Tracking the physical aging of poly(ethylene oxide): A technical note

Physical aging of 2 types of PEO could be tracked by the combination of PALS, DSC, and SEM methods. After storing the samples at 40°C±2°C and 75%±5% RH, a decrease in the o-Ps lifetime values and an increase in the melting enthalpies as a function of storage time indicated a reorientation of the polymer chains. The limitations of monitoring enthalpy relaxation confirm the importance of methods that track volume relaxation, such as PALS. Structural changes could be observed even after a short storage time (4 weeks), which highlights the effect of further investigations of the influence of physical aging on the properties of PEO-containing dosage forms.     

Enzymatic surface hydrolysis of poly(ethylene terephthalate) and bis(benzoyloxyethyl) terephthalate by lipase and cutinase in the presence of surface active molecules

A lipase from Thermomyces lanuginosus and cutinases from Thermobifida fusca and Fusarium solani hydrolysed poly(ethylene terephthalate) (PET) fabrics and films and bis(benzoyloxyethyl) terephthalate (3PET) endo-wise as shown by MALDI-Tof-MS, LC–UVD/MS, cationic dyeing and XPS analysis. Due to interfacial activation of the lipase in the presence of Triton X-100, a seven-fold increase of hydrolysis products released from 3PET was measured. In the presence of the plasticizer N,N-diethyl-2-phenylacetamide (DEPA), increased hydrolysis rates of semi-crystalline PET films and fabrics were measured both for lipase and cutinase. The formation of novel polar groups resulted in enhanced dye ability with additional increase in colour depth by 130% and 300% for cutinase and lipase, respectively, in the presence of plasticizer.     

Chitosan cross-linked with poly(ethylene glycol)dialdehyde via reductive amination as effective controlled release carriers for oral protein drug delivery

The covalently cross-linked chitosan-poly(ethylene glycol)₁₅₄₀ derivatives have been developed as a controlled release system with potential for the delivery of protein drug. The swelling characteristics of the hydrogels based on these derivatives as the function of different PEG content and the release profiles of a model protein (bovine serum albumin, BSA) from the hydrogels were evaluated in simulated gastric fluid with or without enzyme in order to simulate the gastrointestinal tract conditions. The derivatives cross-linked with difunctional PEG₁₅₄₀-dialdehyde via reductive amination can swell in alkaline pH and remain insoluble in acidic medium. The cumulative release amount of BSA was relatively low in the initial 2 h and increased significantly at pH 7.4 with intestinal lysozyme for additional 12 h. The results proved that the release-and-hold behavior of the cross-linked CS–PEG₁₅₄₀H-CS hydrogel provided a swell and intestinal enzyme controlled release carrier system, which is suitable for oral protein drug delivery.     

The ethylene/metal(0) and ethylene/metal(I) redox system: model ab initio calculations

Ab initio calculations (coupled cluster with single and double excitations; CCSD) have been used to investigate the model redox systems ethylene:M(0) (M = Li, Na, K, Rb, Cs) and ethylene:M(I) (M = Be, Mg, Ca, Sr, Ba, Zn, Cd, Hg). Within C2v symmetry, the ground (2A1) states correspond to the charge distribution given in the title. The lowest (2B2) excited states correspond, somewhat counter intuitively, to the ethylene*-/=M(II)ion pair. These trends can be rationalized on the basis of simple electrostatic and configuration-mixing arguments that lead to two simple equations for predicting the electron-transfer energies for oxidation or reduction of the ethylene. The electron-transfer energies to the 2B2 ion pairs are dominated by the electrostatic ion-pairing energies.     

Studies on the activity and stability of immobilized horseradish peroxidase on poly(ethylene terephthalate) grafted acrylamide fiber

Having been activated with glutaraldehyde, modified poly(ethylene terephthalate) grafted acrylamide fiber was used for the immobilization of horseradish peroxidase (HRP). Both the free HRP and the immobilized HRP were characterized by determining the activity profile as a function of pH, temperature, thermal stability, effect of organic solvent and storage stability. The optimum pH values of the enzyme activity were found as 8 and 7 for the free HRP and the immobilized HRP respectively. The temperature profile of the free HRP and the immobilized HRP revealed a similar behaviour, although the immobilized HRP exhibited higher relative activity in the range from 50 to 60 °C. The immobilized HRP showed higher storage stability than the free HRP.     

