Specific and sensitive detection of Ralstonia solanacearum in soil with quantitative, real-time PCR assays

Aims:  The aim of this study was to develop a sensitive and an effective method suitable for large-scale detection and quantification of Ralstonia solanacearum in soil.
Methods and Results:  Based on the specific sequence of R. solanacearum strain G1000, the primer pair R.sol1-R.sol2 and the TaqMan probe Rs-pro were designed, and specific and sensitive PCR detection methods were successfully established. The detection limit was 100 fg μl⁻¹ DNA in conventional PCR and 1·2 fg μl⁻¹ in real-time PCR. By combining real-time PCR with the modified protocols to extract DNA from soil, it was possible to achieve real-time detection of R. solanacearum in soil, and the degree of sensitivity was 100 fg μl⁻¹. To detect inhibition in soil samples, an exogenous internal positive control (IPC) was included preventing false negative results, and IPC was successfully amplified from all samples tested. The methodology developed was used to detect the presence of R. solanacearum in tobacco fields in China.
Conclusions:  The real-time PCR combined with the protocol to extract DNA from soil led to the development of a specific, sensitive and rapid detection method for R. solanacearum in soil.
Significance and Impact of the Study:  The real-time PCR improves the detection sensitivity and specificity and provides an important tool for routine detection of R. solanacearum in soil samples and for epidemiological and ecological studies.     

Effects of feeding and induction strategy on the production of BmR1 antigen in recombinant E. coli

Aim:  To investigate the effects of feeding and induction strategies on the production of Bm R1 recombinant antigen.
Methods and Results:  Fed-batch fermentation was studied with respect to the specific growth rate and mode of induction to assess the growth potential of the bacteria in a bioreactor and to produce high yield of Bm R1 recombinant antigen. Cells were grown at a controlled specific growth rate (μ_set) during pre-induction, followed by constant feeding postinduction. The highest biomass (24·3 g l⁻¹) was obtained during fed-batch process operated at μ_set of 0·15 h⁻¹, whereby lower μ_set (0·075 h⁻¹) gave the highest protein production (9·82 mg l⁻¹). The yield of Bm R1 was increased by 1·2-fold upon induction with 1 mmol l⁻¹ IPTG (isopropyl-β- d -thiogalactoside) compared to using 5 mmol l⁻¹ and showed a further 3·5-fold increase when the culture was induced twice at the late log phase.
Conclusions:  Combination of feeding at a lower μ_set and twice induction with 1 mmol l⁻¹ IPTG yielded the best result of all variables tested, promising an improved method for Bm R1 production .
Significance and Impact of the Study:  This method can be used to increase the production scale of the Bm R1 recombinant antigen to meet the increasing demand for Brugia Rapid^™, a commercial diagnostic test for detection of brugian filariasis.     

Influence of phosphorus on biofilm formation in model drinking water distribution systems

Aims:  This study investigated the effects of phosphorus on biofilm formation via annular reactor systems in terms of biofilm cell growth, exopolysaccharide (EPS) production, biofilm structure and cell metabolic potential.
Methods and Results:  Drinking water biofilms were developed in annular reactors with supplement of carbon and different levels of phosphorus. The biofilm formation was monitored over a period of 30 days. Biofilm related parameters were examined by various methods, which included heterotrophic plate count, total carbohydrate content, confocal laser scanning microscopy and GN2 microplate assay. Our results showed that phosphorus addition can promote the biofilm cell growth (cell count increased about 1 log with addition of 30 and 300 μg l⁻¹ of phosphorus). However, the addition of 30 and 300 μg l⁻¹ of phosphorus caused 81% and 77% decrease in EPS production, respectively. The results of biofilm structure analysis showed that the addition of 30 and 300 μg l⁻¹ of phosphorus can induce thicker and less homogeneous biofilms with more biomass. Furthermore, the addition of 30 and 300 μg l⁻¹ of phosphorus dramatically increased the biofilm cell metabolic potential. The addition of 3 μg l⁻¹ of phosphorus was found to have minor effects on the parameters examined.
Conclusions:  The results indicate phosphorus addition to drinking water distribution system (DWDS) has a complicated effect on the biofilm formation.
Significance and Impact of the Study:  As the addition of phosphorus at certain levels can affect the biofilm growth in DWDS, care should be taken when phosphate-based corrosion inhibitors are used in the DWDS.     

