Direct observation of poly(3-hydroxybutyrate) depolymerase adsorbed on polyester thin film by atomic force microscopy

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerases adsorbed on poly(L-lactide) (PLLA) thin film were directly observed by atomic force microscopy (AFM). A PLLA thin film of 100 nm thickness was prepared on a silicon wafer by spin-cast method. The PLLA thin film was treated at 220 degrees C and quenched to room temperature, resulting in the formation of a completely amorphous film with a smooth surface. Then, the PHB depolymerases from Pseudomonas stutzeri YM1006 and Ralstonia pickettii T1 were dispersed on the amorphous PLLA thin film. Direct AFM observation has revealed that the PHB depolymerases bind in an elliptic shape on the surface of the PLLA thin film and that a small ridge is created around each enzyme molecule. After removal of the enzymes with 40% ethanol aqueous solution, small hollows were found on the PLLA thin film. These results suggest that a PHB depolymerase interacts with polyester molecules during their adsorption to make a hollow on the substrate surface.     

Phase structure and enzymatic degradation of poly(L-lactide)/atactic poly(3-hydroxybutyrate) blends: an atomic force microscopy study

Phase structures and enzymatic degradation of poly(l-lactide) (PLLA)/atactic poly(3-hydroxybutyrate) (ata-PHB) blends with different compositions were characterized by using atomic force microscopy (AFM). Differential scanning calorimetry (DSC) thermograms of PLLA/ata-PHB blends with different compositions showed two glass transition temperatures, indicating that the PLLA/ata-PHB blends are immiscible in the melt. Surface morphologies of the thin films for PLLA/ata-PHB blends were determined by AFM. Phase separated morphology was recognized from the AFM topography and phase images. The domain size of the components was dependent on the blend ratio. Enzymatic degradation of the PLLA/ata-PHB blends was performed by using both PHB depolymerase and proteinase K. Either PLLA or ata-PHB domains were eroded depending on the kinds of enzyme. Surface morphologies after enzymatic degradation have revealed the phase structure along the depth direction. Enzymatic adsorption of PHB depolymerase was examined on the surface of PLLA/ata-PHB blends. The enzyme molecules were found on both domains of the binary blends. The larger number of enzyme molecules was found on the PLLA domains relative to those on the ata-PHB domains, suggesting the higher affinity of the enzyme against PLLA domain.     

Adsorption and hydrolysis reactions of poly(hydroxybutyric acid) depolymerases secreted from Ralstonia pickettii T1 and Penicillium funiculosum onto poly[(R)-3-hydroxybutyric acid

Reaction processes of poly[(R)-3-hydroxybutyric acid] (P(3HB)) with two types of poly(hydroxybutyric acid) (PHB) depolymerases secreted from Ralstonia pickettii T1 and Penicillium funiculosum were characterized by means of atomic force microscopy (AFM) and quartz crystal microbalance (QCM). The PHB depolymerase from R. pickettii T1 consists of catalytic, linker, and substrate-binding domains, whereas the one from P. funiculosum lacks a substrate-binding domain. We succeeded in observing the adsorption of single molecules of the PHB depolymerase from R. pickettii T1 onto P(3HB) single crystals and the degradation of the single crystals in a phosphate buffer solution at 37 degrees C by real-time AFM. On the contrary, the enzyme molecule from P. funiculosum was hardly observed at the surface of P(3HB) single crystals by real-time AFM, even though the enzymatic degradation of the single crystals was surely progressed. On the basis of the AFM observations in air of the P(3HB) single crystals after the enzymatic treatments, however, not only the PHB depolymerase from R. pickettii T1 but also that from P. funiculosum adsorbed onto the surface of P(3HB) crystals, and both concentrations of the enzymes on the surface were nearly identical. This means both enzymes were adsorbed onto the surface of P(3HB) single crystals. Moreover, QCM measurements clarified quantitatively the differences in detachment behavior between two types of PHB depolymerases, namely the enzyme from R. pickettii T1 was hardly detached but the enzyme from P. funiculosum was released easily from the surface of P(3HB) crystals under an aqueous condition.     