Preparation and characterization of poly(ethylene glycol)-g-chitosan with water- and organosolubility

A new scheme was proposed for synthesizing poly(ethylene glycol)-g-chitosan (PEG-g-CS), where methoxy poly(ethylene glycol) iodide (MPEG-I) (M_n 2000) was used for N-substitution of triphenylmethyl chitosan (TPM-CS) in organic medium. The graft copolymers were obtained by subsequent removal of protecting groups with dichloroacetic acid. By varying PEG-I/TPM-CS feed ratio, the grafting levels (GL) of PEG can be adjusted. The chitosan derivatives were characterized by FTIR, ¹H NMR, ¹³C NMR and DSC. All the copolymers were soluble in water over wide pH range. Furthermore, organosolubility of the hybrids in DMF and DMSO was also achieved when the DS value more than 24%. The lysozyme degradation rate of the copolymers in aqueous neutral medium decreased with the increase of GL value.     

Analytical partitioning of poly(ethylene glycol)-modified proteins

Covalently grafting proteins with varying numbers (n) of poly(ethylene glycol) molecules (PEGs) often enhances their biomedical and industrial usefulness. Partition between the phases in aqueous polymer two-phase systems can be used to rapidly characterize polymer-protein conjugates in a manner related to various enhancements. The logarithm of the partition coefficient (K) approximates linearity over the range 0<n<x. However, x varies with the nature of the conjugate (e.g., protein molecular mass) and such data analysis does not facilitate the comparison of varied conjugates. The known behavior of surface localized PEGs suggests a better correlation should exist between log K and the weight fraction of polymer in PEG-protein conjugates. Data from four independent studies involving three proteins (granulocyte-macrophage colony stimulation factor, bovine serum albumin and immunoglobulin G) has been found to support this hypothesis. Although somewhat simplistic, ‘weight fraction’ based analysis of partition data appears robust enough to accommodate laboratory to laboratory variation in protein, polymer and phase system type. It also facilitates comparisons between partition data involving disparate polymer-protein conjugates.     

Effects of poly(ethylene glycol) on liposomes and erythrocytes: Permeability changes and membrane fusion

Poly(ethylene glycol) 6000 induced a concentration-dependent, time-dependent decrease in the latency of the reaction between Arsenazo III sequestered in liposomes and extraliposomal Ca²⁺. This was mediated by a gross change in liposomal permeability, i.e. by a release of Arsenazo III from liposomes rather than simply by an entry of Ca²⁺. The loss of latency was strongly temperature-dependent, and it was markedly diminished on increasing the cholesterol content of the liposomes. It was apparently not due to an osmotic stress of the polymer. The high activation energy found (63 kJ · mol^?1) is thought to indicate that the loss of latency resulted from local discontinuities in the lipid bilayers, caused by dehydration, rather than from partial or total lysis. Related microscopy experiments indicated that the polymer also caused the liposomes to fuse, and it is suggested that membrane fusion may have occurred at the sites of dehydration-induced discontinuities in adjacent bilayers, in addition the polymer was found to enhance the permeability of hen erythrocytes to Ca²⁺ in a manner that was comparable to its effect on liposomal latency, and it is proposed that cell fusion induced by poly(ethylene glycol) may occur at the sites of similarly induced discontinuities in the phospholipid bilayers of two closely adjacent cells.     

Locally Addressable Electrochemical Patterning Technique (LAEPT) applied to poly(L-lysine)-graft-poly(ethylene glycol) adlayers on titanium and silicon oxide surfaces

The protein-resistant polycationic graft polymer, poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), was uniformly adsorbed onto a homogenous titanium surface and subsequently subjected to a direct current (dc) voltage. Under the influence of an ascending cathodic and anodic potential, there was a steady and gradual loss of PLL-g-PEG from the conductive titanium surface while no desorption was observed on the insulating silicon oxide substrates. We have implemented this difference in the electrochemical response of PLL-g-PEG on conductive titanium and insulating silicon oxide regions as a biosensing platform for the controlled surface functionalization of the titanium areas while maintaining a protein-resistant background on the silicon oxide regions. A silicon-based substrate was micropatterned into alternating stripes of conductive titanium and insulating silicon oxide with subsequent PLL-g-PEG adsorption onto its surfaces. The surface modified substrate was then subjected to +1800 mV (referenced to the silver electrode). It was observed that the potentiostatic action removed the PLL-g-PEG from the titanium stripes without inducing any polyelectrolyte loss from the silicon oxide regions. Time-of-flight secondary ions mass spectroscopy and fluorescence microscopy qualitatively confirmed the PLL-g-PEG retention on the silicon oxide stripes and its absence on the titanium region. This method, known as "Locally Addressable Electrochemical Patterning Technique" (LAEPT), offers great prospects for biomedical and biosensing applications. In an attempt to elucidate the desorption mechanism of PLL-g-PEG in the presence of an electric field on titanium surface, we have conducted electrochemical impedance spectroscopy experiments on bare titanium substrates. The results showed that electrochemical transformations occurred within the titanium oxide layer; its impedance and polarization resistance were found to decrease steadily upon both cathodic and anodic polarization resulting in the polyelectrolyte desorption from the titanium surface.     