3-Methylindole production is regulated in Clostridium scatologenes ATCC 25775

Aims:  3-Methylindole (3-MI) is a degradation product of l -tryptophan and is both an animal waste malodorant and threat to ruminant health. Culture conditions influencing 3-MI production in Clostridium scatologenes ATCC 25775 were investigated.
Methods and Results:  Extracellular 3-MI levels in cells cultured in brain heart infusion (BHI) medium (pH 7·0) at 33°C and 37°C for 72 h were 907 ± 38 and 834 ± 121  μ mol l⁻¹, respectively. Cells cultured in tryptone-yeast (TY) extract medium at 37°C for 48 h produced 104 ± 86  μ mol l⁻¹ 3-MI; however, addition of 1 mmol l⁻¹  l -tryptophan failed to increase extracellular levels (113 ± 50  μ mol l⁻¹ 3-MI). Specific activity of indole acetic acid decarboxylase measured in BHI, TY and TY plus 1 mmol l⁻¹ tryptophan-grown cells displayed 35-, 33- and 76-fold higher levels than in semi-defined medium-grown cells.
Conclusions:  When cultured in rich medium, at 33°C or 37°C and pH 7·0, Cl. scatologenes ATCC 25775 optimally produced 3-MI. Addition of l- tryptophan to medium did not lead to significant increases in extracellular 3-MI levels. Whole cell assays indicate growth in rich medium significantly up-regulated 3-MI production.
Significance and Impact of the Study:  Information presented here may prove useful in understanding what factors influence 3-MI production in malodorous animal wastes.     

Rapid and sensitive detection of Vibrio cholerae by loop-mediated isothermal amplification targeted to the gene of outer membrane protein ompW

Aims:  The present study was aimed to develop a loop-mediated isothermal amplification (LAMP) assay for rapid and specific detection of Vibrio cholerae .
Methods and Results:  A set of five designed primers that recognized specifically the V. cholerae ompW gene was used. The optimized time and temperature conditions for the LAMP assay were 75 min at 65°C, respectively. The LAMP method accurately identified 16 isolates of V. cholerae but did not detect 28 non- cholerae Vibrio isolates and 37 non- Vibrio bacterial isolates. The sensitivity of LAMP for V. cholerae detection in pure cultures was 2·2 × 10³ CFU ml⁻¹ or equivalent to 8 CFU per reaction. In the case of spiked shrimp samples without enrichment, the detection limit for V. cholerae was 2·2 × 10⁴ CFU g⁻¹ or equivalent to 20 CFU per reaction, while that of PCR was 100 CFU per reaction.
Conclusion:  The developed LAMP assay targeting ompW gene was rapid, specific and sensitive for V. cholerae detection.
Significant and Impact of the study:  The developed LAMP assay appears to be precise, accurate and a valuable tool for detection of V. cholerae . This assay can replace laborious biochemical tests for the identification of V. cholerae in contaminated food sample.     

Response surface methodology to optimize the nutritional parameters for enhanced production of jasmonic acid by Lasiodiplodia theobromae

Aims:  To find out the cumulative effect of the nutritional parameters and to enhance the production of jasmonic acid (JA) in static fermentation by Lasiodiplodia theobromae using response surface methodology (RSM).
Method and Results:  Malt extract, sucrose, NaNO₃ and MgSO₄.7H₂O were analysed by a 30-trial central composite design using RSM for optimizing their concentrations in the medium and the effect of their mutual interaction on JA production. Sucrose and NaNO₃ were found highly significant in influencing the JA production. Malt extract and MgSO₄.7H₂O showed an effect on the JA production in interaction with other variables. When the optimum values of the parameters obtained through RSM (19·95 g l⁻¹ malt extract, 50 g l⁻¹ sucrose, 7·5 g l⁻¹ NaNO₃ and 3·51 g l⁻¹ MgSO₄.7H₂O) were applied, 32% increase in JA production (299 mg l⁻¹) was observed in comparison with 225 mg l⁻¹ of JA produced with same media components not analysed by RSM and subsequently validated the statistical model.
Conclusions:  Increase in JA production was achieved by optimizing the nutritional parameters.
Significance and Impact of the Study:  This is the first report of using RSM for optimizing a medium for JA production. It resulted in an increase in JA production without augmentation of costly additives.     