Enzymatic degradation of poly(L-lactide) film by proteinase K: quartz crystal microbalance and atomic force microscopy study

Enzymatic degradation of the poly(L-lactide) (PLLA) amorphous film by proteinase K has been investigated by combination of the complementary techniques of quartz crystal microbalance and atomic force microscopy (AFM). The erosion rate increased with increasing enzyme concentrations and attained to be constant under the condition of [proteinase K] > 100 microg/mL. The amount of the enzyme molecules adsorbed to the film was quantitatively evaluated at various concentrations by AFM, and it revealed that the erosion rate is determined by the amount of adsorbed enzyme. Adsorption of proteinase K was irreversible despite lack of the binding domain, so that the enzyme molecules on the film surface could be observed directly by AFM. Transformation of the enzyme molecule caused by packing in high density on the surface was observed at higher enzyme concentrations. The "footprint" of the individual proteinase K molecule on the PLLA film after enzymatic degradation suggests that the enzyme moves on the surface to hydrolyze the film around it.     

Nonhydrolytic fragmentation of a poly[(R)-3-hydroxybutyrate] single crystal revealed by use of a mutant of polyhydroxybutyrate depolymerase

This paper reports the initial process of the enzymatic degradation of solution-grown lamellar single crystals of bacterial poly[(R)-3-hydroxybutyrate] (P(3HB)) with an extracellular polyhydroxybutyrate (PHB) depolymerase purified from Alcaligenes faecalis T1. We used a hydrolytic-activity-disrupted mutant of the PHB depolymerase in order to avoid the influence of hydrolytic reaction in the system. The effect of addition of the mutant enzyme upon the P(3HB) single crystals was investigated by turbidimetric assay, high-performance liquid chromatography (HPLC), and atomic force microscopy (AFM). Suspension turbidity of the P(3HB) single crystals increased after addition of the mutant enzyme having no hydrolytic activity. No soluble product from the P(3HB) single crystals with the mutant enzyme was detected by HPLC. AFM observation of the P(3HB) single crystals adsorbed on highly ordered pyrolytic graphite revealed that the mutant enzyme yielded a lot of lengthwise crystal fragments from the P(3HB) single crystals. On the basis of these results, we concluded that the mutant enzyme disturbs the molecular packing of the P(3HB) polymer chain around the loose chain packing region in the single crystal, resulting in the fragmentation. Therefore, it is suggested that the enzymatic degradation of P(3HB) single crystals with a wild-type PHB depolymerase progresses via three steps: (1) adsorption of the enzyme onto the surface of the single crystal; (2) disturbance of the molecular packing of P(3HB) polymer chain in the single crystal by the adsorbed enzyme; and (3) hydrolysis of the disturbed polymer chain by the adsorbed enzyme.     

Adsorption of chitosan on PET films monitored by quartz crystal microbalance

The adsorption behavior of chitosan on poly(ethylene terephthalate) (PET) model film surface was studied using the quartz crystal microbalance (QCM) technique. QCM with a dissipation unit (QCM-D) represents a very sensitive technique for adsorption studies at the solid/liquid interface in situ, with capability of detecting a submonolayer of adsorbate on the quartz crystal surface. Chitosan as well as PET were chosen for this study due to their promising biocompatible properties and numerous possibilities to be used in biomedical applications. As a first step, PET foils were activated by alkaline hydrolysis in order to increase their hydrophilicity. Model thin films were prepared from PET foils by the spin coating technique. The chemical composition of the obtained model PET films was analyzed using X-ray photoelectron spectroscopy (XPS) and their morphology was characterized by atomic force microscopy (AFM). Furthermore, the adsorption behavior of chitosan on these activated PET films and the influence of adsorption parameters (pH, ionic strength and chitosan solution concentration) were investigated in detail. Additionally, the surface chemistry and morphology of the PET films and the chitosan coated PET films were analyzed with XPS and AFM.     

