A useful epitope tag derived from maltose binding protein

Maltose binding protein (MBP) is used in recombinant protein expression as an affinity and solubility tag. The monoclonal antibody B48 binds MBP tightly and has no cross‐reactivity to other proteins in an Escherichia coli lysate. This high level of specificity suggested that MBP contains an epitope that could prove useful as a purification and visualization tag for proteins expressed in E. coli. To discover the MBP epitope, a co‐crystal structure was determined for MBP bound to its antibody and four amino acids of MBP were identified as critical for the binding interaction. Fusions of various fragments of MBP to the glutathione S‐transferase protein were engineered in order to identify the smallest fragment still recognized by the α‐MBP antibody. Stabilization of the epitope via mutational engineering resulted in a minimized 14 amino‐acid tag.     

一种蛋白质B细胞表位展示系统的构建及验证

目的:建立一种能够有效展示蛋白质B细胞表位的载体系统,以用于表位特异性抗体的制备和表位疫苗的设计。方法:选用抗体的可变区作为蛋白质B细胞表位展示的骨架蛋白,B细胞表位的展示部位为CDR3区。全基因合成骨架蛋白基因,通过重叠PCR将B细胞表位编码序列插入到骨架蛋白基因中,原核表达目的蛋白,利用Sephacryl S-100层析柱进行蛋白纯化,用纯化的蛋白按常规方法免疫小鼠,采用ELISA法检测免疫血清的滴度及特异性,通过Western blot和间接免疫荧光技术进一步验证免疫血清对目的蛋白的识别。结果:成功构建了3种表位展示蛋白,均表现出了很好的抗原性,表位展示蛋白免疫血清具有较好的特异性,能够特异识别所展示的B细胞表位。结论:抗体可变区作为骨架蛋白能够很好地展示B细胞表位,免疫小鼠后获得的免疫血清表现出了较好的特异性。     

Effects of protein engineering and rational mutagenesis on crystal lattice of single chain antibody fragments

Protein crystallization is dependent upon, and sensitive to, the intermolecular contacts that assist in ordering proteins into a three‐dimensional lattice. Here we used protein engineering and mutagenesis to affect the crystallization of single chain antibody fragments (scFvs) that recognize the EE epitope (EYMPME) with high affinity. These hypercrystallizable scFvs are under development to assist difficult proteins, such as membrane proteins, in forming crystals, by acting as crystallization chaperones. Guided by analyses of intermolecular crystal lattice contacts, two second‐generation anti‐EE scFvs were produced, which bind to proteins with installed EE tags. Surprisingly, although noncomplementarity determining region (CDR) lattice residues from the parent scFv framework remained unchanged through the processes of protein engineering and rational design, crystal lattices of the derivative scFvs differ. Comparison of energy calculations and the experimentally‐determined lattice interactions for this basis set provides insight into the complexity of the forces driving crystal lattice choice and demonstrates the availability of multiple well‐ordered surface features in our scFvs capable of forming versatile crystal contacts. Proteins 2014; 82:1884–1895. © 2014 Wiley Periodicals, Inc.     

Application of the NZ‐1 Fab as a crystallization chaperone for PA tag‐inserted target proteins

An antibody fragment that recognizes the tertiary structure of a target protein with high affinity can be utilized as a crystallization chaperone. Difficulties in establishing conformation‐specific antibodies, however, limit the applicability of antibody fragment‐assisted crystallization. Here, we attempted to establish an alternative method to promote the crystallization of target proteins using an already established anti‐tag antibody. The monoclonal antibody NZ‐1 recognizes the PA tag with an extremely high affinity. It was also established that the PA tag is accommodated in the antigen‐binding pocket in a bent conformation, compatible with an insertion into loop regions on the target. We, therefore, explored the application of NZ‐1 Fab as a crystallization chaperone that complexes with a target protein displaying a PA tag. Specifically, we inserted the PA tag into the β‐hairpins of the PDZ tandem fragment of a bacterial Site‐2 protease. We crystallized the PA‐inserted PDZ tandem mutants with the NZ‐1 Fab and solved the co‐crystal structure to analyze their interaction modes. Although the initial insertion designs produced only moderate‐resolution structures, eliminating the solvent‐accessible space between the NZ‐1 Fab and target PDZ tandem improved the diffraction qualities remarkably. Our results demonstrate that the NZ‐1‐PA system efficiently promotes crystallization of the target protein. The present work also suggests that β‐hairpins are suitable sites for the PA insertion because the PA tag contains a Pro‐Gly sequence with a propensity for a β‐turn conformation.     

