Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

Handling Germinated Pollen on Millipore Membrane During the Feulgen and Autoradiographic Procedures

To prevent loss of pollen during the Feulgen's procedure, the pollen was grown on an autoclaved membrane filter (Millipore AA WP 025 00) in contact with a sterilized medium containing agar 0.5-1%, sucrose according to the genus (Malus 0.3-0.5 M; Persica and Tulipa 0.4 M), and H₃BO₃, 0.01%. To fix the germinated pollen of most species, the membrane was placed for 2 hr to overnight at 2-4 C on filter paper wet with the following mixture: OsO₄, 1 gm; CrO₃, 1.66 gm; and distilled water, 233 ml. To fix Persica pollen, 10% of glacial acetic acid had to be added to the fixative. Washing with distilled water and bleaching with a mixture of 3% H₂O₂ and sat. aq. ammonium oxalate, 1:1, were performed also on filter paper. Similarly, the preparation was processed for Feulgen staining by use of pieces of filter paper wet with the required fluids. Hydrolysis preceding the Schiff's reagent was performed at room temperature with 5 N HCl for 18 min. The differentiation after the Schiff's action was with 2% K₂S₂O₅ buffered to pH 2.3 with 9 ml of phosphate buffer (KH₂PO₄, 1.4 gm; conc. HCl, 0.35 ml and distilled water to make 100 ml). The stained pollen was floated off the membrane with a drop of glacial acetic acid to a gelatinized or an albumenized slide, and squashed. When the coverslip is removed the preparation may be either dehydrated and mounted or coated with autoradiographic film.     

A Rhodocyan Technic for Staining the Anterior Pituitary

A reproducible, one-step, differential staining technic which uses routine formalin-fixed tissue and gives brilliantly contrasting results is produced by incubating sections for 1 hr in a 60° C oven in the following dye mixture: 1% eosin B (CI#771), 8 ml; 1% anilin blue (CI#707), 2 ml; and buffer solution (0.1M citric acid, 1.1 ml; 0.2M Na₂HPO₄, 0.9 ml; distilled water, 28.0 ml) at pH 4.5. No differentiation is necessary. The method can be modified for duodenal enterochromaffin cells and alpha cells of pancreatic islets by adjusting the buffer to pH 3.6 and staining for only 3 min at 60° C.     

Brazilin-Toluidine Blue O and Hematoxylin-Darrow Red Methods for Brain and Spinal Cord

Tissue fixed in 10% formalin, formalin-95% ethanol 1:s CaCO₂ or phosphate buffer neutralized formalin, or methanol-chloroform 2:1, was dehydrated and embedded in paraffin or double-embedded by infiltration in 1% celloidin followed by a chloroform-paraffin sequence. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 24-26 C. For either method, mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. For brazilin-toluidne blue O, myelin was stained for 20-60 min, depending upon section thickness, in a self-differentiating solution consisting of: 0.15% Li₂CO₃ 75 ml; 6% brazilin in 95% ethanol, 25 ml; and NaIO₃ 75 mg. After a thorough washing, Nissl material was stained for 3-8 min in a solution consisting of: 0.1 M acetic acid, 90 ml; 0.1 M sodium acetate, 10 ml; and 1% toluidine blue 0, 2.5 ml. For hematoxylin-Darrow red, myelin was stained for 2-6 hr in a self-differentiating solution consisting of: 0.15% Li₂,CO₃ 95 ml; 10% hematoxylin in 95% ethanol, 5 ml; and NaIO₃ 25 mg. After a thorough washing, Nissl material was stained for 20 min or less in a solution consisting of: 0.1 M acetic acid, 90 ml; 0.1 M sodium acetate, 10 ml; Darrow red, 25 mg. This mixture was first boiled, cooled to room temperature and filtered. In both methods, washing, dehydration, clearing, and mounting completed the process. In the brazilin-toluidine blue technic, myelin sheaths were stained reddish purple; neuronal nuclei light blue with dark granules of chromatin; nucleoli dark blue; and cytoplasm blue with dark blue Nissl granules. In the hematoxylin-Darrow red procedure, myelin sheaths were blue-black; nuclei light red with dark granules of chromatin; nucleoli almost black; and cytoplasm red with bright red Nissl granules.     

A Simple Histochemical Reaction for Aldehydes

A study has been made on the possibility of replacing leucofuchsin by colored basic fuchsin for the histochemical demonstration of aldehydes. Several tissues from mammals and various pertinent fixatives were used. Aldehydes were freed from carbohydrates by oxidation and from thymonucleic acid by hydrolysis.

