Identification of the Hind III polymorphic site in the PAI-1 gene: analysis of the PAI-1 Hind III polymorphism by PCR

The identification of the Hind III polymorphic site in the 3' end of the plasminogen activator inhibitor 1 (PAI-1) gene and a simple method to identify the Hind III polymorphism rapidly in the PAI-1 gene using PCR is described. The Hind III restriction site was identified by restriction site mapping and sequence analysis from a cosmid DNA clone. Genomic DNA was isolated from individual human umbilical cords and a 754-bp fragment of the human PAI-1 gene was amplified by PCR. Aliquots of the PCR products were digested with Hind III and analyzed by agarose gel electrophoresis. The presence of two fragments, 754 and 567 bp, was identified, and they were designated as 1/1 (750-bp band), 1/2 (754- and 567-bp bands), and 2/2 (567-bp band). The PCR method is considerably less time consuming than the conventional DNA genotyping using Southern blot analysis. To ensure that this new method identified the same PAI-1 genotypes as previously identified by Hind III restriction fragment length polymorphism (RFLP), samples were simultaneously genotyped by PCR and Southern blot analysis. Both methods identified the same Hind III genotypes in all the samples, confirming the reliability of this new PCR method for the rapid identification of the Hind III polymorphism in the human PAI-1 gene.     

Structure and organization of the C4 genes

This 200 000 Mr serum protein is coded for by at least two separate loci, C4A and C4B, which map in the HLA Class III region on chromosome 6 in man. Both loci are highly polymorphic with more than 30 alleles, including null alleles assigned to the two loci. The complete nucleotide sequence of a full length C4A cDNA clone and a substantial part of a C4b cDNA clone has shown class differences which can be used to synthesize nucleotide probes specific for C4A and C4B. Three C4 loci of approximately 16 kilobases each spaced by 10 kilobases have been identified in DNA from one individual and aligned 30 kilobases from the factor B gene by overlapping cloned genomic fragments from a cosmid library. Characterization of these genes by restriction mapping, nucleotide sequence analysis and hybridization with C4A and C4B specific synthetic oligonucleotides show that these genes are very similar.     

Nucleotide sequence of the SV40 DNA restriction fragment Hind C-Hap 2.

We here report the nucleotide sequence of the SV40 DNA fragment Hind C - Hap 2. The fragment was labeled at the 5'-ends by means of polynucleotide kinase and gamma-(32P) ATP and digested with a suitable restriction enzyme. The separated products were then partially degraded with the base-specific reagents dimethyl-sulphate or hydrazine followed by direct analysis on polyacrylamide gel. The Hind C - Hap 2 sequence is 126 base pairs long and one of the three possible reading frames for translation does not contain any termination codon. So, although no protein is known to be encoded by this region, the possibility cannot yet be completely ruled out. The sequence also contains several AT-rich blocks.     

The cDNA Cloning and Nucleotide Sequence of the Gene Encoding Nonstrucure Protein of Rice Dwarf Virus Genome Segment 10

The results of cloning and sequencing the gene encoding nonstructure protein of the rice dwarf virus (RDV) gtnome segment 10 with polymerase chain reaction(PCR) technique were reported. The amplified PGR product was cloned into Hind Ⅱ site of plasmid pGEM3zf(-) and analysed with restriction enzymes. The physical map of the cloned fragment has been constructed, the insert is 1150 bp in length with restriction enzyme sites of Sac Ⅰ, Hind Ⅲ, NdeⅠ, BamH Ⅰ, etc. Besides, two restriction enzyme sites Bgl Ⅱ and EcoR Ⅰ have been separetely added in the 5 and 3 end of the segment in order to be cloned into plant intermediate vector in a convenient way. The fragments cleaved by the above-mentioned restriction enzymes were subcloned and the DNA sequence of full length of segment 10 was determined. In comparison with the RDV epidemic in Japan, the nucleotide sequence and deduced amino acid sequence of cloned segment 10 are 96.03% and 97.17% in homology respectively.     