Optimized E. coli expression strain LOBSTR eliminates common contaminants from His‐tag purification

His‐tag affinity purification is one of the most commonly used methods to purify recombinant proteins expressed in E. coli. One drawback of using the His‐tag is the co‐purification of contaminating histidine‐rich E. coli proteins. We engineered a new E. coli expression strain, LOBSTR (lo w b ackground str ain), which eliminates the most abundant contaminants. LOBSTR is derived from the E. coli BL21(DE3) strain and carries genomically modified copies of arnA and slyD, whose protein products exhibit reduced affinities to Ni and Co resins, resulting in a much higher purity of the target protein. The use of LOBSTR enables the pursuit of challenging low‐expressing protein targets by reducing background contamination with no additional purification steps, materials, or costs, and thus pushes the limits of standard His‐tag purifications. Proteins 2013; 81:1857–1861. © 2013 Wiley Periodicals, Inc.     

Integrated tandem affinity protein purification using the polyhistidine plus extra 4 amino acids (HiP4) tag system

Peptide tag systems are a robust biophysical and biochemical method that is widely used for protein detection and purification. Here, we developed a novel tag system termed “HiP4” (histidine plus four amino acids) whose epitope sequence comprises only seven amino acids (HHHDYDI) that partially overlap with the conventional 6x histidine tag (6xHis-tag). We produced a monoclonal antibody against the HiP4 tag that can be used in multiple immunoassays with high specificity and affinity. Using this system, we developed a tandem affinity purification (TAP) and mass spectrometry (TAP-MS) system for comprehensive protein interactome analysis. The integrated use of nickel bead purification followed by HiP4 tag immunoprecipitation made it possible to reduce nonspecific binding and improve selectivity, leading to the recovery of previously unrecognized proteins that interact with hepatitis B virus X (HBx) protein or TAR DNA-binding protein 43 (TARDBP or TDP-43). Our results indicate that this system may be viable as a simple and powerful tool for TAP-MS that can achieve low background and high selectivity in comprehensive protein–protein interaction analyses.     

Epitope characterization of an anti‐PD‐L1 antibody using orthogonal approaches

The binding of programmed death ligand 1 protein (PD‐L1) to its receptor programmed death protein 1 (PD‐1) mediates immunoevasion in cancer and chronic viral infections, presenting an important target for therapeutic intervention. Several monoclonal antibodies targeting the PD‐L1/PD‐1 signaling axis are undergoing clinical trials; however, the epitopes of these antibodies have not been described. We have combined orthogonal approaches to localize and characterize the epitope of a monoclonal antibody directed against PD‐L1 at good resolution and with high confidence. Limited proteolysis and mass spectrometry were applied to reveal that the epitope resides in the first immunoglobulin domain of PD‐L1. Hydrogen–deuterium exchange mass spectrometry (HDX‐MS) was used to identify a conformational epitope comprised of discontinuous strands that fold to form a beta sheet in the native structure. This beta sheet presents an epitope surface that significantly overlaps with the PD‐1 binding interface, consistent with a desired PD‐1 competitive mechanism of action for the antibody. Surface plasmon resonance screening of mutant PD‐L1 variants confirmed that the region identified by HDX‐MS is critical for the antibody interaction and further defined specific residues contributing to the binding energy. Taken together, the results are consistent with the observed inhibitory activity of the antibody on PD‐L1‐mediated immune evasion. This is the first report of an epitope for any antibody targeting PD‐L1 and demonstrates the power of combining orthogonal epitope mapping techniques. Copyright © 2015 John Wiley & Sons, Ltd.     

