Iron and manganese complexes of benzothiazolyformazans

A series of Iron (Fe(II)) and manganese (Mn(II)) complexes of 1,3-substituted 5-(2-benzothiazolyl)formazans are reported. The crystal structures of the Fe(II) and Mn(II) complexes of 1,3-diphenyl-5-(2-benzothiazolyl)formazan are very similar and both contain a coordination sphere of four five-membered rings involving the N¹ and N³ nitrogen atoms of the formazan chain and the N² of the heterocyle resulting in a distorted octahedral structure in both cases. The distortions arise primarily from the spatial requirements of the bulky phenyl substituents.     

Iron release from transferrin induced by mixed ligand complexes of copper(II)

Summary Copper(II) complexes CuL₁L₂ with the ligand pairs 3-phosphoglycerate (PG)/ethylenediamine (en), phosphoserine (PS)/ethylenediamine, phosphoserine/malonate (mal) are shown to be effective in inducing the release of both iron atoms from di-ferric transferrin (Fe2Tf; human serum transferrin) at pH 7.3 in 1 M NaCl at 25°C. Half-times of the reaction with Cu(PG)(en)^– were less than 1 min at 0.02 M concentration. The iron(III) products are polynuclear hydroxo complexes. There is weaker interaction with Cu(PS) ₂ ^4– and virtually none with Cu(serine)(en) nor Cu(PS)(2,2-bipyridyl)^–, revealing crucial effects of the combined ligand sphere including the phosphomonoester group. The results suggest that the release of iron from Fe2Tf, or from either monoferric transferrins, occurred due to the breakdown of the stability of iron binding in conjunction with the expulsion of the synergistic anion carbonate (or oxalate). The active copper(II) complexes are postulated to be models of membrane components that could liberate iron from transferrin succeeding its uptake at the receptor sites of cells.Abbreviations PG phosphoglycerate - PS phosphoserine - en ethylenediamine - Fe2Tf diferric transferrin - Fe_cTf and Fe_NTf transferrin with iron bound to the lobe containing the C- or N-terminus, respectively - apoTf apotransferrin - K-3 all-cis-1,3,5-tris(trimethylammonio)-2,4,6-cyclo-hexanetriol - NTA nitrilotriacetic acid; bipy, 2,2-bipyridine; mal, malonate     

Chemistry of vinylidene complexes XI. Synthesis of trinuclear MnFePt complexes by means of consecutive assembling out of mono- and dimetal vinylidene precursors

The dimetal μ-vinylidene complexes Cp(CO)₂MnPt(μ-C = CHPh)L₂ (L = tert.-phosphine or -phosphite), which have been obtained by coupling of the mononuclear complex Cp(CO)₂Mn=C=CHPh and unsaturated PtL₂ unit, add smoothly the Fe(CO)₄ moiety to produce trimetal MnFePt compounds. The μ₃-vinylidene cluster CpMnFePt(μ₃-C=CHPh)(CO)₆(PPh₃) was prepared in quantitative yields from the reactions of Cp(CO)₂MnPt(μ-C=CHPh)(PPh₃)L (L = PPh₃ or CO) with Fe₂(CO)₉ in benzene at 20 °C. The phosphite-substituted complexes Cp(CO)₂Mnpt(μ-C=CHPh)L₂ (L = P(OEt)₃ or P(OPrⁱ)₃) react under analogous conditions with Fe₂(CO)₉ to give mixtures (2:3) of the penta- and hexacarbonyl clusters, CpMnFePt(μ₃-C = CHPh)(CO)₅L₂ and CpMnFePt(μ₃-C = CHPh)(CO)₆L, respectively. The similar reaction of the dimetal complex Cp(CO)₂MnPt(μ-C = CHPh)(dppm), in which the Pt atom is chelated by dppm = Ph₂PCH₂PPhPin2 ligand, gives only a 15% yield of the analogous trimetal μ₃-vinylidene hexacarbonyl product CpMnFePt(μ₃-C = CHPh)(CO)(dppm), but the major product (40%) is the tetranuclear μ₄-vinylidene cluster (dppm)PtFe₃(μ₄-C = CHPh)(CO)₉. The IR and ¹H, ¹³C and ³¹P NMR data for the new complexes are reported and discussed.     

