Hydration of 3-cyanopyridine to nicotinamide by crude extract nitrile hydratase

Summary The kinetic and stability characteristics of crude extract nitrile hydratase fromBrevibacterium R-312 were studied for the hydration of 3-cyanopyridine to nicotinamide. The enzyme was substrate and product inhibited and had the following kinetic constants:K _m =28 mM;K _p =36 mM;K _s =155 mM;V _m =5.8 mol/min/mg protein (25°C). Itsmaximum temperature and pH (phosphate buffer) were 35°C and 8.0, respectively and it had half-lives of 50 days, 10 days and 1 day at 4°C, 10°C and 25°C, respectively. The crude extract also exhibited amidase activity on nicotinamide, but it became significant only at nicotinamide concentrations greater than 300 mM. Mathematical models for batch and fed-batch hydrations were developed to account for substrate and product inhibitions and for enzyme decay. They predicted to within 10% experimental results for initial substrate and final product concentrations up to 300 mM; the accuracies decreased at higher concentrations primarily because of the relatively rapid hydrolysis of nicotinamide.     

Cobalt-dependent transcription of the nitrile hydratase gene in Rhodococcus rhodochrous M8

Abstract The effects of cobalt ions on the activities of Rhodococcus rhodochrous M8 enzymes for nitrile utilization, nitrile hydratase and amidase, were investigated. In contrast to amidase, synthesis of nitrile hydratase and its activity required cobalt ions in the growth medium. Northern blot analysis showed that in the presence of cobalt ions, the level of mRNA for nitrile hydratase genes was several times higher than that under cobalt-limited conditions. It was assumed that the low nitrile hydratase activity in cells grown in the absence of cobalt ions is connected either with the weak expression of nitrile hydratase genes or with the rapid degradation of nitrile hydratase mRNA.     

Biotransformation of nitriles to amides using soluble and immobilized nitrile hydratase from Rhodococcus erythropolis A4

A semi-purified nitrile hydratase from Rhodococcus erythropolis A4 was applied to biotransformations of 3-oxonitriles 1a–4a, 3-hydroxy-2-methylenenitriles 5a–7a, 4-hydroxy-2-methylenenitriles 8a–9a, 3-hydroxynitriles 10a–12a and 3-acyloxynitrile 13a into amides 1b–13b. Cross-linked enzyme aggregates (CLEAs) with nitrile hydratase and amidase activities (88% and 77% of the initial activities, respectively) were prepared from cell-free extract of this microorganism and used for nitrile hydration in presence of ammonium sulfate, which selectively inhibited amidase activity. The genes nha1 and nha2 coding for and β subunits of nitrile hydratase were cloned and sequenced.     

Improvement of stability of nitrile hydratase via protein fragment swapping

Nitrile hydratase (NHase), which catalyzes the hydration of nitriles to amides, is the key enzyme for the production of amides in industries. However, the poor stability of this enzyme under the reaction conditions is a drawback of its industrial application. In this study, we aimed to improve the stability of NHase (PpNHase) from Pseudomonas putida NRRL-18668 using a homologous protein fragment swapping strategy. One thermophilic NHase fragment from Comamonas testosteroni 5-MGAM-4D and two fragments from Pseudonocardia thermophila JCM3095 were selected to swap the corresponding fragments of PpNHase. Seven chimeric NHases were designed using STAR (site targeted amino recombination) software and molecular dynamics to determine the crossover sites for fragment recombination. All constructed chimeric NHases showed 1.4- to 3.5-fold enhancement in thermostability and six of them become more tolerant to high-concentration product. Notably, one of these NHases, 3AB, exhibited a 1.4 ± 0.05-fold increase in activity compared to the wild-type PpNHase. Circular dichroism spectrum analysis and homology modeling revealed that the 3AB slightly differed in secondary structure from wild-type PpNHase. The 3AB constructed in this study is useful for further industrial application, and the method for designing the chimeric protein using homologous protein fragment swapping without a decrease in activity may be a strategy to improve the stability of other enzymes.     