Multiple tandem epitope tagging for enhanced detection of protein expressed in mammalian cells

Epitope tagging is a valuable tool for quick detection, isolation, and analysis of protein-protein interaction, without prior knowledge of the target protein. The FLAG epitope tag, one of the most widely used tags, is an eight amino acid peptide that can be detected by anti-FLAG monoclonal antibody. In the present study, we have examined the detection sensitivity of a protein fused to three tandem FLAG epitopes by Western blot analysis, immunoprecipitation, and immunohistochemical analysis using anti-FLAG® M2 antibody. We find that the triple FLAG epitope significantly enhances the sensitivity of detection of fusion protein expressed in mammalian cells.     

Epitope motif of an anti‐nitrotyrosine antibody specific for tyrosine‐nitrated peptides revealed by a combination of affinity approaches and mass spectrometry

Nitration of tyrosine residues has been shown to be an important oxidative modification in proteins and has been suggested to play a role in several diseases such as atherosclerosis, asthma, lung and neurodegenerative diseases. Detection of nitrated proteins has been mainly based on the use of nitrotyrosine‐specific antibodies. In contrast, only a small number of nitration sites in proteins have been unequivocally identified by MS. We have used a monoclonal 3‐NT‐specific antibody, and have synthesized a series of tyrosine‐nitrated peptides of prostacyclin synthase (PCS) in which a single specific nitration site at Tyr‐430 had been previously identified upon reaction with peroxynitrite 17 . The determination of antibody‐binding affinity and specificity of PCS peptides nitrated at different tyrosine residues (Tyr‐430, Tyr‐421, Tyr‐83) and sequence mutations around the nitration sites provided the identification of an epitope motif containing positively charged amino acids (Lys and/or Arg) N‐terminal to the nitration site. The highest affinity to the anti‐3NT‐antibody was found for the PCS peptide comprising the Tyr‐430 nitration site with a K_D of 60 nM determined for the peptide, PCS(424‐436‐Tyr‐430NO₂); in contrast, PCS peptides nitrated at Tyr‐421 and Tyr‐83 had substantially lower affinity. ELISA, SAW bioaffinity, proteolytic digestion of antibody‐bound peptides and affinity‐MS analysis revealed highest affinity to the antibody for tyrosine‐nitrated peptides that contained positively charged amino acids in the N‐terminal sequence to the nitration site. Remarkably, similar N‐terminal sequences of tyrosine‐nitration sites have been recently identified in nitrated physiological proteins, such as eosinophil peroxidase and eosinophil‐cationic protein. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Epitope specificity of two anti‐morphine monoclonal antibodies: In vitro and in silico studies

Monoclonal antibodies (mAbs) against morphine are important in the development of immunotherapeutic and diagnostic methods for the treatment and prevention of drug addiction. By the surface plasmon resonance (SPR) and enzyme immunoassay techniques, we characterized two previously obtained mAbs 3K11 and 6G1 and showed their ability to recognize free morphine and morphine‐containing antigens in different ways because of the epitope specificity thereof. Using the defined amino acid sequences, we obtained three‐dimensional models of the variable regions of Fab fragments of these antibodies and compared them with the known sequence and spatial structure of the anti‐morphine antibody 9B1. Docking simulations are performed to obtain models of the antibodies complexes with morphine. Differences in the models of 3K11 and 6G1 complexes with morphine correlate with their experimentally detected epitope specificity. The results, in particular, can be used for the structure‐based design of the corresponding humanized antibodies. According to our modeling and docking results, the very different modes of morphine binding to mAbs 3K11 and 6G1 are qualitatively similar to those previously reported for cocaine and two anti‐cocaine antibodies. Thus, the obtained structural information brings more insight into the hapten recognition diversity.     

Engineering a Novel Multifunctional Green Fluorescent Protein Tag for a Wide Variety of Protein Research

Background

Genetically encoded tag is a powerful tool for protein research. Various kinds of tags have been developed: fluorescent proteins for live-cell imaging, affinity tags for protein isolation, and epitope tags for immunological detections. One of the major problems concerning the protein tagging is that many constructs with different tags have to be made for different applications, which is time- and resource-consuming.

