐phase extraction (SPE), to isolate interest compounds prior analytical investigations. Molecularly imprinted polymers (MIPs) are a new promising type of SPE material which offer tailor‐made selectivity for the extraction of trace active components in complex matrices. Numerous specific cavities that are sterically and chemically complementary of the target molecules, are formed in imprinted polymers. A molecularly imprinted polymer (MIP) was synthesised in order to trap a specific class of triterpene, including betulin and betulinic acid from a methanolic extract of plane bark. Methodology – Imprinted polymers were synthesised by thermal polymerisation of betulin as template, methacrylic acid (MAA) or acrylamide (AA) as functional monomer, ethylene glycol dimethacrylate as crosslinking agent and chloroform as porogen. Afterwards, MAA‐ and AA‐MIPs were compared with their non‐imprinted polymers (NIPs) in order to assess the selectivity vs betulin and its derivatives. Recovered triterpenes were analysed by HPLC during MIP‐SPE protocol. Results – After SPE optimisation, the MAA‐imprinted polymer exhibited highest selectivity and recovery (better than 70%) for betulin and best affinity for its structural analogues. Thus, a selective washing step (chloroform, acetonitrile) removed unwanted matrix compounds (fatty acids) from the SPE cartridge. The elution solvent was methanol. Finally, the MAA‐MIP was applied to fractionate a plane bark methanolic extract containing betulin and betulinic acid. Conclusion – This study demonstrated the possibility of direct extraction of betulin and its structural analogues from plant extracts by MIP technology. Copyright © 2009 John Wiley & Sons, Ltd.     

Molecularly imprinted core‐shell magnetic nanoparticles for selective extraction of triazines in soils

In this work, a propazine‐imprinted polymer was synthesized on the surface of modified magnetic nanoparticles to be used in the solid‐phase extraction of triazines in soil samples. The effect of different solvents on the selective extraction of target analytes was assessed to establish the optimum rebinding conditions. The obtained magnetic molecularly imprinted particles exhibited high selectivity for triazines and were easily collected and separated by an external magnetic field without additional centrifugation or filtration steps. Under optimum conditions, a magnetic molecularly imprinted solid‐phase extraction method was developed allowing the extraction of several triazines (desisopropylatrazine, desethylatrazine, simazine, atrazine, and propazine) from soil samples and their subsequent final determination by high‐performance liquid chromatography with diode‐array detection. Recoveries for the triazines studied were within the range 5.4% to 40.6%, with relative standard deviations lower than 7.0% (n = 3). The detection limits were within 0.1 to 3 ng g⁻¹, depending upon the triazine and the type of soil used.     

A surface molecularly imprinted polymer as chiral stationary phase for chiral separation of 1,1′‐binaphthalene‐2‐naphthol racemates

Acrylamide (AM) was copolymerized with ethylene glycol dimethacrylate (EGDMA) in the presence of (R )‐1,1′‐binaphthalene‐2‐naphthol (BINOL) as the template molecules on the surface of silica gel by a free radical polymerization to produce a chiral stationary phase based on the surface molecularly imprinted polymer (SMIP‐CSP). The SMIP‐CSP showed a much better separation factor (α = 4.28) than the CSP based on the molecularly imprinted polymer (MIP‐CSP) without coating on the silica gel (α = 1.96) during the chiral separation of BINOL enantiomers by high‐performance liquid chromatography. The influence of the pretreatment temperature and the content of the template molecule ((R )‐BINOL) of the SMIP‐CSP, and the mobile phase composition on the separation of the racemic BINOL were systematically investigated.     

Preparation of tri(ethylene glycol) grafted core‐shell type polymer support for solid‐phase peptide synthesis

A core‐shell type polymer support for solid‐phase peptide synthesis has been developed for high coupling efficiency of peptides and versatile applications such as on‐bead bioassays. Although various kinds of polymer supports have been developed, they have their own drawbacks including poor accessibility of reagents and incompatibility in aqueous solution. In this paper, we prepared hydrophilic tri(ethylene glycol) (TEG) grafted core‐shell type polymer supports (TEG SURE) for efficient solid‐phase peptide synthesis and on‐bead bioassays. TEG SURE was prepared by grafting TEG derivative on the surface of AM PS resin via biphasic diffusion control method and subsequent acetylation of amine groups which are located at the core region of AM PS resin. The performance of TEG SURE was evaluated by synthesizing several peptides. Three points can be highlighted: (1) easy control of loading level of TEG, (2) improved efficiency of peptide synthesis compared with the conventional resins, and (3) applicability of on‐bead bioassays.     