Capillary electrophoresis analysis of poly(ethylene glycol) and ligand-modified polylysine gene delivery vectors

Cationic polymers including polylysine (PLL) and polyethylenimine are being widely tested as gene delivery vectors in various gene therapy applications. In many cases, the polymers were further modified by hydrophilic polymer grafting or ligand conjugation, which had been shown to greatly affect the vector stability, delivery efficiency and specificity. The characterization of modified polycation is particularly critical for quality control and vector development. Here several different separation modes using capillary electrophoresis for the analytical characterization of the modified polymers are described. PLL molecules were grafted with poly(ethylene glycol) (PEG) chain or conjugated with epidermal growth factor and analyzed under various analytical conditions. Poly(N,N'-dimethylacrylamide)-coated capillary was used to analyze the modified PLL to reduce the interaction between the samples and the capillary wall. PLLs containing different numbers of conjugated ligands were well separated with the coating method but, for PLL-g-PEG, the separation was poor under the same conditions. A method using low buffer pH and hydroxypropylmethyl cellulose additive was developed. These methods are useful to characterize various polycations and important for the quality control and application of potential gene delivery vectors.     

Calmodulin-binding proteins: Visualization by I-calmodulin overlay on blots quenched with tween 20 or bovine serum albumin and poly(ethylene oxide)

To streamline detection of calmodulin-binding proteins, blotting techniques for the electrophoretic transfer of proteins onto nitrocellulose filters, followed by overlay with ¹²⁵I-calmodulin, have been adapted. Autoradiography of the ¹²⁵I-calmodulin-labeled blots allows the identification and quantitation of proteins that possess affinity for calmodulin. Five protocols for suppressing nonspecific binding and for enhancing specific interactions of ¹²⁵I-calmodulin with electrophoretically separated proteins were investigated. Tween 20 and bovine serum albumin alone, as well as combinations of bovine serum albumin and poly(ethylene oxide) or hemoglobin and gelatin, were evaluated as quenching and enhancing agents. Tween 20 proved highly effective for quenching nonspecific binding and for enhancing specific ¹²⁵I-calmodulin binding of a 61,000-M_r rat brain protein, which was only faintly observed on blots quenched with proteins alone. However, Tween 20 dissociated 50% of 68,000-M_r proteins and 80% of 21,000-M_r ¹²⁵I-labeled protein standards from the nitrocellulose filter. An alternative, the combination of bovine serum albumin followed by incubation with 15,000- to 20,000-M_r poly(ethylene oxide), proved satisfactory for the recovery of 61,000-M_r calmodulin-binding activity and for the detection of calmodulin-binding peptides (50,000 to 14,000 M_r) produced by limited proteolysis of rat brain 51,000-M_r calmodulin-binding protein. These blotting procedures for detection of calmodulin-binding proteins are compatible with a variety of one-dimensional and two-dimensional electrophoresis systems, including a two-dimensional electrophoresis system utilizing urea and sodium dodecyl sulfate in the first dimension and nonurea sodium dodecyl sulfate electrophoresis in the second, a system which proved useful for resolving calmodulin-binding proteins displaying anomalous electrophoretic migration in the presence of urea.     