Methodology/Principal Findings

Here we report a novel multifunctional green fluorescent protein (mfGFP) tag which was engineered by inserting multiple peptide tags, i.e., octa-histidine (8×His), streptavidin-binding peptide (SBP), and c-Myc tag, in tandem into a loop of GFP. When fused to various proteins, mfGFP monitored their localization in living cells. Streptavidin agarose column chromatography with the SBP tag successfully isolated the protein complexes in a native form with a high purity. Tandem affinity purification (TAP) with 8×His and SBP tags in mfGFP further purified the protein complexes. mfGFP was clearly detected by c-Myc-specific antibody both in immunofluorescence and immuno-electron microscopy (EM). These findings indicate that mfGFP works well as a multifunctional tag in mammalian cells. The tag insertion was also successful in other fluorescent protein, mCherry.

Conclusions and Significance

The multifunctional fluorescent protein tag is a useful tool for a wide variety of protein research, and may have the advantage over other multiple tag systems in its higher expandability and compatibility with existing and future tag technologies.     

Evidence for conformationally different states of interleukin‐10: binding of a neutralizing antibody enhances accessibility of a hidden epitope

We present the mapping of two anti‐human interleukin‐10 (hIL‐10) antibodies (CB/RS/2 and CB/RS/11) which have been described as binding their antigen cooperatively. The epitopes were identified using hIL‐10‐derived overlapping peptide scans prepared by spot synthesis. To identify residues essential for binding within the two epitopes, each position was replaced by all other L ‐amino acids. The epitope‐derived peptides were further characterized with respect to antibody affinity and their inhibition of the antibody–hIL‐10 interaction. One antibody (CB/RS/11) binds to residues which are completely buried in the X‐ray structure of IL‐10. Accessibility of this hidden epitope is enhanced upon binding of the antibody CB/RS/2, which recognizes a discontinuous epitope located nearby. The recognition of the hidden CB/RS/11 epitope, as well as the cooperative binding behaviour of the two antibodies, provides evidence that IL‐10 can adopt a conformational state other than that observed in the crystal structure. Copyright © 1999 John Wiley & Sons, Ltd.     

Process intensification for the removal of poly‐histidine fusion tags from recombinant proteins by an exopeptidase

This study describes the use of a hexa‐histidine tagged exopeptidase for the cleavage of hexa‐histidine tags from recombinant maltose binding protein (MBP) when both tagged species are bound to an immobilized metal affinity chromatography (IMAC) matrix. On‐column exopeptidase cleavage only occurred when the cleavage buffer contained an imidazole concentration of 50 mM or higher. Two strategies were tested for the on‐column tag cleavage by dipeptidylaminopeptidase (DAPase): (i) a post‐load wash was performed after sample loading using cleavage buffers containing varying imidazole concentrations and (ii) a post‐load wash was omitted following sample loading. In the presence of 50 mM imidazole, 46% of the originally adsorbed hexa‐histidine tagged MBP was cleaved, released from the column, and recovered in a sample containing 100% native (i.e., completely detagged) MBP. This strategy renders the subsequent purification steps unnecessary as any tagged contaminants remained bound to the column. At higher imidazole concentrations, binding of both hexa‐histidine tagged MBP and DAPase to the column was minimized, leading to characteristics of cleavage more closely resembling that of a batch cleavage. An on‐column cleavage yield of 93% was achieved in the presence of 300 mM imidazole, albeit with contamination of the detagged protein with tag fragments and partially tagged MBP. The success of the on‐column exopeptidase cleavage makes the integration of the poly‐histidine tag removal protocol within the IMAC protein capture step possible. The many benefits of using commercially available exopeptidases, such as DAPase, for poly‐histidine tag removal can now be combined with the on‐column tag cleavage operation. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Recombinant chymosin used for exact and complete removal of a prochymosin derived fusion tag releasing intact native target protein

Fusion tags add desirable properties to recombinant proteins, but they are not necessarily acceptable in the final products. Ideally, fusion tags should be removed releasing the intact native protein with no trace of the tag. Unique endoproteinases with the ability to cleave outside their own recognition sequence can potentially cleave at the boundary of any native protein. Chymosin was recently shown to cleave a pro‐chymosin derived fusion tag releasing native target proteins. In our hands, however, not all proteins are chymosin‐resistant under the acidic cleavage conditions (pH 4.5) used in this system. Here, we have modified the pro‐chymosin fusion tag and demonstrated that chymosin can remove this tag at more neutral pH (pH 6.2); conditions, that are less prone to compromise the integrity of target proteins. Chymosin was successfully used to produce intact native target protein both at the level of small and large‐scale preparations. Using short peptide substrates, we further examined the influence of P1′ amino acid (the N‐terminus of the native target protein) and found that chymosin accepts many different, although not all, amino acids. We conclude that chymosin has several appealing characteristics for the exact removal of fusion tags. It is readily available in highly purified recombinant versions approved by the FDA for preparation of food for human consumption. We suggest that one should consider extending the use of chymosin to the preparation of pharmaceutical proteins.     

