Variables that affect xylitol production from sugarcane bagasse hydrolysate in a zeolite fluidized bed reactor

The operational conditions for xylitol production by fermentation of sugarcane bagasse hydrolysate in a fluidized bed reactor with cells immobilized on zeolite were evaluated. Fermentations were carried out under different conditions of air flowrate (0.0125-0.0375 vvm), zeolite mass (100-200 g), initial pH (4-6), and xylose concentration (40-60 g/L), according to a 2(4) full factorial design. The air flowrate increase resulted in a metabolic deviation from product to biomass formation. On the other hand, the pH increase favored both the xylitol yield (Y(P/S)) and volumetric productivity (Q(P)), and the xylose concentration increase positively influenced the xylitol concentration. The best operational conditions evaluated were based on the use of an air flowrate of 0.0125 vvm, 100 g of zeolite, pH 6, and xylose concentration of 60 g/L. Under these conditions, 38.5 g/L of xylitol were obtained, with a Y(P/S) of 0.72 g/g, Q(P) of 0.32 g/L.h, and cell retention of 25.9%.     

Batch xylitol production from wheat straw hemicellulosic hydrolysate using Candida guilliermondii in a stirred tank reactor

Batch production of xylitol from the hydrolysate of wheat straw hemicellulose using Candida guilliermondii was carried out in a stirred tank reactor (agitation speed of 300 rpm, aeration rate of 0.6 vvm and initial cell concentration of 0.5 g l^–1). After 54 h, xylitol production from 30.5 g xylose l^–1 reached 27.5 g l^–1, resulting in a xylose-to-xylitol bioconversion yield of 0.9 g g^–1 and a productivity of 0.5 g l^–1 h^–1.     

Influence of Medium Composition on Xylitol Bioproduction from Wheat Straw Hemicellulosic Hydrolysate

Summary Xylose-to-xylitol batch bioconversions from wheat straw hemicellulosic hydrolysate were carried out in Erlenmeyer flasks in order to assess the influence of medium composition (hydrolysate concentration, supplementation with ammonium sulphate, calcium chloride and rice bran extract, and initial pH) on xylitol production, productivity and yield. By using the screening design and the response surface methodologies, the statistically significant variables influencing the bioconversion were selected and linear models were fitted to the experimental data. According to the results, the best conditions to perform the bioconversion consisted in using a threefold concentrated hydrolysate supplemented with ammonium sulphate (1.0 g/l) and rice bran extract (5.0 g/l), whose pH was adjusted to 6.0 prior to inoculation. Under these conditions, a xylitol production of 24.17 g/l was observed after 72 h of fermentation, resulting in a productivity of 0.34 g/l h and in a bioconversion yield of 0.49 g/g.     

Xylitol production by <Emphasis Type="Italic">Debaryomyces hansenii</Emphasis> in brewery spent grain dilute-acid hydrolysate: effect of supplementation

A brewery spent-grain hemicellulosic hydrolysate was used for xylitol production by Debaryomyces hansenii. Addition of 6 g yeast extract/l increased the xylitol yield to 0.57 g/g, and productivity to 0.51 g/l h that were, respectively, 1.4 -and 1.8-times higher than the values obtained with non-supplemented hydrolysate. When corn steep liquor was combined with 3 g yeast extract/l, the highest xylitol yield, 0.58 g/g, was obtained with a similar productivity.     

聚氨酯固定化热带假丝酵母发酵木糖醇

固定在多孔聚氨酯载体中的热带假丝酵母(Candida tropicalis), 可有效地利用玉米芯半纤维素水解液生产木糖醇。在摇瓶条件下, 采用分批发酵方式, 确立了适宜的发酵工艺参数为: 接种量7%, 聚氨酯加入量1.0 g/100 mL, 温度30°C, 初始pH值6.0, 分段改变摇床转速进行溶氧调节, 其中0~24 h 为200 r/min; 24 h~46 h为140 r/min。聚氨酯固定化提高了菌体对发酵抑制物的耐受力, 固定化细胞密度高, 发酵性能稳定, 发酵产率和体积生产速率都有所提高。水解液未经脱色与离子交换便可转化成木糖醇, 大幅降低了成本, 显示了良好的应用前景。固定化细胞连续重复进行12批次21 d的发酵, 木糖醇得率平均为67.6%, 体积生产速率平均为1.92 g/(L·h)。     