Efficient inducible expression of nitrile hydratase in Corynebacterium glutamicum

Nitrile hydratases are important industrial catalysts to produce valuable amides. In this study, we describe a comprehensive and systematic approach to the development of an inducible expression system for enhanced nitrile hydratase expression in Corynebacterium glutamicum. Through promoter engineering, codon optimization and design of ribosome binding site sequences, the nitrile hydratase activity toward 3-cyanopyridine was improved from 0.33 U/mg DCW to 12.03 U/mg DCW in shake-flask culture. By introduction of the novel inducible mmp expression system, the nitrile hydratase activity was further elevated to 14.97 U/mg DCW. Finally, a high nitrile hydratase yield of 1432 U/mL was achieved in a fed-batch fermentation process and used for nicotinamide production. These results provide new insights for the development of heterologous protein expression systems in C. glutamicum.     

Ferrous and ferric ions-based high-throughput screening strategy for nitrile hydratase and amidase

Rapid and direct screening of nitrile-converting enzymes is of great importance in the development of industrial biocatalytic process for pharmaceuticals and fine chemicals. In this paper, a combination of ferrous and ferric ions was used to establish a novel colorimetric screening method for nitrile hydratase and amidase with α-amino nitriles and α-amino amides as substrates, respectively. Ferrous and ferric ions reacted sequentially with the cyanide dissociated spontaneously from α-amino nitrile solution, forming a characteristic deep blue precipitate. They were also sensitive to weak basicity due to the presence of amino amide, resulting in a yellow precipitate. When amino amide was further hydrolyzed to amino acid, it gave a light yellow solution. Mechanisms of color changes were further proposed. Using this method, two isolates with nitrile hydratase activity towards 2-amino-2,3-dimethyl butyronitrile, one strain capable of hydrating 2-amino-4-(hydroxymethyl phosphiny) butyronitrile and another microbe exhibiting amidase activity against 2-amino-4-methylsulfanyl butyrlamide were obtained from soil samples and culture collections of our laboratory. Versatility of this method enabled it the first direct and inexpensive high-throughput screening system for both nitrile hydratase and amidase.     

Control of the nitrile-hydrolyzing enzyme activity in Rhodococcus rhodochrous IFO 15564: preferential action of nitrile hydratase and amidase depending on the reaction condition factors and its application to the one-pot preparation of amides from aldehydes

The reaction conditions towards the preferential action of either nitrile hydratase or amidase in the harvested whole cells of Rhodococcus rhodochrous IFO 15564 were elaborated. The amidase showed higher heat tolerance than the nitrile hydratase and, at 45 °C the amidase worked exclusively. DMSO assisted the preferential action of nitrile hydratase, however, at more than 30% (v/v) addition of DMF, the nitrile hydratase activity was completely lost and only amidase worked. A one-pot chemo-enzymatic conversion of aldehydes to amides [(1) aq. NH₃, I₂, DMSO; (2) Na₂S₂O₃; (3) harvested cells of R. rhodochrous] was established. Under these reaction conditions, most of the amidase was lost, and the incubation of the firstly formed intermediates, nitriles in aq. NH₃ was responsible for the selective inhibition of amidase. The freezing of harvested cells in an exhaustively deionized environment provided a long-term preservable “ready to use” for the organic chemist.     

Purification and characterization of the enantioselective nitrile hydratase from Rhodococcus sp. AJ270

Nitrile hydratase (NHase, EC 4.2.1.84) from Rhodococcus sp. AJ270 was purified with 23.96% yield after sonication, ammonium sulfate fractionation, ion exchange, hydrophobic and gel-filtration column chromatography. The enzyme showed intriguing characteristics: it hydrated not only aliphatic and heterocyclic nitriles but also aromatic ones. Some substrates were also hydrated enantioselectively to the corresponding amides. The enantiomeric excess (ee) value of the enzyme hydrating trans-2,2-dimethyl-3-phenylcyclopropanecarbonitrile was 84.7. The enzyme is composed of two subunits: an alpha subunit and beta subunit of 22 975 Da and 23 493 Da, respectively. The optimal temperature and pH for the catalytic reaction of the enzyme was 25 degrees C and pH 7.6. The enzyme activity of the purified NHase was strongly inhibited by some oxidizing agents and heavy metals.     