Identification of B‐cell epitopes of Borrelia burgdorferi outer surface protein C by screening a phage‐displayed gene fragment library

Outer surface protein C (OspC) of Borrelia stimulates remarkable immune responses during early infection and is therefore currently considered a leading diagnostic and vaccine candidate. The sensitivity and specificity of serological tests based on whole protein OspC for diagnosis of Lyme disease are still unsatisfactory. Minimal B‐cell epitopes are key in the development of reliable immunodiagnostic tools. Using OspC fragments displayed on phage particles (phage library) and anti‐OspC antibodies isolated from sera of naturally infected patients, six OspC epitopes capable of distinguishing between LD patient and healthy control sera were identified. Three of these epitopes are located at the N‐terminus (OspC E1 aa19–27, OspC E2 aa38–53, OspC E3 aa62–66) and three at the C‐terminal end (OspC E4 aa155–163, OspC E5 aa184–190 and OspC E6 aa201–207). OspC E1, E4 and E6 were highly conserved among LD related Borreliae. To our knowledge, epitopes OspC E2, E3 and E5 were identified for the first time in this study. Minimal B‐cell epitopes may provide fundamental data for the development of multi‐epitope‐based diagnostic tools for Lyme disease.     

Computational design of protein antigens that interact with the CDR H3 loop of HIV broadly neutralizing antibody 2F5

Rational design of proteins with novel binding specificities and increased affinity is one of the major goals of computational protein design. Epitope‐scaffolds are a new class of antigens engineered by transplanting viral epitopes of predefined structure to protein scaffolds, or by building protein scaffolds around such epitopes. Epitope‐scaffolds are of interest as vaccine components to attempt to elicit neutralizing antibodies targeting the specified epitope. In this study we developed a new computational protocol, MultiGraft Interface, that transplants epitopes but also designs additional scaffold features outside the epitope to enhance antibody‐binding specificity and potentially influence the specificity of elicited antibodies. We employed MultiGraft Interface to engineer novel epitope‐scaffolds that display the known epitope of human immunodeficiency virus 1 (HIV‐1) neutralizing antibody 2F5 and that also interact with the functionally important CDR H3 antibody loop. MultiGraft Interface generated an epitope‐scaffold that bound 2F5 with subnanomolar affinity (K_D = 400 pM) and that interacted with the antibody CDR H3 loop through computationally designed contacts. Substantial structural modifications were necessary to engineer this antigen, with the 2F5 epitope replacing a helix in the native scaffold and with 15% of the native scaffold sequence being modified in the design stage. This epitope‐scaffold represents a successful example of rational protein backbone engineering and protein–protein interface design and could prove useful in the field of HIV vaccine design. MultiGraft Interface can be generally applied to engineer novel binding partners with altered specificity and optimized affinity. Proteins 2014; 82:2770–2782. © 2014 Wiley Periodicals, Inc.     

A novel method of affinity-purifying proteins using a bis-arsenical fluorescein

Genetically-encoded affinity tags constitute an important strategy for purifying proteins. Here, we have designed a novel affinity matrix based on the his-arsenical fluorescein dye FlAsH, which specifically recognizes short alpha-helical peptides containing the sequence CCXXCC (Griffin BA, Adams SR, Tsien RY, 1998, Science 281:269-272). We find that kinesin tagged with this cysteine-containing helix binds specifically to FlAsH resin and can be eluted in a fully active form. This affinity tag has several advantages over polyhistidine, the only small affinity tag in common use. The protein obtained with this single chromatographic step from crude Escherichia coli lysates is purer than that obtained with nickel affinity chromatography of 6xHis tagged kinesin. Moreover, unlike nickel affinity chromatography, which requires high concentrations of imidazole or pH changes for elution, protein bound to the FlAsH column can be completely eluted by dithiothreitol. Because of these mild elution conditions, FlAsH affinity chromatography is ideal for recovering fully active protein and for the purification of intact protein complexes.     