It was found that the colored form and not necessarily the leucoform of basic fuchsin can be used histochemically in demonstrating aldehydes. The technic used is as follows: (1) Treat with 1.0-0.5% H₅IO₆ (or in 1% KIO₄ in M/1 H₂SO₄) for 5 to 10 min. and wash thoroughly. For thymonucleic acid hydrolize with N HCl 5 min. at room temperature, 10 min. at 60°C. and 5 min. at room temperature. (2) Stain for 2-3 min. with 0.05% basic fuchsin in 5% ethanol, 3% phenol. (3). Transfer immediately to 1 or 2 changes of 1% sodium bisulphite or potassium metabisulphite in 0.1-0.2 N H₂SO₄ for a total of 5 min. (4) Rinse with water and treat with M H₂SO₄ in 95% ethanol for 3-5 min. 6. Wash thoroughly in water and dehydrate, clear, and mount. For glycogen and mucin the following counterstaining solution is recommended: orange G, 0.25 g.; light green SFY, 0.10 g.; phosphotungstic acid 0.50 g.; 50% ethanol, 100 ml.; glacial acetic acid, 0.25 ml.     

Staining Tissue of the Central Nervous System with Luxol Fast Blue and Neutral Red

The tissue is fixed in 10% neutral saline formalin for 1 day to 3 wk depending on the size of the block, dehydrated and embedded in paraffin. The sections are stained at 57° C for 2 hr, then at 22° C for 30 min, in a 0.0125% solution of Luxol fast blue in 95% alcohol acidified by 0.1% acetic acid. They are differentiated in a solution consisting of: Li₂CO₃, 5.0 gm; LiOH-H₂O, 0.01 gm; and distilled water, 1 liter at 0-1° C, followed by 70% alcohol, and then treated with 0.2% NaHSO₃. They are soaked 1 min in an acetic acid-sodium acetate buffer 0.1 N, pH 5.6, then stained with 0.03% buffered aqueous neutral red. Sections are washed in distilled water, 1 sec, then treated with the following solution: CuSO₄·5H₂O, 0.5 gm; CrK(SO₄)₂·12H₂O, 0.5 gm; 10% acetic acid, 3 ml; and distilled water, 250 ml. Dehydration, clearing and covering complete the process. Myelin sheaths are stained bright blue; meninges and the adventitia of blood vessels are blue; red blood cells are green. Nissl material is stained brilliant red; axon hillocks, axis cylinders, ependyma, nuclei and some cytoplasm of neuroglia, media and endothelium of blood vessels are pink.     

Bradykinin dilates rat middle cerebral artery and its large branches via endothelial B2 receptors and release of nitric oxide

Ring segments of rat middle cerebral artery (MCA) were prepared for measurement of isometric force and precontracted with 10⁻⁴ M uridine triphosphate (UTP). Concentration-effect curves (CEC) were constructed for bradykinin (BK, 10⁻⁸–10⁻⁵ M) in segments with functionally intect (E+) or denuded (E−) endothelium. E− segments did not dilate to BK. The BK receptor was characterized by application of specific B₁ or B₂ antagonists [des-Arg⁹-Leu⁸] BK (10⁻⁵ M) and [ -Arg⁰-Hyp³-Thi⁵- -Tic⁷-Oic⁸] BK (HOE140,3 × 10⁻⁷ M), respectively, or B₁ agonist [des-Arg⁹] BK (10⁻⁸–10⁻⁴ M). Involvement of nitric oxide (NO) was tested with N^G-nitro- -arginine (LNNA, 10⁻⁴ M). BK induced concentration-dependent relaxation with a maximal effect (E_max) of 40.86 ± 1.50% at 10⁻⁶ M and a pD₂ (−log₁₀ EC₅₀) of 6.818 ± 0.044. This relaxation could be prevented with HOE140 or LNNA, but was not influenced by [des-Arg⁹-Leu⁸] BK. [des-Arg⁹] BK did not induce any effect. These results demonstrate that BK induced relaxation via endothelial B₂ receptors and release of NO in isolated rat MCA.     