Effect of water on the surface molecular mobility of poly(lactide) thin films: an atomic force microscopy study

Physical properties associated with molecular mobility on the surface of thin films with 300 nm thickness for poly(lactide)s (PLAs) were studied under vacuum conditions as well as under aqueous conditions by using friction force mode atomic force microscopy (AFM). Two types of PLAs were applied for the experimental samples as uncrystallizable PLA (uc-PLA) and crystallizable PLA (c-PLA). The friction force on the surface of thin films was measured as a function of temperature to assess the surface molecular mobility both under vacuum and under aqueous conditions. A lower glass-transition temperature of the uc-PLA surface in water was detected than that under vacuum conditions. In the case of the c-PLA thin film, change in friction force was detected at a lower temperature under aqueous conditions than in vacuo. A morphological change was observed in the c-PLA thin film during heating process from room temperature to 100 degrees C by temperature-controlled AFM. The surface of the c-PLA thin film became rough due to the cold crystallization, and the crystallization of c-PLA molecules in water took place at a lower temperature than in vacuo. These friction force measurements and AFM observations suggest that molecular motion on the surface of the both uc- and c-PLA thin films is enhanced in the presence of water molecules. In addition, in situ AFM observation of the enzymatic degradation process for the c-PLA thin film crystallized at 160 degrees C was carried out in buffer solution containing proteinase K at room temperature. The amorphous region around the hexagonal crystal was eroded within 15 min. It has been suggested that the adsorption of water molecules on the PLA film surface enhances the surface molecular mobility of the glassy amorphous region of PLA and induces the enzymatic hydrolysis by proteinase K.     

Morphology and enzymatic degradation of oriented thin film of ultrahigh molecular weight poly[(R)-3-hydroxybutyrate

Thin films of ultrahigh molecular weight poly[(R)-3-hydroxybutyrate] (P(3HB)) were sheared and isothermally crystallized at 100 degrees C. Transmission electron microscopy and atomic force microscopy (AFM) observations revealed that thick fibrous textures, on which lamellae are overgrown normal to the long axis of the fibril, run parallel to the shearing direction. A selected area electron diffraction pattern taken from the fibrils exhibits a fiber pattern of P(3HB) alpha-modification, and the crystallographic c-axis (chain axis) of P(3HB) is set parallel to the long axis of the fibril. In situ AFM observations of enzymatic degradation for the thin film were performed with an extracellular P(3HB) depolymerase from Ralstonia pickettii T1 in a buffer solution. The film surface and thickness became rougher and thinner, respectively, with time after adding the enzyme. During the degradation, fine shish-kebab structures appeared gradually. This fact supports that the amorphous region in the film is preferentially degraded rather than the crystalline one by the depolymerase. The in situ AFM observations also revealed that one thick fibril in the original film is composed of three different states, namely, finer fibril (shish), stacked lamellae (kebab) in edge-on state, and the surrounding amorphous phase.     

Adsorption of plasmid DNA onto N,N'- (dimethylamino)ethyl-methacrylate graft-polymerized poly-L-lactic acid film surface for promotion of in-situ gene delivery

The surface of biodegradable poly-L-lactic acid (PLLA) film was modified with N,N'-(dimethylamino)ethyl-methacrylate (DMAEMA) via UV-induced graft copolymerization, and plasmid DNA molecules were adsorbed onto the surface of modified PLLA film by electrostatic interactions with cationic DMAEMA polymer. We characterized the structure of the modified PLLA film surface by Fourier transform infrared attenuated total reflection (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The weight-average molecular weight (Mw) of grafted DMAEMA polymer chains was estimated from the elution time of gel filtration chromatography. C.I. Acid Orange 7 dyeing results indicated that graft density of DMAEMA on PLLA film increased with the UV irradiation time and then reached a saturated value. DNA adsorption density was proportioned to graft density of DMAEMA. Mouse fibroblast L929 cell line was cultured on modified PLLA films, and cell viability and gene transfection efficiency were monitored after 2 days culture. It was found that the DMAEMA grafted PLLA film had obvious cytotoxicity to the cells. On the contrary, cytotoxicity of the surface was highly decreased after adsorption with plasmid DNA. This DNA adsorbed DMAEMA modified PLLA showed the ability to deliver DNA into mammalian cells cultured on the surface with high-transfection efficiency at a low DNA amount. The present results suggest that the DMAEMA grafted PLLA has potentiality to be used as a safe and effective gene delivery system in gene-activated materials.     