A study on xylitol production from sugarcane bagasse hemicellulosic hydrolysate by Ca-alginate entrapped cells in a stirred tank reactor

Candida guilliermondii FTI 20037 cells were entrapped in Ca-alginate beads and used for xylitol production from sugarcane bagasse hemicellulosic hydrolysate in a stirred tank reactor (STR). Screening design and response surface methodologies were used to determine adequate cultivation conditions for this fermentation system. Quadratic models were fitted to the experimental data by regression analysis, considering the yield (Y_P/S) and the productivity (Q_P) of the xylose-to-xylitol bioconversion as dependent variables. Using a five-fold concentrated hydrolysate, air flowrate of 1.30 l/min, agitation speed of 300 rpm, initial cell concentration of 1.4 g/l and value 6.0 for the initial pH of the fermentation medium resulted in a xylitol production of 47.5 g/l after 120 h of fermentation, corresponding to a Y_P/S of 0.81 g/g and to a Q_P of 0.40 g/l h.     

Ethanol production from corn cob hydrolysates by <Emphasis Type="Italic">Escherichia coli</Emphasis> KO11

Corn cob hydrolysates, with xylose as the dominant sugar, were fermented to ethanol by recombinant Escherichia coli KO11. When inoculum was grown on LB medium containing glucose, fermentation of the hydrolysate was completed in 163 h and ethanol yield was 0.50 g ethanol/g sugar. When inoculum was grown on xylose, ethanol yield dropped, but fermentation was faster (113 h). Hydrolysate containing 72.0 g/l xylose and supplemented with 20.0 g/l rice bran was readily fermented, producing 36.0 g/l ethanol within 70 h. Maximum ethanol concentrations were not higher for fermentations using higher cellular concentration inocula. A simulation of an industrial process integrating pentose fermentation by E. coli and hexose fermentation by yeast was carried out. At the first step, E. coli fermented the hydrolysate containing 85.0 g/l xylose, producing 40.0 g/l ethanol in 94 h. Baker's yeast and sucrose (150.0 g/l) were then added to the spent fermentation broth. After 8 h of yeast fermentation, the ethanol concentration reached 104.0 g/l. This two-stage fermentation can render the bioconversion of lignocellulose to ethanol more attractive due to increased final alcohol concentration. Journal of Industrial Microbiology & Biotechnology (2002) 29, 124–128 doi:10.1038/sj.jim.7000287 Received 20 February 2002/ Accepted in revised form 04 June 2002     

Xylitol production from high xylose concentration: evaluation of the fermentation in bioreactor under different stirring rates

AIMS: To investigate the production of xylitol by the yeast Candida guilliermondii FTI 20037, in a bioreactor, from rice straw hemicellulosic hydrolysate with a high xylose concentration. METHODS AND RESULTS: Batch fermentation was carried out with rice straw hemicellulosic hydrolysate containing about 85 g xylose l(-1), in a stirred-tank bioreactor at 30 degrees C, under aeration of 1.3 vvm (volume of air per volume of medium per min) and different stirring rates (200, 300 and 500 rev min(-1)). The bioconversion of xylose into xylitol by the yeast depended on the stirring rate, the maximum xylitol yield (YP/S = 0.84 g g(-1)) being achieved at 300 rev min-1, with no need to pretreat the hydrolysate for purification. CONCLUSIONS: To determine the most adequate oxygen transfer rate is fundamental to improving the xylose-to-xylitol bioconversion by C. guilliermondii. SIGNIFICANCE AND IMPACT OF THE STUDY: For the microbial production of xylitol to be economically viable, the initial concentration of xylose in the lignocellulosic hydrolysate should be as high as possible, as with high substrate concentrations it is possible to increase the final product concentration. Nevertheless, there are few reports on the use of high xylose concentrations. Considering a process in bioreactor, from rice straw hemicellulosic hydrolysate, this is an innovator work.     

The influence of pH and dilution rate on continuous production of xylitol from sugarcane bagasse hemicellulosic hydrolysate by C. guilliermondii

Continuous fermentation of sugarcane bagasse hemicellulosic hydrolysate by the yeast Candida guilliermondii FTI 20037 was used for xylitol production from xylose. Experiments were carried out in a reactor with 1.25 l of treated hydrolysate, at 30 °C and 300 rpm. A 2² full-factorial central composite design was employed for experimental study and analysis of the results. A statistical analysis of the results showed that the effects of the pH and dilution rate (D), the interactions between these variables and the second-order effect of D on the xylitol volumetric productivity (Q_p) were significant at a 95% confidence level. The second-order effect of pH was also significant at a 90% confidence level. The k_La effect on the Q_p was not significant. A volumetric productivity of 0.68 g/l h, representing 95.8% of the predicted value (0.72 g/l h), was obtained.     

