Lipid bilayers cushioned with polyelectrolyte-based films on doped silicon surfaces

Silicon semiconductors with a thin surface layer of silica were first modified with polyelectrolytes (polyethyleneimine, polystyrene sulfonate and poly(allylamine)) via a facile layer-by-layer deposition approach. Subsequently, lipid vesicles were added to the preformed polymeric cushion, resulting in the adsorption of intact vesicles or fusion and lipid bilayer formation. To study involved interactions we employed optical reflectometry, electrochemical impedance spectroscopy and fluorescent recovery after photobleaching. Three phospholipids with different charge of polar head groups, i.e. 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS) and 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) were used to prepare vesicles with varying surface charge. We observed that only lipid vesicles composed from 1:1 (mole:mole) mixture of DOPC/DOPS have the ability to fuse onto an oppositely charged terminal layer of polyelectrolyte giving a lipid bilayer with a resistance of >100 kΩ. With optical reflectometry we found that the vesicle surface charge is directly related to the amount of mass adsorbed onto the surface. An interesting observation was that zwitterionic polar head groups of DOPC allow the adsorption on both positively and negatively charged surfaces. As found with fluorescent recovery after photobleaching, positively charged surface governed by the presence of poly(allylamine) as the terminal layer resulted in intact DOPC lipid vesicles adsorption whereas in the case of a negatively charged silica surface formation of lipid bilayers was observed, as expected from literature.     

Lipid vesicle adsorption versus formation of planar bilayers on solid surfaces.

The absorption and spreading behavior of lipid vesicles composed of either palmitoyloleoylphosphatidylcholine (POPC) or Escherichia coli lipid upon contact with a glass surface was examined by fluorescence measurements. Fluorescently labeled lipids were used to determine 1) the amount of lipid adsorbed at the surface, 2) the extent of fusion of the vesicles upon contact with the surface, 3) the ability of the adsorbed lipids to undergo lateral diffusion, and 4) the accessibility of the adsorbed lipids by external water soluble molecules. The results of these measurements indicate that POPC vesicles spread on the surface and form a supported planar bilayer, whereas E. coli lipid vesicles adsorb to the surface and form a supported vesicle layer. Supported planar bilayers were found to be permeable for small molecules, whereas supported vesicles were impermeable and thus represented immobilized, topologically separate compartments.     

Differential mechanisms for calcium-dependent protein/membrane association as evidenced from SPR-binding studies on supported biomimetic membranes

In this work, two different types of supported biomimetic membranes were designed to study the membrane binding properties of two different proteins that both interact with cellular membranes in a calcium-dependent manner. The first one, neurocalcin, is a member of a subfamilly of EF-hand calcium-binding proteins that exhibit a calcium-myristoyl switch. The second protein is a bacterial toxin, the adenylate cyclase produced by Bordetella pertussis, the causative agent of whooping cough. The biomimetic membranes constructed in this study were either hybrid bilayer membranes or polymer-tethered membranes. Hemimembrane formation was obtained in two steps: a monolayer of 1-octadecanethiol or octadecyltrichlorosilane was self-assembled on top of the gold or glass surface, respectively, and then the egg-phosphatidyl choline (PC) vesicle fused on the hydrophobic alkyl layer. Polymer-tethered membranes on solid support were obtained using N-hydroxysuccinimide (NHS)-terminated-poly(ethyleneglycol) (PEG)-phospholipids as anchoring molecules. Egg-PC/1,2-distearoyl-sn-glycero-3-phospho-ethanolamine-poly(ethyleneglycol)-N-hydroxy-succinimide (DSPE-PEG-NHS) mixture liposomes were injected on the top of an amine grafted surface (cysteamine-coated gold or silanized glass); vesicles were linked to the surface and disrupted, leading to the formation of a bilayer. The biomimetic membrane constructions were followed by surface plasmon spectroscopy, while membrane fluidity and continuity were observed by fluorescence microscopy. Protein/membrane binding properties were determined by resonance surface plasmon measurements. The tethered bilayer, designed here, is very versatile as it can be adapted easily to different types of support. The results demonstrate the potentialities of such polymer-tethered artificial membranes for the study of proteins that insert into biological membranes such as toxins and/or integral membrane proteins.     