Preparation and spectroscopic characterization of methoxy poly(ethylene glycol)-grafted water-soluble chitosan

The object of this study was to test the solubility of a methoxy poly(ethylene glycol) (MPEG)-grafted chitosan copolymer in organic solvents and aqueous solution. Water-soluble chitosan with low molecular weight (LMWSC) was used in a PEG-graft copolymerization. The MPEG was conjugated to chitosan using 4-dicyclohexylcarbodimide (DCC), and N-hydroxysuccimide (NHS). Introduction of PEG was confirmed by (1)H and (13)C NMR spectroscopy and FT-IR spectroscopy. The degree of substitution (DS) of MPEG into chitosan was calculated from (1)H NMR data and also by estimating the molecular weight (MW) using gel permeation chromatography (GPC). The DS values obtained from (1)H NMR spectroscopy and GPC were similar, indicating that MPEG-grafted LMWSC was synthesized and properly characterized. Furthermore, the introduction of PEG into chitosan increases the solubility in aqueous solutions over a range of pH values (4.0-11.0) and organic solvents such as DMF, DMSO, ethanol, and acetone.     

Micropatterns of cell adhesive proteins with poly(ethylene oxide)-block-Poly(4-vinylpyridine) diblock copolymer

Control of cell shape and behavior through the micropattern technique by spatial immobilization of adhesive proteins on a surface has provided novel insights in several aspects of cell biology, such as tissue morphogenesis, cell growth and cell differentiation, and apoptosis. In this work, we present the use of poly(ethylene oxide-block-poly(4-vinylpyridine) (PEO-b-P4VP) as a non-adhesive background to construct micropatterns of cell adhesive proteins. In the method presented, PEO-b-P4VP is used for its antifouling properties and at the same time, as a photosensitive material to define the micropatterns. The irradiation of PEO-b-P4VP with a short wavelength UV light through photolithographic mask, causes the polymer to crosslink and immobilize in the areas exposed. In the areas non-exposed the polymer can be removed. These areas can be subsequent back filled with the adhesive protein of interest to produce the final micropatterned cell chips.     

Controlling the physical behavior and biological performance of liposome formulations through use of surface grafted poly(ethylene glycol)

The presence of poly(ethylene glycol) (PEG) at the surface of a liposomal carrier has been clearly shown to extend the circulation lifetime of the vehicle. To this point, the extended circulation lifetime that the polymer affords has been attributed to the reduction or prevention of protein adsorption. However, there is little evidence that the presence of PEG at the surface of a vehicle actually reduces total serum protein binding. In this review we examine all aspects of PEG in order to gain a better understanding of how the polymer fulfills its biological role. The physical and chemical properties of the polymer are explored and compared to properties of other hydrophilic polymers. An evidence based assessment of several in vitro protein binding studies as well as in vivo pharmacokinetics studies involving PEG is included. The ability of PEG to prevent the self-aggregation of liposomes is considered as a possible means by which it extends circulation longevity. Also, a dysopsonization phenomenon where PEG actually promotes binding of certain proteins that then mask the vehicle is discussed.     

The use of fluorescence energy transfer to distinguish between poly(ethylene glycol)-induced aggregation and fusion of phospholipid vesicles

Two fluorescence energy transfer assays for phospholipid vesicle-vesicle fusion have been developed, one of which is also sensitive to vesicle aggregation. Using a combination of these assays it was possible to distinguish between vesicle aggregation and fusion as induced by poly(ethylene glycol) PEG 8000. The chromophores used were 1-(4′-carboxyethyl)-6-diphenyl-trans-1,3,5-hexatriene as fluorescent ‘donor’ and 1-(4′-carboxyethyl)-6-(4″-nitro)diphenyl-trans-1,3,5-hexatriene as ‘acceptor’. These acids were appropriately esterified giving fluorescent phospholipid and triacylglycerol analogues. At 20°C poly(ethylene glycol) 8000 (PEG 8000) caused aggregation of l-α-dipalmitoylphosphatidylcholine (DPPC) vesicles without extensive fusion up to a concentration of about 35% (w/w). Fusion occurred above this poly(ethylene glycol) concentration. The triacylglycerol probes showed different behaviour from the phospholipids: while not exchangeable through solution in the absence of fusogen, they appeared to redistribute between bilayers under aggregating conditions. DPPC vesicles aggregated with < 35% poly(ethylene glycol) could not be disaggregated by dilution, as monitored by the phospholipid probes. However, DPPC vesicles containing approx. 5% phosphatidylserine which had been aggregated by poly(ethylene glycol) could be disaggregated by either dilution or sonication. Phospholipid vesicles aggregated by low concentrations of poly(ethylene glycol) appear to fuse to multilamellar structures on heating above the lipid phase transition temperature.     