Specific Staining of Glycogen with Haematoxylin and Certain Anthraquinone Dyes

Specific staining of glycogen in rat liver fixed in chilled 80% alcohol, chilled formol alcohol or 10% neutral formalin has been accomplished with acid alizarin blue SWR, alizarin brilliant blue BS, alizarin red S, gallein, haematein, and haematoxylin solutions. TO prepare a staining solution, 1 gm dye, 1 gm K₂CO₃ and 5 gm KCl were dissolved by heating in 60 ml of water. Concentrated NH₄OH (0.880 sp.gr.), 15 ml, followed by 15 ml of dry methanol were added to 20 ml of the cooled solution. Paraffi sections were stained for 5 min, rinsed in dry methanol, cleared in xylene, and mounted in D.P.X. The high specificity obviated the need for counterstaining: nuclei and cytoplasm were unstained. Precipitation of stain onto the slide was rare. As all the dyes carried, like carminic acid, numerous groups capable of forming hydrogen bonds, it is suggested that the staining mechanism involved hydrogen bonding.     

A Pollen Grain Squash Technique for Saccharum and Related Genera

Anthers collected between 9 and 10 AM were treated for 1 hr at 26-28 C with a 0.5% solution of colchicine, washed for 2-4 min in water, placed in 0.002 M 8-hydroxyquinoline for 1 hr, washed in water for 10 min and fixed in: methanol, 60 ml; chloroform, 30 ml; distilled water, 20 ml; picric acid, 1 gm and mercuric chloride 1 gm, for 24 hr. After washing they were hydrolysed in 1 N HCl for 15 min at 60 C, stained in leuco basic fuchsin for 30 min, then smeared on a slide in a drop of acetocarmine. The slides were sealed, stored overnight, the paraffin was removed, and the slide passed through a 1:1 mixture of n-butyl alcohol and acetic acid, then through pure n-butyl alcohol and mounted in Canada balsam. The significant features of this procedure are: (1) use of chromosomes in the haploid condition for karyotype analysis, (2) better exaggeration of constrictions for easier interpretation of chromosome types and (3) good spreading in plants with a large chromosome number.     

Use of Gallocyanin as a Myelin Stain for Brain and Spinal Cord

Tissue fixed in 10% formalin, formol saline, CaCO₃ or phosphate buffer neutralized formalin, Baker's formol calcium, Cajal's formol ammonium bromide, formalin-95% ethanol 1:9, formalin-methanol 1:9, Lillie's methanol-chloroform or Salthouse's formol cetyltrimethylammonium bromide was dehydrated and embedded in paraffin. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 22-25 C. Mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. Myelin was stained in a gallocyanin self-differentiating solution for 1-2.5 hr; thick sections requiring the longer time. The staining solution (pH approximately 7.4) consisted of Na₂CO₃, 90 mg; distilled water, 100 ml; gallocyanin, 250 mg; and ethanol, 5 ml. The ethanol was added to this mixture last, and after the other ingredients had been boiled and then cooled to room temperature. After a staining and thorough washing, Nissl granules were stained for 5-10 min in a solution consisting of: 0.1 M acetic acid, 60 ml; 0.1 M sodium acetate, 40 ml; methyl green, 500 mg. Washing, dehydration, clearing and mounting completed the process. Myelin sheaths were stained dark violet; neuronal nuclei, light green with dark granules of chromatin; nucleoli of motor cells and erythrocytes, dark violet; cytoplasm, green with dark green Nissl granules. The simple and reliable method can be adapted easily for use with automatic tissue processors.     

Staining Mitochondria With Hematoxylin After Formalin-Sublimate Fixation; A Rapid Method

Mitochondria were stained in liver, kidney, pancreas, adrenal and intestinal mucosa of rat and mouse. Tissues 1 mm thick, were fixed in a mixture of saturated aqueous HgCl₂, 90 ml; formalin (37-38% HCHO), 10 ml, at room temperature (25°C) for 1 hr. Deparaffinized sections 3-4μ thick were treated with Lugol's iodine (U.S.P.) followed by Na₂S₂O₃ (5%), rinsed in water and the ribonucleic acid removed by any of the following procedures: 0.2 M McIlavaine's buffer, pH 7.0, 2 hr, or 0.2 M phosphate buffer, pH 7.0, 2 hr at 37°C; 0.1% aqueous ribonuclease, 2 hr at 37°C; 5% aqueous trichloracetic acid overnight at 37°C; or 1% KOH at room temperature for 1 hr. After washing in water, sections were treated with a saturated solution of ferric ammonium alum at 37°C for 8-12 hr and colored by Regaud's ripened hematoxylin for 18 hr. They were then differentiated in 1% ferric ammonium alum solution while under microscopic observation.     