Substrate-supported phospholipid membranes studied by surface plasmon resonance and surface plasmon fluorescence spectroscopy

Substrate-supported planar lipid bilayer membranes are attractive model cellular membranes for biotechnological applications such as biochips and sensors. However, reliable fabrication of the lipid membranes on solid surfaces still poses significant technological challenges. In this study, simultaneous surface plasmon resonance (SPR) and surface plasmon fluorescence spectroscopy (SPFS) measurements were applied to the monitoring of adsorption and subsequent reorganization of phospholipid vesicles on solid substrates. The fluorescence intensity of SPFS depends very sensitively on the distance between the gold substrate and the fluorophore because of the excitation energy transfer to gold. By utilizing this distance dependency, we could obtain information about the topography of the adsorbed membranes: Adsorbed vesicles could be clearly distinguished from planar bilayers due to the high fluorescence intensity. SPSF can also incorporate various analytical techniques to evaluate the physicochemical properties of the adsorbed membranes. As an example, we demonstrated that the lateral mobility of lipid molecules could be estimated by observing the recovery of fluorescence after photobleaching. Combined with the film thickness information obtained by SPR, SPR-SPFS proved to be a highly informative technique to monitor the lipid membrane assembly processes on solid substrates.     

Influence of cosolvents on the hydrophobic surface immobilization topography of Candida antarctica lipase B

The presence of cosolvents and co-solutes during the immobilization of lipases on hydrophobic supports may influence the extent of lipase immobilization and the long-term catalytic stability of the biocatalyst. Candida antarctica B lipase immobilization was examined on a hydrophobic surface, i.e., gold modified with a methyl-terminated, self-assembled alkylthiol layer. Lipase adsorption was monitored gravimetrically using a quartz crystal microbalance (QCM). Lipase activity was determined colorimetrically by following p-nitrophenol propionate hydrolysis. Adsorbed lipase topography was examined by atomic force microscopy (AFM). Lipase adsorption from low ionic strength aqueous buffer produced a uniform confluent protein monolayer. Inclusion of 10% (vol) ethanol in the buffer during immobilization resulted in a 33% adsorbed mass increase. Chemically similar cosolvents, all at 10% by volume in buffer, were also individually examined for their influence on CALB adsorption. Glycerol or 1-propanol increased mass adsorption by 10%, while 2-propanol increased mass adsorption by 33%. QCM dissipation values increased threefold with the inclusion of either ethanol or 2-propanol in the medium during lipase adsorption, indicating formation of multilayers of CALB. Partial multilayer formation using 10% ethanol was confirmed by AFM. Inclusion of 10% ethanol in the CALB immobilization buffer decreased the specific activity of the immobilized lipase by 37%. The formation of lipase multilayers in the presence of certain cosolvents thus results in lower specific activity, which might be due to either influences on lipase conformation or substrate active site accessibility.     

Comparison of different protein immobilization methods on quartz crystal microbalance surface in flow injection immunoassay.

In this study, a quartz crystal microbalance (QCM) system operated repetitively in flow injection analysis (FIA) mode, is reported. Four immobilization approaches of seven different methods include: (i) physical adsorption; (ii) two thioamine thiolation methods, using cysteamine and cystamine for gold chemisorption and further coupling; (iii) two oxidized dextran spacer methods, coupling of cysteamine and cystamine thiolated QCM surface with periodate-oxidized dextran for further Schiff acid-base reaction; and (iv) two thiol-gold chemisorption-based self-assembled monolayer (SAM), applying short-chain, C(3), and long-chain, C(11), mercapto fatty acids to insolubilize human serum albumin (HSA) on QCM surface. Effects of these protein immobilization methods on FIA immunoassay of anti-HSA were compared. At the 0.01 mg/ml anti-HSA level, the lowest analyte concentration tested, the SAM using 11-mercaptoundecanoic acid as QCM surface activating agent generated a larger frequency shift than the other immobilization methods. This implied that the use of thiolated long-chain fatty acid constructed as self-assembled monolayer may thereby potentially be a useful protein immobilization method in QCM-FIA application.     

Covalent attachment of functionalized lipid bilayers to planar waveguides for measuring protein binding to biomimetic membranes.

