Respiratory and metabolic effects of decreased osmolality in conscious rats

We investigated the respiratory and metabolic effects of decreased osmolality, and the potential roles of angiotensin II (ANG II) and the subfornical organ (SFO) in mediating these effects, in conscious Sprague-Dawley (SD) rats. Gastric water loading was induced either by oral gavage or an externalized indwelling stomach tube (20 mL x kg(-1) distilled water at body temperature). Repeated measurements after oral gavage were obtained with and without water loading and with and without ANG II receptor block (saralasin, 1.3 microg x kg(-1) x min(-1) iv). At 15 min after water loading by oral gavage, ventilation (V, 1.14+/-0.08 L x kg(-1) x min(-1)) and tidal volume (10.7+/-0.6 mL x kg(-1)) were transiently higher (P < 0.05), at a time when plasma osmolality was decreased (-8+/-1 mOsm), compared with gavage tube alone (0.95+/-0.08 L x kg(-1) min(-1) and 9.1+/-0.7 mL x kg(-1), respectively). However, water loading via stomach tube did not stimulate V; only during the 60-s period of water infusion did V increase briefly, but this was due to increased respiratory frequency. Dye indicators demonstrated that oral gavage exposes upper airway and esophageal afferents to water, presumably accounting for respiratory stimulation. Lesions of the SFO did not affect respiration or metabolism. A decrease in osmolality, associated with both water loading techniques, caused a sustained increase in oxygen consumption (Vo2 ) and a decrease in the V/Vo2 ratio. ANG II receptor block reduced the Vo2 response and prevented the decrease in V/Vo2 following water loading by oral gavage, but did not affect the transient stimulation of V. Unlike larger mammals, decreased osmolality does not stimulate respiration in the SD rat.     

Conformations of poly-L-valine in solution

In order to test theoretical predictions that poly-L -valine can exist in an α-helical conformation, water-soluble block copolymers of L -valine and D , L -lysine were prepared. By carrying out the synthesis on a resin support (with the use of N-carboxyanhydrides) contamination of the individual blocks by any unreacted monomer from the previous block was avoided. A single glycine residue was incorporated at the C-terminus of the chain for use in amino acid analyses. Using optical rotatory dispersion and circular dichroism criteria, about 50% of the short valine block of (D , L -lysine HCl)₁₈-(L -valine)₁₅-(D , L -lysine-HCl)1₆-glycine was found to be in the right-handed α-helical conformation in 98% aqueous methanol, in water, the polymer appears to be a dimer, with the valine block being involved in the formation of an intermolecular β-structure.     

Water uptake and hydraulic properties of elongating cells in hydrotropically bending roots of Pisum sativum L

The water potential and hydraulic conductivity (Lp) of elongating cells in hydrotropically bending roots of the ageotropic mutant ageotropum of pea (Pisum sativum L.) were measured in situ. When agar blocks with water potentials of -0.03 and -0.8 MPa were unilaterally applied directly to a root tip, cells in the most rapidly elongating zone, 3-4 mm from the tip, showed marked differential growth. The rate of water uptake by a cell on the side treated with an agar block with a lower water potential was significantly larger in the outer first and second layers of cortex than on the other side. There were no differences in the values of turgor pressure, osmotic potential and calculated water potential between the two sides either in elongating or in mature cells, indicating the absence of any difference in the growth-induced water potential on the two sides of the root. Lp was significantly larger on the side with the agar block with lower water potential. The results suggest that the difference in the rate of water uptake during the differential cell growth that occurs during root hydrotropism might be induced mainly by a change in Lp.     

