CdSe and CdSe/CdS core–shell QDs: New approach for synthesis,investigating optical properties and application in pollutant degradation

In this work, CdSe quantum dots (QDs) were synthesized by a simple and rapid microwave activated approach using CdSO₄, Na₂SeO₃ as precursors and thioglycolic acid (TGA) as capping agent molecule. A novel photochemical approach was introduced for the growth of CdS QDs and this approach was used to grow a CdS shell around CdSe cores for the formation of a CdSe/CdS core–shell structure. The core–shells were structurally verified using X‐ray diffraction, transmission electron microscopy and FTIR (Fourier‐transform infrared (FTIR)) spectroscopy. The optical properties of the samples were examined by means of UV–Vis and photoluminescence (PL) spectroscopy. It was found that CdS QDs emit a broad band white luminescence between 400 to 700 nm with a peak located at about 510 nm. CdSe QDs emission contained a broad band resulting from trap states between 450 to 800 nm with a peak located at 600 nm. After CdS shell growth, trap states emission was considerably quenched and a near band edge emission was appeared about 480 nm. Optical studies revealed that the core–shell QDs possess strong ultraviolet (UV) ? visible light photocatalytic activity. CdSe/CdS core–shell QDs, showed an enhancement in photodegradation of Methyl orange (MO) compared with CdSe QDs.     

Simple azo‐based salicylaldimine as colorimetric and fluorescent probe for detecting anions in semi‐aqueous medium

A series of novel, highly sensitive, and selective azo‐based anion sensors 1–3 have been designed and synthesized from the condensation reaction between 4‐amino azo benzene and three different aldehydes. The structure of the sensors 1–3 were confirmed by IR, HRMS, ¹H NMR, and ¹³C NMR spectroscopic methods. Colorimetric naked‐eye analysis revealed the anion detection by receptors 2 and 3 as color changes from yellow to pink and yellow to orange, respectively. Anion sensing ability of all receptors was further investigated by ¹H NMR titration, UV‐vis experiment, and fluorescence titration. UV‐vis measurements highly indicate the selective recognition of fluoride and acetate ions in 9:1 dimethyl sulfoxide–H₂O (v/v) for receptors 2 and 3. Binding constant value showed among all receptors, receptor 3 has strong affinity toward F^? and AcO^? in semi‐aqueous medium, which is due to the presence of chromogenic signaling unit in it. The F^? ion detection property of receptor 2 in organic medium was also extended in the real sample like toothpaste. Copyright © 2013 John Wiley & Sons, Ltd.     

Enhanced photoluminescence properties of electrospun Dy3+‐doped ZnO nanofibres for white lighting devices

Dy³⁺‐doped ZnO nanofibres with diameters from 200 to 500 nm were made using an electrospinning technique. The as‐fabricated amorphous nanofibres resulted in good crystalline continuous nanofibres through calcination. Dy³⁺‐doped ZnO nanofibres were characterized using scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), ultraviolet–visible (UV–vis) light spectroscopy, Fourier transform infrared spectroscopy (FTIR), and photoluminescence (PL). XRD showed the well defined peaks of ZnO. UV–vis spectra showed a good absorption band at 360 nm. FTIR spectra showed a Zn–O stretching vibration confirming the presence of ZnO. Photoluminescence spectra of Dy³⁺‐doped ZnO nanofibres showed an emission peak in the visible region that was free from any ZnO defect emission. Emissions at 480 nm and 575 nm in the Dy³⁺‐doped ZnO nanofibres were the characteristic peaks of dopant Dy³⁺ and implied efficient energy transfer from host to dopant. Luminescence intensity was found to be increased with increasing doping concentration and reduction in nanofibre diameter. Colour coordinates were calculated from photometric characterizations, which resembled the properties for warm white lighting devices.     

