Pulmonary surfactant proteins SP-B and SP-C in spread monolayers at the air-water interface: II. Monolayers of pulmonary surfactant protein SP-C and phospholipids.

The interaction of the hydrophobic pulmonary surfactant protein SP-C with dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG) and DPPC:DPPG (7:3, mol:mol) in spread monolayers at the air-water interface has been studied. At low concentrations of SP-C (about 0.5 mol% or 3 weight%protein) the protein-lipid films collapsed at surface pressures of about 70 mN.m-1, comparable to those of the lipids alone. At initial protein concentrations higher than 0.8 mol%, or 4 weight%, the isotherms displayed kinks at surface pressures of about 50 mN.m-1 in addition to the collapse plateaux at the higher pressures. The presence of less than 6 mol%, or 27 weight%, of SP-C in the protein-lipid monolayers gave a positive deviation from ideal behavior of the mean areas in the films. Analyses of the mean areas in the protein-lipid films as functions of the monolayer composition and surface pressure showed that SP-C, associated with some phospholipid (about 8-10 lipid molecules per molecule of SP-C), was squeezed out from the monolayers at surface pressures of about 55 mN.m-1. The results suggest a potential role for SP-C to modify the composition of the monolayer at the air-water interface in the alveoli.     

Enzyme-catalyzed oxidation of cholesterol in mixed phospholipid monolayers reveals the stoichiometry at which free cholesterol clusters disappear.

In this study, we have used cholesterol oxidase as a probe to study cholesterol/phospholipid interactions in mixed monolayers at the air/water interface. Mixed monolayers, containing a single phospholipid class and cholesterol at differing cholesterol/phospholipid molar ratios, were exposed to cholesterol oxidase at a lateral surface pressure of 20 mN/m (at 22 degrees C). At equimolar ratios of cholesterol to phospholipid, the average rate of cholesterol oxidation was fastest in unsaturated phosphatidylcholine mixed monolayers (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine and egg yolk phosphatidylcholine), intermediate in 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, and slowest in sphingomyelin monolayers (egg yolk or bovine brain sphingomyelin). The average oxidation rate in mixed monolayers was not exclusively a function of monolayer packing density, since egg yolk and bovine brain sphingomyelin mixed monolayers occupied similar mean molecular areas even though the measured average oxidation rate was different with these two phospholipids. This suggests that the phospholipid acyl chain composition influenced the oxidation rate. The importance of the phospholipid acyl chain length on influencing the average oxidation rate was further examined in defined phosphatidylcholine mixed monolayers. The average oxidation rate decreased linearly with increasing acyl chain lengths (from di-8:0 to di-18:0). When the average oxidation rate was examined as a function of the cholesterol to phospholipid (C/PL) molar ratio in the monolayer, the otherwise linear function displayed a clear break at a 1:1 stoichiometry with phosphatidylcholine mixed monolayers, and at a 2:1 C/PL stoichiometry with sphingomyelin mixed monolayers.(ABSTRACT TRUNCATED AT 250 WORDS)     

Dermaseptin 01 as antimicrobial peptide with rich biotechnological potential: study of peptide interaction with membranes containing Leishmania amazonensis lipid‐rich extract and membrane models

This article addresses the interactions of the synthetic antimicrobial peptide dermaseptin 01 (GLWSTIKQKGKEAAIAAA‐ KAAGQAALGAL‐NH₂, DS 01) with phospholipid (PL) monolayers comprising (i) a lipid‐rich extract of Leishmania amazonensis (LRE‐La), (ii) zwitterionic PL (dipalmitoylphosphatidylcholine, DPPC), and (iii) negatively charged PL (dipalmitoylphosphatidylglycerol, DPPG). The degree of interaction of DS 01 with the different biomembrane models was quantified from equilibrium and dynamic liquid‐air interface parameters. At low peptide concentrations, interactions between DS 01 and zwitterionic PL, as well as with the LRE‐La monolayers were very weak, whereas with negatively charged PLs the interactions were stronger. For peptide concentrations above 1 µg/ml, a considerable expansion of negatively charged monolayers occurred. In the case of DPPC, it was possible to return to the original lipid area in the condensed phase, suggesting that the peptide was expelled from the monolayer. However, in the case of DPPG, the average area per lipid molecule in the presence of DS 01 was higher than pure PLs even at high surface pressures, suggesting that at least part of DS 01 remained incorporated in the monolayer. For the LRE‐La monolayers, DS 01 also remained in the monolayer. This is the first report on the antiparasitic activity of AMPs using Langmuir monolayers of a natural lipid extract from L. amazonensis. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Molecular packing of high-density and low-density lipoprotein surface lipids and apolipoprotein A-I binding