Synthesis and self-assembly of well-defined poly(amino acid) end-capped poly(ethylene glycol) and poly(2-methyl-2-oxazoline)

Poly(ethylene glycol) (PEG) and poly(2-methyl-2-oxazoline) (PMOx) are water-soluble, biocompatible polymers with stealth hemolytic activities. Poly(amino acid) (PAA) end-capped PEG and PMOx were prepared using amino-terminated derivatives of PEG and PMOx as macroinitiators for the ring-opening polymerization of γ-benzyl protected l-glutamate N-carboxyanhydride and S-benzyloxycarbonyl protected l-cysteine N-carboxyanhydride, respectively, in the presence of urea, at room temperature. The molecular weight of the PAA moiety was kept between M(n) = 2200 and 3000 g mol(-1). PMOx was polymerized by cationic ring-opening polymerization resulting in molecular weights of M(n) = 5000 and 10,000 g mol(-1), and PEG was a commercial product with M(n) = 5000 g mol(-1). Here, we investigate the self-assembly of the resulting amphiphilic block copolymers in water and the effect of the chemical structure of the block copolymers on the solution properties of self-assembled nanostructures. The PEG-block-poly(amino acid), PEG-b-PAA, and PMOx-block-poly(amino acid), PMOx-b-PAA, block copolymers have a narrow and monomodal molecular weight distribution (PDI < 1.3). Their self-assembly in water was studied by dynamic light scattering and fluorescence spectroscopy. In aqueous solution, the block copolymers associate into particles with hydrodynamic radii (R(H)) ranging in size from R(H) 70 to 130 nm, depending on the block copolymer architecture and the polymer molecular weight. Larger R(H) and critical association concentration values were obtained for copolymers containing poly(S-benzyloxycarbonyl-l-cysteine) compared to their poly(γ-benzyl-L-glutamate) analogue. FTIR investigations revealed that the poly(γ-benzyl-L-glutamate) block adopts a helical conformation, while the poly(S-benzyloxycarbonyl-L-cysteine) block exists as β-sheet.     

Producing Frozen Sections of Calcified Bone

We describe a procedure for the rapid production and maintenance of fresh frozen bone biopsies which can be used for a variety of immunohistochemical techniques. Within 5 min of excision. tissue is placed in cold 5% polyvinyl alcohol, surrounded with 3% carboxymethylcel-lulose in a hand made aluminum foil embedding mold and frozen by immersion in an absolute ethanol/dry ice slurry at -70 C. The tissue block is attached to the specimen stub with cryocom-pound and installed in a -32 C cryostat whose tungsten carbide D profile knife is maintained at -70 C. Automatic controls are set at a slow cutting speed and the “sectioning window” is adjusted to fit the biopsy size. Knife angle, thickness gauge and antiroll bar are changed to produce a complete section. The block face is smoothly “papered” with a polyvinylpyrrolidone (PVP) impregnated Ross lens paper strip. A single section is cut and positioned on a sequentially numbered, acid cleaned, double dipped chrome-alum gelatin coated slide: adhesion is aided by “press-blotting” with bibulous paper. Sections are stored at -20 C or in a desiccator at room temperature. A brief fixation followed by removal of the water soluble PVP and lens paper generates fresh frozen bone sections suitable for further analysis.     

A Rapid Method for Resectioning 0.5-4 μ Epoxy Sections for Electron Microscopy

A simple and rapid method is described for resectioning semithin Epon sections which have been stained for light microscopy, mounted on slides, and examined under immersion oil. The immersion oil is removed with xylene and the section is air dried. A drop of distilled water is applied to the slide and a razor blade is slid under the section. Freed from the slide, the section floats on the surface of the water and is transferred to another drop of water on the surface of a smooth, newly prepared Epon block face. The water under the section is withdrawn with bibulous paper. The section is thoroughly dried and bonded to the block surface by briefly heating in a 60 C oven. The tissue may then be re-sectioned and stained for electron microscopy in the conventional manner. This method has been used by several different technicians to produce ultrathin sections equal in quality to those produced by conventional methods and it greatly facilitates the selection of critical areas for examination by electron microscopy.     