Synthesis of ZnSe and ZnSe:Cu quantum dots by a room temperature photochemical (UV‐assisted) approach using Na2SeO3 as Se source and investigating optical properties

In this study, ZnSe and ZnSe:Cu quantum dots (QDs) were synthesized using Na₂SeO₃ as the Se source by a rapid and room temperature photochemical (UV‐assisted) approach. Thioglycolic acid (TGA) was employed as the capping agent and UV illumination activated the chemical reactions. Synthesized QDs were successfully characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and UV–visible (UV–vis) spectroscopy, Fourier transform‐infrared (FT‐IR), and energy dispersive X‐ray spectroscopy (EDX). XRD analysis demonstrated the cubic zinc blend phase QDs. TEM images indicated that round‐shaped particles were formed, most of which had a diameter of about 4 nm. The band gap of the ZnSe QDs was higher than that for ZnSe in bulk. PL spectra indicated an emission with three peaks related to the excitonic, surface trap states and deep level (DL) states. The band gap and QD emission were tunable only by UV illumination time during synthesis. ZnSe:Cu showed green emission due to transition of electrons from the Conduction band (CB) or surface trap states to the ²T₂ acceptor levels of Cu²⁺. The emission was increased by increasing the Cu²⁺ ion concentration, such that the optimal value of PL intensity was obtained for the nominal mole ratio of Cu:Zn 1.5%.     

Effect of capping agent concentration on thermoluminescence and photoluminescence of copper‐doped zinc sulfide nanoparticles

Copper‐doped zinc sulfide (ZnS:Cu) nanoparticles with varying concentrations of capping agent were prepared using a chemical route technique. These particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy and X‐ray diffraction (XRD). Optical absorption studies showed that the absorption edge shifted towards the blue region as the concentration of the capping agent increased. Using effective mass approximation, calculation of the nanoparticle size indicated that effective band gap energy increases with decreasing particle size. The thermoluminescence (TL) properties of sodium hexameta phosphate (SHMP)‐passivated ZnS:Cu nanoparticles were investigated after UV irradiation at room temperature. The TL glow curve of capped ZnS:Cu showed variations in TL peak position and intensity with the change in capping agent concentration. The photoluminescence (PL) spectra of ZnS:Cu nanoparticles excited at 254 nm exhibited a broad green emission band peaking around 510 nm, which confirmed the characteristic feature of Zn²⁺ as well as Cu²⁺ ions as the luminescent centres in the lattice. The PL spectra of ZnS:Cu nanoparticles with increasing capping agent concentrations revealed that the emission becomes more intense and shifted towards shorter wavelengths as the sizes of the samples were reduced. Copyright © 2014 John Wiley & Sons, Ltd.     

New spectrofluorimetric method for determination of cephalosporins in pharmaceutical formulations

A simple, accurate, precise spectrofluorimetric method has been proposed for the determination of three cephalosporins, namely, cefixime (cefi), cephalexine (ceph), and cefotaxime sodium (cefo) in pharmaceutical formulations. This method is based on a reaction between cephalosporins with 8‐hydroxy‐1,3,6‐pyrenetrisulfonic acid trisodium salt (HPTS) in alkaline medium, at pH 12.0 for cefi and 13.0 for ceph and cefo to give highly fluorescent derivatives extracted with chloroform and subsequent measurements of the formed fluorescent products at 520, 500 and 510 nm after excitation at 480, 470 and 480 nm for cefi, ceph and cefo respectively. The optimum experimental conditions have been studied. Beer's law is obeyed over concentrations of 10–60 ng/mL, 5–35 ng/mL and 10–60 ng/mL for cefi, ceph and cefo, respectively. The detection limits were 4.20 ng/mL, 2.54 ng/mL and 4.09 ng/mL for cefi, ceph and cefo, respectively, with a linear regression correlation coefficient of 0.99783, 0.99705 and 0.9978 and recoveries in ranges 96.96–105.77, 96.13–102.55 and 95.45–105.39% for cefi, ceph and cefo, respectively. This method is simple and can be applied for the determination of cefi, ceph and cefo in pharmaceutical formulations in quality control laboratories. Copyright © 2012 John Wiley & Sons, Ltd.     