Actin surface structure revealed by antibody imprints: evaluation of phage-display analysis of anti-actin antibodies

Phage-display peptide library analysis of an anti-F actin polyclonal antibody identified 12 amino acid residues of actin that appear, in its X-ray crystal structure, to be grouped together in a surface accessible conformational epitope. Phage epitope mapping was carried out by isolating immune complexes containing members of the J404 nonapeptide phage-display library formed in diluted antiserum and isolated on a protein A affinity matrix. Immunoreactive clones were grown as plaques, replica plated onto nitrocellulose, and labeled with anti-actin immune serum. One hundred and forty-four positively staining clones identified in this way were sequenced. Of these, 54 displayed peptides with sequence similarities. When the most abundantly selected sequence, KQTWQQLWD, was produced as a synthetic peptide and derivatized to ovalbumin, the complex was strongly recognized by the antiserum on Western blots and inhibited the binding of the antibody to immobilized F-actin by 60%. A scrambled version of this sequence WQDK WLQTQ, when coupled to ovalbumin, was not recognized by the antiserum and minimally inhibited binding of antiserum to immobilized F-actin by 10%. KQTWQQLWD contained four residues that corresponded, in frame, to a highly conserved six residue region of the chicken beta-actin sequence 351TFQQMW356 (identical residues are shown in bold). Examination of the rabbit skeletal muscle X-ray crystal structure suggested that within a 15 A radius of W356, nine additional residues were arranged on the actin surface in such a way that they could be mimicked by several of the selected phage sequences with root-mean-square deviation fits of 2.1-2.5 A. We conclude that phage-display analysis can provide information about the relative location of amino acids on the surfaces of proteins using antibody imprints of the protein surface structure.     

A novel S3S‐TAP‐tag for the isolation of T‐cell interaction partners of adhesion and degranulation promoting adaptor protein

The identification of modular units of cellular function is a major goal for proteomic research. Protein complexes represent important building blocks defining functionality and deciphering their composition remains a major challenge. Here, we have designed a new tandem affinity purification (TAP) tag (termed S3S‐tag) for the isolation of protein complexes. Specifically, the immune cell protein ADAP that regulates integrin adhesion was fused either C‐ or N‐terminally to the S3S‐tag. After retroviral transduction of a vector containing S3S‐tagged ADAP and internal ribosomal entry site encoded enhanced green fluorescent protein (eGFP), Jurkat T cells were sorted according to eGFP expression and further selected for expression of TAP‐tagged protein close to endogenous levels. The combination of a cleavable S‐tag and a Strep‐tag II allowed for the isolation of ADAP and associated proteins. Subsequently, stable isotope labeling with amino acids in cell culture‐based mass spectrometric analysis was performed to identify potentially specific interaction partners. Co‐purification of the known interaction partner Src kinase‐associated phosphoprotein of 55 kDa indicates the validity of our approach, while the identification of the ENA/VASP family member EVL, the guanine nucleotide exchange factor GEF‐H1 and the adaptor protein DOCK2 corroborates a link between ADAP‐mediated integrin regulation and the cytoskeleton.     

Improved method to raise polyclonal antibody using enhanced green fluorescent protein transgenic mice

Recombinant fusion protein is widely used as an antigen to raise antibodies against the epitope of a target protein. However, the concomitant anticarrier antibody in resulting antiserum reduces the production of the desired antibody and brings about unwanted non-specific immune reactions. It is proposed that the carrier protein transgeulc animal could be used to solve this problem. To validate this hypothesis, enhanced green fluorescent protein （EGFP） transgenic mice were produced. By immunizing the mice with fusion protein His6HAtag-EGFP, we showed that the antiserum from the transgenic mice had higher titer antibody against His6HA tag and lower titer antibody against EGFP compared with that from wild-type mice. Therefore, this report describes an improved method to raise high titer antipeptide polyclonal antibody using EGFP transgenic mice that could have application potential in antibody preparation.