The surface pressure (pi)-molecular area (A) isotherms for monolayers of human high-density lipoprotein (HDL3) and low-density lipoprotein (LDL) phospholipids and of mixed monolayers of these phospholipids with cholesterol spread at the air-water interface were used to deduce the likely molecular packing at the surfaces of HDL3 and LDL particles. LDL phospholipids form more condensed monolayers than HDL3 phospholipids; for example, the molecular areas of LDL and HDL3 phospholipids at pi = 10 dyn/cm are 88 and 75 A2/molecule, respectively. The closer packing in the LDL phospholipids monolayer can be attributed to the higher contents of saturated phosphatidylcholines and sphingomyelin relative to HDL3. Cholesterol condenses both HDL3 and LDL phospholipid monolayers but has a greater condensing effect on the LDL phospholipid monolayer. The pi-A isotherms for mixed monolayer of HDL3 phospholipid/cholesterol and LDL phospholipid/cholesterol at stoichiometries similar to those at the surfaces of lipoprotein particles suggest that the monolayer at the surface of the LDL particle is significantly more condensed than that at the surface of the HDL3 particle. The closer lateral packing in LDL is due to at least three factors: (1) the difference in phospholipid composition; (2) the higher unesterified cholesterol content in LDL; and (3) a stronger interaction between cholesterol and LDL phospholipids relative to HDL3 phospholipids. The influence of lipid molecular packing on the affinity of human apolipoprotein A-I (apo A-I) for HDL3 and LDL surface lipids was evaluated by monitoring the adsorption of 14C-methylated apo A-I to monolayers of these lipids spread at various initial surface pressures (pi i).(ABSTRACT TRUNCATED AT 250 WORDS)     

Structural alterations of phospholipid film domain morphology induced by cholesterol

Structures of the monolayer films of dipalmitoylphosphatidylcholine (DPPC) mixed with different amounts of cholesterol were studied at air-water interface using surface pressure-area measurements, epifluorescence microscopy and atomic force microscopy (AFM). Pure DPPC, cholesterol or DPPC-cholesterol mixtures were dissolved in organic solvents with a small amount of fluorescently labeled phospholipid probe (NBD-PC) and spread onto the air-water interface. Surface pressure-area isotherms and epifluorescence microscopy of such films at the air-water interface suggested that DPPC undergoes a gas to fluid to condensed phase transition, while cholesterol undergoes a gas to solid-like transition. A shift of the surface pressure-area curve to lower area per molecule was observed when cholesterol was mixed with DPPC. Epifluorescence microscopy showed the formation of spiral shaped domains for mixed monolayers. Increase in cholesterol content abolished domain characteristics possibly due to fluidizing property of cholesterol. AFM measurements of monolayers, transferred onto freshly cleaved mica by Langmuir-Blodgett technique, revealed the alterations caused by cholesterol on the gel and fluid domains of such films. AFM measurements re-established similar trend in domain characteristics as evidenced in epifluorescence microscopy.     