Enzymatic, alkaline, and autocatalytic degradation of poly(L-lactic acid): effects of biaxial orientation

The hydrolytic degradation of biaxially oriented and de-oriented (melt-crystallized) poly(l-lactic acid) (PLLA) films was investigated in Tris-HCl-buffered solution (pH 8.6) with proteinase K, alkaline solution, and phosphate-buffered solution (pH 7.4) by the use of gravimetry, gel permeation chromatography, differential scanning calorimetry, and scanning electron microscopy. Biaxial orientation disturbed the proteinase K-catalyzed enzymatic degradation of PLLA films and the effects of biaxial orientation overcame those of crystallinity. The former may be due to the fact the enzyme cannot attach to the extended (strained) chains in the amorphous regions of the biaxially oriented PLLA film or cannot catalyze the cleavage of the strained chains. Another probable cause is that the enzyme can act only at the film surface of the biaxially oriented PLLA film, in marked contrast with the case of the de-oriented PLLA films where enzymatic degradation can proceed beneath the spherulitic crystalline residues. The effects of biaxial orientation on the alkaline and autocatalytic degradation of the PLLA films were insignificant for the periods studied here. The crystallinity rather than the biaxial orientation seems to determine the alkaline and autocatalytic degradation rates of the PLLA films. The accumulation of crystalline residues formed as a result of selective cleavage and removal of the amorphous chains was observed for the de-oriented PLLA films, but not for the biaxially oriented PLLA film, when degraded in the presence of proteinase K. This means the facile release of formed crystalline residues from the surface of the biaxially oriented PLLA film during enzymatic degradation, due to the fact that the crystalline regions of the biaxially oriented PLLA film were oriented with their c axis parallel to the film surface.     

Nonspecific hydrophobic interactions of a repressor protein, PhaR, with poly[(R)-3-hydroxybutyrate] film studied with a quartz crystal microbalance

The gene expression for phasins (PhaP), which are predominantly polyhydroxyalkanoates (PHAs) granule-associated proteins, is regulated by a repressor protein of PhaR through the dual binding abilities of PhaR to the target DNAs and the granules. In this study, the binding functions of PhaR to poly[(R)-3-hydroxybutyrate] (P(3HB)) were investigated quantitatively by using a quartz crystal microbalance (QCM) technique. Adsorption of PhaR onto a melt-crystallized film of P(3HB) (cr-P(3HB)) was detected as a negative frequency shift of the QCM. The time course of the frequency changes observed for PhaR adsorption was composed of a quick frequency decrease at an initial stage and a subsequent slower frequency decrease for several hours, indicating multilayered adsorption of PhaR molecules onto cr-P(3HB). The initial rapid adsorption, which corresponds to direct adsorption of PhaR molecules onto a bare surface of cr-P(3HB), was a diffusion-controlled process. Strong interactions between PhaR and cr-P(3HB) were also observed as apparently irreversible adsorption. The comparative QCM measurement of PhaR adsorption onto various types of polymers with different aliphatic chemical structures revealed that PhaR was adsorbed onto the surfaces of polymers, including cr-P(3HB), mainly by nonspecific hydrophobic interactions. These results illustrate the high affinity and low specificity for adsorption of PhaR to P(3HB).     

Charge-dependent sidedness of cytochrome P450 forms studied by quartz crystal microbalance and atomic force microscopy

Quartz crystal microbalance (QCM) resonance measurements were used to examine the surface charge characteristics of cytochrome P450 forms and the influence of charge on the docking of redox partners like cytochrome b5. The distal surface of cytochrome P450 (CYP)101 (pI = 4.5), relative to the heme, is fairly anionic, as is the proximal surface. The latter, however, also has two cationic clusters. A considerably greater extent of CYP101 binding was seen to the cationic, polyethylene-surfaced resonators. CYP2B4 (pI = 8.5) preferentially bound to the polyanionic, polystyrene sulfonate-surfaced resonators. Cytochrome b5 is an acidic protein that had a preferential binding to the poly(ethyleneimine (PEI)-surfaced resonators. When binding to CYP2B4-surfaced films, cytochrome b5 preferentially bound to those cytochrome P450 molecules that were adsorbed to cationic (PEI) films. It is suggested that adsorption of CYP2B4 to an anionic poly(styrenesulfonate) (PSS) surface is with cationic clusters that include the cytochrome b5 docking domain. This diminishes the extent of docking of the cytochrome b5. In contrast, when CYP2B4 is adsorbed to a cationic film the proximal surface with the cytochrome b5-docking site is available for cytochrome b5 binding. A film of the polycation PEI was adsorbed to the silver QCM surface. It formed polymer islands when viewed with atomic force microscopy. Polyanionic PSS was adsorbed intermittently with the PEI. By the third and fourth layer of polyions the polymer islands were essentially merged and protein adsorption as a fourth or fifth layer formed a nearly continuous film. CYP101 was seen to adsorb as globules with a molecular diameter of about 10 nm. CYP2B4 adsorbed to the polyionic films had a slightly elliptical globular shape, also with a molecular diameter of about 10 nm.     