X-ray crystal structure of the C4d fragment of human complement component C4

C4 fulfills a vital role in the propagation of the classical and lectin pathways of the complement system. Although there are no reports to date of a C4 functional activity that is mediated solely by the C4d region, evidence clearly points to it having a vital role in a number of the properties of native C4 and its major activation fragment, C4b. Contained within the C4d region are the thioester-forming residues, the four isotype-specific residues controlling the C4A/C4B transacylation preferences, a binding site for nascent C3b important in assembling the classical pathway C5 convertase and determinants for the Chido/Rodgers (Ch/Rg) blood group antigens. In view of its functional importance, we undertook to determine the three-dimensional structure of C4d by X-ray crystallography. Here we report the 2.3A resolution structure of C4Ad, the C4d fragment derived from the human C4A isotype. Although the approximately 30% sequence identity between C4Ad and the corresponding fragment of C3 might be expected to establish a general fold similarity between the two molecules, C4Ad in fact displays a fold that is essentially superimposable on the structure of C3d. By contrast, the electrostatic characteristics of the various faces of the C4Ad molecule show marked differences from the corresponding faces of C3d, likely reflecting the differences in function between C3 and C4. Residues previously predicted to form the major Ch/Rg epitopes were proximately located and accessible on the concave surface of C4Ad. In addition to providing further insights on the current models for the covalent binding reaction, the C4Ad structure allows one to rationalize why C4d is not a ligand for complement receptor 2. Finally the structure allows for the visualization of the face of the molecule containing the binding site for C3b utilized in the assembly of classical pathway C5 convertase.     

Sequence and expression of the gene for N10-formyltetrahydrofolate synthetase from Clostridium cylindrosporum.

Sau3 A and Hind III restriction fragments of Clostridium cylindrosporum genomic DNA were used to isolate clones containing 80% of the N10-H4folate synthetase gene in a 5' fragment and the remaining 20% of the gene in the 3' fragment. These fragments were joined at a common SnaB I restriction site and expressed in Escherichia coli at a level equivalent to what is normally found in C. cylindrosporum. Sequence comparisons show a large degree of homology with genes from two other clostridial species, including a thermophile. Certain conserved sequences found in the three clostridial proteins and in the N10-H4folate synthetase portion of eukaryotic C1-H4folate synthases may represent consensus sequences for nucleotide and H4folate binding.     

Identification and characterization of PF4varl, a human gene variant of platelet factor 4.

A synthetic DNA probe designed to detect coding sequences for platelet factor 4 and connective tissue-activating peptide III (two human platelet alpha-granule proteins) was used to identify several similar sequences in total human DNA. Sequence analysis of a corresponding 3,201-base-pair EcoRI fragment isolated from a human genomic library demonstrated the existence of a variant of platelet factor 4, designated PF4var1. The gene for PF4var1 consisted of three exons and two introns. Exon 1 coded for a 34-amino-acid hydrophobic leader sequence that had 70% sequence homology with the leader sequence for PF4 but, in contrast, contained a hydrophilic amino-terminal region with four arginine residues. Exon 2 coded for a 42-amino-acid segment that was 100% identical with the corresponding segment of the mature PF4 sequence containing the amino-terminal and disulfide-bonded core regions. Exon 3 coded for the 28-residue carboxy-terminal region corresponding to a domain specifying heparin-binding and cellular chemotaxis. However, PF4var1 had amino acid differences at three positions in the lysine-rich carboxy-terminal end that were all conserved among human, bovine, and rat PF4s. These differences should significantly affect the secondary structure and heparin-binding properties of the protein based on considerations of the bovine PF4 crystal structure. By comparing the PF4var1 genomic sequence with the known human cDNA and the rat genomic PF4-coding sequences, we identified potential genetic regulatory regions for PF4var1. Rat PF4 and human PF4var1 genes had identical 18-base sequences 5' to the promoter region. The intron positions appeared to correspond approximately to the boundaries of the protein functional domains.     