A new method is presented for measuring sensitively the interactions between ligands and their membrane-bound receptors in situ using integrated optics, thus avoiding the need for additional labels. Phospholipid bilayers were attached covalently to waveguides by a novel protocol, which can in principle be used with any glass-like surface. In a first step, phospholipids carrying head-group thiols were covalently immobilized onto SiO2-TiO2 waveguide surfaces. This was accomplished by acylation of aminated waveguides with the heterobifunctional crosslinker N-succinimidyl-3-maleimidopropionate, followed by the formation of thioethers between the surface-grafted maleimides and the synthetic thiolipids. The surface-attached thiolipids served as hydrophobic templates and anchors for the deposition of a complete lipid bilayer either by fusion of lipid vesicles or by lipid self-assembly from mixed lipid/detergent micelles. The step-by-step lipid bilayer formation on the waveguide surface was monitored in situ by an integrated optics technique, allowing the simultaneous determination of optical thickness and one of the two refractive indices of the adsorbed organic layers. Surface coverages of 50-60% were calculated for thiolipid layers. Subsequent deposition of POPC resulted in an overall lipid layer thickness of 45-50 A, which corresponds to the thickness of a fluid bilayer membrane. Specific recognition reactions occurring at cell membrane surfaces were modeled by the incorporation of lipid-anchored receptor molecules into the supported bilayer membranes. (1) The outer POPC layer was doped with biotinylated phosphatidylethanolamine. Subsequent specific binding of streptavidin was optically monitored. (2) A lipopeptide was incorporated in the outer POPC monolayer. Membrane binding of monoclonal antibodies, which were directed against the peptide moiety of the lipopeptide, was optically detected. The specific antibody binding correlated well with the lipopepitde concentration in the outer monolayer.     

Structural studies of polymer-cushioned lipid bilayers.

The structure of softly supported polymer-cushioned lipid bilayers, prepared in two different ways at the quartz-solution interface, were determined using neutron reflectometry. The polymer cushion consisted of a thin layer of branched, cationic polyethyleneimine (PEI), and the bilayers were formed by adsorption of small unilamellar dimyristoylphosphatidylcholine (DMPC) vesicles. When vesicles were first allowed to adsorb to a bare quartz substrate, an almost perfect bilayer formed. When the polymer was then added to the aqueous solution, it appeared to diffuse beneath this bilayer, effectively lifting it from the substrate. In contrast, if the polymer layer is adsorbed first to the bare quartz substrate followed by addition of vesicles to the solution, there is very little interaction of the vesicles with the polymer layer, and the result is a complex structure most likely consisting of patchy multilayers or adsorbed vesicles.     

Structural organization of DMPC lipid layers on chemically micropatterned self-assembled monolayers as biomimetic systems

The growth structure of DMPC lipid layers on hydrophobic and hydrophilic alkylsilane-based self-assembled monolayers adsorbed on silicon has been investigated by means of X-ray reflectometry and atomic force microscopy. Hydrophilic modification of hydrophobically terminated ODS-SAMs has been achieved by dose-controlled irradiation with DUV light. While island formation of small DMPC bilayer islands is observed on hydrophobic SAM surfaces, closed layers of DMPC monolayers are formed on hydrophilic SAM surfaces. Furthermore, DMPC adsorption on chemically micropatterned substrates with alternating hydrophobic/hydrophilic surface properties has been studied by imaging ellipsometry and photoemission microscopy. Indication for at least partial bridging of hydrophobic areas by an adsorbed DMPC monolayer has been found.     

Preparation and applications of biofunctionalized,supported lipid bilayers and vesicles

Biofunctional surfaces require advanced design and preparation to match the (bio)recognition ability of biological systems [1]. This requires combined topographic, chemical and visco-elastic surface patterns to match proteins at the nm scale and cells at the micrometer scale. One example of biochemical functionalization, presented here, and which is of both fundamental and application interest, is supported biomimectic (cell)membranes. Specifically we describe preparation and applications of supported phospholipid membranes, which can be made on certain surfaces from unilamellar, 25–200 nm vesicles. On SiO2 at normal pH and with neutral lipids, the vesicles first adsorb intact, and then undergo a phase transformation to a supported bilayer. We have studied the coverage-, vesicle size-, and T-dependence of this process [2], using QCM-D [3], AFM, and SPR. When SiO2 is replaced by TiO2, vesicles adsorb intact. A surface pre-covered with intact vesicles, can be AFM patterned into areas with bilayer, vesicles, and empty surface patches [4]. The results depend critically on AFM tip interaction with vesicle and bilayer, which has been modeled by Monte Carlo simulations [5]. These biomembranes are inert towards protein adsorption [6] and cell attachement [7], which opens up for various applications. Addition of functional molecules, allows sensor functions [8]. Another application is functionalized membranes for surface-specific (stem) cell interactions [9].     