Robust experimental design for optimizing the microbial inhibitor test for penicillin detection in milk

Aims:  To use experimental design techniques and a multiple logistic regression model to optimize a microbiological inhibition test with dichotomous response for the detection of Penicillin G in milk.
Methods and Results:  A 2³ × 2² robust experimental design with two replications was used. The effects of three control factors (V: culture medium volume, S: spore concentration of Geobacillus stearothermophilus , I: indicator concentration), two noise factors (Dt: diffusion time, Ip: incubation period) and their interactions were studied. The V, S, Dt, Ip factors and V × S, V × Ip, S × Ip interactions showed significant effects.
Conclusions:  The use of 100  μ l culture medium volume, 2 × 10⁵ spores ml⁻¹, 60 min diffusion time and 3 h incubation period is recommended. In these elaboration conditions, the penicillin detection limit was of 3·9  μ g l⁻¹, similar to the maximum residue limit (MRL). Of the two noise factors studied, the incubation period can be controlled by means of the culture medium volume and spore concentration.
Significance and Impact of the Study:  We were able to optimize bioassays of dichotomous response using an experimental design and logistic regression model for the detection of residues at the level of MRL, aiding in the avoidance of health problems in the consumer.     

Biosurfactant production by Pseudomonas sp. and its role in aqueous phase partitioning and biodegradation of chlorpyrifos

Aim:  To study the effect of biosurfactant on aqueous phase solubility and biodegradation of chlorpyrifos.
Methods and Results:  A Pseudomonas sp. (ChlD), isolated from agricultural soil by enrichment culture technique in the presence of chlorpyrifos, was capable of producing biosurfactant (rhamnolipids) and degrading chlorpyrifos (0·01 g l⁻¹). The partially purified rhamnolipid biosurfactant preparation, having a CMC of 0·2 g l⁻¹, was evaluated for its ability to enhance aqueous phase partitioning and degradation of chlorpyrifos (0·01 g l⁻¹) by ChlD strain. The best degradation efficiency was observed at 0·1 g l⁻¹ supplement of biosurfactant, as validated by GC and HPLC studies.
Conclusion:  The addition of biosurfactant at 0·1 g l⁻¹ resulted in more than 98% degradation of chlorpyrifos when compared to 84% in the absence of biosurfactant after 120-h incubation.
Significance and Impact of the Study:  This first report, to the best of our knowledge, on enhanced degradation of chlorpyrifos in the presence of biosurfactant(s), would help in developing bioremediation protocols to counter accumulation of organophosphates to toxic/carcinogenic levels in environment.     

Effect of culturing processes and copper addition on laccase production by the white-rot fungus Fomes fomentarius MUCL 35117

Aim:  To produce high laccase activities from the white-rot fungus Fomes fomentarius .
Methods and Results:  Different culturing methods, viz, cell immobilization on stainless steel sponges and plastic material and solid-state fermentation (SSF) using wheat bran as substrate were used for laccase production by the white-rot fungus F. fomentarius . The SSF study expresses the highest laccase activities, nearly to 6400 U l⁻¹ after 13 days of laboratory flasks cultivation. When the wheat bran medium was supplemented with 2 mmol l⁻¹ copper sulfate, laccase activity increased by threefold in comparison to control cultures, reaching 27 864 U l⁻¹. With the medium thus optimized, further experiments were performed in a 3 l fixed-bed bioreactor (working volume 1·5 l) leading to a laccase activity of about 6230 U l⁻¹ on day 13.
Conclusions:  The results obtained clearly showed the superiority of wheat bran for laccase production over stainless steel sponges and plastic material. Supplementing the wheat bran solid medium with 2 mmol l⁻¹ copper sulfate allowed obtaining high activities at flask scale. The system was scaled to fixed-bed laboratory reactor.
Significance and Impact of the Study:  The high enzyme production along with the low-cost of the substrate, showed the suitability of the system F. fomentarius – SSF for industrial purposes.     

Antifungal effect of gaseous nitric oxide on mycelium growth, sporulation and spore germination of the postharvest horticulture pathogens, Aspergillus niger, Monilinia fructicola and Penicillium italicum

Aim:  To evaluate the antifungal activity of nitric oxide (NO) against the growth of the postharvest horticulture pathogens Aspergillus niger , Monilinia fructicola and Penicillium italicum under in vitro conditions.
Methods and Results:  Different volumes of NO gas were injected into the Petri dish headspace to obtain the desired concentrations of 50–500  μ l l⁻¹ . The growth of the fungi was measured for 8 days of incubation in air at 25°C . All concentrations of NO were found to produce an antifungal effect on spore germination, sporulation and mycelial growth of the three fungi, with the most effective concentration for A. niger and P. italicum being 100 and 500  μ l l⁻¹ for M. fructicola .
Conclusions:  Short-term exposure to a low concentration of NO gas was able to inhibit the subsequent growth of A. niger , M. fructicola and P. italicum .
Significance and Impact of the Study:  NO gas has potential use as a natural fungicide to inhibit microbial growth on postharvest fruit and vegetables.     