Mercuric Bromphenol Blue Staining of Precipitin Lines in Agar

Lines formed by antibody-organ antigen reactions are stained particularly well by a modification utilizing the mercuric bromphenol blue (MBB) mixture of Mazia et al. (Biol. Bull., 104: 57-67, 1953). The agar covered slides are placed overnight in 0.85% NaCI at 4 C, followed by washing for 2 hr in 0.85% NaCI at 25 C. They are then rinsed for 10 min in distilled water, and dried overnight at 37 C. The precipitin lines are fixed by immersing the slides for 25 min in 95% alcohol, followed by 5 min hydration in distilled water. They are stained for 25 min in MBB mixture (HgCI₂, 10 gm; bromphenol blue, 0.1 gm; 95% ethanol, 100 ml). Excess stain is removed by immersing in acidified alcohol (95% ethanol, 98 ml; glacial acetic acid, 2 ml). Finally, the slides are passed through alcohol and xylene, and resin-mounted under coverslips.     

Hydrodynamic properties of the fractions of mannan formed by Rhodotorula rubra yeast

Aqueous solutions of fractions of an extracellular linear mannan formed by Rhodotorula rubra yeast have been investigated by hydrodynamic methods (high-speed sedimentation, translation isothermic diffusion and viscometry). The molecular weight was determined according to Svedberg ( ) and the polydispersity parameters of the initial sample were also determined (M_w/M_n = 1·20 and M_z/M_w = 1·21). Relationships between the molecular weight (M) and s_o, D_o and [η] in the range were: [η] = 2·33 × 10⁻² M^0.75, D_o = 1·65 × 10⁻⁴ M^0·58, s_o = 2·24 × 10⁻¹⁵ M^0·43. The equilibrium rigidity and hydrodynamic diameter of chains representing mannan molecules were evaluated.     

Staining of fresh, Undecalcified, thin Bone Sections

Fresh, undecalcified bone sections can be reproducibly and reliably stained by any of the following procedures: (A) Basic fuchsin, 1% in 30% alcohol, 48 hr, 22°C. (B) AgNO₃, 0.033 M, 48 hr, 22°C; washing 48 hr in a large volume of distilled water; exposure to light to develop the color. (C) Metallic sulfides (Co⁺⁺, Pb⁺⁺, Hg⁺⁺, Cu⁺⁺): the nitrate of the metal, 0.033 M, 48 hr, 22°C; then Na₂S, 0.033 M, 48 hr, 22° C. (D) Alizarin Red S, 0.1% solution in distilled water, 48 hr, 22°C; differentiated 48 hr at 22°C in weakly alkaline water, pH about 8. (E) KMnO₄: boiling 8-10 min in a 0.1 N, solution. With the exception of D the surface stain must be ground off the section for microscopic examination of its interior. Stain concentration, time and temperature can be altered to suit specific needs.     

Gross Demonstration of the Mammalian Atrioventricular Bundle by A Periodic Acid-Schiff Procedure

The following procedure stains the atrioventricular conduction system selectively. (1) Wash the fresh heart with physiological saline solution to free it of blood; (2) fix it in 10% formalin containing 0.5% HIO₄ for 1 hr; (3) wash in 3 changes of distilled water for 20 min; (4) keep in 80% alcohol for 12 hr to 2 wk; (5) wash with distilled water; (6) treat with a dilute Schiff's reagent containing 0.1 gm of basic fuchsin per 100 ml for 0.5-2 min; (7) rinse in three changes of 2% Na₂SO₃ in 0.2 N HCI for 3-5 min; (8) wash and examine in 80% alcohol; store in 80% alcohol.     

Characterization and Separation of Some of the Coordination Compounds of Chromium and Aluminon

Chromic nitrate and aluminon (ATA) react to form highly colored lakes. Examination of these lakes by the Vosburgh and Cooper method has led to the identification of a pigment [(ATA)Cr(H₂O)_x] which is insoluble in water and absolute alcohol, a deep red anionic component [(ATA)_BCr(H₂O)_x]^-y, and a purplish-red cationic component [(ATA)Cr₄(H₂O)_x]^+y. These components of the lake have been isolated and separated in the dry form. The anionic compound is apparently a simple coordination compound and can be used as a cytoplasmic stain while the cationic component is a chelate and can be used as a rather selective nuclear stain. In addition to these components, a number of other components were also found. Not only the ratio between chromium and aluminon but also the concentration of the reactants influences the formation of these different components. The amount of pigment formed is maximal with a molar ratio of 1 and a concentration of 10^-2 M or 10^-1 M. The anionic component is maximal with a molar ratio of 1 Cr to 6 aluminon at the 10^-1 M concentration, the cationic component is maximal with a molar ratio of 4 chromium to 1 aluminon at the 10^-1 M concentration. None of these are formed at the 10^-4 M concentration but only a deep redpurple soluble compound at the 1 : 1 ratio, which was not further investigated.     