Variation in ultraviolet reflectance by carotenoid-bearing feathers of tanagers (Thraupini: Emberizinae: Passeriformes)

Avian visual sensitivity encompasses both the human visible range (400–700 nm) and also near‐ultraviolet (UV) wavelengths (320–400 nm) invisible to normal humans. I used reflectance spectrophotometry to assess variation in UV reflectance for yellow, orange and red plumage in 67 species of tanager (Passeriformes). Previous chemical studies, and my analysis of reflectance minima, suggest that carotenoids are the dominant pigments in yellow, orange and red tanager plumage. Spectra recorded over the range of wavelengths to which birds are sensitive (320–700 nm) were invariably bimodal, with both a plateau of high reflectance at longer (> 500 nm) wavelengths and a distinct secondary peak at UV (< 400 nm) wavelengths. Within this overall framework, variation in UV reflectance was expressed within well‐defined quantitative limits: (1) peak reflectance was always lower than the corresponding plateau of reflectance at longer visible wavelengths; (2) the intensity of peak reflectance declined steadily below 350 nm; (3) wavelengths of peak reflectance clustered between 350 and 370 nm. Significant correlations were detected between various measures of total reflectance in the UV and visible wavebands, but not between various measures of spectral location of UV and visible reflectance. I propose that the strong absorption band at short visible wavelengths (～ 380–550 nm) responsible for bimodal spectra of carotenoids in vitro is also responsible for bimodal reflectance by carotenoid‐based plumage colours. The construction of the UV and visible reflectance bands from different sides of this same absorbance band provides a mechanism for the observed covariation between UV and visible wavelengths. Lack of an association between the spectral locations of the UV and visible reflectance bands may result from the limited variation in spectral location of the UV band. These patterns suggest that plumage colours are subject to constraints, just as are more traditional morphological characters. © 2005 The Linnean Society of London, Biological Journal of the Linnean Society, 2005, 84 , 243–257.     

Structural and optical properties of Cu‐doped ZnS nanoparticles formed in chitosan/sodium alginate multilayer films

Chitosan/alginate multilayers were fabricated using a spin‐coating method, and ZnS:Cu nanoparticles were generated within the network of two natural polysaccharides, chitosan and sodium alginate. The synthesized nanoparticles were characterized using an X‐ray diffractometer (XRD), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and atomic force microscopy (AFM). The results showed that cubic zinc blende‐structured ZnS:Cu nanoparticles with an average crystal size of ~ 3 nm were uniformly distributed. UV–vis spectra indicate a large quantum size effect and the absorption edge for the ZnS:Cu nanoparticles slightly shifted to longer wavelengths with increasing Cu ion concentrations. The photoluminescence of the Cu‐doped ZnS nanoparticles reached a maximum at a 1% doping level. The ZnS:Cu nanoparticles form and are distributed uniformly in the composite multilayer films with a surface average height of 25 nm. Copyright © 2013 John Wiley & Sons, Ltd.     

A colorimetric assay for 7-dehydrocholesterol with potential application to screening for Smith-Lemli-Opitz syndrome

Smith-Lemli-Opitz syndrome (SLOS; MIM 270400) is a genetic disorder characterized by hypocholesterolemia and elevated 7-dehydrocholesterol (7DHC) levels resulting from mutations affecting 7-dehydrocholesterol reductase. We describe a colorimetric assay for 7DHC with potential application to large-scale screening for SLOS. Reaction of 7DHC and its esters with the Liebermann-Burchard reagent resulted in a brief initial absorbance at 510 nm (pink color) followed by an absorbance at 620 nm (blue color) after 2 min, while cholesterol samples were essentially colorless. The assay could identify typical SLOS blood samples by their pink color and increased absorbance at 620 nm after 2 min. Colorimetric identification of mild SLOS cases requires monitoring of the transient absorbance at 510 nm, which must be detected immediately after rapid, consistent mixing of the reagents. The need for special mixing devices and rigorous validation precludes sporadic use of the assay for diagnosing suspected SLOS cases. We also studied the stability of 7DHC in dried SLOS blood spots on Guthrie cards, which are widely used for archiving neonatal blood. Decomposition of 7DHC was effectively retarded by storage at low temperature and by precoating of the cards with antioxidants. The combined results provide a foundation for development of a simple, automated test for SLOS screening.     