Fed-batch fermentation to produce oligonucleotides from Kluyveromyces marxianus grown on whey

Oligonucleotides (ON) extracted from yeasts are used as antiviral agents, immunostimulators, and flavour enhancers. Fed-batch fermentation of cheese whey by Kluyveromyces marxianus was carried out to produce high biomass yields to extract ON. K marxianus was grown for 20 h in medium containing 5% (w/v) dehydrated whey, at 30°C (pH 4.5), with agitation (350 rpm), and under aeration (1.0–2.0 vvm). After 20 h, media containing 10–15% (w/v) of dehydrated whey were added at different flow rates (180–230 ml/h). Samples were analyzed at 6–8 h intervals for cell count, lactose consumption, and ethanol production. Maximum production of biomass (28.13 g/l), yield (0.58 g/g), productivity (2.42 g/l per h), and specific growth rate (0.63 1/h) were obtained when medium containing 15% (w/v) of whey was added at 180 ml/h under 2 vvm aeration. Fed-batch fermentation converted 95% of whey lactose into biomass.     

Fermentation of Detoxified Acid-Hydrolyzed Pyrolytic Anhydrosugars into Bioethanol with <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> 2.399

Pyrolysate obtained from the pyrolysis of waste cotton is a source of fermentable sugars that could be fermented into bioethanol fuel and other chemicals via microbial fermentation. However, pyrolysate is a complex mixture of fermentable and non-fermentable substrates causing inhibition of the microbial growth. The aim of this study was to detoxify the hydrolysate and then ferment it into bio-ethanol fuel in shake flasks and fermenter applying yeast strain Saccharomyces cerevisiae 2.399. Pyrolysate was hydrolyzed to glucose with 0.2 M sulfuric acid, neutralized with Ba(OH)₂ followed by treatment with ethyl acetate and activated carbon to remove fermentation inhibitors. The effect of various fermentation parameters such as inoculum concentration, pH and hydrolysate glucose was evaluated in shake flasks for optimum ethanol fermentation. With respect to inoculum concentration, 20% v/v inoculum i.e. 8.0 × 10⁸–1.2 × 10⁹ cells/mL was the optimum level for producing 8.62 ± 0.33 g/L ethanol at 9 h of fermentation with a maximum yield of 0.46 g ethanol/g glucose. The optimum pH for hydrolysate glucose fermentation was found to be 6.0 that produced 8.57 ± 0.66 g/L ethanol. Maximum ethanol concentration, 14.78 g/L was obtained for 4% hydrolysate glucose concentration after 16 h of fermentation. Scale-up studies in stirred fermenter produced much higher productivity (1.32 g/L/h^–1) compared to shake flask fermentation (0.92 g/L/h^–1). The yield of ethanol reached a maximum of 91% and 89% of the theoretical yield of ethanol in shake flasks and fermenter, respectively. The complex of integrated models of development was applied, that has been successfully tested previously for the mathematical analysis of the fermentation processes.     

Enhanced ethanol production via fermentation of rice straw with hydrolysate-adapted Candida tropicalis ATCC 13803

Neutralized hydrolysate and pretreated rice straw obtained from a 2% (w/v) sulfuric acid pretreatment were mixed at 10% (w/v) and subjected to simultaneous saccharification and co-fermentation (SSCF), with cellulase, β-glucosidase, and Candida tropicalis cells at 15 FPU/g-ds, 15 IU/g-ds and 1 × 10⁹ cells/ml, respectively. A 36-h SSCF with adapted cells resulted in YP/S and ethanol volumetric productivity of 0.36 g/g and 0.57 g/l/h, respectively. In addition to ethanol, insignificant amounts of glycerol and xylitol were also produced. Adapted C. tropicalis cells produced nearly 1.6 times more ethanol than non-adapted cells. Ethanol yield (Yp/s), ethanol volumetric productivity and a xylitol concentration of 0.48 g/g, 0.33 g/l/h and 0.89 g/l, respectively, were produced from fermentation of remaining hydrolysate with adapted C. tropicalis cells. The 0.20 g/g ethanol yield and 77% production efficiency from SSCF of pretreated rice straw indicate scale-up potential for the process. This study demonstrated that C. tropicalis produced ethanol and xylitol from a mixed-sugar stream, although cell adaptation affected ethanol and xylitol yields. Scanning electron microscopy indicated agglomeration of cellulose microfibrils and globular deposition of lignin in acid-pretreated rice straw.     