Growth and volatile compound production by Brettanomyces/Dekkera bruxellensis in red wine

Aims:  Brettanomyces / Dekkera bruxellensis is a particularly troublesome wine spoilage yeast. This work was aimed at characterizing its behaviour in terms of growth and volatile compound production in red wine.
Methods and Results:  Sterile red wines were inoculated with 5 × 10³ viable cells ml⁻¹ of three B. bruxellensis strains and growth and volatile phenol production were followed for 1 month by means of plate counts and gas chromatography-mass spectrometry (GC-MS) respectively. Maximum population levels generally attained 10⁶–10⁷ colony forming units (CFU) ml⁻¹ and volatile phenol concentrations ranged from 500 to 4000 μg l⁻¹. Brettanomyces bruxellensis multiplication was also accompanied by the production of organic acids (from C₂ to C₁₀), short chain acid ethyl-esters and the 'mousy off-flavour' component 2-acetyl-tetrahydropyridine.
Conclusions:  Different kinds of 'Brett character' characterized by distinct metabolic and sensory profiles can arise in wine depending on the contaminating strain, wine pH and sugar content and the winemaking stage at which contamination occurs.
Significance and Impact of the Study:  We identified new chemical markers that indicate wine defects caused by B. bruxellensis. Further insight was provided into the role of some environmental conditions in promoting wine spoilage.     

Lactic acid production by Lactobacillus delbrueckii in a dual reactor system using packed bed biofilm reactor

Aims:  An integrated dual reactor system for continuous production of lactic acid by Lactobacillus delbrueckii using biofilms developed on reticulated polyurethane foam (PUF) is demonstrated.
Methods and Results:  Lactobacillus delbrueckii was immobilized on PUF, packed in a bioreactor and used in lactic acid fermentation. The rate of lactic acid production was significantly high with a volumetric productivity of 5 g l⁻¹ h⁻¹ over extended period of time. When coupled to a bioreactor, the system could be operated as dual reactor for over 1000 h continuously without augmentation of inoculum and no compromise on productivity.
Conclusions:  Polyurethane foams offer an excellent support for biofilm formation.
Significance and Impact of the Study:  The system was very robust and could be operated for prolonged period at a volumetric productivity of 4–6 g l⁻¹ h⁻¹.     

Potential of Bacillus sp. to produce polyhydroxybutyrate from biowaste

Aim:  To test the Bacillus strains for their abilities to produce polyhydroxybutyrate (PHB) from different sugars and biowaste (Pea-shells).
Methods and Results:  Six Bacillus strains were checked for their ability to produce PHB from GM2 medium supplemented with different sugars at the rate of 1% (w/v) and from biowaste and GM2 (BW : M) combinations (3 : 7, 1 : 1, 7 : 3). Glucose supplemented GM2 medium resulted in maximum PHB production of 435 mg l⁻¹ constituting 31–62% w/w of the total cell dry mass. Substituting GM2 medium to the extent of 50% with biowaste (pea-shell slurry) resulted in 945–1205 mg l⁻¹ PHB (55–65% w/w). Optimization for additional nitrogen supplementation, inoculum size resulted in a final PHB production of 3010–3370 mg l⁻¹ equivalent to 300 g kg⁻¹ biowaste (dry wt).
Conclusion:  The Bacillus strains were able to produce PHB from biowaste (Pea-shells) as cheap source of substrate.
Significance and Impact of the Study:  This is the first report on usage of pea-shells as feed for PHB production, opening new possibilities for its use for production of PHB and Bacillus as potential candidate for the purpose.     