Colorimetric detection of gallic acid based on the enhanced oxidase‐like activity of floral‐like magnetic Fe3O4@MnO2

In this study, a colorimetric method was developed for rapid and sensitive determination of gallic acid (GA) by using floral‐like magnetic Fe₃O₄@MnO₂ composite material with enhanced oxidase‐like activity. Fe₃O₄@MnO₂ composite material is able to oxidize 3,3′,5,5′‐tetramethylbenzidine (TMB) to a blue product (oxTMB) with apparent color change and absorbance at 652 nm. GA can reduce the oxTMB yielding a fading blue color. Based on these results, a technique is proposed to detect GA quantitatively and qualitatively with UV–vis spectroscopy and bare eyes. A low detection limit of 0.105 μM and a detection range of 0.01 to 15 μM were obtained with UV–vis spectroscopy. This methodology possesses high potential for application in determination of GA.     

Evaluation of inhibitory effects of heavy metals on anaerobic ammonium oxidation (anammox) by continuous feeding tests

To facilitate the application of anaerobic ammonium oxidation (anammox) to a nitrogen removal process, the effects of heavy metals (Ni, Cu, Co, Zn, and Mo) on anammox bacteria entrapped in gel carriers were examined by conducting continuous feeding tests for each metal. The results show that all anammox activities decreased by more than 10 % when influent concentrations of Ni, Cu, Co, Zn, and Mo were 5, 5, 5, 10, and 0.2 mg/L, respectively. It was observed that the effects of Ni, Cu, Co, and Zn on anammox activity were reversible and that of Mo on anammox activity was irreversible. Anammox activity was not affected when influent containing mixed Ni, Cu, Co, and Zn (0.5 mg/L) was fed into the reactor.     

Insights into the Effects of Electrolyte Composition on the Performance and Stability of FeF2 Conversion‐Type Cathodes

As an alternative to commercial Ni‐ and Co‐based intercalation‐type cathode materials, conversion‐type metal fluoride (MF_x) cathodes are attracting more interest due to their promises to increase cell‐level energy density when coupled with lithium (Li) or silicon (Si)‐based anodes. Among metal fluorides, iron fluorides (FeF₂ and FeF₃) are regarded as some of the most promising candidates due to their high capacity, moderately high potential and the very low cost of Fe. In this study, the impacts of electrolyte composition on the performance and stability of nanostructured FeF₂ cathodes are systematically investigated. Dramatic impacts of Li salt composition, Li salt concentration, solvent composition, and cycling potential range on the cathode's most critical performance parameters—stability, capacity, rate, and voltage hysteresis are discovered. In contrast to previous beliefs, it is observed that even if the Fe²⁺ cation dissolution could be avoided, the dissolution of F^? anions may still negatively affect cathode performance. Formation of the more favorable cathode solid electrolyte interface (CEI) is found to minimize both processes.     

Copper and nickel binding to canine serum albumin. A circular dichroism study

The binding of copper and nickel to canine serum albumin has been studied using circular dichroism. In the 320-700 nm region, only a single positive extremum was observed at about 664-667.5 nm for copper bound to canine serum albumin. The intensity of this extremum was found to increase until a Cu2+/albumin molar ratio of 3 was reached. Further addition of Cu2+ led to a decrease in ellipticity. The absence of any extrema in the 560-570 and 480-510 nm regions showed that histidines were not involved in copper binding to canine albumin. In the case of nickel, initial binding was found to take place at the N-terminal tripeptide. At higher nickel to albumin molar ratios, circular dichroism spectra indicated the presence sulfur containing ligands but showed no evidence for the involvement of histidines. Canine serum albumin was found to bind six or more Cu2+ and Ni2+ ions with affinities that are lower than for human or bovine serum albumin.     

UV light‐tunable fluorescent inks and polymer hydrogel films based on carbon nanodots and lanthanide for enhancing anti‐counterfeiting

Novel water‐soluble green fluorescent carbon nanodots (CNs) using methacrylic acid and m‐phenylenediamine as precursors were first synthesized using a one‐pot hydrothermal method. Red fluorescent lanthanide complexes were prepared using lanthanide ion Eu³⁺ and pyridine‐2,6‐dicarboxylic acid. The optical properties of CNs were characterized using ultraviolet visible (UV) spectra and fluorescence spectra, microscopic morphology was characterized using transmission electron microscopy (TEM) and dynamic light scattering (DLS), and the elemental composition was characterized using Fourier transform‐infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectra (XPS). The fluorescence spectra of the lanthanide complexes were also measured. A simple strategy was developed to prepare UV light‐tunable fluorescent inks and polymer hydrogels films based on CNs and lanthanide complexes. The fluorescent inks and polymer hydrogels films could be repeatedly switched between green and red fluorescence. The change of color depended on luminescence of the CNs and the lanthanide complexes under 254 and 365 nm UV light, respectively. The UV light‐tunable fluorescent inks and polymer hydrogels films could enhance its anti‐counterfeiting function for data and information.     