Improvement in xylitol production from sugarcane bagasse hydrolysate achieved by the use of a repeated-batch immobilized cell system

Candida guilliermondii cells were immobilized in Ca-alginate beads and used for xylitol production from concentrated sugarcane bagasse hydrolysate during five successive fermentation batches, each lasting 48 hours. The bioconversion efficiency of 53.2%, the productivity of 0.50 g/l x h and the final xylitol concentration of 23.8 g/l obtained in the first batch increased to 61.5%, 0.59 g/l x h and 28.4 g/l, respectively, in the other four batches (mean values), with variation coefficients of up to 2.3%.     

假丝酵母发酵玉米芯半纤维素水解液生产木糖醇

采用一株驯化过的假丝酵母(Candida sp.)直接发酵经过简单脱毒处理的玉米芯半纤维素水解液生产木糖醇。确定了水解液的最适浓缩倍数在3.0～3.72的范围内。利用正交实验,确定了摇瓶分批发酵工艺条件的最适组合为：摇床转速180r/min,起始C/N为50,起始pH 5.5,接种量5% (体积比)。在此基础上,重点研究了在发酵罐中通气量对酵母发酵玉米芯水解液生产木糖醇的影响。结果表明采用先高后低的分段通气发酵在木糖醇得率方面明显优于恒定通气发酵;其中,在0～24h,3.75 L/min;24～108h,1.25 L/min的分段通气条件下(装液量为2.5L),木糖醇得率(木糖醇/木糖,g/g) 达到0.75 g/g。该结果将有助于建立一种高效的、大规模的利用玉米芯半纤维素水解液发酵生产木糖醇的工艺。     

Enhanced Xylitol Production by Precultivation of Candida guilliermondii Cells in Sugarcane Bagasse Hemicellulosic Hydrolysate

The present work evaluated the key enzymes involved in xylitol production (xylose reductase [XR] and xylitol dehydrogenase [XDH]) and their correlation with xylose, arabinose, and acetic acid assimilation during cultivation of Candida guilliermondii FTI 20037 cells in sugarcane bagasse hemicellulosic hydrolysate. For this purpose, inocula previously grown either in sugarcane bagasse hemicellulosic hydrolysate (SBHH) or in semidefined medium (xylose as a substrate) were used. The highest xylose/acetic acid consumption ratio (1.78) and the lowest arabinose consumption (13%) were attained in the fermentation using inoculum previously grown in semidefined medium (without acetic acid and arabinose). In this case, the highest values of XR (1.37 U mg prot⁻¹) and XDH (0.91 U mg prot⁻¹) activities were observed. The highest xylitol yield (∼0.55 g g⁻¹) and byproducts (ethanol and glycerol) formation were not influenced by inoculum procedure. However, the cell previously grown in the hydrolysate was effective in enhancing xylitol production by keeping the XR enzyme activity at high levels (around 0.99 U·mg_prot⁻¹), reducing the XDH activity (34.0%) and increasing xylitol volumetric productivity (26.5%) with respect to the inoculum cultivated in semidefined medium. Therefore, inoculum adaptation to SBHH was shown to be an important strategy to improve xylitol productivity.     

Statistical optimization of culture conditions for 1,3-propanediol by Klebsiella pneumoniae AC 15 via central composite design

A central composite design was used to study the effect of glycerol, rate of stirring, air aeration and pH on the synthesis of 1,3-propanediol (1,3-PD) by Klebsiella pneumoniae AC 15. Among the four variables, glycerol and rate of stirring significantly affected 1,3-PD productivity, whereas air aeration and pH were not effective. A quadratic polynomial equation was obtained for 1,3-PD productivity by multiple regression analysis using response surface methodology. The validation experimental confirmed with the predicted model. The optimum combinations for 1,3-PD productivity was glycerol, rate of stirring, air aeration, and pH of 50 g/l, 318 rpm, 0.6 vvm, 6.48, respectively. The subsequent fed batch experiments produced 1,3-PD of 70 g/l at a fermentation of 30 h.     