Missing mass effect in biosensor's QCM applications

Nowadays, liquid applications of quartz crystal microbalance (QCM) opened a way for in situ studies of proteins, vesicles and cells adsorbed from the solution onto the QCM surface. The sensitivity of QCM to the viscoelasticity of the adsorbed biomaterial can be a reason of the experimentally observed deviation from a linear dependence of QCM resonant frequency on mass deposition (the so-called Sauerbrey relation) and can limit its application for biosensoring. Presented here rigorous theoretical analysis explains the deviation from ideal mass response of soft overlayers in the contact with liquid. The fundamental result of the theory is the analog of Sauerbrey relation for layered viscous/viscoelastic medium which can be exploited for the correct physical interpretation of QCM experimental data in biofluids, in particular for measurements of the 'true' surface mass of adsorbed biomolecular films. We predict a new physical effect 'missing mass' of the sample in liquid phase measurements and compare the results given by our theory with QCM measurements on supported membranes.     

Dynamic adsorption behavior of poly(3-hydroxybutyrate) depolymerase onto polyester surface investigated by QCM and AFM

Time-dependent adsorption behavior of poly(3-hydroxybutyrate) (PHB) depolymerase from Ralstonia pickettiiT1 on a polyester surface was studied by complementary techniques of quarts crystal microbalance (QCM) and atomic force microscopy (AFM). Amorphous poly(l-lactide) (PLLA) thin films were used as adsorption substrates. Effects of enzyme concentration on adsorption onto the PLLA surface were determined time-dependently by QCM. Adsorption of PHB depolymerase took place immediately after replacement of the buffer solutions with the enzyme solutions in the cell, followed by a gradual increase in the amount over 30 min. The amount of PHB depolymerase molecules adsorbed on the surface of amorphous PLLA thin films increased with an increase in the enzyme concentration. Time-dependent AFM observation of enzyme molecules was performed during the adsorption of PHB depolymerase. The phase response of the AFM signal revealed that the nature of the PLLA surface around the PHB depolymerase molecule was changed due to the adsorption function of the enzyme and that PHB depolymerase adsorbed onto the PLLA surface as a monolayer at a lower enzyme concentration. The number of PHB depolymerase molecules on the PLLA surface depended on the enzyme concentration and adsorption time. In addition, the height of the adsorbed enzyme was found to increase with time when the PLLA surface was crowded with the enzymes. In the case of higher enzyme concentrations, multilayered PHB depolymerases were observed on the PLLA thin film. These QCM and AFM results indicate that two-step adsorption of PHB depolymerase occurs on the amorphous PLLA thin film. First, adsorption of PHB depolymerase molecules takes place through the characteristic interaction between the binding domain of PHB depolymerase and the free surface of an amorphous PLLA thin film. As the adsorption proceeded, the surface region of the thin film was almost covered with the enzyme, which was accompanied by morphological changes. Second, the hydrophobic interactions among the enzymes in the adlayer and the solution become more dominant to stack as a second layer.     