Suitability of different fluorescent powders for mass-marking the Chrysomelid, Diabrotica virgifera virgifera LeConte

Abstract:  The Western Corn Rootworm, Diabrotica virgifera virgifera LeConte (Col., Chrysomelidae), is an invasive alien pest of maize, Zea mays , in Europe. The suitability of 14 fluorescent powders for mass-marking the adults was studied in laboratory and in field cages. The visual discrimination between remaining spots of each colour on the beetles was investigated under ultraviolet (UV) light, as well as their retention time and the influences of those colours on the beetle survival and flight take-off response. The two best recognizable orange colours (i.e. of Radiant Colour and of Fiesta Colours Swada) were proposed for field experiments in first priority, followed by an orange and a yellow (both Magruder Colour), another yellow (Fiesta) and a pink (Radiant), as all did not affect beetle survival and flight take-off response and were recognizable under UV light for at least 10 days in the field. In contrast, the colours yellow and green (Radiant), red and blue (Magruder), yellow (Ciba Geigy) and pink (Fiesta) were unsuitable, because they either quickly disappeared from the beetles or adversely affected beetle survival or flight take-off response. For mass releases with differently marked beetles, only the use of a single orange colour together with a single yellow colour or the use of a pink colour together with a yellow colour can be used since few spots can clearly be discriminated from each other under UV light.     

Selective recognition of thymidine homopolymer (poly T) oligonucleotide with cobalt(II)–4‐[(5‐chloro‐2‐pyridyl)azo]‐1,3‐diaminobenzene complex

The interactions of cobalt(II)–4‐[(5‐chloro‐2‐pyridyl)azo]‐1,3‐diaminobenzene (5‐Cl‐PADAB) complex with different kinds of homopolymer oligonucleotides in basic medium were investigated based on the measurements of resonance light scattering, UV–vis, circular dichroism spectra and dark field light‐scattering imaging. Experiments showed that only thymidine homopolymer (poly T) oligonucleotides with the length in the range of poly T₆ to poly T₁₈ could interact with the Co(II)–5‐Cl‐PADAB complex in alkaline conditions and cause evident color and spectral change. Thus, the binary complex of Co(II)–5‐Cl‐PADAB could be employed as a visual probe for selectively recognizing the poly T oligonucleotides. Copyright © 2009 John Wiley & Sons, Ltd.     

Blue–green opponency and trichromatic vision in the greenhouse whitefly (Trialeurodes vaporariorum) explored using light emitting diodes

Visual orientation in the greenhouse whitefly (Trialeurodes vaporariorum Westwood, Hemiptera: Aleyrodidae) is the result of “wavelength‐specific behaviours.” Green–yellow elicits “settling behaviour” while ultraviolet (UV) radiation initiates “migratory behaviour.” The only available physiological study of the photoreceptors' spectral efficiency showed peaks in the green and the UV range and whitefly vision was said to be dichromatic so far. In order to study the visual behaviour of T. vaporariorum, 19 narrow‐bandwidth light emitting diodes (LEDs) covering the UV‐A and visible range were used in combination with light scattering acrylic glass screens in a small‐scale choice arena under greenhouse conditions. Multiple‐choice and dual‐choice assays were performed, resulting in LED‐based behavioural action spectra of settling (green) and migratory behaviour (UV). A potential inhibitory blue–green chromatic mechanism was studied by combining yellow with different bluish LEDs. Intensity dependencies were illustrated by changing LED intensities. Regarding the “settling response,” highest attraction was achieved by a green LED with a centroid wavelength of 550 nm, while a blue LED with 469 nm proved to be most inhibitory. Besides this inhibitory interaction, an intensity dependence was observed within the action spectrum in the green–yellow range. “Migratory behaviour” was elicited the most by the UV LED with the shortest available wavelength of 373 nm. The results provide compelling behavioural evidence for the presence of a green and a yet undescribed blue sensitive photoreceptor and a blue–green opponent mechanism. Furthermore, empirical colour choice models were built and receptor peaks were estimated around 510–520 nm (green), 480–490 nm (blue) and 340–370 nm (UV). Consequently, a trichromatic receptor setup is suggested for T. vaporariorum.     