Use of immobilized Candida cells on xylitol production from sugarcane bagasse

In this study we used the yeast Candida guilliermondii FTI 20037 immobilized by entrapment in Ca-alginate beads (2.5-3 mm diameter) for xylitol production from concentrated sugarcane bagasse hemicellulosic hydrolysate in a repeated batch system. The fermentation runs were carried out in 125- and 250-ml Erlenmeyer flasks placed in an orbital shaker at 30 degrees C and 200 rpm during 72 h, keeping constant the proportion between work volume and flask total volume. According to the results, cell viability was substantially high (98%) in all fermentative cycles. The values of parameters xylitol yield and volumetric productivity increased significantly with the reutilization of the immobilized biocatalysts. The highest values of xylitol final concentration (11.05 g/l), yield factor (0.47 g/g) and volumetric productivity (0.22 g/lh) were obtained in 250-ml Erlenmeyer flasks containing 80 ml of medium plus 20 ml of immobilized biocatalysts. The support used in this study (Ca-alginate) presented stability in the experimental conditions used. The results show that the use of immobilized cells is a promising approach for increasing the xylitol production rates.     

Levan production by Zymomonas mobilis cells. Attached to plaited spheres

In this work, an immobilization method for polymer-levan production by a non-flocculating Z mobilis culture was developed. The extent of cell attachment to the stainless steel wire surface, culture growth and product synthesis were described. It was established that during short-term passive immobilization of non-flocculation Z mobilis cells on a stainless steel wire surface, sufficient amounts of biomass for proper levan and ethano fermentation could not be obtained. Adherence of cells was improved by pressing the paste-like biomass within stainless steel spheres knitted from wire with subsequent dehydration. Biomass fixed in metal spheres was used for repeated batch fermentation of levan. The activation period of cells within wire spheres (WS) was 48 h in duration. During this time, cell growth stabilized at production levels of ethanol and levan of Q_eth = 1.238 g/l × h and q_eth = 0.47 g/l × h; Q_eth = 0.526 g/l × h and q_eth = 0.20 g/l × h. Five stable fermentation cycles were realized using one wire sphere inoculum, and maintaining a stable ratio of 2.4 of biomass suspended in the medium to biomass fixed in the sphere. Using fixed Z mobilis biomass in the WS, the total amount of inoculum could be reduced for batch fermentation. Large plaited wire spheres with biomass may have potential in fermentation in viscous systems, including levan production.     

Effect of inoculum level on xylitol production from rice straw hemicellulose hydrolysate byCandida guilliermondii

The effect of inoculum level on xylitol production byCandida guilliermondii was evaluated in a rice straw hemicellulose hydrolysate. High initial cell density did not show a positive effect in this bioconversion since increasing the initial cell density from 0.67 g L^–1 to 2.41 g L^–1 decreased both the rate of xylose utilization and xylitol accumulation. The maximum xylitol yield (0.71 g g^–1) and volumetric productivity (0.56 g L^–1 h^–1) were reached with an inoculum level of 0.9 g L^–1. These results show that under appropriate inoculum conditions rice straw hemicellulose hydrolysate can be converted into xylitol by the yeastC. guilliermondii with efficiency values as high as 77% of the theoretical maximum.     

Sugar Beet Juice Fermentation by Zymomonas mobilis Attached to Stainless Steel Wire Spheres

The fermentation of sugar beet juice as well as juice syrup medium by Zymomonas mobilis inoculum attached to stainless steel wire spheres was investigated. A semi‐synthetic sucrose medium enriched with mineral salts and yeast extract was used as the control. It was established that raw sugar beet juice ensured good Zymomonas mobilis culture growth and slightly decreased ethanol synthesis applying both flame‐burned and TiCl₄‐treated wire spheres as carriers (Q_x = 0.05—0.06 g/l × h; Q_eth = 1.02—1.22 g/l × h). High ethanol yield was also observed in juice medium (Y = 0.45‐0.46 g/g), however, levan synthesis with this medium decreased. The application of juice syrup brought about less growth effect and ethanol synthesis as compared to juice medium. The use of semi‐synthetic sucrose medium resulted in high levan production (Q_lev = 0.6—0.7 g/l × h), however, reduced ethanol production by 40%. In conclusion, sugar beet juice or syrup is recommendable for the preparation of Zymomonas mobilis inoculum. The levan production stage has to be realized using an optimized semi‐synthetic sucrose medium. The installed wire spheres filled with inocula provided the possibility for a repeated batch fermentation process, which could be recommended for both juice and semi‐synthetic sucrose medium fermentation.