Applications of magnetic surface imprinted materials for solid phase extraction of levofloxacin in serum samples

In this work, molecularly imprinted magnetic carbon nanotubes (MCNTs@MIPs) was prepared with surface imprinting technique for extraction of levofloxacin in serum samples. The preparation of molecularly imprinted polymers (MIPs) used levofloxacin as template, methacrylic acid as functional monomer, and ethylene glycol dimethacrylate as cross‐linker, and the magnetic carbon nanotubes (MCNTs) was synthesized by solvothermal method. The prepared polymers not only can be separated and collected easily by an external magnetic, but also exhibited high specific surface area and high selectivity to template molecules. Kinetic adsorption and static adsorption capacity investigations indicated that the synthesized MCNTs@MIPs had excellent recognition towards levofloxacin. Furthermore, magnetic solid phase extraction (MSPE) using the prepared MCNTs@MIPs as sorbent was then investigated, and an efficient sample cleanup was obtained with recoveries ranged from 78.7 ± 4.8 % to 83.4 ± 4.1%. In addition, several parameters, including the pH of samples, the amount of MCNTs@MIPs, the adsorption and desorption times, and the eluent, were investigated to obtain optimal extraction efficiency. Under the optimal extraction conditions, the stability of the polymer was also evaluated, and the average recovery reduced less than 7.6% after 5 cycles. MCNTs@MIPs successfully applied in the preconcentration and determination of levofloxacin in serum sample suggested that the MSPE method based on the novel polymers could be a promising alternative for selective and efficient extraction of trace amounts of pharmaceutical substances in bio‐matrix samples. Copyright © 2015 John Wiley & Sons, Ltd.     

A convenient microwave‐enhanced solid‐phase synthesis of short chain N‐methyl‐rich peptides

Structural modification of the peptide backbone via N‐methylation is a powerful tool to modulate the pharmacokinetic profile and biological activity of peptides. Here we describe a rapid and highly efficient microwave(MW)‐assisted Fmoc/tBu solid‐phase method to prepare short chain N‐methyl‐rich peptides, using Rink amide p‐methylbenzhydrylamine (MBHA) resin as solid‐phase support. This method produces peptides in high yield and purity, and reduces the time required for Fmoc‐N‐methyl amino acid coupling. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Determination of methanol in biodiesel by headspace solid phase microextraction

A new direct gas chromatography procedure (headspace solid phase microextraction) was developed for the quantitative determination of methanol in biodiesel. The analysis was performed by exposing a carboxen–polydimethylsiloxane SPME fiber assembly to the headspace of the biodiesel sample. The gas chromatography used a HP-5 capillary column and flame ionization detection. A polynomial relationship was observed between the methanol concentration and its peak area. This method showed good reproducibility (average relative standard deviation 7.06%) and recovery (average recovery 100.2%).     

p‐Methoxyphenol: A potent and effective scavenger for solid‐phase peptide synthesis

During the final step of t‐Boc/Bzl, solid‐phase peptide synthesis (SPPS)‐protecting groups from amino acids (aa) side chains must be removed from the target peptides during cleavage from the solid support . These reaction steps involve hydrolysis with hydrogen fluoride (HF) in the presence of a nucleophile (scavenger), whose function is to trap the carbocations produced during S_N1‐type reactions. Five peptide sequences were synthesised for evaluating p‐methoxyphenol effectiveness as a potent scavenger. After the synthesis, the resin–peptide was then separated into two equal parts to be cleaved using two scavengers: conventional reactive p‐cresol (reported in the literature as an effective acyl ion eliminator) and p‐methoxyphenol (hypothesised as fulfilling the same functions as the routinely used scavenger). Detailed analysis of the electrostatic potential map (EPM) revealed similarities between these two nucleophiles, regarding net atomic charge, electron density distribution, and similar pKa values. Good scavenger efficacy was observed by chromatography and mass spectrometry results for the synthesised molecules, which revealed that p‐methoxyphenol can be used as a potent scavenger during SPPS by t‐Boc/Bzl strategy, as similar results were obtained using the conventional scavenger.     