Interactions of phospholipid monolayers with carbohydrates

Surface pressure studies of phospholipid monomolecular films of dimyristoylphosphatidylcholine (DMPC) and dipalmitoylphosphatidylcholine (DPPC) formed at an air/water interface have been made and the effects on the films studied when various carbohydrates are present in the subphase. The results obtained show that at a given temperature, the area per molecule of DPPC increases with increasing concentration of the carbohydrate in the subphase. The carbohydrate which has the greatest expanding effect on the phospholipid monolayer is glycerol, followed in turn by trehalose, sucrose, glucose, raffinose, and inositol. The mechanism of monolayer expansion by glycerol is different from that observed in other carbohydrates, as the following experiments demonstrate. Below the phase transition temperature of DPPC, the area per molecule of DPPC at a pressure of 12.5 dyn/cm is the same with and without glycerol in the subphase. However, when the monolayer is heated to a temperature above the phase transition temperature for DPPC, the area/molecule on glycerol is considerably greater than the area/molecule on water at the same surface pressure. Cooling the monolayer back to the lower temperature produces an area/molecule of DPPC which is identical on both water and glycerol subphases. Glycerol therefore has no effect on the low-temperature (condensed) monolayers but causes expansion of the high-temperature (expanded) monolayers. By contrast with glycerol, both trehalose and sucrose interact with the DPPC monolayer producing an increased area/molecule over that observed on water, both with low-temperature (condensed) monolayers and with the high-temperature (expanded) monolayers. The efficiency of these carbohydrates at expanding the monolayer films (with the exception of glycerol) shows a strong correlation with their ability to stabilize membrane structure and function at low water contents.     

The interaction of meso-tetraphenylporphyrin with phospholipid monolayers

In this article, we investigate the interaction of meso-tetraphenylporphyrin (TPP) with phospholipid monolayers. Pure TPP molecules form films at the air-water interface with large extension of aggregation, which is confirmed by UV-vis spectra of transferred monolayers. For mixed films of TPP with dipalmitoyl phosphatidyl choline (DPPC) or dipalmitoyl phosphatidyl glycerol (DPPG), on the other hand, aggregation is only significant at high surface pressures or high concentrations of TPP (above 0.1 molar ratio). This was observed via Brewster angle microscopy (BAM) for the Langmuir films and UV-vis spectroscopy for transferred layers onto solid substrates. TPP indeed causes the DPPC and DPPG monolayers to expand, especially at the liquid-expanded to liquid-condensed phase transition for DPPC. The effects from TPP cannot be explained using purely geometrical considerations, as the area per TPP molecule obtained from the isotherms is at least twice the expected value from the literature. Therefore, interaction between TPP and DPPC or DPPG should be cooperative, so that more phospholipid molecules are affected than just the first neighbors to a TPP molecule.     

Pulmonary surfactant proteins SP-B and SP-C in spread monolayers at the air-water interface: I. Monolayers of pulmonary surfactant protein SP-B and phospholipids.

The effects of pulmonary surfactant protein SP-B on the properties of monolayers of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG), and a mixture of DPPC:DPPG (7:3, mol:mol) were studied using spread films at the air-water interface. The addition of SP-B to the phospholipid monolayers gave positive deviations from additivity of the mean areas in the films. At low protein concentrations (less than 45% amino acid residues which corresponds to 0.5 mol% or 10 weight% SP-B) monolayers of SP-B/DPPC, SP-B/DPPG and SP-B/(DPPC:DPPG) collapsed at surface pressures of about 70 mN.m-1, comparable to those of the lipids alone. At higher concentrations of SP-B in the protein-lipid monolayers, kink points appeared in the isotherms at about 40-45 mN.m-1, implying possible exclusion of material from the films, hence, changes in the original monolayer compositions. Calculated analyses of the monolayer compositions as a function of surface pressure indicated that nearly pure SP-B, associated with small amounts of phospholipid (2-3 lipid molecules per SP-B dimer), was lost from SP-B/DPPC, SP-B/DPPG, and SP-B/(DPPC:DPPG) films at surface pressures higher than 40-45 mN.m-1. The results are consistent with a low effectiveness of SP-B in removing saturated phospholipids, DPPC or DPPG, from the spread SP-B/phospholipid films.     

Interactions of antimicrobial peptide from C-terminus of myotoxin II with phospholipid mono- and bilayers

Comparative studies of the effect of a short synthetic cationic peptide, pEM-2 (KKWRWWLKALAKK), derived from the C-terminus of myotoxin II from the venom of the snake Bothrops asper on phospholipid mono- and bilayers were performed by means of Langmuir Blodgett (LB) monolayer technique, atomic force microscopy and calcein leakage assay. Phospholipid mono- and bilayers composed of single zwitterionic or anionic phospholipids as well as lipid mixtures mimicking bacterial cell membrane were used. LB measurements indicate that the peptide binds to both anionic and zwitterionic phospholipid monolayers at low surface pressure but only to anionic at high surface pressure. Preferential interaction of the peptide with anionic phospholipid monolayer is also supported by a more pronounced change of the monolayer pressure/area isotherms induced by the peptide. AFM imaging reveals the presence of nanoscale aggregates in lipid/peptide mixture monolayers. At the same time, calcein leakage experiment demonstrated that pEM-2 induces stronger disruption of zwitterionic than anionic bilayers. Results of the study indicate that electrostatic interactions play a significant role in the initial recognition and binding of pEM-2 to the cell membrane. However, membrane rupturing activity of the peptide depends on interactions other than simple ionic attraction.     