Properties of a novel intracellular poly(3-hydroxybutyrate) depolymerase with high specific activity (PhaZd) in Wautersia eutropha H16

A novel intracellular poly(3-hydroxybutyrate) (PHB) depolymerase (PhaZd) of Wautersia eutropha (formerly Ralstonia eutropha) H16 which shows similarity with the catalytic domain of the extracellular PHB depolymerase in Ralstonia pickettii T1 was identified. The positions of the catalytic triad (Ser190-Asp266-His330) and oxyanion hole (His108) in the amino acid sequence of PhaZd deduced from the nucleotide sequence roughly accorded with those of the extracellular PHB depolymerase of R. pickettii T1, but a signal peptide, a linker domain, and a substrate binding domain were missing. The PhaZd gene was cloned and the gene product was purified from Escherichia coli. The specific activity of PhaZd toward artificial amorphous PHB granules was significantly greater than that of other known intracellular PHB depolymerase or 3-hydroxybutyrate (3HB) oligomer hydrolases of W. eutropha H16. The enzyme degraded artificial amorphous PHB granules and mainly released various 3-hydroxybutyrate oligomers. PhaZd distributed nearly equally between PHB inclusion bodies and the cytosolic fraction. The amount of PHB was greater in phaZd deletion mutant cells than the wild-type cells under various culture conditions. These results indicate that PhaZd is a novel intracellular PHB depolymerase which participates in the mobilization of PHB in W. eutropha H16 along with other PHB depolymerases.     

Enzymatic degradation of polyester films by a cutinase-like enzyme from Pseudozyma antarctica: surface plasmon resonance and atomic force microscopy study

Enzymatic degradation of polyester films by a cutinase-like enzyme from Pseudozyma antarctica JCM10317 (PaE) was analyzed by surface plasmon resonance (SPR). The adsorption of PaE and the degradation rate for polyester films were quantitatively monitored by a positive and negative SPR signal shifts, respectively. The decrease in SPR signal and the erosion depth of amorphous poly(l-lactide) (a-PLLA) film measured by atomic force microscopy (AFM) had a linear relationship, and the weight loss was estimated from the AFM data combined with a density of a-PLLA film. Furthermore, SPR sensorgrams for various polyester films showed that degradation rate of poly(ε-caprolactone) and poly(butylene succinate-co-adipate) which contain C6 units was higher than that of other polyesters such as poly(butylene succinate) and a-PLLA. These results suggest that C6 is the preferred chain length as substrates for PaE.     

Enzymatic degradation processes of lamellar crystals in thin films for poly[(R)-3-hydroxybutyric acid] and its copolymers revealed by real-time atomic force microscopy

Enzymatic degradation processes of flat-on lamellar crystals in melt-crystallized thin films of poly[(R)-3-hydroxybutyric acid] (P(3HB)) and its copolymers were characterized by real-time atomic force microscopy (AFM) in a phosphate buffer solution containing PHB depolymerase from Ralstonia pickettii T1. Fiberlike crystals with regular intervals were generated along the crystallographic a axis at the end of lamellar crystals during the enzymatic degradation. The morphologies and sizes of the fiberlike crystals were markedly dependent on the compositions of comonomer units in the polyesters. Length, width, interval, and thickness of the fiberlike crystals after the enzymatic degradation for 2 h were measured by AFM, and the dimensions were related to the solid-state structures of P(3HB) and its copolymers. The width and thickness decreased at the tip of fiberlike crystals, indicating that the enzymatic degradation of crystals takes place not only along the a axis but also along the b and c axes. These results from AFM measurement were compared with the data on crystal size by wide-angle X-ray diffraction, and on lamellar thickness and long period by small-angle X-ray scattering. In addition, the enzymatic erosion rate of flat-on lamellar crystals along the a axis was measured from real-time AFM height images. A schematic glacier model for the enzymatic degradation of flat-on lamellar crystals of P(3HB) by PHB depolymerase has been proposed on the basis of the AFM observations.     