Phospholipid asymmetry in the isolated sarcoplasmic reticulum membrane

The total phospholipid content and distribution of phospholipid species between the outer and inner monolayers of the isolated sarcoplasmic reticulum membrane was measured by phospholipase A2 activities and neutron diffraction. Phospholipase measurements showed that specific phospholipid species were asymmetric in their distribution between the outer and inner monolayers of the sarcoplasmic reticulum lipid bilayer; phosphatidylcholine (PC) was distributed 48/52 +/- 2% between the outer and inner monolayer of the sarcoplasmic reticulum bilayer, 69% of the phosphatidyl-ethanolamine (PE) resided mainly in the outer monolayer of the bilayer, 85% of the phosphatidylserine (PS) and 88% of the phosphatidylinositol (PI) were localized predominantly in the inner monolayer. The total phospholipid distribution determined by these measurements was 48/52 +/- 2% for the outer/inner monolayer of the sarcoplasmic reticulum lipid bilayer. Sarcoplasmic reticulum phospholipids were biosynthetically deuterated and exchanged into isolated vesicles with both a specific lecithin and a general exchange protein. Neutron diffraction measurements directly provided lipid distribution profiles for both PC and the total lipid content in the intact sarcoplasmic reticulum membrane. The outer/inner monolayer distribution for PC was 47/53 +/- 1%, in agreement with phospholipase measurements, while that for the total lipid was 46/54 +/- 1%, similar to the phospholipase measurements. These neutron diffraction results regarding the sarcoplasmic reticulum membrane bilayer were used in model calculations for decomposing the electron-density profile structure (10 A resolution) of isolated sarcoplasmic reticulum previously determined by X-ray diffraction into structures for the separate membrane components. These structure studies showed that the protein profile structure within the membrane lipid bilayer was asymmetric, complementary to the asymmetric lipid structure. Thus, the total phospholipid asymmetry obtained by two independent methods was small but consistent with a complementary asymmetric protein structure, and may be related to the highly vectorial functional properties of the calcium pump ATPase protein in the sarcoplasmic reticulum membrane.     

Formation of supported planar bilayers by fusion of vesicles to supported phospholipid monolayers.

A technique for the production of supported phospholipid bilayers by adsorption and fusion of small unilamellar vesicles to supported phospholipid monolayers on quartz is described. The physical properties of these supported bilayers are compared with those of supported bilayers which are prepared by Langmuir-Blodgett deposition or by direct vesicle fusion to plain quartz slides. The time courses of vesicle adsorption, fusion and desorption are followed by total internal reflection fluorescence microscopy and the lateral diffusion of the lipids in the adsorbed layers by fluorescence recovery after photobleaching. Complete supported bilayers can be formed with phosphatidylcholine vesicles at concentrations as low as 35 microM. However, the adsorption, fusion and desorption kinetics strongly depend on the used lipid, NaCl and Ca2+ concentrations. Asymmetric negatively charged supported bilayers can be produced by incubating a phosphatidylcholine monolayer with vesicles composed of 80% phosphatidylcholine and 20% phosphatidylglycerol. Adsorbed vesicles can be removed by washing with buffer. The measured fluorescence intensities after washing are consistent with single supported bilayers. The lateral diffusion experiments confirm that continuous extended bilayers are formed by the monolayer-fusion technique. The measured lateral diffusion coefficient of NBD-labeled phosphatidylethanolamine is (3.6 +/- 0.5) x 10(-8) cm2/s in supported phosphatidylcholine bilayers, independent of the method by which the bilayers were prepared.     

Anti-rabbit immunoglobulin G detection in complex medium by PM-RAIRS and QCM Influence of the antibody immobilisation method

Two antibody immobilisation procedures were compared to set up an immunosensor for goat anti-rabbit immunoglobulin (anti-rIgG), i.e. rIgG covalently bound or immobilised via affinity to protein A (PrA). In both cases, the first layer of protein was covalently bound to a mixed self-assembled monolayer (SAM) of mercaptoundecanoic acid (MUA) and mercaptohexanol (C6OH) on a gold surface. The elaboration of the sensitive surfaces, as well as their selectivity and sensitivity were studied step by step by polarization modulation-reflection absorption infra-red spectroscopy (PM-RAIRS) and quartz crystal microbalance (QCM) with impedance measurement. QCM measurements showed that the viscoelastic properties of the antibody layer were markedly modified during the antigen recognition when the antibody was bound by affinity to PrA. The specific detection of antigen within a complex medium was assessed by PM-RAIRS thanks to the grafting of cobalt-carbonyl probes. Affinity constants between the immobilised rIgG and the anti-rIgG were determined from PM-RAIRS analysis.     

Chemisorption of proteins and their thiol derivatives onto gold surfaces: characterization based on electrochemical nonlinearity

This study was conducted to monitor the electrochemical responses of two proteins (bovine serum albumin (BSA) and gelatin) and their thiol derivatives adsorbed onto gold (Au) electrodes, which were analyzed by a "nonlinear" impedance method. A sinusoidal voltage is applied to a protein-containing aqueous solution and the waveform of the output current is analyzed by fast Fourier transformation (FFT). The intensities of the higher harmonics in the FFT varied with the species of protein and their thiol derivatives, and with time. From the higher harmonics, voltage-dependent capacitance and conductance were quantitatively evaluated to differentiate the state of adsorbed protein. Adsorption and desorption characteristics of BSA and its thiol derivative on the Au surface were continuously measured by a quartz crystal microbalance (QCM) in situ. The microscopic state of thiol-derivatized BSA adsorbed onto the Au surface was imaged by atomic force microscopy (AFM). In general, thiol-derivatized proteins were tightly adsorbed on the Au surface and showed no desorption. The present electrochemical measurements clearly differentiated adsorption characteristics of physically adsorbed (physisorbed) and chemically adsorbed (chemisorbed) proteins on Au surfaces.     