Interaction of lipid vesicles with monomolecular layers containing lung surfactant proteins SP-B or SP-C

Pulmonary surfactant contains two families of hydrophobic proteins, SP-B and SP-C. Both proteins are thought to promote the formation of the phospholipid monolayer at the air-fluid interface of the lung. The Wilhelmy plate method was used to study the involvement of SP-B and SP-C in the formation of phospholipid monolayers. The proteins were either present in the phospholipid vesicles which were injected into the subphase or included in a preformed phospholipid monolayer. In agreement with earlier investigators, we found that SP-B and SP-C, present in phospholipid vesicles, were able to induce the formation of a monolayer, as became apparent by an increase in surface pressure. However, when the proteins were present in a preformed phospholipid monolayer (20 mN/m) at similar lipid to protein ratios, the rate of surface pressure increase after injection of pure phospholipid vesicles into the subphase at similar vesicle concentrations was 10 times higher. The process of phospholipid insertion from phospholipid vesicles into the protein-containing monolayers was dependent on (1) the presence of (divalent) cations, (2) the phospholipid concentration in the subphase, (3) the size of the phospholipid vesicles, (4) the protein concentration in the preformed monolayer, and (5) the initial surface pressure at which the monolayers were formed. Both in vesicles and in preformed monolayers, SP-C was less active than SP-B in promoting the formation of a phospholipid monolayer. The use of preformed monolayers containing controlled protein concentrations may allow more detailed studies on the mechanism by which the proteins enhance phospholipid monolayer formation from vesicles.     

Fabrication of Langmuir-Blodgett film of a fullerene derivative with a cyclic peptide as an anchor

A novel cyclic octapeptide carrying a fullerene unit and poly(ethylene glycol) at the side chain (cyclo8-C 60 + PEG) was synthesized, and its monolayer formation at the air/water interface and on a substrate was studied. Surface pressure-area per molecule isotherms indicated that cyclo8-C 60 + PEG formed a stable monolayer at the air/water interface. The cyclo8-C 60 + PEG monolayers prepared from various spreading volumes (i.e., from various initial areas per molecule) overlapped nicely on a single curve, suggesting that the molecules were uniformly dispersed on the surface without aggregation of the fullerene units. The uniform dispersibility is due to the scaffold effect of the cyclic peptide unit to keep the fullerene units away from each other. The formed monolayer could be quantitatively transferred onto a solid substrate. UV-vis absorption spectroscopy of the Langmuir-Blodgett (LB) monolayer showed that the electronic structure of the fullerene unit was not affected by the formation of the monolayer. Cyclic voltammetry of the LB monolayer in an aqueous solution containing redox species indicated that the LB monolayer was densely packed. Furthermore, reversible redox peaks attributed to the one-electron reduction of the fullerene unit were observed, showing that the redox property of the fullerene unit was also retained in the monolayer. It is thus concluded that the cyclic peptide is a good candidate as a scaffold for stable monolayer formation at the air/water interface and for intact immobilization of the fullerene moiety onto a substrate.     