Recombination of two homologous MHC class III genes of the mouse (C4 and Slp) that accounts for the loss of testosterone dependence of sex-limited protein expression

In most mouse strains, expression of a gene encoding sex-limited protein (Slp), an isotype of the fourth component of complement (C4), is induced by testosterone, or the gene is not expressed at all; however, in some wild-derived strains carrying H-2w7, H-2w16, or H-2w19 haplotype, Slp is expressed constitutively in the same way as C4. To examine the structural basis for the testosterone-independent expression of Slp, 41 overlapping clones together encoding the S region were isolated from C3H.W7 mouse (H-2w7) cosmid library. Five C4-related genes each spanning approximately 16 kb were identified among the cluster of cosmid clones and were isolated for structural study. One of the genes (C4w7) hybridized with the C4-specific oligonucleotide probe but not with the Slp-specific oligonucleotide probe, whereas the other genes (Slpw7a, Slpw7b, Slpw7c, and Slpw7d) hybridized only with the Slp-specific probe. Restriction mapping of these genes and sequencing of the selected regions of 5'-flanking regions of the genes were performed, and the results were compared with the data obtained with the C4 and Slp genes of FM (H-2d) and B10.BR (H-2k). These studies showed that three of the C4-related genes of C3H.W7 (Slpw7b, Slpw7c, and Slpw7d) are C4-Slp recombinant genes comprising a 5'-region derived from C4 gene and a 3'-region derived from Slp gene. It is suggested that 5'-flanking region derived from C4 in these C4-Slp recombinant genes accounts for testosterone-independent expression of Slp in C3H.W7 mouse.     

Transcriptional and translational mapping and nucleotide sequence analysis of a vaccinia virus gene encoding the precursor of the major core polypeptide 4b

We prepared antiserum that reacted with a major core polypeptide of approximately 62,000 daltons (62K polypeptide), designated 4b, and its 74K precursor, designated P4b. A cell-free translation product of vaccinia virus late mRNA that comigrated with P4b was specifically immunoprecipitated. The late mRNA encoding P4b hybridized to restriction fragments derived from the left end of the HindIII A fragment and to a lesser extent from the right side of the HindIII D fragment. A polypeptide that comigrated with P4a, the precursor of another major core polypeptide, was synthesized by mRNA that hybridized to DNA segments upstream of the P4b gene. Complete nucleotide sequence analysis of the P4b gene revealed an open reading frame, entirely within the HindIII A fragment, that was sufficient to encode a 644-amino-acid polypeptide of 73K. The 5' end of the P4b mRNA was located at or just above the translational initiation site.     

富集液中六六六（γ-BHC）脱氯基因的克隆、表达及降解试验

从长期受六六六污染的土壤中获得高效降解六六六的富集液 ,其对六六六 4种异构体的降解效果均为10 0 % ,但至今未能获得纯培养。根据国外报道的六六六脱氯基因linA序列 ,设计并合成一对引物 ,通过PCR技术从富集液总DNA中扩增了 4 71bp的基因片段 ,命名为linN ,测序结果表明linN与报道的脱氯基因linA和linA2的同源性达 99% ,与linA1的同源性达 97%。将linN定向克隆到pET 2 9α表达载体中 ,转化至E .coliBL2 1,经IPTG诱导后可表达分子量约 17kD的蛋白 ,表达产物占菌体总蛋白的 30 %左右 ;诱导后转化子的降解能力明显提高 ,粗酶也有很好的降解效果 ,为进一步分离纯培养和构建多功能农药残留降解菌提供了基础     