Iron and cobalt complexes of 2,6-diacetylpyridine-bis(R-thiosemicarbazone) (R = H, phenyl) showing unprecedented ligand deviation from planarity

The syntheses, characterization, and single-crystal X-ray crystal structures are reported for four complexes of iron and cobalt with the pentadentate ligands, 2,6-diacetylpyridinebis(thiosemicarbazone) (H₂L¹) and 2,6-diacetylpyridinebis(phenylthiosemicarbazone) (H₂L²), including a cobalt dimer displaying a deviation from planarity which is unprecedented for this class of ligands and allows the ligand to occupy five positions of a pseudo-octahedral coordination sphere. This dimer reacts with KCN to produce a mononuclear complex of relevance to the active site of cobalt nitrile hydratase.     

Molecular structure and reactions of azobenzene complexes with iron-lithium compounds

Reactions of azobenzene have been studied with heteronuclear iron-lithium compounds formed in the reaction of FeCl₃ with LiPh, one of the dinitrogen reducing systems of the Vol'pin type: Ph₄FeLi₄(OEt₂)₄ (1) and (H₂)FePh₄Li₄(OEt₂)₄ (2). The structures of the azobenzene complexes formed, (N₂Ph₂)₃FeLi₃(OEt₂)₃ (3) and (N₂Ph₂)₃FeLi₂(THF)₂ (4), as well as an ether-containing analog of the latter, (N₂Ph₂)₃FeLi₂(OEt₂)₂ (5), were determined by X-ray analysis of single crystals. Coordination of azobenzene at FeLi₃ and FeLi₂ clusters was shown to result in a sigificant elongation of the NN bond; partial cleavage of this bond on protolysis of the complexes resulted in the formation of hydrazobenzene and aniline. Magnetic susceptibility measurements and theoretic analysis of a similar model complex leads to the conclusion that the iron oxidation state in 3 may be considered between iron (I) and iron(III) (close to iron(I)), whereas in 4 and 5 it is close to iron(II).     

Iron and cobalt complexes with the ligand (2-aminoethyl)bis(2-pyridylmethyl)amine (uns-penp) and derivatives

A series of iron(II)/(III) and cobalt(II)/(III) complexes with the tetradendate tripodal ligands (2-aminoethyl)bis(2-pyridylmethyl)amine (uns-penp), its methylated derivatives Me₂-uns-penp and Me₄-uns-penp as well as the amide ligand N-acetyl-N,N-bis[(2-pyridyl)methyl]ethylenediamine (acetyl-uns-penp) were synthesized and structurally characterized. They have been investigated in regard to their reactivity towards dioxygen and/or hydrogen peroxide. Complexes of this type seem to have a high potential to be useful in the activation of dioxygen for selective oxidation reactions of organic substrates.     

Iron(III) complexes: Preparation,characterization, antibacterial activity and DNA-binding

Iron(III) have been combined to well known quinolones (ciprofloxacin) and some Schiff bases with the help of coordination approach. Characterization of these compounds have been done using elemental analysis, magnetic measurements, thermogravimetric analysis, IR, UV-VIS, ¹H NMR and ¹³C NMR spectral investigation. Analytical studies suggest that the iron(III)-quinolone complexes assume a six-coordinated dimeric distorted octahedral geometry. All the compounds show a good antibacterial activity against broad range of bacteria like Bacillus cereus, Staphylococcus aureus, Escherichia coli, Bacillus subtilis, Salmonella typhi and Serratia marcescens, whereas no significant inhibition towards growth of fungal strains like Aspergillus Niger, Aspergillus flavus and Lasiodiplodia theobromae. Analyses of all these compounds show effective sperm herring DNA inhibition.     

New N-monofunctionalised 1,4,7-triazacyclononane complexes of iron

A series of 1,4,7-triazacyclononane derivatives of Fe(II) been investigated where changing the functionality of a pendant group has created different Fe(II) coordination environments. New examples of triazacyclononane supported iron dibromide complexes are presented as well as an iron complex bearing a novel 1,4,7-triazacyclononane containing a thiophene pendant-arm.     