Synthesis, solid-state structure, and surface properties of end-capped poly(L-lactide)

End-capped poly(L-lactide) (PLLA) samples with dodecyl or 2-(2-(2-methoxyethoxy)ethoxy)ethyl (MEEE) ester were synthesized by ring-opening polymerization of L-lactide in the presence of zinc dodecanoxide or zinc 2-(2-(2-methoxyethoxy)ethoxy)ethoxide as a catalyst, respectively. On the basis of NMR analysis, it was confirmed that the carboxylic acid chain ends of PLLA molecules were selectively substituted by dodecyl or MEEE ester groups. To evaluate the wettability on the surface of end-capped PLLA films, the advancing contact angle (thetaa) with water was measured. The amorphous PLLA films showed relatively similar thetaa values regardless of the chemical structure of the polymer chain end. In contrast, the thetaa values of semicrystalline films were varied over a wide range, dependent on the chemical structure of the chain end. In addition, the thetaa values of dodecyl ester end-capped PLLA film with low molecular weight increased with an increase in the crystallization temperature. Both the crystallinity and lamellar thickness of dodecyl ester end-capped PLLA films increased with the crystallization temperature. These results suggest that the segregation of the chain ends on the PLLA film surface was strongly affected by the crystallization conditions.     

Adsorption characteristics of P(3HB) depolymerase as evaluated by surface plasmon resonance and atomic force microscopy

Molecular recognition of poly[(R)-3-hydroxybutyrate] (P(3HB)) depolymerase from Ralstonia pickettii T1 to the surfaces of biodegradable aliphatic polyesters such as P(3HB) and poly(L-lactic acid) (PLLA) was examined from the viewpoints of kinetics and dynamics. To determine the kinetic parameters on the interaction between the substrate-binding domain (SBD) of P(3HB) depolymerase and various polymer substrates with different chemical structures, surface plasmon resonance (SPR) measurements were performed. On the other hand, using an atomic force microscopic (AFM) cantilever tip functionalized with the SBD of P(3HB) depolymerase, the mechanical parameters such as unbinding force to the polymer surfaces were measured. Both the SPR and AFM measurements showed that the SBD has a high affinity to P(3HB) and PLLA. From the results of kinetics and dynamics, the energy potential landscape of SBD-polymer interaction was disclosed on the basis of a phenomenological model, and the mechanism of the interaction was discussed.     

Change of surface structure of poly(3-hydroxybutyrate) film upon enzymatic hydrolysis by PHB depolymerase

The change in the surface structure of poly[(R)-3-hydroxybutyrate] [PHB] films upon the enzymatic hydrolysis was analyzed by attenuated total reflection infrared [ATR/IR] spectrometry. As enzymes, PHB depolymerases isolated from Ralstonia pickettii T1 and Pseudomonas stutzeri were used. By curve decomposition of the carbonyl stretching band of ATR/IR spectra, the change in the surface crystallinity of PHB films by exposure to buffer containing 0, 1, and 4 microg of PHB depolymerases was estimated. It has been widely believed that the enzymatic hydrolysis first occurs in the amorphous phase, followed by the degradation in the crystalline phase, and extracellular PHB depolymerase can degrade only polymer chains in the surface layer of the film. Therefore, the surface crystallinity had been expected to increase upon the enzymatic degradation. However, the results were contrary to this expectation. The surface crystallinity was decreased by the enzymatic attack. Because ATR/IR spectrometry is sensitive to a small change in molecular structure of the sample surface, the decrease in the crystallinity shown by ATR/IR experiments probably does not indicate the complete loss of regularity of the crystalline phase. Because the chains at crystalline surface are more mobile than those inside the crystals, the C=O band for crystalline surface may appear at a position similar to those of the amorphous or interfacial phase in ATR/IR spectra of PHB. Only the chains inside the crystals may contribute to the C=O band of the crystalline phase. Thus, we rather suppose that the decrease in the crystalline peak of the ATR/IR spectra reflects the change in chain mobility or the increase of crystalline surface area by cracking of lamellas at the surface layers of PHB films or both.     