Fertilization potential and polyspermy prevention in the egg of the nemertean, Cerebratulus lacteus

We investigated the electrical properties of the egg of the nemertean worm Cerebratulus, and found evidence that an electrically-mediated polyspermy block operates for a period of about 1 hr after fertilization. At fertilization, in natural or artificial sea water, the membrane potential shifts from its resting level of about -66 mV to a peak of about +43 mV, and in most cases remains greater than 0 mV for more than 1 hr. The average potential during the first 30 min is +22 +/- 8 mV (SD, n = 12). When the external Na+ concentration is reduced from 486 to 51 mM (choline substituted) the fertilization potential amplitude is reduced; the average potential during the first 30 min is -27 +/- 21 mV (SD, n = 5). Eggs inseminated in 51 mM Na+ sea water become polyspermic, indicating that polyspermy prevention depends on an electrically-mediated mechanism. The electrical block is required for about 60 min, since transfer to 51 mM Na+ sea water during this period results in polyspermy. During the first hour following fertilization, the egg is also developing a permanent, nonelectrical block; the degree of polyspermy which results upon transfer to low Na+ sea water decreases progressively with time. The permanent block appears to be at the level of the egg plasma membrane or glycocalyx, since the egg envelope is not a barrier to sperm penetration, nor does its removal induce polyspermy. Electron micrographs show no obvious changes in the morphology of the extracellular layers, plasma membrane or cortex of the egg after fertilization.     

A new technique for removal of amorphous phase tissue water without ice crystal damage: a preparative method for ultrastructural analysis and immunoelectron microscopy

An apparatus has been produced that can remove amorphous phase tissue water via molecular distillation without devitrification or rehydration. This method represents a fundamental advance in tissue preparation, making possible for the first time ultrastructural localization of soluble molecular entities without the problems of alteration, re-distribution, and loss which have plagued conventional techniques. Fresh slices of rat brain, liver, or kidney, and monkey retinal tissue were cryofixed by bounce-free, metal mirror cooling on copper bars immersed in liquid nitrogen (LN2). Tissue transferred under LN2 was then placed in a precooled copper specimen block, which was subsequently lowered into a LN2-cooled stainless steel chamber. After rough pumping at 1 X 10(-3) mbar with a mechanical pump to remove LN2, the chamber was evacuated with a cryopump or turbomolecular pump to achieve a hydrocarbon-free, ultra-high vacuum of 1 X 10(-8) mbar. Equilibrium temperature in the chamber before the drying cycle was -192 degrees C. The copper specimen block was equipped with a thermocouple and a programmable feedback-controlled heating circuit. Tissue was dried by increasing the specimen block temperature 1 degree C/hr during the critical drying phase while monitoring the rate of water removal with a partial pressure analyzer. Results obtained indicate that drying is complete below the devitrification temperature of amorphous phase tissue water. Dried tissue was fixed with osmium tetroxide vapor, vacuum-embedded in a low-viscosity epoxy resin, sectioned, stained, and viewed with the electron microscope. Processed tissue exhibits excellent morphological preservation without the use of pre-fixation or cryoprotective agents. Thin sections of this tissue are excellent for immunocytochemical staining and electron microprobe analysis.     

On the origin of asymmetric interactions between permeant anions and the cystic fibrosis transmembrane conductance regulator chloride channel pore

Single channel and macroscopic current recording was used to investigate block of the cystic fibrosis transmembrane conductance regulator (CFTR) Cl(-) channel pore by the permeant anion Au(CN)2(-). Block was 1-2 orders of magnitude stronger when Au(CN)2(-) was added to the intracellular versus the extracellular solution, depending on membrane potential. A point mutation within the pore, T-338A, strongly decreased the asymmetry of block, by weakening block by intracellular Au(CN)2(-) and at the same time strengthening block by external Au(CN)2(-). Block of T-338A, but not wild-type, was strongest at the current reversal potential and weakened by either depolarization or hyperpolarization. In contrast to these effects, the T-338A mutation had no impact on block by the impermeant Pt(NO2)4(2-) ion. We suggest that the CFTR pore has at least two anion binding sites at which Au(CN)2(-) and Pt(NO2)4(2-) block Cl- permeation. The T-338A mutation decreases a barrier for Au(CN)2(-) movement between different sites, leading to significant changes in its blocking action. Our finding that apparent blocker binding affinity can be altered by mutagenesis of a residue which does not contribute to a blocker binding site has important implications for interpreting the effects of mutagenesis on channel blocker effects.     