Biochemical characterization of Rhodococcus erythropolis N′4 nitrile hydratase acting on 4-chloro-3-hydroxybutyronitrile

The Rhodococcus erythropolis strain (N′4) possesses the ability to convert 4-chloro-3-hydroxybutyronitrile into the corresponding acid. This conversion was determined to be performed by its nitrile hydratase and amidase. Ammonium sulfate fractionation, DEAE ion exchange chromatography, and phenyl chromatography were used to partially purify nitrile hydratase from cell-free extract. A SDS-PAGE showed that the partially purified enzyme had two subunits and gel filtration chromatography showed that it consisted of four subunits of α₂β₂. The purified enzyme had a high specific activity of 860 U mg⁻¹ toward methacrylonitrile. The enzyme was found to have high activity at low temperature range, with a maximum activity occurring at 25 °C and be stable in the presence of organic acids at higher temperatures. The enzyme exhibited a preference for aliphatic saturated nitrile substrates over aliphatic unsaturated or aromatic ones. It was inhibited by sulfhydryl, oxidizing, and serine protease inhibitors, thus indicating that essential cysteine and serine residues can be found in the active site.The purified nitrile hydratase was able to convert 4-chloro-3-hydroxybutyronitrile into the corresponding amide at 15 °C. GC analysis showed that the initial conversion rate of the reaction was 215 mg substrate consumed min⁻¹ mg⁻¹. This demonstrated that this enzyme could be used in conjunction with a stereoselective amidase to synthesize ethyl (S)-4-chloro-3-hydroxybutyrate, an intermediate for a hypercholesterolemia drug, Atorvastatin.     

Transformation of the herbicide 2,6-dichlorobenzonitrile to the persistent metabolite 2,6-dichlorobenzamide (BAM) by soil bacteria known to harbour nitrile hydratase or nitrilase

In soil the herbicide 2,6-dichlorobenzonitrile (dichlobenil) is degraded to the persistent metabolite 2,6-dichlorobenzamide (BAM) which has been detected in 19% of samples taken from Danish groundwater. We tested if common soil bacteria harbouring nitrile-degrading enzymes, nitrile hydratases or nitrilases, were able to degrade dichlobenil in vitro. We showed that several strains degraded dichlobenil stoichiometrically to BAM in 1.5–6.0 days; formation of the amide intermediate thus showed nitrile hydratase rather than nitrilase activity, which would result in formation of 2,6-dichlorobenzoic acid. The non-halogenated␣analogue benzonitrile was also degraded, but here the benzamide intermediate accumulated only transiently showing nitrile hydratase followed by amidase activity. We conclude that a potential for dichlobenil degradation to BAM is found commonly in soil bacteria, whereas further degradation of the BAM intermediate could not be demonstrated.     

Preparation of both enantiomers of methyl 3-benzoyloxypentanoate by enzyme-catalysed hydrolysis of corresponding racemic nitrile and amide

Rhodococcus rhodochrous IFO 15564 enantioselectively hydrolysed racemic 3-benzoyloxypentanenitrile and 3-benzoyloxypentanamide to afford (R)-amide and (S)-car☐ylic acid with high enantiomeric excess (> 90%). In this reaction, both enantiomers of the starting nitrile were converted to the amide by nitrile hydratase, and amidase-catalysed enantioselective hydrolysis of the amide was responsible for the kinetic resolution. The lack of enantioselectivity of the nittile hydratase toward the racemic nitrile forms a marked contrast to the case of previously reported highly enantioselective conversion of prochiral 3-benzoyloxypentanedinitrile by this enzyme. since (R)-amide could be hydrolysed chemically to (R)-car☐ylic acid without any loss of its ee, the present microbial kinetic resolution serves as an effective method for preparing both enantiomers of synthetically useful 3-hydroxypentanoic acid derivatives.     

Operational stability of Brevibacterium imperialis CBS 489-74 nitrile hydratase

Brevibacterium imperialis CBS 489-74 was grown in broths prepared with yeast and malt extract, bacteriological peptone and 2% glucose or differently modified with the addition of Na-phosphate buffer, FeSO₄, MgSO₄ and CoCl₂. The peak production of nitrile hydratase (NHase) did not change significantly. At the stationary growth phase, the units per milliliter of broth (60 units ml⁻¹) were more important than those at the exponential growth phase.

The NHase operational stability of whole resting cells was monitored following the bioconversion of acrylonitrile to acrylamide in continuous and stirred UF-membrane reactors. The rate of inactivation was independent on buffer molarity from 25 to 75 mM and on pH from 5.8 to 7.4. Enzyme stability and activity remained unchanged in distilled water. The initial reaction rate increased from 12.8 to 23.8 g acrylamide/g dry cell/h, but NHase half-life dropped from 33 to roughly 7 h when temperature was varied from 4°C to 10°C. The addition of butyric acid up to 20 mM did not improve enzyme operational stability, and largely reduced (94%) enzyme activity. Acrylonitrile caused an irreversible damage to NHase activity. High acrylonitrile conversion (86%) was attained using 0.23 mg cells/ml in a continuously operating reactor.     