Structure and enzymatic degradation of poly(3-hydroxybutyrate) copolymer single crystals with an extracellular PHB depolymerase from Alcaligenes faecalis T1.

Lamellar single crystals of four random copolymers of (R)-3-hydroxybutyrate with different hydroxyalkanoates: poly(3-hydroxybutyrate-co-8 mol%-3-hydroxyvalerate) (P(3HB-co-8%-3HV)), poly(3-hydroxybutyrate-co-10 mol%-4-hydroxybutyrate) (P(3HB-co-10%-4HB)), poly(3-hydroxybutyrate-co-8 mol%-3-hydroxyhexanoate) (P(3HB-co-8%-3HH)) and poly(3-hydroxybutyrate-co-10 mol%-6-hydroxyhexanoate) (P(3HB-co-10%-6HH)), were grown from dilute solutions of chloroform and ethanol. All single crystals have lath-shaped morphology and the second monomer units seem to be excluded from the P(3HB) crystal, on the basis of the electron diffraction diagrams. The enzymatic degradation of P(3HB-co-8%-3HH) and P(3HB-co-10%-6HH) single crystals was investigated with an extracellular PHB depolymerase from Alcaligenes faecalis T1. Adsorption of an extracellular PHB depolymerase, examined using an immuno-gold labelling technique, demonstrated a homogeneous distribution of enzyme molecules with a low concentration on the crystal surfaces. Enzymatic degradation of single crystals progressed from the edges and ends of crystals to yield narrow cracks along their long axes and the small crystal fragments. Lamellar thicknesses of single crystals and molecular weights of copolymer chains remained unchanged during the enzymatic hydrolysis. The above results support the hypothesis that the hydrophobic adsorption of the enzyme contributes to increase the mobility of molecular chains of single crystals and generate the disordered chain-packing regions. The active-site of PHB depolymerase takes place preferentially at the disordered chain-packing regions of crystal edges and ends with endo-exo enzymatic hydrolysis behaviour, termed processive degradation.     

Structural effects of terminal groups on nonenzymatic and enzymatic degradations of end-capped poly(L-lactide)

Poly(L-lactide) (PLLA) with various alkyl ester chain end groups were synthesized by ring-opening polymerization of L-lactide in the presence of zinc alkoxide as a catalyst. The structural effect of chain end groups on the rate of enzymatic and nonenzymatic degradations for amorphous films of PLLA were investigated at 37 degrees C in a Tris-HCl buffer solution (pH 8.6) with proteinase K and at 60 degrees C in a phosphate buffer solution (pH 7.4), respectively. The rate of enzymatic degradation for PLLA films was dependent on the carbon numbers of alkyl ester chain end groups, and the rates of PLLA samples with dodecyl (C12), tridecyl (C13), and tetracocyl (C14) ester end groups were much lower than those of the other samples. The surface morphologies of PLLA films after enzymatic degradation were characterized by scanning electron microscopy. After the enzymatic degradation, non-end-capped PLLA, PLLA with methyl (C1) and hexyl (C6) ester chain ends, were degraded homogeneously by proteinase K and the film surface was very smooth. In contrast, the PLLA with alkyl ester chain ends of carbon numbers over 12 were degraded heterogeneously by the enzyme, and the sponge-like network structure was formed on the film surface. These results indicated that the long alkyl ester groups at the chain ends of PLLA molecules aggregated in the amorphous films and the erosion rate was depressed due to the coverage of the aggregated terminal groups on the film surface. For the nonenzymatic degradation, the molecular weight of non-end-capped PLLA was remarkably decreased with progress of degradation. In contrast, the molecular weight of the end-capped PLLA gradually reduced at the initial stage of degradation and then the rate of degradation was accelerated. The decreases of molecular weight of PLLA by autocatalyzed degradation were retarded by the capping of carboxyl chain ends.