Interaction of differently oriented lipids in monolayer: mixed monolayers of 16-(9-anthroyloxy)palmitic acid with phosphatidylcholine and cholesterol

16-(9-Anthroyloxy)palmitic acid (16-AP) is a bifunctional molecule with carboxyl and 9-anthroyloxy groups attached at both ends of the hydrocarbon chain. At the air-water interface, in a monolayer, the 16-AP molecule has horizontal and vertical orientations, depending on the surface pressure of the monolayer. The miscibilities of 16-AP with dimyristoylphosphatidylcholine (DMPC), cholesterol (CH), and fatty acids in mixed monolayers were evaluated in investigations of monolayer phase transitions. Lipid molecules with flexible hydrocarbon chains, i.e., DMPC and fatty acids, formed homogeneous mixed monolayers with horizontally oriented 16-AP. On the other hand, the rigid molecule, CH, could not accommodate the horizontally oriented 16-AP in a monolayer, and there was a phase separation from 16-AP. In biological and reconstituted membranes, preferential binding of phospholipid to the integral protein and exclusion of cholesterol in close vicinity of the membrane protein have been recognized. On the basis of this work, it can be expected that flexible lipids readily accommodate the rough hydrophobic surface of integral proteins and stabilize the structure of the protein, while rigid lipids such as cholesterol are removed from the immediate environment of the membrane protein, if the protein does not interact specifically with the rigid lipids.     

Modulation of tetracycline-phospholipid interactions by tuning of pH at the water-air interface

This paper is part of a systematic study of the interactions of tetracycline antibiotics with phospholipid monolayers at the water-air interface. Tetracyclines are widespread antibiotics that undergo a series of protonation equilibria in solution, depending on the pH. The surface activity of tetracyclines was determined by means of surface tension measurements for three different systems, i.e. water, TRIS and McIlvaine-EDTA buffer. Surface pressure-molecular area and surface potential-molecular area isotherms were acquired for dipalmitoylphosphatidic acid monolayers on TRIS buffer (pH=7.0) and McIlvaine-EDTA buffer (pH=4.0) solution as a function of tetracycline concentration in the subphase. Comparative analysis of surface potential data, with the molecular dipole moment of tetracycline obtained from semiempirical calculations, provided information on the orientation of tetracycline at the interface. Surface pressure measurements as a function of monolayer compression were described, applying either a continuous partition model or Langmuir adsorption isotherms. The results obtained in the case of buffer solutions were compared to those obtained for tetracycline in water subphases. The analysis of the results indicated that electrostatic interactions dictate the migration of tetracycline to the monolayer interface. Penetration of the molecule to the lipophilic portion of the monolayer was unlikely, especially at high surface pressures. The results showed that stronger interactions are established between the zwitterionic tetracycline and the deprotonated phosphatidic group in TRIS buffer solution; in this case, tetracycline binds at the monolayer interface following a Langmuir type adsorption. In the case of water, where the monodeprotonated acid and the tetracycline zwitterions are the only species involved, the data can be described by continuous partition of tetracycline between interfacial and bulk phases. The same holds for McIlvaine-EDTA buffer subphases, although the high concentrations of citrate ions in this buffer competitively interfere with tetracycline association at the monolayer interface.     

Enhanced Ordering in Monolayers Containing Glycosphingolipids: Impact of Carbohydrate Structure

The influence of carbohydrate structure on the ordering of glycosphingolipids (GSLs) and surrounding phospholipids was investigated in monolayers at the air-water interface. Binary mixtures composed of GSLs, chosen to span a range of carbohydrate complexity, and zwitterionic dipalmitoylphosphatidylcholine phospholipid, were studied. X-ray reflectivity was used to measure the out-of-plane structure of the monolayers and characterize the extension and conformation of the GSL carbohydrates. Using synchrotron grazing incidence x-ray diffraction, the in-plane packing of the lipid acyl chains and the area per molecule within ordered domains were characterized at different mole ratios of the two components. Our findings indicate that GSL-containing mixtures, regardless of the carbohydrate size, enhance the ordering of the surrounding lipids, resulting in a larger fraction of ordered phase of the monolayer and greater dimensions of the ordered domains. Reduction of the averaged area per molecule within the ordered domains was also observed but only in the cases where there was a size mismatch between the phospholipid headgroups and GSL components, suggesting that the condensation mechanism involves the relief of steric interactions between headgroups in mixtures.     