大肠杆菌青霉素G酰化酶基因及其邻近区域的核苷酸全序列

Some of microorganisms have been known to possess penicillin G acylase activity. The E. coli derived penicillin G acylase (PGA) can catalyze the conversion of penicillin G into phenylacetic acid and 6-amino-penicillanic acid, the latter is used as the starting compound for the industrial formation of semi-synthetic penicillins. Apart from its industrial importance, the enzyme PGA displays a number of interesting properties. Catalytically active enzyme is localized in the periplasmic space of E. coli cells and composed of two dissimilar subunits. The two subunits are apparently produced from a precursor protein, via a processing pathway hitherto unique in its features for a prokaryotic enzyme. The studies on processing of the precursor and on the relationship between structure and function of the mature enzyme are important theoretically. Previously we cloned a 3.5 kb DNA fragment from a strain (E. coli AS 1.76), which displays PGA activity. In this paper, we report a nucleotide sequence of the 3.5 kb DNA fragment containing PGA gene. After insertion of the DNA fragment into EcoR I and Hind III sites in pWR 13, pPGA 20 had been obtained. We subcloned the Hind III and Bg1 II treated fragment of 1.6 kb in length from pPGA 20 into Hind III and BamH I sites of pWR 13 to get a pPGA 1.6, and Bg1 II and EcoR I treated fragment of 1.9 kb in length into BamH I and EcoR I sites of pWR 13 to get a pPGA 1.9. The linearized pPGA 1.9 which were digested with appropriate restriction enzymes were progressively shortened from both ends respectively by digestion with Bal 31 nuclease, followed by cleavage of shortened target DNA off vector DNA molecules with appropriate restriction enzymes. The series of the DNA fragments shortened from EcoR I end were then cloned into plasmid pWR 13 which had previously digested with Hind III and Sma I enzymes (Fig. 1). The DNA fragment cloned in pWR 13 were directly sequenced on the resulted plasmids by using primer I and primer II. Thus we have obtained the complete nucleotide sequence of the 3.5 kb DNA fragment. The 3.5 kb fragment contains an intact PGA gene which is 2.6 kb.(ABSTRACT TRUNCATED AT 400 WORDS)     

A restriction endonuclease cleavage map of mitochondrial DNA from transformed hamster cells.

Mitochondrial DNA from cultured C13/B4 hamster cells was cleaved by the restriction endonucleases Hpa II, Hind III, Eco RI and Bam HI into 7, 5, 3 and 2 unique fragments, respectively. The summed molecular weights of fragments obtained from electrophoretic mobilities in agarose-ethidium bromide gels (with Hpa I-cleaved T7 DNA as standard) and electron microscopic analysis of fragment classes isolated from gels (with SV40 DNA as standard) were in good agreement with the size of 10.37 +/- 0.22 x 10(6) daltons (15,700 +/- 330 nucleotide pairs) determined for the intact circular mitochondrial genome. Cyclization of all Hind III, Eco RI and Bam HI fragments was observed. A cleavage map containing the 17 restriction sites (+/- 1% s.d.) was constructed by electrophoretic analysis of 32P-labeled single- and double-enzyme digestion products and reciprocal redigestion of isolated fragments. The 7 Hpa II sites were located in one half of the genome. The total distribution of the 17 cleavages around the genome was relatively uniform. The position of the D-loop was determined from its location and expansion on 3 overlapping restriction fragments.     

Studies of the recognition sequence of phi X174 gene A protein. Cleavage site of phi X gene A protein in St-1 RFI DNA.

It is already known that phi X gene A protein converts besides phi X RFI DNA also the RFI DNAs of the single-stranded bacteriophages G4, St-1, alpha 3 and phi K into RFII DNA. We have extended this observations for bacteriophages G14 and U3. Restriction enzyme analysis placed the phi X gene A protein cleavage site in St-1 RF DNA in the HinfI restriction DNA fragment F10 and in the overlapping HaeIII restriction DNA fragment Z7. The exact position and the nucleotide sequence at the 3'-OH end of the nick were determined by DNA sequence analysis of the single-stranded DNA subfragment of the nicked DNA fragment F10 obtained by gelelectrophoresis in denaturing conditions. A stretch of 85 nucleotides of St-1 DNA around the position of the phi X gene A protein cleavage site was established by DNA sequence analysis of the restriction DNA fragment Z7F1. Comparison of this nucleotide sequence with the previously determined nucleotide sequence around the cleavage site of phi X gene A protein in phi X174 RF DNA and G4 RF DNA revealed an identical sequence of only 10 nucleotides. The results suggest that the recognition sequence of the phi X174 gene A protein lies within these 10 nucleotides.