Regulation of tacrolimus production by altering primary source of carbons and amino acids

Aims:  In the present communication, attempts have been made to regulate the tacrolimus production by supplementing commercial source of carbons and amino acids timely.
Methods and Results:  Tacrolimus production was regulated by supplying vegetable oils and amino acids, individually and in combination. Tacrolimus quantification was done by HPLC. Streptomyces spp. MA6858 B3178 was found to produce 115·3 mg l⁻¹ of tacrolimus. The rotation speed of shake flask, pH of the broth and supply of air were maintained at 7·1, 230 rev min⁻¹ and 2·0 vvm air respectively.
Conclusions:  The effect of carbons on tacrolimus production was noticed to be of diphasic manner. During the first 24 h of culture, monosaccharide is used for the growth of microbe. However, after the lapse of 36 h, addition of soya oil and l -lysine in combination enhanced the tacrolimus production to 115·3 mg l⁻¹. Besides this, pH of broth was also noticed as a critical factor in monitoring tacrolimus biosynthesis.
Significance and Impact of the Study:  The newly isolated mutant Streptomyces spp. MA6858 B3178 having high potential for tacrolimus production as compared to existing data can be well used for the commercialization of tacrolimus.     

The antibacterial mechanism of carvacrol and thymol against Escherichia coli

Aims:  To investigate the antibacterial mechanism of carvacrol and thymol against Escherichia coli.
Methods and Results:  The time-kill curve results showed that carvacrol and thymol at 200 mg l⁻¹ could inhibit the growth of E. coli . Flow cytometry and fluorescent dyes were used to explore the effect of two components on membrane permeability and membrane potential. In membrane permeability experiment, the mean fluorescence intensity of cells treated with 200 mg l⁻¹ carvacrol or thymol were lower than nonexposed cells. The ratio of red to green fluorescence intensity of DiOC₂(3) reflected the change of membrane potential. Carvacrol and thymol at 200 mg l⁻¹ caused the ratio of red/green decreasing from 0·42 of control to 0·08 and 0·07, respectively.
Conclusions:  Carvacrol and thymol had desired antimicrobial effect on E. coli . The antibacterial effects were attributed to their ability to permeabilize and depolarize the cytoplasmic membrane.
Significance and Impact of the Study:  This study showed the potential use of flow cytometry as a suitable method to investigate the mode of antibacterial action of essential oil components.     

Protective effect of salicylates against hydrogen peroxide stress in yeast

Aims:  To investigate the effects of salicylates in Saccharomyces cerevisiae exposed to oxidative stress induced by hydrogen peroxide (H₂O₂).
Methods and Results:  Saccharomyces cerevisiae was cultured through to the postlogarithmic phase of growth. Stress was induced by the addition of 1·5 mmol l⁻¹ H₂O₂ for 1 h, while N-acetyl-l-cysteine (NAC) and glutathione (GSSG) were used as control agents that affect the redox balance. Sodium salicylate, at 0·01–10 mmol l⁻¹or acetylsalicylic acid, at 0·02–2·5 mmol l⁻¹ was administered at various times before hydrogen peroxide stress. Both agents conferred resistance to a subsequent hydrogen peroxide stress, similarly to the induction of the adaptive response observed upon pretreatment with NAC and GSSG. Sodium salicylate was more potent as a short-term, but not as a long-term pretreatment agent, compared to acetylsalicylic acid.
Conclusions:  Pharmacological pretreatment with salicylates resulted in dose related increases in cell survival, indicating the induction of the protective response in yeast.
Significance and Impact of the study:  The possible role of salicylates in the modulation of the hydrogen peroxide stress response in eukaryotic cells address questions on the effects of these commonly used therapeutic agents in a number of disorders exhibiting an oxidative stress component.     

Automated concentration and recovery of micro-organisms from drinking water using dead-end ultrafiltration

Aims:  Concentration of pathogens diluted in large volumes of water is necessary for their detection. An automated concentration system placed online in drinking water distribution systems would facilitate detection and mitigate the risk to public health.
Methods and Results:  A prototype concentrator based on dead-end hollow fibre ultrafiltration was used to concentrate Bacillus atrophaeus spores directly from tap water. Backflush was used to recover accumulated particulates for analysis. In field tests conducted on a water utility distribution system, 3·2 × 10⁴–1·4 × 10⁶ CFU ml⁻¹ (6·1 × 10⁶–3·0 × 10⁸ CFU) were recovered from the filter when 2·9 × 10⁷–1·0 × 10⁹ CFU were spiked into the system. Per cent recovery ranged from 21% to 68% for flow volumes of 15–21 l. Tests using spore influent levels <10 CFU l⁻¹ (spike < 1000 CFU) yielded 23–40% recovery for volumes >100 l.
Conclusions:  B. atrophaeus spores at levels <10 CFU l⁻¹ were concentrated directly from tap water using an automated dead-end hollow-fibre ultrafiltration system.
Significance and Impact of the Study:  The prototype concentrator represents a critical step towards an autonomous system that could be installed in drinking water distribution lines or other critical water lines to facilitate monitoring. Recovered samples can be analysed using standard or rapid biosensor methods.     