Synthesis of cationic (arene)IronCp complexes via arene exchange

Rates and regioselectivity of arene exchange reactions in cationic fused arene Fe(II)Cp complexes were investigated. Thermal exchange of pyrene, naphthalenes, and cyclooctatetraene occurs in the temperature range of 90-140 °C. The most labile complex in the series studied is [(η⁶-(1-4,4a,8a)-1,4-dimethoxynaphthalene)FeCp][PF₆] having the FeCp coordinated to the substituted ring. Pyrene and other naphthalene complexes come next, followed by the cyclooctatetraene complex. Phenanthrene, veratrol, and dihydronaphthalene do not undergo exchange at temperatures up to 130 °C. With Me- and OMe-substituted naphthalenes, exchange is reversible and favors the product having the metal coordinated to the non-substituted ring. The X-ray crystal structures of the two regioisomeric 1,4-dimethoxynaphthalene complexes were determined. Arene exchange in fused arene complexes is shown to be a useful synthetic method and provides new arene complexes cleanly and efficiently. The method is particularly attractive for arenes that contain functionalities that are not compatible with the Lewis acid-mediated routes. The starting materials are readily accessible via the TiCl₄-assisted Cp exchange in ferrocene.     

Syntheses of di-hydrocarbyl derivatives of carbonyl phosphine complexes of iron

Complexes cis,trans-Fe(CO)₂(PMe₃)₂RR′ (R = CH₃, R′ = Ph (2); R = CH₃, R′ = CHCH₂ (3); R = CHCH₂, R′ = Ph (4); R = R′ = CHCH₂ (5); R = R′ = CH₃ (6)) were prepared by reaction of cis,trans-Fe(CO)₂(PMe₃)₂RCl (1) with organolithium reagents LiR′. All complexes were characterized in solution by IR and ¹H, ³¹P and, in a few cases, ¹³C NMR mono- and bi-dimensional spectroscopies. Complexes 5 and 6 were structurally characterized by X-ray diffractometric methods. In solution complexes 2, 3 and 4 undergo slowly coupling of the σ-hydrocarbyl substituents leading to Fe(CO)₃(PMe₃)₂ and other decomposition products. Complex 6 was very stable in solution in the absence of nucleophiles and in the solid state. Complex 5 transformed through intramolecular coupling of the vinyl groups into Fe(CO)(PMe₃)₂(η⁴-butadiene) (7), which was characterized in solution by IR and NMR spectroscopies.     

Synthesis of iron thienyl complexes

Dimetallation of thiophene (TH₂), bithiophene (BTH₂) and 3,6-dimethyl[3,2-b]thienothiophene (TTH₂) using a slight excess of butyl lithium, followed by the addition of [FeCp(CO)₂I], resulted in the formation of [2,5-{FeCp(CO)₂}₂T], 1 and [2-{FeCp(CO)₂}T]. The analogous reaction with bithiophene as precursor afforded similar products [2,2′-{FeCp(CO)₂}₂BT] 2 and [2-{FeCp(CO)₂}BTH] 3. In addition to the expected mono- ([2-{FeCp(CO)₂}-TTH] 4) and binuclear ([2,2′-{FeCp(CO)₂}₂-TT] 5) products, dimetallation of 3,6-dimethyl[3,2-b]thienothiophene and the subsequent reaction with [FeCp(CO)₂I] yielded carbonyl inserted mono-([2-{FeCp(CO)₂}C(O)-{TT}₂H] 6) and binuclear ([2-{FeCp(CO)₂}C(O)-{TT}₂-2′-{FeCp(CO)₂}] 7) carbon-carbon coupled products. The precursor [2,7-{SnMe₃}₂-TT] (8) was prepared and reacted with [FeCp(CO)(PEt₃)I] in the presence of a palladium catalyst to afford [2-{FeCp(CO)(PEt₃)}C(O)-{TT}₂-2′-{SnMe₃}] 10.     