The interaction of phospholipid membranes with poly(ethylene glycol). Vesicle aggregation and lipid exchange

(1) The water soluble polymer, poly(ethylene glycol), causes aggregation of sonicated vesicles of dimyristoylphosphatidylcholine in a manner consistent with a steric exclusion mechanism. (2) Poly(ethylene glycol) promotes the exchange of lipids between multilamellar vesicles of dimyristoylphosphatidylcholine and dipalmitoylphosphatidylcholine when the lipids are in the liquid-crystalline state. (3) ³¹P-NMR studies demonstrate that the bilayer configuration of smectic mesophases of dipalmitoylphosphatidylcholine is substantially maintained in the presence of poly(ethylene glycol).     

Enzymatic preparation of streptavidin-immobilized hydrogel using a phenolated linear poly(ethylene glycol)

Hybrid gels constructed from proteins and polymers have attracted a wide range of attention in the field of biomedicine and bioengineering. We report herein the enzymatic preparation of polymer–protein hybrid hydrogels composed of terminally bis-functionalized linear poly(ethylene glycol) (PEG) and streptavidin (SA). PEG was conjugated with tyramine to introduce terminal phenolic hydroxyl (Ph-OH) groups. A peptide tag containing a tyrosine residue (G₄Y-tag) was genetically introduced at the C-terminus of SA. The Ph-OH-modified PEG and G₄Y-tagged SA (SA-G₄Y) were treated by horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H₂O₂) to yield (PEG-Ph-OH)–(SA-G₄Y) hybrid gels. Biotinylated enhanced green fluorescent protein (biotin-EGFP) was selectively captured in the obtained hybrid gels, indicating that SA-G₄Y retained its biological function. The amount of biotin-EGFP immobilized in the hybrid gels depended on the concentration of SA-G₄Y. In addition, biotinylated bacterial alkaline phosphatase (biotin-BAP) was immobilized in the hybrid gel. The immobilized biotin-BAP exhibited more than 95% of the initial activity after 5 rounds of recycling. The results suggest the facile functionalization of the hybrid gel with a variety of biotinylated functional molecules.     

Piezoelectric poly(vinylidene fluoride) microstructure and poling state in active tissue engineering

Tissue engineering strategies rely on suitable membranes and scaffolds, providing the necessary physicochemical stimuli to specific cells. This review summarizes the main results on piezoelectric polymers, in particular poly(vinylidene fluoride), for muscle and bone cell culture. Further, the relevance of polymer microstructure and surface charge on cell response is demonstrated. Together with the necessary biochemical cues, the proper design of piezoelectric polymers can open the way to novel and more reliable tissue engineering strategies for cells in which electromechanical stimuli are present in their environment.     

Synthesis and bioactivities of poly(ethylene glycol)–chitosan hybrids

Poly(ethylene glycol)–chitosan hybrids of various molecular weights having different degree of substitution were synthesized, by reductive N-alkylation of chitosan with poly(ethylene glycol) aldehyde, to study their bioactivities. The influence of these chitosan derivatives on the reactive oxygen species generation from canine polymorphonuclear leukocyte cells was investigated in vitro by chemiluminescence response. Reactive oxygen species generation by the influence of poly(ethylene glycol)–chitosan hybrids was decreased with the increase of degree of substitution. The reduction of interaction of poly(ethylene glycol)–chitosan hybrids with polymorphonuclear leukocyte cells might be caused by the decrease of amino group in chitosan main chain and increase of the steric hindrance by poly(ethylene glycol) chain. The influence of the poly(ethylene glycol)–chitosan hybrids on complement component C3 activation was investigated by single radial immunodiffusion method. Influence on complement component C3 activation by poly(ethylene glycol)–chitosan hybrids was almost same as chitosan.     

Determination of low levels of poly(ethylene glycol) 400 in plasma and urine by capillary gas chromatography-selected ion-monitoring mass spectrometry after solid-phase extraction

A convenient and sensitive method for the quantitative determination of poly(ethylene glycol) 400 in plasma and urine with capillary gas chromatography-mass spectrometry has been developed. The sample preparation involves solid-phase extraction with subsequent derivatization with heptafluorobutyric anhydride, which proved to give the most stable derivative. The derivatization procedure was optimized using experimental design, and different solid-phase extraction columns were evaluated. The limit of quantitation was 1 μmol/l (0.4 μg/ml) for both plasma and urine.