Rhodococcus pyridinovorans MW3, a bacterium producing a nitrile hydratase

Rhodococcus pyridinovorans MW3 was isolated from an arable land of manioc from the Congo for its ability to transform acrylonitrile to acrylamide. This strain contains a cobalt nitrile hydratase (NHase) showing high sequence homology with NHases so far described. The specific NHase activity was 97 U mg(-1) dry wt. NHase production by R. pyridinovorans MW3 was urea and Co-dependent. The NHase was active for acrylamide up to 60% (w/v) indicating its potential for acrylamide production.     

Enantioselective production of 2,2-dimethylcyclopropane carboxylic acid from 2,2-dimethylcyclopropane carbonitrile using the nitrile hydratase and amidase of Rhodococcus erythropolis ATCC 25544

The enantioselective production of (S)-2,2-dimethylcyclopropane carboxylic acid was investigated in 53 Rhodococcus and Pseudomonas related strains. Rhodococcus erythropolis ATCC 25544 was selected as it showed the highest enantioselectivity. The enantioselectivity was due to the amidase activity in a two-step reaction involving nitrile hydratase. The enantiomeric excess of the amidase was highest at pH 7.0 and decreased significantly above 20 °C. For the enantioselective production of (S)-2,2-dimethylcyclopropane carboxylic acid, the optimum reaction conditions of the cells were determined to be pH 7.0, 20 °C, and 10% (v/v) methanol and were the same as the optimum pH and temperature for the enantioselective conversion by the amidase. Under these conditions, the R. erythropolis ATCC 25544 cells, which harbored nitrile hydratase and amidase enzymes, produced 45 mM (S)-2,2-dimethylcyclopropane carboxylic acid from racemic 100 mM 2,2-dimethylcyclopropane carbonitrile with an 81.8% enantiomeric excess after 64 h.     

Rapid and specific identification of nitrile hydratase (NHase)-encoding genes in soil samples by polymerase chain reaction

A polymerase chain reaction (PCR) protocol was developed for the specific detection of genes coding nitrile hydratase (NHase). Primer design was based on the highly conserved sequences found in the coding region of the alpha-subunit gene corresponding to the metal-binding site. Purified genomic DNA from bacterial strains or directly from soil can serve as the target for the PCR, thus affording a simple and rapid method for screening NHase genes. The primer pairs, NHCo1/NHCo2 and NHFe1/NHFe2 yield PCR products corresponding to a partial coding sequence of cobalt and iron NHase genes, respectively. Using the PCR method, both types of iron- and cobalt-NHase-encoding genes were detected in DNA from pure cultures and soil samples. Furthermore consensus primers allowed rapid cloning and expression of novel NHases in Escherichia coli.     

Purification of a hyperactive nitrile hydratase from resting cells of Rhodococcus rhodochrous PA-34

A propionitrile-induced nitrile hydratase (NHase), a promising biocatalyst for synthesis of organic amides has been purified from cell-free extract of Rhodococcus rhodochrous PA-34. About 11-fold purification of NHase was achieved with 52% yield. The SDS-PAGE of the purified enzyme revealed that it consisted of two subunits of 25.04 kD and 30.6 kD. However, the molecular weight of holoenzyme was speculated to be 86 kD by native-PAGE. This NHase exhibited maximum activity at pH 8.0 and temperature 40°C. Half-life was 2 h at 40°C and 0.5 h at 50°C. The Km and Vmax were 167 mM and 250 μmole/min/mg using 25 mM 3-cyanopyridine as substrate. AgNO₃, Pb(CH₃COO)₂ and HgCl₂ inhibited the NHase to extent of 89–100%.     

Incorporation of thiolate donation using 2,2'-dithiodibenzaldehyde: complexes of a pentadentate N2S3 ligand with relevance to the active site of Co nitrile hydratase

The use of 2,2'-dithiodibenzaldehyde (DTDB) as a reactant for incorporating thiolate donors into the coordination sphere of a transition metal complex without the need for protecting groups is expanded to include the synthesis of complexes with pentadentate ligands. The ligand N,N'-bis(thiosalicylideneimine)-2,2'-thiobis(ethylamine) (tsaltp) is synthesized at a cobalt center by the reaction of DTDB with a Co complex of thiobis(ethylamine). The resulting Co complexes are thus coordinated by the N(2)S(3) pentadentate ligand through two imine N atoms, two thiolate S atoms, and one thioether S atom. A dimeric, bis-thiolate-bridged complex (1) is isolated and converted to a monomeric CN adduct (2) by treatment with KCN. The N(2)S(3) coordination environment provided by the tsaltp ligand is similar to that provided by the protein donors at the active site of the nitrile hydratase enzymes, with 2 being the first octahedral Co complex reported with such a coordination sphere.     