Packing of ganglioside-phospholipid monolayers: an x-ray diffraction and reflectivity study

Using synchrotron grazing-incidence x-ray diffraction (GIXD) and reflectivity, the in-plane and out-of-plane structure of mixed ganglioside-phospholipid monolayers was investigated at the air-water interface. Mixed monolayers of 0, 5, 10, 20, and 100 mol% ganglioside GM(1) and the phospholipid dipalmitoylphosphatidylethanolamine (DPPE) were studied in the solid phase at 23 degrees C and a surface pressure of 45 mN/m. At these concentrations and conditions the two components do not phase-separate and no evidence for domain formation was observed. X-ray scattering measurements reveal that GM(1) is accommodated within the host DPPE monolayer and does not distort the hexagonal in-plane unit cell or out-of-plane two-dimensional (2-D) packing compared with a pure DPPE monolayer. The oligosaccharide headgroups were found to extend normally from the monolayer surface, and the incorporation of these glycolipids into DPPE monolayers did not affect hydrocarbon tail packing (fluidization or condensation of the hydrocarbon region). This is in contrast to previous investigations of lipopolymer-lipid mixtures, where the packing structure of phospholipid monolayers was greatly altered by the inclusion of lipids bearing hydrophilic polymer groups. Indeed, the lack of packing disruptions by the oligosaccharide groups indicates that protein-GM(1) interactions, including binding, insertion, chain fluidization, and domain formation (lipid rafts), can be studied in 2-D monolayers using scattering techniques.     

Cooperativity of phospholipid reorganization upon interaction of dipyridamole with surface monolayers on water

Results from various surface sensitive characterization techniques suggest a model for the interaction of the piperidinopyrimidine dipyridamole (DIP)--known as a vasodilator and inhibitor of P-glycoprotein associated multidrug resistance of tumor cells--with phospholipid monolayers in which the drug is peripherally associated with the membrane, binding (up to) five phospholipids at a time. These multiple interactions are responsible for a very strong association of the drug with the lipid monolayer even at exceedingly low concentrations (approximately 0.2 mol%). Electrostatic interactions and hydrogen bonding are likely involved in the binding of DIP to DPPC. Cooperative effects among the lipids are invoked to explain the macroscopically measurable changes of lipid monolayer properties even when only one out of 100 DPPC molecules is directly associated with a DIP molecule. A reversal of the observed changes upon drug association with the membrane as the DIP concentration surpasses a threshold concentration (c(crit)approximately 0.5 mol%) may be explained by cooperativity in a different context, the self-aggregation of drug molecules. With its implications for the interaction of DIP with phospholipid films, this work provides a first approach to the explanation of the high sensitivity of cell membranes to piperidinopyrimidine drugs on a molecular level.     

Thyroid Hormones Affect the Membrane Dipolar Organization. Is It a General Event in Their Non-genomic Action?

The surface balance technique was employed to study the interactions of 3,5,3',5' tetraiodo L-thyronine, 3,5,3' triiodo L-thyronine, and 3,5-diiodothyronine with monomolecular phospholipid monolayers spread at the air-water interface. With this technique the insertion of thyroid hormones into egg yolk phosphatidylcholine was investigated. An increase of surface pressure and a substantial decrement in surface potential were observed after the injection of these hormones beneath a phospholipid monolayer. The negative dipole contribution upon hormone interaction opposes the well-known positive contribution of phospholipids. These effects correlated with iodo content of the thyroid molecule analogues 3,5,3',5' tetraiodo L-thyronine >3,5,3' triiodo L-thyronine >3,5-diiodothyronine. To our knowledge, these observations suggest a new and surprising effect of thyroid hormones on the regulation of transmembrane dipolar organization.     

Interaction of α-thrombin and prethrombin 2, with phosphatidylserine-containing monolayers

Prothrombin activation complex is located at a phospholipid surface on activated platelets. To see whether the thrombin domain of the molecule plays a role in the interaction with lipids, we investigated the direct interaction of human α-thrombin and its precursor prethrombin 2 with phospholipid monolayers of varous compositions (PS/PC). Adsorption of the labeled proteins was determined by surface radioactive measurements. Penetrations of the proteins in the lipid layer was inferred from capacitance variation of the monolayer measured by a palarography. Disulfide bridges reduced at the electrode were determined by cycle voltametry.In all the cases studied, although in different manners thrombin was found both to adsorb and penetrate the lipid layer, whereas prethrombin 2 did not penetrate pure phosphatidylcholine (PC). In the case of thrombin but not of prethrombin 2, penetration is accompanied by S-S reduction which is maximum at 10 per cent of phosphatidylserine (PS). This indicate a different orientation for prethrombin 2 and thrombin in the lipid layer. This observation might be of importance for the comprehension of the architecture of the prothrombin might be of for the regulation of thrombin formation within the complex.     