Dynamics of 9-aminoacridine block of sodium channels in squid axons

The interactions of 9-aminoacridine with ionic channels were studied in internally perfused squid axons. The kinetics of block of Na channels with 9-aminoacridine varies depending on the voltage-clamp pulses and the state of gating machinery of Na channels. In an axon with intact h gate, the block exhibits frequency- and voltage-dependent characteristics. However, in the pronase-perfused axon, the frequency- dependent block disappears, whereas the voltage-dependent block remains unchanged. A time-dependent decrease in Na currents indicative of direct block of Na channel by drug molecule follows a single exponential function with a time constant of 2.0 +/- 0.18 and 1.0 +/- 0.19 ms (at 10 degrees C and 80 m V) for 30 and 100 microM 9- aminoacridine, respectively. A steady-state block can be achieved during a single 8-ms depolarizing pulse when the h gate has been removed. The block in the h-gate intact axon can be achieved only with multiple conditioning pulses. The voltage-dependent block suggests that 9-aminoacridine binds to a site located halfway across the membrane with a dissociation constant of 62 microM at 0 m V. 9-Aminoacridine also blocks K channels, and the block is time- and voltage-dependent.     

Synthesis, swelling behavior, and biocompatibility of novel physically cross-linked polyurethane-block-poly(glycerol methacrylate) hydrogels

Physically cross-linked novel block copolymer hydrogels with tunable hydrophilic properties for biomedical applications were synthesized by controlled radical polymerization of polyurethane macroiniferter and (2,2-dimethyl-1,3-dioxolane) methyl methacrylate. The block copolymers were converted to hydrogels by the selective hydrolysis of poly[(2,2-dimethyl-1,3-dioxolane) methyl methacrylate] block to poly(glycerol methacrylate). The block copolymerization has been monitored by monomer conversion and molecular weight increase as a function of time. It was observed that the polymerization proceeded with a characteristic "living" behavior where both monomer conversion and molecular weight increased linearly, with increasing reaction time. The resulting hydrogels were investigated for their equilibrium water content (EWC), dynamic water contact angles, swelling kinetics, thermodynamic interaction parameters, plasma protein adsorption, and platelet adhesion. Similar to our previous mechanically responsive hydrogels (Mequanint, K.; Sheardown, H. J. Biomater. Sci. Polym. Ed. 2005, 10, 1303-1318), the present results indicated that block copolymer hydrogels have excellent hydrophilicity and swelling behavior with improved modulus of elasticity. The equilibrium swelling was affected by the hydrolysis time, block length of poly(glycerol methacrylate), temperature, and the presence of soluble salts. Fibrinogen adsorption and platelet adhesion were significantly lower for the hydrogels than for the control polyurethane, whereas albumin adsorption increased for the hydrogels in proportion to the contents of poly(glycerol methacrylate). These hydrogels have potential in a number of biomedical applications such as drug delivery and scaffolds for tissue engineering.     

ATRP synthesis of amphiphilic random,gradient, and block copolymers of 2-(dimethylamino)ethyl methacrylate and n-butyl methacrylate in aqueous media

Amphiphilic random, gradient, and block copolymers of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and n-butyl methacrylate (BMA) were synthesized by atom transfer radical polymerization (ATRP) in water/2-propanol mixtures using a methoxy-poly(ethylene glycol) (MPEG) (M(n) = 2000) macroinitiator. Kinetic studies indicate that the copolymerization is well controlled with molecular weights increasing linearly with conversion. Copolymers with molecular weights up to M(n) = 34000 and low polydispersities (M(w)/M(n) = 1.11-1.47) were prepared. The reactivity ratios were calculated for the copolymerizations catalyzed by CuBr/bpy, (r(DMAEMA) = 1.07, r(BMA) = 1.24). The thermosensitivity and aggregation properties of the random, gradient, and block copolymers significantly depended on the architecture of the copolymers. The lower critical solution temperature of MPEG-b-PDMAEMA(84) was 38 degrees C (5 wt % in water).     