Chemiluminescence assay for Listeria monocytogenes based on Cu/Co/Ni ternary nanocatalyst coupled with penicillin as generic capturing agent

Bacterial pathogen control is important in seafood production. In this study, a Cu/Co/Ni ternary nanoalloy (Cu/Co/Ni TNA) was synthesized using the oleylamine reducing method. It was found that Cu/Co/Ni TNA greatly enhanced the chemiluminescence (CL) signal of the hydroxylamine‐O‐sulfonic acid (HOSA)–luminol system. The CL properties of Cu/Co/Ni TNA were investigated systemically. The possible CL mechanism also was intensively investigated. Based on the enhanced CL phenomenon of Cu/Co/Ni TNA, a Cu/Co/Ni TNA, penicillin, and anti‐L. monocytogenes (Listeria monocytogenes) antibody‐based sandwich complex assay for detection of L. monocytogenes was established. In this sandwich CL assay, penicillin was employed to capture and enrich pathogenic bacteria with penicillin‐binding proteins (PBPs) while anti‐L. monocytogenes antibody was adopted as the specific recognition molecule to recognize L. monocytogenes. L. monocytogenes was detected sensitively based on this new Cu/Co/Ni TNA–HOSA–luminol CL system. The CL intensity was proportional to the L. monocytogenes concentration ranging from 2.0 × 10² CFU ml^?1 to 3.0 × 10⁷ CFU ml^?1 and the limit of detection wa 70 CFU ml^?1. The reliability and potential applications of our method was verified by comparison with official methods and recovery tests in environment and food samples.     

Visual response of the tomato fruit fly, Neoceratitis cyanescens, to colored fruit models

To determine how mature females of the tomato fruit fly, Neoceratitis cyanescens (Bezzi) (Diptera: Tephritidae), detect host fruit after arriving in their host plant habitat, behavioral responses to colored models were observed in a laboratory flight chamber. Host‐seeking females oriented themselves preferentially towards bright orange spheres (3.7 cm in diameter), irrespective of their natal host fruit: tomato, bug weed, or black nightshade. Females oriented themselves preferentially towards the orange sphere when placed against a fluorescent yellow background as opposed to a black background, but the distribution of responses to the set of colored spheres did not vary significantly with background color. In a choice situation between bright orange spheres of various sizes (1.9, 3.7, and 7.5 cm in diameter), females landed preferentially on the bigger sphere. However, they preferred a yellow color when the latter was associated with two‐dimensional models, probably mimicking leaves. The attractiveness of orange spheres depended more on the proportion of reflected light in the spectral region around 610 nm than brightness of color in itself. Low light intensity significantly influenced the activity of the flies but not their visual preference. The strong response of females to bright orange spheres confirmed the importance of visual characteristics in short‐range mechanisms of host‐plant location in specialist insects. Responses to fruit visual stimuli are discussed relative to other Tephritidae, host‐finding strategy, and pest management.     

Reaction‐based probe for hydrogen sulfite: dual‐channel and good ratiometric response

We designed and synthesized a new series of intramolecular charge transfer (ICT) molecules (compounds T1, T2 and T3) by attaching various electron‐donating thiophene groups to the triphenylamine backbone with aldehyde group as the electron acceptor. Based on the nucleophilic addition reaction between hydrogen sulfite and aldehyde, all compounds could act as ratiometric optical probe for hydrogen sulfite and displayed efficient chromogenic and fluorogenic signaling. Upon the addition of hydrogen sulfite anions, probe T3 displayed apparent fluorescent color changes from yellowish‐green to blue, with a large emission wavelength shift (Δλ = 120 nm). T3 responded to hydrogen sulfite with high sensitivity and the detection limit was determined to be as low as 0.9 μM. At the same time, apparent changes in UV–vis spectra could also be observed. By virtue of the special nucleophilic addition reaction with aldehyde, T3 displayed high selectivity over other anions. Copyright © 2016 John Wiley & Sons, Ltd.