Chaperone-assisted maturation of the recombinant Fe-type nitrile hydratase is insufficient for fully active expression in Escherichia coli

Nitrile hydratase (NHase) has attracted substantial attention for industrial applications to produce large-scale amides. Several NHases have been investigated for functional expression in Escherichia coli (E. coli). A Fe-type NHase was obtained from an acetamiprid-degrading bacterium, Pseudoxanthomonas sp. AAP-7 and functionally expressed in E. coli BL21 (DE3). No significant NHase activity was detected from the E. coli expressing either the NHase gene alone or NHase and P46K genes transcribed as one unit. Purified recombinant NHase, co-expressed with P46K on two separate plasmids, exhibited the maximal enzyme activity. Furthermore, a GST tag attached to the N-terminus of α subunit resulted in a slight increase in the solubility and stability of NHase compared with a His tag at the C-terminus of β subunit. When co-expressed with the chaperones GroEL-GroES, the yield of the soluble recombinant NHase was improved substantially, while a small decrease in NHase activity was observed. The putative activator P46K was strictly required for production of the recombinant NHase for full enzyme activity, although the chaperones GroEL-GroES appeared to assist NHase to fold properly. This study of the expression of a fully active Fe-type NHase would provide another example to enhance our understanding of NHase biosynthesis.     

<Emphasis Type="Bold">Characterization of nitrile hydratation catalysed by </Emphasis><Emphasis Type="BoldItalic">Nocardia</Emphasis><Emphasis Type="Bold"> sp. 108</Emphasis>

Abstract Nocardia sp. 108 exhibited strong acrylonitrile-hydrating activity and its nitrile hydratase was Co²⁺-dependent. Nocardia sp. 108 was active within a broad pH range from 6.0 to 10.0 at 30°C and thermostable at temperatures below 35°C, but became unstable at temperatures above 45°C. Furthermore, it was found that Nocardia sp. 108 can hydrate indole-3-acetonitrile, p-chlorobenzonitrile, p-hydroxybenzylcyanide, 3,4,5-trimethoxybenzonitrile, p-aminobenzonitrile, 3-cyanopyridine, o-chlorobenzonitrile to the corresponding amides and hence displayed a broad substrate specificity. The temperature and pH optima for these hydrations were 28°C and pH 7.0–7.5, respectively. At the observed concentrations, acrylonitrile was completely converted within 5 min, while 3,4,5-trimethoxybenzonitrile, p-aminobenzonitrile, indole-3-acetonitrile, p-chlorobenzonitrile were approximately 21.71, 8.98, 34.44, 93.10% hydrated. p-Chlorobenzonitrile appeared to be the preferred aromatic nitrile for Nocardia sp. 108.     

Metabolism of acrylonitrile by Klebsiella pneumoniae

A gram-negative rod-shaped bacterium capable of utilizing acrylonitrile as the sole source of nitrogen was isolated from industrial sewage and identified as Klebsiella pneumoniae. The isolate was capable of utilizing aliphatic nitriles containing 1 to 5 carbon atoms or benzonitrile as the sole source of nitrogen and either acetamide or propionamide as the sole source of both carbon and nitrogen. Gas chromatographic and mass spectral analyses of culture filtrates indicated that K. pneumoniae was capable of hydrolyzing 6.15 mmol of acrylonitrile to 5.15 mmol of acrylamide within 24 h. The acrylamide was hydrolyzed to 1.0 mmol of acrylic acid within 72 h. Another metabolite of acrylonitrile metabolism was ammonia, which reached a maximum concentration of 3.69 mM within 48 h. Nitrile hydratase and amidase, the two hydrolytic enzymes responsible for the sequential metabolism of nitrile compounds, were induced by acrylonitrile. The optimum temperature for nitrile hydratase activity was 55°C and that for amidase was 40°C; both enzymes had pH optima of 8.0.Abbreviations PBM phosphate buffered medium - GC gas chromatography - GC/MS gas chromatography/mass spectrometry