Cholesterol in condensed and fluid phosphatidylcholine monolayers studied by epifluorescence microscopy

Epifluorescence microscopy was used to investigate the effect of cholesterol on monolayers of dipalmitoylphosphatidylcholine (DPPC) and 1 -palmitoyl-2-oleoyl phosphatidylcholine (POPC) at 21 +/- 2 degrees C using 1 mol% 1-palmitoyl-2-[12-[(7-nitro-2-1, 3-benzoxadizole-4-yl)amino]dodecanoyl]phosphatidylcholine (NBD-PC) as a fluorophore. Up to 30 mol% cholesterol in DPPC monolayers decreased the amounts of probe-excluded liquid-condensed (LC) phase at all surface pressures (pi), but did not effect the monolayers of POPC, which remained in the liquid-expanded (LE) phase at all pi. At low pi (2-5 mN/m), 10 mol% or more cholesterol in DPPC induced a lateral phase separation into dark probe-excluded and light probe-rich regions. In POPC monolayers, phase separation was observed at low pi when > or =40 mol% or more cholesterol was present. The lateral phase separation observed with increased cholesterol concentrations in these lipid monolayers may be a result of the segregation of cholesterol-rich domains in ordered fluid phases that preferentially exclude the fluorescent probe. With increasing pi, monolayers could be transformed from a heterogeneous dark and light appearance into a homogeneous fluorescent phase, in a manner that was dependent on pi and cholesterol content. The packing density of the acyl chains may be a determinant in the interaction of cholesterol with phosphatidylcholine (PC), because the transformations in monolayer surface texture were observed in phospholipid (PL)/sterol mixtures having similar molecular areas. At high pi (41 mN/m), elongated crystal-like structures were observed in monolayers containing 80-100 mol% cholesterol, and these structures grew in size when the monolayers were compressed after collapse. This observation could be associated with the segregation and crystallization of cholesterol after monolayer collapse.     

Divalent cation-induced interaction of phospholipid vesicle and monolayer membranes

The effects of phospholipid vesicles and divalent cations in the subphase solution on the surface tension of phospholipid monolayer membranes were studied in order to elucidate the nature of the divalent cation-induced vesicle-membrane interaction. The monolayers were formed at the air/water interface. Various concentrations of unilamellar phospholipid (phosphatidylserine, phosphatidylcholine and their mixtures) vesicles and divalent cations (Mg²⁺, Ca²⁺, Mn²⁺, etc.) were introduced into the subphase solution of the monolayers. The changes of surface tension of monolayers were measured by the Wilhelmy plate (Teflon) method with respect to divalent ion concentrations and time.When a monolayer of phosphatidylserine and vesicles of phosphatidylserine/phosphatidylcholine (1 : 1) were used, there were critical concentrations of divalent cations to produce a large reduction in surface tension of the monolayer. These concentrations were 16 mM for Mg²⁺, 7 mM for Sr²⁺, 6 mM for Ca²⁺, 3.5 mM for Ba²⁺ and 1.8 mM for Mn²⁺. On the other hand, for a phosphatidylcholine monolayer and phosphatidylcholine vesicles, there was no change in surface tension of the monolayer up to 25 mM of any divalent ion used. When a phosphatidylserine monolayer and phosphatidylcholine vesicles were used, the order of divalent ions to effect the large reduction of surface tension was Mn²⁺ > Ca²⁺ > Mg²⁺ and their critical concentrations were in between the former two cases. The threshold concentrations also depended upon vesicle concentrations as well as the area/molecule of monolayers. For phosphatidylserine monolayers and phosphatidylserine/phosphatidylcholine (1 : 1) vesicles, above the critical concentrations of Mn²⁺ and Ca²⁺, the surface tension decreased to a value close to the equilibrium pressure of the monolayers within 0.5 h.This decrease in surface tension of the monolayers is interpreted partly as the consequence of fusion of the vesicles with the monolayer membranes. The