Electrochemistry and spectroscopy of sulfate and thiosulfate complexes of iron porphyrins

The electrochemical and spectroscopic properties of the complex formed by the addition of thiosulfate to ferric porphyrins were examined. The NMR spectrum of the thiosulfate-ferric porphyrin complex was consistent with a high-spin ferric complex, while the EPR spectrum at liquid nitrogen temperatures indicated that the complex under these conditions was low-spin. Such behavior has been previously observed for other ferric porphyrin complexes. The visible spectra were characterized by a shift in the Soret band to higher energies, with smaller changes in the longer wavelength region. The complex was reasonably stable in DMF, but slowly reduced over several hours to Fe^II(TPP) and S₄O₆ ²⁻. The voltammetric behavior of the thiosulfate complex in DMF consists of two waves, the first of which was irreversible. The ferric/ferrous reduction in the presence of thiosulfate was shifted negatively about 400 mV, compared to the Fe(TPP)(Cl) reduction. The visible, NMR and EPR spectra were most consistent with a Fe-S bonded ferric porphyrin-thiosulfate complex, Fe(P)(SSO₃)⁻. The kinetics of the reduction of ferric porphyrin by thiosulfate in DMSO indicated an autocatalytic mechanism, where the first step is the formation of the catalyst. The identity of the catalyst could not be determined because it must be present at low concentrations, but it is formed from the reaction of the ferric complex with thiosulfate. Coordination of thiosulfate to the porphyrin was not necessary for the reduction to occur, and the reduction of Fe(TPP)(Cl) by thiosulfate was accelerated by the addition of sulfate. Under these conditions, sulfate had replaced thiosulfate as the axial ligand for the ferric porphyrin. In the presence of sulfate, the reduction occurred in a single kinetic pseudo-first order step.     

Synthesis and characterization of iron and ruthenium complexes bearing P-N ligands based on 8-hydroxyquinoline

The synthesis of bidentate aminophosphine ligands (PN^quin) based on 8-hydroxyquinoline is described. These ligands react with cis-Fe(CO)₄Br₂ to give selectively octahedral complexes of the type cis,cis-Fe(PN^quin)(CO)₂Br₂. There is only one isomer formed where the two CO and the two bromide ligands adopt a cis configuration. The reaction of [RuCp(CH₃CN)₃]PF₆ with PN^quin ligands affords the halfsandwich complexes [RuCp(PN^quin)(CH₃CN)]PF₆ in high isolated yields. Likewise, treatment of [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ with PN^quin in the presence of AgCF₃SO₃ affords halfsandwich complexes of the type [Ru(η⁶-p-cymene)(PN^quin)Cl]CF₃SO₃. All ligands and complexes are characterized by NMR and IR spectroscopy. The X-ray structure of representative compounds is reported. In addition, the relative stability of isomeric structures and conformers of Fe(PN^quin-Ph)(CO)₂Br₂ is studied by means of DFT calculations.     

Synthesis and structural analysis of calix[4]arene-supported iron(III) complexes

The paper describes the reactivity of calix[4]arene dialkyl- or -silylethers H₂R₂calix, R=Me (1), Bz (2), or SiMe₃ (3) (p-tert.butyl-calix[4]arene=H₄calix), towards the iron(III) complex [FeCl(NSiMe₃)₂(thf)] 4. Bis(silylation) of H₄calix was achieved using a mixture of NEt₃ and Me₃SiCl as silylating agent, which is probably the most convenient and cheapest way for the preparation of H₂(Me₃Si)₂calix 3. [FeCl(N{SiMe₃}₂)₂(thf)] 4 has been obtained from the reaction of [FeCl₃] and commercially available K[N(SiMe₃)₂] in THF. The reactions of 4 with H₂Me₂calix and H₂Bz₂calix afford mononuclear iron(III) chloro compounds [FeCl(R₂calix)] 5 (R=Me) and 6 (R=Bz). The usage of calix[4]arene silyl ether 3 leads to a dinuclear complex [Fe₂({Me₃Si}calix)₂] 7, presumably under Me₃SiCl cleavage of a mononuclear calixarene iron(III) chloro complex. The calix[4]arene ether stabilized iron(III) chloro complexes are susceptible to nucleophilic substitution reactions, as exemplified by the reaction of 5 with sodium azide yielding an azido complex [Fe(N₃)(Me₂calix)] 8. The molecular structures of 4, 5, 6, 7, and 8 in the solid state have been determined by X-ray diffraction.     