Preparation of magnetic microspheres from water-in-oil emulsion stabilized by block copolymer dispersant

A new method for the preparation of magnetic microspheres is reported. The preparation involved first the dispersion of an aqueous phase, containing magnetite nanoparticles and a water-soluble homopolymer, into droplets in an organic medium using an amphiphilic block copolymer as the dispersant. This was followed by water distillation at a raised temperature from the aqueous droplets to yield polymer/magnetite particles. The structure of the particles was then locked in by a reagent being added to cross-link the water-soluble copolymer block and homopolymer. Since the hydrophobic block of the copolymer consisted of a protected polyester, the removal of the protective moieties from the coronal chains yielded poly(acrylic acid) or other functional polymers to render water dispersibility to the spheres and to enable biomolecule immobilization.     

An Improved System for Preparative Starch Block Electrophoresis

A starch block electrophoresis system is described which includes (a) a single-unit Lucite electrophoresis chamber, (b) temperature control with a circulating water bath and casting resin-coated brass cooling plate, (c) continuous monitoring of block surface temperature and (d) an easily-assembled apparatus for rapid elution of protein from the starch segments.     

An improved system for preparative starch block electrophoresis.

A starch block electrophoresis system is described which includes (a) a single-unit Lucite electrophoresis chamber, (b) temperature control with a circulating water bath and casting resin-coated brass cooling plate, (c) continuous monitoring of block surface temperature and (d) an easily-assembled apparatus for rapid elution of protein from the starch segments.     

Mutation-induced blocker permeability and multiion block of the CFTR chloride channel pore

Chloride permeation through the cystic fibrosis transmembrane conductance regulator (CFTR) Cl- channel is blocked by a broad range of anions that bind tightly within the pore. Here we show that the divalent anion Pt(NO2)42- acts as an impermeant voltage-dependent blocker of the CFTR pore when added to the intracellular face of excised membrane patches. Block was of modest affinity (apparent Kd 556 microM), kinetically fast, and weakened by extracellular Cl- ions. A mutation in the pore region that alters anion selectivity, F337A, but not another mutation at the same site that has no effect on selectivity (F337Y), had a complex effect on channel block by intracellular Pt(NO2)42- ions. Relative to wild-type, block of F337A-CFTR was weakened at depolarized voltages but strengthened at hyperpolarized voltages. Current in the presence of Pt(NO2)42- increased at very negative voltages in F337A but not wild-type or F337Y, apparently due to relief of block by permeation of Pt(NO2)42- ions to the extracellular solution. This "punchthrough" was prevented by extracellular Cl- ions, reminiscent of a "lock-in" effect. Relief of block in F337A by Pt(NO2)42- permeation was only observed for blocker concentrations above 300 microM; as a result, block at very negative voltages showed an anomalous concentration dependence, with an increase in blocker concentration causing a significant weakening of block and an increase in Cl- current. We interpret this effect as reflecting concentration-dependent permeability of Pt(NO2)42- in F337A, an apparent manifestation of an anomalous mole fraction effect. We suggest that the F337A mutation allows intracellular Pt(NO2)42- to enter deeply into the CFTR pore where it interacts with multiple binding sites, and that simultaneous binding of multiple Pt(NO2)42- ions within the pore promotes their permeation to the extracellular solution.     