Effect of cationic lipids in the formation of asymmetries in supported bilayers

We have studied the formation of a supported bilayer containing both cationic and zwitterionic lipids by fusion of small unilamellar vesicles (SUV) onto the solid surface at low salt conditions using a combination of attenuated total reflection infrared (ATR-IR) and deuterium NMR spectroscopy with microcalorimetry. The data suggest that a significant cationic lipid asymmetry between the outer (distal) and the inner (proximal) monolayer of a supported bilayer results under conditions of prolonged incubation times of the solid support with the SUV coating solution. For a SUV composition of DPPC/DHDAB (4:1) we observed an enrichment of the cationic component in the proximal monolayer of up to 200% compared to the distal monolayer after 12 h incubation. It is suggested that the electrostatic potential arising from the solid surface is the driving force for the creation of this asymmetry by means of directed flip-flop between the monolayers and/or by temporary fusion between SUV from the bulk with the supported bilayer.     

Early steps of supported bilayer formation probed by single vesicle fluorescence assays

We have developed a single vesicle assay to study the mechanisms of supported bilayer formation. Fluorescently labeled, unilamellar vesicles (30-100 nm diameter) were first adsorbed to a quartz surface at low enough surface concentrations to visualize single vesicles. Fusion and rupture events during the bilayer formation, induced by the subsequent addition of unlabeled vesicles, were detected by measuring two-color fluorescence signals simultaneously. Lipid-conjugated dyes monitored the membrane fusion while encapsulated dyes reported on the vesicle rupture. Four dominant pathways were observed, each exhibiting characteristic two-color fluorescence signatures: 1) primary fusion, in which an unlabeled vesicle fuses with a labeled vesicle on the surface, is signified by the dequenching of the lipid-conjugated dyes followed by rupture and final merging into the bilayer; 2) simultaneous fusion and rupture, in which a labeled vesicle on the surface ruptures simultaneously upon fusion with an unlabeled vesicle; 3) no dequenching, in which loss of fluorescence signal from both dyes occur simultaneously with the final merger into the bilayer; and 4) isolated rupture (pre-ruptured vesicles), in which a labeled vesicle on the surface spontaneously undergoes content loss, a process that occurs with high efficiency in the presence of a high concentration of Texas Red-labeled lipids. Vesicles that have undergone content loss appear to be more fusogenic than intact vesicles.     

Adsorption Properties and Activities of Lipase on a Gold Substrate Modified by Self-assembled Monolayers

The adsorption properties, amount and specific activity of lipase D from Rhizopus delemar were investigated by employing a gold substrate modified with seven kinds of thiol monolayer. Quartz crystal microbalance measurements revealed that the amount of the enzyme adsorbed to the hydrophobic monolayers (e.g. benzenethiol) was much higher than that to the hydrophilic monolayers (e.g. 3-mercaptopropanoic acid). In contrast, lipase D adsorbed to the hydrophilic, 2-amino-1-ethanethiol monolayer showed the highest specific activity, the value being 300-fold higher than for the same enzyme dissolved in an aqueous medium.     

Adsorption properties and activities of lipase on a gold substrate modified by self-assembled monolayers.

The adsorption properties, amount and specific activity of lipase D from Rhizopus delemar were investigated by employing a gold substrate modified with seven kinds of thiol monolayer. Quartz crystal microbalance measurements revealed that the amount of the enzyme adsorbed to the hydrophobic monolayers (e.g. benzenethiol) was much higher than that to the hydrophilic monolayers (e.g. 3-mercaptopropanoic acid). In contrast, lipase D adsorbed to the hydrophilic, 2-amino-1-ethanethiol monolayer showed the highest specific activity, the value being 300-fold higher than for the same enzyme dissolved in an aqueous medium.