Simple synthesis of organo-iron complexes from iron-sandwich raw materials using visible light

Piano-stool organo-iron complexes [CpFeL₁L₂L₃]⁺ bearing a variety of ligands (Cp = η⁵-C₅H₅, L = neutral 2-electron ligand) can be readily synthesized by visible photolysis of any member of the family of [FeCp(arene)][PF₆] sandwich complexes (arene = η⁶-arene) including those in which the arene is mono-, bis or trisubstituted. A short review is provided for these reactions and processes and their applications in organo-iron synthesis.     

Neighbouring metal induced oxidative addition at the iron centre amongst the iron-arylpyridylphosphine complexes

Complexes of the type (η⁴-BuC₅H₅)Fe(CO)₂(P) (P = PPh₂Py 3, PPhPy₂4, PPy₃5; Py = 2-pyridyl) were satisfactorily prepared. Upon treatment of 3 with M(CO)₃(EtCN)₃ (M = Mo, 6a; W, 6b), the pyridyl N-atom could be coordinated to the metal M, which then eliminates a CO ligand from the Fe-centre and induced an oxidative addition of the endo-C-H of (η⁴-BuC₅H₅). This results in a bridged hydrido heterodimetallic complex [(η⁵-BuC₅H₄)Fe(CO)(μ-P,N-PPh₂Py)(μ-H)M(CO)₄] (M = Mo, 7a, 81%; W, 7b, 76%). The reaction of 4 or 5 with 6a,b did not give the induced oxidative addition, although these complexes contain more than one pyridyl N-atom. The reaction of 4 with M(CO)₄(EtCN)₂ (M = Mo, 9a; W, 9b) produced heterodimetallic complexes [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′-PPhPy₂)M(CO)₄] (M = Mo, 10a, 81%; W, 10b, 83%). Treatment of 5 with 6a,b gave [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′,N″-PPy₃)M(CO)₃] (M = Mo, 12a, 96%; W, 12b, 78%).     

Reaction of iron and ruthenium halogenide complexes with GaCp and AlCp: Insertion, Cp transfer reactions and orthometallation

The reactions of the Fe(II) and Ru(II) halogenide complexes [Fe(PPh₃)₂Br₂], [Fe(NCCH₃)₂Br₂], [Ru(PPh₃)₃Cl₂], and [Ru(dmso)₄Cl₂] with GaCp^∗ and AlCp^∗, respectively, are investigated. The reactions of [FeBr₂L₂] with ECp^∗ exclusively proceed via Cp^∗ transfer, leading to [FeCp^∗(GaCp^∗)(GaBr₂)(PPh₃)] (1) (L = PPh₃, E = Ga), [FeCp^∗(GaCp^∗)₂ (GaBr₂)] (2) (L = NCCH₃, E = Ga) and [FeCp^∗(μ³-H)(κ²-(C₆H₄)PPh₂)(AlCp^∗)(AlBr₂)] (3) (L = PPh₃, E = Al), the latter of which is formed via orthometallation of one PPh₃ ligand. The reaction of [Ru(dmso)₄Cl₂] leads to the homoleptic complex [Ru(GaCp^∗)₆Cl₂] (4) in high yields, while [Ru(PPh₃)₃Cl₂] gives 4 in rather low yields. The reason for this difference in reactivity is investigated and it is shown that Cp^∗ transfer and orthometallation are the limiting side reactions of the reaction of [Ru(PPh₃)₃Cl₂] with GaCp^∗. All compounds were characterized by NMR spectroscopy, and single crystal X-ray diffraction studies were performed for 1, 3, and 4.     