Marking Individual Nerve Cells Through Electrophoresis of Ferrocyanide from a Microelectrode

Microelectrodes filled with an aqueous mixture containing 0.5 M potassium ferrocyanide and 2.5 M KCl were used to electrophoretically mark single neurones in the snail brain. After a physiological experiment, 3-4 μa at 20 v were allowed to flow for 10-15 min and carry the ferrocyanide into the cell. Cells from 40 μ to 130 μ have been marked. There is no diffusion of the Prussian blue (formed by soaking 10-15 min in 1.1 M FeCl₃) outside the cell. The marked cell can be studied both in the whole brain and in sections. In many cases a length of axon is stained also, and it can be traced through successive sections of the brain.     

Amino-functionalized zirconocene (C5H4CH(Me)NMe2)2ZrCl2, a catalyst for the dehydropolymerization of PhSiH3: Probing of peripheral substituent effects on catalyst dehydropolymerization activity

The amino-functionalized metallocene (C₅H₄CH(Me)NMe₂)₂ZrCl₂, [(Cp^N)₂ZrCl₂] was synthesized by salt metathesis of ZrCl₄ and 2 equiv. of C₅H₄CH(Me)NMe₂Li. The metallocene was obtained in good yield as a mixture of rac and meso diastereomers as established by NMR spectroscopy. The addition of 2 equiv. of n-BuLi to the metallocene (Cp^N)₂ZrCl₂ produced a co-catalyst system which was active, at a 1.0 mol% loading, in the dehydropolymerization of PhSiH₃ to poly(phenylsilane), PPSi. The PPSi was obtained as a 9:1 linear–cyclic mixture (M_w=3850, M_n=2300) as established by GPC analysis; ²⁹Si{¹H} NMR spectroscopy revealed an atactic polymer microstructure.     

Injection of Lymphatics: With Colored Cedar Oil; With Plastic

(1) The oil mass consists of: cedar oil, 1; color in oil (a paint pigment, e.g., Prussian blue), 1; and toluene, 2, parts by volume. To use, add 1 ml of diethyl ether to each 10 ml of mass, mix thoroughly and inject into the fresh organ with a very fine glass or metallic needle. Heat the organ in water at 50-60° C before starting the injection, massage gently after injection, then fix. For macroscopic studies, fix 5 days in 5% formalin, and dissect. For microscopic studies, fix at least 5 days in: formalin, 10 ml; Al₂(SO₄)₃, 2 gm; ZnSO₄, 2 gm; acetic acid, 4 ml; and distilled water, 90 ml. Dehydrate with dioxane, embed in paraffin and section at 10-20 μ. Stain with hematoxylin-eosin or with one of the following modifications of Van Gieson's formula: 1. 1% acid fuchsin, 10; picric acid (sat. aq.), 50; and 5% ZnSO₄, 40 volumes. 2. 1% acid fuchsin, 20; picric acid (sat. aq.), 80; and 5% CoSO₄, 40 volumes.

(2) The plastic mass consists of a 5-10% solution of Rhodopas (a vinyl copolymer) in acetone. Injection is made as with the oil mass except that a plastic squeeze-bottle and glass needle is preferable to a syringe. Indirect injection is used for both procedures, i.e., into the organ substance; not into a cannulated lymphatic vessel. After the plastic has hardened (24 hr), the unfixed tissue is subjected to corrosion by 5-10% NaOH in water.     

Bird Erythrocytes in Experimentally Introduced Blood Clots, for Differentiation from Autogenous Mammalian Clots

In studies of the effect of snake venom on blood clotting, 5 ml of freshly drawn, unclotted dog blood was centrifuged to separate red cells from plasma. Chicken erythrocytes were added to the plasma to give 2 × 10⁶ cells/ml. The mixture was clotted by adding 1 ml of 0.1 M CaCl₂ to it, and clotting allowed to occur in an 8 mm (ID) glass tube. The 10 cm long clot so obtained was injected into the inferior vena cava of the experimental dog. Such introduced clots and their emboli could be readily recognized by the presence of nucleated erythrocytes.