A streptavidin-biotin binding system that minimizes blocking by endogenous biotin

Pretargeted radioimmunotherapy specifically targets radiation to tumors using antibody-streptavidin conjugates followed by radiolabeled biotin. A potential barrier to this cancer therapy is the presence of endogenous biotin in serum, which can block the biotin-binding sites of the antibody-streptavidin conjugate before the administration of radiolabeled biotin. Serum-derived biotin can also be problematic in clinical diagnostic applications. Due to the extremely slow dissociation of the biotin-streptavidin complex, this endogenous biotin can irreversibly block the biotin-binding sites of streptavidin and reduce therapeutic efficacy, as well as reduce sensitivity in diagnostic assays. We tested a streptavidin mutant (SAv-Y43A), which has a 67-fold lower affinity for biotin than wild type streptavidin, and three bivalent bis-biotin constructs as replacements for wild-type streptavidin and biotin used in pretargeting and clinical diagnostics. Biotin dimers were engineered with certain parameters including water solubility, biotinidase resistance, and linker lengths long enough to span the distance between two biotin-binding sites of streptavidin. The bivalent biotins were compared to biotin in exchange, retention, and off-rate assays. The faster off-rate of SAv-Y43A allowed efficient exchange of prebound biotin by the biotin dimers. In fluorescent competition experiments, the biotin dimer ligands displayed high avidity binding and essentially irreversible retention with SAv-Y43A. The off-rate of a biotinidase-stabilized biotin dimer from SAv-Y43A was 4.36 x 10(-)(6) s(-)(1), over 640 times slower compared to biotin. These findings strongly suggest that employing a mutant streptavidin in concert with a bivalent biotin can mitigate the deleterious impact of endogenous biotin, by allowing exchange of bound biotin and retention of the biotin dimer carriers.     

A Controllable Silver Stain for Nerve Fibers and Nerve Endings

A paraffin section method is described with a yellow-brown-black color range comparable to that of Ranson's pyridine silver block stain. After impregnation with activated protargol and reduction with a fine grain photographic developer, silver nitrate impregnation and reduction are repeated as often as necessary. The procedure is as follows:

Place hydrated sections of tissue fixed in chloral hydrate (25 g. in 100 ml. of 50% alcohol) in 1% aqueous protargol (Winthrop Chemical Co.) containing 5-6 g. metallic copper for 12-24 hours. After rinsing in 2 changes of distilled water, reduce 5 to 10 minutes in: Elon (Eastman Kodak Co.) 0.2 g., Na₂SO₃, dessicated, 10 g., hydroquinone 0.5 g., sodium borate powder 0.1 g., distilled water 100 ml. Wash thoroly in 4 or 5 changes of distilled water and place in 1% aqueous AgNO₃ for 10-20 minutes at 28°-50° C. Rinse in 2 or 3 changes of distilled water and reduce in the elon-hydroquinone solution. After thoroly washing in 4 or 5 changes of distilled water, examine under microscope.

If too pale, treat again in silver nitrate for 10-20 minutes, rinse, reduce 5-10 minutes and wash thoroly until nerve fibers show distinct microscopic differentiation, then dehydrate, clear and mount.     

Assessment of Micro-Basin Tillage as a Soil and Water Conservation Practice in the Black Soil Region of Northeast China

Micro-basin tillage is a soil and water conservation practice that requires building individual earth blocks along furrows. In this study, plot experiments were conducted to assess the efficiency of micro-basin tillage on sloping croplands between 2012 and 2013 (5°and 7°). The conceptual, optimal, block interval model was used to design micro-basins which are meant to capture the maximum amount of water per unit area. Results indicated that when compared to the up-down slope tillage, micro-basin tillage could increase soil water content and maize yield by about 45% and 17%, and reduce runoff, sediment and nutrients loads by about 63%, 96% and 86%, respectively. Meanwhile, micro-basin tillage could reduce the peak runoff rates and delay the initial runoff-yielding time. In addition, micro-basin tillage with the optimal block interval proved to be the best one among all treatments with different intervals. Compared with treatments of other block intervals, the optimal block interval treatments increased soil moisture by around 10% and reduced runoff rate by around 15%. In general, micro-basin tillage with optimal block interval represents an effective soil and water conservation practice for sloping farmland of the black soil region.