Use of solid phase microextraction (SPME) for profiling fungal volatile metabolites

AIMS: The influence of isolation methods: solid phase microextraction (SPME) with different fibres and simultaneous distillation extraction (SDE) on the profile of isolated fungal volatile metabolites was investigated. METHODS AND RESULTS: Four SPME fibre types: Polydimethylsiloxane, Polyacrylate, Carboxen/PDMS and Carboxen/Divinylbenzene/PDMS were evaluated in terms of their efficiency in extracting volatile metabolites emitted by Penicillium roqueforti grown on wheat kernel medium. All fibres showed varied efficiency and selectivity in extracting volatile compounds. Sesquiterpene hydrocarbons were the predominant fraction of volatile compounds isolated by all fibres, and ranged from 55.4 to 93.7% of all volatiles depending on the type of fibre used. Alcohols and ketones ranged from 2.7 to 20.5%, esters from 1.2 to 12.8%, and monoterpene hydrocarbons from 1.2 to 5.4%. Profile of volatile compounds obtained by SDE differed from SPME and the oxygenated sesquiterpenes formed the predominant fraction of volatiles isolated using SDE. SIGNIFICANCE AND IMPACT OF THE STUDY: The data in this study show that analysed profile of volatile compounds emitted by fungi is highly dependent on the extraction method.     

Advances in Fmoc solid‐phase peptide synthesis

Today, Fmoc SPPS is the method of choice for peptide synthesis. Very‐high‐quality Fmoc building blocks are available at low cost because of the economies of scale arising from current multiton production of therapeutic peptides by Fmoc SPPS. Many modified derivatives are commercially available as Fmoc building blocks, making synthetic access to a broad range of peptide derivatives straightforward. The number of synthetic peptides entering clinical trials has grown continuously over the last decade, and recent advances in the Fmoc SPPS technology are a response to the growing demand from medicinal chemistry and pharmacology. Improvements are being continually reported for peptide quality, synthesis time and novel synthetic targets. Topical peptide research has contributed to a continuous improvement and expansion of Fmoc SPPS applications. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

General method for selective labelling of double‐chain cysteine‐rich peptides with a lanthanide chelate via solid‐phase synthesis

The use of lanthanides in preference to radioisotopes as probes for various biological assays has gained enormous popularity. The introduction of lanthanide chelates to peptides/proteins can be carried out either in solution using a commercially available labelling kit or by solid‐phase peptide synthesis using an appropriate lanthanide chelate. Herein, a detailed protocol for the latter is provided for the labelling of peptides or small proteins with diethylenetriamine‐N, N, N″, N″‐tetra‐tert‐butyl acetate‐N′‐acetic acid (DTPA) chelate or other similar chelates on a solid support using a chimeric insulin‐like peptide composed of human insulin‐like peptide 5 (INSL5) A‐chain and relaxin‐3 B‐chain as a model peptide. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

A novel solid‐phase extraction–spectrofluorimetric method for the direct determination of atenolol in human urine

A novel, simple, sensitive and selective solid‐phase extraction (SPE)–spectrofluorimetric method has been developed for the determination of atenolol (ATE) in human urine. Because an extraction procedure is required to isolate ATE or eliminate the interfering molecules present in complex human urine for the direct spectrofluorimetric determination, a pH‐sensitive poly(acrylic acid‐ethylene glycol dimethacrylate) [poly(AA‐EGDMA)] hydrogel was developed and used as a SPE adsorbent. Some factors affecting the ATE extraction efficiency, such as washing solvent type and volume, and the volume of elution solvent were optimized. Eluates from SPE cartridges were analyzed using a spectrofluorimeter (λ_ex = 277 nm and λ_em = 300 nm). The calibration graph was linear over the concentration range 0.15–4.0 µg/mL. Limit of detection (LOD) and limit of quantification (LOQ) values were found to be 0.03 and 0.10 µg/mL, respectively. Relatively high intraday [2.06%, mean relative standard deviation (RSD)] and interday (2.6%, mean RSD) precisions were achieved. High mean recovery (95.4%) and low RSD values (3.8%) were obtained for spiked ATE in human urine. The spectrofluorimetric method presented here can be easily applied to assay trace amounts of ATE in pharmaceuticals and biological samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Semi‐automated high throughput combinatorial solid‐phase organic synthesis