Nickel(II) and copper(II) complexes of mixed benzene-triazolehemiporphyrazines

The kinetics of substitution reactions of [η-CpFe(CO)₃]PF₆ with PPh₃ in the presence of R-PyOs have been studied. For all the R-PyOs (R = 4-OMe, 4-Me, 3,4-(CH)₄, 4-Ph, 3-Me, 2,3-(CH)₄, 2,6-Me₂, 2-Me), the reactions yeild the same product [η⁵-CpFe(CO)₂PPh₃]PF₆, according to a second-order rate law that is first order in concentrations of [η⁵-CpFe(CO)₃]PF₆ and of R-PyO but zero order in PPh₃ concentration. These results, along with the dependence of the reaction rate on the nature of R-PyO, are consistent with an associative mechanism. Activation parameters further support the bimmolecular nature of the reactions: ΔH^≠ = 13.4 ± 0.4 kcal mol⁻¹, ΔS^≠ = −19.1 ± 1.3 cal k⁻¹ mol⁻¹ for 4-PhPyO; ΔH^≠ = 12.3 ± 0.3 kcal mol⁻¹, ΔS^≠ = 24.7 ±1.0 cal K⁻¹ mol⁻¹ for 2-MePyO. For the various substituted pyridine N-oxides studied in this paper, the rates of reaction increase with the increasing electron-donating abilities of the substituents on the pyridine ring or N-oxide basicities, but decrease with increasing ¹⁷O chemical shifts of the N-oxides. Electronic and steric factors contributing to the reactivity of pyridine N-oxides have been quantitatively assessed.     

Molecular structures of Fe(II) complexes with mono- and di-protonated ethylenediamine-N,N,N′,N′-tetraacetate (Hedta and H2edta), as determined by X-ray crystal analyses

The molecular structure of the title complexes [Fe(H₂O)₄][Fe(Hedta)(H₂O)]₂ · 4H₂O (I) and [Fe(H[₂edta)(H₂O)] · 2H₂O (II) have been determined by single-crystal X-ray analyses. The crystal data are as follows: I: monoclinic, P2₁/n, A = 11.794(2), B = 15.990(2), C = 9.206(2) Å, β = 90.33(1)°, V = 1736.1(5) ų, Z = 2 and R = 0.030; II: monoclinic, C2/c, A = 11.074(2), B = 9.856(2), C = 14.399(2) Å, β = 95.86(1)°, V = 1563.3(4) ų, Z = 4 and R = 0.025. I is found to be isomorphous with the Mn^II analog reported earlier and to contain a seven-coordinate and approximately pentagonal-bipyramidal (PB) [Fe^II(Hedta)(H₂O]⁻ unit in which Hedta acts as a hexadentate ligand. The [Fe^II(H₂edta)(H₂O)] unit in II has also a seven-coordinate PB structure with the two protonated equatorial glycine arms both remaining coordinated, and thus bears a structural resemblance to the seven-coordinate [Co^II(H₂edta)(H₂O)] reported previously.     

Tuning redox and spin state properties of Fe(II) N-heterocyclic complexes via electronic/steric influence on metal-ligand binding

A series of complexes with the general formula [Fe(L)₂]²⁺, where L represents the tridentating 6-(N-3,5-dimethylpyrazolyl)2,2^′-bipyridine (L⁴); 6-(N-pyrazolyl-1-ylmethyl)-2,2^′-bipyridine (L⁵); and 6-(N-3,5-dimethylpyrazolyl-1-ylmethyl)-2,2^′-bipyridine (L⁶), were prepared and characterized. The room temperature solution magnetic susceptibility and redox properties of these compounds were investigated as a function of stepwise variation in the ligand structure. The Fe(III/II) couple was characterized by way of cyclic voltammetry using aprotic solvent conditions (acetonitrile) where each complex was observed to have reversible behavior. NMR methodology was used for measuring the magnetic susceptibilities where both [Fe(L⁴)₂]²⁺ and Fe(L⁵)₂]²⁺ exhibited diamagnetic low spin behavior; however, [Fe(L⁶)₂]²⁺ measured a μ_eff of 4.1 Bohr-magnetons indicating spin equilibrium predominantly in the high spin state.