Inactivation of oenological lactic acid bacteria (Lactobacillus hilgardii and Pediococcus pentosaceus) by wine phenolic compounds

Aims:  To investigate the inactivation properties of different classes of phenolic compounds present in wine against two wine isolates of Lactobacillus hilgardii and Pediococcus pentosaceus , and to explore their inactivation mechanism.
Methods and Results:  After a first screening of the inactivation potency of 21 phenolic compounds (hydroxybenzoic and hydroxycinnamic acids, phenolic alcohols, stilbenes, flavan-3-ols and flavonols) at specific concentrations, the survival parameters (MIC and MBC) of the most active compounds were determined. For the L. hilgardii strain, the flavonols morin and kaempferol showed the strongest inactivation (MIC values of one and 5 mg l⁻¹, and MBC values of 7·5 and 50 mg l⁻¹, respectively). For the P. pentosaceus strain, flavonols also showed the strongest inactivation effects, with MIC values between one and 10 mg l⁻¹ and MBC values between 7·5 and 300 mg l⁻¹. Observations by epifluorescence and scanning electron microscopy revealed that the phenolics damaged the cell membrane and promoted the subsequent release of the cytoplasm material into the medium.
Conclusions:  The antibacterial activity of wine phenolics against L. hilgardii and P. pentosaceus was dependent on the phenolic compound tested, and led not only to bacteria inactivation, but also to the cell death.
Significance and Impact of the Study:  New information about the inactivation properties of wine lactic acid bacteria by phenolic compounds is presented. It opens up a new area of study for selecting/obtaining wine phenolic preparations with potential applications as a natural alternative to SO₂ in winemaking.     

Ultra-trace analysis of soluble zinc, cadmium, copper and lead in Windermere lake water using anodic stripping voltammetry and atomic absorption spectroscopy

SUMMARY. The concentrations of trace metals in filtered and unfiltered lake water were measured using anodic stripping voltammetry, before and after digestion by ultra-violet irradiation, and by atomic absorption spectroscopy with electrothermal atomization. Total soluble components were estimated to be: zinc, 2.1 μg 1⁻¹; cadmium, <0.05 μg l⁻¹; lead, <(0.1 μg l⁻¹ and copper, 0.3 μg 1⁻¹. Atomic absorption spectrophotometric results and u.v.-digested, anodic stripping voltammetric results were in good agreement. All measurable zinc was electrochemically labile whereas copper above the detection limit of 0.09 μg l⁻¹ was electrochemically inert.     

Stimulation of biomethanation by Clostridium sp. PXYL1 in coculture with a Methanosarcina strain PMET1 at psychrophilic temperatures

Aim:  Bioaugumentation of low temperature biogas production was attempted by addition of cold-adapted Clostridium and a methanogen.
Methods and Results:  A psychrotrophic xylanolytic acetogenic strain Clostridium sp. PXYL1 growing optimally at 20°C and pH 5·3 and a Methanosarcina strain, PMET1, growing optimally on acetate and producing methane at 15°C were isolated from a cattle manure digester. Anaerobic conversion of xylose at 15°C with the coculture of the two strains was performed, and batch culture methane production characteristics indicated that methanogenesis occurred via acetate through 'acetoclastic' pathway. Stimulation studies were also undertaken to evaluate the effect of exogenous addition of the coculture on biogas yields at 15°C. Addition of 3 ml of PXYL1 at the rate of 12 × 10² CFU ml⁻¹ increased the biogas 1·7-fold (33 l per kg cowdung) when compared to control (19·3 l per kg cowdung) as well as increased the volatile fatty acid (VFA) levels to 3210 mg l⁻¹ when compared to 1140 mg l⁻¹ in controls. Exogenous of addition of 10 ml PMET1 inoculum at the rate of 6·8 ± 10² CFU ml⁻¹ in addition to PXYL1 served to further improve the biogas yields to 46 l kg⁻¹ as well as significantly brought down the VFA levels to 1350 mg l⁻¹.
Conclusions:  Our results suggest that the rate-limiting methanogenic step at low temperatures could be overcome and that biogas yields improved by manipulating the population of the acetoclastic methanogens.
Significance and Impact of the Study:  Stimulation of biomethanation at low temperature by coculture.