A semi‐automated technique for massive parallel solid‐phase organic synthesis based on a “split only” strategy is described. Two different types of purpose‐oriented reaction vessels are used. The initial steps are performed in domino blocks, and the resin‐bound intermediates then split into wells of a micro plate for the last combinatorial step. The domino block is a reaction block for manual and semi‐automatic parallel solid‐phase organic synthesis that simplifies liquid exchange and integrates common synthetic steps. The synthesis in micro plates does not use any filter for separation of resin beads from the supernatant liquid, and allows high throughput parallel synthesis on solid phase to be performed. This technique, documented on examples of diverse disubstituted benzenes, includes the use of gaseous cleavage in the last synthetic step and allows the synthesis of thousands of compounds per day in mg quantities. © 1999 John Wiley & Sons, Inc. Biotechnol Bioeng (Comb Chem) 61:135–141, 1998/1999.     

Synthesis and purification of self‐assembling peptide‐oligonucleotide conjugates by solid‐phase peptide fragment condensation

Peptide‐oligonucleotide conjugates (POCs) are interesting molecules as they covalently combine 2 of the most important biomacromolecules. Sometimes, the synthesis of POCs involves unexpected difficulties; however, POCs with self‐assembling propensity are even harder to synthesize and purify. Here, we show that solid‐phase peptide fragment condensation combined with thiol‐maleimide or copper‐catalyzed azide‐alkyne cycloaddition click chemistries is useful for the syntheses of self‐assembling POCs. We describe guidelines for the selection of reactive functional groups and their placement during the conjugation reaction and consider the cost‐effectiveness of the reaction. Purification is another important challenge during the preparation of POCs. Our results show that polyacrylamide gel electrophoresis under denaturing conditions is most suitable to recover a high yield of self‐assembling POCs. This report provides the first comprehensive study of the preparation of self‐assembling POCs, which will lay a foundation for the development of elegant and sophisticated molecular assemblies.     

Facile preparation of the N‐acetyl‐glucosaminylated asparagine derivative with TFA‐sensitive protecting groups useful for solid‐phase glycopeptide synthesis

In this study, a novel N‐acetyl‐glucosaminylated asparagine derivative was developed. This derivative carried TFA‐sensitive protecting groups and was derived from commercially available compounds only in three steps. It was applicable to the ordinary 9‐fluorenylmethoxycarbonyl (Fmoc)‐based solid‐phase peptide synthesis (SPPS) method, and the protecting groups on the carbohydrate moiety could be removed by a single step of TFA cocktail treatment generally used for the final deprotection step in Fmoc‐SPPS. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Microdevice‐based solid‐phase polymerase chain reaction for rapid detection of pathogenic microorganisms

We demonstrate the integration of DNA amplification and detection functionalities developed on a lab‐on‐a‐chip microdevice utilizing solid‐phase polymerase chain reaction (SP‐PCR) for point‐of‐need (PON) DNA analyses. First, the polycarbonate microdevice was fabricated by thermal bonding to contain microchambers as reservoirs for performing SP‐PCR. Next, the microchambers were subsequently modified with polyethyleneimine and glutaraldehyde for immobilizing amine‐modified forward primers. During SP‐PCR, the immobilized forward primers and freely diffusing fluorescence‐labeled reverse primers cooperated to generate target amplicons, which remained covalently attached to the microchambers for the fluorescence detection. The SP‐PCR microdevice was used for the direct identifications of two widely detected foodborne pathogens, namely Salmonella spp. and Staphylococcus aureus, and an alga causing harmful algal blooms annually in South Korea, Cochlodinium polykrikoides. The SP‐PCR microdevice would be versatilely applied in PON testing as a universal platform for the fast identification of foodborne pathogens and environmentally threatening biogenic targets.